Knowledge, attitudes, and practice related to tooth loss and dentures among patients with dental arch deficiencies.

BACKGROUND: Tooth loss is a common problem that affects many people worldwide. Exploring knowledge, attitude, and practice (KAP) among patients can identify barriers and challenges in following recommended practices, providing valuable insights for dental healthcare providers, policymakers, and researchers. This study aimed to explore the KAP of patients with dental arch deficiencies regarding tooth loss and dentures. METHODS: This web-based, cross-sectional study was conducted among patients with dental arch deficiencies using a self-designed questionnaire. RESULT: 3166 valid questionnaires were included. Participants' mean KAP scores were 6.84 ± 2.27 (possible range: 0 ~ 12), 39.4 ± 3.72 (possible range: 9 ~ 45), and 27.7 ± 4.36 (possible range: 8 ~ 40), respectively. Multivariable logistic regression analysis showed that knowledge (OR = 1.383), employed (OR = 1.805), family history (OR = 2.158), and treatment (OR = 1.683) were independently associated with attitude. Moreover, knowledge (OR = 1.239), attitude (OR = 1.250), female (OR = 0.619), age (OR = 0.967), college/bachelor (OR = 0.373), and master and above degree (OR = 0.418), employed (OR = 0.554) or student (OR = 0.434), with 10,001-20,000 Yuan household income per month (OR = 0.492), have been married (OR = 0.609), smoking (OR = 0.595), drinking (OR = 0.397), disease duration (OR = 0.972), with family history (OR = 1.676), and with treatment (OR = 3.492) were independently associated with practice (all P < 0.05). CONCLUSION: Patients with dental arch deficiencies have insufficient knowledge, positive attitudes, and moderate practice toward tooth loss and dentures, which might be affected by multiple demographic factors.

Comparison of Conventional and Digital Workflows in the Fabrication of Fixed Prostheses: A Systematic Review.

When considering dental restorations, the use of fixed partial dentures is one of the most widely accepted treatment options. In the past, fabrication was done using traditional techniques and the conventional workflow was by far the popular method; however, nowadays digital workflows are being used as a means to produce the prosthesis. This systematic review aims to compare the workflows by considering their respective qualities, such as precision, efficiency, cost-effectiveness, and clinical performance. A complete search has been carried out to incorporate any relevant studies published between the years 2012 and 2023 in databases such as Scopus, Web of Science, PubMed, ScienceDirect, and Cochrane Library. Two independent reviewers screened articles for inclusion and assessed the studies' methodological quality rating via the NIH Tool. A total of 22 relevant articles were reviewed after a systematic search strategy. The main outcome of the review was digital workflows were found to reduce working time, eliminate the selection of trays, minimize material consumption, and enhance patient comfort and acceptance. The studies also showed that digital workflows resulted in greater patient satisfaction and higher success rates than conventional workflows. Workflows for digital dentistry demonstrated to be better than traditional ones due to the cost-effectiveness, accuracy, and time optimization for the fabrication of fixed prostheses.

Retrospective clinical study of 842 clasp-retained removable partial dentures with a metal framework: survival, maintenance needs, and biologic findings.

OBJECTIVES: To evaluate clasp-retained removable partial dentures (C-RPDs) with a metal framework for survival, maintenance requirements, and biological implications. METHOD AND MATERIALS: C-RPDs were retrospectively analyzed based on patient records. Treatment failure was defined as fracture of a framework component (metal base or connector) or loss of an abutment tooth. Other outcome variables included factors that might conceivably impact C-RPD survival (maxilla vs. mandible, Kennedy classes, opposing dentitions, treatment by students vs. certified dentists), mobility and caries of abutment teeth (in relation to clasp designs), and maintenance requirements (relining, clasp or resin fractures). Differences were evaluated by appropriate statistical tests at the P ≤ .05 level. RESULTS: A total of 612 patients (339 men, 273 women) 60.0 ± 11.5 years old at delivery were included, covering 842 C-RPDs and a mean observation period of 42.1 ± 33.2 months. Kaplan-Meier C-RPD survival was 76.2% after 5 years and 49.5% after 10 years. Biological complications (i.e. loss of abutment teeth) accounted for the vast majority (95.6%) of C-RPDs failures, and Kaplan-Meier C-RPD survival was significantly better in the mandible (P = .015). Some clasp designs contributed significantly to caries and removal of abutment teeth (both P < .05). No other significant differences were noted. CONCLUSION: Tooth loss both emerges as the main cause of C-RPDs failure and might be amenable to careful selection of clasp designs. Overall, better C-RPD survival should be expected in the mandible. A non-contributory role of Kennedy classes and opposing dentitions is tentatively suggested based on numerically heterogeneous subgroups.

