Effects of printing orientation and artificial ageing on martens hardness and indentation modulus of 3D printed restorative resin materials.

BACKGROUND: Three-dimensional (3D) printing is increasingly used to fabricate dental restorations due to its enhanced precision, consistency and time and cost-saving advantages. The properties of 3D-printed resin materials can be influenced by the chosen printing orientation which can impact the mechanical characteristics of the final products. PURPOSE: The objective of this study was to evaluate the influence of printing orientation and artificial ageing on the Martens hardness (HM) and indentation modulus (EIT) of 3D-printed definitive and temporary dental restorative resins. METHODS: Disk specimens (20 mm diameter × 2 mm height) were additively manufactured in three printing orientations (0°, 45°, 90°) using five 3D-printable resins: VarseoSmile Crownplus (VCP), Crowntec (CT), Nextdent C&B MFH (ND), Dima C&B temp (DT), and GC temp print (GC). The specimens were printed using a DLP 3D-printer (ASIGA MAX UV), while LavaTM Ultimate (LU) and Telio CAD (TC) served as milled control materials. Martens hardness (HM) and indentation modulus (EIT) were tested both before and after storage in distilled water and artificial saliva for 1, 30, and 90 days at 37 °C. RESULTS: 90° printed specimens exhibited higher HM than the other orientations at certain time points, but no significant differences were observed in HM and EIT between orientations for all 3D-printed materials after 90 days of ageing in both aging media. LU milled control material exhibited the highest HM and EIT among the tested materials, while TC, the other milled control, showed similar values to the 3D printed resins. CT and VCP (definitive resins) and ND displayed higher Martens parameters compared to DT and GC (temporary resins). The hardness of the 3D-printed materials was significantly impacted by artificial ageing compared to the controls, with ND having the least hardness reduction percentage amongst all 3D-printed materials. The hardness reduction percentage in distilled water and artificial saliva was similar for all materials except for TC, where higher reduction was noted in artificial saliva. SIGNIFICANCE: The used 3D printed resins cannot yet be considered viable alternatives to milled materials intended for definitive restorations but are preferable for use as temporary restorations.

Concept of a Novel Glass Ionomer Restorative Material with Improved Mechanical Properties.

The objective of this study was to transfer the concept of ductile particle reinforcement to restorative dentistry and to introduce an innovative glass ionomer material that is based on the dispersion of PEG-PU micelles. It was hypothesized that reinforcing a conventional glass ionomer in this way increases the flexural strength and fracture toughness of the material. Flexural strength and fracture toughness tests were performed with the novel reinforced and a control glass ionomer material (DMG, Hamburg, Germany) to investigate the influence of the dispersed micelles on the mechanical performance. Transmission electron microscopy was used to identify the dispersed micelles. Fracture toughness and flexural strength were measured in a 3-point-bending setup using a universal testing machine. Before performing both tests, the specimens were stored in water at 37 °C for 23 h. The fracture toughness (MPa∙m0.5) of the novel glass ionomer material (median: 0.92, IQR: 0.89-0.94) was significantly higher than that of the control material (0.77, 0.75-0.86, p = 0.0078). Significant differences were also found in the flexural strength (MPa) between the reinforced (49.7, 45.2-57.8) and control material (41.8, 40.6-43.5, p = 0.0011). Reinforcing a conventional glass ionomer with PEG-PU micelles improved the mechanical properties and may expand clinical applicability of this material class in restorative dentistry.

Evaluation of a Method to Determine Wear Resistance of Class I Tooth Restorations during Cyclic Loading.

