Efficient PAHs removal and CO2 fixation by marine microalgae in wastewater using an airlift photobioreactor for biofuel production.

Microalgae cultures have emerged as a promising strategy in diverse areas, ranging from wastewater treatment to biofuel production, thus contributing to the search for carbon neutrality. These photosynthetic organisms can utilize the resources present in wastewater and fix atmospheric CO2 to produce biomass with high energy potential. In this study, the removal efficiency of Polycyclic Aromatic Hydrocarbons (PAHs), CO2 fixation and lipid content in the biomass produced from microalgae grown in airlift photobioreactor were evaluated. Four mesoscale cultures were carried out: Control (Seawater + Conway medium), Treatment A (Oil Produced Water + Poultry Effluent Water), Treatment B (Poultry Effluent Water + Seawater) and Treatment C (Oil Produced Water, Seawater and nutrients). The impact of biostimulation, through the addition of nutrients, on PAHs removal efficiency (up to 90%), CO2 fixation rate (up to 0.20 g L-1 d-1) and the composition of the generated biomass was observed. Primarily, the addition of nitrates to the culture medium impacted CO2 fixation rate of the microalgae. In addition, a direct correlation was observed between PAHs removal and lipid accumulation in the biomass, up to 36% in dry weight, demonstrating microalgae's ability to take advantage of the organic carbon (PAHs) present in the culture medium to generate lipid-rich biomass. The concentration of polysaccharides in the biomass obtained did not exceed 12% on a dry weight basis, and the Higher Heating Value (HHV) ranged between 17 and 21 MJ kg-1. Finally, the potential of generating hydrogen through pyrolysis was highlighted, taking advantage of the characteristics of biomass as a conversion route to produce biofuels. These results show that microalgae are effective in wastewater treatment and have great potential in producing biofuels, thus contributing to the transition towards more sustainable energy sources and climate change mitigation.

Ethanol, acetaldehyde, and methanol in the gas phase and rainwater in different biomes and urban regions of Brazil.

In the context of the increasing global use of ethanol biofuel, this work investigates the concentrations of ethanol, methanol, and acetaldehyde, in both the gaseous phase and rainwater, across six diverse urban regions and biomes in Brazil, a country where ethanol accounts for nearly half the light-duty vehicular fuel consumption. Atmospheric ethanol median concentrations in São Paulo (SP) (12.3 ± 12.1 ppbv) and Ribeirão Preto (RP) (12.1 ± 10.9 ppbv) were remarkably close, despite the SP vehicular fleet being ∼13 times larger. Likewise, the rainwater VWM ethanol concentration in SP (4.64 ± 0.38 µmol L-1) was only 26 % higher than in RP (3.42 ± 0.13 µmol L-1). This work demonstrated the importance of evaporative emissions, together with biomass burning, as sources of the compounds studied. The importance of biogenic emissions of methanol during forest flooding was identified in campaigns in the Amazon and Atlantic forests. Marine air masses arriving at a coastal site led to the lowest concentrations of ethanol measured in this work. Besides vehicular and biomass burning emissions, secondary formation of acetaldehyde by photochemical reactions may be relevant in urban and non-urban regions. The combined deposition flux of ethanol and methanol was 6.2 kg ha-1 year-1, avoiding oxidation to the corresponding and more toxic aldehydes. Considering the species determined here, the ozone formation potential (OFP) in RP was around two-fold higher than in SP, further evidencing the importance of emissions from regional distilleries and biomass burning, in addition to vehicles. At the forest and coastal sites, the OFP was approximately 5 times lower than at the urban sites. Our work evidenced that transition from gasoline to ethanol or ethanol blends brings the associated risk of increasing the concentrations of highly toxic aldehydes and ozone, potentially impacting the atmosphere and threatening air quality and human health in urban areas.

How to overcome the difficulty in assaying Ni in biodiesel samples? Extraction induced by microemulsion breaking and square wave adsorptive stripping voltammetry could be the answer.