Systemic and Oral Characteristics of Convalescent Inpatients Requiring Oral-Health Management by a Dental Specialist during Hospitalization.

Older adults often experience poor oral functions, hindering rehabilitation post-acute disease treatment. However, characteristics of hospitalized patients who would benefit from professional oral-health management (POHM) have not been clarified. Therefore, we aimed to elucidate systemic and oral characteristics of patients requiring POHM during hospitalization in a convalescent hospital. This study included 312 participants admitted to the rehabilitation department of a convalescent hospital for a year. The patients were categorized according to POHM requirements (no-POHM group: 137 patients; POHM group: 175 patients) by discharge. Age, sex, primary disease at admission, Glasgow coma scale (GCS), Functional Independence Measurement (FIM), Mini nutritional assessment-short form (MNA-SF), Functional oral intake scale (FOIS), number of present and functional teeth, Oral Health Assessment Tool (OHAT) scores, and POHM details provided during patient hospitalization were compared. Binomial logistic-regression analysis identified patients requiring POHM as those who had suffered a stroke and had a low number of present teeth, poor overall oral health, low food form, and low motor skills at admission. A high percentage of POHM interventions comprised oral-hygiene care and denture treatment. In summary, patients whose oral health has deteriorated and those experiencing oral-intake difficulties upon admission to a convalescent hospital may require oral-health management.

The Journey of Additive Manufacturing in Prosthodontics from the Early Dawn till the Current State of Art. A Narrative Review.

Additive manufacturing (AM) also known as 3D-printing has become one of the pillars of digital technology in the dental field particularly in prosthodontics. With the burgeoning development in the already existing AM technology and the evolution of new techniques, concurrent with the development of printable biomaterials, the range of application of the technology has broadened from the construction of diagnostic models to more complex applications such as maxillofacial prosthetics and implant planning. Full understanding of the technology and the related fabrication parameters will enable the maximum benefit from such technology. Therefore, the aim of this review is to represent a road trip along which the prosthodontists and dental technicians can cast a closer look on different AM technologies, advantages and disadvantages of each technique, the application of technology in the field of Prosthodontics, areas of current research in the field and finally recommendations for areas of future investigations.

In vitro analysis of monomer leaching in modern dental materials: CAD milled, printed, traditional heat-processed, and auto-polymerizing denture base resins.

PURPOSE: Denture fabrication has shifted from traditional heat-processed and auto-polymerizing materials to computer-aided design and computer-aided manufacturing (CAD-CAM) milled and printed materials. The monomer in traditional materials can induce an allergic reaction in some patients. With the rise in the edentulous population and increasing demand for the fabrication of dentures, these newer materials should be studied for monomer leaching. The purpose of this study was to evaluate the ratio of residual monomer in materials being used for denture bases: CAD-milled polymethylmethacrylate (PMMA), printed denture base resin, heat-processed PMMA, and auto-polymerizing PMMA comparatively. MATERIALS AND METHODS: Milled, printed, heat-activated, and auto-polymerizing denture base specimens (n = 3 for each group, each test run three times) were fabricated according to manufacturer recommendations. Specimens were first immersed in deuterated chloroform (CDCl3), a deuterated organic solvent, to evaluate monomer leaching and to observe physical properties of the materials. NMR spectroscopy was used to evaluate the dissolution of materials and residual monomer to crosslinked polymer ratios at 1, 4, and 9 days. A second group of specimens was then immersed in deuterium oxide (D2O) to evaluate if the residual monomers would leach out of the system. The solution was then analyzed using nuclear magnetic resonance (NMR) spectroscopy for 1 month. The deuterated forms of chloroform (CDCl3) and water (D2O) were used to enable sample characterization by NMR. RESULTS: While the heat-processed, auto-polymerizing, and milled specimens possessed residual monomers, no significant monomer leaching was noted in the printed specimen, while immersed in CDCl3. Similarly, the printed specimen was most resistant to dissolution, as compared to the rest; dissolution of the specimen is indicative of little to no cross-linking. No detectable dissolution of monomer was seen when all specimens were immersed in D2O for up to 1 month. CONCLUSIONS: Residual monomers were not found in the printed denture material in this study in either CDCl3 or D2O, whereas CAD-milled and traditionally processed denture bases still have residual monomers within their respective systems when immersed in organic solvent. None of the specimens tested leached monomers into D2O.

