Linking the removal of enrofloxacin to the extracellular polymers of microalgae in water bodies: A case study focusing on the shifts in microbial communities.

Microalgae can promote antibiotic removal, which has attracted growing attention. However, its synergistic removal performance with bacteria in antibiotic pollutants is still poorly understood. In this study, firstly, we selected two green algae (Dictyosphaerium sp. and Chlorella sp.) and exposed them to Enrofloxacin (ENR) to observe their extracellular polysaccharides (EPS) concentration dynamic and the removal of antibiotics. Secondly, EPS was extracted and added to in situ lake water (no algae) to investigate its combined effect with bacteria. The results indicate that both Dictyosphaerium sp. and Chlorella sp. exhibited high tolerance to ENR stress. When the biomass of microalgae was low, ENR could significantly stimulate algae to produce EPS. The removal rates of Dictyosphaerium sp. and Chlorella sp. were 15.8% and 10.5%, respectively. The addition of EPS can both alter the microbial community structure in the lake water and promote the removal of ENR. The LEfSe analysis showed that there were significant differences in the microbial marker taxa, which promoted the increase of special functional bacteria for decomposing ENR, between the EPS-added group and the control group. The EPS of Dictyosphaerium sp. increased the abundance of Moraxellaceae and Spirosomaceae, while the EPS of Chlorella sp. increased the abundance of Sphingomonadaceae and Microbacteriaceae. Under the synergistic effect, Chlorella sp. achieved a maximum removal rate of 24.2%, while Dictyosphaerium sp. achieved a maximum removal rate of 28.9%. Our study provides new insights into the removal performance and mechanism of antibiotics by freshwater microalgae in water bodies and contribute to the development of more effective water treatment strategies.

Characterization and potentiality of plant-derived silver nanoparticles for enhancement of biomass and hydrogen production in Chlorella sp. under nitrogen deprived condition.

Energy is a crucial entity for the development and it has various alternative forms of energy sources. Recently, the synthesis of nanoparticles using benign biocatalyst has attracted increased attention. In this study, silver nanoparticles were synthesized and characterized using Azadirachta indica plant-derived phytochemical as the reducing agent. Biomass of the microalga Chlorella sp. cultivated in BG11 medium increased after exposure to low concentrations of up to 0.48 mg L-1 AgNPs. In addition, algal cells treated with 0.24 mg L-1 AgNPs and cultivated in BG110 medium which contained no nitrogen source showed the highest hydrogen yield of 10.8 mmol L-1, whereas the untreated cells under the same conditions showed very low hydrogen yield of 0.003 mmol L-1. The enhanced hydrogen production observed in the treated cells was consistent with an increase in hydrogenase activity. Treatment of BG110 grown cells with low concentration of green synthesized AgNPs at 0.24 mg L-1 enhanced hydrogenase activity with a 5-fold increase of enzyme activity compared to untreated BG110 grown cells. In addition, to improve photolytic water splitting efficiency for hydrogen production, cells treated with AgNPs at 0.24 mg L-1 showed highest oxygen evolution signifying improvement in photosynthesis. The silver nanoparticles synthesized using phytochemicals derived from plant enhanced both microalgal biomass and hydrogen production with an added advantage of CO2 reduction which could be achieved due to an increase in biomass. Hence, treating microalgae with nanoparticles provided a promising strategy to reduce the atmospheric carbon dioxide as well as increasing production of hydrogen as clean energy.

Effect of interactions between humic acid and cerium oxide nanoparticles on the toxicity to the Chlorella sp.

