Dental disease in a 15th-17th centuries skeletal sample of enslaved Africans (Lagos, Portugal).

OBJECTIVE: Dental disease is frequently used as a proxy for diet and overall health of individuals of past populations. The aim of this study is to investigate dental disease in a sample of enslaved African individuals recovered from an urban dump (15th-17th centuries) in Lagos, Portugal. DESIGN: In all, 81 African individuals (>12 years old) were analysed (19 males, 49 females, and 13 of unknown sex), in a total of 2283 alveoli, 2061 teeth, and 2213 interdental septa. Analysed oral pathologies include dental caries, periodontal disease, and ante-mortem tooth loss. Dental wear was also recorded. RESULTS: Dental caries affected 52.0 % of the teeth, although only 31.9 % were cavitated lesions. In all, 96.3 % of the individuals presented at least one cariogenic lesion. Gingivitis and periodontitis were recorded in 56.7 % and 19.0 % of the septa, respectively. Only one male individual had all septal areas healthy. Ante-mortem tooth loss was recorded in 38.3 % of the individuals, in a total of 96 teeth lost (4.2 %). Regarding occlusal wear, 70.8 % of the surfaces were recorded with grades 1-3. CONCLUSIONS: The frequencies of the oral pathological conditions observed may not only reflect a cariogenic diet (rich in starches and with a high frequency of meals) but also the conditions during the maritime voyage of the first victims of the North Atlantic slave trade (xerostomia due to lack of water, sea sickness and vomiting, vitamin C deficiency, poor hygiene), and also the impact intentional dental modifications had on the dentitions.

Evaluation of wear resistance and surface properties of additively manufactured restorative dental materials.

OBJECTIVES: To evaluate the wear resistance of three additively manufactured dental crown materials (NextDent C&B MFH, Saremco print CROWNTEC and Bego VarseoSmile Crown) under two environmental conditions (dry and artificial saliva), two loads (49 N and 70 N) and two surface treatments (polished and glazed). METHODS: A total of 120 specimens were divided into 24 groups and tested for wear under two loads (49 N and 70 N), surface treatment (polished or glazed), and environment (dry or submerged in artificial saliva). All samples underwent reciprocating wear testing at 1 Hz using a wear simulator, replicating 48 months of In Vivo conditions with a stainless-steel ball as the antagonist. The coefficient of friction (CoF), surface roughness, volumetric and vertical wear loss were measured and statistically analysed. Confocal microscopy assessed the surface properties of crown materials and the antagonists. RESULTS: The NextDent material demonstrated the most homogenous wear, with relatively low vertical and volumetric loss across all groups (p < 0.004). NextDent and Bego materials performed similarly in artificial saliva regardless of the load type (p > 1.000). The CoF remained below 0.3 for all groups. All groups exhibited significant increases in surface roughness after testing, however, this did not correlate with an increase in the CoF. Confocal analysis revealed material deformities due to load and notable scratch marks on the stainless-steel antagonists. CONCLUSION: It was found that all investigated addtively manufactured materials can be suggested for provisional use. Both vertical loss and volumetric loss results should be included for material evaluation. CoF and surface roughness should be implemented into wear evaluation. CLINICAL SIGNIFICANCE: This study highlights the practical value of additively manufactured dental crown materials, particularly for provisional restorations. However, their extended use requires careful consideration of individual patient needs, emphasising the need for judicious clinical application evaluation.

Risk indicators for the severity of erosive wear in deciduous dentition of Mexican schoolchildren aged 5 to 7 years.