Exploring lived experiences on the usage of removable complete dentures among edentulous patients attending Makerere University Dental Hospital, Kampala, Uganda.

BACKGROUND: Edentulism remains a major disability worldwide, especially among the elderly population, although the prevalence of complete edentulism has declined over the last decades. In Uganda, the prevalence of edentulism in people aged 20 years and above is 1.8%. The therapy for edentulous patients can be realized through the use of conventional removable complete dentures, implant-supported prostheses, and computer-aided design and computer-aided manufacturing (CADCAM), however, the provision of removable complete dentures continues to be the predominant rehabilitation for edentulous patients. However, no published study has explored the lived experiences with removable complete dentures among the Ugandan population. The aim of the present study was to explore patients' lived experiences on the usage of removable complete dentures among Ugandan edentulous patients attending Makerere University Dental Hospital. METHODS: This was a qualitative study approach using purposive sampling. Fifteen (15) respondents were selected across social demographics. Interviews were recorded and transcribed and themes were generated to draw a deeper meaning to the usage of removable complete dentures. A qualitative statistical package, Atlas Ti software was used to generate themes from the interviews followed by an interpretation of the generated data and the results were presented as text and in a table. RESULTS: The reported key positive experiences due to removable complete denture rehabilitation were the improvement in speech, eating ability, regaining good facial appearance, better oral hygiene management, self-esteem and confidence to smile in public, and a feeling of completeness. However, respondents complained of pain and discomfort due to the looseness of dentures, inability to eat certain foods, and regular cleaning of dentures. The respondents did not go through proper informed consent processes before getting removable complete dentures. CONCLUSION: The study found that patients were satisfied with their removable complete dentures rehabilitation due to the positive experiences registered, such as the ability to eat and talk well, and restoration of self-esteem, all of which improved their quality of life. However, they experience pain and discomfort due to the looseness of dentures.

The impact of wearing complete denture in one or both arches, on eating-related quality of life and patients' perceived need for advice to support eating well: Results from a qualitative study.

BACKGROUND: Wearing complete denture in one or both arches can impact enjoyment of eating and affect quality of life compared with being dentate. Clinicians focus on issuing technically sound dentures but ignore the impact of wearing dentures on the eating-related quality of life which affects the success of treatment. OBJECTIVES: The aim of this research was to qualitatively explore ERQoL in Australian adults wearing complete dentures using a validated questionnaire and through focus groups. METHODS: Complete denture wearers (n = 44) were recruited from dental clinics and invited to complete the self-administered Emotional and Social Issues Related to Eating questionnaire. Responses were categorised under the six questionnaire domains. A subsample of 20 participants who completed the questionnaire were invited to participate in focus groups to identify emerging themes. RESULTS: Twenty-three participants (52.3%) completed the questionnaire. Most participants expressed a decline in enjoyment of eating due to reduced ability to eat, longer chewing times and the need to frequently clean dentures while eating. Focus groups (n = 2 × 4 participants) indicated educational materials on eating with dentures would increase recognition of eating problems with dentures and reduce trial and error approaches to dealing with these. CONCLUSION: ERQoL is adversely affected by wearing complete dentures due to functional limitations, restricted food choices and adaptive eating behaviours. Patient support for eating well with a complete denture/s wearers is required.

Oral-Health-Related Quality of Life in Elderly Edentulous Patients with Full-Arch Rehabilitation Treatments: A Systematic Review.

