Differences and Mechanism of Waxy Corn Starch and Normal Corn Starch in the Preparation of Recrystallized Resistant Starch (RS3).

This study prepared resistant starch (RS) from waxy corn starch and normal corn starch and analyzed the effects of its molecular and microstructural characteristics on RS content. The RS content of waxy corn resistant starch (RS-WCS) was highest at 57.8%, whereas that of normal corn resistant starch (RS-NCS) was 41.46%. The short-chain amylose contents of RS-WCS and RS-NCS were 47.08% and 37.24%, respectively, proportional to their RS content. Additionally, RS content positively correlated with crystallinity, short-range order degree, and degree of polymerization (DP), exceeding 25. Electron microscopic images, before and after enzymolysis, revealed that RS-WCS was hydrolyzed from the surface to the center by pancreatic α-amylase, while RS-NCS underwent simultaneous hydrolysis at the surface and center. These results indicate that the higher RS content in RS-WCS, compared to RS-NCS, is attributable to the synergistic effects of molecular structure and microstructure.

Effect of Glycerol and Sisal Nanofiber Content on the Tensile Properties of Corn Starch/Sisal Nanofiber Films.

Currently, petroleum-derived plastics are widely used despite the disadvantage of their long degradation time. Natural polymers, however, can be used as alternatives to overcome this obstacle, particularly cornstarch. The tensile properties of cornstarch films can be improved by adding plant-derived nanofibers. Sisal (Agave sisalana), a very common low-cost species in Brazil, can be used to obtain plant nanofibers. The goal of this study was to obtain sisal nanofibers using low concentrations of sulfuric acid to produce thermoplastic starch nanocomposite films. The films were produced by a casting technique using commercial corn starch, glycerol, and sisal nanofibers, accomplished by acid hydrolysis. The effects of glycerol and sisal nanofiber content on the tensile mechanical properties of the nanocomposites were investigated. Transmission electron microscopy findings demonstrated that the lowest concentration of sulfuric acid produced fibers with nanometric dimensions related to the concentrations used. X-ray diffraction revealed that the untreated fibers and fibers subjected to acid hydrolysis exhibited a crystallinity index of 61.06 and 84.44%, respectively. When the glycerol and nanofiber contents were 28 and 1%, respectively, the tensile stress and elongation were 8.02 MPa and 3.4%. In general, nanocomposites reinforced with sisal nanofibers showed lower tensile stress and higher elongation than matrices without nanofibers did. These results were attributed to the inefficient dispersion of the nanofibers in the polymer matrix. Our findings demonstrate the potential of corn starch nanocomposite films in the packaging industry.

Novel strategy for optimizing of corn starch-based ink food 3D printing process: Printability prediction based on BP-ANN model.

Although starch has been intensively studied as a raw material for 3D printing, the relationship between several important process parameters in the preparation of starch gels and the printing results is unclear. In this study, the relationship between different processing conditions and the gel printing performance of corn starch was evaluated by printing tests, rheological tests and low-field nuclear magnetic resonance (LF-NMR) tests, and a back-propagation artificial neural network (BP-ANN) model for predicting gel printing performance was developed. The results revealed that starch gels exhibited favorable printing performance when the gelatinization temperature ranged from 75 °C to 85 °C, and the starch content was maintained between 15 % and 20 %. The R2adj of the BP-ANN models were all reached 0.894, which indicated good predictive ability. The results of the study not only provide theoretical support for the application of corn starch gels in 3D food printing, but also present a novel approach for predicting the printing performance of related materials. This method contributes to the optimization of printing parameters, thereby enhancing printing efficiency and quality.

Insight into the mechanism of digestibility inhibition by interaction between corn starch with different gelatinization degree and water extractable arabinoxylan.

