Novel MRI-Based Pedicle Bone Quality Score Independently Predicts Pedicle Screw Loosening after Degenerative Lumbar Fusion Surgery.

Pedicle screw loosening after posterior lumbar fusion is associated with poor bone quality, which often determines screw pull-out strength, insertion torque, and vertebral body loading characteristics. Magnetic resonance imaging (MRI)-based vertebral bone quality (VBQ) score were associated with poor bone quality. Current evidence suggests that pedicle bone quality (PBQ) has a greater impact on screw stability. However, the correlation between MRI-based PBQ score and screw loosening has not been reported. PURPOSE: To introduce and evaluate an MRI-based PBQ score to determine its effectiveness in predicting pedicle screw loosening following lumbar fusion surgery. METHODS: The retrospective study analyzed 244 patients who underwent posterior lumbar interbody fusion (PLIF) with pedicle screws between December 2017 and December 2021, with CT and MRI imaging before surgery. Data collected included patient demographics and preoperative radiological data. Radiographic screw loosening was measured at 12 months postoperatively. Clinical assessments included pain visual analog scale (VAS) and Oswestry Disability Index (ODI) scores. The PBQ score was measured using MRI scans. We use univariate analysis for preliminary screening of the risk factors of screw loosening. Subsequent analysis involved multivariate logistic regression to identify independent predictive factors for screw loosening. We constructed the receiver operating characteristic (ROC) curve to ascertain the discriminative capacity of the PBQ score. The area under the curve (AUC) quantified its predictive accuracy. Additionally, we evaluated the association between PBQ score and screw loosening using Spearman's correlation analysis. RESULTS: Overall, 244 patients who underwent PLIF with pedicle screw fixation participated in this study, including 35 in the loosening group and 209 in the non-loosening group. PBQ score in the loosening group was significantly higher than that in the non-loosening group. On multivariate logistic regression, the higher PBQ score (OR = 8.481, 95% CI: 3.158-22.774; p < 0.001) and the lower mean Hounsfield unit (HU) value of L1-4 (OR = 0.967, 95% CI 0.951-0.984; p < 0.001) were the variables that significantly predicted screw loosening. The AUC for the PBQ score and HU value were 0.751 (95% CI: 0.673-0.828) and 0.702 (95% CI: 0.612-0.791). The PBQ score optimal cutoff to differentiate patients with loosening and with non-loosening was calculated as 3.045 with a sensitivity of 85.7% and specificity of 76.9%, while the optimal cutoff of the HU value was 151.5 with a sensitivity of 64.6% and specificity of 89.5%. CONCLUSIONS: The association between the PBQ score and the propensity for lumbar pedicle screw loosening was found to be substantial. As a predictive measure, the PBQ score outperformed the HU value in forecasting the likelihood of screw loosening post-posterior lumbar fusion.

Side specific differences of Hounsfield-Units in the osteoporotic lumbar spine.

Background: Gold standard for determining bone density as a surrogate parameter of bone quality is measurement of bone mineral density (BMD) by dual energy X-ray absorptiometry (DXA), most commonly performed on the lumbar spine (L1-L4). Computed tomography (CT) data are often available for surgical planning prior to spine procedures, but currently this information is not standardized for bone quality assessment. Besides, measuring the Hounsfield-Units (HU) is also of great importance in the context of biomechanical studies. This in vitro study aims in comparing BMD from DXA and HU based on diagnostic CT scans. In addition, methods are presented to quantify local density variations within bones. Methods: One hundred and seventy-six vertebrae (L1-L4) from 44 body donors (age 84.0±8.7 years) were studied. DXA measurements were obtained on the complete vertebrae to determine BMD, as well as axial CT scans with a slice thickness of 1 mm. Using Mimics Innovation Suite image processing software (Materialise NV, Leuven, Belgium), two volumes (whole vertebra vs. spongious bone) were formed for each vertebra, which in turn were divided in their left and right sides. From these total of six volumes, the respective mean HU was determined. HU of the whole vertebra and just spongious HU were compared with the BMD of the corresponding vertebrae. Side specific differences were calculated as relative values. Results: Whole bone and spongious HU correlated significantly (P>0.001; α=0.01) with BMD. A positive linear correlation was found, which was more pronounced for whole bone HU (R=0.72) than for spongious HU (R=0.62). When comparing the left and right sides within each vertebra, the HU was found to be 10% larger on average on one side compared to the opposite side. In some cases, the difference of left and right spongious bone can be up to 170%. There is a tendency for the side comparison to be larger for the spongious HU than for the whole vertebra. Conclusions: Determination of HU from clinical CT scans is an important tool for assessing bone quality, primarily by including the cortical portion in the calculation of HU. Unlike BMD, HU can be used to distinguish precisely between individual regions. Some of the very large side-specific gradients of the HU indicate an enormous application potential for preoperative patient-specific planning.