Herein, a simple, green, and relatively inexpensive approach to determine nickel (Ni) in biodiesel samples by square wave adsorptive cathodic stripping voltammetry (SWAdCSV) is presented. A method based on the accumulation of Ni as Ni(II)-dimethylglyoxime (Ni(II)(HDMG)2) on the glassy carbon electrode was carried out in a solution containing the aqueous phase extract (APhEx) obtained from an extraction induced by microemulsion breaking (EIMB), which was achieved by adding a few microliters of ultrapure water to a microemulsion composed of biodiesel, n-propanol and a diluted HNO3 solution. The LOD and LOQ were 0.2 µg L-1 and 0.8 µg L-1, respectively, and the accuracy was evaluated by recovery assays of spiked samples and by analyzing a standard reference material. Results obtained from a comparative method (HR-CS GF AAS) were also used for this evaluation. The method was applied to biodiesel samples produced from different feedstocks. To the best of the authors knowledge, it is the first time that: 1) Ni in biodiesel is determined by a voltammetric method; 2) EIMB is applied to extract Ni from this matrix and 3) this type of sample preparation method is used with adsorptive stripping voltammetry.

Distribution, screening and biochemical characterization of indigenous microalgae for bio-mass and bio-energy production potential from three districts of Pakistan / Distribuição, triagem e caracterização bioquímica de microalgas indígenas para a produção de biomassa e bioenergia de três distritos do Paquistão

Trend of biofuel production from microalgal triacylglycerols is enhancing, because this substrate is a good sustainable and advantageous alternative to oil and gas fuel. In the present study, indigenous micro algal isolates were screened from water (n=30) and soil (n=30) samples collected from three districts of Punjab, Pakistan to evaluate their biofuel production potential. The samples were inoculated on BG - 11 agar medium plates by incubating at room temperature of 25°C providing 1000 lux for 16h light cycle followed by 8h of dark cycle for 15 d. Water samples were found to be rich in microalgae and 65.33% microalgae (49 isolates) were isolated from Faisalabad district. On the basis of microscopic morphology microalgal isolates (n=180) were selected and subjected to lipid detection by Nile red staining assay. Nile red positive isolates (n=23) were processed for biochemical (lipid, protein and carbohydrates) characterization. AIN63 isolate showed higher lipids (17.4%) content as detected by micro vanillin assay. Algal isolate AIN128 showed best protein contents (42.91%) detected by Bradford assay and AIN172 isolate showed higher carbohydrate contents (73.83%) as detected by anthrone assay. The selected algal isolates were also analyzed by Fourier transform infrared (FTIR) spectroscopy for confirmation of carbohydrate, protein and lipid analysis. These indigenous algae have the potential for in-vitro biofuel production from agricultural waste.

A tendência de produção de biocombustíveis a partir de triacilgliceróis de microalgas está aumentando, porque esse substrato é uma boa alternativa sustentável e vantajosa ao combustível de petróleo e gás. No presente estudo, isolados de microalgas indígenas foram selecionados de amostras de água (n = 30) e solo (n = 30) coletadas em três distritos de Punjab, Paquistão, para avaliar seu potencial de produção de biocombustíveis. As amostras foram inoculadas em placas de meio BG ­ 11 agar por incubação em temperatura ambiente de 25°C proporcionando 1000 lux por 16h de ciclo claro seguido de 8h de escuro por 15 dias. As amostras de água foram ricas em microalgas e 65.33% de microalgas (49 isolados) foram isolados do distrito de Faisalabad. Com base na morfologia microscópica, isolados de microalgas (n = 180) foram selecionados e submetidos à detecção de lipídios por ensaio de coloração com vermelho do Nilo. Isolados positivos para vermelho do Nilo (n = 23) foram processados ​​para caracterização bioquímica (lipídica, proteica e de carboidratos). O isolado AIN63 apresentou maior teor de lipídios (17.4%) conforme detectado pelo ensaio de microvanilina. O isolado de alga AIN128 apresentou os melhores teores de proteína (42.91%) detectados pelo ensaio de Bradford, e o isolado AIN172 apresentou maiores teores de carboidratos (73.83%), conforme detectado pelo ensaio de anthrone. Os isolados de algas selecionados também foram analisados ​​por espectroscopia de infravermelho com transformada de Fourier (FTIR) para confirmação da análise de carboidratos, proteínas e lipídios. Essas algas nativas têm potencial para a produção de biocombustíveis in vitro a partir de resíduos agrícolas.