With the wide application of nanomaterials, the concentration of nanomaterials in natural water continues to increase, which poses a severe threat to the water environment. However, the influence of organic matter and nanomaterials rich in natural water on the toxic effect of algae growth is still unclear. In this study, the effects of humic acid (HA) and nano-cerium oxide (nCeO2) on the physiology and transcriptome of Chlorella sp. were analyzed, and the mechanism of the toxic effect of HA on Chlorella sp. under nCeO2 stress was revealed. Under 20-200 mg/L nCeO2 stress, the growth of Chlorella cells was inhibited and the highest inhibition rate reached 52% within 200 mg/L nCeO2. The Fv/Fm and ETRmax values of Chlorella sp. decreased from 0.490 and 24.45 (20 mg/L nCeO2) to 0.488 and 23.4 (100 mg/L nCeO2), respectively. Under the stimulation of nCeO2, the level of reactive oxygen species in algal cells was increased, accompanied by lipid peroxidation and membrane damage. However, the addition of HA at concentrations of 5-10 mg/L effectively alleviated the toxic effect of nCeO2 on Chlorella sp. Transcriptome analysis showed that 10 mg/L HA could alleviate the cellular stress at 100 mg/L nCeO2 on Chlorella sp. by regulating genes related to photosynthesis and metabolism pathways. Moreover, the downregulation of genes (e.g., Lhca1, Lhcb1, AOC3, and AOC2) indicated that HA reduced the level of oxidative stress in Chlorella sp. These findings offer novel insights of evaluating the ecotoxicity nCeO2 and HA in natural water environment and their impact on Chlorella sp.

Nickel adsorbed algae biochar based oxygen reduction reaction catalyst.

Lately, the bio electrochemical systems are emerging as an efficient wastewater treatment and energy conversion technology. However, their scaling-up is considerably restrained by slow-rate of cathodic oxygen reduction reaction (ORR) or otherwise by the high cost associated with the available efficient ORR catalysts. In this investigation, a cost-effective and eco-friendly approach for synthesizing Ni based ORR catalyst utilizing biosorption property of microalgae is accomplished. The synthesised Ni adsorbed algal biochar (NAB) served as an efficient cathode catalyst for enhancing ORR in a microbial carbon-capture cell (MCC). On increasing the initial concentration of Ni2+ in the aqueous medium from 100 mgL-1 to 500 mgL-1, the biosorption capacity was found to increase from 3 mgg-1 to 32 mgg-1 of algae cell. The MCC operated with NAB based cathode catalyst loading of 2 mgcm-2 exhibited 3.5 times higher power density (4.69 Wm-3) as compared to the one with commercial activated carbon. A significant organic matter removal (82 %) in the anodic chamber with simultaneous algal biomass productivity in the cathodic chamber was attained by MCC with cathode loaded with 2 mgcm-2 of NAB. Hence, this easily synthesised low-cost catalyst, out of waste stream, proved its ability to improve the performance of MCC.

A sulfated exopolysaccharide derived from Chlorella sp. exhibiting in vitro anti-α-D-Glucosidase activity.

There is a great scientific curiosity to discover all environments sheltering microalgae, especially those with exceptional characteristics from coldest to hottest ones, the purpose remains to explore the potential of the native microalgae flora and the research for new bioactive compounds. This study aimed to isolate a polysaccharide-producing microalga from an extreme ecosystem and to evaluate its capacity to inhibit the α-D-glucosidase enzyme. Chlorella strain is isolated from hypersaline Lake in the Algerian desert. The exopolysaccharide extraction was performed by the concentration of free-cell supernatant in a rotary evaporator. The infrared analysis showed a characteristic footprint of carbohydrates with particular functional groups, such as sulfate. Gas chromatography-mass spectrometry has revealed a hetero-exopolysaccharide composed of galactose 35.75%, glucose 21.13%, xylose 16.81%, fructose 6.96%, arabinose 5.10%, and glucuronic acid 2.68%. The evaluation of the anti-hyperglycemic activity demonstrated a significant α-D-glucosidase inhibition of 80.94 ± 0.01% at 10 mg mL-1 with IC50 equal to 4.31 ± 0.20 mg mL-1. This study opens a vast prospect to use exopolysaccharides as natural nutraceutical or food additive.

Enhancing biomass and lipid accumulation by a novel microalga for unsterilized piggery biogas slurry remediation.

