Effect of neutral position magnetic resonance imaging on cervical discs herniation volume and cervical curvature / 中国组织工程研究

BACKGROUND:Cervical neutral position magnetic resonance imaging is widely used for the diagnosis and treatment of cervical spondylotic myelopathy.However,it is not possible for patients to maintain the exact same position of the head and neck during repeated cervical magnetic resonance imaging examinations.The cervical spine undergoes minor flexion and extension movements in the sagittal plane,and the head may have a certain degree of variation in flexion and extension.Whether these changes in the neutral position of the cervical spine affect the volume of cervical discs herniation and cervical curvature is unclear. OBJECTIVE:Using artificial intelligence-assisted measurement,this study aimed to analyze the accuracy and reliability of magnetic resonance imaging examinations for measuring the volume of cervical discs herniation and cervical curvature in patients with cervical spondylotic myelopathy undergoing two consecutive cervical neutral positions in the short term. METHODS:A retrospective study was conducted on patients with cervical spondylotic myelopathy who underwent conservative treatment and underwent two consecutive cervical magnetic resonance imaging examinations within three months between June 2012 and June 2023.We proposed the use of occipital-thoracic distance and occipital-thoracic angle to evaluate the variation in flexion and extension of the head in the neutral position of the cervical spine.Based on the changes in occipital-thoracic angle,patients were divided into occipital-thoracic angle increase group and occipital-thoracic angle decrease group.Cervical discs herniation volume,C2-6 Cobb angle,and cervical(C3-C7)curvature were measured using artificial intelligence-assisted measurement software.Normal distribution data were represented by mean±SD,while non-normal distribution data were represented by the median(interquartile range).Spearman's rank correlation coefficient was used to analyze the correlation between changes in Cobb angle,cervical(C3-C7)curvature,and cervical discs herniation volume. RESULTS AND CONCLUSION:(1)A total of 104 patients and 326 cervical discs herniation were included in the study.There were 47 patients in the occipital-thoracic angle increase group and 57 patients in the occipital-thoracic angle decrease group.(2)Extension and flexion index of the head:There were no significant differences in occipital-thoracic distance and occipital-thoracic angle during the initial diagnosis and follow-up examination.The variation of occipital-thoracic distance was 0.035(3.23)mm,and the variation of occipital-thoracic angle was-0.31(3.28)°.The deviation range of occipital-thoracic distance and occipital-thoracic angle was small,and there was no significant correlation.(3)Cervical curvature index:There were no significant differences in C2-6 Cobb angle and C3-C7 curvature during the initial diagnosis and follow-up examination.There were no significant differences in C2-6 Cobb angle and C3-C7 curvature between the occipital-thoracic angle increase group and occipital-thoracic angle decrease group.(4)There was no significant difference in volume of cervical discs herniation during the initial diagnosis and follow-up examination.There was no significant difference in volume of cervical discs herniation between the occipital-thoracic angle increase group and occipital-thoracic angle decrease group.There was no significant correlation between the change of cervical discs herniation volume and the change of C2-6 Cobb angle and the cervical(C3-C7)curvature.(5)These results indicate that in the neutral position of the cervical spine,there were negligible minor flexion and extension movements in the sagittal plane,and the head was limited to a specific position.Although the head has a certain range of flexion and extension variation,it does not affect the accuracy and reliability of parameters including cervical discs herniation volume,C2-6 Cobb angle,and cervical(C3-C7)curvature.

The effects of modified Guizhi plus Gegen decoction combined with the blade needle therapy on TCM syndromes, cervical curvature and levels of inflammatory factors in patients with cervical spondylotic radiculopathy.

OBJECTIVE: To explore the effect of modified Guizhi plus Gegen decoction combined with the blade needle therapy on traditional Chinese medicine (TCM) syndromes, cervical curvature, and inflammatory factor levels in patients with cervical spondylotic radiculopathy. METHODS: In this retrospective study, 114 patients with cervical spondylotic radiculopathy who visited Pain Clinic, Hangzhou Fuyang Hospital of TCM Orthopedics and Traumatology from January 2020 to December 2022 were selected as the study subjects. According to different treatment methods, these patients were divided into an observation group (n=57, treated with blade needle therapy) and a control group (n=57, treated with modified Guizhi plus Gegen decoction combined with the blade needle therapy). Patients in both groups were treated for 3 courses. The treatment effects, TCM syndrome scores, cervical curvature, hemorheology indexes, inflammatory factors and adverse reactions were analyzed and compared between the two groups. RESULTS: The effective rate of patients in the observation group was 94.74%, which was significantly higher than 82.46% in the control group (P<0.05). After treatment, TCM syndrome scores, hemorheology indexes, and inflammatory factors levels in both of groups were significantly decreased in contrast to before treatment, while the cervical curvature was obviously increased. Compared with the control group, after the treatment, TCM syndrome scores, hemorheology indexes, inflammatory factors levels after treatment in the observation group were obviously lower, while the cervical curvature in the observation group being significantly increased (all P<0.05). No statistical differences were found for the incidence of adverse reactions between two the groups. CONCLUSION: Modified Guizhi plus Gegen decoction combined with the blade needle therapy effectively improved the TCM syndrome scores, restored the curvature of the cervical spine, improved the hemorheology of patients, inhibited the levels of inflammatory factors and it also has few adverse reactions, with a significant treatment effect in patients with cervical spondylotic radiculopathy.

