Corneal biomechanical properties and potential influencing factors in varying degrees of myopia.

To compare the corneal biomechanical parameters measured by Corvis ST in subjects with varying degrees of myopia. And the factors that may affect corneal biomechanical properties were also investigated. Participants in this prospective cross-sectional study were classified into three groups according to spherical equivalent (SE) and axial length (AL): Non-myopia (NM, SE > - 0.50 D and AL < 26 mm), Mild-to-moderate myopia (MM, - 6.00 D < SE ≤ - 0.50 D and AL < 26 mm), high myopia (HM, SE ≤ - 6.00 D or AL ≥ 26 mm). Ten corneal biomechanical parameters were finally included. Linear mixed-effects model accounting for using both eyes in the same participant was carried out to evaluate how the corneal biomechanical parameter was influenced by varying degrees of myopia after adjusting for biomechanically corrected intraocular pressure (bIOP) and central corneal thickness (CCT). Further, multiple linear regression was performed to explore the correlation between corneal biomechanical parameter and SE, AL, bIOP or CCT. A total of 304 eyes from 224 healthy myopic subjects were recorded. There were 95 eyes with NM, 122 eyes with MM, and 87 eyes with HM. After adjusting for bIOP and CCT, eyes with high myopia showed shorter highest concavity time (HC-time, p = 0.025), greater peak distance (PD, p = 0.001), greater deflection amplitude (DA-Max, p = 0.002), smaller whole eye movement (WEM-Max, p < 0.001) and reduced stiffness parameter (SP-A1, p < 0.001). Multiple regression analysis showed that five parameters (HC-time, p < 0.001; PD, p < 0.001; DA-Max, p = 0.001; WEM-Max, p < 0.001; and SP-A1, p < 0.001) of Corvis ST were significantly correlated with AL, and one parameter (Corvis biomechanical index, p = 0.016) has significant relationship with SE. With the increase of myopia, significant changes in several corneal biomechanical parameters indicated a progressive decrease in corneal stiffness, independent of bIOP and CCT. Corneal biomechanical parameters may be predictors of scleral mechanical strength in high myopia, which has certain application value in clinical management of myopia.

Potential dynamic corneal response parameters for myopia: relationships between axial length with whole eye movement at the first and second applanations and the highest concavity.

PURPOSE: To investigate the correlation between whole eye movement (WEM) parameters measured using Corvis ST and axial length (AL) to explore whether AL affects WEMs. METHODS: This single-center, cross-sectional study included data from healthy subjects and patients preparing for refractive surgery at the Qingdao Eye Hospital of Shandong First Medical University. Data were collected from July 2021 to April 2022. We first determined the correlations of WEMs at the time of corneal first applanation (A1_WEM), highest concavity (HC_WEM), and second applanation (A2_WEM), as well as the maximum value of WEM (WEM_Max) with AL. Subsequently, we established a series of regression models to analyze the relationships between different WEM values and AL. RESULTS: AL was negatively correlated with HC_WEM, A2_WEM, and WEM_Max (r = - 0.28, - 0.23, and - 0.22, respectively; P < 0.001). The correlation between AL and A1_WEM was not significant (P = 0.77). According to the adjusted regression models, AL was negatively associated with HC_WEM (Model 2: ß = -7.39, P < 0.001) and WEM_Max (Model 4: ß = -3.52, P = 0.02), while the associations of AL with A1_WEM (Model 1: P = 0.61) and A2_WEM (Model 3: P = 0.23) were not significant. CONCLUSIONS: AL is an independent negative influencing factor for HC_WEM. WEM is a potentially useful parameter that reflects the biomechanical properties of the eye behind the cornea in myopia.

Biomechanical changes of the cornea after orbital decompression in thyroid-associated orbitopathy measured by corvis ST.

This study aims to investigate the changes in ocular biomechanical factors in patients with inactive thyroid eye disease (TED) who undergo orbital decompression surgery. This observational prospective study include 46 eyes of 31 patients with inactive TED undergoing orbital decompression at a tertiary university hospital from October 2021 to September 2023. All participants underwent a full ophthalmic examination, and a biomechanical examination was performed using corvis ST at baseline, 1 month, and 3 months postoperatively. The study participants had a mean age of 45 ± 11.6 years, and 58.1% of them were female. The second applanation time (A2T) increased from baseline to postoperative month 1 and continued to increase to postoperative month 3 (P < 0.001). The first applanation velocity (A1V), highest concavity (HC) peak distance, and pachymetry parameters also increased from postoperative month 1 to postoperative month 3 (P = 0.035, P = 0.005, and P = 0.031, respectively). The HC time increased from baseline to postoperative month 3 (P = 0.027). Other changes were statistically insignificant. The P-values were adjusted according to biomechanically corrected intraocular pressure (bIOP). Baseline Hertel significantly influenced A2 time (P < 0.001). Our findings suggest that ocular biomechanical parameters may change following decompression surgery in patients with inactive TED. Specifically, an increase in A2T, A1V, and HC peak distance suggests a decrease in corneal stiffness, although the increased HC time contradicts this. It is recommended to postpone keratorefractive or intraocular lens implantation surgeries until corneal biomechanics stabilize after decompression surgery for optimal results.

