Carboxymethyl cellulose-based rotigotine nanocrystals-loaded hydrogel for increased transdermal delivery with alleviated skin irritation.

Transdermal rotigotine (RTG) therapy is prescribed to manage Parkinson's disease (Neupro® patch). However, its use is suffered from application site reactions. Herein, drug nanocrystalline suspension (NS)-loaded hydrogel (NS-HG) employing polysaccharides simultaneously as suspending agent and hydrogel matrix was constructed for transdermal delivery, with alleviated skin irritation. RTG-loaded NS-HG was prepared using a bead-milling technique, employing sodium carboxylmethyl cellulose (Na.CMC) as nano-suspending agent (molecular weight 90,000 g/mol) and hydrogel matrix (700,000 g/mol), respectively. NS-HG was embodied as follows: drug loading: ≤100 mg/mL; shape: rectangular crystalline; crystal size: <286.7 nm; zeta potential: -61 mV; viscosity: <2.16 Pa·s; and dissolution rate: >90 % within 15 min. Nuclear magnetic resonance analysis revealed that the anionic polymers bind to RTG nanocrystals via charge interaction, affording uniform dispersion in the matrix. Rodent transdermal absorption of RTG from NS-HG was comparable to that from microemulsions, and proportional to drug loading. Moreover, NS-HG was skin-friendly; erythema and epidermal swelling were absent after repeated application. Further, NS-HG was chemically stable; >95 % of the drug was preserved up to 4 weeks under long term (25 °C/RH60%), accelerated (40 °C/RH75%), and stress (50 °C) storage conditions. Therefore, this novel cellulose derivative-based nanoformulation presents a promising approach for effective transdermal RTG delivery with improved tolerability.

Development of olanzapine solid dispersion by spray drying technique using screening design for solubility enhancement.

Introduction: Olanzapine (OLZ) is a psychotropic class drug commonly used to treat schizophrenia, bipolar disorder, and acute manic episodes. It has less water solubility, resulting in a slow dissolution rate and oral bioavailability. Therefore, the development in oral dosage forms is required to enhance the drug solubility. Method: The solid dispersion of olanzapine is prepared by spray drying technique. The solution of polyvinylpyrrolidone K-30 (PVP K-30), mono amino glycyrrhizinate pentahydrate (GLY), OLZ and silicon dioxide were dissolved in distilled water and ethanol and spray dried to get the solid dispersion. Solid dispersion was characterized for surface morphology, solubility, encapsulation efficiency (EE), X-ray diffraction (X-RD), Differential Scanning Calorimeter (DSC) and drug-polymer interaction by Fourier transforms infrared spectroscopy. Results: The amorphous nature of the drug's incorporation in solid dispersion was confirmed by X-RD analysis. Prepared solid dispersion showed higher solubility, 11.51 mg, than pure OLZ (0.983 mg ml-1), while the range of EE was found to be between 64 to 90 %. Conclusions: The solubility and dissolution rate of the OLZ can effectively increase by spray-dried solid dispersion. Plackett-Burman screening design plays a vital role in understanding the effect of independent variables on EE and solubility.

Investigation of tadalafil molecular arrangement in solid dispersions using inverse gas chromatography and Raman mapping.

The aim of this study was to investigate the molecular structures of tadalafil solid dispersions prepared by different techniques and further to relate them to surface free energy information indicating the final amorphousness of the product. Thus, we tried to complement the existing knowledge of solid dispersion formation. Poorly water-soluble tadalafil was combined with different polymers, i.e. Kollidon® 12 PF, Kollidon® VA 64 and Soluplus®, to form model systems. To assess the extent of drug-polymer miscibility, we studied model solid dispersion surface energy using inverse gas chromatography and phase micro-structure using confocal Raman microscopy. The selection of the preparation method was found to play a crucial role in the molecular arrangement of the incorporated drug and the polymer in resulting solid dispersion. Our results showed that a lower surface free energy indicated the formation of a more homogeneous solid dispersion. Conversely, a higher surface free energy corresponded to the heterogeneous systems containing tadalafil amorphous clusters that were captured by Raman mapping. Thus, we successfully introduced a novel evaluation approach of the drug molecular arrangement in solid dispersions that is especially useful for examining the miscibility of the components when the conventional characterizing techniques are inconclusive or yield variable results.

Quantifying how drug-polymer interaction and volume phase transition modulate the drug release kinetics from core-shell microgels.