Background: The improvement of oral-health-related quality of life (OHRQoL) with different types of prosthesis for completely edentulous jaws in the elderly population is a critical factor in clinical decision making for these vulnerable patients. This review aims to evaluate the changes in OHRQoL after treatment with different types of full-arch prostheses in the elderly edentulous population to determine the prostheses that result in the greatest improvement in OHRQoL. Materials and Methods: Clinical studies of different types of full-arch prostheses that measured the OHRQoL in edentulous patients 60 years or older were searched for in the PubMed, Embase and Scopus electronic databases, with additional hand searching to summarize the outcomes of the selected studies. Result: Among the 302 identified studies, 10 studies were selected. A total of 504 patients wearing 133 complete dentures, 372 implant overdentures and 39 fixed prostheses were assessed among the selected studies. The overall OHIP and GOHAI scores were evaluated at baseline and in the 3rd, 6th, 12th and 18th months of treatment with the respective prostheses. The improved OHRQoL with overall OHIP scores associated with conventional dentures were 9.21-12.5% from the 3rd month to 1 year after treatment, whereas those associated with implant overdentures and full-arch fixed prosthesis were 9-25.26% at 1 year and 18.53-26.79 at the 18th-month follow-up, respectively. The increased overall GOHAI scores were 21.3-25.43% for conventional dentures, 36.82-41.32% for implant overdentures and 39.48-42.83% for full-arch fixed prosthesis from the 3rd month to the 6th-month follow-up. Conclusion: In general, the improvement in OHRQoL after rehabilitation with implant overdentures declined at one year, and that with full-arch fixed prosthesis declined at the 18th-month follow-up; meanwhile, the OHRQoL associated with conventional dentures improved stably up to one year, but the implant-supported prostheses resulted in an obviously greater improvement in the OHRQoL than that obtained with conventional dentures. However, studies with longer follow-up periods are still required to evaluate the long-term clinical effectiveness.

Effects of Overnight Denture Cleaners on Surface and Optical Properties of Conventional, CAD/CAM Milled, and 3D Printed Dentures.

OBJECTIVE: Evaluate the roughness and color stability of different types of resins used to immerse denture bases in various denture cleansers overnight. METODOLOGY: A total of 150 resin samples were made, which were divided into 3 groups of denture resin (conventional thermally activated, milled and 3D printed) (n= 50) and subdivided into 5 denture cleaners (Distilled water, Corega Tabs, Efferdent, NaOCl 1.0%, Listerine Cool Hint) (n= 10). The roughness properties (Ra) and chromatic difference (ΔE00) were evaluated during 90 days and 180 days of overnight cleaning. Data were evaluated by two-way ANOVA and Tukey's test for multiple comparisons (P<.05). RESULTS: Listerine had significantly higher Ra and ΔE values (P<.001) compared to other solutions, being significant in conventional resin at 180 days (P<.001). CONCLUSIONS: The use of Listerine as an overnight cleaner presents greater damage to the optical and surface properties of denture base resins, mainly with conventional resin, with 1% NaOCl being a valid option in relation to cost-benefit.

Evaluation of different taste sensations along with body mass index (BMI) in geriatric patients with and without complete dentures.

BACKGROUND: The purpose of this study was to investigate the effect of acrylic full removable dentures on the perception of four primary tastes (sweet, sour, salty, and bitter), as well as to determine if there is a correlation between changes in body mass index (BMI) and taste perception. MATERIALS AND METHODS: A total of 60 patients who wore acrylic removable dentures and 60 controls were included in the study as a convenient sample. Sixteen solutions for basic tastes were prepared, and the patients were asked to identify the taste of each solution from the lowest concentration. Anthropometric measures, such as height and weight, were measured and recorded in an MS-Excel sheet. The data were analyzed using SPSS version 23. RESULTS: The results showed that patients with complete removable dentures had lower taste scores for sourness (P < 0.001) and sweetness (P < 0.001) compared to the control group. However, there was no significant difference in salt taste scores (P = 0.218) and bitterness (P = 0.002) between the two groups. Additionally, the study found a correlation between lower BMI values and higher taste scores among denture-wearing patients, indicating an inverse relationship between total taste scores and BMI. CONCLUSIONS: The study suggests that geriatric patients with complete dentures have reduced taste sensations compared to those without dentures which can have a negative impact on their nutritional status. Therefore, it is crucial to provide adequate nutritional support and dietary counseling for geriatric patients based on health policy to maintain their overall health and well-being.