The influence of the tear film on the intraocular pressure and the corneal biomechanical properties analyzed with the Ocular Response Analyzer / La influencia de la película lagrimal sobre la presión intraocular y las propiedades biomecánicas corneales analizadas con el Analizador de Respuesta Ocular

Purpose: As ocular dryness and glaucoma are more prevalent with increasing age, understanding how the tear film affects tonometry is important. The present study aims to understand the impact that changes in the tear film have on intraocular pressure (IOP), corneal hysteresis, and corneal resistance factor measurements. Methods: Cross-sectional research was conducted and 37 patients were assessed. The tear film lipid layer and the non-invasive break-up time (NIBUT) were evaluated using the Tearscope Plus (Keeler, Windsor, UK). Dry eye symptoms were evaluated using the Ocular Surface Disease Index (OSDI) questionnaire. IOP was measured using rebound tonometry and the Ocular Response Analyzer (ORA, Reichert). Corneal biomechanical properties were measured using ORA. Results: It was found that an increase in the IOP measured with the iCare was directly correlated with the subclass that evaluated symptomatology associated with environmental factors (r = 0.414, p<0.05, Spearman). Goldmann-correlated IOP (IOPg) and Corneal-compensated IOP (IOPcc) values were statistically significantly different between the various interferometric patterns (p<0.05). It was also found that an increase in the corneal biomechanical properties measured with ORA was directly correlated with the overall scores obtained when using the OSDI and some of its subclasses. Conclusions: Tear film interferometric patterns were shown to have some impact on the IOP measured using ORA. The IOP measured with iCare seems to be related to the symptomatology obtained from OSDI. Corneal biomechanical properties were related to the OSDI total score and some of its subclasses. An increase in symptomatology was associated with an increase in the measured biomechanical properties of the cornea.(AU)

Changes in corneal biomechanics in patients with glaucoma: a systematic review and meta-analysis.

INTRODUCTION: Corneal biomechanics has been implicated in a variety of ocular diseases. The purpose of this study was to evaluate the relationship between the glaucoma and corneal biomechanical properties, and exploring the value of corneal biomechanics in the diagnosis and follow-up of glaucoma diseases. METHODS: We searched studies in PubMed, EMBASE, Web of Science and clinicaltrials.gov., as of October 8, 2022. Only English studies were included, without publication time limit. We also searched the reference lists of published reviews. This meta-analysis was conducted with random-effects models, we used mean difference(MD) to evaluate the outcome, and the heterogeneity was assessed with the I2 statistic. Subgroup analyses were performed under the appearance of high heterogeneity. We used 11 items to describe the characteristics of included studies, publication bias was performed through the Egger's test. The quality assessment were evaluated by Newcastle-Ottawa Scale(NOS) items. RESULTS: A total of 27 eligible studies were identified for data synthesis and assessment. The result of meta-analysis showed that in the comparison of included indicators, the corneal biomechanics values of glaucoma patients were statistically lower than those of normal subjects in a similar age range. The covered indicators included central corneal thickness(CCT) (MD = -8.34, 95% CI: [-11.74, -4.94]; P < 0.001), corneal hysteresis(CH)(MD = -1.54, 95% CI: [-1.88, -1.20]; P < 0.001), corneal resistance factor(CRF)( MD = -0.82, 95% CI: [-1.21, -0.44]; P < 0.001), and intraocular pressure(IOP)( corneal-compensated intraocular pressure (IOPcc): MD = 2.45, 95% CI: [1.51, 3.38]; P < 0.001); Goldmann-correlated intraocular pressure (IOPg): MD = 1.30, 95% CI: [0.41, 2.20]; P = 0.004), they all showed statistical difference. While the value of axial length(AL) did not show statistically different(MD = 0.13, 95% CI: [-0.24, 0.50]; P = 0.48). CONCLUSION: Corneal biomechanics are associated with glaucoma. The findings can be useful for the design of glaucoma screening, treatment and prognosis.

Corneal stress-strain index in myopic Indian population.