The objective of this work was to estimate the prevalence and severity of erosive tooth wear (ETW), and to identify risk indicators of deciduous dentition of a group of schoolchildren from public schools in Tlalnepantla de Baz, State of Mexico. A cross-sectional study was carried out in 352 schoolchildren from 5 to 7 years old. The severity of the ETW was evaluated using the Basic Erosive Wear Examination (BEWE). Risk indicators were evaluated through a survey which included food and beverage consumption, consumption habits, vitamin C consumption, gastroesophageal reflux, heartburn, belching, xerostomia, vomiting and teeth grinding. Multinomial logistic regression models were fitted. The prevalence of ETW was 99.7% (n = 351). Regarding severity, 46.6% were at a null/mild level, 27.3% moderate, and 26.1% severe. Males were more likely to present severe ETW (odds ratio (OR) = 2.23, 95% confidence interval (CI), 1.27-3.93; p = 0.005). The risk indicators for the severity of ETW were the frequent consumption of citrus fruits (OR = 2.09, 95% CI, 1.12-3.89; p = 0.021), fruit juice (OR = 1.99, 95% CI, 1.06-3.75; p = 0.033), processed beverages (OR = 2.15, 95% CI, 1.23-3.78; p = 0.008) and hot sauce (OR = 1.82, 95% CI, 1.03-3.20; p = 0.036). The prevalence of ETW in the deciduous dentition was very high (99.7%) and ~1/3 for severe ETW. The dietary factors associated with severe ETW are part of the regular consumption of Mexican school-age children, which impact their oral health condition. It is important to establish intervention strategies from the infant stage, focused on both children and their caregivers.

Root canal dentin wear during final irrigation in endodontic retreatment with passive ultrasonic irrigation and easy clean instruments.

Context: Complementary procedures have been proposed to improve the endodontic retreatments. Aim: The aim of this study was to evaluate, by microcomputed tomography (micro-CT), the dentin wear caused by passive ultrasonic irrigation (PUI) and easy clean (EC) instruments, when used for the final removal of filling material during endodontic retreatment. Methods: Thirty-six mesial roots of the lower first molars were divided into four groups (n = 9), according to the final irrigation and sealer: PUI/AH Plus, EC/AH Plus, PUI/Total Fill (TF), and EC/TF. Canal volume was evaluated, both before and after the final irrigation, by micro-CT analysis. The Kruskal-Wallis test was used to compare the volumes among groups and the paired Wilcoxon test was used to compare the volume values before and after the final irrigation within each group. Results: Both complementary cleaning procedures promoted dentin wear that was observed only when the volume was analyzed for each third of the root canal. In the apical third, both instruments showed significant wear, where the use of the EC instrument resulted in greater wear than the PUI, in teeth filled with both AH Plus and TF BC Sealers (P < 0.05). Conclusion: Both complementary cleaning procedures promoted dentin wear and must be used cautiously.

Mandible microwear texture analysis of crickets raised on diets of different abrasiveness reveals universality of diet-induced wear.

Animals have evolved diverse comminuting tools. While vertebrates possess mineralized teeth, insect mandibles often bear metal-inclusion-hardened serrated cusps. Microscopic dental enamel wear (microwear) is known to be caused by contact with ingesta. To test if insect mandible microwear is also diet-dependent, we kept newly moulted adult two-spotted crickets (Gryllus bimaculatus) for four weeks on alfalfa-based rodent pellets with and without added mineral abrasives (loess, quartz, volcanic ash). Six crickets per diet were examined after 1, 3, 7, 14, 21 and 28 days. All diets induced progressive mandible wear, affecting specific locations along the distal tooth cusps differently. The depth of furrows increased on most abrasive-containing diets until day 21, while wear mark complexity increased from day 1 to 3 and 14 to 21. After 28 days, these parameter values for large volcanic ash and large quartz diets significantly exceeded those for the control diet. These results are comparable to observations from guinea pig feeding experiments with the same diets. Cricket mandible wear was affected by all abrasives. Notably, large volcanic ash and large quartz induced the deepest, most complex lesions, akin to observations in guinea pigs. This suggests a universal wear process, supporting that microwear analyses are suitable for inferring invertebrate diets.

Investigation of the presence of Non-carious cervical lesions (NCCLs) in ancient adult skulls: analyzing data from prehistoric and historical samples through a systematic review and meta-analysis.