A Novel MRI-Based Paravertebral Muscle Quality (PVMQ) Score for Evaluating Muscle Quality and Bone Quality: A Comparative Study with the VBQ Score.

Purpose: This study aims to develop a novel MRI-based paravertebral muscle quality (PVMQ) score for assessing muscle quality and to investigate its correlation with the degree of fat infiltration (DFF) and the vertebral bone quality (VBQ) score of paravertebral muscles. Additionally, the study compares the effectiveness of the PVMQ score and the VBQ score in assessing muscle quality and bone quality. Methods: PVMQ scores were derived from the ratio of paravertebral muscle signal intensity (SI) to L3 cerebrospinal fluid SI on T2-weighted MRI. Image J software assessed paravertebral muscle cross-sectional area (CSA) and DFF. Spearman rank correlation analyses explored associations between PVMQ, VBQ scores, DFF, and T-scores in both genders. Receiver operating characteristic (ROC) curves compared PVMQ and VBQ scores' effectiveness in distinguishing osteopenia/osteoporosis and high paraspinal muscle DFF. Results: In this study of 144 patients (94 females), PVMQ scores were significantly higher in osteoporosis and osteopenia groups compared to normals, with variations observed between genders (P < 0.05). PVMQ showed stronger positive correlation with VBQ scores and DFF in females than males (0.584 vs 0.445, 0.579 vs 0.528; P < 0.01). ROC analysis favored PVMQ over VBQ for low muscle mass in both genders (AUC = 0.767 vs 0.718, 0.793 vs 0.718). VBQ was better for bone mass in males (0.737/0.865 vs 0.691/0.858), whereas PVMQ excelled for females (0.808/0.764 vs 0.721/0.718). Conclusion: The novel PVMQ score provides a reliable assessment of paravertebral muscle quality and shows a strong correlation with VBQ scores and DFF, particularly in females. It outperforms VBQ scores in evaluating muscle mass and offers valuable insights for assessing bone mass in females. These findings underscore the potential of the PVMQ score as a dual-purpose tool for evaluating both muscle and bone health, informing future research and clinical practice.

Genetic and environmental determinants of bone quality: a cross-sectional analysis of the Hungarian Twin Registry.

There is abundant evidence that bone mineral content is highly heritable, while the heritability of bone quality (i.e. trabecular bone score [TBS] and quantitative ultrasound index [QUI]) is rarely investigated. We aimed to disentangle the role of genetic, shared and unique environmental factors on TBS and QUI among Hungarian twins. Our study includes 82 twin (48 monozygotic, 33 same-sex dizygotic) pairs from the Hungarian Twin Registry. TBS was determined by DXA, QUI by calcaneal bone ultrasound. To estimate the genetic and environmental effects, we utilized ACE-variance decomposition. For the unadjusted model of TBS, an AE model provided the best fit with > 80% additive genetic heritability. Adjustment for age, sex, BMI and smoking status improved model fit with 48.0% of total variance explained by independent variables. Furthermore, there was a strong dominant genetic effect (73.7%). In contrast, unadjusted and adjusted models for QUI showed an AE structure. Adjustments improved model fit and 25.7% of the total variance was explained by independent variables. Altogether 70-90% of the variance in QUI was related to additive genetic influences. We found a strong genetic heritability of bone quality in unadjusted models. Half of the variance of TBS was explained by age, sex and BMI. Furthermore, the adjusted model suggested that the genetic component of TBS could be dominant or an epistasis could be present. In contrast, independent variables explained only a quarter of the variance of QUI and the additive heritability explained more than half of all the variance.

Vertebral bone quality score was associated with paraspinal muscles fat infiltration, but not modic classification in patients with chronic low back pain: a prospective cross-sectional study.