AIM: The purpose is to study the corneal stress-strain index (SSI) in myopic refractive error among Indian subjects. METHODS: A retrospective study where young myopic subjects aged between 11 and 35 years who had undergone corneal biomechanics assessment using Corvis ST between January 2017 and December 2021 were enrolled. Subjects with central corneal thickness (CCT) <500 µ, intraocular pressure (IOP) >21 mmHg, history of any systemic and ocular disease or any previous ocular surgery, high astigmatism, corneal disease such as keratoconus were excluded. Subjects with missing data or having poor quality scan were excluded. Corneal biomechanical properties and corneal SSI were assessed using Corvis ST. For statistical purposes, eyes were divided into four different groups and were analyzed using one-way ANOVA. RESULTS: Nine hundred and sixty-six myopic eyes with mean ± standard deviation age, IOP, and CCT of 26.89 ± 4.92 years, 16.94 ± 2.00 mmHg, and 540.18 ± 25.23 microns, respectively, were included. There were 311, 388, 172, and 95 eyes that were low, moderate, severe, and extreme myopic. Deformation amplitude ratio at 1 mm and 2 mm were similar across different myopic groups. A significant increase in max inverse radius, ambrosia relational thickness, biomechanically corrected IOP, integrated radius was noted with an increase in myopic refractive error. Corvis biomechanical index, corneal SSI was found to be decreased significantly with an increase in myopic refractive error. We noted a significant positive association between myopic refractive error and SSI (P < 0.001). CONCLUSION: Corneal SSI was found to be reduced in extreme myopic eyes.

Biomechanical properties measured with dynamic Scheimpflug analyzer in central serous chorioretinopathy.

PURPOSE: Recent evidence suggests that venous congestion at the vortex vein significantly contributes to the development of central serous chorioretinopathy (CSCR), and sclera is observed to be thicker in affected eyes. This study aims to investigate whether eyes with CSCR exhibit stiff corneas, measured using Corneal Visualization Scheimflug Technology (Corvis ST), which may serve as an indicator of scleral stiffness. METHODS: This retrospective case-control study comprises 52 eyes from 33 patients diagnosed with CSCR and 52 eyes from 32 normal controls without CSCR. We compared biomechanical parameters measured with Corvis ST and anterior scleral thickness measured using anterior segment swept-source optical coherence tomography between the two groups. RESULTS: Age, sex, axial length, intraocular pressure, and central corneal thickness showed no significant differences between the two groups (p > 0.05, linear mixed model). Three biomechanical parameters-peak distance, maximum deflection amplitude, and integrated inverse radius-indicated less deformability in CSCR eyes compared to control eyes. The stress-strain index (SSI), a measure of stiffness, and anterior scleral thickness (AST) at temporal and nasal points were significantly higher in the CSCR eyes. SSI and AST were not correlated, yet both were significantly and independently associated with CSCR in a multivariate logistic regression model. CONCLUSIONS: Eyes affected by CSCR have stiffer corneas, irrespective of thicker scleral thickness. This suggests that stiffer sclera may play a role in the pathogenesis of CSCR.

The influence of the tear film on the intraocular pressure and the corneal biomechanical properties analyzed with the Ocular Response Analyzer.

PURPOSE: As ocular dryness and glaucoma are more prevalent with increasing age, understanding how the tear film affects tonometry is important. The present study aims to understand the impact that changes in the tear film have on intraocular pressure (IOP), corneal hysteresis, and corneal resistance factor measurements. METHODS: Cross-sectional research was conducted and 37 patients were assessed. The tear film lipid layer and the non-invasive break-up time (NIBUT) were evaluated using the Tearscope Plus (Keeler, Windsor, UK). Dry eye symptoms were evaluated using the Ocular Surface Disease Index (OSDI) questionnaire. IOP was measured using rebound tonometry and the Ocular Response Analyzer (ORA, Reichert). Corneal biomechanical properties were measured using ORA. RESULTS: It was found that an increase in the IOP measured with the iCare was directly correlated with the subclass that evaluated symptomatology associated with environmental factors (r = 0.414, p<0.05, Spearman). Goldmann-correlated IOP (IOPg) and Corneal-compensated IOP (IOPcc) values were statistically significantly different between the various interferometric patterns (p<0.05). It was also found that an increase in the corneal biomechanical properties measured with ORA was directly correlated with the overall scores obtained when using the OSDI and some of its subclasses. CONCLUSIONS: Tear film interferometric patterns were shown to have some impact on the IOP measured using ORA. The IOP measured with iCare seems to be related to the symptomatology obtained from OSDI. Corneal biomechanical properties were related to the OSDI total score and some of its subclasses. An increase in symptomatology was associated with an increase in the measured biomechanical properties of the cornea.

