Establishing a bone bank within a hospital setting in India: early insights from a tertiary care center in Northern India-a review article.

When addressing bone defects resulting from trauma, infection, or tumors, the use of allogenic bone is often necessary. While autografts are considered the standard, they have limitations and can lead to donor site morbidity. Consequently, there has been exploration into the feasibility of utilizing allogenic bone and bone graft replacements. Allogenic bone transplants are acquired from donors following rigorous procurement, sterile processing, and donor screening procedures. To ensure the safe storage and effective utilization of allograft material, a bone banking system is employed. Establishing and managing an orthopedic bone bank, entails navigating complex legal and medical organizational aspects. This paper examines the establishment and operation of bone banks in India, drawing upon our first-hand experience in managing one at a tertiary care center in Northern India.Level of evidence: Level IV.

Natural Affinity Driven Modification by Silicene to Construct a "Thermal Switch" for Tumorous Bone Loss.

Tumorous bone defects present significant challenges for surgical bio-reconstruction due to the dual pathological conditions of residual tumor presence and extensive bone loss following excision surgery. To address this challenge, a "thermal switch" smart bone scaffold based on the silicene nanosheet-modified decalcified bone matrix (SNS@DBM) is developed by leveraging the natural affinity between collagen and silicene, which is elucidated by molecular dynamics simulations. Benefitting from its exceptional photothermal ability, biodegradability, and bioactivity, the SNS@DBM "thermal switch" provides an integrated postoperative sequential thermotherapy for tumorous bone loss by exerting three levels of photothermal stimulation (i.e., strong, moderate, and nonstimulation). During the different phases of postoperative bioconstruction, the SNS@DBM scaffold realizes simultaneous residual tumor ablation, tumor recurrence prevention, and bone tissue regeneration. These biological effects are verified in the tumor-bearing nude mice of patient-derived tissue xenografts and critical cranium defect rats. Mechanism research prompts moderate heat stimulus generated by and coordinating with SNSs can upregulate osteogenic genes, promote macrophages M2 polarization, and intensify angiogenesis of H-type vessels. This study introduces a versatile approach to the management of tumorous bone defects.

A Novel Method to Assess Healing of Segmental Bone Defects using the Induced Membrane Technique.

OBJECTIVE: Clinical concerns exist regarding the quality of bony consolidation in the context of the induced membrane technique. This study evaluates the clinical process of bone grafting in the second stage of induced membrane bone union in patients with tibial bone defects to infer the possibility of non-union and establish a reliable and effective evaluation method combined with computed tomography (CT) to assess fracture healing. METHODS: Patients with tibial bone defects who underwent the induced membrane technique at our hospital between February 2017 and February 2020 were retrospectively analyzed. The Hounsfield unit (HU) values of the patients were evaluated at different times during the second stage of bone grafting. Bone healing at the boundary value of the 120 HU output threshold (-1024 HU-3071 HU) was directionally selected, and the changes in the growth volume of union (new bone volume [selected according to HU value]/bone defect volume) were compared with analyzing individual class bone union. Method 1 involved X-rays revealing that at least three of the four cortices were continuous and at least 2 mm thick, with the patient being pain free. For Method 2, new bone volume (selected according to HU value/bone defect volume) at the stage was compared with analyzing individual class healing. Receiver operating characteristic curve analysis was used for Methods 1 and 2. RESULTS: A total of 42 patients with a segmental bone defect with a mean age of 40.5 years (40.5 ± 8.3 years) were included. The relationship between bone graft volume and time variation was analyzed by single factor repeated variable analysis (F = 6.477, p = 0.016). Further, curve regression analysis showed that the change in bone graft volume over time presented a logarithmic curve pattern (Y = 0.563 + 0.086 × ln(X), Ra2 = 0.608, p = 0.041). ROC curve analysis showed that Method 2 is superior to Method 1 (AUC: 86.3% vs. 68.3%, p < 0.05). CONCLUSION: The induced membrane technique could be used to treat traumatic long bone defects, with fewer complications and a higher healing rate. The proposed imaging grading of HU (new bone volume/bone defect volume) can be used as a reference for the quality of bony consolidation with the induced membrane technique.

A study on the morphology of iliac crest based on the objectives of jaw bone defect reconstruction.