Antimicrobial Properties of Aloe vera Ethanol Extract as a Denture Disinfectant: An In Vitro Study.

Introduction The aim of this study was to evaluate the activity of an ethanolic extract of Aloe vera on Candida albicans and Staphylococcus aureus. Materials and methods A total of 42 heat-cured acrylic resin specimens were made and divided into three groups according to the disinfection method: (1) Corega disinfectant tablets; (2) ethanol extract of Aloe vera; and (3) distilled water (as a control group). Fresh Aloe vera whole leaves were washed with distilled water, chopped into small pieces, air-dried, and ground into powder. The powder was extracted with 95% ethanol. The acrylic specimens were contaminated with C. albicans and S. aureus, and then the specimens were immersed in study solutions for three minutes. The viable colonies were counted using the colony-forming units (CFU) method. Results The results showed a decrease in the number of C. albicans CFU for denture tablets and Aloe vera ethanoic extract groups compared to the negative control group. There were no significant statistical differences between the denture tablet group and the Aloe vera ethanolic extract group (P < 0.05). Aloe vera ethanolic extract groups significantly decreased the number of S. aureus CFU compared to the negative control group and less compared to the denture tablet, where significant statistical differences were found between the tablet group and the Aloe vera ethanolic extract group. Conclusions Within the limitations of this study, it was concluded that Aloe vera extract was effective against C. albicans and S. aureus when acrylic resin specimens were immersed for three minutes.

Lactoferrin as a potential therapeutic for the treatment of Candida-associated denture stomatitis.

BACKGROUND: The use of prostheses in the oral cavity creates favorable conditions for Candida colonization, which may subsequently lead to Candida-associated denture stomatitis (CADS). Due to its many contributing factors and frequent relapses, CADS is difficult to manage. Given the rise in drug resistance among fungal species, it is critical to develop new therapeutic approaches, reduce the required dosage of medications, and minimize the toxicity and side effects of therapy. HIGHLIGHT: Salivary lactoferrin, a multifunctional glycoprotein, is thought to be the first line of defense against microbial invasion of mucosal surfaces. CONCLUSION: Current research emphasizes the capability of lactoferrin and its derivatives to eliminate a broad spectrum of Candida species. It may be an appealing option for use in monotherapy or in combination with common medications for oral stomatitis treatment. This review provides an overview of the current understanding of lactoferrin's anti-fungal effects in oral candidiasis.

Tendency of microbial adhesion to denture base resins: a systematic review.

Objectives: Digital denture fabrication became an alternative method to conventional denture fabrication. However reviewing the antimicrobial performance of newly introduced digital fabrication methods in comparison to the conventional method is neglected. Aim of study: this review was to compare the antiadherence properties of various CAD-CAM subtractive (milled), additive (3D printed) conventional denture base resins. In order to answer the developed PICO question: "Does CAD-CAM milled and 3D printed denture base resins have microbiological antiadherence properties over the conventional ones?" We included comparative studies on digitally fabricated Denture base resins with conventionally fabricated one in term of microbial adhesion. Methods: All in vitro studies investigated the microbial adherence to CAD-CAM milled and 3D printed denture base resins in comparison to conventional were searched in the PubMed, Web of Sciences, and Scopus databases up to December 2023. Results: Fifteen studies have been investigated the microbial adhesion to milled and 3D printed denture base resins. CAD-CAM milled resins significantly decreased the microbial adhesion when compared with the conventional resins and 3D printed resins, while the later showed a high tendency for microbial adhesion. The addition of antifungal agents to 3D printed resins significantly reduced C. albicans adhesion. In terms of 3D printing parameters, printing orientation affected adherence while printing technology had no effect on microbial adhesion. Conclusion: Denture base materials and fabrication methods significantly affect the microbial adhesion. CAD-CAM milled denture base resins demonstrated low microbial adhesion. 3D-printed resins showed high tendency for C. albicans adhesion. The antiadherent properties of 3D-printed resins can be improved by incorporating antifungal agents or changing the printing parameters, but further investigations are required to validate these modifications.