The corneal biomechanical differences after wearing orthokeratology lenses and multifocal soft lenses in children: A self-control study.

BACKGROUND: To compare the changes in corneal biomechanics after orthokeratology (OK) lens and Defocus Incorporated Soft Contact (DISC) lens treatment. METHODS: Of 28 myopic children were recruited, with one eye wearing OK lens and the other eye wearing DISC lens for one year, and the data after discontinued for 4 weeks were also collected. Major outcomes were corneal biomechanics and axial length (AL) elongation. RESULTS: Throughout the follow-up period, the DISC group had longer the first applanation (A1) time, larger A1 deformation amplitude, A1 deflection length (A1 DLL), and A1 deflection amplitude than the OK group. AL elongation was less in the OK group at each visit (all P < 0.05) but faster in the OK group than in the DISC group after discontinuation (P = 0.006). Moreover, AL elongation was related to baseline A1 time, A1 velocity and whole eye movement max in the DISC group, and in the OK group, was related to the baseline the second applanation (A2) DLL, A2 delta arc length and stiffness parameter A1 (all P < 0.05). CONCLUSIONS: The cornea was more deformable after wearing DISC lens than OK lens, and corneal biomechanical parameters were associated with AL elongation. Eyes showed less AL elongation during OK lens treatment while faster AL elongation after discontinuation than DISC lens. The baseline corneal biomechanics may help to predict AL elongation in myopic control strategies.

Correlation of corneal biomechanical changes with corneal volume changes and high-order aberration changes in the early stage after small incision lent-icule extraction / 眼科新进展

Objective To observe the corneal biomechanical changes of patients in the early stage after small inci-sion lenticule extraction(SMILE),and to analyze the correlation between the corneal biomechanical changes and changes in corneal volumes and higher-order aberrations.Methods A total of 72 patients(72 eyes)with myopia or myopic astig-matism who were scheduled for SMILE in the Optometric Center of Second People's Hospital of Foshan from January to August 2021 were included.The right eye was selected for observation.Before and 3 months after the SMILE,novel corne-al biomechanical parameters,such as biomechanical intraocular pressure(bIOP),DA ratiomax(2 mm)(DA2 ratio),inte-grated radius(IR),Ambrósio's relational thickness(for evaluation of the morphology and quality of the cornea,ARTh),stiffness parameter applanation 1(SP-A1),Corvis biomechanical index(CBI)and stress-strain index(SSI),were meas-ured by the new generation of Corvis? ST.The Pentacam anterior segment analysis system was used to measure corneal bi-omechanical parameters,including corneal volume(CV3 mm,CV5 mm,CV7 mm and CV10 mm);total root mean square of whole cornea,anterior and posterior corneal surface[RMS(Cornea,CF,CB)];root mean square of high-order aberrations of total cornea,anterior and posterior corneal surface[RMS HOA(Cornea,CF,CB)].Paired t-test or Wilcoxon singed-rank test was used to compare the changes in parameters before and after SMILE.Spearman correlation analysis and partial least squares regression were used to study the correlation between changes in novel corneal biomechanical parameters with cor-neal volume changes and high-order corneal aberration changes after the SMILE.Results Three months after SMILE,the bIOP,ARTh,SP-A1 and SSI decreased significantly,while the DA2 ratio,IR and CBI increased significantly(all P＜0.05).Three months after SMILE,CV3 mm,CV5 mm,CV7 mm and CV10 mm decreased significantly(all P＜0.05).The corneal volume changes from small to large were CV3 mm,CV5 mm,CV7 mm and CV10 mm,with a maximum decrease in the outmost periphery.The RMS(Cornea,CF,CB)and RMS HOA(Cornea,CF,CB)increased significantly(all P＜0.05);compared with the changes in high-order aberration on the anterior corneal surface,the changes in higher-order aberration on the posterior corneal surface were relatively stable.Correlation analysis shows that △ARTh was positively correlated with △CV3mm and△CV5mm,and negatively correlated with △CV10mm(all P＜0.05);△bIOP was negatively correlated with △CV3mm,△CV5mm,△RMS HOA(CF)and △RMS HOA(Cornea)and positively correlated with △CV10mm(all P＜0.05);△IR was negatively correlated with △CV10 mm(P＜0.05);△SP-A1 was positively correlated with △CV10 mm(P＜0.05);△ CBI was negatively correlated with △CV3 mm and △CV5 mm,and positively correlated with △CV10mmand △RMS(CF)(all P＜0.05).Conclusion The changes in corneal biomechanical parameters occur in the early stage after SMILE,with a certain corre-lation with the corneal volume changes in different regions and high-order corneal aberration changes.

