Adulteration and substitution of drugs purchased in Australia from cryptomarkets: An analysis of Test4Pay.

INTRODUCTION: Prohibited drugs in unregulated markets may be adulterated, resulting in increased risks for people who use drugs. This study investigated levels of drug adulteration and substitution of drugs purchased in Australia from cryptomarkets. METHODS: Data were collected from a darknet forum called Test4Pay from 1 September 2022 to 23 August 2023. Posts were included if they reported the results of drug samples submitted by post to the Vancouver-based Get Your Drugs Tested service, which uses Fourier-transform infrared spectroscopy with immunoassay strip tests (fentanyl and benzodiazepines). RESULTS: Of 103 samples, 65% contained only the advertised substance, 14% contained the advertised substance in combination with other psychoactive and/or potentially harmful substances and for 21%, the advertised substance was absent. Substances sold as MDMA, methamphetamine or heroin were consistently found to contain only the advertised substance, while substances sold as 2C-B, alprazolam or ketamine were the most likely to be completely substituted. Only 4 samples sold as cocaine contained solely the advertised substance, with 13 containing cocaine with adulterants like lidocaine, creatine, levamisole and boric acid (n = 19). No fentanyl contamination was detected. Novel dissociatives and novel benzodiazepines were detected, as well as a nitazene compound. DISCUSSION AND CONCLUSIONS: Drug markets under prohibition continue to contain numerous unexpected substances, some of which can elevate risk of harm. Cryptomarkets are not immune to this problem, despite review systems, which should, in theory, make vendors more accountable for the quality of their stock. These findings demonstrate a need for expansion of local drug checking services in Australia.

Characterising differences between self-reported and wastewater-identified drug use at two consecutive years of an Australian music festival.

BACKGROUND: In the context of drug prohibition, potential adulteration and variable purity pose additional health risks for people who use drugs, with these risks often compounded by the outdoor music festival environment. Ahead of the imminent implementation of drug checking services in Queensland, Australia, this study aims to characterise this problem using triangulated survey and wastewater data to understand self-reported and detected drug use among attendees of a multi-day Queensland-based music festival in 2021 and 2022. METHODS: We administered an in-situ survey focusing on drug use at the festival to two convenience samples of 136 and 140 festival attendees in 2021 and 2022 respectively. We compared survey findings to wastewater collected concurrently from the festival's site-specific wastewater treatment plant, which was analysed using Liquid Chromatography Tandem Mass Spectrometry. RESULTS: Most survey respondents (82 % in 2021, 92 % in 2022) reported using or intending to use an illicit drug at the festival. Some respondents reported potentially risky drug use practices such as using drugs found on the ground (2 % in 2021, 4 % in 2022). Substances detected in wastewater but not surveys include MDEA, mephedrone, methylone, 3-MMC, alpha-D2PV, etizolam, eutylone, and N,N-dimethylpentylone. CONCLUSION: Many substances detected in wastewater but not self-reported in surveys likely represent substitutions or adulterants. These findings highlight the benefits of drug checking services to prevent harms from adulterants and provide education on safer drug use practices. These findings also provide useful information on socio-demographic characteristics and drug use patterns of potential users of Queensland's future drug checking service.

Sterility of antibiotic-admixed peritoneal dialysis solution over time.

BACKGROUND: Intraperitoneal antibiotics may be required daily for up to three weeks to treat peritoneal dialysis (PD)-related peritonitis. In some jurisdictions, antibiotic-admixed PD solutions are required to be used within 24 h due to concerns regarding microbial contamination and growth. This requires patients to attend the PD unit daily or alternatively for staff to perform home delivery with associated transport, staffing and cost implications. OBJECTIVE: The aim of this study was to determine if significant microbial growth occurs in PD solutions following their injection with antibiotic or sterile water. METHODS: Twelve PD solution bags were admixed with cefazolin sodium 1 g, diluted in 10 mL sterile water, while a further 12 PD solution bags were admixed with 10 mL sterile water using aseptic technique (AT) under supervision. All bags were stored at room temperature. Three bags from each experimental group were sampled for microbiologic culture at 0-, 24-, 48- and 72-h intervals. RESULTS: One sterile water admixed bag sampled at 24 h yielded a Corynebacterium spp. after microbiologic culture. A repeat specimen from the same bag at day nine returned a negative culture result. All other sterile water and cefazolin admixed bags returned negative culture results at all time points. CONCLUSIONS: Antibiotic-admixed PD solutions prepared using AT and stored at room temperature remained sterile for up to 72 h. This suggests that patients can be safely issued with a supply of antibiotic-admixed PD bags for up to three days at a time.