This paper presents a simple experimental-informed theory describing the drug release process from a temperature-responsive core-shell microgel. In stark contrast to the commonly employed power-law models, we couple electric, hydrophobic, and steric factors to characterize the impact of drug-polymer pair interaction on the release kinetics. To this end, we also propose a characteristic time, depicting the drug release process as an interplay between kinetics and thermodynamics. In some instances, the negative correlation between the diffusivity and the (thermodynamics) drug-polymer interaction renders the drug release time non-trivial. In conclusion, our theory establishes a mechanistic understanding of the drug release process, exploring the effect of (hydrophobic adhesion) attractive and (steric exclusion) repulsive pair interactions between the drugs and the microgel in the presence of temperature-induced volume phase transition.

Polymer Grafting and its chemical reactions.

Polymer grafting is a technique to improve the morphology, chemical, and physical properties of the polymer. This technique has the potential to improve the existing conduction and properties of polymers other than charge transport; as a result, it enhances the solubility, nano-dimensional morphology, biocompatibility, bio-communication, and other property of parent polymer. A polymer's physicochemical properties can be modified even further by creating a copolymer with another polymer or by grafting. Here in the various chemical approaches for polymer grafting, like free radical, click reaction, amide formation, and alkylation have been discussed with their importance, moreover the process and its importance are covered comprehensively with their scientific explanation. The present review also covers the effectiveness of the graft-to approaches and its application in various fields, which will give reader a glimpse about polymer grafting and its uses.

Poloxamer-enhanced solubility of griseofulvin and its related antifungal activity against Trichophyton spp

Abstract Poorly water-soluble drugs, such as the antifungal drug griseofulvin (GF), exhibit limited bioavailability, despite their high membrane permeability. Several technological approaches have been proposed to enhance the water solubility and bioavailability of GF, including micellar solubilization. Poloxamers are amphiphilic block copolymers that increase drug solubility by forming micelles and supra-micellar structures via molecular self-association. In this regard, the aim of this study was to evaluate the water solubility increment of GF by poloxamer 407 (P407) and its effect on the antifungal activity against three Trichophyton mentagrophytes and two T. rubrum isolates. The GF water solubility profile with P407 revealed a non-linear behavior, well-fitted by the sigmoid model of Morgan-Mercer-Flodin. The polymer promoted an 8-fold increase in GF water solubility. Fourier-transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), and 2D nuclear magnetic resonance (NMR Roesy) spectroscopy suggested a GF-P407 interaction, which occurs in the GF cyclohexene ring. These results were supported by an increase in the water solubility of the GF impurities with the same molecular structure. The MIC values recorded for GF ranged from 0.0028 to 0.0172 mM, except for T. Mentagrophytes TME34. Notably, the micellar solubilization of GF did not increase its antifungal activity, which could be related to the high binding constant between GF and P407.

Application of Thermodynamic Phase Diagrams and Gibbs Free Energy of Mixing for Screening of Polymers for Their Use in Amorphous Solid Dispersion Formulation of a Non-Glass-Forming Drug.

The objective of the present investigations was to assess the use of thermodynamic phase diagrams and the Gibbs free energy of mixing, ΔGmix, for the screening of the polymeric carriers by determining the ideal drug-loading for an amorphous solid dispersion formulation and optimum processing temperature for the hot-melt extrusion of a non-glass-forming drug. Mefenamic acid (MFA) was used as a model non-glass-forming drug and four chemically distinct polymers with close values of the solubility parameters, viz. Kollidon® VA64, Soluplus®, Pluronic® F68, and Eudragit® EPO, were used as carriers. The thermodynamic phase diagrams were constructed using the melting point depression data, Flory-Huggins theory, and Gordan-Taylor equation. The Gibbs free energy of mixing was estimated using the values of the drug-polymer interaction parameter, χ, and Flory-Huggins theory. The rank order miscibility of MFA in the four polymeric carriers estimated based on the difference in the values of their solubility parameters, Δδ, did not correlate well with the thermodynamic phase diagrams and Gibbs free energy plots. The study highlights the limitation of using the solubility parameter method in screening the polymeric carriers for poorly glass-forming drugs and reiterates the applicability of thermodynamic phase diagrams and Gibbs free energy plots in determining the ideal drug-loading and optimum processing temperature for hot-melt extrusion.

Polysaccharide nanoparticles for oral controlled drug delivery: the role of drug-polymer and interpolymer interactions.