Refractive associations with corneal biomechanical properties among young adults: a population-based Corvis ST study.

PURPOSE: To assess the associations of corneal biomechanical properties as measured by the Corvis ST with refractive errors and ocular biometry in an unselected sample of young adults. METHODS: A total of 1645 healthy university students underwent corneal biomechanical parameters measurement by the Corvis ST. The refractive status of the participants was measured using an autorefractor without cycloplegia. Ocular biometric parameters were measured using the IOL Master. RESULTS: After adjusting for the effect of age, sex, biomechanical-corrected intraocular pressure and central corneal thickness, axial length was significantly associated with A1 velocity (A1v, ß = -10.47), A2 velocity (A2v, ß = 4.66), A2 deflection amplitude (A2DeflA, ß = -6.02), HC deflection amplitude (HC-DeflA, ß = 5.95), HC peak distance (HC-PD, ß = 2.57), deformation amplitude ratio max (DA Rmax, ß = -0.36), Ambrósio's relational thickness to the horizontal profile (ARTh, ß = 0.002). For axial length / corneal radius ratio, only A1v (ß = -2.01), A1 deflection amplitude (A1DeflA, ß = 2.30), HC-DeflA (ß = 1.49), HC-PD (ß = -0.21), DA Rmax (ß = 0.07), stress-strain index (SSI, ß = -0.29), ARTh (ß < 0.001) were significant associates. A1v (ß = 23.18), HC-DeflA (ß = -15.36), HC-PD (ß = 1.27), DA Rmax (ß = -0.66), SSI (ß = 3.53), ARTh (ß = -0.02) were significantly associated with spherical equivalent. CONCLUSION: Myopic eyes were more likely to have more deformable corneas and corneas in high myopia were easier to deform and were even softer compared with those in the mild/moderate myopia.

Machine learning analysis with the comprehensive index of corneal tomographic and biomechanical parameters in detecting pediatric subclinical keratoconus.

Background: Keratoconus (KC) occurs at puberty but diagnosis is focused on adults. The early diagnosis of pediatric KC can prevent its progression and improve the quality of life of patients. This study aimed to evaluate the ability of corneal tomographic and biomechanical variables through machine learning analysis to detect subclinical keratoconus (SKC) in a pediatric population. Methods: Fifty-two KC, 52 SKC, and 52 control pediatric eyes matched by age and gender were recruited in a case-control study. The corneal tomographic and biomechanical parameters were measured by professionals. A linear mixed-effects test was used to compare the differences among the three groups and a least significant difference analysis was used to conduct pairwise comparisons. The receiver operating characteristic (ROC) curve and the Delong test were used to evaluate diagnostic ability. Variables were used in a multivariate logistic regression in the machine learning analysis, using a stepwise variable selection to decrease overfitting, and comprehensive indices for detecting pediatric SKC eyes were produced in each step. Results: PE, BAD-D, and TBI had the highest area under the curve (AUC) values in identifying pediatric KC eyes, and the corresponding cutoff values were 12 µm, 2.48, and 0.6, respectively. For discriminating SKC eyes, the highest AUC (95% CI) was found in SP A1 with a value of 0.84 (0.765, 0.915), and BAD-D was the best parameter among the corneal tomographic parameters with an AUC (95% CI) value of 0.817 (0.729, 0.886). Three models were generated in the machine learning analysis, and Model 3 (y = 0.400*PE + 1.982* DA ratio max [2 mm]-0.072 * SP A1-3.245) had the highest AUC (95% CI) value, with 90.4% sensitivity and 76.9% specificity, and the cutoff value providing the best Youden index was 0.19. Conclusion: The criteria of parameters for diagnosing pediatric KC and SKC eyes were inconsistent with the adult population. Combined corneal tomographic and biomechanical parameters could enhance the early diagnosis of young patients and improve the inadequate representation of pediatric KC research.

Assessment of Keratoconus Risk in Very Asymmetric Ectasia Using Corneal Tomographic and Biomechanical Parameters.