On the basis of revealing the interaction mechanism between corn starch (CS) and water-extractable arabinoxylan (WEAX) with high/low molecular weight (H-WEAX, L-WEAX), the degree of gelatinization (DG) on structural behaviors and in vitro digestibility of CS-WEAX complexes (CS/H, CS/L) was evaluated. With the increased DG from 50 % to 95 %, the water adsorption capacity of CS/L was increased 64 %, 58 %, 47 %, which were higher than that of CS/H (39 %, 54 %, 33 %). The gelatinization of starch was inhibited by WEAX, resulting in the enhancement of crystallinity, short-range ordered structure and molecular size of CS-WEAX complexes. Stronger interaction was detected in CS/L than with CS/H as proved by the increased hydrogen bonds and electrostatic force. Complexes exhibited higher resistant starch content (RS) at diverse DG, especially for CS/L. Notability, RS content of samples with 50 % DG were increased from 27.72 % to 32.89 % (CS/H), 36.96 % (CS/L). Except for the reduction of gelatinization degree by adding WEAX, the other possible mechanisms of retarding digestibility were explained as the small steric hindrance of L-WEAX promoted encapsulation of starch granules, limiting enzyme accessibility. Additionally, the fragmentation of CS granules with high DG promoted the movement of H-WEAX, reducing the difference in digestibility compared to CS/L.

Effect of ultrasound/CaCl2 co-treatment on the microstructure, gelatinization, and film-forming properties of high amylose corn starch.

The effect of ultrasound/CaCl2 co-treatment on aggregation structure, thermal stability, rheological, and film properties of high amylose corn starch (HACS) was investigated. The scanning electron microscopy (SEM) images revealed the number of starch fragments and malformed starch granules increased after co-treatment. The differential scanning calorimetry (DSC) results showed the co-treated HACS got a lower gelatinization temperature (92.65 ±â€¯0.495 °C) and enthalpy values (ΔH, 4.14 ±â€¯0.192 J/g). The optical microscope images indicated that lesser Maltase crosses were observed in co-treated HACS. The results of X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) indicated ultrasound influenced the compactness of amorphous zone and CaCl2 damaged the crystalline region of HACS granules. Additionally, the rheology properties of HACS dispersion demonstrated the apparent viscosity of co-treated dispersion increased as the ultrasound time prolonged. The mechanical strength and structural compactness of HACS films were improved after ultrasound treatment. The mechanism of ultrasound/CaCl2 co-treatment improved the gelatinization and film-forming ability of HACS was that (i) ultrasound wave loosened the HACS granules shell, promoted the treatment of CaCl2 on HACS granules, and (ii) ultrasound wave improved the uniform distribution of HACS dispersion, increased the interaction between CaCl2 and starch chains during the process of film-forming.

Effects of adding proteins from different sources during heat-moisture treatment on corn starch structure, physicochemical and in vitro digestibility.

Proteins impact starch digestion, but the specific mechanism under heat-moisture treatment remains unclear. This study examined how proteins from various sources-white kidney bean, soybean, casein, whey-altered corn starch's structure, physicochemical properties, and digestibility during heat-moisture treatment (HMT). HMT and protein addition could significantly reduce starch's digestibility. The kidney bean protein-starch complex under HMT had the highest resistant starch at 19.74 %. Most proteins effectively inhibit α-amylase, with kidney bean being the most significantly (IC50 = 1.712 ± 0.085 mg/mL). HMT makes starch obtain a more rigid structure, limits its swelling ability, and reduces paste viscosity and amylose leaching. At the same time, proteins also improve starch's short-range order, acting as a physical barrier to digestion. Rheological and low-field NMR analyses revealed that protein enhanced the complexes' shear stability and water-binding capacity. These findings enrich the understanding of how proteins from different sources affect starch digestion under HMT, aiding the creation of nutritious, hypoglycemic foods.

Enhancing mechanical and water barrier properties of starch film using chia mucilage.

Biodegradable packaging materials are increasingly being investigated due to rising concerns about food safety and environmental conservation. This study examines the incorporation of chia mucilage (CM) into starch-based films using the casting method, aiming to understand its effects on the structure and functionality of the films. CM, an anionic heteropolysaccharide, is hypothesized to enhance the mechanical and barrier properties of the films through polymer interactions and hydrogen bonding. Our findings confirm that CM incorporation results in films with uniformly smooth surfaces, indicating high compatibility and homogeneity within the starch matrix. Notably, CM improves film transparency and crystallinity. Mechanical assessments show a remarkable elevation in tensile strength, soaring from 5.21 MPa to 12.38 MPa, while elongation at break decreases from 61.73 % to 31.42 %, indicating a trade-off between strength and flexibility. Additionally, water solubility decreases from 57.97 % to 41.40 %, and water vapor permeability is reduced by 30 % with CM loading. These results highlight the role of CM in facilitating the formation of a dense, interconnected polymeric network within the starch matrix. Given the soluble dietary fiber nature of CM, the CS/CM (corn starch/chia mucilage) blended films are expected to be safe for food packaging and applicable as edible films with health benefits.

