Pristine/magnesium-loaded biochar and ZVI affect rice grain arsenic speciation and cadmium accumulation through different pathways in an alkaline paddy soil.

Cadmium (Cd) and arsenic (As) co-contamination has threatened rice production and food safety. It is challenging to mitigate Cd and As contamination in rice simultaneously due to their opposite geochemical behaviors. Mg-loaded biochar with outstanding adsorption capacity for As and Cd was used for the first time to remediate Cd/As contaminated paddy soils. In addition, the effect of zero-valent iron (ZVI) on grain As speciation accumulation in alkaline paddy soils was first investigated. The effect of rice straw biochar (SC), magnesium-loaded rice straw biochar (Mg/SC), and ZVI on concentrations of Cd and As speciation in soil porewater and their accumulation in rice tissues was investigated in a pot experiment. Addition of SC, Mg/SC and ZVI to soil reduced Cd concentrations in rice grain by 46.1%, 90.3% and 100%, and inorganic As (iAs) by 35.4%, 33.1% and 29.1%, respectively, and reduced Cd concentrations in porewater by 74.3%, 96.5% and 96.2%, respectively. Reductions of 51.6% and 87.7% in porewater iAs concentrations were observed with Mg/SC and ZVI amendments, but not with SC. Dimethylarsinic acid (DMA) concentrations in porewater and grain increased by a factor of 4.9 and 3.3, respectively, with ZVI amendment. The three amendments affected grain concentrations of iAs, DMA and Cd mainly by modulating their translocation within plant and the levels of As(III), silicon, dissolved organic carbon, iron or Cd in porewater. All three amendments (SC, Mg/SC and ZVI) have the potential to simultaneously mitigate Cd and iAs accumulation in rice grain, although the pathways are different.

Dilute concentrations of maritime fuel can modify sediment reworking activity of high-latitude marine invertebrates.

Multiple expressions of climate change, in particular warming-induced reductions in the type, extent and thickness of sea ice, are opening access and providing new viable development opportunities in high-latitude regions. Coastal margins are facing these challenges, but the vulnerability of species and ecosystems to the effects of fuel contamination associated with increased maritime traffic is largely unknown. Here, we show that low concentrations of the water-accommodated fraction of marine fuel oil, representative of a dilute fuel oil spill, can alter functionally important aspects of the behaviour of sediment-dwelling invertebrates. We find that the response to contamination is species specific, but that the range in response among individuals is modified by increasing fuel concentrations. Our study provides evidence that species responses to novel and/or unprecedented levels of anthropogenic activity associated with the opening up of high-latitude regions can have substantive ecological effects, even when human impacts are at, or below, commonly accepted safe thresholds. These secondary responses are often overlooked in broad-scale environmental assessments and marine planning yet, critically, they may act as an early warning signal for impending and more pronounced ecological transitions.

An Overview of Appropriate Medical Practice and Preparedness in Radiation Emergency Response.

Radiation emergencies involving high doses of nuclear radiation pose significant risks from exposure to ionizing radiation in various scenarios. These situations include transportation accidents involving radioactive materials, occupational exposure, nuclear detonations, dirty bombs, and nuclear power plant accidents. In addition to the immediate risks of acute radiation syndrome (ARS) and related diseases, long-term exposure can increase the risk of other health issues such as cardiovascular disease and cancer. Vulnerable populations, including pregnant women and children, face particular concern due to potential impacts on their health and the health of unborn babies. The severity of ARS depends on several factors such as radiation dose, quality, dose rate, exposure uniformity, and individual biological responses. Bioindicators are biological responses or markers that help assess the severity and effects of radiation exposure on an individual. Bioindicators can include physical symptoms such as nausea, vomiting, and diarrhea, or laboratory tests such as changes in blood cell counts and gene expression that can help in assessing and treating exposed individuals. Additionally, early prodromal symptoms such as vomiting, diarrhea, and erythema can provide important clues for diagnosis and treatment. Developing a comprehensive plan for radiation emergencies is vital for safeguarding public health, infrastructure, and the environment. First responders play a critical role in establishing safety perimeters, triage, and coordination with various stakeholders. Education and training are essential for medical personnel and the public. This article provides general recommendations and identifies challenges to effective radiation emergency preparedness and response.

Faecal contamination in China: Trends, sources, and driving mechanisms.