How cervical curvature changes after ACAF and ACDF: a radiological retrospective study.

To assess changes in cervical curvature and demonstrate the feasibility of using ACAF technology to restore lordosis, imaging data from patients undergoing multilevel ACAF and ACDF surgeries were retrospectively analyzed. Forty-seven patients receiving multilevel ACAF and ACDF were included in the study. Total cervical curvature and anterior, middle, and posterior column curvature, spinal canal diameter, cervical range of motion, and surgical complications were measured and analyzed by non-parametric or chi-square tests before and after surgery. The Spearman correlation between imaging data was analyzed. Compared with ACDF, the operation time of the ACAF group was longer, the cervical motion was larger, the median and change value of the middle column curvature was larger, and the change value of the posterior column curvature was smaller (P < 0.05). The postoperative differences in cervical lordosis angle, vertebral canal diameter, and middle and posterior column curvature in the ACAF group were significantly greater than those in the ACDF group (p = 0.015). The expansion of vertebral canal diameter was significantly correlated with the difference in curvature between the middle and posterior columns (r = 0.523, P < 0.01), and the curvature of the anterior column was correlated with that of the middle and posterior columns (P < 0.05). The curvature change of the anterior column is closely related to the curvature change of the middle column and the posterior column. Compared with ACDF, ACAF expands the diameter and volume of the spinal canal by increasing the curvature of the middle column and reducing the anterior movement of the posterior column.

Factors affecting titanium mesh cage subsidence in single-level anterior cervical corpectomy and fusion for ossification of the posterior longitudinal ligament.

PURPOSE: To analyze risk factors of titanium mesh cage (TMC) subsidence in single-level anterior cervical corpectomy and fusion (ACCF) for cervical ossification of the posterior longitudinal ligament (OPLL). METHODS: TMC subsidence is defined as the reduction of the adjacent vertebral bodies by ≥ 2 mm. Patients with cervical OPLL who were treated with single-level ACCF between January 2019 and May 2021 were retrospectively analyzed in two groups: patients with TMC subsidence as Group S and patients with no TMC subsidence as Group N during the one-year follow-up period. The degree of distraction of surgical segment and correction of the cervical curvature was measured to analyze their relationship with TMC subsidence. RESULTS: A total of 128 patients were included in Group S, and 138 patients were included in Group N. There was no significant difference in patient demographics and complications between the two groups. The degree of distraction in Group S was significantly higher than that in Group N (11.4% ± 7.6% vs. 4.7% ± 9.7%, P < 0.01). The change of C2 to C7 Cobb angle (α) in Group S was significantly greater than that in Group N (5.7 ± 2.7 vs. 1.4 ± 4.7, P < 0.01), and the change of interspinous process distance (SPD) in Group S was also significantly greater than that in Group N (7.0 ± 4.2 vs. 4.1 ± 2.7, P < 0.01). The JOA score and JOA recovery rate were not statistically different between the two groups. CONCLUSIONS: Intraoperative selection of overlength TMC in single-level ACCF for OPLL, over-distraction and excessive correction of the cervical curvature may cause TMC subsidence after surgery. No significant impact of TMC subsidence on the surgical outcome was observed during the 1-year follow-up period.

Is the Zero-P Spacer Suitable for 3-Level Anterior Cervical Discectomy and Fusion Surgery in Terms of Sagittal Alignment Reconstruction: A Comparison Study with Traditional Plate and Cage System.

The Zero-P spacer was primarily developed aiming to reduce the morbidity associated with the traditional anterior cervical plate. During the past decade, many authors have reported the use of Zero-P spacers for anterior cervical discectomy and fusion (ACDF) of one or two segments. Nevertheless, there is still a paucity of knowledge on the safety and feasibility of using Zero-P spacers for 3-level fixation. The objective of this study was to investigate the clinical and radiological outcomes, with a focus on the sagittal alignment reconstruction of 3-level ACDF surgery using Zero-P spacers versus those using a traditional plate and cage system. From Sep 2013 to Aug 2016, a total of 44 patients who received 3-level ACDF surgery due to cervical spondylotic myelopathy were recruited. The Zero-P spacer was used in 23 patients (group ZP) and the traditional plate and cage system in 21 (group PC). Clinical outcomes were analyzed by Neck Disability Index (NDI) and Japanese Orthopedic Association (JOA) scores, and dysphagia was evaluated using the Bazaz score. Radiological outcomes, including fusion rate, adjacent segment degeneration (ASD), and especially changes in cervical sagittal alignment, were analyzed. The NDI and JOA scores did not differ significantly between the two groups postoperatively (p > 0.05); however, there was significantly less dysphagia in patients using Zero-P spacers at the 3- and 6-month follow-up (p < 0.05). At the 24-month follow-up, the fusion rate and ASD were similar between the two groups (p > 0.05). Interestingly, patients using Zero-P spacers had a significantly lower postoperative C2-7 Cobb angle and fused segment Cobb angle, compared to those using a traditional plate and cage system (p < 0.05); meanwhile, the fused segment disc wedge was also found to be significantly smaller in patients using Zero-P spacers after surgery (p < 0.05). Moreover, we further divided patients into subgroups according to their cervical lordosis. In patients with a preoperative C2-7 Cobb angle ≤ 10°, significantly less cervical and local lordosis, as well as disc wedge, were seen in group ZP after surgery (p < 0.05), while in others with a preoperative C2-7 Cobb angle > 10°, no significant difference in postoperative changes of the cervical sagittal alignment was seen between group ZP and group PC (p > 0.05). Zero-P spacers used in 3-level ACDF surgery could provide equivalent clinical outcomes and a lower rate of postoperative dysphagia, compared to the traditional plate and cage system. However, our results showed that it was inferior to the cervical plate in terms of sagittal alignment reconstruction for 3-level fixation. We recommend applying Zero-P spacers for 3-level ACDF in patients with good preoperative cervical lordosis (C2-7 Cobb angle > 10°), in order to restore and maintain physiological curvature of the cervical spine postoperatively.