The cost and efficiency of an algal-BS treatment system are determined by the specific microalgal species and BS pretreatment method. This study examines the growth of a novel algae Chlorella sp. YSD-2 and the removal of nutrients from the BS using different pretreatment methods, including dilution ratio and sterilization. The highest biomass production (1.84 g L-1) was achieved in the 1:2 unsterilized biogas slurry, which was 2.03 times higher than that in the sterilized group, as well as higher lipid productivity (17.29 mg L-1 d-1). Nevertheless, the sterilized biogas slurry at a 1:1 dilution ratio exhibited the most notable nutrient-removal efficiency, with COD at 71.97%, TP at 91.32%, and TN at 88.80%. Additionally, the analysis of 16S rRNA sequencing revealed a significant alteration in the indigenous bacterial composition of the biogas slurry by microalgal treatment, with Proteobacteria and Cyanobacteria emerging as the predominant phyla, and unidentified_Cyanobacteria as the primary genus. These findings suggest that Chlorella sp. YSD-2 exhibits favorable tolerance and nutrient-removal capabilities in unsterilized, high-strength biogas slurry, along with high productivity of biomass and lipids. Consequently, these results offer a theoretical foundation for the development of an efficient and economically viable treatment method for algal-BS.

Unveiling the role of ferrous ion in driving microalgae granulation from salt-tolerant strains for mariculture wastewater treatment.

Development of microalgal-bacterial granular sludge (MBGS) from saline-adapted microalgae is a promising approach for efficient mariculture wastewater treatment, whereas the elusive mechanisms governing granulation have impeded its widespread adoption. In this study, spherical and regular MBGS were successfully developed from mixed culture of pure Spirulina platensis and Chlorella sp. GY-H4 at 10 mg/L Fe2+ concentration. The addition of Fe2+ was proven to induce the formation of Fe-precipitates which served as nucleation sites for microbial attachment and granulation initiation. Additionally, Fe2+ increased the prevalence of exopolysaccharide-producing cyanobacteria, i.e. Synechocystis and Leptolyngbya, facilitating microbial cell adhesion. Furthermore, it stimulated the secretion of extracellular proteins (particularly tryptophan and aromatic proteins), which acted as structural backbone for the development of spherical granule form microalgal flocs. Lastly, it fostered the accumulation of exogenous heterotrophic functional genera, resulting in the efficient removal of DOC (98 %), PO43--P (98 %) and NH4+-N (87 %). Nevertheless, inadequate Fe2+ hindered microalgal floc transformation into granules, excessive Fe2+ expanded the anaerobic zone within the granules, almost halved protein content in the TB-EPS, and inhibited the functional genes expression, ultimately leading to an irregular granular morphology and diminished nutrient removal. This research provides valuable insights into the mechanisms by which Fe2+ promotes the granulation of salt-tolerant microalgae, offering guidance for the establishment and stable operation of MBGS systems in mariculture wastewater treatment.

Unlocking synergies: Harnessing the potential of biological methane sequestration through metabolic coupling between Methylomicrobium alcaliphilum 20Z and Chlorella sp. HS2.

A halotolerant consortium between microalgae and methanotrophic bacteria could effectively remediate in situ CH4 and CO2, particularly using saline wastewater sources. Herein, Methylomicrobium alcaliphilum 20Z was demonstrated to form a mutualistic association with Chlorella sp. HS2 at a salinity level above 3.0%. Co-culture significantly enhanced the growth of both microbes, independent of initial inoculum ratios. Additionally, increased methane provision in enclosed serum bottles led to saturated methane removal. Subsequent analyses suggested nearly an order of magnitude increase in the amount of carbon sequestered in biomass in methane-fed co-cultures, conditions that also maintained a suitable cultural pH suitable for methanotrophic growth. Collectively, these results suggest a robust metabolic coupling between the two microbes and the influence of the factors other than gaseous exchange on the assembled consortium. Therefore, multi-faceted investigations are needed to harness the significant methane removal potential of the identified halotolerant consortium under conditions relevant to real-world operation scenarios.

Assessment of heavy metals and environmental stress conditions on the production potential of polyunsaturated fatty acids (PUFAs) in indigenous microalgae isolated from the Gulf of Mannar coastal waters.