Introduction: The oral route still represents the most popular way of administering drugs; nowadays oral administration faces new challenges, in particular with regards to the delivery of APIs that are poorly absorbed and sensitive to degradation such as macromolecules and biotechnological drugs. Nanoparticles are promising tools for the efficient delivery of these drugs to the gastrointestinal tract. Areas covered:Approaches and techniques for the formulation of drugs, with particular focus on the preparation of polysaccharide nanoparticles obtained by non-covalent interactions. Expert opinion:Polysaccharide-based nanoparticulate systems offer the opportunity to address some of the issues posed by biotechnological drugs, as well as by small molecules, with problems of stability/intestinal absorption, by exploiting the capability of the polymer to establish non-covalent bonds with functional groups in the chemical structure of the API. This area of research will continue to grow, provided that these drug delivery technologies will efficaciously be translated into systems that can be manufactured on a large scale under GMP conditions. Industrial scale-up represents the biggest obstacle to overcome in view of the transformation of very promising results obtained on lab scale into medicinal products. To do that, an effort toward the simplification of the process and technologies is necessary.

Correlation between drug dissolution and resistance to water-induced phase separation in solid dispersion formulations revealed by solid-state NMR spectroscopy.

We aimed to elucidate the dissolution mechanism of solid dispersions (SDs) according to the carrier polymers used. Nifedipine (NIF) and polymers dissolved simultaneously from NIF/Eudragit® S (EUD-S), NIF/Eudragit® L (EUD-L), and NIF/hypromellose (HPMC)/EUD-S spray-dried samples (SPDs). In contrast, NIF dissolved separately from polymers from NIF/HPMC and NIF/HPMC/EUD-L SPDs due to the formation of an amorphous NIF-rich interface. Solid-state NMR spectroscopy indicated that NIF-EUD interactions were stronger than NIF-HPMC interactions. NIF/HPMC SPD exhibited weak interactions; thus, it failed to inhibit phase separation during the dissolution process and control NIF dissolution. The hygroscopicity of SPDs was higher with HPMC mixing and increased substitution ratio of methacrylic acid in EUD. Moreover, solid-state NMR spectroscopy revealed that the NIF-EUD interactions were hindered to a large extent by the absorbed water. During the dissolution process of NIF/HPMC/EUD-L SPD, the introduction of water to the NIF-EUD-L interaction site could induce the phase separation and poor controllability of NIF dissolution. Water-induced phase separation should be considered based on molecular-level characterization to obtain SDs with enhanced drug dissolution. An investigation of the molecular state change caused by the absorbed water using solid-state NMR spectroscopy will be helpful in understanding the dissolution mechanism of SDs.

A Single Hydrogen to Fluorine Substitution Reverses the Trend of Surface Composition Enrichment of Sorafenib Amorphous Solid Dispersion upon Moisture Exposure.

PURPOSE: To reveal the underlying mechanism inducing the opposite trends of surface composition enrichment of spray dried amorphous solid dispersions (ASD) of sorafenib and regorafenib, two compounds only differ in hydrogen to fluorine substitution. METHODS: Sorafenib/PVP and regorafenib/PVP ASDs were prepared by spray drying. Morphology of ASDs was visually inspected and examined by SEM. The surface compositions of ASDs were analyzed by XPS. Glass transition temperature (Tg) of ASDs was determined by DSC. Water vapor sorption isotherms of ASDs were studied by moisture sorption analyzer. Molecular interaction between the drug and the polymer was analyzed by solution NMR. RESULTS: In 10% and 20% drug loading sorafenib/PVP ASDs, short time moisture exposure induced PVP enrichment on the surface, and the appearance of initial ASDs powder became gel-like after water uptake. While in 30% sorafenib/PVP and any regorafenib/PVP ASDs regardless of drug loading, moisture exposure induced surface drug enrichment, while their powder-like appearance and average particle size remained unchanged. Meanwhile, sorafenib/PVP had similar water vapor sorption isotherms as regorafenib/PVP, before and after moisture induced phase separation. NMR study demonstrated a hex atomic ring H-bonding interaction between the drug and PVP, with a 1:1 drug: monomer stoichiometry molar ratio, which persisted in sorafenib/PVP but not regorafenib/PVP system under 95%RH moisture. CONCLUSIONS: Moisture exposure could lead to drug or polymer enrichment on the surface of ASDs, while the viability of drug-polymer interaction persisting in water environment contributed to such surface composition enrichment.

Towards a better understanding of solid dispersions in aqueous environment by a fluorescence quenching approach.