Cervical Alignment of Patients with Basilar Invagination: A Radiological Study.

OBJECTIVE: To investigate the cervical alignment and the relative range of motion (ROM) in patients with basilar invagination (BI). METHODS: A total of 40 BI cases (38.1 years old ± 17.9 years old, 19 male and 21 female) and 80 asymptomatic individuals (33.8 years old ± 10.8 years old, 40 male and 40 female) were included. The Skull-C2 /Skull-BV, Skull-C7 , C2 -C7 /BV-C7 wall angles, C0 -C2 /C0 -BV, C0 -C7 , C1 -C7 , and C2 -C7 /BV-C7 angles were measured in dynamic X-ray images (including neutral, extension, and flexion positions). Correlation between the upper and lower cervical curvatures were analyzed. The total, extension, and flexion ROMs of these angles were calculated, respectively. RESULTS: The BI patients had a smaller C0 -C2 /C0 -BV angle (18.2° ± 16.4° vs 30.9° ± 9.3°), but larger C2 -C7 /BV-C7 (32.2° ± 16.1° vs 19.4° ± 10.6°) and C2 -C7 /BV-C7 wall angles (37.8° ± 17.2° vs 23.6° ± 10.2°) than the control group in neutral position. The upper and lower curvatures correlated negatively in neutral (r = -0.371), extension (r = -0.429), and flexion (r = -0.648) positions among BI patients, as well as in extension position (r = -0.317) among control group. The BI patients presented smaller total ROMs in Skull-C2 /Skull-BV (12.3° ± 16.6° vs 19.7° ± 10.9°), C0 -C2 /C0 -BV (8.1° ± 11.1° vs 17.6° ± 10.5°), and C0 -C7 angles (57.8° ± 14.2° vs 78.3° ± 17.9°), but a larger total ROM in C2 -C7 /BV-C7 wall angle (52.8° ± 13.9° vs 27.0° ± 16.1°) than the control group. The BI patients also presented smaller extension ROMs in Skull-C2 /Skull-BV (6.9° ± 9.4° vs 12.5° ± 9.3°), Skull-C7 (24.5° ± 10.9° vs 30.7° ± 12.5°), and C0 -C2 /C0 -BV angles (4.4° ± 7.8° vs 9.9° ± 8.6°) than the control group. Moreover, the BI patients showed smaller absolute values of flexion ROMs in Skull-C2 /Skull-BV (-5.2° ± 9.4° vs -7.3° ± 8.0°), C0 -C2 /C0 -BV (-3.2° ± 8.8° vs -7.7° ± 8.7°), and C0 -C7 angles (-33.2° ± 13.0° vs -52.8° ± 19.2°), but a larger absolute value of flexion ROM in C2 -C7 /BV-C7 wall angle (-33.9° ± 14.8° vs -8.2° ± 15.1°). CONCLUSION: The cervical spine was stiffer in BI patients than the asymptomatic individuals, especially in the upper cervical curvature. The negative correlation between upper and lower cervical curvatures was more obvious in BI patients.

[Correlative analysis of cervical curvature and atlantoaxial instability].

OBJECTIVE: To investigate the correlation between the changes of cervical curvature and atlantoaxial instability. METHODS: The correlation between the changes of cervical curvature and atlantoaxial instability was retrospectively studied in 50 outpatients with abnormal cervical curvature (abnormal cervical curvature group) from January 2018 to December 2019. There were 24 males and 26 females in abnormal cervical curvature group, aged from 18 to 42 years old with an average of(30.62±5.83) years. And 53 patients with normal cervical curvature (normal cervical curvature group) during the same period were matched, including 23 males and 30 females, aged from 21 to 44 years with an average of(31.98±6.11) years. Cervical spine X-ray films of 103 patients were taken in lateral position and open mouth position. Cervical curvature and variance of bilateral lateral atlanto-dental space(VBLADS) were measured and recorded, Pearson correlation coefficient analysis was used to study the correlation between the changes of cervical curvature and atlantoaxial instability. RESULTS: Atlantoaxial joint instability accounted for 39.6%(21/53) in normal cervical curvature group and 84.0%(42/50) in abnormal cervical curvature group. There was significant difference between two groups(P<0.01). VBLADS in abnormal cervical curvature group was (1.79±1.01) mm, which was significantly higher than that in normal cervical curvature group(0.55±0.75) mm(P<0.01). Pearson correlation coefficient analysis showed that the size of cervical curvature was negatively correlated with VBLADS. CONCLUSION: Cervical curvature straightening and inverse arch are the cause of atlantoaxial instability, the smaller the cervical curvature, the more serious the atlantoaxial instability.