Multidisciplinary Therapeutic Approach of a Patient With Sjogren's Syndrome: A Three-Year Follow-Up Study.

Sjögren's syndrome is a chronic, inflammatory autoimmune disorder characterized by lymphocyte infiltration of the exocrine glands. Notably, the rehabilitation of partially edentulous patients with Sjögren's syndrome is limited by the scarce availability of studies that could inform therapeutic modalities and potential challenges during clinical procedures. This case report aimed to present the oral rehabilitation of a patient with Sjögren's syndrome who received fixed partial dentures (FPDs). A 28-year-old female patient sought treatment to restore her missing teeth. She was diagnosed with Sjögren's syndrome by a rheumatologist adhering to the revised version of the European criteria proposed by the American-European Consensus Group and was on a medication regimen including prednisolone, hydroxychloroquine, pantoprazole, pilocarpine, and tear substitutes to manage her condition. The final treatment plan consisted of extractions, management of gingivitis, post-and-core restorations, and a 2 mm vertical dimension increase with the placement of 15 porcelain-fused-to-metal (PFM) crowns and 4 short-span bridges. The patient underwent regular clinical and radiographic evaluations every 3 months since June 2020. Throughout this period, the fixed prostheses, teeth, and periodontal tissues demonstrated remarkable stability and exhibited no complications. This three-year case study provides evidence that meticulous planning and clinical execution can facilitate successful oral rehabilitation in young edentulous patients with Sjögren's syndrome. Tooth-supported fixed prostheses can effectively restore oral function and aesthetic appeal in these individuals, provided they undergo more frequent dental examinations than the general population and maintain a cooperative attitude throughout the treatment process.

A digital workflow for designing and manufacturing metal frameworks and removable partial dentures: A novel dental technique.

The purpose of this technical report is to demonstrate a fully digital workflow for designing and fabricating metal frameworks and removable partial dentures. After obtaining a digital cast of the dental arch with bilateral distal extension defect, computer-aided design software and 3D printing technology are used for the design and fabrication of the removable partial denture frameworks, denture teeth, and denture bases, instead of the traditional workflow. The assembly of the three components is facilitated through a meticulously structured framework. The technology, which prints metal frameworks, denture bases, and denture teeth through different processes with different materials, achieves full 3D printing technology for making removable partial dentures.

Clinical evaluation on the use of a new accessory device for Fox plane.

OBJECTIVE: Evaluate the assimilation capacity and ease of handling of the Fox plane accessory by dentistry students, through a questionnaire about the experience in using this device compared to the conventional one. Its intention is to minimize possible interpretation errors and challenges that the traditional method determines. METHODS: After approval by the Research Ethics Committee, registration at Sistema Nacional de Informações sobre Ética em Pesquisa/National Information System on Research Ethics (SISNEP) and signing of the free and informed consent form, 51 undergraduate students treating patients in need of complete dentures at Instituto de Ciência e Tecnologia/Institute of Science and Technology (ICT) Unesp in São José dos Campos completed a questionnaire to evaluate the technical ease of use and provider acceptance. The obtained data were submitted to statistical analysis, evaluating technical ease and acceptance by operators. RESULTS: The results were analyzed using descriptive and inferential statistics using the Jamovi 2.2.5 software. From the responses, the frequency was obtained for each question in the questionnaire, then the weighted mean was calculated, average rating and percentage. With the results of these analyses it was possible to measure the level of satisfaction of the participants in relation to the use of the device. CONCLUSION: It was concluded that most students have difficulty using the conventional Fox plane and that the accessory facilitated the process of determining the superior orientation plane, and its ease of use.

Evaluation of open-face maxillary complete denture for patients with prominent premaxilla: a crossover study.