Obtention of fatty acids and phenolic compounds from Colombian cashew (Anacardium occidentale) nut shells using pyrolysis: towards a sustainable biodiesel production.

Sustainable management of non-edible agricultural residues of cashew nut production is a concern in Colombia. Therefore, this study aimed to study the fatty acid content of a pyrolytic liquid obtained from cashew nut shells (CNSs) from the Vichada region in Colombia. Transesterification of pyrolytic liquid was conducted to obtain biodiesel at the micro-scale as the first approach for this valorization route. Proximal analysis of samples was carried out using advanced analytical techniques (UHPLC-MS and CG-MS) whereas phenolic content and antioxidant activity were determined. The production yield of pyrolytic liquid was 69.15 ± 5.07% weight (wt.), at 550 °C and 2h of pyrolysis and the liquid was rich in fatty acids (∼70% wt.) and long-chain phenols (∼18% wt.). Among the phenolic compounds in liquid, mainly unsaturated C15:4 cardanol was identified (82.1 ± 5.5 mg/g), whereas the antioxidant activity of pyrolytic liquid was 0.714 ± 0.030 TE/g. Moreover, the biodiesel yield was 81% using catalyst sodium methoxide (12% v), and 50 °C and 26 min for the reaction. The obtained biodiesel in the hexane fraction was rich in methyl trans-8-octadecanoate (20.9 % wt.) and methyl palmitate (14.3 % wt.), being the representative compounds in the biodiesel. Therefore, the results indicated that thermal conversion of CNSs for obtaining biodiesel on a one-step process is a suitable strategy for the management of toxic and non-edible cashew residues. Finally, this is the first work of its kind that propose in detail the composition of pyrolytic liquid obtained from Colombian cashew nut residues under the proximate analysis approach and using advanced analytical techniques.

Effect of crude glycerin supplementation via drinking water on feed intake, water intake and productive performance of dairy ewes.

This study was performed to determine the effects of crude glycerin (CG) supplementation in drinking water on DM and nutrient intake, milk production, milk composition, and serum glucose. Twenty multiparous Lacaune × East Friesian ewes were randomly distributed into four dietary treatments throughout the lactation cycle. Treatments consisted of doses of CG supplementation via drinking water as follows: (1) no CG supplementation, (2) 15.0 g CG/kg DM, (3) 30.0 g CG/kg DM, and (4) 45.0 g CG/kg DM. DM and nutrient intake were reduced linearly with CG supplementation. CG linearly reduced water intake when expressed as kg d-1. However, no effect of CG was observed when it was expressed as a percentage of body weight or metabolic body weight. The water to DM intake ratio was increased linearly with CG supplementation. No effect of CG doses on serum glucose was observed. The production of standardized milk decreased linearly with the experimental doses of CG. Protein, fat, and lactose yield were linearly reduced with the experimental doses of CG. Milk urea concentration was quadratically increased with CG doses. Feed conversion was quadratically increased by treatments during the pre-weaning period (P < 0.05), in which the worst values were observed when the ewes were supplemented with 15 and 30 g CG/kg DM. The N-efficiency was linearly increased with CG supplementation in drinking water. Our results suggest that dairy sheep can be supplemented with CG up to 15 g/kg DM in drinking water. Greater doses are not beneficial for feed intake, milk production, and the yield of milk components.

Atmospheric oxidation of furanones by •OH and •Cl radicals: In situ FTIR rate coefficient determinations, SAR and theoretical studies.

Gas-phase kinetics of the overall reactions of •OH and •Cl radicals with dihydrofuran-3(2H)-one (oxolan-3-one) and dihydro-2-methyl-3(2H)-furanone (2MTHF-3-one) were studied at 298 K and atmospheric pressure. The rate coefficients were determined using the relative method in a 480 L multipass glass reactor coupled to an FT-IR detection system. The rate coefficients found for oxolan 3-one and 2MTHF-one with •OH radicals (k1 and k2) and with •Cl atoms (k3 and k4) at 298 K and atmospheric pressure (in cm3 molecule-1 s-1) were: k1 = (1.86 ± 0.29) × 10-11, k2 = (2.64 ± 0.47) × 10-11, k3= (1.15 ± 0.28) × 10 -10, and k4 = (1.33 ± 0.32) × 10-10, respectively. Reactivity trends were developed by comparison with other similar structures and Fukui indices employed to determine the reactivity of different sites on the ring. The singularity of the reaction with •OH was assessed by computational studies which showed the formation of several stable hydrogen bonded complexes, explaining the difference with the reaction with the •Cl atom. SAR estimations of the rate coefficients were calculated and compared to the experimental values.