K-line in patients with cervical ossification of the posterior longitudinal ligament: relationship with change in sagittal cervical curvature and laminoplasty outcomes.

INTRODUCTION: To analyze how K-line is related to change in sagittal cervical curvature and laminoplasty outcomes in patients with cervical ossification of the posterior longitudinal ligament (OPLL). MATERIALS AND METHODS: The study retrospectively analyzed 81 patients with OPLL who had undergone posterior cervical single-door laminoplasty and arch plate fixation between June 2011 and June 2017. Fifty-five were K-line positive (K[+]) and 26 were K-line negative (K[-]). Clinical and radiological results were compared between the groups. Patients were followed up for at least 2 years. RESULTS: Before the operation, Japanese Orthopedic Association (JOA) score, visual analogue scale (VAS) score, neck disability index (NDI), and short-form-36 (SF-36) quality of life score did not differ significantly between the groups. Neurological function was improved in both groups after the procedure. At last follow-up, JOA score, VAS score, NDI, SF-36 score, and JOA score improvement rate differed significantly between the groups. Before the operation, at the 3-month and final follow-ups, C2-7 Cobb angle, T1 slope, and C2-7 SVA differed significantly between the groups. The changes were more marked in the K(-) group than in the K(+) group. The incidence of cervical kyphosis differed significantly between the groups (P < 0.05), as well as between patients with lordosis < 7° and those with lordosis ≥ 7°. CONCLUSIONS: K-line negativity and lordosis < 7° may predict kyphosis after laminoplasty in patients with OPLL. The cervical curvature in patients with OPLL tends towards kyphosis and anteversion after laminoplasty, which contributes to the reduced clinical effect of the procedure.

Correlative analysis of cervical curvature and atlantoaxial instability / 中国骨伤

OBJECTIVE@#To investigate the correlation between the changes of cervical curvature and atlantoaxial instability.@*METHODS@#The correlation between the changes of cervical curvature and atlantoaxial instability was retrospectively studied in 50 outpatients with abnormal cervical curvature (abnormal cervical curvature group) from January 2018 to December 2019. There were 24 males and 26 females in abnormal cervical curvature group, aged from 18 to 42 years old with an average of(30.62±5.83) years. And 53 patients with normal cervical curvature (normal cervical curvature group) during the same period were matched, including 23 males and 30 females, aged from 21 to 44 years with an average of(31.98±6.11) years. Cervical spine X-ray films of 103 patients were taken in lateral position and open mouth position. Cervical curvature and variance of bilateral lateral atlanto-dental space(VBLADS) were measured and recorded, Pearson correlation coefficient analysis was used to study the correlation between the changes of cervical curvature and atlantoaxial instability.@*RESULTS@#Atlantoaxial joint instability accounted for 39.6%(21/53) in normal cervical curvature group and 84.0%(42/50) in abnormal cervical curvature group. There was significant difference between two groups(P<0.01). VBLADS in abnormal cervical curvature group was (1.79±1.01) mm, which was significantly higher than that in normal cervical curvature group(0.55±0.75) mm(P<0.01). Pearson correlation coefficient analysis showed that the size of cervical curvature was negatively correlated with VBLADS.@*CONCLUSION@#Cervical curvature straightening and inverse arch are the cause of atlantoaxial instability, the smaller the cervical curvature, the more serious the atlantoaxial instability.

[Relationship between O-EA angle and lower cervical curvature in patients with anterior atlantoaxial dislocation before and after occipitocervical fusion].

OBJECTIVE: To investigate the relationship between O-EA angle and lower cervical curvature in patients with anterior atlantoaxial dislocation undergoing occipitocervical fusion, and to analyze the effect of O-EA angle on lower cervical curvature. METHODS: The clinical data of 61 patients with anterior atlantoaxial dislocation undergoing occipitocervical fusion who were admitted between April 2010 and July 2018 and met the selection criteria were retrospectively analyzed. There were 32 males and 29 females, with an age of 14-76 years (mean, 50.7 years). The fixed segment included 19 cases of C 0-C 2, 27 cases of C 0-C 3, 14 cases of C 0-C 4, and 1 case of C 0-C 5. The O-EA angle, C 2-7 Cobb angle, and T 1 tilt angle were measured before operation and at last follow-up. According to the O-EA angle measured at last follow-up, the patients were divided into <95° group (group A), 95°-105° group (group B), and >105° group (group C), and compared the differences of gender, age, fixed segment (short segment was at C 3 and above, long segment was beyond C 3), and C 2-7 Cobb angle. Correlation analysis between the O-EA angle and C 2-7 Cobb angle before operation and at last follow-up, as well as the changes of O-EA angle and C 2-7 Cobb angle between before operation and at last follow-up were analyzed. RESULTS: All 61 patients were followed up 12-24 months, with an average of 22.4 months. There was no significant difference in O-EA angle, C 2-7 Cobb angle, and T 1 tilt angle before operation and at last follow-up ( P>0.05). According to the last follow-up O-EA angle grouping, there were 14 cases in group A, 29 cases in group B, and 18 cases in group C. There was no significant difference in age, gender composition, and fixed segment composition among the three groups ( P>0.05); the differences in C 2-7 Cobb angles among the three groups were significant ( P<0.05), groups A, B, and C showed a gradually increasing trend. The O-EA angle was positively correlated with C 2-7 Cobb angle before operation and at last follow-up ( r=0.572, P=0.000; r=0.618, P=0.000); O-EA angle change at last follow-up was also positively correlated with C 2-7 Cobb change ( r=0.446, P=0.000). CONCLUSION: The O-EA angle of patients with anterior atlantoaxial dislocation is positively correlated with C 2-7 Cobb angle. Too large O-EA angle should be avoided during occipitocervical fixation, otherwise it may accelerate the degeneration of the lower cervical spine.