External hair contamination from cannabis and "light cannabis" delivered by smoking and vaping: An in vitro study.

External contamination of hair by cannabis smoking requires a careful evaluation in forensic toxicology. Medical and recreational cannabis are increasingly consumed by e-cigarettes, which give rise to side-stream vapor. Moreover, products containing low Δ9-tetrahydrocannabinol (Δ9-THC) and rich in cannabidiol (CBD) started spreading legally. The goal of the present study was to assess whether hair analysis could allow to distinguish the type of delivered product, with low or high Δ9-THC, and the delivering mode, by smoking or vaping. Contamination of blank hair was mimicked by in vitro exposure to low- (0.4%) and high-Δ9-THC (9.7%) products delivered by smoking and vaping within a small confined system. Cannabis vaping extracts were prepared to deliver identical target Δ9-THC doses. Eighty samples were analyzed by ultrahigh-performance liquid chromatography mass spectrometry and quantified for Δ9-THC and CBD. After contamination by cannabis smoking, THC levels were in line with past in vitro and in vivo studies. Samples exposed to cannabis (169.30 ng/mg) showed significantly higher Δ9-THC than hair exposed to "light cannabis" (35.54 ng/mg), and the opposite was seen for the CBD/Δ9-THC ratio. Hair contaminated by vaping or smoking did not show a statistically different Δ9-THC content. Under our in vitro conditions, hair analysis might allow to discriminate whether external contamination is determined by products containing low or high Δ9-THC, but not the delivering mode. More research is needed in real-life conditions, to see whether the same also applies to the interpretation of forensic casework.

Chemical decontamination of methamphetamine and ephedrine using an activated peroxide-containing cleaning solution.

Manufacture and recreational use of methamphetamine can result in widespread chemical contamination throughout a property. Hydrogen peroxide (H2O2)-based cleaning products have shown success against a number of chemical contaminants including agents of chemical warfare, and biological contaminants such as anthrax. They are considered to be environmentally friendly and economically viable and, as such, are used by many companies within the methamphetamine decontamination industry. The oxidative decontamination of methamphetamine and ephedrine hydrochloride was investigated in this current study, employing a commercially available H2O2-based decontamination product, Bio-Oxygen® Chem Decon. Methamphetamine and ephedrine were observed to degrade following pseudo-first order kinetics of (1.9 ± 0.4) × 10-2 min-1 and (2.2 ± 0.3) × 10-2 min-1, respectively. Major oxidation products identified through GC-MS analyses were phenylacetone oxime (from methamphetamine) and benzaldehyde (from ephedrine). LC-MS analysis revealed the presence of a number of N-oxygenated intermediates which allowed for the elucidation of an N-oxidation decomposition pathway reminiscent of flavin-containing monooxygenase enzymes. Using this information, further targeted research can be performed to understand the behaviour and persistence of these reaction products and accurate assessments can be achieved to estimate their impact on the exposure risks associated with chemical decontamination of amphetamine-type stimulants (ATS).

Method validation for the quantification of fluconazole and its organic impurities in raw material using high-performance liquid chromatography / Validación de la metodología para cuantificar el fluconazol y sus impurezas orgánicas en materia prima por cromatografía líquida de alta resolución

Introduction. The real laboratory conditions of each country, including climate, can affect the method's efficiency in analyzing a pharmacological substance. Thus, it is necessary to validate the process according to the corresponding guidelines and optimize it to ensure success and confidence in the results. Objective. The objective was to validate a methodology for fluconazole and its organic impurities quantification in raw material using high-performance liquid chromatography, with a diode array detector, under tropical climate conditions, and complying with all regulatory requirements. Materials and methods. We performed pre-validation tests of the method consisting of system adequacy, filters study, quantification limit, absence of systematic error, forced degradation studies, and solutions stability. In addition, we validated the specificity, linearity, accuracy, precision, and robustness of the system. Results. Separation of the degradation products from the analyte peaks allowed the achievement of the method's spectral purity. The solution's stability was not affected during the evaluated time (24 hours) at room temperature and under refrigeration. Linearity resulted in correlation coefficients greater than or equal to 0.999 for the evaluation and greater than or equal to 0.997 for impurities. We obtained a fluconazole recovery varying from 98 to 102% with an accuracy between 80 to 120% for impurities detection. The repeatability and reproducibility factor did not exceed a relative standard deviation of 2.0% for the evaluation and of 5.0% for the impurities, demonstrating the adequate robustness of the method. In addition, a short analysis execution time allowed the quick determination of the raw material quality. Conclusion. We demonstrated that the fluconazole quantification method validated by high-performance liquid chromatography is sufficiently selective, precise, exact, linear, and robust to generate accurate analytical results under real conditions, including the tropical climate of Colombia.