OBJECTIVES: Historically, the prevalence of caries has undergone significant changes, particularly increasing with the industrialization of sugar consumption. When examining ancient populations, lower caries rates are discovered, attributed in part to dietary factors. These populations consumed abrasive foods, leading to occlusal wear and reduced non-axial occlusal forces, potentially influencing Non-Carious Cervical Lesions (NCCLs). Although some attribute NCCLs to abfraction, the mechanism remains debated. This systematic review aims to evaluate the presence of NCCLs in ancient populations, shedding light on the factors contributing to their occurrence. MATERIALS AND METHODS: The present systematic review was registered on PROSPERO, and the manuscript was prepared following PRISMA guidelines. RESULTS: After the literature search and article screening, data from 6 studies were included in the meta-analysis, with only 2 reporting NCCLs in ancient skulls, encopassing 17 subjects in 805 examined skulls, suggesting their presence even before the widespread use of toothbrushes. This finding indicates a potential etiopathogenic mechanism linked to abfraction, but the cause is complex and involves abrasive and erosive factors closely tied to dietary habits. CONCLUSIONS: In summary, NCCLs were present in ancient populations, albeit with a much lower prevalence. Their occurrence cannot be solely attributed to wear mechanisms but must be connected to abrasive factors related to diet or practices with religious and cultural significance, such as the use of labrets. CLINICAL RELEVANCE: Th the knowledge of NCCLs presence in acient sculls is crucial today for better understand the associated risk factors. In this context, the analysis of ancient skulls allows us to discern the role that tooth brushing and diet played in the formation of NCCLs, over the past century.

An In Vitro Study regarding the Wear of Composite Materials Following the Use of Dental Bleaching Protocols.

Composite materials used in dental restorations are considered resistant, long-lasting and aesthetic. As the wear of restorations is an important element in long-term use, the aim of this study was to evaluate the surface condition of nanohybrid and microfilled composite resins, after being subjected to the erosive action of dental bleaching protocols. This paper reflects a comparative study between one nanofilled composite and three microfilled composites used in restorations. For each composite, three sets of samples (under the form of composite discs) were created: a control group, an "office bleach" group with discs bleached with 40% hydrogen peroxide gel, and a "home bleach" group with discs bleached with 16% carbamide peroxide gel. Wear was numerically determined as the trace and the coefficients of friction obtained using a tribometer, the ball-on-disk test method, and two balls: alumina and sapphire. For all composite groups, there were statistically significant differences between the wear corresponding to the control and bleaching groups, for both testing balls. Regarding the composite type, the largest traces were recorded for GC Gradia direct anterior, for all groups, using the alumina ball. In contrast, for the sapphire ball, 3M ESPE Filtek Z550 was characterized by the largest traces. With respect to the friction coefficients, the "office bleach" group recorded the largest values, no matter the composite or the ball type used. The 3M ESPE Valux Plus composite recorded the largest friction coefficients for the alumina ball, and 3M ESPE Filtek Z550 for the sapphire ball. Overall, the "office bleach" group was characterized by higher composite wear, compared to the "home bleach" protocol or control group. Nanofilled composite resins showed superior wear resistance to microfilled resins after undergoing a bleaching protocol.

Temporomandibular joint biomechanics and equine incisor occlusal plane maintenance.

In equine dentistry, the physiological incisor occlusal surface is visually perceived as a plane with a distinct inclination to the head's coronal plane, extending rostro-ventrally to caudo-dorsally. To better understand the formation of this inclined plane and its connection to dental wear, we investigated the hypothesis that it arises from masticatory movements and the considerable distance between mandibular articular heads and the incisor occlusal surfaces, acting as the three points of support for the mandibles. Leveraging data from a large-scale clinical study involving static and dynamic orthodontic measurements in horses, we approximated the mandibular movement range where incisor occlusion and dental wear occur. By introducing and testing a segment coordinate system, we explored possible angular deviations from the occlusal plane caused by mandibular roll and pitch rotations during two lateral mandibular movement patterns, protrusion and retrusion. Theoretical biomechanical calculations and simulations confirmed the visual perception of the incisor occlusal surface as a plane. To further examine our assumptions, we employed a simple mechanical simulator to assess incisor normal occlusion and provoked malocclusions (diagonal, smile, and frown bite) by modifying temporomandibular joint (TMJ) movement patterns. The results from clinical investigations were corroborated by both the theoretical analysis and mechanical simulations, strengthening our understanding of the biomechanical basis behind the physiological incisor occlusal plane maintenance in horses. These findings have significant implications for equine dental health and contribute to a thorough understanding of TMJ dynamics.