The aim of this study was the development of a test regime to determine the wear resistance and predict the clinical performance of conventional glass ionomer cement (GIC) restorations in Class I tooth cavities. Cavities were prepared in excised human teeth and restored using three conventional glass ionomer restorative materials: DeltaFil, Fuji IX GP and Ketac Universal. The restored teeth were mechanically and thermally stressed using a chewing simulator with a maximum number of 1,200,000 load cycles. Besides determining the number of cycles achieved, the abrasion volume after termination of the chewing simulation was calculated using µCT images. All teeth restored with DeltaFil reached 1,200,000 cycles without any restoration failure. Only 37.5% of the restorations each with Ketac Universal and Fuji IX GP were able to achieve the maximum cycle number. A significant lower abrasion volume for restorations with DeltaFil compared to Ketac Universal (p = 0.0099) and Fuji IX GP (p = 0.0005) was found. Laboratory chewing simulations are a useful tool to study basic wear mechanisms in a controlled setting with in-vivo related parameters. DeltaFil shows an improved wear resistance compared to other conventional GICs, indicating the high potential of this material for long-lasting Class I restorations.

Preparation of silica-poly(methyl methacrylate) composite with a nanoscale dual-network structure and hardness comparable to human enamel.

OBJECTIVE: This study aims to prepare an organic-inorganic composite with a nanoscale dual-network structure composed of a ceramic skeleton and infiltrated resin to mimic the mechanical properties of human enamel. METHODS: A porous silica block was obtained by sintering a green body composed of SiO2 nanoparticles and poly(vinyl alcohol) organic binder. Methyl methacrylate monomers were infiltrated into the porous silica block and thermally polymerized to form poly(methyl methacrylate) (PMMA). A monolithic SiO2-PMMA composite was obtained, and its nanoscale structure was investigated. Its mechanical properties were characterized by Vickers hardness, elastic modulus, and flexural strength tests. RESULTS: The SiO2-PMMA composite had a nanoscale dual-network structure composed of a silica-ceramic skeleton with PMMA-filled continuous 10-20 nm sized pores. The mechanical properties of the composite depended on the SiO2 content, which could be adjusted by modifying sintering time of the porous silica block. The mechanical properties of the composite exhibited wide variations with Vickers hardness values of 54-756, elastic moduli of 7-54 GPa, and flexural strengths of 75-120 MPa. SIGNIFICANCE: The preparation of a SiO2-PMMA composite with a dual-network structure at the nanoscale was demonstrated, and the composite was characterized with respect to its hardness compatibility with human enamel.

Data on changes in flexural strength and elastic modulus of dental CAD/CAM composites after deterioration tests.

Mechanical properties of dental restorative materials are important for clinical success in prosthodontic care. However, open data on the mechanical properties of these materials are limited. This article provides data on the flexural strength and elastic modulus of dental composites in practical use for design/computer-aided manufacturing (CAD/CAM) systems. Eight brands of composites were subjected to deterioration tests: immersing in water at 37 °C for one day or seven days, or thermocycling (TC) in water at temperatures between 5 °C and 55 °C for 5000 or 10,000 cycles. The mechanical properties of the samples were measured by using a three-point bending test according to ISO 6872. The obtained values were statistically analyzed using one-way analysis of variance (ANOVA), followed by Tukey multiple comparison tests.

Influence of Dental Prosthesis and Restorative Materials Interface on Oral Biofilms.

Oral biofilms attach onto both teeth surfaces and dental material surfaces in oral cavities. In the meantime, oral biofilms are not only the pathogenesis of dental caries and periodontitis, but also secondary caries and peri-implantitis, which would lead to the failure of clinical treatments. The material surfaces exposed to oral conditions can influence pellicle coating, initial bacterial adhesion, and biofilm formation, due to their specific physical and chemical characteristics. To define the effect of physical and chemical characteristics of dental prosthesis and restorative material on oral biofilms, we discuss resin-based composites, glass ionomer cements, amalgams, dental alloys, ceramic, and dental implant material surface properties. In conclusion, each particular chemical composition (organic matrix, inorganic filler, fluoride, and various metallic ions) can enhance or inhibit biofilm formation. Irregular topography and rough surfaces provide favorable interface for bacterial colonization, protecting bacteria against shear forces during their initial reversible binding and biofilm formation. Moreover, the surface free energy, hydrophobicity, and surface-coating techniques, also have a significant influence on oral biofilms. However, controversies still exist in the current research for the different methods and models applied. In addition, more in situ studies are needed to clarify the role and mechanism of each surface parameter on oral biofilm development.