Faecal contamination of surface waters is a global public health and economic burden. Here, we constructed a 30-year dataset to analyse the spatiotemporal trends and driving mechanisms of faecal coliforms (FCs) in China. We found that previous national policies to reduce water pollution have significantly improved the quality of surface water and, correspondingly, faecal contamination. However, the downward trend in FC levels has been more gradual than that for physico-chemical pollutants, and this trend may be exaggerated. Our results show that the driving mechanisms of faecal pollution were seasonal and complex. During the dry season, forests and grasslands were the source landscapes that exacerbated faecal pollution; during the wet season, urbanisation dominated, highlighting China's poorly designed drainage systems. Our projections revealed that faecal contamination will continue to worsen from 2022 to 2035, highlighting the need for pollution control. In the future, faecal indicators should be included in routine monitoring, evaluation, and assessment at the national level. Moreover, coordinated design of forest, grassland, and wetland landscapes is recommended for faecal pollution control at the regional level, whereas stormwater-related source control needs to be further strengthened at the urban level.

Fixed-target pump-probe SFX: eliminating the scourge of light contamination.

X-ray free-electron laser (XFEL) light sources have enabled the rapid growth of time-resolved structural experiments, which provide crucial information on the function of macromolecules and their mechanisms. Here, the aim was to commission the SwissMX fixed-target sample-delivery system at the SwissFEL Cristallina experimental station using the PSI-developed micro-structured polymer (MISP) chip for pump-probe time-resolved experiments. To characterize the system, crystals of the light-sensitive protein light-oxygen-voltage domain 1 (LOV1) from Chlamydomonas reinhardtii were used. Using different experimental settings, the accidental illumination, referred to as light contamination, of crystals mounted in wells adjacent to those illuminated by the pump laser was examined. It was crucial to control the light scattering from and through the solid supports otherwise significant contamination occurred. However, the results here show that the opaque MISP chips are suitable for defined pump-probe studies of a light-sensitive protein. The experiment also probed the sub-millisecond structural dynamics of LOV1 and indicated that at Δt = 10 µs a covalent thioether bond is established between reactive Cys57 and its flavin mononucleotide cofactor. This experiment validates the crystals to be suitable for in-depth follow-up studies of this still poorly understood signal-transduction mechanism. Importantly, the fixed-target delivery system also permitted a tenfold reduction in protein sample consumption compared with the more common high-viscosity extrusion-based delivery system. This development creates the prospect of an increase in XFEL project throughput for the field.

The impacts of thermocouple insulation failure on the accuracy of temperature measurement data in forensic fire-death scenarios-Part II: Low electrical resistance and contamination.

Part II of this two-part article investigates the impact of thermocouple insulation failure on temperature measurement data in forensic fire-death scenarios. Two different models of glass fiber-insulated thermocouple wires (GG-K-24-SLE and HH-K-24 from Omega Engineering) were passed through a ceramic kiln at temperatures up to 1093°C to measure an ice bath at a constant 0°C. In a separate experiment, the same two models of thermocouple wire plus a BLMI-XL-K-18U-120 mineral-insulated metal-sheathed thermocouple probe were passed through a wood pallet fire to measure an ice bath. In the ceramic kiln, the effect on measurement errors was determined for short vs. long exposure lengths and clean insulation vs. insulation contaminated with pork fat. Glass fiber-insulated thermocouple wires showed severe failure in both experiments, with errors ranging from -270°C to almost 2200°C. The metal-sheathed probe showed no evidence of insulation failure and continued to accurately measure the ice bath temperature within expected margins of error around 0°C. This study highlights how exposure of inadequate thermocouples to fire-level temperatures produces severe errors in temperature data. Consequently, it will not be possible to use this data to draw any accurate conclusions about the effects of fire exposure to human donors or animal proxies.

Development of a new magnetic solid-phase extraction method prior to HPLC determination of naproxen in pharmaceutical products and water samples.

In this study, a new magnetic solid phase extraction based on magnetic composite modified with biochar obtained from pumpkin peel was developed for the enrichment and extraction of Naproxen in lake water, tablet and urine samples. The effects of main parameters such as pH, extraction time, amount of adsorbent and sample volume, which affect magnetic solid phase extraction, were investigated. Under optimal conditions, intraday and interday precision values for naproxen were below 5.9, with accuracy (relative error) better than 7.0 %. The detection limit and preliminary concentration factor were 12 ng/mL and 10, respectively. The method proposed here can be used for routine analysis of naproxen in lake water, urine and tablets.