Lesiones cervicales no cariosas: una revisión sistemática / Non carious cervical lesions: a systematic review

Introducción: las lesiones cervicales no cariosas (NCCL, por sus siglas en inglés) son un grupo de lesiones que afectan el área cervical del órgano dental causando hipersensibilidad dentinaria y defectos estéticos. Objetivo: analizar la literatura sobre las lesiones cervicales no cariosas, su etiología, consideraciones anatómicas, características morfológicas de la lesión y tratamientos no restaurativos. Material y métodos: se realizó una búsqueda en la base de datos PubMed, utilizando las palabras clave: non-carious cervical lesions OR noncarious cervical lesions OR tooth wear OR tooth erosion OR dental abfraction OR abfraction, recopilando un total de 78 artículos. Resultados: es necesario determinar la etiología antes de seleccionar las estrategias de tratamiento para las lesiones cervicales no cariosas. Conocer los distintos tipos de tejidos que componen al órgano dentario facilita la comprensión de los factores que participan en el desarrollo de las lesiones cervicales no cariosas. Esto permite que el tratamiento se enfoque más en la causa del problema que en los síntomas. Con esto podemos modificar diversos factores de manera interceptiva, los tratamientos de terapia con láser y compuestos tópicos son una estrategia mínimamente invasiva. Conclusiones: la mejor manera de describir a las lesiones cervicales no cariosas sería como una enfermedad multifactorial. Se debe prestar especial atención en los métodos de diagnóstico, identificando cofactores que propicien el avance de la lesión, como son la fricción y la biocorrosión. Esta revisión brinda datos que asocian a los factores oclusales como una de las principales causas de una enfermedad que afecta a más de la mitad de la población adulta (AU)

Introduction: non-carious cervical lesions (NCCL) are a group of lesions that affect the cervical area of the dental organ causing dentin hypersensitivity and cosmetic defects. Objective: to know, through a systematic review, the current state of non-carious cervical lesions. Material and methods: a search was conducted in the PubMed database, using the keywords: non-carious cervical lesions OR noncarious cervical lesions OR tooth wear OR tooth erosion OR dental abfraction OR abfraction, compiling a total of 78 articles. Results: determining etiology is necessary before selecting treatment strategies for non-carious cervical lesions (NCCL). Know the different types of tissues that make up the dentary organ, facilitate the understanding of the factors involved in the development of noncarious al cervical lesions. This allows treatment to focus more on the cause of the problem than on symptoms. With this we can modify various factors in an interceptive way, laser therapy treatments and topical compounds, are a minimally invasive strategy. Conclusions: the best way to describe non-carious al cervical lesions would be as a multifactorial disease to which special attention should be paid to both diagnostic methods, identifying cofactors that promote the progression of injury, such as friction and biocorrosion. This review provides data that associates occlusal factors as one of the main causes of a disease that affects more than half of the adult population (AU)

Macroscopic dental measures in guinea pigs (Cavia porcellus) fed natural and pelleted diets of different abrasiveness: implications for wear and compensatory growth in a hypselodont species.

The drivers of dental wear and compensatory hypselodont tooth growth are of current research interest. Expanding previous macroscopic dental wear measurements based on microtomographic scans of guinea pigs (Cavia porcellus) fed natural diets, we added diet groups with different predicted drivers of dental wear and analysed how measured variables relate to each other. The teeth of guinea pigs fed either pelleted diets containing external abrasives of various shapes, sizes and percentages (n = 66) or natural whole-leaf diets (n = 36, low-phytolith lucerne or grass or high-phytolith bamboo) were evaluated. The bamboo-fed animals showed the lowest tooth height with deep dentine basins, similar to the pellet-fed animals. Deeper dentine basins generally correlated with higher occlusal surfaces, allowing the hypothesis that changes in the pressure signal due to lower basins could initiate compensatory growth and broadening of the whole tooth surface in hypselodont teeth. Macroscopic dental wear did not categorically differ between whole-leaf or pelleted diets or between diets with internal phytoliths or with external silicate abrasives. Supporting interpretations that tooth wear should be viewed as a response to the biomechanical properties of ingested feed which may or may not be aptly summarized by broad descriptors such as 'whole/pelleted' or 'natural/artificial'.