In vitro dentin barrier cytotoxicity testing of some dental restorative materials.

OBJECTIVES: To investigate the cytotoxicity of four dental restorative materials in three-dimensional (3D) L929 cell cultures using a dentin barrier test. METHODS: The cytotoxicities of light-cured glass ionomer cement (Vitrebond), total-etching adhesive (GLUMA Bond5), and two self-etching adhesives (GLUMA Self Etch and Single Bond Universal) were evaluated. The permeabilities of human dentin disks with thicknesses of 300, 500, and 1000µm were standardized using a hydraulic device. Test materials and controls were applied to the occlusal side of human dentin disks. The 3D-cell scaffolds were placed beneath the dentin disks. After a 24-h contact with the dentin barrier test device, cell viabilities were measured by performing MTT assays. Statistical analysis was performed using the Mann-Whitney U test. RESULTS: The mean (SD) permeabilities of the 300-µm, 500-µm, and 1000-µm dentin disks were 0.626 (0.214), 0.219 (0.0387) and 0.089 (0.028) µlmin-1cm-2cm H2O-1. Vitrebond was severely cytotoxic, reducing the cell viability to 10% (300-µm disk), 17% (500µm), and 18% (1000µm). GLUMA Bond5 reduced the cell viability to 40% (300µm), 83% (500µm), and 86% (1000µm), showing moderate cytotoxicity (300-µm) and non-cytotoxicity (500-µm and 1000-µm). Single Bond Universal and GLUMA Self Etch did not significantly reduce cell viability, regardless of the dentin thicknesses, which characterized them as non-cytotoxic. CONCLUSIONS: Cytotoxicity varied with the materials tested and the thicknesses of the dentin disks. CLINICAL SIGNIFICANCE: The tested cytotoxicity of materials applied on 300-, 500-, and 1000-µm dentin disks indicates that the clinical use of the test materials (excepting self-etching adhesives) in deep cavities poses a potential risk of damage to the pulp tissues to an extent, depending on the thickness of the remaining dentin.

Wear matching performance of dental restoration materials oppositing to dentine / 实用口腔医学杂志

Objective:To compare the wear resistance between dentin and dental restoration material in vitro.Methods:The friction and wear behaviors of natural tooth dentin respectively against highly polished polymer ceramic,glass ceramic and zirconia were investigated in an artificial saliva test environment by UMT-2 friction and wear testing machine.Worn surface morphology was observed by scanning electron microscopy(SEM),roughness was measured by roughness instrument,the rigidity value was weighed by electronic balance.Results:The roughness of the 3 materials was similar to that of dentin(P ＞ 0.05),the rigidity of dentin was less than that of the 3 materials (P ＜ 0.05).After friction and wear test,the abrasion quantity of dentin respectively against the 3 materials was less than that of the materials (P ＜ 0.05).There was positive correlation between the wear loss and the hardness of the 3 materials and dentin(r =0.846).The mass loss of the dentin against Poly Ceramic after grinding abrasion was the closest among the 3 materials.Conclusion:Different materials have varying degrees abrasion against dentine.The Polymer Ceramic has closer abrasion performancez with dentin than the other 2 materials.

Effect of two fluoride varnishes on the color stability of three resin-based restorative materials: an in vitro study.