Introducción. La eficiencia de una metodología para analizar una sustancia farmacológica puede verse afectada por las condiciones reales del laboratorio de cada país, incluyendo el clima. Por esta razón, se requiere validar el método con las pautas recomendadas para ello y optimizar el proceso, para asegurar el éxito y la confianza en los resultados. Objetivo. Validar una metodología para la cuantificación simultánea del fluconazol (materia prima) y sus impurezas orgánicas mediante cromatografía líquida de alta resolución con detector de arreglo de diodos en condiciones de clima tropical y con todos los requisitos normativos. Materiales y métodos. Se hicieron pruebas previas a la validación del método: idoneidad del sistema, estudio de filtros, límite de cuantificación, ausencia del error sistemático, estudios de degradación forzada y estabilidad de las soluciones. Además, se validaron: la especificidad, la linealidad, la exactitud, la precisión y la robustez. Resultados. La pureza espectral del método se logró al obtener la separación de los productos de degradación de los picos de los analitos. La estabilidad de las soluciones no se vio afectada, en la frecuencia evaluada de 24 horas, a temperatura ambiente y de refrigeración. Se obtuvo una linealidad con coeficientes de correlación mayores o iguales a 0,999 para la valoración y mayores o iguales a 0,997 para las impurezas. La recuperación estuvo en el rango de 98 a 102,0 % de fluconazol, con una exactitud entre el 80 y el 120 % para las impurezas. El factor de repetibilidad y reproducibilidad no superó la desviación estándar relativa del 2,0 % para la valoración y, la del 5,0 %, para las impurezas, lo cual mostró una solidez adecuada del método. Además, se obtuvo un tiempo corto de ejecución del análisis, lo que permitió la rápida determinación de la calidad de la materia prima. Conclusión. Se demostró que el método de cuantificación de fluconazol, validado por cromatografía líquida de alta resolución con detector de arreglo de diodos, es lo suficientemente selectivo, preciso, exacto, lineal y robusto; además, es capaz de generar resultados analíticos veraces en condiciones de uso reales, incluyendo el clima tropical de Colombia.

Validación de la metodología para cuantificar el fluconazol y sus impurezas orgánicas en materia prima por cromatografía líquida de alta resolución / Method validation for the quantification of fluconazole and its organic impurities in raw material using high-performance liquid chromatography

Introducción. La eficiencia de una metodología para analizar una sustancia farmacológica puede verse afectada por las condiciones reales del laboratorio de cada país, incluyendo el clima. Por esta razón, se requiere validar el método con las pautas recomendadas para ello y optimizar el proceso, para asegurar el éxito y la confianza en los resultados. Objetivo. Validar una metodología para la cuantificación simultánea del fluconazol (materia prima) y sus impurezas orgánicas mediante cromatografía líquida de alta resolución con detector de arreglo de diodos en condiciones de clima tropical y con todos los requisitos normativos. Materiales y métodos. Se hicieron pruebas previas a la validación del método: idoneidad del sistema, estudio de filtros, límite de cuantificación, ausencia del error sistemático, estudios de degradación forzada y estabilidad de las soluciones. Además, se validaron: la especificidad, la linealidad, la exactitud, la precisión y la robustez. Resultados. La pureza espectral del método se logró al obtener la separación de los productos de degradación de los picos de los analitos. La estabilidad de las soluciones no se vio afectada, en la frecuencia evaluada de 24 horas, a temperatura ambiente y de refrigeración. Se obtuvo una linealidad con coeficientes de correlación mayores o iguales a 0,999 para la valoración y mayores o iguales a 0,997 para las impurezas. La recuperación estuvo en el rango de 98 a 102,0 % de fluconazol, con una exactitud entre el 80 y el 120 % para las impurezas. El factor de repetibilidad y reproducibilidad no superó la desviación estándar relativa del 2,0 % para la valoración y, la del 5,0 %, para las impurezas, lo cual mostró una solidez adecuada del método. Además, se obtuvo un tiempo corto de ejecución del análisis, lo que permitió la rápida determinación de la calidad de la materia prima. Conclusión. Se demostró que el método de cuantificación de fluconazol, validado por cromatografía líquida de alta resolución con detector de arreglo de diodos, es lo suficientemente selectivo, preciso, exacto, lineal y robusto; además, es capaz de generar resultados analíticos veraces en condiciones de uso reales, incluyendo el clima tropical de Colombia.