The present study evaluated the effects of heavy metals, viz., lead, mercury, and cadmium, on growth, chlorophyll a, b, c, carotenoids, and PUFA content of marine microalgae Chlorella sp. and Cylindrotheca fusiformis. At 96-h exposure, the IC50 values for Hg2+, Pb2+, and Cd2+ were 0.85 mg/L, 2.4 mg/L, and 5.3 mg/L respectively, in Chlorella sp. In C. fusiformis, IC50 values for Hg2+, Pb2+, and Cd2+ were 0.5 mg/L, 1.2 mg/L, and 3 mg/L respectively. The pigment contents of both microalgae were significantly affected upon heavy metal exposure. In Chlorella sp. and C. fusiformis, the exposed concentrations of Hg2+ averagely decreased the PUFA content by 76.34% and 78.68%, respectively. Similarly, Pb2+-exposed concentrations resulted in 54.50% and 82.64% average reductions in PUFA content of Chlorella sp. and C. fusiformis, respectively. Cd2+-exposed concentrations showed 32.58% and 40.54% average reduction in PUFA content of Chlorella sp. and C. fusiformis, respectively. Among the environmental stress conditions, the dark treatment has increased total PUFA content by 6.63% in Chlorella sp. and 3.92% in C. fusiformis. It was observed that the 50% nitrogen starvation (two-stage) significantly improved the PUFA production from 26.47 ± 6.55% to 40.92 ± 10.74% in Chlorella sp. and from 11.23 ± 5.01 to 32.8 ± 14.17% in C. fusiformis. The toxicity for both microalgae was followed in the order Hg2+ > Pb2+ > Cd2+. Among the two species, Chlorella sp. has shown a high tolerance to heavy metals and can be effectively utilized in PUFA production.

Data on growth performance of marine Chlorella sp. cultured in different cost-effective media.

This paper presents the data on growth performance of marine Chlorella sp. cultured in different cost-effective media including cow dung, cow urine, poultry litter, compost, NPK (nitrogen, phosphorus, and potassium), and UTR (Urea, TSP, and red potash). Growth curve of Chlorella sp. was determined at 5 mg of cow dung, poultry litter, compost, NPK, UTR and 5 µL of cow urine per 350 ml sea water (25 ppt) to identify the onset of stationary phase. Further four media among these were selected to continue the experiment at 8 mg and 11 mg of concentration. The higher cell densities were 4.21 × 106 and 4.18 × 106 cells/mL for NPK at 8 mg and 11 mg of concentration on 6th and 5th day, respectively. Cow dung with an 11 mg of concentration exhibited 2.67 × 106 cells/mL on the 3rd day, which is around 1.5 times greater than the highest growth in the same concentration of poultry litter. Chlorella sp. had a higher cell density in NPK media than in other media, however it was discarded since it is inorganic and costly. Due to the low cell density in cow urine media and the prolonged stationary phase in poultry litter media, the focus of the subsequent study was then placed on cow dung media. The data will contribute to the selection of locally available and cost-effective culture media by determining the stationary phases for specific microalgal species which will replace the costly and labor-intensive commercial media.

Optimization and Characterization of Spirulina and Chlorella Hydrolysates for Industrial Application.

Chlorella and Spirulina are the most used microalgae mainly as powder, tablets, or capsules. However, the recent change in lifestyle of modern society encouraged the emergence of liquid food supplements. The current work evaluated the efficiency of several hydrolysis methods (ultrasound-assisted hydrolysis UAH, acid hydrolysis AH, autoclave-assisted hydrolysis AAH, and enzymatic hydrolysis EH) in order to develop liquid dietary supplements from Chlorella and Spirulina biomasses. Results showed that, EH gave the highest proteins content (78% and 31% for Spirulina and Chlorella, respectively) and also increased pigments content (4.5 mg/mL of phycocyanin and 12 µg/mL of carotenoids). Hydrolysates obtained with EH showed the highest scavenging activity (95-91%), allowing us, with the other above features, to propose this method as convenient for liquid food supplements development. Nevertheless, it has been shown that the choice of hydrolysis method depended on the vocation of the product to be prepared.

Nutrient sequestration and lipid production potential of Chlorella vulgaris under pharmaceutical wastewater treatment: experimental, optimization, and prediction modeling studies.