Insight into Rheological Properties and Structure of Native Waxy Starches: Cluster Analysis Grouping.

Recent interest in the use of waxy starches in food production is due to the possibility of replacing chemically modified starches as texture-forming agents with native starch analogues. However, there is a lack of a coherent research comparing different varieties of commercially available waxy starches with respect to their molecular and functional properties. Therefore, the objective of this study was to compare native waxy starches from potatoes, corn, and rice, with particular attention to rheological characteristics in relation to molecular structure. The investigated potato, corn, and rice starch preparations were characterized by significantly different molecular properties due to both botanical origin of starch and variety. The molecular weights of waxy starches were significantly higher than those of their normal counterparts. This phenomenon was accompanied by a more loose conformation of the waxy starch macromolecule in solution. The presence of amylose confers the ability to coagulate starch sol into gel, resulting in substantial changes in the rheological properties of starch paste, and waxy starch pastes being characterized by more viscous flow and smoother texture. Hierarchical cluster analysis indicated that differences between functional properties are more notable for normal than for waxy preparations, in which potato starch, regardless of its variety, was characterized by the most unique characteristics.

Changes in the properties of the corn starch glycerol film in a time-dependent manner during gelatinization.

This study aimed to investigate the fundamental properties, solubility, mechanical properties, barrier performance, and microstructural features of films composed of corn starch and glycerol. Changes in the microstructure were analyzed to understand how they relate to the physical and chemical properties of these films. Specifically, we found that increasing the gelatinization time decreased the film thickness, solubility, water vapor permeability, and maximum degradation temperature and increased the water content. A gradual increase in the water contact angle of the corn starch-glycerol films was observed with increasing gelatinization time. This trend is likely due to the disruptive effect of gelatinization on the crystalline and amorphous structures inherent in corn starch, resulting in reduced film crystallinity, degree of order (DO) and degree of double helix (DD).

Characteristics of corn starch/polyvinyl alcohol composite film with improved flexibility and UV shielding ability by novel approach combining chemical cross-linking and physical blending.

With the aim of effectively improving the performance of bio-friendly food packaging and circumventing the hazards associated with petroleum-based plastic food packaging, composite films of corn starch and polyvinyl alcohol were prepared using a new method that involved chemical cross-linking of glutaraldehyde and blending with cinnamon essential oil nanoemulsion (CNE). Glutaraldehyde and CNE enhance the film's network structure by chemical bonding and hydrogen bonding, respectively. This results in improved surface smoothness, mechanical properties, and UV shielding ability of the film. However, the films' surface hydrophilicity increased as a result of CNE, which is harmful for food preservation in high humidity. Overall, glutaraldehyde and CNE have a synergistic effect on some of the properties of the film which is mainly attributed to the films' structure improvement. The films have great potential for preparing flexible and UV-shielding films and offer new ideas for developing biodegradable films.

Effects of plasma-activated water combined with ultrasonic treatment of corn starch on structural, thermal, physicochemical, functional, and pasting properties.

In this study, corn starch was used as the raw material, and modified starch was prepared using a method combining plasma-activated water and ultrasound treatment (PUL). This method was compared with treatments using plasma-activated water (PAW) and ultrasound (UL) alone. The structure, thermal, physicochemical, pasting, and functional properties of the native and treated starches were evaluated. The results indicated that PAW and UL treatments did not alter the shape of the starch granules but caused some surface damage. The PUL treatment increased the starch gelatinization temperature and enthalpy (from 11.22 J/g to 13.13 J/g), as well as its relative crystallinity (increased by 0.51 %), gel hardness (increased by 16.19 %) compared to untreated starch, without inducing a crystalline transition. The PUL treatment resulted in a whitening of the samples. The dual treatment enhanced the thermal stability of the starch paste, which can be attributed to the synergistic effect between PAW and ultrasound (PAW can modify the starch structure at a molecular level, while ultrasound can further disrupt the granule weak crystalline structures, leading to improved thermal properties). Furthermore, FTIR results suggested significant changes in the functional groups related to the water-binding capacity of starch, and the order of the double-helical structure was disrupted. The findings of this study suggest that PUL treatment is a promising new green modification technique for improving the starch structure and enhancing starch properties. However, further research is needed to tailor the approach based on the specific properties of the raw material.