OBJECTIVES: to understand the morphological characteristics of iliac crest and provide advice and assistance for jaw bone reconstruction with iliac bone flap by evaluating the thickness and curvature of iliac crest. MATERIALS AND METHODS: 100 patients who had taken Spiral CT of the Abdominal region before surgeries between 2020 and 2022 were included in this study. 3D reconstruction images of the iliac bones were created. 5 vertical planes perpendicular to the iliac crest were made every 2 cm along the centerline of the iliac crest (VP2 ~ VP10). On these vertical planes, 4 perpendicular lines were made every 1 cm along the long axis of the iliac crest (D1 ~ D4). The thicknesses at these sites, horizontal angle (HA) of iliac crest and the distance between inflection point and the central point of anterior superior iliac spine (DIA) were measured. RESULTS: The thickness of iliac bone decreased significantly from D1 ~ D4 on VP6 ~ VP10 and from VP2 ~ VP10 on D3 and D4 level (P<0.05). HA of iliac crests was 149.13 ± 6.92°, and DIA was 7.36 ± 1.01 cm. Iliac bone thickness, HA and DIA had very weak or weak correlation with patient's age, height and weight. CONCLUSIONS: The average thicknesses of iliac crest were decreased approximately from front to back, from top to bottom. The thickness and curvature of the iliac crest were difficult to predict by age, height and weight. CLINICAL RELEVANCE: Virtual surgical planning is recommended before jaw bone reconstruction surgery with iliac bone flap, and iliac crest process towards alveolar process might be a better choice.

Description of the Pedicled Osteo-Muscular Flap of Split Temporal Muscle.

Background: Reconstruction of the head and neck is dominated by free flaps, and for bone reconstruction by fibula and scapula flaps. However, this choice is sometimes difficult to make in patients who cannot tolerate an extensive and lengthy surgical procedure. In addition, vascular micro-anastomoses are sometimes complicated in patients who have been previously irradiated. Pedicle flaps remain an option and can sometimes be considered as first choice for head and neck reconstruction. Purpose: In this study, we describe the feasibility of a split temporal muscle pedicled flap with coronal harvesting for a reconstruction that can reach the midline. Study design sample covariates: Ten fresh-frozen human cadaver heads were dissected, and the length of the split flap was noted, followed by the length of the non-split flap. Results: The mean length was 155.7 mm (± 20.0) for the split flap, from the point of rotation to the tip of the coronoid process. These results coincide with the tragus-midline distance, which makes it possible to consider reconstruction of the midline, especially the maxilla and the mandible, which has not yet been described in the literature. Conclusions and relevance: This technique would then allow a supply of pedicled vascularized bone for loco-regional reconstruction.

Case report: A left forearm mass with eccentric intramedullary ulnar destruction diagnosed as alveolar rhabdomyosarcoma and treated by wide resection and free vascularized fibular graft.

Background: Alveolar Rhabdomyosarcoma is a profoundly malignant soft-tissue sarcoma that predominantly affects children and adolescents. However, the medical field lacks consensus regarding the optimal surgical approach to be undertaken in cases where this tumor causes local bone destruction in the upper limb. Case description: A 17-year-old male presented a mass in his left forearm and CT and MRI indicated that the mass had penetrated the ulnar cortex and infiltrating the medulla, resulting in the formation of an eccentric trans-ventricular tumor focus. The sizable tumor affected the volar muscles of the forearm as well as the ulnar bone marrow, exerting pressure on the ulnar artery and vein. It was confirmed by needle biopsy that the mass is alveolar rhabdomyosarcoma. Following two courses of neoadjuvant chemotherapy, the tumor was widely excised en bloc. Autologous fibula with a vascular pedicle was utilized for reconstruction during the procedure. In the postoperative follow-up, no local recurrence of the tumor was observed. Furthermore, the patient retained satisfactory wrist flexion and pronation function in the left forearm. Conclusions: Alveolar rhabdomyosarcoma is an uncommon and highly aggressive form of soft tissue sarcoma. Scientific management necessitates a multidisciplinary approach, combining chemotherapy with surgery. In cases where the tumor invaded into compartment of the bone, careful consideration should be given to the boundaries of tumor resection, the extent of osteotomy, and the approach to musculoskeletal reconstruction when designing the surgical plan. Through reporting our own case and thoroughly reviewing previous clinical experiences, we aim to provide valuable insights for the treatment of this particular disease.