The efficient management and treatment of pharmaceutical industry wastewater (PIWW) have become a serious environmental issue due to its high toxicity. To overcome this problem, the present study deals with the phycoremediation of PIWW using Chlorella vulgaris microalga isolated from the Ganga River at Haridwar, India. For this, response surface methodology (RSM) and artificial neural network (ANN) tools were used to identify the best reduction of total phosphorus (TP) and total Kjeldahl's nitrogen (TKN) based pollutants along with the lipid production efficiency of C. vulgaris. Three different concentrations of pharmaceutical wastewater (0, 50, and 100%), operating temperatures (20, 25, and 30 °C), and light intensity (2000, 3000, and 4000 lx) were used to design the phycoremediation experiments having 6:18 h of dark/light period and reactor functional volume of 15L. Findings revealed that C. vulgaris was good enough to remove maximum TP (90.35%), TKN (83.55%) along 20.88% of lipid yield at 25.62 °C temperature, 60.73% PIWW concentration, and 4000 lx of light intensity, respectively. Based on the model performance and validation results, ANN showed more accuracy as compared to the RSM tool. Therefore, the findings of this study showed that C. vulgaris is capable of treating PIWW efficiently along with significant production of lipid content which can further be used in various applications including biofuel production.

Introducing of high rich lysine, arginine, and unsaturated fatty acids microalga as a food supplement.

Microalgae are powerful source for nutritionally valuable components as proteins, carbohydrates and especially unsaturated fatty acids. Microalgae may be employed in pharmaceutical, food, cosmetic, health industries, and biofuels. In this study for looking at high-level unsaturated fatty acids species, from 31 strains, by comparing growth curves, the best strain with a high growth rate and lipid content was selected by red Nile staining. It was determined by molecular identification that this strain belongs to the genus Chlorella sp. and is deposited into the Agricultural Biotechnology Research Institute of Iran Culture collection with culture collection number ABRIICC 30,041. Biomass analysis after growth optimization by response surface methodology showed that the selected strain had a specific growth rate of 0.216 ± 0.008 d-1, biomass productivity of 142.58 ± 4.41 mg/Ld, and lipid content of 13.9 ± 0.26% with a high level of unsaturated fatty acids of 53.15%. It also included 51.3 ± 0.53% protein with a very high quality essential amino acids of 40.36%, the most lysine (8.77%) and arginine (13.31%) has been reported until now, and 26.9 ± 0.23% carbohydrates in photoautotroph condition. By MTT assay, there is no effect of cytotoxicity. This research introduces a potent native strain comparable with commercial strains that can be a hopeful source for food supplements and valuable bioactive ingredients in functional foods.

Use of biochar and a post-coagulation effluent as an adsorbent of malachite green, beneficial bacteria carrier, and seedling substrate for plants belonging to the poaceae family.

Wastewater treatment plants produce solid and semi-solid sludge, which treatment minimises secondary environmental pollution because of wastewater treatment and obtaining new bioproducts. For this reason, in this paper, the co-pyrolysis of biogenic biomasses recovered from a biological reactor with immobilised fungal and bacterial biomass and a tertiary reactor with Chlorella sp. used for dye-contaminated wastewater treatment was carried out. Biogenic biomasses mixed with pine bark allowed the production and characterisation of two types of biochar. The raw material and biochar were on the "in vitro" germination of Lolium sp. seeds, followed by adsorption studies for malachite green (MG) dye using the raw material and the biochar. Results showed that using 60 mg L-1 of a cationic coagulant at pH 6.5 allowed for the recovery of more than 90% of the microalgae after 50 min of processing. Two biochar resulted: BC300, at pH 5.08 ± 0.08 and BC500, at pH 6.78 ± 0.01. The raw material and both biochars were co-inoculated with growth-promoting bacteria; their viabilities ranged from 1.7 × 106 ± 1.0 × 101 to 7.5 × 108 ± 6.0 × 102 CFU g-1 for total heterotrophic, nitrogen-fixing and phosphate-solubilising bacteria. Re-use tests on Lolium sp. seed germination showed that with the post-coagulation effluent, the germination was 100%, while with the biochar, with and without beneficial bacteria, the germination was 98 and 99%, respectively. Finally, BC500 adsorbed the highest percentage of malachite green at pH 4.0, obtaining qecal values of 0.5249 mg g-1 (R2: 0.9875) with the pseudo-second-order model. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-023-03766-x.

Construction of a mycelium sphere using a Fusarium strain isolate and Chlorella sp. for polyacrylamide biodegradation and inorganic carbon fixation.