Purpose: To investigate the relationship between corneal tomographic or biomechanical parameters and risk of keratoconus in very asymmetric ectasia (VAE). Methods: This retrospective case-control single-centre study included patients with VAE and normal controls. The VAE group had clinical ectasia in one eye and normal topography (VAE-NT) in the fellow eye; VAE-NT eyes were selected for analysis. The control group was selected from corneal refractive surgery candidates; the right eye was enrolled. Scheimpflug-based corneal tomography (Pentacam) and corneal biomechanical assessment (Corvis ST) were performed. Univariate and multivariable logistic regression were performed using Cox proportional hazards models to evaluate keratoconus-associated risk factors. A two-piecewise linear regression model was applied to examine the threshold effect of selected vital paragmeters on the risk of keratoconus according to a smoothing plot. Results: Threshold effect between tomographic integration and risk of keratoconus was observed. Discrepancy between the central corneal thickness and thinnest corneal thickness (discrepancy CCT vs TCT) greater than 5 µm, discrepancy between the apex corneal thickness and thinnest corneal thickness (discrepancy ACT vs TCT) greater than 3 µm, vector distance between CCT and TCT (distance CCT vs TCT) greater than 0.65 mm indicated a significant increased risk of keratoconus. Risk of keratoconus decreased when distance CCT vs TCT was less than 0.65 mm. Conclusion: Discrepancy CCT vs TCT, discrepancy ACT vs TCT, and distance CCT vs TCT can be used as indicators for risk assessment of early keratoconus.

Age-related variations in corneal stress-strain index in the Indian population.

Purpose: To report age-related variations in corneal stress-strain index (SSI) in healthy Indians. Methods: It was a retrospective study where healthy Indian individuals aged between 11 and 70 years who had undergone corneal biomechanics assessment using Corvis ST between January 2017 and December 2021 were enrolled. Composite corneal biomechanical parameters and corneal SSI were abstracted from Corvis ST and compared across different age groups using one-way analysis of variance (ANOVA). Also, Pearson's correlation was used to evaluate the association between age and SSI. Results: Nine hundred and thirty-six eyes of 936 patients with ages between 11 and 77 years with mean ± SD intraocular pressure (IOP) and pachymetry of 16.52 ± 2.10 mmHg and 541.13 ± 26.39 µs, respectively. Composite corneal biomechanical parameters such as deformation amplitude ratio max at 1 mm (P < 0.001) and 2 mm (P < 0.001), biomechanically corrected IOP (P = 0.004), stiffness parameter at A1 (P < 0.001, Corvis biomechanical index (P < 0.018), and SSI (P < 0.001) were found to be significantly different as a function of age group. We noted a statistically significant positive association of SSI with age (P < 0.001), spherical equivalent refractive error (P < 0.001), and IOP (P < 0.001) and a significant negative association with anterior corneal astigmatism (P < 0.001) and Anterior chamber depth (ACD) (P < 0.001). Also, SSI was positively associated with SPA1 and bIOP, whereas negatively associated with integrated radius, max inverse radius, and Max Deformation amplitude (DA) ratio at 1 mm and 2 mm. Conclusion: We noted a positive association of corneal SSI with age in normal healthy Indian eyes. This information could be helpful for future corneal biomechanical research.

[Analysis of the results of modified personalized topographically and tomographically oriented technique of ultraviolet corneal collagen crosslinking]. / Analiz rezul'tatov modifitsirovannoi personalizirovannoi topograficheski i tomograficheski orientirovannoi metodiki ul'trafioletovogo krosslinkinga rogovichnogo kollagena.

PURPOSE: The study aims to develop a modified personalized topographically and tomographically oriented technique of ultraviolet corneal collagen cross-linking (UVCXL) to affect the area of the cornea with weakest biomechanical properties as determined by mathematical modeling. MATERIAL AND METHODS: Modeling of the biomechanics of keratoconic cornea under conditions of external diagnostic action was done using COMSOL Multiphysics® software. Finite-element analysis procured 3D images of stress/deformation distribution pattern throughout the cornea. Matching these 3D images with primary topographic and tomographic Pentacam AXL maps and Corvis ST findings allowed determining localization and dimensions of impaired regions of the cornea. The acquired data helped develop the modified corneal collagen cross-linking technique, which was applied in the treatment of 36 persons (36 eyes) with degrees I and II keratoconus. RESULTS: Uncorrected and best-corrected visual acuity (UCVA and BCVA logMAR) in all patients after modified UVCXL increased after the follow-up period lasting 6-12 months by 0.2±0.19 (23%) and 0.1±0.14 (29%) (p<0.05), respectively, in comparison with preoperative values. Maximum keratometry (Kmax) decreased by 1.35±1.63% (3%; p<0.05) in all cases at 6-12 months follow-up. Improvement of corneal biomechanical strength was determined by statistically significant increase in corneal stiffness index (SP-A1) and corneal stress-strain index (SSI) measured with Pentacam AXL and Corvis ST at 6-12 months follow-up by 15.1±5.04 (18%) and 0.21±0.20 (23%) (p<0.05), respectively. Effectiveness of the developed UVCXL technique is also confirmed by the appearance of a characteristic morphological marker - «demarcation line¼ at the cross-linking site in keratoconus projection at the depth of 240±10.2 µm. CONCLUSION: The developed personalized topographically and tomographically oriented UVCXL technique provides an evident stabilizing effect on the cornea in the form of an increase in its biomechanical strength, improvement of clinical, functional indicators and safety of keratoconus treatment.