Cross-Cultural Adaptation and Validation of the Romanian Musculoskeletal Tumor Society Scoring System for Patients with Extremity Bone Sarcomas.

Background and Objectives: Primary malignant bone tumors are rare lesions, and their complex treatment can lead to functional impairment. It is important to have a postoperative assessment tool for patients' functional outcomes to be evaluated and to consequently adapt future treatments in the pursuit of a continuous improvement of their quality of life. The Musculoskeletal Tumor Society Score (MSTS) is a validated specific system score that is used frequently in the follow-up of these patients. We found no information about a valid translated Romanian version of this score neither for the upper limb nor for the lower limb. We proposed in this study to translate the original version of the MSTS Score into Romanian and to perform validation analysis of the Romanian-language MSTS Score. Materials and Methods: We selected 48 patients who underwent limb-salvage surgery after resection of bone sarcomas. Patients were interrogated twice according to the translated Romanian version of the MSTS Score during their follow-up. The translation was performed according to the recommended guidelines. A total number of 96 questionnaires were valid for statistical analysis. Results: Internal consistency and reliability were good for both sets of questionnaires' analytic measurements, with Cronbach's alpha values of 0.848 (test) and 0.802 (retest). The test-retest evaluation proved to be statistically strong for reproducibility and validity with Spearman's rho = 0.9 (p < 0.01, 95% CI). Conclusions: This study permitted the translation of this score and the validation of psychometric data. Our results showed that the Romanian version of the MSTS is a reliable means of assessment of the functional outcome of patients who received limb-salvage surgery for the upper and lower extremities.

3D-printed porous tantalum artificial bone scaffolds: fabrication, properties, and applications.

Porous tantalum scaffolds offer a high degree of biocompatibility and have a low friction coefficient. In addition, their biomimetic porous structure and mechanical properties, which closely resemble human bone tissue, make them a popular area of research in the field of bone defect repair. With the rapid advancement of additive manufacturing, 3D-printed porous tantalum scaffolds have increasingly emerged in recent years, offering exceptional design flexibility, as well as facilitating the fabrication of intricate geometries and complex pore structures that similar to human anatomy. This review provides a comprehensive description of the techniques, procedures, and specific parameters involved in the 3D printing of porous tantalum scaffolds. Concurrently, the review provides a summary of the mechanical properties, osteogenesis and antibacterial properties of porous tantalum scaffolds. The use of surface modification techniques and the drug carriers can enhance the characteristics of porous tantalum scaffolds. Accordingly, the review discusses the application of these porous tantalum materials in clinical settings. Multiple studies have demonstrated that 3D-printed porous tantalum scaffolds exhibit exceptional corrosion resistance, biocompatibility, and osteogenic properties. As a result, they are considered highly suitable biomaterials for repairing bone defects. Despite the rapid development of 3D-printed porous tantalum scaffolds, they still encounter challenges and issues when used as bone defect implants in clinical applications. Ultimately, a concise overview of the primary challenges faced by 3D-printed porous tantalum scaffolds is offered, and corresponding insights to promote further exploration and advancement in this domain are presented.

An Elastin-Derived Composite Matrix for Enhanced Vascularized and Innervated Bone Tissue Reconstruction: From Material Development to Preclinical Evaluation.

Despite progress in bone tissue engineering, reconstruction of large bone defects remains an important clinical challenge. Here, a biomaterial designed to recruit bone cells, endothelial cells, and neuronal fibers within the same matrix is developed, enabling bone tissue regeneration. The bioactive matrix is based on modified elastin-like polypeptides (ELPs) grafted with laminin-derived adhesion peptides IKVAV and YIGSR, and the SNA15 peptide for retention of hydroxyapatite (HA) particles. The composite matrix shows suitable porosity, interconnectivity, biocompatibility for endothelial cells, and the ability to support neurites outgrowth by sensory neurons. Subcutaneous implantation leads to the formation of osteoid tissue, characterized by the presence of bone cells, vascular networks, and neuronal structures, while minimizing inflammation. Using a rat femoral condyle defect model, longitudinal micro-CT analysis is performed, which demonstrates a significant increase in the volume of mineralized tissue when using the ELP-based matrix compared to empty defects and a commercially available control (Collapat). Furthermore, visible blood vessel networks and nerve fibers are observed within the lesions after a period of two weeks. By incorporating multiple key components that support cell growth, mineralization, and tissue integration, this ELP-based composite matrix provides a holistic and versatile solution to enhance bone tissue regeneration.