AIM: The aim of the present study was to evaluate the effect of two fluoride varnishes on color stability of three resin-based restorative materials. METHODS: Fifty-four discs (14.5 × 1.7 mm) were fabricated from A2 and A3 shades of a compomer (F2000), a flowable composite (Z350), and a hybrid composite (Z250), and incubated at 37°C for 48 h. Dura Shield (colored) and Fluor Protector (colorless) fluoride varnishes were applied onto the discs. The coating was cleaned using a low-speed handpiece and nylon bristle brush after 24 h of storage in distilled water. A second coating was then applied. A control group with no coating was immersed in distilled water and used. The CIE L*a*b* color scale was measured before the treatments and following each cleaning utilizing a spectrophotometer. RESULTS: The colored fluoride varnish exhibited the highest overall color change (∆E) after the first and the second cleaning procedures in all the materials. Among these, the greatest color change was observed in the A3 shade of F2000, followed by the A3 shade of Z-250. The ∆E was less than 3.3 in all groups, and was therefore clinically acceptable. CONCLUSION: Color changes following the application of fluoride varnishes were found to be clinically acceptable in all groups.

Synthesis and evaluation of a novel co-initiator for dentin adhesives: polymerization kinetics and leachables study.

A new tertiary amine co-initiator (TUMA) containing three methacrylate-urethane groups was synthesized for application in dentin adhesives. The photopolymerization kinetics and leaching of unreacted components from methacrylate-based dental polymers formulated with this new co-initiator were determined. The newly synthesize co-initiator showed good chemical stability and decreased amine release from the initiator system. This study provides important information for the future development of biocompatible dentin adhesives/composites.

Highly-translucent, strong and aging-resistant 3Y-TZP ceramics for dental restoration by grain boundary segregation.

Latest trends in dental restorative ceramics involve the development of full-contour 3Y-TZP ceramics which can avoid chipping of veneering porcelains. Among the challenges are the low translucency and the hydrothermal stability of 3Y-TZP ceramics. In this work, different trivalent oxides (Al2O3, Sc2O3, Nd2O3 and La2O3) were selected to dope 3Y-TZP ceramics. Results show that dopant segregation was a key factor to design hydrothermally stable and high-translucent 3Y-TZP ceramics and the cation dopant radius could be used as a controlling parameter. A large trivalent dopant, oversized as compared to Zr(4+), exhibiting strong segregation at the ZrO2 grain boundary was preferred. The introduction of 0.2 mol% La2O3 in conventional 0.1-0.25 wt.% Al2O3-doped 3Y-TZP resulted in an excellent combination of high translucency and superior hydrothermal stability, while retaining excellent mechanical properties.

Hydroxyapatite paste Ostim, without elevation of full-thickness flaps, improves alveolar healing stimulating BMP- and VEGF-mediated signal pathways: an experimental study in humans.

OBJECTIVE: Tooth extraction is considered as the starting point of jaw atrophy via osteoclast activity stimulation. The maintenance of dental alveolar bone depends on surgery procedure and use of materials to maintain prior space favoring bone regeneration. Among substitutes used in dentistry to fill bone defects, Ostim-Pastes (Ostim) is a nanocrystalline paste tested for treatment of severe clinical conditions. This research first investigated the effect of Ostim on alveolar healing, comparing in the same healthy subjects, an Ostim-filled socket with a not-filled one. Moreover, it also proposed a new surgical protocol for the post-extractive socket treatment using the graft materials without elevation of full-thickness flaps. MATERIAL AND METHODS: Fourteen patients were enrolled to bilateral maxillary or mandibular extraction that was performed without elevation of full-thickness flaps. In each patient, one socket was filled using Ostim, and the other one was allowed to undergo natural healing. No suture was carried out. Clinical and biologic parameters were screened at 1, 7, and 14 days. RESULTS: Obtained results evidenced that nanocrystalline hydroxyapatite supports bone regeneration, increasing the synthesis of pro-osteogenic factors as bone morphogenetics protein (BMP)-4, BMP-7, alkaline phosphatase, and osteocalcin. Moreover, filling post-extractive socket with nanocrystalline hydroxyapatite paste leads to a complete epithelialization already at 7 days after extraction, despite the fact that the teeth were extracted without elevation of full-thickness flaps . The improved epithelialization is mediated by increased vascular endothelial growth factor (VEGF) expression. No significant change was observed in inflammatory parameters, with exception of an early and transient IL-1ß induction, that could trigger and improve alveolar healing. CONCLUSIONS: Clinical and biomolecular observations of this explorative study evidenced that nanocrystalline hydroxyapatite improves alveolar socket healing, increasing angiogenesis, epithelialization, and osteogenesis, also in absence of elevation of full-thickness flaps.