Use of Electron Microscopy for the Detection of Contaminant Endophytic Bacteria In Vitro.

The success of in vitro cultivation, particularly for micropropagation purposes, depends on the efficient control of contaminants. In this context, the sterilization of plant material constitutes a fundamental step in initiating cultures. Microbial contaminants can be found either on the surface (epiphyte) or inside plant explants (endophyte). However, the latter is generally challenging to detect and may not always be eradicated through surface sterilization alone. Endophyte contaminants, such as bacteria, can persist within plant material over several cultivation cycles, potentially interfering with or inhibiting in vitro establishment, growth, or recovery of cryopreserved materials. Therefore, microscopy techniques, such as electron microscopy, can yield valuable insights into bacterial endophytes' localization, tissue colonization patterns, and functions in in vitro plant culture. This information is essential for adopting effective strategies for eliminating, preventing, or harmonious coexistence with contaminants.

The use of vibrational spectroscopy and supervised machine learning for chemical identification of plastics ingested by seabirds.

Plastic pollution is now ubiquitous in the environment and represents a growing threat to wildlife, who can mistake plastic for food and ingest it. Tackling this problem requires reliable, consistent methods for monitoring plastic pollution ingested by seabirds and other marine fauna, including methods for identifying different types of plastic. This study presents a robust method for the rapid, reliable chemical characterisation of ingested plastics in the 1-50 mm size range using infrared and Raman spectroscopy. We analysed 246 objects ingested by Flesh-footed Shearwaters (Ardenna carneipes) from Lord Howe Island, Australia, and compared the data yielded by each technique: 92 % of ingested objects visually identified as plastic were confirmed by spectroscopy, 98 % of those were low density polymers such as polyethylene, polypropylene, or their copolymers. Ingested plastics exhibit significant spectral evidence of biological contamination compared to other reports, which hinders identification by conventional library searching. Machine learning can be used to identify ingested plastics by their vibrational spectra with up to 93 % accuracy. Overall, we find that infrared is the more effective technique for identifying ingested plastics in this size range, and that appropriately trained machine learning models can be superior to conventional library searching methods for identifying plastics.

Effects of enzyme-induced carbonate precipitation technique on multiple heavy metals immobilization and unconfined compressive strength improvement of contaminated sand.

Enzyme-induced carbonate precipitation (EICP) has been studied in remediation of heavy metal contaminated water or soil in recent years. This paper aims to investigate the immobilization mechanism of Zn2+, Ni2+, and Cr(VI) in contaminated sand, as well as strength enhancement of sand specimens by using EICP method with crude sword bean urease extracts. A series of liquid batch tests and artificially contaminated sand remediation experiments were conducted to explore the heavy metal immobilization efficacy and mechanisms. Results showed that the urea hydrolysis completion efficiency decreased as the Ca2+ concentration increased and the heavy metal immobilization percentage increased with the concentration of Ca2+ and treatment cycles in contaminated sand. After four treatment cycles with 0.5 mol/L Ca2+ added, the immobilization percentage of Zn2+, Ni2+, and Cr(VI) were 99.99 %, 86.38 %, and 75.18 %, respectively. The microscale analysis results presented that carbonate precipitates and metallic oxide such as CaCO3, ZnCO3, NiCO3, Zn(OH)2, and CrO(OH) were generated in liquid batch tests and sand remediation experiments. The SEM-EDS and FTIR results also showed that organic molecules and CaCO3 may adsorb or complex heavy metal ions. Thus, the immobilization mechanism of EICP method with crude sword bean urease can be considered as biomineralization, as well as adsorption and complexation by organic matter and calcium carbonate. The unconfined compressive strength of EICP-treated contaminated sand specimens demonstrated a positive correlation with the increased generation of carbonate precipitates, being up to 306 kPa after four treatment cycles with shear failure mode. Crude sword bean urease with 0.5 mol/L Ca2+ added is recommended to immobilize multiple heavy metal ions and enhance soil strength.

Risks of dairy derived excipients in medications for lactose intolerant and cow milk protein allergic patients.