[Correlation between cervical curvature and cervical disc bulging in young patients with neck pain].

OBJECTIVE: To explore the correlation between the curvature of the cervical spine and the degree of cervical disc bulging in young patients with cervical pain. METHODS: The clinical data of 539 young patients with neck pain from January 2015 to December 2018 were retrospectively analyzed. There were 251 males and 288 females, aged 18 to 40 (32.2±6.3) years old. The cervical curvature and cervical disc bulging were measured by cervical X-ray and MRI. According to cervical curvature, the patients were divided into 175 cases of cervical lordosis group (cervical curvature > 7 mm), 163 cases of cervical erection group (0

Correlation between cervical curvature and cervical disc bulging in young patients with neck pain / 中国骨伤

OBJECTIVE@#To explore the correlation between the curvature of the cervical spine and the degree of cervical disc bulging in young patients with cervical pain.@*METHODS@#The clinical data of 539 young patients with neck pain from January 2015 to December 2018 were retrospectively analyzed. There were 251 males and 288 females, aged 18 to 40 (32.2±6.3) years old. The cervical curvature and cervical disc bulging were measured by cervical X-ray and MRI. According to cervical curvature, the patients were divided into 175 cases of cervical lordosis group (cervical curvature > 7 mm), 163 cases of cervical erection group (0

C3 laminectomy combined with modified unilateral laminoplasty and in situ reconstruction of the midline structures maintained cervical sagittal balance: a retrospective matched-pair case-control study.

BACKGROUND CONTEXT: Open-door laminoplasty often results in postoperative complications such as loss of cervical lordosis, limitations of cervical motion, and axial symptoms. However, current modified laminoplasty techniques such as muscle-sparing type or spinous process splitting technique are not as effective as expected. PURPOSE: To evaluate the radiological and clinical outcomes of C3 laminectomy combined with modified unilateral laminoplasty (preservation of posterior muscle-ligament complex and reconstruction of the midline structures) versus traditional open door laminoplasty in treating cervical spondylotic myelopathy or ossification of the posterior longitudinal ligament. STUDY DESIGN: Retrospective case-control study. PATIENT SAMPLE: One hundred and eleven patients with multilevel cord compression and myelopathic symptoms. OUTCOME MEASURES: The outcome parameters were operation time, blood loss volume, complications, osseous fusion status, C0-C2 and C2-C7 Cobb angles, T1 slope, cervical sagittal vertical axis (cSVA), cervical curvature index (CCI), range of motion (ROM), cross-sectional area (CSA) of the semispinalis cervicis, axial symptoms, visual analog scale (VAS) score, Japanese Orthopedic Association (JOA) score, and neck disability index (NDI). METHODS: We matched 37 patients who underwent modified laminoplasty with 74 patients treated by traditional open door laminoplasty (ratio, 1:2) according to age, sex, body mass index, compromised level, and radiographic characteristics. Preoperative and postoperative cervical parameters, namely, the C2-C7 Cobb angle, ROM, and CCI were measured on X-ray films. The CSA of the semispinalis cervicis was assessed on magnetic resonance images, and osseous fusion status of the hinge side and the osteotomy site was evaluated by computed tomography. We used the JOA and VAS scores, and the NDI to evaluate clinical outcomes. RESULTS: The average follow-up period in the modified group was 24.1 months (range, 18-37 months) compared with 24.7 months (range, 18-38 months) in the control group. At the final follow-up, C0-C2 Cobb angle, T1 slope, and cSVA increased in the control group and were unchanged in the modified group. The C2-C7 Cobb angle decreased significantly in the control group and did not change in the modified group. ROM and CCI loss rate did not change in the modified group but decreased significantly in the control group. The CSA loss in the semispinalis cervicis was 222.90±79.56 mm2 in the control group and 49.11±75.93 mm2 in the modified group, with a significant difference (p<.001). The final CSA of the semispinalis cervicis at C2 and C4-C7 levels showed no significant difference in the modified group and decreased significantly in the control group compared with preoperation. Changes in the C2-C7 Cobb angle and cSVA were both correlated with the CSA loss of the semispinalis cervicis (r=0.282, p=.003; r=0.267, p=.005, respectively). Moreover, the CSA loss of the semispinalis cervicis also correlated with the CCI loss rate and the changes in ROM (r=0.312, p=.001; r=0.287, p=.002, respectively). Clinical outcomes such as VAS and NDI scores, improved significantly more in the modified group versus the controls (p<.001 and p=.005, respectively), while JOA scores improved similarly in both groups (p=.132). The incidence of axial symptoms was significantly lower in the modified group versus controls (5.4% vs 9.5%, respectively; p=.023). CONCLUSIONS: C3 laminectomy combined with modified unilateral laminoplasty is effective for treating patients with multilevel cord compression. This modified technique reconstructs the midline structures and may lead to improved alignment and less axial pain.