BACKGROUND: The lumbar vertebra and paraspinal muscles play an important role in maintaining the stability of the lumbar spine. Therefore, the aim of this study was to investigate the relationship between paraspinal muscles fat infiltration and vertebral body related changes [vertebral bone quality (VBQ) score and Modic changes (MCs)] in patients with chronic low back pain (CLBP). METHODS: Patients with CLBP were prospectively collected in four hospitals and all patients underwent 3.0T magnetic resonance scanning. Basic clinical information was collected, including age, sex, course of disease (COD), and body mass index (BMI). MCs were divided into 3 types based on their signal intensity on T1 and T2-weighted imaging. VBQ was obtained by midsagittal T1-weighted imaging (T1WI) and calculated using the formula: SIL1-4/SICSF. The Proton density fat fraction (PDFF) values and cross-sectional area (CSA) of paraspinal muscles were measured on the fat fraction map from the iterative decomposition of water and fat with the echo asymmetry and least-squares estimation quantitation (IDEAL-IQ) sequences and in/out phase images at the central level of the L4/5 and L5/S1 discs. RESULTS: This study included 476 patients with CLBP, including 189 males and 287 females. 69% had no Modic changes and 31% had Modic changes. There was no difference in CSA and PDFF for multifidus(MF) and erector spinae (ES) at both levels between Modic type I and type II, all P values>0.05. Spearman correlation analysis showed that VBQ was weakly negatively correlated with paraspinal muscles CSA (all r values < 0.3 and all p values < 0.05), moderately positive correlation with PDFF of MF at L4/5 level (r values = 0.304, p values<0.001) and weakly positively correlated with PDFF of other muscles (all r values<0.3 and all p values<0.001). Multivariate linear regression analysis showed that age (ß = 0.141, p < 0.001), gender (ß = 4.285, p < 0.001) and VBQ (ß = 1.310, p = 0.001) were related to the total PDFF of muscles. For MCs, binary logistic regression showed that the odds ratio values of age, BMI and COD were 1.092, 1.082 and 1.004, respectively (all p values ＜ 0.05). CONCLUSIONS: PDFF of paraspinal muscles was not associated with Modic classification. In addition to age and gender, PDFF of paraspinal muscles is also affected by VBQ. Age and BMI are considered risk factors for the MCs in CLBP patients.

Prediction of Screw Loosening After Dynamic Pedicle Screw Fixation With Lumbar Polyetheretherketone Rods Using Magnetic Resonance Imaging-Based Vertebral Bone Quality Score.

OBJECTIVE: To investigate the correlation between magnetic resonance imaging-based vertebral bone quality (VBQ) score and screw loosening after dynamic pedicle screw fixation with polyetheretherketone (PEEK) rods, and evaluate its predictive value. METHODS: A retrospective analysis was conducted on the patients who underwent dynamic pedicle screw fixation with PEEK rods from March 2017 to June 2022. Data on age, sex, body mass index, hypertension, diabetes, hyperlipidemia history, long-term smoking, alcohol consumption, VBQ score, L1-4 average Hounsfield unit (HU) value, surgical fixation length, and the lowest instrumented vertebra were collected. Logistic regression analysis was employed to assess the relationship between VBQ score and pedicle screw loosening (PSL). RESULTS: A total of 24 patients experienced PSL after surgery (20.5%). PSL group and non-PSL group showed statistical differences in age, number of fixed segments, fixation to the sacrum, L1-4 average HU value, and VBQ score (p < 0.05). The VBQ score in the PSL group was higher than that in the non-PSL group (3.56 ± 0.45 vs. 2.77 ± 0.31, p < 0.001). In logistic regression analysis, VBQ score (odds ratio, 3.425; 95% confidence interval, 1.552-8.279) were identified as independent risk factors for screw loosening. The area under the receiver operating characteristic curve for VBQ score predicting PSL was 0.819 (p < 0.05), with the optimal threshold of 3.15 (sensitivity, 83.1%; specificity, 80.5%). CONCLUSION: The VBQ score can independently predict postoperative screw loosening in patients undergoing lumbar dynamic pedicle screw fixation with PEEK rods, and its predictive value is comparable to HU value.

Enzymatic and Non-enzymatic Collagen Cross-Links and Fracture Occurrence in Type 1 Diabetes Patients.

Increased fracture risk in type 1 diabetes (T1D) patients is not fully captured by bone mineral density (BMD) by DXA. Advanced glycation end-products (AGEs) have been implicated in the increased fracture risk in T1D, yet recent publications question this. To test the hypothesis that enzymatic collagen cross-links rather than AGEs correlate with fracture incidence in T1D, we analyzed iliac crest biopsies from sex-matched, fracturing T1D patients (N = 5; T1DFx), 6 non-fracturing T1D patients (T1DNoFx), and 6 healthy subjects, by Raman microspectroscopy as a function of tissue age (based on double fluorescent labels), in intracortical and trabecular bone, to determine pyridinoline (Pyd), ε-N-Carboxymethyl-L-lysine, and pentosidine (PEN)). There were no differences in the clinical characteristics between the T1DFx and T1DNoFx groups. At trabecular forming surfaces, T1DFx patients had higher PEN and Pyd content compared to T1DNoFx ones. Previous studies have shown that elevated PEN does not necessarily correlate with fracture incidence in postmenopausal, long-term T1D patients. On the other hand, the elevated Pyd content in the T1DFx patients would be consistent with published studies showing a significant correlation between elevated trivalent enzymatic collagen cross-links and fracture occurrence independent of BMD. Collagen fibers with high Pyd content are more brittle. Thus, a plausible suggestion is that it is the enzymatic collagen cross-links that either by themselves or in combination with the adverse effects of increased AGE accumulation that result in fragility fracture in T1D.