Introduction. The real laboratory conditions of each country, including climate, can affect the method's efficiency in analyzing a pharmacological substance. Thus, it is necessary to validate the process according to the corresponding guidelines and optimize it to ensure success and confidence in the results. Objective. The objective was to validate a methodology for fluconazole and its organic impurities quantification in raw material using high-performance liquid chromatography, with a diode array detector, under tropical climate conditions, and complying with all regulatory requirements. Materials and methods. We performed pre-validation tests of the method consisting of system adequacy, filters study, quantification limit, absence of systematic error, forced degradation studies, and solutions stability. In addition, we validated the specificity, linearity, accuracy, precision, and robustness of the system. Results. Separation of the degradation products from the analyte peaks allowed the achievement of the method's spectral purity. The solution's stability was not affected during the evaluated time (24 hours) at room temperature and under refrigeration. Linearity resulted in correlation coefficients greater than or equal to 0.999 for the evaluation and greater than or equal to 0.997 for impurities. We obtained a fluconazole recovery varying from 98 to 102% with an accuracy between 80 to 120% for impurities detection. The repeatability and reproducibility factor did not exceed a relative standard deviation of 2.0% for the evaluation and of 5.0% for the impurities, demonstrating the adequate robustness of the method. In addition, a short analysis execution time allowed the quick determination of the raw material quality. Conclusion. We demonstrated that the fluconazole quantification method validated by high-performance liquid chromatography is sufficiently selective, precise, exact, linear, and robust to generate accurate analytical results under real conditions, including the tropical climate of Colombia.

Attitudes and experiences with fentanyl contamination of methamphetamine: exploring self-reports and urine toxicology among persons who use methamphetamine and other drugs.

BACKGROUND: There are growing concerns about illicitly manufactured fentanyl (IMF) contamination of methamphetamine. This study aims to characterize the lay views and experiences with IMF-contaminated methamphetamine (IMF/meth) and identify participants with unknown IMF exposures through urine toxicology analysis. METHODS: Between December-2019 and November-2021, structured interviews were conducted with 91 individuals who reported past 30-day use of methamphetamine and resided in Dayton, Ohio, USA. Lab-based urine toxicology analyses were conducted to identify fentanyl/analogs, methamphetamine, and other drugs. Bivariate analyses were conducted to identify characteristics associated with attitudes and experiences with IMF/meth, and unknown IMF exposures. RESULTS: The majority (95.6%) of the study participants were non-Hispanic white, and 52.7% were female. Past 30-day use of methamphetamine was reported on a mean of 18.7 (SD 9.1) days, and 62.6% also reported past 30-day use of heroin/IMF. Most (76.9%) had a history of an unintentional drug-related overdose, but 38.5% rated their current risk for an opioid overdose as none. Besides fentanyl (71.9%), toxicology analysis identified nine fentanyl analogs/metabolites (e.g., 42.7% acetyl fentanyl, 19.0% fluorofentanyl, 5.6% carfentanil), and 12.4% tested positive for Xylazine. The majority (71.4%) believed that IMF/meth was common, and 59.3% reported prior exposures to IMF/meth. 11.2% tested positive for IMF but reported no past 30-day heroin/IMF use (unknown exposure to IMF). Views that IMF/meth was common showed association with homelessness (p = 0.04), prior overdose (p = 0.028), and greater perceived risk of opioid overdose (p = 0.019). Self-reported exposure to IMF/meth was associated with homelessness (p = 0.007) and obtaining take-home naloxone (p = 0.025). Individuals with unknown IMF exposure (test positive for IMF, no reported past 30-day heroin/IMF use) were older (49.9 vs. 41.1 years, p < 0.01), and reported more frequent past 30-day use of methamphetamine (24.4 vs. 18.0 days, p < 0.05). They indicated lower perceived risk of opioid overdose (0.1 vs. 1.9, scale from 0 = "none" to 4 = "high," p < 0.001). DISCUSSION: This study suggests a need for targeted interventions for people who use methamphetamine and expansion of drug checking and other harm reduction services.