[Effect of zero-profile and self-locking intervertebral cage and plate-cage construct on maintenance of cervical curvature after anterior cervical surgery].

OBJECTIVE: To compare differences in the maintenance of cervical curvature after anterior cervical surgery between zero-profile and self-locking intervertebral cage and plate-cage construct (PCC). METHODS: A clinical data of 100 patients with single-segment cervical disc herniation who were treated with anterior cervical discectomy and fusion were retrospectively analyzed between January 2015 and January 2016. Among them, 50 patients were treated with the zero-profile and self-locking intervertebral cage (group A) and 50 patients with the PCC (group B). There was no significant difference between the two groups in age, gender, bone mineral density, disease duration, operative segment, and preoperative visual analogue scale (VAS) score, Japanese Orthopaedic Association (JOA) score, C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height ( P>0.05). The operation time and intraoperative blood loss were recorded. The postoperative VAS and JOA scores were used to evaluate the clinical efficacy. The C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height were measured on lateral X-ray films, and the interbody fusion was evaluated according to Pitzen's criteria. RESULTS: The operation time in group A was significantly shorter than that in group B ( t=2.442, P=0.021), but there was no significant difference in the intraoperative blood loss between the two groups ( t=0.812, P=0.403). All patients were followed up 24-36 months, with an average of 28.5 months. According to Pitzen's criteria for cervical interbody fusion, bone fusion achieved in both groups. The VAS score, JOA score, C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height of the two groups at 1 and 24 months after operation were significantly improved when compared with those before operation ( P<0.05). The C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height of group A at 24 months changed significantly compared with those at 1 month ( P<0.05). The other indexes of the two groups showed no significant difference between the different time points after operation ( P>0.05). There were significant differences in C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height between the two groups at 24 months after operation ( P<0.05); but there was no significant difference in the clinical indexes at 1 and 24 months and the imaging indexes at 1 month between the two groups ( P>0.05). CONCLUSION: Compared with the PCC, the zero-profile and self-locking intervertebral cage can significantly shorten the operation time and obtain the same clinical efficacy, but the intervertebral height loss and secondary cervical curvature change after operation is more serious.

Can Zero-Profile Cage Maintain the Cervical Curvature Similar to Plate-Cage Construct for Single-Level Anterior Cervical Diskectomy and Fusion?

OBJECTIVE: We sought to compare the clinical and radiologic outcomes after anterior cervical surgery between zero-profile (Zero-P) cage and plate-cage construct (PCC). METHODS: One-hundred and sixteen patients with single-level cervical disk herniation who underwent anterior cervical diskectomy and fusion between May 2015 and March 2017 were enrolled. They were divided into a Zero-P group (61 cases) and a PCC group (55 cases). At 1, 6, 12, and 24 months after the operation, routine follow-up evaluation was recommended including visual analog scale score and Japanese Orthopaedic Association score. The lateral x-ray film was performed at 1 and 24 months postoperatively. RESULTS: All 116 patients successfully completed the operation and achieved bone fusion. While there was no significant difference in the amount of bleeding between the 2 groups, the operation time of the Zero-P group was significantly shorter than that of the PCC group with statistically difference. The visual analog scale score and Japanese Orthopaedic Association score of the 2 groups at each follow-up interval postoperatively were significantly improved compared with that before operation; the difference was statistically significant (P < 0.05, respectively). While all the C2-7 cervical curvature, segmental Cobb angle, and height of adjacent vertebral body were lost at the 24-month follow-up, the significant difference was observed in the Zero-P group (P < 0.05, respectively). CONCLUSIONS: Compared with the Zero-P system, the PCC system provides a comparable clinical outcome. Although it showed the disadvantages in controlling the operation time and surgical bleeding, the radiologic outcome was better at the 2-year follow-up.