Interactions between corn starch and lingonberry polyphenols and their effects on starch digestion and glucose transport.

This study investigated the interaction mechanism between corn starch (CS) and lingonberry polyphenols (LBP) during starch gelatinization, focusing on their effects on starch structure and physicochemical properties. Moreover, it explored the effect of this interaction on starch digestion and glucose transport. The results indicated that LBP interacted non-covalently with CS during starch gelatinization, disrupted the short-range ordered structure of starch, decreased gelatinization enthalpy of starch, and formed a dense network structure. Furthermore, the incorporation of LBP remarkably reduced the digestibility of CS. In particular, the addition of 10 % LBP decreased the terminal digestibility (C∞) from 77.87 % to 60.43 % and increased the amount of resistant starch (RS) by 21.63 %. LBP was found to inhibit α-amylase and α-glucosidase in a mixed manner. Additionally, LBP inhibited glucose transport in Caco-2 cells following starch digestion. When 10 % LBP was added, there was a 34.17 % decrease in glucose transport compared with starch digestion without LBP. This study helps establish the foundation for the development of LBP-containing starch or starch-based healthy foods and provides new insights into the mechanism by which LBP lowers blood glucose.

Jute fibre reinforced biodegradable composites using starch as a biological macromolecule: Fabrication and performance evaluation.

The aim of this study is to develop environment friendly packaging and life style materials for replacing conventionally explored hazardous synthetic materials. The study carried out by using raw jute fibre reinforced thermoplastic corn starch (TPCS) is to develop biodegradable flexible composite materials. Flexible composites are prepared by maintaining with different fibre content (30 %, 40 % and 50 wt%). A thin coating of polyurethane based formulation is applied on one side of the developed composite to make it water resistant. Composite samples are examined in terms of their tensile properties, tear resistance, folding endurance, water absorbency, capillary action etc. The results show that flexible composites, having 50 % fibre content have tensile strength of 12.8 MPa and 12 MPa at cross and machine direction respectively compared to 3.1 MPa for the TPCS film. The Water drop test on the coated side of the developed material concluded that there is no water penetration even after 60 min of wetting. The interaction between two hydrophilic components is established with FTIR analysis. The XRD analysis was carried out to find the crystallinity of TPCS, Jute fibre and composite samples. Surface morphology and fibre/matrix interaction is observed by SEM. The detail chemical mechanism involved of fibre matrix interaction also been postulated. The scientific finding shows that the developed flexible material can be suitable for making packaging and life style items.

Efficacy of Raw Corn Starch in Insulinoma-Related Hypoglycemia: A Promising Supportive Therapy.

Objective To investigate the efficacy of raw corn starch (RCS) in clinical management of insulinoma-induced hypoglycemia. Methods We retrospectively collected clinical data of insulinoma patients who received RCS-supplemented diet preoperatively, and analyzed the therapeutic effects of the RCS intervention on blood glucose control, weight change, and its adverse events. Results The study population consisted of 24 cases of insulinoma patients, 7 males and 17 females, aged 46.08±14.15 years. Before RCS-supplemented diet, all patients had frequent hypoglycemic episodes (2.51±3.88 times/week), concurrent with neuroglycopenia (in 83.3% of patients) and autonomic manifestations (in 75.0% of patients), with the median fasting blood glucose (FBG) of 2.70 (interquartile range [IQR]: 2.50-2.90) mmol/L. The patients' weight increased by 0.38 (IQR: 0.05-0.65) kg per month, with 8 (33.3%) cases developing overweight and 7 (29.2%) cases developing obesity. All patients maintained the RCS-supplemented diet until they underwent tumor resection (23 cases) and transarterial chemoembolization for liver metastases (1 case). For 19 patients receiving RCS throughout the day, the median FBG within one week of nutritional management was 4.30 (IQR: 3.30-5.70) mmol/L, which was a significant increase compared to pre-nutritional level [2.25 (IQR: 1.60-2.90) mmol/L; P < 0.001]. Of them, 10 patients receiving RCS throughout the day for over four weeks had sustained improvement in FBG compared to pre-treatment [3.20 (IQR: 2.60-3.95) mmol/L vs. 2.15 (IQR: 1.83-2.33) mmol/L; P < 0.001). Five patients who received RCS only at night also had a significant increase in FBG within one week of nutritional management [3.50 (IQR: 2.50-3.65) mmol/L vs. 2.20 (IQR:1.80-2.60) mmol/L; P < 0.001], but only one patient who continued to receive RCS for over four weeks did not have a significant improvement in FBG. No improvement in weight gain was observed upon RCS supplementation. Mild diarrhea (2 cases) and flatulence (1 case) occurred, and were relieved by reduction of RCS dose. Conclusion The RCS-supplemented diet is effective in controlling insulinoma-induced hypoglycemia.