Profound Hyperthermia Associated With Fentanyl and Cocaine Use With Suspected Synephrine Adulteration.

BACKGROUND: Although hyperthermia is described after cocaine intoxication, the two hyperthermic cases discussed were unusual in severity and duration for cocaine alone. Synephrine was found in biological samples of these patients in high concentrations and was suspected to be an adulterant in illicitly obtained drugs. CASE REPORT: Two patients presented to a tertiary care university hospital within 2 days of each other after recreational drug use with delayed and protracted hyperthermia. Synephrine was later found in high concentrations in biological samples as an unexpected drug adulterant. The first patient's presentation came with delayed recognition of hyperthermia and implementation of aggressive cooling measures; he entered multisystem organ failure with prolonged intensive care unit stay and significant morbidity. The second patient's hyperthermia was recognized promptly, and she received early, aggressive cooling, including deep sedation and ice water submersion. She left against medical advice from the hospital at her baseline 3 days after presentation. WHY SHOULD AN EMERGENCY PHYSICIAN BE AWARE OF THIS?: Synephrine is a suspected adulterant that may be associated with profound hyperthermia. Early recognition of drug overdose and working knowledge of common adulterants can facilitate early targeted management, such as aggressive cooling measures, which may prevent morbidity and mortality.

Investigation of Carcinogenic Impurities of N-Nitrosamines in Sartan Pharmaceutical Products Marketed in Brazil: Development and Validation of Method Based on High-Performance Liquid Chromatography-Tandem Mass Spectrometry.

N-nitrosamines (NA) impurities have unexpectedly been found in sartan products, angiotensin II receptor antagonists that are used to control hypertension, representing an urgent concern for industry, global regulators and for the patients. In this study, an HPLC-MS/MS method was developed and validated for the quantification of six NA (N-nitrosodimethylamine, N-Nitroso-N-methyl-4-aminobutyric acid, N-Nitrosodiethylamine, N-ethyl-N-nitroso-2-propanamine, N-nitroso-diisopropylamine and N-nitroso-di-n-butylamine) in losartan, valsartan, olmesartan, irbesartan, candesartan and telmisartan products. The method was validated in terms of sensitivity, linearity, accuracy, precision, robustness and stability. The limits of quantification were 100, 31.25, 250, 33, 312.5 and 125 µg kg-1 in losartan, valsartan, olmesartan, irbesartan, candesartan and telmisartan samples, respectively, which met the sensitivity requirements for the limits set by Food and Drug Administration of the United States. The standard curves showed good linearity. The recoveries ranged from 93.06 to 102.23% in losartan matrix, 83 to 85.9% in valsartan, 96.1 to 101.2% in olmesartan, 89.2 to 97.5% in irbesartan, 93.4 to 132.0% in candesartan and 62.3 to 106.2% in telmisartan matrix. The other parameters met the validation criteria, the good sensitivity and precision, high accuracy and simple and fast analysis provides a reliable method for quality control of NA in sartan pharmaceutical products. The developed method was successfully applied for the determination of N-nitrosamines in 71 sartan products marketed in Brazil.

Evaluation of Zebrafish DNA Integrity after Individual and Combined Exposure to TiO2 Nanoparticles and Lincomycin.

Environmental contamination by nanoparticles (NPs) and drugs represents one of the most debated issues of the last years. The aquatic biome and, indirectly, human health are strongly influenced by the negative effects induced by the widespread presence of pharmaceutical products in wastewater, mainly due to the massive use of antibiotics and inefficient treatment of the waters. The present study aimed to evaluate the harmful consequences due to exposure to antibiotics and NPs, alone and in combination, in the aquatic environment. By exploiting some of their peculiar characteristics, such as small size and ability to bind different types of substances, NPs can carry drugs into the body, showing potential genotoxic effects. The research was conducted on zebrafish (Danio rerio) exposed in vivo to lincomycin (100 mg/L) and titanium dioxide nanoparticles (TiO2 NPs) (10 µg/L) for 7 and 14 exposure days. The effects on zebrafish were evaluated in terms of cell viability, DNA fragmentation, and genomic template stability (GTS%) investigated using Trypan blue staining, TUNEL assay, and the random amplification of polymorphic DNA PCR (RAPD PCR) technique, respectively. Our results show that after TiO2 NPs exposure, as well as after TiO2 NPs and lincomycin co-exposure, the percentage of damaged DNA significantly increased and cell viability decreased. On the contrary, exposure to lincomycin alone caused only a GTS% reduction after 14 exposure days. Therefore, the results allow us to assert that genotoxic effect in target cells could be through a synergistic effect, also potentially mediated by the establishment of intermolecular interactions between lincomycin and TiO2 NPs.