The quality of bone and paraspinal muscle in the fragility osteoporotic vertebral compression fracture: a comprehensive comparison between different indicators.

PURPOSE: To evaluate the value of five indicators in predicting OVCF through a retrospective case-control study, and explore the internal correlation of different indicators. METHOD: We retrospectively enrolled patients over 50 years of age who had been subjected to surgery for fragility OVCF at China Japan Friendship Hospital from January 2021 to September 2023. Demographic characteristics, T-score based on dual-energy X-ray absorptiometry (DXA), CT-based Hounsfield unit (HU) value, vertebral bone quality (VBQ) score based on magnetic resonance imaging (MRI), relative cross-sectional area (rCSA) and the rate of fat infiltration (FI) of paraspinal muscle were collected. A 1:1 age- and sex-matched, fracture-free control group was established from patients admitted to our hospital for lumbar spinal stenosis or lumbar disk herniation. RESULTS: A total of 78 patients with lumbar fragility OVCF were included. All the five indicators were significantly correlated with the occurrence of OVCFs. Logistic regression analysis showed that average HU value and VBQ score were significantly correlated with OVCF. The area under the curve (AUC) of VBQ score was the largest (0.89). There was a significantly positive correlation between average T-score, average HU value and average total rCSA. VBQ score was significantly positive correlated with FI. CONCLUSION: VBQ score and HU value has good value in predicting of fragility OVCF. In addition to bone mineral density, we should pay more attention to bone quality, including the fatty signal intensity in bone and the FI in paraspinal muscle.

Value of different preoperative bone evaluation methods in predicting intraoperative screw insertion torque-a prospective clinical comparative trial.

BACKGROUND CONTEXT: Establishing good screw-bone structural stability is conducive to reducing the risk of postoperative screw loosening. Screw insertion torque is an objective index for evaluating screw-bone structural stability. Therefore, accurate prediction of screw insertion torque can improve the preoperative evaluation of patients, optimize the surgical plan, and improve the surgical effect. At present, the correlation between different bone assessment methods and screw insertion torque is unclear. PURPOSE: The aim of this study was to evaluate the correlation between different bone assessment methods and screw insertion torque and to optimize the predictive performance of screw insertion torque through mathematical modeling combined with different radiology methods. DESIGN: Prospective cross-sectional study. PATIENT SAMPLES: 77 patients with preoperatively available DXA, CT and MRI data who underwent spinal fixation surgeries between October 2022 and September 2023 and 357 sets of screw data were included in this analysis. OUTCOME MEASURES: Spinal, vertebrae-specific and screw trajectory's BMD were measured preoperatively by different imaging modalities. Intraoperative screw insertion torque was measured using an electronic torque wrench. METHODS: Pearson linear correlation, scatter plots and univariate linear regression were used to evaluate the correlation between different bone evaluation methods and screw insertion torque. Different bone evaluation methods were fitted into the prediction model of screw torque and the related equations were obtained. RESULTS: Screw insertion torque had the strongest positive correlation with the volumetric bone mineral density (vBMD) of the screw trajectory (Pedicle screw insertion torque (PSIT): R = 0.618, p<.001; Terminal screw insertion torque (TSIT): R = 0.735, p<.001). A weak negative correlation was found between the screw insertion torque and level specific vertebral bone quality (VBQ) (PSIT: R = -0.178, p=.001; TSIT: R = -0.147, p=.006). We also found that the PSIT was strongly correlated with the TSIT (R = 0.812, p<.001). CONCLUSIONS: Compared to other bone quality assessment methods, screw trajectory vBMD may be better predict the magnitude of screw insertion torque. In addition, we further optimized preoperative assessments by constructing a mathematical model to better predict screw insertion torque. In conclusion, clinicians should select appropriate preoperative bone quality assessment methods, identify potential low-torque patients, optimize surgical plans, and ultimately improve screw insertion accuracy and reduce postoperative screw loosening rate.

MRI-based pedicle bone quality score: correlation to quantitative computed tomography bone mineral density and its role in quantitative assessment of osteoporosis.