Application of 3d printed interbody fusion cage for cervical spondylosis of spinal cord type: Half-year follow-up of recovery of cervical curvature and intervertebral height / 中国组织工程研究

BACKGROUND: Recent clinical studies have found that during the implantation of biomaterials, the internal environment of the body will change to a certain extent, and different levels of immunity and stress responses will occur. There are also obvious differences in the immune and stress responses of different biological materials. OBJECTIVE: To investigate the effect of 3D printed interbody fusion cage on patients with cervical spondylosis of spinal cord type and its effect on serum cortisol and norepinephrine levels. METHODS: Sixty-three patients with cervical spondylotic myelopathy who were admitted to the Affiliated Hospital of Chengde Medical University from July 2015 to July 2018 were selected, including 40 males and 23 females, aged 30-78 years old. The patients were randomly divided into a research group (n=31) and a control group (n=32) according to a random number table. All patients received anterior cervical decompression and bone graft fusion and internal fixation. Patients in the research group were implanted with 3D printed intervertebral fusion cage during operation. The patients in the control group were implanted with polyetheretherketone interbody fusion cage and allogeneic bone. The operation and complications of the two groups were compared. Serum cortisol and norepinephrine levels were detected before and 1 and 3 days after operation. Cervical curvature and intervertebral height were measured before surgery, 1 week, and 6 months after surgery. Axial symptoms were counted at 6 months after surgery. The trial was approved by the Ethics Committee of the Affiliated Hospital of Chengde Medical University. RESULTS AND CONCLUSION: (1) Operation time, intraoperative blood loss and hospitalization time were not significantly different between the two groups (P > 0.05). (2) Among 31 cases, there were 1 case of screw loosening and 1 case of implant movement in the research group. Among 32 cases, there were 3 cases of screw loosening, 3 cases of immune rejection, 2 cases of implant movement, and 1 case of implant collapse in the control group. The incidence of complications was lower in the research group than that in the control group (P < 0.05). (3) At 1 and 3 days after operation, the levels of cortisol and norepinephrine were higher in both groups than those before surgery (P < 0.05), but above levels were lower in the research group than in the control group (P < 0.001). (4) The cervical curvature and intervertebral height at 1 week and 6 months after operation in both groups were higher than those before surgery (P < 0.05), and above indexes were higher in the research group than in the control group (P < 0.05). (5) The axial symptom in the research group was lighter than that in the control group at 6 months after operation (P < 0.05). (6) The results show that the application of 3D printed interbody fusion cage to cervical spondylotic myelopathy can reduce complications, promote the recovery of cervical curvature and intervertebral height, and improve the stability of cervical spine, and the body’s stress response and axial symptoms are mild.

Comparison of cervical motion range and curvature after C3 laminectomy and mini-titanium plate fixation after single-door vertebroplasty / 中国组织工程研究

BACKGROUND: Axial symptoms often occur in patients after posterior cervical single-door vertebroplasty. Some studies have proposed a modified surgical method to remove C3 lamina and retain cervical semisacinous muscle on C2 spinous to reduce the occurrence of axial symptoms after surgery. OBJECTIVE: To compare the clinical effects, cervical motion range and curvature of C3 laminectomy and mini-titanium plate fixation after single-door vertebroplasty. METHODS: Totally 43 patients with cervical spondylosis were selected from the General Hospital of Southern Theater Command of PLA from June 2012 to June 2017, including 25 males and 18 females. Among them, 27 patients underwent C3-6 or C3-7 single-door mini-titanium fixation vertebroplasty as fixation group and 16 patients underwent C4-6 or C4-7 single-door mini-titanium fixation vertebroplasty through posterior approach after C3 laminectomy as resection group. Preoperatively, 6 months postoperatively and at final follow-up, JOA score, cervical motion range, and C2-7 Cobb angle were compared between the two groups. This study was approved by the Ethics Committee of General Hospital of Southern Theater Command of PLA. RESULTS AND CONCLUSION: (1) All 43 patients successfully underwent the operation without vascular or spinal cord injury. (2) JOA score was higher in the two groups at postoperative 6 months and final follow-up than that preoperatively (P 0.05). (3) Motion range in the two groups was smaller at postoperative 6 months and final follow-up than that preoperatively (P < 0.05). Motion range was smaller in the fixation group than in the resection group at postoperative 6 months and final follow-up (P < 0.05). (4) C2-1 Cobb angle in the two groups was smaller at postoperative 6 months and final follow-up than that preoperatively (P < 0.05). C2-7 Cobb angle was smaller in the fixation group than in the resection group at postoperative 6 months and final follow-up (P < 0.05). (5) There was no hypersensitivity, rejection or immune response in the two groups. (6) Results indicate that C3 laminectomy and mini-titanium plate fixation have the same effect on improving neurological function, but the removal of C3 lamina can more effectively prevent the reduction of postoperative cervical motion range and curvature.

Relationship between Cervical Curvature and Spinal Drift Distance after Laminectomy with Screw Fixation and Its Effect on Clinical Outcome / 中国康复理论与实践

Objective:To observe the relationship between cervical curvature and spinal drift distance after laminectomy with lateral mass screw fixation, and its effect on clinical outcome. Methods:From January, 2017 to October, 2018, a total of 117 patients with cervical spondylotic myelopathy (CSM) underwent laminectomy with lateral mass screw fixation, and 90 of them completed the follow-up. According to the patients' cervical curvature (CC), they were divided into three groups: those CC between 0° to 5° were in Group A (n = 28), 5° to 16.5° in Group B (n = 36) and CC > 16.5° in Group C (n = 26). The spinal drift distance, nerve recovery, axial symptoms and C5 palsy were recorded and analyzed. Results:There were significant differences in CC and spinal drift distance (F > 152.119,P < 0.001), and no significant difference was found in laminectomy width and incidence of C5 palsy (P > 0.05) among three groups. The Japanese Orthopaedic Association (JOA) score significantly increased in all the groups post operation and at the last follow-up (t > 8.869,P < 0.001), and no significant difference was found among there groups at the same time (P > 0.05), as well as the incidence of C5 palsy (F = 0.472,P = 0.625). There was significant difference in the score of Visual Analogue Scale of axial symptoms among three groups (F > 34.800,P < 0.001), which was lower in groups B and C than in group A (t > 5.845,P< 0.001), and no significant differene was found between group B and group C. Conclusion:On the basis of the same laminectomy width, the greater the CC was, the more favorable the spinal drift went backwards. The loss of CC was related to the occurrence of axial symptoms, but was not correlated with the neurological recovery and C5 palsy.