Amalgam tattoo: a cause of sinusitis?

Little attention has been paid to the toxicity of silver amalgam fillings, which have been used over the centuries in Dentistry. Amalgam particles may accidentally and/or traumatically be embedded into the submucosal tissue during placement of a restoration and perpetuate in such area. This article presents a case of amalgam tattoo and investigates whether it is related to the patient's repeated episodes of sinusitis. The patient was a 46-year-old woman with a 2 mm diameter radiopaque lesion in the right oral mucosa detected on a panoramic radiograph and presented as a black macula clinically. A complete surgical resection was carried out. The histopathological examination revealed deposits of dark-brownish pigments lining the submucosal tissue with adjacent lymphocytic inflammatory infiltrate and multinucleated giant cells phagocyting pigments. There was a negative staining for both iron and melanin. One year after lesion removal, the patient reported that the sinusitis crises had ceased after repeated episodes for years. It may be speculated that the inflammatory process related to amalgam tattoo seems to lead to a local immune response that causes sinusitis because it enhances the human leukocyte antigen DR (HLA-DR) tissue expression.

Oral streptococci growth on aging and non-aging esthetic restorations after radiotherapy

The aim of this study was to examine Streptococcus mutans biofilm growth on both aged and non-aged restorative dental resins, which were submitted to therapeutic irradiation. Sixty-four disks of an esthetic restorative material (Filtek Supreme) were divided into 2 groups: aged group (AG) and a non-aged group (NAG). Each group was subdivided into 4 subgroups: non-irradiated and irradiated with 10Gy, 35Gy, and 70Gy. The biofilms were produced by Streptococcus mutans UA159 growing on both AG and NAG surfaces. The colony-forming units per mL (CFU/mL) were evaluated by the ANOVA and the Tukey LSD tests (α=0.05). AG presented smaller amounts of CFU/mL than the NAG before irradiation and after 10Gy of irradiation (p<0.05). AG irradiated with 35 and 70Gy showed increased amount of bacterial biofilm when compared to non-irradiated and 10Gy-irradiated disks (p<0.05). The exposure to ionizing radiation at therapeutic doses promoted changes in bacterial adherence of aged dental restorative material.

O objetivo deste estudo foi avaliar a formação do biofilme de Streptococcus mutans crescido em resina restauradora envelhecida e não-envelhecida, submetidas à radiação terapêutica. Sessenta e quatro discos do material restaurador Filtek Supreme foram divididos em 2 grupos: grupo envelhecido (AG) e grupo não-envelhecido (NAG) e cada grupo foi dividido em 4 sub-grupos: não-irradiado e irradiado com 10Gy, 35Gy e 70Gy. O biofilme de S. mutans UA159 foi produzido na superfície de ambos os discos AG e NAG. As unidades formadoras de colônia/mL (UFC/mL) foram avaliadas por ANOVA e teste de Tukey (α=0,05). O grupo AG demonstrou menores quantidades de UFC/mL que o grupo NAG antes da radiação e após a radiação de 10Gy (p<0,05). Os sub-grupos AG irradiados com 35 e 70Gy demonstraram aumento na quantidade de biofilme quando comparado aos não irradiados e irradiados com 10Gy (p<0,05). A exposição à radiação ionizante nas doses terapêuticas promoveu mudanças na aderência bacteriana no material restaurador.