BACKGROUND: The establishment of good facial esthetics is one of the main objectives of complete denture construction. Unfortunately, it may be the caused issue for patients having a prominent premaxilla due to excessive lip support by the labial flange of the maxillary denture. Open-face dentures (OFD) may suggest suitable prosthetic management for these patients. However, clinical evidence regarding the efficiency of OFD is scarce. METHODS: A total of 38 completely edentulous participants having prominent premaxilla and skeletal class I Angle's classification were enrolled in this study. Each participant received a mandibular complete denture and 2 opposing maxillary dentures; conventional (CD) and open-face (OFD). On the day of denture insertion, the participants were divided into 2 groups; CD-OFD and OFD-CD where CD-OFD group was instructed to use the mandibular denture and the maxillary CD for 3 months and then to use the maxillary OFD for another 3 months after a wash-out period of 2 weeks. While group OFD-CD was instructed to use the mandibular denture and the maxillary OFD for 3 months then to use the maxillary CD for another 3 months after a wash-out period of 2 weeks. The dislodging force of the maxillary dentures was evaluated using the universal testing machine and the patient perception of retention, esthetics, and comfort was evaluated using the Visual Analogue Scale (VAS). Evaluation was carried out 1 day, 1 month, and 3 months after denture insertion. The Student t-test was used to compare the 2 maxillary dentures and the intervals for each denture were compared by using the ANOVA test with repeated measures followed by a Post Hoc test (adjusted Bonferroni) for pairwise comparison. RESULTS: The significance of the obtained results was judged at the 5% level (P value). The dislodging force and patient perception of retention did not show significant differences between the 2 dentures, while the perception of esthetics showed significant differences throughout the follow-up period. Perception of comfort showed an insignificant difference only at the 3-month interval. CONCLUSIONS: Open-face maxillary dentures can be a suitable alternative for patients with prominent premaxilla to achieve satisfactory retention, aesthetics, and comfort.

The Effect of Exposure to Candida Albicans Suspension on the Properties of Silicone Dental Soft Lining Material.

While functioning in the oral cavity, denture soft linings (SL) are exposed to contact with the microbiota. Dentures can offer perfect conditions for the multiplication of pathogenic yeast-like fungi, resulting in rapid colonisation of the surface of the materials used. In vitro experiments have also shown that yeast may penetrate SL. This may lead to changes in their initially beneficial functional properties. The aim of this work was to investigate the effect of three months of exposure to a Candida albicans suspension on the mechanical properties of SL material and its bond strength to the denture base polymer, and to additionally verify previous reports of penetration using a different methodology. Specimens of the SL material used were incubated for 30, 60 and 90 days in a suspension of Candida albicans strain (ATCC 10231). Their shore A hardness, tensile strength, and bond strength to acrylic resin were tested. The colonization of the surface and penetration on fractured specimens were analysed with scanning electron and inverted fluorescence microscopes. Exposure to yeast did not affect the mechanical properties. The surfaces of the samples were colonised, especially in crystallized structures of the medium; however, the penetration of hyphae and blastospores into the material was not observed.

Analysis of the Microstructural and Mechanical Properties of 3D-Printed Removable Partial Denture Base Materials.

Background: Recent advancements in three-dimensional (3D) printing have introduced novel materials for removable partial dentures (RPD) base fabrication, promising improved mechanical properties, and biocompatibility. Materials and Methods: In this study, three different RPD base materials were evaluated: conventional heat-cured acrylic resin (Control), biocompatible 3D-printed resin (Test Group A), and a novel nanocomposite 3D-printed resin (Test Group B). A total of 30 standardized RPD base specimens (n = 10 per group) were fabricated according to established protocols. Microstructural analysis was performed using scanning electron microscopy (SEM), and the mechanical properties, including flexural strength and modulus, were determined using a universal testing machine. Results: Microstructural analysis revealed distinct differences among the materials. SEM images showed a well-defined and homogeneous microstructure in Test Group B, while Test Group A exhibited fewer voids compared to the Control group. Mechanical testing results indicated that Test Group B had the highest flexural strength (120 ± 5 MPa), followed by Test Group A (90 ± 4 MPa), and the Control group (75 ± 3 MPa). Similarly, Test Group B demonstrated the highest flexural modulus (3.5 ± 0.2 GPa), followed by Test Group A (2.8 ± 0.1 GPa), and the Control group (2.1 ± 0.1 GPa). Conclusion: These findings suggest that 3D-printed RPD base materials, particularly nanocomposite resins, hold promise for improving the overall quality and durability of removable partial dentures.