In the context of global demand for carbon reduction, the formation of inorganic carbon (IC) in the wastewater from oil flooding becomes a potential threat. In this study, Chlorella sp. and Fusarium sp. were used to assemble a fungal-algal pellet to degrade polyacrylamide (PAM) and fix IC in synthetic oil-flooding wastewater. The results showed that the combination of Chlorella sp. and Fusarium sp. was more effective at degrading PAM and removing carbon than a monoculture. With PAM as the sole nitrogen source, the degradation of PAM by the consortium was enhanced up to 35.17 ± 0.86% and 21.63 ± 2.23% compared with the monocultures of fungi or microalgae, respectively. The degradation of the consortium was significantly enhanced by the addition of an external nitrogen source by up to 27.17 ± 2.27% and 22.86 ± 2.4% compared with the monoculture of fungi or microalgae, respectively. This may depend on the effect of synergy between the two species. For the removal of IC from the water, the removal efficiency of the consortium was higher than that of the microalgae by 38.5 ± 0.08%, which may be attributed to the ability of the fungi to aid in the adsorption of nutrients and its assimilation by the microalgae. Therefore, the Fusarium-Chlorella consortium can effectively degrade PAM, while simultaneously fixing carbon, which provides a feasible scheme for the treatment and carbon neutralization of the wastewater that contains PAM.

Applying an internal transcribed spacer as a single molecular marker to differentiate between Tetraselmis and Chlorella species.

In the realm of applied phycology, algal physiology, and biochemistry publications, the absence of proper identification and documentation of microalgae is a common concern. This poses a significant challenge for non-specialists who struggle to identify numerous eukaryotic microalgae. However, a promising solution lies in employing an appropriate DNA barcoding technique and establishing comprehensive databases of reference sequences. To address this issue, we conducted a study focusing on the molecular characterization and strain identification of Tetraselmis and Chlorella species, utilizing the internal transcribed spacer (ITS) barcode approach. By analyzing the full nuclear ITS region through the Sanger sequencing approach, we obtained ITS barcodes that were subsequently compared with other ITS sequences of various Tetraselmis and Chlorella species. To ensure the reliability of our identification procedure, we conducted a meticulous comparison of the DNA alignment, constructed a phylogenetic tree, and determined the percentage of identical nucleotides. The findings of our study reveal the significant value of the ITS genomic region as a tool for distinguishing and identifying morphologically similar chlorophyta. Moreover, our results demonstrate that both the ITS1 and ITS2 regions are capable of effectively discriminating isolates from one another; however, ITS2 is preferred due to its greater intraspecific variation. These results underscore the indispensability of employing ITS barcoding in microalgae identification, highlighting the limitations of relying solely on morphological characterization.

Physicochemical characterization and antioxidant activity of polysaccharides from Chlorella sp. by microwave-assisted enzymatic extraction.

Microwave-assisted enzymatic extraction (MAEE) was used for the separation of polysaccharides from micro-Chlorella. The extraction condition of MAEE was optimized by Box-Behnken design and response surface methodology. Results showed that the optimal condition for the extraction of Chlorella sp. crude polysaccharides (CSCP) was at 50°C for 2.3 h with 380 W of microwave power and 0.31% of enzyme dosage. Under the optimal extraction condition, the extraction yield of CSCP reached 0.72%. Similarly, the α-amylase modification conditions of the CSCP were also optimized, in which the 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging rate was used as the response value. The scavenging rate of DPPH free radicals was 17.58% when enzyme dosage was 271 U/g at 51°C for 14 min. Moreover, the enzyme-modified CSCP presented a typical heteropolysaccharide mainly including glucose (48.84%), ribose (13.57%) and mannose (11.30%). MAEE used in this work achieved a high extraction yield of CSCP, which provides an efficient method for the extraction of CSCP from Chlorella sp.

Green ultrasonication-assisted extraction of microalgae Chlorella sp. for polysaturated fatty acid (PUFA) rich lipid extract using alternative solvent mixture.