Evaluation of external contamination on the vial surfaces of some hazardous drugs that commonly used in Chinese hospitals and comparison between environmental contamination generated during robotic compounding by IV: Dispensing robot vs. manual compounding in biological safety cabinet.

OBJECTIVES: The aims of the study were to evaluate the external contamination of hazardous drug vials used in Chinese hospitals and to compare environmental contamination generated by a robotic intelligent dispensing system (WEINAS) and a manual compounding procedure using a biological safety cabinet (BSC). METHODS: Cyclophosphamide, fluorouracil, and gemcitabine were selected as the representative hazardous drugs to monitor surface contamination of vials. In the comparative analysis of environmental contamination from manual and robotic compounding, wipe samples were taken from infusion bags, gloves, and the different locations of the BSC and the WEINAS robotic system. In this study, high-performance liquid chromatography coupled with double mass spectrometer (HPLC-MS/MS) was employed for sample analysis. RESULTS: (1) External contamination was measured on vials of all three hazardous drugs. The contamination detected on fluorouracil vials was the highest with an average amount up to 904.33 ng/vial, followed by cyclophosphamide (43.51 ng/vial), and gemcitabine (unprotected vials of 5.92 ng/vial, protected vials of 0.66 ng/vial); (2) overall, the environmental contamination induced by WEINAS robotic compounding was significantly reduced compared to that by manual compounding inside the BSC. Particularly, compared with manual compounding, the surface contamination on the infusion bags during robotic compounding was nearly nine times lower for cyclophosphamide (10.62 ng/cm2 vs 90.43 ng/cm2), two times lower for fluorouracil (3.47 vs 7.52 ng/cm2), and more than 23 times lower for gemcitabine (2.61 ng/cm2 vs 62.28 ng/cm2). CONCLUSIONS: The external contamination occurred extensively on some hazardous drug vials that commonly used in Chinese hospitals. Comparison analysis for both compounding procedures revealed that robotic compounding can remarkably reduce environmental contamination.

Are multiple-use bottles of chlorhexidine solutions at risk of contamination in joint replacement surgery?

INTRODUCTION: Chlorhexidine gluconate 2% w/v in isopropanol 70% solutions in multiple-use bottles is commonly used in surgery as a cost-effective method for skin disinfection. However, multiple-use bottles risk contamination. This study aims to test whether bacterial contamination of multiple-use bottles or their solutions occurs once open and on use between different patients. METHODS: Consecutive samples were taken each time a chlorhexidine bottle was used over a 7-day study period. Samples were tested using blood culture, agar plate and mass spectrometry. RESULTS: No growth was observed in 52 samples taken from 18 bottles inoculated into blood culture bottles. Four growths on agar plate culture were determined to be contaminants from the sampling process. CONCLUSIONS: This study supports the use of multiple-use bottled chlorhexidine solutions as safe and cost-effective in surgical practice.

Evaluation of microbial contamination in multi-dose fluorescein eyedrops in a reference eye center / Avaliação da contaminação microbiana em colírios multi-dose de fluoresceína em um centro oftalmológico de referência

ABSTRACT Purpose: To analyze the presence of microorganisms in fluorescein eyedrops used in a reference eye center in Recife-PE. Methods: This real-life and masked study evaluated fluorescein eyedrops used at the Altino Ventura Foundation in May 2019. Cultures were performed according to exposure times; I) three eyedrop bottles were analyzed after one day of use, II) three eyedrop bottles after 4 d of use, III) three eyedrop bottles after 8 d of use, and IV) three unopened bottles used as control. Samples were collected from the bottle's tip, instilled drop, and residual fluid. After incubation, all colonies were analyzed and identified through biochemical tests. Results: The contamination rate of the fluorescein eyedrop bottles in this study was 55.5% (5/9 vials). There was no contamination in the control group. The highest contamination was seen in one day exposed eyedrops, in 100% of the bottles. The bottle's tip had a higher rate of contamination compared to the drop and residual fluid. Gram-positive bacteria were isolated in 7/27 (25.9%) samples. Growth of fungi or gram-negative bacteria was not observed. Conclusion: The identification of gram-positive bacteria predominantly on the tip of the fluorescein eyedrop bottles suggests inadequate handling as the main cause of contamination.