BACKGROUND CONTEXT: Bone quality in the pedicle region generally determines screw pullout strength, insertion torque, and vertebral body loading characteristics. Dual-energy X-ray absorptiometry (DEXA), as the gold standard for evaluating bone mineral density (BMD), cannot measure the BMD of specific parts, such as pedicle, and DEXA is limited in many ways. Recent studies have shown a correlation between the magnetic resonance imaging (MRI)-based vertebral bone quality (VBQ) score and BMD measured using DEXA or quantitative computed tomography (QCT). However, no studies have been reported on the MRI-based pedicle bone quality (PBQ) score. Moreover, few studies have investigated the relationship between MRI-based PBQ and osteoporosis. PURPOSE: To create a new site-specific MRI-based PBQ assessment method and assess its diagnostic capacity in patients with normal BMD and osteopenia/osteoporosis. STUDY DESIGN/SETTING: A retrospective study. PATIENT SAMPLE: A total of 156 patients underwent lumbar fusion surgery for chronic low back pain at our hospital between 2021 and 2022, with lumbar QCT and T1-weighted MRI performed before surgery. OUTCOME MEASURES: Correlation of the PBQ score with QCT BMD, and the association between the PBQ score and presence of osteopenia/osteoporosis. METHODS: BMD of the lumbar was calculated as the mean BMD of the L1 and L2 vertebral bodies on the basis of asynchronous QCT measurements. The PBQ score, which is the average of the bone quality values of both pedicles on the basis of site-specific T1-weighted sagittal MRI images, was calculated by dividing the median signal intensity of the L1-L4 pedicles by the signal intensity of the cerebrospinal fluid at the L3 level. The interobserver reliability of the PBQ score was assessed using the intraclass correlation coefficient (ICC). A receiver operating characteristic curve was drawn, and the area under the curve (AUC) was calculated to assess the predictive performance of PBQ for osteoporosis. The PBQ score was compared with QCT BMD, as the gold standard, using Pearson correlation analysis. RESULTS: In total, 156 patients participated in this study, including 51 in the Normal BMD group and 105 in the osteopenia/osteoporosis group. The PBQ score in the osteopenia/osteoporosis group was significantly higher than that in the normal BMD group (3.19±0.55 vs. 2.84±0.51, p<.001). The VBQ and PBQ scores were calculated by 2 authors and were in good agreement (intraclass correlation coefficient=0.949 and 0.929, respectively). Pearson's test showed a significant negative correlation between PBQ and QCT BMD (r=-0.4887, p<.001). The optimal cutoff PBQ score to differentiate patients with osteopenia/osteoporosis from those with normal BMD was 3.160, with a sensitivity of 66.7%, specificity of 72.5%, and AUC of 0.776. The PBQ score correlated more strongly with QCT BMD (r=-0.4887) than VBQ (r=-0.4078). CONCLUSIONS: In this study, we propose a novel, MRI-based pedicle-specific bone quality score. This is the first study to investigate the relationship between the PBQ score and QCT BMD. The PBQ score showed diagnostic utility, differentiating between patients with osteopenia/osteoporosis and those with normal BMD (AUC=0.776), and the PBQ score correlated more strongly with QCT BMD than VBQ.

A comparative radiographic study of bone density changes around titanium implants in the posterior mandible, preoperative, and postoperative.

Background: Implant success and the state of the surrounding bone require multiple measures, especially in humans, and this study aimed to identify the development of the state of the latter by means of radiographic examination performed during the period of osseointegration as well as investigate the changes in bone density that occur after implant installation and 2 months after functional loading. Implant success rates are affected by bone density at the implant site. Therefore, understanding changes in bone density after dental implant placement is essential, as it correlates with subsequent implant success. Materials and methods: Digital radiographs of 28 implants were taken and evaluated at four intervals: preoperatively, 1 and 3 months postoperatively, and 2 months following placement of the permanent prosthesis. Gray values were measured in different areas around the implants through analyzing X-ray images and measuring bone density around the implants using EzDent - 2D software. The aim of this study was to investigate changes in bone density around implants in three regions: apex, neck, and body, as well as to record average density values during the observation period by measuring digital image gray levels (the gray values of the digital radiographs). This was conducted to determine local bone densities in dental implant recipient sites and to study changes in local bone densities at different intervals, preoperatively and postoperatively and after placement of the prosthesis. Results: A decrease was observed in gray values proportional to reference values 1-month after implant insertion, but these increased at 3 months after insertion and continued to rise 2 months after placement of the prosthesis in the apical, body, and neck regions of the implant. Conclusion: Sensor-tuned radiography can be used as an effective method to support clinical follow-ups as well as measure changes in bone densities around implants in critical cases.

Correlations among MRI-based cervical and thoracic vertebral bone quality score, CT-based Hounsfield Unit score, and DEXA t-score in assessment of bone mineral density.