Effect of eye rubbing on corneal biomechanical properties in myopia and emmetropia.

Purpose: To investigate short-term changes in corneal biomechanical properties caused by eye rubbing in myopia and emmetropia and compare the different responses between the two groups. Methods: This was a prospective observational study of 57 eyes of 57 healthy subjects aged 45 years and younger. The participants were divided into myopia and emmetropia groups. All the subjects underwent eye rubbing by the same investigator using the same technique. Biomechanical parameters were recorded using the Corvis ST device before and after 1 min of eye rubbing. One week later, all the participants underwent the test again. Statistical methods were employed to compare the differences between the data from before and after the 1 min of eye rubbing and demonstrate the different responses of the two groups. Results: After 1 min of eye rubbing, smaller SP-A1 (p < 0.001), higher deformation and deflection amplitudes (p < 0.001, p = 0.012), higher peak distances (p < 0.001), earlier A1 times (p < 0.001), faster velocities (p < 0.001), and lower maximum inverse radii (p = 0.004) were observed. According to the automatic linear modeling analysis, the refractive states (B = -5.236, p = 0.010) and biomechanically corrected intraocular pressure (bIOP) (B = 0.196, p = 0.016) had influenced a decrease in the stiffness parameter at the first applanation (SP-A1). The central corneal thickness (CCT) had decreased only in the myopia group (p = 0.039). The change of SP-A1 in amplitude was larger in the myopia group than in the emmetropia group (p < 0.001). All the parameters returned to the baseline level 1 week later. Conclusion: Eye rubbing appears to alter corneal biomechanical properties temporarily and make the cornea softer, especially for myopic young patients.

Analysis of potential impact factors of corneal biomechanics in myopia.

PURPOSE: To investigate potential impact factors associated with corneal biomechanical properties in Chinese myopia and further to investigate quantifying corneal biomechanics in clinical work. METHODS: Three hundred fifty-five eyes from 181 healthy myopic subjects with a mean age of 25.1 ± 9.4 were recruited in this study. Each patient carried out a comprehensive ophthalmic examination, including corneal hysteresis(CH), corneal resistance factor(CRF), central corneal thickness(CCT), axial length(AL), intraocular pressure(IOP), spherical equivalence(SE) and corneal curvature (K). CH and CRF were measured with the ocular response analyzer(ORA). To analyze the corneal biomechanical characteristics of myopia patients and their association with other parameters. RESULT: The multiple linear regression analysis showed that CH was positively associated with CCT, and corneal curvature (all with P < 0.05) and negatively associated with SE and AL)(all with P < 0.05); CRF was positively correlated with CCT, corneal curvature and IOP(all with P < 0.05), but negatively correlated with SE and AL(all with P < 0.05). The CH and CRF values in children group were both higher than adults group (≥ 18 years old) (P < 0.05), but it attributed to that the CCT of children was thicker than adults. Excluding factor of CCT, there was no significant difference in CH and CRF between children group and adult group. Excluding factor of CCT, there was no significant difference in CH and CRF among different stage of age (age 18-48). CONCLUSION: The CCT played the most important role of affecting the CH and CRF. The SE, corneal curvature, AL and IOP had a certain influence on corneal biomechanics. Whether the CH and CRF values of individual patient are normal in clinical work, it should refer to the CH and CRF values corresponding CCT sectional range and SE.

Evaluation of the corneal biomechanical properties and corneal thickness in patients with Graves' orbitopathy.