Current application and future perspectives of antimicrobial degradable bone substitutes for chronic osteomyelitis.

Chronic osteomyelitis remains a persistent challenge for the surgeons due to its refractory nature. Generally, treatment involves extensive debridement of necrotic bone, filling of dead space, adequate antimicrobial therapy, bone reconstruction, and rehabilitation. However, the optimal choice of bone substitute to manage the bone defect remains debatable. This paper reviewed the clinical evidence for antimicrobial biodegradable bone substitutes in the treatment of osteomyelitis in recent years. Indeed, this combination was proved to eradicate infection and facilitate bone reconstruction, which might reduce the cost and hospital stay. Handling was associated with increased risk of unwanted side effect to affect bone healing. The study provides some valuable insights into the clinical evaluation of treatment outcomes in the aspects of infection eradication, bone reconstruction, and complications caused by materials. However, achieving complete infection eradication and subsequently perfect bone reconstruction remains challenging in compromised conditions, hence advanced innovative bone substitutes are imperative. In this review, we mainly focus on the desired functional effects of advanced bone substitutes on infection eradication and bone reconstruction from the future perspective. Handling property was optimized to simplify surgery process. It is expected that this review will provide an important opportunity to enhance the understanding of the design and application of innovative biomaterials to synergistically eradicate infection and restore integrity and function of bone.

Bone flap binding and transposition: a method for bone reconstruction in cranial burst fractures and early-stage growing skull fractures.

PURPOSE: To introduce a method of cranial bone reconstruction for cranial burst fractures and early-stage growing skull fractures, named bone flap binding and transposition. METHODS: Cranial burst fractures, severe head injuries predominantly observed in infants, are characterized by widely diastatic skull fractures coupled with acute extracranial cerebral herniation beneath an intact scalp through ruptured dura mater. These injuries can develop into growing skull fractures. This study included two cases to illustrate the procedure, with a particular focus on the bone steps in managing these conditions. The medical history, clinical presentation, surgical procedures, and postoperative follow-up were retrospectively studied. The details of the surgical procedure were described. RESULTS: The method of bone reconstruction, named bone flap binding and transposition, was applied after the lacerated dural repair. Two bone pieces were combined to eliminate the diastatic bone defect and then fixed by an absorbable cranial fixation clip and bound by sutures. The combined bone flap was repositioned into the bone window, completely covering the area of the original dural laceration. Subsequently, the bone defect was transferred to the area of normal dura. The postoperative courses for the two infants were uneventful. Follow-up CT scans revealed new bone formation at the previous bone defect and no progressive growing skull fracture. The major cranial defects had disappeared, leaving only small residual defects at the corners of the skull bone window, which required further recovery and did not affect the solidity of the skull. CONCLUSION: Bone flap binding and transposition provide a straightforward, cost-effective, and reliable method for cranial bone reconstruction of cranial burst fractures and early-stage growing skull fractures. This method has taken full advantage of the small infant's dura osteogenic potential without the need for artificial or metallic bone repair materials. The effectiveness of the method needs further validation with more cases in the future.

Induced-membrane technique for lower limb reconstruction after malignant bone tumour resection in paediatric patients: Complication and re-operation rates.