Correlation between Friction and Wear in Cylindrical Anchorages Simulated with Wear Machine and Analyzed with Scanning Probe and Electron Microscope.

This paper presents the possibilities of applying atomic force microscopy (AFM) techniques to the study of the wear of prosthetic biomaterials. In the conducted research, a zirconium oxide sphere was used as a test piece for mashing, which was moved over the surface of selected biomaterials: polyether ether ketone (PEEK) and dental gold alloy (Degulor M). The process was carried out with constant load force in an artificial saliva environment (Mucinox). An atomic force microscope with an active piezoresistive lever was used to measure wear at the nanoscale. The advantage of the proposed technology is the high resolution of observation (less than 0.5 nm) in the three-dimensional (3D) measurements in a working area of 50 × 50 × 10 µm. The results of nano wear measurements in two measurement setups are presented: zirconia sphere (Degulor M and zirconia sphere) and PEEK were examined. The wear analysis was carried out using appropriate software. Achieved results present a tendency coincident with the macroscopic parameters of materials.

A Brief History of Tooth Wear.

Historical publications that have significantly improved the understanding of tooth wear mechanisms are reviewed with a focus on descriptions of the lesions, the evolution of their classification systems, and considerations addressing the main risk factors. Surprisingly, most important advances are often the oldest. Likewise, they are currently only marginally known, which requires a major dissemination effort.

Effect of 10% Proanthocyanidin gel on demineralized organic matrix degradation: ELISA method / Efeito do gel de Proantocianidina a 10% na degradação da matriz orgânica desmineralizada: método ELISA

Objective: This study evaluated Proanthocyanidin protective effect on dentin subjected to erosion and its inhibition on degradation of the demineralized organic matrix (DOM). Material and Methods: The tested groups were: G1 - 10% Proanthocyanidin gel (test group), G2 - 1.23% NaF (positive control 1), G3 - 0.012% Chlorhexidine (positive control 2) and G4 ­ Placebo (negative control with no active compound) and two methodologies were performed: contact profilometry and ICTP ELISA method. To quantify dentin wear, profilometry was performed. Data were submitted to Analysis of Variance followed by Fisher's LSD Test. To assess the collagen degradation, ICTP ELISA method was performed. Data were submitted to the Kruskal-Wallis followed by the Dunn ́s test. Simple linear regression and Pearson Correlation test were also performed (p<0.05). Results: The profilometry showed significantly lower wear of G1 when compared to other groups and G2, G3 and G4, which did not present significant difference among them. In the ICTP ELISA analysis, G1 and G4 did not show significant differences and the same happened between G2 and G3. However, G1 and G4 had lower values of collagen degradation compared to groups G2 and G3. Data showed that degraded DOM is a significant predictor to explain the values obtained through the ICTP ELISA. Conclusions: The results allow to verify that 10% proanthocyanidin provided less tooth wear and decreased degradation of the DOM, suggesting a good ability to prevent dentin erosion. The regression analysis also suggests that contact profilometry is a good strategy to quantify dentin wear (AU)