Solid dispersions (SDs) represent an important formulation technique to achieve supersaturation in gastro-intestinal fluids and to enhance absorption of poorly water-soluble drugs. Extensive research was leading to a rather good understanding of SDs in the dry state, whereas the complex interactions in aqueous medium are still challenging to analyze. This paper introduces a fluorescence quenching approach together with size-exclusion chromatography to study drug and polymer interactions that emerge from SDs release testing in aqueous colloidal phase. Celecoxib was used as a model drug as it is poorly water-soluble and also exhibits native fluorescence so that quenching experiments were enabled. Different pharmaceutical polymers were evaluated by the (modified) Stern-Volmer model, which was complemented by further bulk analytics. Drug accessibility by the quencher and its affinity to celecoxib were studied in physical mixtures as well as with in SDs. The obtained differences enabled important molecular insights into the different formulations. Knowledge of relevant drug-polymer interactions and the amount of drug embedded into polymer aggregates in the aqueous phase is of high relevance for understanding of SD performance. The novel fluorescence quenching approach is highly promising for future research and it can provide guidance in early formulation development of native fluorescent compounds.

Influence of lidocaine forms (salt vs. freebase) on properties of drug-eudragit® L100-55 extrudates prepared by reactive melt extrusion.

This study examines the preparation of sustained-release lidocaine polyelectrolyte complex using reactive melt extrusion. Eudragit L100-55 was selected as the ionic polymer. The influence of drug forms (freebase vs. hydrochloride salt) on lidocaine-Eudragit L100-55 interactions, physical stability, and dissolution properties of extrudates was investigated. It was confirmed by DSC, FT-IR and Raman spectroscopy that polyelectrolyte could only form via the acid-base reaction between Eudragit L100-55 and lidocaine freebase. Due to this ionic interaction, the lidocaine extrudate was physically more stable than the lidocaine hydrochloride extrudate during the storage under stressed condition. Drug release from lidocaine extrudate was a function of drug solubility, polymer solubility, drug-polymer interaction, and drug-induced microenvironment pH. At 30% drug loading, extrudate exhibited sustained release in aqueous media at pH 1.2 and 4.5. Due to the alkaline microenvironment pH induced by dissolved lidocaine, Eudragit L100-55 was solubilized and sustained-release was not achieved in water and aqueous media at pH 5.5. In comparison, lidocaine hydrochloride induced an acidic microenvironment. Drug release of lidocaine hydrochloride extrudate was similar at pH 1.2, 4.5, 5.5 and water with drug being released over 10 h. The release of lidocaine hydrochloride from the extrudates in these media was primarily controlled by microenvironment pH. It is concluded that different forms of lidocaine resulted in different drug-polymer interactions and distinctive physicochemical properties of extrudates.

Stabilizers influence drug-polymer interactions and physicochemical properties of disulfiram-loaded poly-lactide-co-glycolide nanoparticles.

AIM: Stabilizers are known to be an integral component of polymeric nanostructures. Ideally, they manipulate physicochemical properties of nanoparticles. Based on this hypothesis, we demonstrated that disulfiram (drug) and Poly-lactide-co-glycolide (polymer) interactions and physicochemical properties of their nanoparticles formulations are significantly influenced by the choice of stabilizers. METHODOLOGY: Electron microscopy, differential scanning calorimetry, x-ray diffraction, Raman spectrum analysis, isothermal titration calorimetry and in silico docking studies were performed. RESULTS & DISCUSSION: Polysorbate 80 imparted highest crystallinity while Triton-X 100 imparted highest rigidity, possibly influencing drug bioavailability, blood-retention time, cellular uptake and sustained drug release. All the molecular interactions were hydrophobic in nature and entropy driven. Therefore, polymeric nanoparticles may be critically manipulated to streamline the passive targeting of drug-loaded nanoparticles.

Surface Enrichment and Depletion of the Active Ingredient in Spray Dried Amorphous Solid Dispersions.