RESUMO Objetivo: Analisar a presença de microrganismos nos colírios de fluoresceína utilizados em um centro oftalmológico de referência em Recife-PE. Métodos: Este estudo de vida real e mascarado avaliou colírios de fluoresceína utilizados na Fundação Altino Ventura em maio/2019. As culturas foram realizadas de acordo com os diferentes tempos de exposição: I - três frascos de colírio foram analisados após 1 dia de uso; II - três frascos de colírio após 4 dias de uso; III - três frascos de colírio após 8 dias de uso; IV - três garrafas fechadas foram usadas como grupo controle. As amostras foram coletadas da ponta do frasco, da gota instilada e do líquido residual interior. Após incubação, todas as colônias foram analisadas e identificadas através de testes bioquímicos. Resultados: A taxa de contaminação dos frascos de colírio de fluoresceína neste estudo foi de 55,5% (5/9 frascos). Não houve contaminação no grupo controle. A maior contaminação foi observada os colírios expostos de um dia - 100% dos frascos. A ponta da garrafa teve uma maior taxa de contaminação em comparação com as culturas de gota e de fluido residual inferior. Bactérias gram-positivas foram isoladas em 7/27 amostras (25,9%). Não houve crescimento de fungos ou bactérias Gram-negativas. Conclusão: A identificação de bactérias Gram-positivas predominantemente na ponta dos frascos de colírio de fluoresceína sugere manuseio inadequado como a principal causa de contaminação de colírios multidose.

Avoiding unconscious injection of vial-derived rubber particles during intra-articular drug administration.

Objective: Vial coring describes the occurrence of small rubber particles, which are formed by needles when perforating vial stoppers. These particles may be aspirated along with the drug. Unconscious injection of rubber particles may increase the risks associated with intra-articular injections. This study aimed to analyze the frequency of this phenomenon and possibilities to avoid its occurrence. Method: 800 vials of 2 â€‹mL, filled with sodium chloride, were divided into 4 groups (n â€‹= â€‹200 each). Aspiration through the rubber stopper was performed with a 18-Gauge needle and the fluid was ejected onto a 10 â€‹µm filter paper through a 18-Gauge needle (group one) and a 23-Gauge needle (group two). In group three a 23-Gauge needle was used for aspiration and ejection. In group four, aspiration was performed using 18-Gauge needles with implemented 5 â€‹µm filters. Subsequently, a microscopic analysis of the filter papers was performed. Results: In none of the 800 specimen, a rubber particle was detected by naked eye. Microscopically, 20 (10%) rubber particles were detected in group one, 21 (11%) in group two and 65 (33%) in group three. In group four, no particles were visualized. Conclusion: This study shows the occurrence of rubber particles in 10-33% of the cases, when standard needles are used for the aspiration of drugs. We therefore recommend using industrially prefilled syringes, filter needles or removing the rubber stopper before withdrawing drugs from vials for intra-articular injections.

Single-use lidocaine hydrochloride 5 per cent w/v and phenylephrine hydrochloride 0.5 per cent w/v topical spray; can it now be employed as a multi-use atomiser?

OBJECTIVE: This study investigated the risk of contamination of lidocaine hydrochloride 5 per cent w/v and phenylephrine hydrochloride 0.5 per cent w/v topical solution after modification of the application technique. METHODS: This paper reports a prospective basic sciences study involving 22 study samples and 1 control sample of the lidocaine hydrochloride and phenylephrine hydrochloride topical anaesthetic spray. The samples were assessed for microbiological contamination after a single use on patients using a modified application technique. The modification involves keeping the nozzle (actuator) pressed down whilst withdrawing the spray to at least 30 cm (1 ft) from the patient, before releasing the nozzle (actuator) and subsequently reapplying the spray. RESULTS: Three of the 23 samples confirmed bacterial growth in the bottle contents, but there was no growth in any of the samples from the pump. These bacteria are considered to be contaminants. CONCLUSION: There is a potential to use the lidocaine hydrochloride 5 per cent w/v and phenylephrine hydrochloride 0.5 per cent w/v topical solution as a multi-use spray by changing the actuator between patients. This would have significant beneficial cost implications without the attendant infection control risk.

Development of ELISA and chemiluminescence enzyme immunoassay for quantification of histamine in drug products and food samples.