The use of lactose and cow milk protein (CMP) as potential allergens in pharmaceuticals and their ability to cause allergic reactions remains a significant concern in medicine. Lactose, a common pharmaceutical excipient due to its inert, inexpensive, and stable properties, is found in many prescription-only and over-the-counter medications. However, despite their widespread use, individuals with lactose intolerance (LI) or cow milk protein allergy (CMPA) may experience adverse reactions to these excipients. This study investigated the prevalence of lactose and other dairy-derived ingredients in pharmaceuticals marketed in Portugal. Using the Summary of Product Characteristics (SmPC) from the INFOMED database, various medications, including analgesics, antipyretics, non-steroidal anti-inflammatory drugs (NSAIDs), and antiasthmatics, were analyzed. Results showed a high prevalence of dairy-derived excipients, particularly in antiasthmatic drugs (62.6%) and NSAIDs (39%). Although CMP are not explicitly mentioned in SmPCs, the presence of lactose as an ingredient poses a risk of cross-contamination. The findings emphasize the need for healthcare professionals to be aware of potential allergens in medications and the importance of developing lactose-free alternatives to ensure the safety of patients with LI and CMPA. Further research is required to assess the safety and implications of lactose in medicines for these populations.

Polymetallic contamination drives indigenous microbial community assembly dominated by stochastic processes at Pb-Zn smelting sites.

Indigenous microbial communities in smelting areas are crucial for maintaining fragile ecosystem functions. However, the community assembly process and their responses to polymetallic pollution are poorly understood, especially the taxa in each bin from the amplicons that contributed to the assembly process. Herein, microbial diversity, co-occurrence patterns, assembly process and the intrinsic mechanisms across contamination gradients at a typical PbZn smelting site were systematically unravelled by high-throughput sequencing. The results showed a consistent compositional profile among the indigenous communities across sampling sites, wherein genera KD4-96 from Chloroflexi and Sphingomonas from Proteobacteria emerged as the most abundant taxa. Network modularity of the high- and middle-contaminated communities at Pb and Zn smelting sites was >0.44, indicating that community populations were clustered into modules to resist high heavy metal stress. Stochastic processes dominated the community assembly, with the greatest contribution from drift (DR), which was significantly correlated with Pb, Zn, Cr and Cu contents. What's particular was that the DR-controlled bins were dominated by Proteobacteria (typical r-strategists), while the HoS-controlled bins were by Chloroflexi (typical K-strategists). Furthermore, the proportion of DR in the bins dominated by Sphingomonadaceae (phylum Proteobacteria) increased gradually with the increase of heavy metal contents. These discoveries provide essential insights for community control in restoring and mitigating soil degradation at PbZn smelting sites.

Application of soil magnetometry and geochemical methods to investigate soil contamination with antimony.

The aim of the study was an assessment of the pollution level and identification of the antimony sources in soils in areas subjected to industrial anthropopressure from: transport, metallurgy and electrical waste recycling. The combination of soil magnetometry, chemical analyzes using atomic spectrometry (ICP-OES and ICP-MS), Sb fractionation analysis, statistical analysis (Pearson's correlation matrix, factor analysis) as well as Geoaccumulation Index, Pollution Load Index, and Sb/As factor allowed not only the assessment of soil contamination degree, but also comprehensive identification of different Sb sources. The results indicate that the soil in the vicinity of the studied objects was characterized by high values of magnetic susceptibility and thus, high contents of potentially toxic elements. The most polluted area was in the vicinity of electrical waste processing plants. Research has shown that the impact of road traffic and wearing off brake blocks, i.e. traffic anthropopression in general, has little effect on the surrounding soil in terms of antimony content. Large amounts of Pb, Zn, As and Cd were found in the soil collected in the vicinity of the heap after the processing of zinc-lead ores, the average antimony (11.31 mg kg-1) content was lower in the vicinity of the heap than in the area around the electrical and electronic waste processing plant, but still very high. Antimony in the studied soils was demobilized and associated mainly with the residual fraction.

Sex, environment, and death rate in a dementia cohort: a seven-years Bayesian survival analysis using medications data from a contaminated area in Italy.