Regulation of lignocellulose degradation in microorganisms.

Microbial strategies for biomass deconstruction involve an incredible repertoire of enzymatic, structural, and regulatory proteins. From carbohydrate active enzymes to cellulosomes, bacteria, yeast, and filamentous fungi adapt their functional machinery to grow from alternative carbon sources such as lignocellulose and survive starvation. In that context, microbes must be able to sense, bind, degrade, and utilize lignin, cellulose, and hemicelluloses. Nature has developed specialized protein modules, RNA structures, and regulatory systems operating at a genomic, transcription, and translation level. This review briefly summarizes the main regulatory pathways involved in lignocellulose microbial degradation, including carbon catabolite repression; anti-sigma factors; regulatory RNA elements such as small RNAs, antisense RNA, RNA-binding proteins, and selective RNA processing and stabilization; and transcriptional regulators and unfolded protein response. Interplay with global regulators controlling pH response and nitrogen utilization is also revised.

Thermostabilizing mechanisms of canonical single amino acid substitutions at a GH1 ß-glucosidase probed by multiple MD and computational approaches.

ß-glucosidases play a pivotal role in second-generation biofuel (2G-biofuel) production. For this application, thermostable enzymes are essential due to the denaturing conditions on the bioreactors. Random amino acid substitutions have originated new thermostable ß-glucosidases, but without a clear understanding of their molecular mechanisms. Here, we probe by different molecular dynamics simulation approaches with distinct force fields and submitting the results to various computational analyses, the molecular bases of the thermostabilization of the Paenibacillus polymyxa GH1 ß-glucosidase by two-point mutations E96K (TR1) and M416I (TR2). Equilibrium molecular dynamic simulations (eMD) at different temperatures, principal component analysis (PCA), virtual docking, metadynamics (MetaDy), accelerated molecular dynamics (aMD), Poisson-Boltzmann surface analysis, grid inhomogeneous solvation theory and colony method estimation of conformational entropy allow to converge to the idea that the stabilization carried by both substitutions depend on different contributions of three classic mechanisms: (i) electrostatic surface stabilization; (ii) efficient isolation of the hydrophobic core from the solvent, with energetic advantages at the solvation cap; (iii) higher distribution of the protein dynamics at the mobile active site loops than at the protein core, with functional and entropic advantages. Mechanisms i and ii predominate for TR1, while in TR2, mechanism iii is dominant. Loop A integrity and loops A, C, D, and E dynamics play critical roles in such mechanisms. Comparison of the dynamic and topological changes observed between the thermostable mutants and the wildtype protein with amino acid co-evolutive networks and thermostabilizing hotspots from the literature allow inferring that the mechanisms here recovered can be related to the thermostability obtained by different substitutions along the whole family GH1. We hope the results and insights discussed here can be helpful for future rational approaches to the engineering of optimized ß-glucosidases for 2G-biofuel production for industry, biotechnology, and science.

Wort disinfection treatment with electron beam for bioethanol production

Microbial contamination of the wort during the fermentation process causes significant losses in ethanol production worldwide and creates a dependence of the industry on chemicals and antibiotics to control contamination. Therefore, this study used electron beam (e-beam) to disinfect wort from sugarcane (Saccharum officinarum L.) molasses and investigate the bioethanol fermentation. Four treatments (T0 - T3) were carried out using ionizing doses of radiation through the electron accelerator: 0 (control), 10, 20, and 40 kGy. Total mesophiles, total bacteria, sucrose, glucose, fructose, phenolics, flavonoids, hydroxymethylfurfural (5-HMF), and Furfural were measured. An alcoholic fermentation assay was performed after the irradiation process. The irradiated treatments showed no inversion of sugars and formation of the inhibitory by-products flavonoids, furfural and 5-HMF, except for the phenolic compounds. The lower dose tested (10 kGy) reduced more than 99.9 % of the total mesophiles and more than 99.99 % of the total bacteria in the substrate. In the fermentation, the irradiated worts presented similar (p > 0.05) yields (92, 93, and 94 %) and ethanol productivity levels (0.89, 0.88, and 0.87 g L-1 h-1, for T1, T2, and T3 respectively). However, all treatments presented higher yields and productivity (p < 0.05) when compared to the control (88 % and 0.85 g L-1 h-1), highlighting the possible use of e-beam in wort fermentation at a lower dose (10 kGy). This allows reduction in losses caused by microbial contamination, besides increasing fermentation yield and productivity with lower energy consumption.(AU)