BACKGROUND: Further optimization of the validated vertebral bone quality (VBQ) score using magnetic resonance imaging (MRI) may expand its clinical utility for bone mineral density (BMD) assessment. This study evaluated the correlations among cervical and thoracic VBQ scores, the validated Hounsfield Unit (HU) measured on computed tomography (CT), and dual-energy x-ray absorptiometry (DEXA) values. METHODS: We retrieved the medical and radiographic records of 165 patients who underwent synchronous MRI of the cervical and thoracic spine, as well as DEXA and CT imaging of the spine obtained within 1 year of each other between 2015 and 2022. Radiographic data consisted of the MRI-based cervical and thoracic VBQ scores, CT-based HU, and DEXA T-scores of the spine and hip. Patient age, sex, body mass index (BMI), and ethnicity were also obtained. RESULTS: Mean cervical and thoracic VBQ scores were 3.99 ± 1.68 and 3.82 ± 2.11, respectively. Mean HU and DEXA T-scores of the spine and hip were 135.75 ± 60.36, -1.01 ± 1.15, and -0.47 ± 2.27. All correlations among VBQ, HU, and DEXA were insignificant except for weak correlations between cervical and thoracic VBQ, and cervical VBQ and HU. No correlations were observed between radiographic scores and patient age or BMI. No differences based on ethnicity or sex were observed with respect to cervical or thoracic VBQ, HU, or DEXA. CONCLUSION: Cervical and thoracic VBQ scores are distinct from Hounsfield Unit and DEXA values. VBQ scoring in the cervical and thoracic spine is not influenced by patient age, ethnicity, sex, or BMI.

Dietary effects of Sclerocarya birrea caffra seed cake replacing soyabean meal on physiology, meat and bone quality of indigenous chickens.

This study investigated marula seed cake (MSC) as alternative protein source (APS) replacing soyabean meal (SBM) in indigenous chicken diets. Four hundred, 3-week-old Boschveld chicks were randomly allocated to 5 iso-energetic-nitrogenous maize and SBM-based grower diets with 0, 10, 15, 20, and 25 % MSC, each with 5 replicate pens of 16 birds, in a completely randomised design (CRD), for 9 weeks. Results showed that dietary MSC quadratically decreased bird overall feed intake (FI) (P < 0.001) and body weight gain (BWG) (P < 0.01) as it linearly decreased the weights of hot carcass (HCW; P < 0.05), spleen (P < 0.05), jejunum (P < 0.05), ileum (P < 0.001), and caecum (P < 0.001). In contrast, MSC increased chicken serum glucose (P < 0.05), cholesterol (P = 0.001) and phosphate (P < 0.05) as it decreased its amylase activity (P < 0.01). Also, it decreased bird meat lightness at 45 min (P < 0.05) and its yellowness at 45 min (P < 0.001) and 24 h (P < 0.001) whilst it increased its redness at 45 min (P < 0.01) and 24 h (P < 0.05) post-slaughter. In addition, MSC decreased chicken bone medial diaphysis (P < 0.05) as it induced no effects (P > 0.05) on overall feed conversion efficiency (FCE) and all other parameters. In conclusion, feeding of ≤ 15 % dietary MSC is nutritionally safe for indigenous chickens whilst detrimental on bird appetite, growth and meat yield, however without significantly affecting their physiology, at higher inclusion levels.

Jawbone quality classification in dental implant planning and placement studies. A scoping review.

Aim: Cone beam computed tomography has become an attractive method for implant planning. However, in most cases, not all the information is taken advantage of and often the radiographic evaluation of bone quality is based on subjective assessment by the individual clinician. Therefore, the aim of this study was to examine classifications of bone tissue characteristics and methods for assessing them in dental implant planning and placement studies. Materials and Methods: Three databases (Pubmed, Scopus, Web of Science) were searched using specific index terms: "Bone quality, bone quantity, bone density, cone-beam CT and cone-beam computed tomography". Three reviewers selected titles and analyzed abstracts according to inclusion and exclusion criteria. Some descriptions of bone tissue characteristics (bone quality, density, and quantity) used before or during dental implant placement were selected and categorized. Results: The search yielded 442 titles. A total of 32 articles were selected and read in full text. Seventeen articles were considered relevant. Different classification systems were found to evaluate bone tissue characteristics as well as different examination protocols. Thirteen publications included in this review reported on bone quality and quantity using the Lekholm and Zarb classification. However, only four studies implemented and/or proposed modifications of the Lekholm and Zarb system. Four other publications described bone quality according to different classification systems such as Misch, University of California Los Angeles (UCLA), or Trisi and Rao. The assessment methods were often briefly described (or not described at all in one publication). Of the articles analyzed, five presented observer performance, whereas three presented diagnostic accuracy of the assessment method. Conclusion: Currently, there are different classification systems applied to dental implant planning and placement, particularly regarding whether bone quality or quantity affects treatment outcomes. However, most authors have not validated the diagnostic accuracy and reproducibility of the classification used. Therefore, it is necessary to develop a classification system consistent with characteristics of bone tissue, taking into consideration an adequate description of bone tissue assessment methods, their diagnostic accuracy, and observer performance.

Opportunistic use of lumbar computed tomography and magnetic resonance imaging for osteoporosis screening.