Introduction: Studies have analyzed the effects of industrial installations on the environment and human health in Taranto, Southern Italy. Literature documented associations between different variables and dementia mortality among both women and men. The present study aims to investigate the associations between sex, environment, age, disease duration, pandemic years, anti-dementia drugs, and death rate. Methods: Data from the regional medication registry were used. All women and men with an anti-dementia medication between 2015 and 2021 were included and followed-up to 2021. Bayesian mixed effects logistic and Cox regression models with time varying exposures were fitted using integrated nested Laplace approximations and adjusting for patients and therapy characteristics. Results: A total of 7,961 person-years were observed. Variables associated with lower prevalence of acetylcholinesterase inhibitors (AChEIs) medication were male sex (OR 0.63, 95% CrI 0.42-0.96), age 70-79 years (OR 0.17, 95% CrI 0.06-0.47) and ≥ 80 years (OR 0.08, 95% CrI 0.03-0.23), disease duration of 2-3 years (OR 0.43, 95% CrI 0.32-0.56) and 4-6 years (OR 0.21, 95% CrI 0.13-0.33), and pandemic years 2020 (OR 0.50, 95% CrI 0.37-0.67) and 2021 (OR 0.47, 95% CrI 0.33-0.65). Variables associated with higher mortality were male sex (HR 2.14, 95% CrI 1.75-2.62), residence in the contaminated site of national interest (SIN) (HR 1.25, 95% CrI 1.02-1.53), age ≥ 80 years (HR 6.06, 95% CrI 1.94-18.95), disease duration of 1 year (HR 1.50, 95% CrI 1.12-2.01), 2-3 years (HR 1.90, 95% CrI 1.45-2.48) and 4-6 years (HR 2.21, 95% CrI 1.60-3.07), and pandemic years 2020 (HR 1.38, 95% CrI 1.06-1.80) and 2021 (HR 1.56, 95% CrI 1.21-2.02). Variables associated with lower mortality were therapy with AChEIs alone (HR 0.69, 95% CrI 0.56-0.86) and in combination with memantine (HR 0.54, 95% CrI 0.37-0.81). Discussion: Male sex, age, disease duration, and pandemic years appeared to be associated with lower AChEIs medications. Male sex, residence in the SIN of Taranto, age, disease duration, and pandemic years seemed to be associated with an increased death rate, while AChEIs medication seemed to be associated with improved survival rate.

Assessment of heavy metal contamination in leafy vegetables: implications for public health and regulatory measures.

Heavy metal contamination in leafy vegetables poses significant health risks, highlighting the urgent need for stringent monitoring and intervention measures to ensure food safety and mitigate potential adverse effects on public health. This study investigates the levels of heavy metals, including cadmium (Cd), chromium (Cr), nickel (Ni), lead (Pb), zinc (Zn), and copper (Cu), in locally grown and commercially available leafy vegetables, comparing them to the safety limits established by WHO/FAO. The results revealed that levels of Cd, Cr, Ni, and Pb in the vegetables exceeded WHO/FAO limits, while Zn and Cu remained within permissible bounds. Marketed vegetables exhibited higher metal concentrations than those from nearby farms. For Cu (0.114-0.289 mg/kg) and Zn (0.005-0.574 mg/kg), the daily intake of metals (DIM) was below the dietary intake (DI) and upper limit (UL). Cd's DIM (0.031-0.062 mg/kg) remained below the UL but exceeded the DI. Marketed kale and mint surpassed both DI and UL limits for Ni, while local produce only exceeded the DI. All vegetables had DIM below the DI, except for mint and kale. For Pb, every vegetable exceeded DI limits, with market samples contributing significantly. Cr's DIM ranged from 0.028 to 1.335 mg/kg, for which no set maximum daily intake exists. The health risk index (HRI) values for Zn, Cd, Cu, Ni, and Pb suggested potential health risks associated with leafy greens, while Cr's HRI was below 1. The study underscores the need for stringent monitoring and intervention measures to mitigate the health risks posed by heavy metal contamination in leafy vegetables. These findings suggest that consuming these leafy greens may put consumers at considerable risk for health problems related to Cd, Cu, Ni, Pb, and Zn exposure.

Comprehensive evaluation of nitrogen contamination in water ecosystems of the Miyun reservoir watershed, northern China: distribution, source apportionment and risk assessment.