Objetivo: Este estudo avaliou o efeito protetor da proantocianidina na dentina submetida à erosão e sua inibição na degradação da matriz orgânica desmineralizada (MOD). Material e Métodos: Os grupos testados foram: G1 - gel de Proantocianidina 10% (grupo teste), G2 - NaF 1,23% (controle positivo 1), G3 - Clorexidina 0,012% (controle positivo 2) e G4 - Placebo (controle negativo sem princípio ativo) e duas metodologias foram realizadas: perfilometria de contato e método ICTP ELISA. Para quantificar o desgaste da dentina, a perfilometria foi realizada. Os dados foram submetidos à Análise de Variância seguida do Teste LSD de Fisher. Para avaliar a degradação do colágeno, foi realizado o método ICTP ELISA. Resultados: Os dados foram submetidos ao teste de Kruskal-Wallis seguido do teste de Dunn. Regressão linear simples e teste de correlação de Pearson também foram realizados (p<0,05). A perfilometria mostrou desgaste significativamente menor do G1 quando comparado aos outros grupos e G2, G3 e G4, que não apresentaram diferença significativa entre si. Na análise ICTP ELISA, G1 e G4 não apresentaram diferenças significativas e o mesmo ocorreu entre G2 e G3. No entanto, G1 e G4 apresentaram valores menores de degradação do colágeno em relação aos grupos G2 e G3. Os dados mostraram que a MOD degradada é um preditor significativo para explicar os valores obtidos pelo ICTP ELISA. Conclusão: Os resultados permitem verificar que a proantocianidina a 10% proporcionou menor desgaste dentário e diminuição da degradação da MOD, sugerindo uma boa capacidade de prevenir a erosão dentinária. Também sugere que a perfilometria de contato é uma boa estratégia para quantificar o desgaste da dentina (AU)

Wear of dental ceramics / Desgaste das cerâmicas odontológicas

Com base no desenvolvimento da odontologia adesiva, restaurações minimamente invasivas em cerâmica são utilizadas como alternativas para restaurar um dente. As cerâmicas odontológicas são amplamente aplicadas na área odontológica principalmente devido à sua estética e resistência mecânica. Uma das propriedades da cerâmica a ser bem conhecida antes de seu uso, é a resistência ao desgaste que deve ser compatível com o comportamento de desgaste do antagonista para evitar desempenhos indesejados. Portanto, vários métodos têm sido realizados para avaliar o comportamento do desgaste dos materiais cerâmicos considerando diferentes condições presentes no complexo meio oral. Este estudo teve como objetivo compilar os métodos utilizados para investigar o desgaste das cerâmicas odontológicas e descrever os mecanismos de desgaste envolvidos nos mesmos. A obtenção e análise de dados também é abordada para discutir os resultados obtidos a partir de diferentes métodos, bem como a análise clínica do desgaste e perspectivas futuras sobre esse tema. Em conclusão, muitas metodologias estão disponíveis para medir o desgaste cerâmico. Portanto, os métodos devem ser selecionados com base na relevência clínica de cada estudo e devem seguir parâmetros previamente relatados para padronização, permitindo a comparação da literatura (AU)

Based on the development of adhesive dentistry, minimally invasive restorations in ceramics are used as alternatives to restore a tooth. Dental ceramics are largely applied in the dentistry field mainly due to their esthetic and mechanical strength. One of the ceramic properties to be well known before its use is the wear resistance that should be compatible with the antagonist wear behavior to avoid unwanted performance. Therefore, several methods have been performed to assess the ceramic materials wear behavior considering different conditions present in the complex oral medium. This study aimed to compile the methods used to investigate dental ceramics wear and to describe the wear mechanisms involved on them. Obtaining and analyzing data is also addressed to discuss the results obtained from different methods, as well as the clinical analysis of wear and future perspectives on this topic. In conclusion, many methodologies are available to measure the ceramic wear. Therefore, the methods must be selected based on the clinical significance of each study and should follow previously reported parameters for standardization, allowing literature comparison. (AU)

The ability of different formulations of artificial saliva to protect dentin from erosive wear / Ação protetora de diferentes formulações de saliva artificial no desgaste erosivo

Objective: Evaluate the protective effect of artificial saliva formulations associated or not with mucin on dentin. Materials and Methods: Bovine dentin specimens were randomly allocated to 10 groups (n = 20) according to the artificial saliva tested and the presence or absence of mucin: Amaechi et al. (1998); Klimek et al. (1982); Vieira et al. (2005) and Eisenburger et al. (2001) and deionized water (control). Samples were submitted to an erosive cycle consisting of two immersions of 120 min in the saliva, followed by 1 min in hydrochloric acid solution, and new storage in saliva for 120 min. Surface loss (µm) was measured before and after the cycle. Data were analyzed using 2-way ANOVA and Tukey's test (p < 0.05). Results: A significant difference was observed for the saliva formulation but not for the presence of mucin. The deionized water provided the highest surface loss and the Eisenburger's saliva formulation the lowest. The groups testing the Amaechi, Klimek, and Vieira saliva did not present significant differences. Conclusion: Eisenburger's saliva formulation provides a higher protective effect against dentin erosion. The presence of mucin did not increase the erosion-preventive effect of artificial saliva formulations. (AU)