Compared with the healthy patients, patients with osteoporosis had a lower Hounsfield unit (HU) value and a higher vertebral bone quality (VBQ) score. Both the HU value and VBQ score can simply distinguish patients with osteoporosis (OP), with a cutoff value of HU value < 97.06 and VBQ score > 3.08. INTRODUCTION: The purpose of this study is to determine whether the opportunistic use of computed tomography (CT) or magnetic resonance imaging (MRI) is effective for identifying spine surgical patients with OP. METHODS: We retrospectively evaluated 109 lumbar spine surgery patients who received lumbar quantitative CT (QCT) and MRI. Using the area under the curve, the CT-based HU value and MRI-based VBQ score were calculated. Then, based on the QCT results, receiver operating characteristic (ROC) curves were constructed to determine the diagnostic performance of the HU value and VBQ score. RESULTS: The HU value was significantly lower in the OP group, and the VBQ score was significantly higher in the OP group. Using the area under the curve, the diagnostic performance of the HU value and VBQ score for OP were 0.959 and 0.880, respectively. The diagnostic threshold values determined with optimal sensitivity and specificity were an HU value of 97.06 and a VBQ score of 3.08. CONCLUSION: Opportunistic use of CT and MRI can simply distinguish patients with OP, which are expected to be potential alternatives to T-score for the osteoporosis screening.

The mylohyoid line is highly variable but does not affect the microarchitecture of the edentulous alveolar bone - an anatomical micro-CT study.

OBJECTIVES: To evaluate in the absence of teeth the variability of the mylohyoid line (ML), the microarchitecture of the adjacent bone, and whether the variable prominence/width of the ML is associated with the quality of the adjacent bone. METHODS: µCT scans of 28 human mandibles from anatomical specimens were analyzed. The following parameters were assessed in four edentulous areas (first and second premolar (PM), first, second, and third molar (M1/2/3)): ML width, cortical thickness (CtTh), average cortical- (Avg.Ct.BV/TV), and trabecular bone volume fraction (Avg.Tb.BV/TV). RESULTS: The ML width increased from the PM towards the M2 region, which also showed the highest variance (range: 0.4-10.2 mm). The CtTh showed a decrease in the M3 region, while Avg.Ct.BV/TV and Avg.Tb.BV/TV hardly differed among the regions. In the multivariable model on the effect of the various parameters on the ML width, only gender and tooth region were significant. Specifically, male specimens were associated with a wider ML width compared to female specimens and the M2 region was associated with a wider ML width compared to the other tooth regions. CONCLUSION: The ML width was not associated with the cortical and trabecular bone quality in the adjacent bone, while gender and tooth region had a significant effect. Specifically, the ML width was lower in female, but peaked in the M2 region with a median width of 3-4 mm. CLINICAL RELEVANCE: From a clinical point of view, it was confirmed that the ML is in general a highly variable structure, especially in the M2 region, but the ML width does not allow any conclusions on the bone quality. Altogether, this underlines the need for an individual and accurate diagnostic prior to any surgical intervention.

Genome-wide association study reveals the candidate genes of humerus quality in laying duck.

Bone plays a crucial role in poultry's health and production. However, during the selection and cage farming, there has been a decline in bone quality. As the development of breeding theory, researchers find that it's possible to enhance bone quality through selective breeding.This study measure 8 humerus quality in 260 samples of the 350-day-old female duck. By descripting the basic characteristic traits, mechanical property traits we found that all the bone quality traits had a large variable coefficient, especially mechanical properties trait (20-70%), indicating that there was a large difference in bone health status among laying ducks. The phenotypic correlations showed a high correlation between weight and density, diameter and perimeter, breaking and toughness (r = 0.52-0.68). And then, we performed the Genome-wide association study (GWAS) to reveal the candidate genes of humerus quality in ducks. Seven candidate protein-coding genes were identified with perimeter trait, and 52 protein-coding genes were associated with toughness trait. We also analysed the candidate region and performed KEGG and GO analyse for 75 candidate genes. Furthermore, the expression analyse of the above candidate genes in different stage of humerus and different tissues were performed. Finally, AP2A2, SMAD3, SMNDC1, NFIA, EPHB2, PMEPA1, UNC5C, ESR1, VAV3, NFATC2 deserve further focus. The obtained results can contribute to new insight into bone quality and provide new genetic biomarkers for application in duck breeding programs.

HT-2 mycotoxin and selenium deficiency: Effects on Femur development and integrity in Young mice.