Preparation and characterization on the eco-friendly corn starch based adhesive of with salient water resistance, mildew resistance.

Starch adhesive is a commonly used bonding glue that is sustainable, formaldehyde-free and biodegradable. However, there are obviously some problems related to its high viscosity, poor water and mildew resistance. Hence, exploring a starch-based adhesive with good properties that satisfies the requirements of wood processing presents the context of the current research. Thus, corn starch was used as raw material to form oxidized starch (OCS) via oxidation using sodium periodate, it was reacted with a synthesis polyurea compound that prepared from hexanediamine-urea (HU) obtained by deamination to yield a oxidized starch-hexanediamine-urea adhesive (denoted hereafter as OCSHU). The oxidation process was optimized in terms of oxidant concentration, reaction time and temperature. Furthermore, the impact of HU addition on the mechanical properties of the adhesive was explored. Results indicate adhesive exhibited outstanding shear strength, when 13 % of NaIO4 was used as an oxidant to treat starch at 55 °C for 24 h, and involved in a subsequent reaction with 40 % of HU. The dry shear strength, 24 h cold water strength, 3 h hot water strength and 3 h boiling water strength are 1.84, 1.50, 1.32, and 1.31 MPa. Meantime, OCSHU adhesive solution revealed good storage stability whereas cured resin exhibited mildew resistance. The developed adhesive is a simple and green biomass wood adhesive.

Enhancing starch functionality through synergistic modification via sequential treatments with cold plasma and electron beam irradiation.

The impact of dual sequential modifications using radio-frequency (RF) plasma and electron beam irradiation (EBI) on starch properties was investigated and compared with single treatments within an irradiation dose range of 5-20 kGy. Regardless of sequence, dual treatments synergistically affected starch properties, increasing acidity, solubility, and paste clarity, while decreasing rheological features with increasing irradiation dose. The molecular weight distribution was also synergistically influenced. Amylopectin distribution broadened particularly below 10 kGy. Amylose narrowed its distribution across all irradiation doses. This was due to dominating EBI-induced degradation and molecular rearrangements from RF plasma. With the highest average radiation-chemical yield (G) and degradation rate constant (k) of (2.12 ± 0.14) × 10-6 mol·J-1 and (3.43 ± 0.23) × 10-4 kGy-1, respectively, upon RF plasma pre-treatment, amylose underwent random chain scission. In comparison to single treatments, dual modification caused minor alterations in spectral characteristics and crystal short-range order structure, along with increased granule aggregation and surface irregularities. The synergistic effect was dose-dependent, significant up to 10 kGy, irrespective of treatment sequence. The highest synergistic ratio was observed when RF plasma preceded irradiation, demonstrating the superior efficiency of plasma pre-treatment in combination with EBI. This synergy has the potential to lower costs and extend starch's technological uses by enhancing radiation sensitivity and reducing the irradiation dose.

Insight into the multi-scale structure and retrogradation of corn starch by partial gelatinization synergizing with epicatechin/epigallocatechin gallate.

Starch retrogradation is of great importance to the quality of starch-based food. This study investigated the effect of partial gelatinization (PG) synergizing with polyphenol (epicatechin, EC; epigallocatechin gallate, EGCG) on the multi-scale structure and short/long-term retrogradation of corn starch (CS). The PG synergizing with EC/EGCG substantially suppressed the short/long-term retrogradation properties of CS. These could be confirmed by the decreased storage modulus and viscosity, the relative crystallinity (1.54%, 3.56%), and the retrogradation degree (9.99%, 20.18%) of CS during storage for 1, 14 days after PG synergizing with EGCG and EC, respectively. This is because PG treatment promoted the hydrogen bond interaction between disordered starch molecules and EC/EGCG. These were proven by the larger aggregation, more and brighter fluorescents, and the reduced long/short-range order structures in CS after PG synergizing with EC/EGCG. This study is helpful for the development of foods with enhanced nutrition and low-retrogradation.