Objetivo: Avaliar o efeito protetor de formulações de saliva artificial associadas ou não à mucina sobre a dentina submetida a erosão. Material e Métodos: Espécimes de dentina bovina foram alocados em 10 grupos (n = 20) de acordo com a saliva testada e a presença ou ausência de mucina: . Amaechi et al. (1998); Klimek et al. (1982); Vieira e cols. (2005), Eisenburger et al (2001) e agua deionizada (controle). As amostras foram submetidas a um ciclo erosivo composto por duas imersões de 120 min na saliva, seguidas de 1 min em solução de ácido clorídrico e novo armazenamento na saliva por 120 min. A perda de superfície (µm) foi medida antes e depois do ciclo. Os dados foram analisados usando ANOVA 2 fatores e teste de Tukey (p <0,05). Resultados: Foi observada diferença significativa para a formulação de saliva, mas não para a presença de mucina. A água deionizada proporcionou a maior perda de superfície e a formulação de saliva de Eisenburger a menor. Os grupos que testaram a saliva Amaechi, Klimek e Vieira não apresentaram diferenças significativas entre si. Conclusão: A formulação de saliva de Eisenburger fornece o maior efeito protetor contra a erosão dentinária e a presença de mucina não aumentou o efeito preventivo de erosão de formulações de saliva artificial (AU).

Exploring activity-induced dental modifications in medieval Pieve di Pava (central Italy, 10th-12th centuries AD).

OBJECTIVE: This study aims to investigate the following aspects: i) presence of activity-induced dental modifications (AIDMs) in a medieval population from Pieve di Pava (Siena, central Italy); ii) sex-specific and age-specific distribution of AIDMs in the sample; iii) potential correlations between AIDMs and the tradi tional activities and cultural habits of rural communities in medieval Italy. DESIGN: The permanent teeth of 204 individuals buried at Pieve di Pava (10th-12th centuries AD) were systematically examined in order to assess the distribution of five types of AIDM, i.e. lingual surface attrition of the maxillary anterior teeth (LSAMAT), excessive occlusal load, grooving, notching, and chipping. RESULTS: Prevalence rates of LSAMAT, excessive occlusal load and grooving were low, whereas higher frequencies were recorded for the other types of AIDMs. Prevalence was higher in the male subsample for all the modifications recorded. Overall, the frequencies of AIDMs increased with age. CONCLUSIONS: The very low prevalence of LSAMAT was thought to be connected to leatherworking in the sample under study, while excessive occlusal load was interpreted as evidence that hard materials requiring preliminary chewing and softening were not regularly processed with teeth. The unique case of interproximal grooving in an old male individual may reflect the use of a toothpick for therapeutic purpose. Conversely, the very high prevalence of notching and chipping was taken as indicative of the processing of wool fibers. The sex-specific distribution of these AIDMs suggests that males performed activities involving the use of teeth more frequently than females.

Reconstructing tooth crown heights and enamel caps: A comparative test of three existing methods with recommendations for their use.

Studies of enamel growth and thickness, whether in paleoanthropology, bioarchaeology, or primatology, require measurements of crown height (CH), cuspal enamel thickness (CET), average (AET), and/or regional enamel thickness (RegAET) on complete, unworn crowns. Yet because fully unworn crowns are uncommon, three methods to bolster sample sizes by reconstructing slightly worn teeth have been developed: Profile, Polynomial, and Pen Tool. Although these methods have been tested for accuracy, no study has yet directly compared the three methods to assess their performance across CH, CET, AET, and RegAET measurements. Moreover, it is currently unclear how accurate the methods are when reconstructing crowns with varying degrees of wear. The present study addresses this gap in our understanding of how these methods perform on four key dental measurements, evaluates the degree of wear for which accurate crown reconstructions can be completed, and offers recommendations for applying these methods. Here, the methods are compared on Paranthropus robustus mandibular molars, a sample chosen because it exhibits variable morphology, presenting a challenge for reconstruction methods. For minimally worn teeth, Profile, Polynomial, and Pen Tool methods can be employed (in that order) for all measurements except CET, which cannot be reliably measured on reconstructions. For teeth with wear that obliterates the nadir of the occlusal basin or dentin horns, CH and AET can be measured using Profile and Polynomial reconstructions; however, no other measurements or methods were reliable. Recommendations provided here will make it possible to increase sample sizes and replicability, enhancing studies of enamel thickness and growth.