Análisis de la mezcla de alcoholes en motor diésel

Debido a que el futuro del petróleo es incierto, en la búsqueda de los combustibles alternativos se ha encontrado que el alcohol es un fuerte candidato como combustible; los alcoholes inferiores más representativos son el metanol y el etanol, los cuales han demostrado en general baja miscibilidad, por lo que pueden generar una separación de fases al ser mezclados después de un cierto tiempo. La única manera de emplearlos en un motor diésel es mezclándolos con biodiésel o con surfactantes. Por el contrario, los alcoholes superiores tienen características más adecuadas para ser mezclados o empleados en el motor diésel. Por su parte, los éteres son una buena opción cuando se trate de combustión piloto en que se considere emplear combustibles gaseosos como el biogás o el syngas en motor diésel dual. En esta investigación se exploran las alternativas que existen para mejorar las características del alcohol, por ejemplo, mezclarlo con biodiésel, biogás, agua o nanopartículas, y también se analizan las emisiones que se producen con las mezclas generadas. El objetivo es indagar las diferencias entre los alcoholes inferiores y los alcoholes superiores de cadena larga, así como las mezclas que se pueden generar para mejorar el rendimiento del motor. Los resultados afirman que los alcoholes de cadena larga tienen mejores propiedades físico-químicas que los alcoholes de cadena corta; el butanol es el único combustible que puede ser transportado y almacenado en las mismas redes de tuberías actuales de los productos petroleros existentes. También se cuenta con la opción de usar el alcohol como combustible piloto en un motor diésel dual; esto puede servir para aplicar una enorme variedad de combustibles tanto líquidos como gaseosos, lo cual hace que las opciones en su aplicación se incrementen. Como conclusión, se recomienda explorar nuevas mezclas analizando sus sinergias con varios combustibles alternativos. La posibilidad de realizar el diesterol-BED genera resultados muy alentadores, por lo que se recomienda seguir haciendo análisis sobre esa línea para encontrar la mezcla óptima.

As the future of oil is uncertain and in the search for alternative fuels, it has been found that alcohol is a strong candidate as a fuel. The most representative lower alcohols are methanol and ethanol, which have generally demonstrated low miscibility so that they can generate phase separation when mixed after a certain period of time. The only way to use them in a diesel engine is to mix them with biodiesel or surfactants. By contrast, higher alcohols have more suitable characteristics to be mixed or used in the diesel engine. In the case of ethers they are a good option when it comes to pilot combustion considering using gaseous fuels such as biogas or syngas in dual diesel engine. This research explores the alternatives that exist to improve the characteristics of alcohol as it can be mixed with biodiesel, biogas, water or nanoparticles and also analyzes the emissions that are generated with the mixtures. The aim of this research is to explore the differences between lower alcohols and long chain upper alcohols, as well as the mixtures that can be generated to improve engine performance. The results of this research claim that long-chain alcohols have better physico-chemical properties than short-chain alcohols, butanol being the only fuel that can be transported and stored in the same current pipeline networks of existing oil products. There is also the option to use alcohol as a pilot fuel in a dual diesel engine. The latter can be used to apply a huge variety of both liquid and gaseous fuels, this makes the options in its application increase. As a conclusion of this work, it is recommended to explore new mixtures analyzing their synergies with various alternative fuels. The possibility of performing diesterol-BED generates very encouraging results, therefore it is recommended to continue to perform analyses on that line to find the optimal mixture.