Effect of zero-profile and self-locking intervertebral cage and plate-cage construct on maintenance of cervical curvature after anterior cervical surgery / 中国修复重建外科杂志

Objective: To compare differences in the maintenance of cervical curvature after anterior cervical surgery between zero-profile and self-locking intervertebral cage and plate-cage construct (PCC). Methods: A clinical data of 100 patients with single-segment cervical disc herniation who were treated with anterior cervical discectomy and fusion were retrospectively analyzed between January 2015 and January 2016. Among them, 50 patients were treated with the zero-profile and self-locking intervertebral cage (group A) and 50 patients with the PCC (group B). There was no significant difference between the two groups in age, gender, bone mineral density, disease duration, operative segment, and preoperative visual analogue scale (VAS) score, Japanese Orthopaedic Association (JOA) score, C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height ( P>0.05). The operation time and intraoperative blood loss were recorded. The postoperative VAS and JOA scores were used to evaluate the clinical efficacy. The C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height were measured on lateral X-ray films, and the interbody fusion was evaluated according to Pitzen's criteria. Results: The operation time in group A was significantly shorter than that in group B ( t=2.442, P=0.021), but there was no significant difference in the intraoperative blood loss between the two groups ( t=0.812, P=0.403). All patients were followed up 24-36 months, with an average of 28.5 months. According to Pitzen's criteria for cervical interbody fusion, bone fusion achieved in both groups. The VAS score, JOA score, C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height of the two groups at 1 and 24 months after operation were significantly improved when compared with those before operation ( P0.05). There were significant differences in C 2-7 cervical curvature, segmental Cobb angle, and adjacent vertebral height between the two groups at 24 months after operation ( P0.05). Conclusion: Compared with the PCC, the zero-profile and self-locking intervertebral cage can significantly shorten the operation time and obtain the same clinical efficacy, but the intervertebral height loss and secondary cervical curvature change after operation is more serious.

Importance of the Occipitoaxial Angle and Posterior Occipitocervical Angle in Occipitocervical Fusion.

OBJECTIVE: To observe the effects of occipitoaxial angle (O-C2 angle, OC2A) and posterior occipitocervical angle (POCA) selection on postoperative clinical efficacy and lower cervical curvature in patients with acute acquired atlantoaxial dislocation after occipitocervical fusion (OCF). METHODS: A total of 150 healthy subjects without cervical disease (healthy group) were randomly selected based on gender and age. Three spine surgeons measured the OC2A and POCA of the healthy group and averaged the values. A total of 30 patients with an average age of 51.0 years (range, 18-70 years; 16 male and 14 female) with trauma or rheumatoid arthritis (disease group) who underwent occipitocervical fusion (OCF) for atlantoaxial dislocation between January 2012 and June 2016 were reviewed. OC2A, POCA, and cervical spinal angle (CSA) were measured postoperative/soon after surgery and ambulation, and at the final follow-up visit. The preoperative and final follow-up visual analog scale (VAS), Japanese orthopedics association score (JOA), neck disability index (NDI), and dCSA (change of CSA from postoperative/soon after surgery and ambulation to final follow-up) were recorded. RESULTS: The values of OC2A and POCA in 150 healthy subjects were 14.5° ± 3.7° and 108.2° ± 8.1°, respectively, and the 95% confidence interval (CI) were 7.2°-21.8° and 92.3°-124.0°, respectively. There was a negative correlation between OC2A and POCA (r = -0.386, P < 0.001). There were 18 patients (group one) of ideal OC2A and POCA (both within 95% CI of the healthy group) postoperative/soon after surgery and ambulation with a mean follow-up time of 26.3 ± 20.9 months in disease group. The remaining patients (group two) with a mean follow-up time of 31.3 ± 21.3 months. There was no statistically significant difference in the baseline data as well as pre-operative outcomes, including VAS score, JOA score, and NDI between the two groups. Likewise, the post-operative outcomes in final follow-up, including VAS and JOA score, had no distinct difference in the two groups. However, NDI (11.0 ± 2.9) in group two at the final follow-up was significantly higher than that in group one (7.0 ± 2.3) (P < 0.001). And group two showed statistically greater dCSA (5.9 ± 7.5°) than group one (-2.3° ± 6.2°) (P = 0.003). CONCLUSIONS: The negative correlation between OC2A and POCA plays an important role in maintaining the biodynamic balance of the occipital-cervical region. OC2A and POCA should be controlled of a normal population in patients with acute acquired atlantoaxial dislocation during OCF, which can further improve the clinical efficacy and prevent loss of lower cervical curvature after surgery.