Miyun Reservoir plays a vital role as a source of drinking water for Beijing, however it grapples with nitrogen contamination issues that have been poorly understood in terms of their distribution, source, and associated health risks. This study addresses this knowledge gap by employing data on nitrate nitrogen (NO3--N), chloride (Cl-), dual isotopic compositions of NO3- (δ15N-NO3- and δ18O-NO3-) data in water ecosystems, systematically exploring the distribution, source and health risk of nitrogen contaminants in Miyun reservoir watersheds. The results showed that over the past 30 years, surface water runoff has exhibited a notable decrease and periodic fluctuations due to the combined influence of climate and anthropogenic activities, while the total nitrogen (TN) concentration in aquatic ecosystems presented an annual fluctuating upward trend. The TN concentration in the wet season was predominantly elevated because a large amount of nitrogen contaminants migrated into water ecosystems through heavy rainfall or river erosion. The concentration of NO3--N, the main contaminant of the water ecosystems, showed distinct variations across different watersheds, followed as rivers over the Miyun reservoir. Moreover, NO3--N levels gradually increased from upstream to downstream in different basins. NO3--N in surface water was mainly derived from the mixture of agricultural ammonia fertilizer and sewage and manure, with a minority of samples potentially undergoing denitrification. Comparatively, the main sources of NO3--N in groundwater were soil N and sewage and manure, while the denitrification process was inactive. The carcinogenic risks caused by NO3--N in groundwater were deemed either nonexistent or minimal, while the focus should predominantly be on potential non-carcinogenic risks, particularly for infants and children. Therefore, it is crucial to perform proactive measures aimed at safeguarding water ecosystems, guided by an understanding of the distribution, sources, and associated risks of nitrogen contamination.

Toward a more realistic estimate of exposure to chromium and nickel in soils of geogenic and/or anthropogenic origin: importance of oral bioaccessibility.

To enhance risk assessment for contaminated sites, incorporating bioavailability through bioaccessibility as a corrective factor to total concentration is essential to provide a more realistic estimate of exposure. While the main in vitro tests have been validated for As, Cd, and/or Pb, their potential for assessing the bioaccessibility of additional elements remains underexplored. In this study, the physicochemical parameters, pseudototal Cr and Ni concentrations, soil phase distribution, and oral bioaccessibility of twenty-seven soil samples were analysed using both the ISO 17924 standard and a simplified test based on hydrochloric acid. The results showed wide variability in terms of the concentrations (from 31 to 21,079 mg kg-1 for Cr, and from 26 to 11,663 mg kg-1 for Ni) and generally low bioaccessibility for Cr and Ni, with levels below 20% and 30%, respectively. Bioaccessibility variability was greater for anthropogenic soils, while geogenic enriched soils exhibited low bioaccessibility. The soil parameters had an influence on bioaccessibility, but the effects depended on the soils of interest. Sequential extractions provided the most comprehensive explanation for bioaccessibility. Cr and Ni were mostly associated with the residual fraction, indicating limited bioaccessibility. Ni was distributed in all phases, whereas Cr was absent from the most mobile phase, which may explain the lower bioaccessibility of Cr compared to that of Ni. The study showed promising results for the use of the simplified test to predict Cr and Ni bioaccessibility, and its importance for more accurate human exposure evaluation and effective soil management practices.

Phytochemical-mediated regulation of aflatoxigenic fungi contamination in a shifting climate and environment.