Histamine (HA) is a biogenic amine associated with allergies and food poisoning. It is an important indicator of food freshness and quality. In recent years, a series of medical negligence cases have been reported to be related to the intravenous injection of antibiotics produced via fermentation with fish peptone due to HA contamination. To detect HA efficiently, mouse monoclonal antibody was developed. An enzyme-linked immunosorbent assay (ELISA) and a chemiluminescence enzyme immunoassay (CLEIA) were developed and compared with conventional HPLC analysis. Both immunoassays showed low cross-reactivity, low 50% inhibitive concentration (IC50; 1.2 µg/mL and 1.1 µg/mL), low limits of detection (LODs, IC10; 89.0 ng/mL and 73.4 ng/mL), and appreciable recoveries in spiked foods and drugs (from 73.4 to 131.0% and from 77.0 to 119.0%, espectively), demonstrating that the developed methods are sensitive, specific, fast, and reliable for HA detection in complicated real samples. Graphical abstract.

Generic Drugs Not as Safe as FDA Wants You to Believe.

Food and Drug Administration (FDA) rules for the production of prescription drugs are very rigorous and, if followed, guarantees a safe drug supply. For many years, foreign manufacturers have produced substandard generic products and active pharmaceutical ingredients and shipped them into the United States. If the FDA had inspected them with the same rigor as they do domestic manufacturers, they would have found many of these egregious deviations from ethical manufacturing much earlier. Although the FDA is finally stepping up the number of inspections, their current processes still rely on preannounced inspections with long time horizons, so quality issues can be temporarily corrected and documents altered or destroyed.

A systematic investigation of forensic hair decontamination procedures and their limitations.

The effectiveness of decontamination procedures used for the removal of external drug contamination in forensic hair analysis is an ongoing debate. This investigation evaluated wash methods complying with Society of Hair Testing (SoHT) guidelines and their capacity to remove cocaine (COC) and methamphetamine (MA) from artificially contaminated hair. The most effective decontamination method was determined using a systematic approach, involving (1) an initial washing solvent screen, (2) optimization of wash duration, (3) comparison of sequential wash methods, and (4) reanalysis of clinical hair samples. For analysis, hair was subjected to micro-pulverized methanolic extraction prior to quantitation by ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Methanol (MeOH) and 0.1 M phosphate buffer (pH 6) were the most effective organic and aqueous solvents, respectively, removing 28%-38% of COC and 16%-31% of MA. Wash durations longer than 30-60 minutes did not remove additional amounts, and a more efficient sequential wash method was subsequently developed. Despite this, the interpretation of reportable results relative to the SoHT cut-off levels was unchanged for most clinical hair samples reanalyzed after washing by agitation for 30 minutes with MeOH. These findings highlight the inability of decontamination solvents to completely remove external COC and MA contamination from hair, including wash methods adhering to SoHT guidelines.

Multi-drug cocktails: Impurities in commonly used illicit drugs seized by police in Queensland, Australia.

BACKGROUND: Impurities in commonly used illicit drugs raise concerns for unwitting consumers when pharmacologically active adulterants, especially new psychoactive substances (NPS), are used. This study examines impurities detected in illicit drugs seized in one Australian jurisdiction. METHODS: Queensland Health Forensic and Scientific Services provided analytical data. Data described the chemical composition of 9346 samples of 11 illicit drugs seized by police during 2015-2016. Impurities present in primary drugs were summarized and tabulated. A systematic search for published evidence reporting similar analyses was conducted. RESULTS: Methamphetamine was the primary drug in 6608 samples, followed by MDMA (1232 samples) and cocaine (516 samples). Purity of primary drugs ranged from ∼30% for cocaine, 2-CB and GHB to >90% for THC, methamphetamine, heroin and MDMA. Methamphetamine and MDMA contained the largest variety of impurities: 22 and 18 variants, respectively. Drug adulteration patterns were broadly similar to those found elsewhere, including NPS, but in some primary drugs impurities were found which had not been reported elsewhere. Psychostimulants were adulterated with each other. Levamisole was a common impurity in cocaine. Psychedelics were adulterated with methamphetamine and NPS. Opioids were quite pure, but some samples contained methamphetamine and synthetic opioids. CONCLUSIONS: Impurities detected were mostly pharmacologically active adulterants probably added to enhance desired effects or for active bulking. Given the designer nature of these drug cocktails, the effects of the adulterated drugs on users from possible complex multi-drug interactions is unpredictable. Awareness-raising among users, research into complex multi-drug effects and ongoing monitoring is required.