PURPOSE: To study the effects of physicochemical properties of drug and polymer, as well as the drug-polymer interactions, on the surface composition of SDDs. METHODS: Ethanol solutions containing a model drug (IMC, NMP or FCZ) and a model polymer (PVPK12, PVPK30 or PVP-VA) were spray dried, and the surface composition of SDDs was analyzed by XPS. The surface tensions of pure components and their solutions were measured using Wilhelmy plate and/or calculated using ACD/Labs. NMR and DLS were used to obtain the diffusion coefficients of IMC, NMP, PVPK12 and PVPK30 in solvents. Flory-Huggins interaction parameters for selected drug-polymer pairs were obtained using a melting point depression method. RESULTS: Significant surface enrichment or depletion of the drug was observed in SDDs depending on the particular drug-polymer combination. With PVP as the dispersion polymer, IMC and NMP were surface enriched; whereas FCZ, a hydrophilic drug, was surface depleted. With increasing PVP molecular weight, the surface drug concentration increased, and the effect was greater in the NMP/PVP and FCZ/PVP systems than in the IMC/PVP system where strong drug-polymer interaction existed. Changing the polymer from PVP to PVP-VA reduced the surface concentration of the drug. CONCLUSIONS: The surface concentration of a SDD can be significantly different from the bulk concentration. The main results of this work are consistent with the notion that the relative surface tensions control surface enrichment or depletion. Besides, the relative diffusion rates of the components and the strength of their interactions may also affect the surface composition of the SDDs.

Extended release of flurbiprofen from tromethamine-buffered HPMC hydrophilic matrix tablets.

The pH-dependent solubility of a drug can lead to pH-dependent drug release from hydrophilic matrix tablets. Adding buffer salts to the formulation to attempt to mitigate this can impair matrix hydration and negatively impact drug release. An evaluation of the buffering of hydrophilic matrix tablets containing a pH-dependent solubility weak acid drug (flurbiprofen), identified as possessing a deleterious effect on hydroxypropyl methylcellulose (HPMC) solubility, swelling and gelation, with respect to drug dissolution and the characteristics of the hydrophilic matrix gel layer in the presence of tromethamine as a buffer was undertaken. The inclusion of tromethamine as an alkalizing agent afforded pH-independent flurbiprofen release from matrices based on both HPMC 2910 (E series) and 2208 (K series), while concomitantly decreasing the apparent critical effect on dissolution mediated by this drug with respect to the early pseudo-gel layer formation and functionality. Drug release profiles were unaffected by matrix pH-changes resulting from loss of tromethamine over time, suggesting that HPMC inhibited precipitation of drug from supersaturated solution in the hydrated matrix. We propose that facilitation of diffusion-based release of potentially deleterious drugs in hydrophilic matrices may be achieved through judicious selection of a buffering species.

Understanding the generation and maintenance of supersaturation during the dissolution of amorphous solid dispersions using modulated DSC and 1H NMR.

In this study, the dissolution behaviour of dipyridamole (DPM) and cinnarizine (CNZ) spray-dried amorphous solid dispersions (ASDs) using polyvinyl pyrrolidone (PVP) and polyacrylic acid (PAA) as a carrier matrix were evaluated and compared. The drug concentrations achieved from the dissolution of PVP and PAA solid dispersions were significantly greater than the equilibrium solubility of crystalline DPM and CNZ in phosphate buffer pH 6.8 (PBS 6.8). The maximum drug concentration achieved by dissolution of PVP and PAA solid dispersions did not exceed the theoretically calculated apparent solubility of amorphous DPM and CNZ. However, the degree of supersaturation of DPM and CNZ increased considerably as the polymer weight fraction within the solid dispersion increased. In addition, the supersaturation profile of DPM and CNZ were studied in the presence and absence of the polymers. PAA was found to maintain a higher level of supersaturation compared to PVP. The enhanced drug solution concentration following dissolution of ASDs can be attributed to the reduced crystal growth rates of DPM and CNZ at an equivalent supersaturation. We have also shown that, for drugs having high crystallization tendency and weak drug-polymer interaction, the feasible way to increase dissolution might be increase the polymer weight fraction in the ASD. Solution 1H NMR spectra were used to understand dissolution mechanism and to identify drug-polymer interaction. The change in electron densities of proton attached to different groups in DPM and CNZ suggested drug-polymer interaction in solution. The relative intensities of peak shift and nature of interaction between drug and polymer in different systems are different. These different effects suggest that DPM and CNZ interacts in a different way with PVP and PAA in solution which goes some way towards explaining the different polymeric effect, particularly in terms of inhibition of drug recrystallization and dissolution of DPM and CNZ ASDs. These results established that the different drug/polymer interactions in the solid state and in solution give rise to the variation in dissolution profile observed for different systems.

Relationships between mechanical properties and drug release from electrospun fibers of PCL and PLGA blends.