Kashin-Beck Disease (KBD), an osteoarticular disorder, is potentially influenced by several factors, among which selenium deficiency and HT-2 mycotoxin exposure are considered significant. However, the combined effect of these factors on femoral development remains unclear, Conducted over eight weeks on forty-eight male mice categorized into control, selenium-deficient, and HT-2 toxin-exposed groups, including dual-exposure sets, this study comprehensively monitored body weight, bone metabolism markers, and cellular health. Employing biomechanical analysis, micro-computed tomography (micro-CT), and transmission electron microscopy (TEM), we unearthed a reduction in body weight due to HT-2 toxin alone, with selenium deficiency exacerbating these effects synergistically. Our results unveil that both factors independently affect bone metabolism, yet their confluence leads to a pronounced degradation of bone health parameters, including alterations in calcium, phosphorus, and vitamin D levels, alongside marked changes in osteoblast and osteoclast activity and bone cell structures. The notable damage to femoral cortical and trabecular architectures underscores the perilous interplay between dietary selenium absence and HT-2 toxin presence, necessitating a deeper understanding of their separate and joint effects on bone integrity. These discoveries underscore the imperative for a nuanced approach to toxicology research and public health policy, highlighting the pivotal influence of environmental and nutritional factors on skeletal well-being.

Multiscale effects of the calcimimetic drug, etelcalcetide on bone health of rats with secondary hyperparathyroidism induced by chronic kidney disease.

Chronic kidney disease-induced secondary hyperparathyroidism (CKD-SHPT) heightens fracture risk through impaired mineral homeostasis and elevated levels of uremic toxins (UTs), which in turn enhance bone remodeling. Etelcalcetide (Etel), a calcium-sensing receptor (CaSR) agonist, suppresses parathyroid hormone (PTH) in hyperparathyroidism to reduce excessive bone resorption, leading to increased bone mass. However, Etel's effect on bone quality, chemical composition, and strength is not well understood. To address these gaps, we established a CKD-SHPT rat model and administered Etel at a human-equivalent dose concurrently with disease induction. The effects on bone and mineral homeostasis were compared with a CKD-SHPT (vehicle-treated group) and a control group (rats without SHPT). Compared with vehicle-treated CKD-SHPT rats, Etel treatment improved renal function, reduced circulating UT levels, improved mineral homeostasis parameters, decreased PTH levels, and prevented mineralization defects. The upregulation of mineralization-promoting genes by Etel in CKD-SHPT rats might explain its ability to prevent mineralization defects. Etel preserved both trabecular and cortical bones with attendant suppression of osteoclast function, besides increasing mineralization. Etel maintained the number of viable osteocytes to the control level, which could also contribute to its beneficial effects on bone. CKD-SHPT rats displayed increased carbonate substitution of matrix and mineral, decreased crystallinity, mineral-to-matrix ratio, and collagen maturity, and these changes were mitigated by Etel. Further, Etel treatment prevented CKD-SHPT-induced deterioration in bone strength and mechanical behavior. Based on these findings, we conclude that in CKD-SHPT rats, Etel has multiscale beneficial effects on bone that involve remodeling suppression, mineralization gene upregulation, and preservation of osteocytes.

Opportunistic prediction of osteoporosis in patients with degenerative lumbar diseases: a simplified T12 vertebral bone quality approach.

BACKGROUND: Osteoporosis is one of the risk factors for screw loosening after lumbar fusion. However, the probability of preoperative osteoporosis screening in patients with lumbar degenerative disease is low. Therefore, the aim of this study was to investigate whether a simplified vertebral bone quality (VBQ) score based on T12 T1-MRI could opportunistically predict osteoporosis in patients with degenerative lumbar spine diseases. METHODS: We retrospectively analyzed cases treated for lumbar degenerative diseases at a single institution between August 2021 and June 2022. The patients were divided into three groups by the lowest T-score: osteoporosis group, osteopenia group, and normal bone mineral density (BMD) group. The signal intensity based on the T12 vertebral body divided by the signal intensity of the cerebrospinal fluid was calculated to obtain the simplified VBQ score, as well as the CT-based T12HU value and the traditional L1-4VBQ score. Various statistical analyses were used to compare VBQ, HU and DEXA, and the optimal T12VBQ threshold for predicting osteoporosis was obtained by plotting the receiver operating curve (ROC) analysis. RESULTS: Total of 166 patients were included in this study. There was a statistically significant difference in T12VBQ scores between the three groups (p < 0.001). Pearson correlation showed that there was a moderate correlation between T12VBQ and T-score (r=-0.406, p < 0.001). The AUC value of T12VBQ, which distinguishes between normal and low BMD, was 0.756, and the optimal diagnostic threshold was 2.94. The AUC value of T12VBQ, which distinguishes osteoporosis from non-osteoporosis, was 0.634, and the optimal diagnostic threshold was 3.18. CONCLUSION: T12VBQ can be used as an effective opportunistic screening method for osteoporosis in patients with lumbar degenerative diseases. It can be used as a supplement to the evaluation of DEXA and preoperative evaluation. TRIAL REGISTRATION: retrospectively registered number:1502-009-644; retrospectively registered number date:27 oct 2022.