Mycotoxin contamination poses a significant problem in developing countries, particularly in northern Pakistan's fluctuating climate. This study aimed to assess aflatoxin contamination in medicinal and condiment plants in Upper Dir (dry-temperate) and Upper Swat (moist-temperate) districts. Plant samples were collected and screened for mycotoxins (Aflatoxin-B1 and Aflatoxin-B-2). Results showed high levels of AFB-1 (11,505.42 ± 188.82) as compared to AFB-2 (846 ± 241.56). The maximum contamination of AFB-1 in Coriandrum sativum (1154.5 ± 13.43 ng to 3328 ± 9.9 ng) followed by F. vulgare (883 ± 9.89 ng to 2483 ± 8.4 ng), T. ammi (815 ± 11.31 ng to 2316 ± 7.1 ng), and C. longa (935.5 ± 2.12 ng to 2009 ± 4.2 ng) while the minimum was reported in C. cyminum (671 ± 9.91 ng to 1995 ± 5.7 ng). Antifungal tests indicated potential resistance in certain plant species (C. cyminum) while A. flavus as the most toxins contributing species due to high resistance below 80% (54.2 ± 0.55 to 79.5 ± 2.02). HPLC analysis revealed hydroxyl benzoic acid (5136 amu) as the dominant average phytochemical followed by phloroglucinol (4144.31 amu) with individual contribution of 8542.08 amu and 12,181.5 amu from C. cyaminum. The comparison of average phytochemicals revealed the maximum concentration in C. cyminum (2885.95) followed by C. longa (1892.73). The findings revealed a statistically significant and robust negative correlation (y = - 2.7239 × + 5141.9; r = - 0.8136; p < 0.05) between average mycotoxins and phytochemical concentrations. Temperature positively correlated with aflatoxin levels (p < 0.01), while humidity had a weaker correlation. Elevation showed a negative correlation (p < 0.05), while geographical factors (latitude and longitude) had mixed correlations (p < 0.05). Specific regions exhibited increasing aflatoxin trends due to climatic and geographic factors.

Spatial distribution and health risks assessment of heavy metals in e-waste dumping sites from Pakistan.

The present study focused on to determine the concentration and health risk of heavy metals (Cu, Pb, Zn, Cd, Hg, Cr) in e-waste contaminated soils collected from different provinces of Pakistan. Further, the impact of heavy metals on soil enzyme activities and microbial community was also investigated. The concentration (mg/kg) of Hg, Zn, Fe, Cu, Pb, Cd, and Cr ranged between 0-0.258, 2.284-6.587, 3.005-40.72, 8.67-36.88, 12.05-35.03, 1.03-2.43, and 33.13-60.05, respectively. The results revealed that Lahore site of Punjab province indicated more concentration of heavy metals as compared to other sites. The level of Cr at all sites whereas Hg at only two sites exceeds the World Health Organization standards (WHO) for soil. Soil enzyme activity exhibited dynamic trend among the sites. Maximum enzyme activity was observed for urease followed by phosphatase and catalase. Contamination factor (Cf), Pollution load index (PLI), and geo-accumulation index (Igeo) results showed that all the sites are highly contaminated with Cu, Cd, and Pb. Hazard index (HI) was less than 1 for children and adults suggesting non-carcinogenic health risk. Principle component analysis results depicted relation among Cr, Fr, catalase, and actinomycetes; Cd, OM, urease, and bacteria, and Pb, Cu, Zn, Hg, and phosphatase, suggesting soil enzymes and microbial community profiles were influenced by e-waste pollution. Therefore, there is a dire need to introduce sustainable e-waste recycling techniques as well as to make stringent e-waste management policies to reduce further environmental contamination.

Clinical relevance of Staphylococcus saccharolyticus detection in human samples: a retrospective cohort study.

PURPOSE: To characterize the clinical relevance of S. saccharolyticus and to identify criteria to distinguish between infection and contamination. METHODS: We retrospectively investigated clinical features of patients with S. saccharolyticus detection between June 2009 and July 2021. Based on six criteria, infection was considered likely for patients with a score from 3 to 6 points, infection was considered unlikely for patients with a score from 0 to 2 points. We performed group comparison and logistic regression to identify factors than are associated with likely infection. In addition, whole genome sequencing (WGS) of 22 isolates was performed. RESULTS: Of 93 patients in total, 44 were assigned to the group "infection likely" and 49 to the group "infection unlikely". Multiple regression analysis revealed "maximum body temperature during hospital stay" to have the strongest predictive effect on likely infection (adjusted odds ratio 4.40, 95% confidence interval 2.07-9.23). WGS revealed two different clades. Compared to isolates from clade A, isolates from clade B were more frequently associated with implanted medical devices (3/10 vs. 9/12, p = 0.046) and a shorter time to positivity (TTP) (4.5 vs. 3, p = 0.016). Both clades did neither differ significantly in terms of causing a likely infection (clade A 7/10 vs. clade B 5/12, p = 0.23) nor in median length of hospital stay (28 vs. 15.5 days, p = 0.083) and length of stay at the ICU (21 vs. 3.5 days, p = 0.14). CONCLUSION: These findings indicate that S. saccharolyticus can cause clinically relevant infections. Differentiation between infection and contamination remains challenging.