BACKGROUND: The objective of this study was to assess the complication and re-operation rates, evaluate the risk of non-union, and describe the functional outcomes at last follow-up in children and adolescents after lower-limb malignant tumour resection and reconstruction using the induced-membrane technique. HYPOTHESIS: Weight-bearing resumption 6 weeks after the second stage of the induced-membrane procedure promotes bone healing. MATERIAL AND METHODS: The study included 13 patients (9 with osteosarcoma, 3 with Ewing's sarcomas, and 1 with alveolar sarcoma) managed between 2000 and 2020 by oncological femoral or tibial resection followed, at a distance from adjuvant chemotherapy, by reconstruction using the induced-membrane technique. Non-union was the primary outcome measure and the MusculoSkeletal Tumor Society (MSTS) lower-limb functional score was the secondary outcome measure. Mean follow-up was 6.1 years (range, 2.0-12.7). At last follow-up, mean age was 18.1 years (range, 11.0-26.0) and the mean MSTS score was 66.6% (37.0-93.0%). RESULTS: After the second reconstruction stage, 8 complications developed in 6 patients (46%). Either a complication or limb-length inequality required 12 re-operations in 8 patients (61.5%). Non-union occurred after reconstruction in 5 (38.5%) patients. Early resumption of 50% weight-bearing 6 weeks after reconstruction was associated with bone healing (p=0.02). CONCLUSION: The non-union rate was 38.5%. Partial, 50% weight-bearing with two elbow crutches and an orthosis, if allowed by construct stability, may promote bone healing. LEVEL OF EVIDENCE: IV.

Use of Biomaterials in 3D Printing as a Solution to Microbial Infections in Arthroplasty and Osseous Reconstruction.

The incidence of microbial infections in orthopedic prosthetic surgeries is a perennial problem that increases morbidity and mortality, representing one of the major complications of such medical interventions. The emergence of novel technologies, especially 3D printing, represents a promising avenue of development for reducing the risk of such eventualities. There are already a host of biomaterials, suitable for 3D printing, that are being tested for antimicrobial properties when they are coated with bioactive compounds, such as antibiotics, or combined with hydrogels with antimicrobial and antioxidant properties, such as chitosan and metal nanoparticles, among others. The materials discussed in the context of this paper comprise beta-tricalcium phosphate (ß-TCP), biphasic calcium phosphate (BCP), hydroxyapatite, lithium disilicate glass, polyetheretherketone (PEEK), poly(propylene fumarate) (PPF), poly(trimethylene carbonate) (PTMC), and zirconia. While the recent research results are promising, further development is required to address the increasing antibiotic resistance exhibited by several common pathogens, the potential for fungal infections, and the potential toxicity of some metal nanoparticles. Other solutions, like the incorporation of phytochemicals, should also be explored. Incorporating artificial intelligence (AI) in the development of certain orthopedic implants and the potential use of AI against bacterial infections might represent viable solutions to these problems. Finally, there are some legal considerations associated with the use of biomaterials and the widespread use of 3D printing, which must be taken into account.

Reconstruction of the elbow with distal humerus endoprosthetic replacement after tumor resection: a systematic review of the literature and institutional case series.

BACKGROUND: Distal humerus replacement (DHR) is a modular endoprosthesis mainly used for bone reconstruction after resection of primary or metastatic bone lesions. Studies on DHR failure rates and postoperative functional outcomes are scarce. We sought to assess implant survival, modes of failure, and functional outcomes in patients undergoing DHR for oncologic indications. METHODS: A systematic review of the PubMed and Embase databases was performed. PRISMA guidelines were followed for this manuscript. Our study was registered on PROSPERO (457,260). Quality appraisal of included studies was conducted using the STROBE checklist. Prosthetic failure was assessed using the Henderson classification for megaprosthetic failures. We additionally performed a retrospective review of patients treated with a DHR for oncologic indications at a large tertiary care academic center. Weighted means were calculated to pool data. RESULTS: Eleven studies with a total of 162 patients met the inclusion criteria. Mean follow-up was 3.7 years (range, 1.66-8 years). Henderson type 2 failures (aseptic loosening) were the most common mode of failure, occurring in 12% of cases (range, 0%-33%). Five-year implant survival was 72% (range, 49%-93.7%). Mean postoperative Musculoskeletal Tumor Society (MSTS) score was 81.1 (range, 74-84.3). In our institutional case series, 2 out of 5 patients had DHR revision for periprosthetic fracture and aseptic loosening at 16 and 27 months after surgery, respectively. CONCLUSIONS: Distal humerus replacement is a successful reconstruction strategy for tumors of the distal humerus, with high implant survival and good to excellent functional outcomes.

3D bioprinting technology to construct bone reconstruction research model and its feasibility evaluation.