Conventionally, microalgal lipid extraction uses volatile organic compounds as an extraction solvent. However, these solvents are harmful to human and environmental health. Therefore, this study evaluated the feasibility of alternative green solvents, namely, ethanol, dimethyl carbonate (DMC), cyclopentyl methyl ether (CPME), and 2-methyltetrahydrofuran (2-MeTHF) in lipid extraction from Chlorella sp. via ultrasound-assisted extraction (UAE). This study indicated that extraction parameters, such as ethanol-to-2-MeTHF ratio, solvent-to-biomass ratio, temperature, and time, significantly affected the crude lipid yield (P < 0.05). The highest crude lipid yield of 25.05 ± 0.924% was achieved using ethanol-2-MeTHF mixture (2:1, v/v) with a solvent-to-biomass ratio of 20:1 (v/w) at 60 °C for 25 min accompanying 100 W and 40 kHz. Ethanol-2-MeTHF-extracted lipids showed dominance in linoleic acid, α-linolenic acid, and palmitic acid. Overall this findings supported UAE using ethanol and 2-MeTHF as extraction solvents is a promising green alternative to conventional solvent extraction of lipids from microalgae.

Ultrasound-Assisted Lipid Extraction from Chlorella sp.: Taguchi Design and Life Cycle Assessment.

The present study delved into the enhancement of essential oil (EO) extraction process from Chlorella sp. through the implementation of ultrasound-assisted extraction. The Taguchi method was instrumental in determining the ideal parameters for the extraction process, which encompassed ultrasonic amplitude, reaction duration, hexane/ethanol (HE/EtOH) ratio, and processing temperature. The empirical findings indicated that optimal EO yield was realized at an ultrasonic amplitude of 80%, a reaction timeframe of 15 min, a HE/EtOH proportion of 3:1, and a temperature setting of 40 °C. These optimal conditions were further substantiated through additional experimentation, resulting in an EO yield of 18.8 ± 0.2%. A fatty acid profile analysis disclosed that the extracted EO predominantly consisted of long-chain fatty acids (C14-C20), with Palmitic, Heptadecanoic, Oleic, and Linoleic acids featuring as the main components. Nevertheless, a high unsaturation rate of 37.9% in the EO could potentially render it vulnerable to oxidative deterioration during storage, consequently affecting the quality of the ensuing biodiesel. A life cycle assessment of the sonication technique utilized for biodiesel production from Chlorella sp. highlighted that lipid extraction was the principal contributor to global warming and ecotoxicity, as per the CML and TRACI methods. Hence, the ultrasound-assisted extraction of EO from Chlorella sp. appears to be a promising and ecologically viable substitute to conventional techniques employed for biodiesel production.

Commercial paper as a promising carrier for biofilm cultivation of Chlorella sp. for the treatment of anaerobic digestate food effluent (ADFE): Effect on the photosynthetic efficiency.

Microalgal technology is still economically unattractive due to the high cost associated with microalgal cultivation and biomass recovery from conventional suspension cultures. Biofilm-based cultivation is a promising alternative for higher biomass yield and cheap/easy biomass harvesting opportunities. Additionally, using anaerobic digestate food effluent (ADFE) as a nutrient source reduces the cultivation cost and achieves ADFE treatment as an added value. However, the search for locally available, inexpensive, and efficient support materials is still open to research. This study evaluates the potential of commercially available, low-cost papers as support material for biofilm cultivation of Chlorella sp. and treatment of ADFE. Among the four papers screened for microalgal attachment, quill board paper performed better in higher biomass yield and stability throughout the study period. The attached growth study was done in a modular food container vessel, using anaerobic digestate food effluent (ADFE) as a nutrient source and a basal medium as a control. The microalgae grew well on the support material with higher biomass yield and productivity of 108.64 g(DW) m-2 and 9.96 g (DW) m-2 d-1, respectively, in the ADFE medium compared with 85.87 g (DW) m-2 and 4.99 g (DW) m-2 d-1, respectively in the basal medium. Chlorophyll, a fluorescence (ChlF) probe, showed that cell density in the biofilm significantly changes the photosynthetic apparatus of the algae, with evidence of stress observed as the culture progressed. Also, efficient nutrient removal from the ADFE medium was achieved in the 100 %, 85 %, and 40.2 % ratios for ammoniacal nitrogen, phosphate, and chemical oxygen demand (COD). Therefore, using quill board paper as carrier material for microalgal cultivation offers promising advantages, including high biomass production, easy biomass harvesting (by scrapping or rolling the biomass with the paper), and efficient effluent treatment.