Glass bead system to study mycotoxin production of Aspergillus spp. on corn and rice starches.

Mycotoxin production by aflatoxin B1 (AFB1) -producing Aspergillus flavus Zt41 and sterigmatocystin (ST) -hyperproducer Aspergillus creber 2663 mold strains on corn and rice starch, both of high purity and nearly identical amylose-amylopectin composition, as the only source of carbon, was studied. Scanning electron microscopy revealed average starch particle sizes of 4.54 ± 0.635 µm and 10.9 ± 2.78 µm, corresponding to surface area to volume ratios of 127 1/µm for rice starch and 0.49 1/µm for corn starch. Thus, a 2.5-fold difference in particle size correlated to a larger, 259-fold difference in surface area. To allow starch, a water-absorbing powder, to be used as a sole food source for Aspergillus strains, a special glass bead system was applied. AFB1 production of A. flavus Zt41 was determined to be 437.6 ± 128.4 ng/g and 90.0 ± 44.8 ng/g on rice and corn starch, respectively, while corresponding ST production levels by A. creber 2663 were 72.8 ± 10.0 µg/g and 26.8 ± 11.6 µg/g, indicating 3-fivefold higher mycotoxin levels on rice starch than on corn starch as sole carbon and energy sources. KEY POINTS: • A glass bead system ensuring the flow of air when studying powders was developed. • AFB1 and ST production of A. flavus and A. creber on rice and corn starches were studied. • 3-fivefold higher mycotoxin levels on rice starch than on corn starch were detected.

Effect of polyphenols from Ascophyllum nodosum seaweeds on the rheology and digestion of corn starch gels and gluten-free bread features.

The main objective of this work is to study the effect of polyphenols, from the brown seaweed Ascophyllum nodosum, on the structure and digestion behaviour of gels at two corn starch concentrations (1.95 and 5.00% w/w) as well as the structure, color and texture features of crumbs from gluten-free breads. Adsorption isotherms of polyphenols on native and gelled starches were carried out and modelled by means of Langmuir and Henry models, respectively. The formation and characteristics of tested gels were rheologically monitored by means of heating ramp, time sweep at high temperature, cooling ramp and frequency sweep at 25 °C. Elastic modulus values decreased with the presence of polyphenols. Additionally, the polyphenols significantly decreased the digestion rate, measured by both chemical and rheological procedures, and the final concentration of digested starch. Finally, the presence of polyphenols in breads increased the hardness and chewiness values and decreased the cohesiveness and resilience values as well as the crumb hardening during storage.

Coumarin-Modified Starch Fluorescent Nanoparticles as Sensor of Fe3+ and Zn2+ ions Utilizing Dynamic Quenching and Chelation Mechanisms.

Zinc and iron are two essential trace minerals that play a pivotal role in maintaining optimal health and well-being in the human body. Despite being required in relatively small quantities, their significance can be understated as they participate in a wide array of critical physiological processes such as oxygen transport, DNA synthesis, controlling nutrient availability, etc. Understanding the distribution and behavior of these ions in natural water bodies is essential for assessing water quality, studying ecological processes, and managing environmental impacts. In this study, we have developed a dual fluorescence probe using starch which was functionalized with coumarin derivatives, for efficient detection of Fe3+ and Zn2+ ions. This structure led a self-assembled starch/coumarin (SC) fluorescent nanoparticles with strong fluorescence intensity under ultraviolet light (365 nm). The quenching effect of Fe3+ on the SC fluorescent probe enabled efficient specific detection of Fe3+. Furthermore, Zn2+ ions increased fluorescence intensity of coumarin compounds (λemission = 459). This phenomenon occurs when the coumarin compound forms a complex or interacts with the zinc ion, resulting in enhanced fluorescence emission. In summary, the developed fluorescent probe offered a promising approach for sensitive and specific detection of iron and zinc ions in aqueous solutions.