Na busca por combustíveis alternativos porque o futuro do petróleo é incerto, verificou-se que o álcool é um forte candidato como combustível, onde os álcoois inferiores mais representativos são o metanol e o etanol, que, em geral, demonstraram baixa miscibilidade, de modo que podem gerar separação de fase quando misturadas após um determinado período de tempo, a única forma de as utilizar num motor diesel é misturá-las com biodiesel ou tensioactivos, pelo contrário, os álcoois superiores têm características mais adequadas para serem misturados ou utilizados no motor diesel, no caso dos éteres, são uma boa opção quando se trata de combustão piloto, considerando a utilização de combustíveis gasosos, como biogás ou gás de síntese em motores a diesel duplos, esta pesquisa explora as várias alternativas que existem para melhorar as características do álcool, pois pode ser misturado com biodiesel, biogás, água ou nanopartículas e também analisa as emissões que são geradas com as misturas geradas, O objetivo desta pesquisa é explorar as diferenças entre álcoois inferiores e álcoois superiores de cadeia longa, bem como as misturas que podem ser geradas para melhorar o desempenho do motor. Os resultados desta pesquisa afirmam que os álcoois de cadeia longa têm melhores propriedades físico-químicas do que os álcoois de cadeia curta, sendo o butanol o único combustível que pode ser transportado e armazenado nas mesmas redes de gasodutos atuais que os produtos petrolíferos existentes, há também a opção de usar álcool como combustível piloto em um motor diesel duplo, Este último pode ser usado para aplicar uma enorme variedade de combustíveis líquidos e gasosos, o que aumenta as opções em sua aplicação. Como conclusão deste trabalho recomenda-se explorar novas misturas analisando suas sinergias com vários combustíveis alternativos, a possibilidade de realizar diesterol-BED gera resultados muito encorajadores, portanto, recomenda-se continuar a realizar análises nessa linha para encontrar a mistura ideal.

Sustainable Feedstocks and Challenges in Biodiesel Production: An Advanced Bibliometric Analysis.

Biodiesel can be produced from vegetable oils, animal fats, frying oils, and from microorganism-synthesized oils. These sources render biodiesel an easily biodegradable fuel. The aim of this work was to perform an advanced bibliometric analysis of primary studies relating to biodiesel production worldwide by identifying the key countries and regions that have shown a strong engagement in this area, and by understanding the dynamics of their collaboration and research outputs. Additionally, an assessment of the main primary feedstocks employed in this research was carried out, along with an analysis of the current and future trends that are expected to define new paths and methodologies to be used in the manufacture of biodegradable and renewable fuels. A total of 4586 academic outputs were selected, including peer-reviewed research articles, conference papers, and literature reviews related to biodiesel production, in the time period spanning from 2010 to 2021. Articles that focused on feedstocks for the production of biodiesel were also included, with a search that returned 330 papers. Lastly, 60 articles relating to biodiesel production via sewage were specifically included to allow for an analysis of this source as a promising feedstock in the future of the biofuel market. Via the geocoding and the document analyses performed, we concluded that China, Malaysia, and India are the largest writers of articles in this area, revealing a great interest in biofuels in Asia. Additionally, it was noted that environmental concerns have caused authors to conduct research on feedstocks that can address the sustainability challenges in the production of biodiesel.

A new approach to obtain kinetic parameters of corn cob pyrolysis catalyzed with CaO and CaCO3.

A new approach is proposed to obtain the kinetic parameters of biomass pyrolysis mixed with calcium catalyst. This approach involves the optimization of least squares (LS) with the Coats-Redfern integral method to avoid mathematical biases that may appear when applying the linear regression approach. The method was applied to the TGA data of pyrolysis of corn cob and corn cob mixed with 20 or 40 % by weight of CaO or CaCO3 under N2 atmosphere at temperatures between 25 and 700 °C. For raw cob, r2 reaches 0.997. For corn cob mixed with 20 % by weight of CaO or CaCO3, r2 reached 0.996-0.998, and for 40 % by weight, r2 reached 0.836-0.957. Applying this method, the activation energy (EA) value of the raw cob pyrolysis is 58.35 kJ mol-1, while the addition of CaO or CaCO3 increases the EA to 69.33 and 66.07 kJ mol-1, respectively. The method is simple to use and allows reliable values of kinetic parameters.

Trends on CO2 Capture with Microalgae: A Bibliometric Analysis.