Objective: To explore and construct a 3D bone remodeling research model displaying stability, repeatability, and precise simulation of the physiological and biochemical environment in vivo. Methods: In this study, 3D bioprinting was used to construct a bone reconstruction model. Sodium alginate (SA), hydroxyapatite (HA) and gelatin (Gel) were mixed into hydrogel as scaffold material. The osteoblast precursor cells MC3T3-E1 and osteoclast precursor cells RAW264.7 were used as seed cells, which may or may not be separated by polycarbonate membrane. The cytokines osteoprotegerin (OPG) and receptor activator of NF-κB ligand (RANKL) were used to induce cell differentiation. The function of scaffolds in the process of bone remodeling was analyzed by detecting the related markers of osteoblasts (alkaline phosphatase, ALP) and osteoclasts (tartrate resistant acid phosphatase, TRAP). Results: The scaffold showed good biocompatibility and low toxicity. The surface morphology aided cell adhesion and growth. The scaffold had optimum degradability, water absorption capacity and porosity, which are in line with the conditions of biological experiments. The effect of induced differentiation of cells was the best when cultured alone. After direct contact between the two types of cells at 2D or 3D level, the induced differentiation of cells was inhibited to varying degrees, although they still showed osteogenesis and osteoclast. After the cells were induced by indirect contact culture, the effect of induced differentiation improved when compared with direct contact culture, although it was still not as good as that of single culture. On the whole, the effect of inducing differentiation at 3D level was the same as that at 2D level, and its relative gene expression and enzyme activity were higher than that in the control group. Hence the scaffold used in this study could induce osteogenesis as well as osteoclast, thereby rendering it more effective in inducing new bone formation. Conclusion: This method can be used to construct the model of 3D bone remodeling mechanism.

Nicotinamide mononucleotide based hyaluronic acid methacryloyl hybrid hydrogel regulating stem cells fate for bone regeneration via SIRT1/RUNX2 signaling.

Efficient bone reconstruction, especially of the critical size after bone damage, remains a challenge in the clinic. Bone marrow mesenchymal stem cell (BMSC) osteogenic differentiation is considered as a promising strategy for bone repair. Nicotinamide adenine dinucleotide (NAD+) regulating BMSC fate and cellular function enhance osteogenesis, but is hardly delivered and lack of targeting. Herein, a novel and biocompatible scaffold was fabricated to locally deliver a precursor of NAD+, nicotinamide mononucleotide (NMN) to the bone defect site, and its bone repair capability and healing mechanism were clarified. NMN-based hyaluronic acid methacryloyl hybrid hydrogel scaffold (denoted as NMN/HAMA) was prepared via photopolymerization. In vitro RT-qPCR analysis, western blotting, Elisa and alizarin red S staining assays demonstrated that the NMN/HAMA hybrid hydrogel regulated BMSCs cellular function in favour of osteogenic differentiation and mineralization by upregulating the mRNA and proteins expression of the osteogenic genes type I pro-collagen (Col-1), bone morphogenic protein 4 (BMP4), and runt-related transcription factor 2 (RUNX2) via the SIRT1 pathway. Implantation of such hybrid hydrogels significantly enhanced bone regeneration in rodent critical calvarial defect models. Furthermore, restoration of the bone defect with NMN administration was inhibited in Prx1 Cre+; SIRT1flox/flox mice, confirming that the NMN/HAMA hybrid hydrogel scaffold promoted bone regeneration via the SIRT1-RUNX2 pathway. These results imply that NMN-based scaffold may be a promising and economic strategy for the treatment of bone defects.

Reconstruction of an Extensive Segmental Radial Shaft Bone Defect by Vascularized 3D-Printed Graft Cage.

We report here a 46-year-old male patient with a 14 cm segmental bone defect of the radial shaft after third degree open infected fracture caused by a shrapnel injury. The patient underwent fixed-angle plate osteosynthesis and bone reconstruction of the radial shaft by a vascularized 3D-printed graft cage, including plastic coverage with a latissimus dorsi flap and an additional central vascular pedicle. Bony reconstruction of segmental defects still represents a major challenge in musculo-skeletal surgery. Thereby, 3D-printed scaffolds or graft cages display a new treatment option for bone restoration. As missing vascularization sets the limits for the treatment of large-volume bone defects by 3D-printed scaffolds, in the present case, we firstly describe the reconstruction of an extensive radial shaft bone defect by using a graft cage with additional vascularization.