Prevalence and description of dental disorders in skulls of free-living wild primates from Paraná State, Brazil.

BACKGROUND: Non-human primates can present oral diseases. However, differences among the dentition of the various species make it difficult to understand their dental features and associated diseases. This research hypothesizes that the prevalence of dental disorders varies in the species studied according to distinct types of diet. METHODS: Forty-five syncraniums of the species Alouatta caraya, Alouatta guariba clamitans, Sapajus nigritus, Callithrix jacchus, and Callithrix penicillata were evaluated by visual inspection, magnifying glasses, and on cone-beam computed tomography. RESULTS: Disorders identified consisted of missing teeth before death, agenesis, dental calculus, dental wear, dental staining, dental fracture, exposure of pulp chamber, alveolar bone resorption, tooth discoloration, and persistence of deciduous teeth. Alouatta guariba clamitans presented the most disorders. CONCLUSIONS: The results suggest that neotropical primates have a high prevalence of dental changes, even in free-living conditions, and that the differences observed among them may be associated with different diet patterns.

Natural teeth wear opposite to glazed and polished ceramic crowns: A systematic review.

It is a major concern to select a proper ceramic with acceptable strength and esthetic and minimum antagonist wear. Therefore, different ceramics were introduced to obtain these advantages with various surface treatments. The aim of this study is to evaluate and report the wear behavior of polished and glazed feldspathic and zirconia crowns in published articles up to 2020. Five electronic databases which were used in this research were MEDLINE (via PubMed), Web of Science, Cochrane Library, Embase, and Scopus from the starting date of databases to January 2020. The Keywords "zirconia," "feldspathic," "dental ceramic," "enamel," "Y-TZP," "wear," "glazed," and "polished" were used. English articles were selected in this paper. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses statement was used as a reporting template as much as possible. Among the initially 133 articles, 59 duplicated articles were removed, and finally, 52 articles were screened and among them, only 16 articles remained for full-text regaining. The results showed that zirconia had significantly less antagonist wear than feldspathic groups, and polishing had less enamel wear than other types of surface treatment like glazing. Only one study showed that glazed zirconia can have more antagonist wear than feldspathic porcelain. Monolithic zirconia had less enamel wear than conventional zirconia and low-fusing feldspathic porcelain showed lower antagonist wear in comparing with other types of feldspathic porcelains.

Early evidence of extra-masticatory dental wear in a Neolithic community at Bestansur, Iraqi Kurdistan.

This paper presents the first evidence of extra-masticatory dental wear from Neolithic Bestansur, Iraqi Kurdistan (7700-7200 BC). Bestansur is a rare, recently excavated burial site of this period in the Zagros region, of Iraqi Kurdistan. A total of 585 teeth from 38 individuals were analyzed for features indicative of activities including oblique wear planes, notches, grooves, and chipping. Indications of extra-masticatory wear were found in 27 of 38 individuals, and 277 of 585 teeth (47%) available for study. The most frequent features were chipping and notches suggesting activities such as processing fibers by using the teeth as a "third hand." Evidence for these wear features was present in both males, females, and in children aged five and older. These aspects of childhood life-course and dentition are rarely investigated. The presence of dental wear features in the deciduous dentition can indicate an age range at which activities began in different groups and highlights the importance of including juvenile remains in such studies. The variety of forms of dental wear may relate to the mixed diet and activities of these people. This study adds to our understanding of human behaviors and socio-cultural aspects of life during this transitional period.