The alarming levels of carbon dioxide (CO2) are an environmental problem that affects the economic growth of the world. CO2 emissions represent penalties and restrictions due to the high carbon footprint. Therefore, sustainable strategies are required to reduce the negative impact that occurs. Among the potential systems for CO2 capture are microalgae. These are defined as photosynthetic microorganisms that use CO2 and sunlight to obtain oxygen (O2) and generate value-added products such as biofuels, among others. Despite the advantages that microalgae may present, there are still technical-economic challenges that limit industrial-scale commercialization and the use of biomass in the production of added-value compounds. Therefore, this study reviews the current state of research on CO2 capture with microalgae, for which bibliometric analysis was used to establish the trends of the subject in terms of scientometric parameters. Technological advances in the use of microalgal biomass were also identified. Additionally, it was possible to establish the different cooperation networks between countries, which showed interactions in the search to reduce CO2 concentrations through microalgae.

Root nitrate uptake in sugarcane (Saccharum spp.) is modulated by transcriptional and presumably posttranscriptional regulation of the NRT2.1/NRT3.1 transport system.

KEY MESSAGE: Nitrate uptake in sugarcane roots is regulated at the transcriptional and posttranscriptional levels based on the physiological status of the plant and is likely a determinant mechanism for discrimination against nitrate. Sugarcane (Saccharum spp.) is one of the most suitable energy crops for biofuel feedstock, but the reduced recovery of nitrogen (N) fertilizer by sugarcane roots increases the crop carbon footprint. The low nitrogen use efficiency (NUE) of sugarcane has been associated with the significantly low nitrate uptake, which limits the utilization of the large amount of nitrate available in agricultural soils. To understand the regulation of nitrate uptake in sugarcane roots, we identified the major canonical nitrate transporter genes (NRTs-NITRATE TRANSPORTERS) and then determined their expression profiles in roots under contrasting N conditions. Correlation of gene expression with 15N-nitrate uptake revealed that under N deprivation or inorganic N (ammonium or nitrate) supply in N-sufficient roots, the regulation of ScNRT2.1 and ScNRT3.1 expression is the predominant mechanism for the modulation of the activity of the nitrate high-affinity transport system. Conversely, in N-deficient roots, the induction of ScNRT2.1 and ScNRT3.1 transcription is not correlated with the marked repression of nitrate uptake in response to nitrate resupply or high N provision, which suggested the existence of a posttranscriptional regulatory mechanism. Our findings suggested that high-affinity nitrate uptake is regulated at the transcriptional and presumably at the posttranscriptional levels based on the physiological N status and that the regulation of NRT2.1 and NRT3.1 activity is likely a determinant mechanism for the discrimination against nitrate uptake observed in sugarcane roots, which contributes to the low NUE in this crop species.

Physicochemical Characteristics of Biofuel Briquettes Made from Pecan (Carya illinoensis) Pericarp Wastes of Different Particle Sizes.

Pecan nut (Carya illinoensis) pericarp is usually considered as a waste, with no or low value applications. Its potential as a densified solid biofuel has been evaluated, searching for alternatives to generating quality renewable energy and reducing polluting emissions in the atmosphere, based on particle size, that is an important feedstock property. Therefore, agro-industrial residues from the pecan nut harvest were collected, milled and sieved to four different granulometry: 1.6 mm (N° 12), 0.84 mm (N° 20), 0.42 mm (N° 40), and 0.25 mm (N° 60), used as raw material for biofuel briquette production. The carbon and oxygen functional groups in the base material were investigated by Fourier transform infrared spectroscopy (FTIR) and proximate analyses were performed following international standards, for determining the moisture content, volatile materials, fixed carbon, ash content, and calorific value. For the biofuel briquettes made from base material of different particle sizes, the physical characteristics (density, hardness, swelling, and impact resistance index) and energy potential (calorific value) were determined to define their quality as a biofuel. The physical transformation of the pecan pericarp wastes into briquettes improved its quality as a solid biofuel, with calorific values from around 17.00 MJ/kg for the base material to around 18.00 MJ/kg for briquettes, regardless of particle size. Briquettes from sieve number 40 had the highest density (1.25 g/cm3). Briquettes from sieve number 60 (finest particles) presented the greater hardness (99.85). The greatest susceptibility to swelling (0.31) was registered for briquettes with the largest particle size (sieve number 20). The IRI was 200 for all treatments.