BMP-2-immobilized PCL 3D printing scaffold with a leaf-stacked structure as a physically and biologically activated bone graft.

Although three-dimensional (3D) printing techniques are used to mimic macro- and micro-structures as well as multi-structural human tissues in tissue engineering, efficient target tissue regeneration requires bioactive 3D printing scaffolds. In this study, we developed a bone morphogenetic protein-2 (BMP-2)-immobilized polycaprolactone (PCL) 3D printing scaffold with leaf-stacked structure (LSS) (3D-PLSS-BMP) as a bioactive patient-tailored bone graft. The unique LSS was introduced on the strand surface of the scaffold via heating/cooling in tetraglycol without significant deterioration in physical properties. The BMP-2 adsorbed on3D-PLSS-BMPwas continuously released from LSS over a period of 32 d. The LSS can be a microtopographical cue for improved focal cell adhesion, proliferation, and osteogenic differentiation.In vitrocell culture andin vivoanimal studies demonstrated the biological (bioactive BMP-2) and physical (microrough structure) mechanisms of3D-PLSS-BMPfor accelerated bone regeneration. Thus, bioactive molecule-immobilized 3D printing scaffold with LSS represents a promising physically and biologically activated bone graft as well as an advanced tool for widespread application in clinical and research fields.

Virtual registration of comminuted bone fracture and preoperative assessment of reconstructed bone model using the Procrustes algorithm based on CT dataset.

A research work was undergone in a virtual bone reduction process for reconstruction of the comminuted pelvic bone fracture using a CT scan dataset of patients. This includes segmentation, 3D model optimization and bone registration technique. The accuracy of the reconstructed bone model was validated using Finite Element Method. Analysed and applied various segmentation techniques to segregate the injured bone structure. The ICP (Iterative Closest Point), Procrustes algorithm and Canny edge detection algorithm were applied to understand the bone registration process for surgery in detail. The average RMS error, mean absolute distance, mean absolute deviation, and mean signed distance of the reconstructed bone model using proposed algorithms involving 10 patient datasets in a group were found to be 1.77, 1.48, 1.51 and -0.31 mm respectively. The calculated RMS error value proved minimal error in semi-automatic registration than other existing automatic registration techniques. Therefore, the proposed approach is suitable for virtual bone reduction for comminuted pelvic bone fracture. This method could also be implemented for various other bone fracture reconstruction requirements.

Bipolar Head Perforation With Rhabdomyosarcoma of the Thigh: A Case Report With Literature Review.

Background/Aim: High complication rates during the perioperative management of sarcomas around the pelvis have been reported; however, few include the detailed clinical course or complications in the late postoperative period. Radiotherapy is a multidisciplinary strategy for treating sarcomas. However, irradiated bone and soft tissues show a permanent loss of repair and immunocompetence. We present a case of pleomorphic rhabdomyosarcoma of the thigh that resulted in acetabular collapse induced by radiation and intestinal perforation during long-term follow-up. Additionally, we discuss the risk factors for late complications and pelvic reconstruction methods. Case Report: A 75-year-old man presented with a 1-month history of a recurring fever. Ten years prior, he was diagnosed with pleomorphic rhabdomyosarcoma of the right thigh and underwent a wide resection and bipolar hip arthroplasty, followed by chemotherapy and radiotherapy. Radiographs showed central dislocation of the bipolar head. Computed tomography revealed free air in the hip joint and thickening of the colon wall. Colonoscopy revealed displacement of the bipolar head into the colon wall. Colon resection and hip disarticulation were performed, as the bipolar head was contaminated with intestinal contents. Currently, he is able to walk stably with a walker, and there is no evidence of recurrence or metastasis of the tumor. Conclusion: Irradiation of the periacetabular bone may induce resorptive destruction, resulting in future structural failure. Hardware should not be used for periacetabular bone reconstruction; the risk of pelvic organ damage should be considered when the acetabular collapse becomes deteriorated. Therefore, other reliable and permanent reconstruction options are required.