PURPOSE: To evaluate the corneal biomechanical properties and central corneal thickness in patients with Graves' orbitopathy (GO). METHOD: A total of 132 eyes of 66 patients with GO and 108 eyes of 54 healthy subjects were enrolled. Eyes with GO were classified as high score clinical activity score (CAS, ≥ 3) (Group 1, n = 64) and low CAS score (< 3) (Group 2, n = 68). Corneal biomechanical parameters [corneal hysteresis (CH), corneal resistance factor (CRF)], Goldmann-correlated intraocular pressure (IOPg), and corneal-compensated IOP (IOPcc) levels were measured with Ocular Response Analyzer (ORA, Reichert Ophthalmic Instruments, Buffalo, NY) and compared between the groups. RESULTS: The mean CH values were found as 9.6 ± 1 mmHg in Group 1, 10.2 ± 0.9 mmHg in Group 2, and 11.4 ± 1.7 mmHg in the Control Group (p < 0.001). In post hoc analysis the mean CH was significantly lower in Group 1 than Group 2 and Control Group (Group 1-Group 2, p < 0.001; Group 1-Control Group, p < 0.001). The mean CRF was found as 10.5 ± 2.1 in Group 1, 10.4 ± 2.2 in Group 2, and 10.43 ± 2.0 in the Control group. There was no statistically significant difference between the groups in CRF measurements (p = 0.959). The mean IOPcc values were found as 17.1 ± 3.6 mmHg in Group 1, 15.8 ± 4.0 mmHg in Group 2 and 15.2 ± 4.1 mmHg in the Control Group. The IOPcc and IOPg measurements between all groups were statistically significant (p = 0.009, p = 0.027, respectively). CONCLUSIONS: Corneal biomechanical measurements were different in the GO patients with varying CAS scores compared to healthy individuals.

Corneal biomechanical properties in vernal keratoconjunctivitis and its subtypes: a preliminary study.

PURPOSE: To explore the corneal biomechanical properties (CBPs) of patients with vernal keratoconjunctivitis (VKC) and the discrepancies among three subtypes of VKC including palpebral, limbal, and mixed forms. METHODS: Forty eyes of 20 VKC patients and twenty eyes of ten non-VKC patients were included in this case-control study. Patients with VKC were further divided into three subtypes (six patients in Palpebral form, five patients in limbal form, and nine patients in mixed form). The CBPs of all patients were obtained from the Corneal Visualization Scheimpflug Technology (Corvis ST). RESULTS: First applanation (A1) length, Ambrosio relational thickness in horizontal (ARTh), and stiffness parameter at first applanation (SP-A1) were significantly lower in the VKC group while A1 velocity was significantly higher in the VKC group (p < 0.05), compared to the non-VKC group. Furthermore, A1 velocity presented a positive correlation with disease course (p < 0.05). In addition, VKC patients of limbal form had lower central corneal thickness (CCT), SP-A1, and higher deformation amplitude ratio (DA ratio), compared to the other two subtypes (p < 0.05). Besides, patients in limbal form had higher A1 velocity, integrated radius, and corneal biomechanical index (CBI) compared with mixed form, and lower A1 length than palpebral form (p < 0.05). CONCLUSIONS: The corneas of VKC patients were softer and more protruded compared with the control group, and the property of steepness was closely related to disease course. VKC patients in limbal form were more inclined to be keratoconus than the other two subtypes due to their CBPs` discrepancies.

Analysis of corneal biomechanical properties 25 years after myopic photorefractive keratectomy.

PURPOSE: To evaluate corneal biomechanical changes using Corvis ST in patients treated with photorefractive keratectomy (PRK) 25 years ago. METHODS: In this study, 32 post-PRK and 38 normal eyes underwent Corvis ST (CST) assessments. The measured CST factors were: time of highest concavity (HC), time of applanation 1 (AT1), time of applanation 2 (AT2), length of applanation 1 (AL1), length of applanation 2 (AL2), velocity of applanation 1 (AV1), velocity of applanation 2 (AV2), deformation amplitude (DA), peak distance (PD), integrated radius (IR), Ambrosio relational thickness horizontal (ARTh), stiffness parameter at first applanation (SP-A1), DA ratio (2 mm), Belin/Ambrosio enhanced ectasia display (BAD) and corneal biomechanical index (CBI). RESULTS: The mean [± standard deviation (SD)] age was 51.4 ± 7.36 years in PRK, 51.4 ± 3.62 in control group. PRK was performed 24.69 ± 1.78 years ago. ARTh, SP-A1, AT1, AL1, and AL2 were lower in PRK. PD, AT2, DA ratio (2 mm), and IR were statistically higher in PRK (P < 0.01). In PRK and control group the mean value of CBI was 0.91 ± 0.11 and 0.50 ± 0.27 (P < 0.001), and mean value of BAD was 3.34 ± 1.53 and 1.1 ± 0.70 (P < 0.001). In PRK 71.9% of eyes were classed "high risk CBI plus diseased BAD" and 25% remained in the "high risk CBI and normal BAD" group. CONCLUSIONS: In this study, most of the post-PRK eyes which were clinically and topographically normal were classified as "high risk CBI plus diseased BAD" and had significantly worse CBI and BAD values than the control group. This leads to the conclusion that CBI and BAD alone are not appropriate to evaluate post-PRK ectasia.