Effect of compacting conditions on the viscoelastic properties of banana leaf waste and briquette quality.

This study evaluated the effects of the temperature and pressure used when compacting banana leaves on viscoelastic properties and briquette quality. Banana leaves with 12.4% of humidity were milled at two ranges of average particle size. The briquetting was carried out in a cylinder-piston device coupled to a universal mechanical test machine, under different compacting temperatures (30 and 120 °C) and pressures (20, 40 and 60 MPa). Several parameters, including compacting module, porosity index, final density, critical density, compacting energy, compression ratio, higher heating value, and energy density, were investigated. The banana leaf particles smaller than 1.7 mm performed better during compaction, with low compacting resistance. Temperature showed less influence on final density than pressure. The increase of pressure contributed to decreasing the compacting module and to achieving denser briquettes. It was not necessary to apply high temperature to obtain briquettes with high final density and energy density. The optimum briquetting process parameters identified can be used to produce briquettes from banana leaves at an industrial scale with an extruder. Briquetting adds value to banana leaf waste and reduces environmental pollution.

Development of Microalgae Biodiesel: Current Status and Perspectives.

Microalgae are regarded as a promising source of biodiesel. In contrast with conventional crops currently used to produce commercial biodiesel, microalgae can be cultivated on non-arable land, besides having a higher growth rate and productivity. However, microalgal biodiesel is not yet regarded as economically competitive, compared to fossil fuels and crop-based biodiesel; therefore, it is not commercially produced. This review provides an overall perspective on technologies with the potential to increase efficiency and reduce the general costs of biodiesel production from microalgae. Opportunities and challenges for large-scale production are discussed. We present the current scenario of Brazilian research in the field and show a successful case in the research and development of microalgal biodiesel in open ponds by Petrobras. This publicly held Brazilian corporation has been investing in research in this sector for over a decade.

Gene Editing Technologies for Sugarcane Improvement: Opportunities and Limitations.

Plant-based biofuels present a promising alternative to depleting non-renewable fuel resources. One of the benefits of biofuel is reduced environmental impact, including reduction in greenhouse gas emission which causes climate change. Sugarcane is one of the most important bioenergy crops. Sugarcane juice is used to produce table sugar and first-generation biofuel (e.g., bioethanol). Sugarcane bagasse is also a potential material for second-generation cellulosic biofuel production. Researchers worldwide are striving to improve sugarcane biomass yield and quality by a variety of means including biotechnological tools. This paper reviews the use of sugarcane as a feedstock for biofuel production, and gene manipulation tools and approaches, including RNAi and genome-editing tools, such as TALENs and CRISPR-Cas9, for improving its quality. The specific focus here is on CRISPR system because it is low cost, simple in design and versatile compared to other genome-editing tools. The advance of CRISPR-Cas9 technology has transformed plant research with its ability to precisely delete, insert or replace genes in recent years. Lignin is the primary material responsible for biomass recalcitrance in biofuel production. The use of genome editing technology to modify lignin composition and distribution in sugarcane cell wall has been realized. The current and potential applications of genome editing technology for sugarcane improvement are discussed. The advantages and limitations of utilizing RNAi and TALEN techniques in sugarcane improvement are discussed as well.

Microalgae-based carbohydrates: A green innovative source of bioenergy.

Microalgae contribute significantly to the global carbon cycle through photosynthesis. Given their ability to efficiently convert solar energy and atmospheric carbon dioxide into chemical compounds, such as carbohydrates, and generate oxygen during the process, microalgae represent an excellent and feasible carbohydrate bioresource. Microalgae-based biofuels are technically viable and, delineate a green and innovative field of opportunity for bioenergy exploitation. Microalgal polysaccharides are one of the most versatile groups for biotechnological applications and its content can be increased by manipulating cultivation conditions. Microalgal carbohydrates can be used to produce a variety of biofuels, including bioethanol, biobutanol, biomethane, and biohydrogen. This review provides an overview of microalgal carbohydrates, focusing on their use as feedstock for biofuel production, highlighting the carbohydrate metabolism and approaches for their enhancement. Moreover, biofuels produced from microalgal carbohydrate are showed, in addition to a new bibliometric study of current literature on microalgal carbohydrates and their use.