Electrospun nanofibers have the potential to achieve high drug loading and the ability to sustain drug release. Mechanical properties of the drug-incorporated fibers suggest the importance of drug-polymer interactions. In this study, we investigated the mechanical properties of electrospun polycaprolactone (PCL) and poly (D,L-lactic-co-glycolic) acid (PLGA) fibers at various blend ratios in the presence and absence of a small molecule hydrophilic drug, tenofovir (TFV). Young׳s modulus of the blend fibers showed dependence on PLGA content and the addition of the drug. At a PCL/PLGA (20/80) composition, Young׳s modulus and tensile strength were independent of drug loading up to 40wt% due to offsetting effects from drug-polymer interactions. In vitro drug release studies suggested that release of TFV significantly decreased fiber mechanical properties. In addition, mechanically stretched fibers displayed a faster release rate as compared to the non-stretched fibers. Finally, drug partition in the blend fibers was estimated using a mechanical model and then experimentally confirmed with a composite of individually stacked fiber meshes. This work provides scientific understanding on the dependence of drug release and drug loading on the mechanical properties of drug-eluting fibers.

Initial Drug Dissolution from Amorphous Solid Dispersions Controlled by Polymer Dissolution and Drug-Polymer Interaction.

PURPOSE: To identify the key formulation factors controlling the initial drug and polymer dissolution rates from an amorphous solid dispersion (ASD). METHODS: Ketoconazole (KTZ) ASDs using PVP, PVP-VA, HMPC, or HPMC-AS as polymeric matrix were prepared. For each drug-polymer system, two types of formulations with the same composition were prepared: 1. Spray dried dispersion (SDD) that is homogenous at molecular level, 2. Physical blend of SDD (80% drug loading) and pure polymer (SDD-PB) that is homogenous only at powder level. Flory-Huggins interaction parameters (χ) between KTZ and the four polymers were obtained by Flory-Huggins model fitting. Solution (13)C NMR and FT-IR were conducted to investigate the specific drug-polymer interaction in the solution and solid state, respectively. Intrinsic dissolution of both the drug and the polymer from ASDs were studied using a Higuchi style intrinsic dissolution apparatus. PXRD and confocal Raman microscopy were used to confirm the absence of drug crystallinity on the tablet surface before and after dissolution study. RESULTS: In solid state, KTZ is completely miscible with PVP, PVP-VA, or HPMC-AS, demonstrated by the negative χ values of -0.36, -0.46, -1.68, respectively; while is poorly miscible with HPMC shown by a positive χ value of 0.23. According to solution (13)C NMR and FT-IR studies, KTZ interacts with HPMC-AS strongly through H-bonding and dipole induced interaction; with PVPs and PVP-VA moderately through dipole-induced interactions; and with HPMC weakly without detectable attractive interaction. Furthermore, the "apparent" strength of drug-polymer interaction, measured by the extent of peak shift on NMR or FT-IR spectra, increases with the increasing number of interacting drug-polymer pairs. For ASDs with the presence of considerable drug-polymer interactions, such as KTZ/PVPs, KTZ/PVP-VA, or KTZ /HPMC-AS systems, drug released at the same rate as the polymer when intimate drug-polymer mixing was ensured (i.e., the SDD systems); while drug released much slower than the polymer when molecular level mixing or drug-polymer interaction was absent (SDD-PB systems). For ASDs without drug-polymer interaction (i.e., KTZ/HPMC systems), the mixing homogeneity had little impact on the release rate of either the drug or the polymer thus SDD and SDD-PB demonstrated the same drug or polymer release rate, while the drug released slowly and independently of polymer release. CONCLUSIONS: The initial drug release from an ASD was controlled by 1) the polymer release rate; 2) the strength of drug-polymer interaction, including the intrinsic interaction caused by the chemistry of the drug and the polymer (measured by the χ value), as well as that the apparent interaction caused by the drug-polymer ratio (measure by the extent of peak shift on spectroscopic analysis); and 3) the level of mixing homogeneity between the drug and polymer. In summary, the selection of polymer, drug-polymer ratio, and ASD processing conditions have profound impacts on the dissolution behavior of ASDs. Graphical Abstract Relationship between initial drug and polymer dissolution rates from amorphous solid dispersions with different mixing uniformity and drug-polymer interactions.

Engineered microparticles based on drug-polymer coprecipitates for ocular-controlled delivery of Ciprofloxacin: influence of technological parameters.

Ciprofloxacin is a drug active against a broad spectrum of aerobic Gram-positive and Gram-negative bacteria, for the therapy of ocular infections. It requires frequent administrations owing to rapid ocular clearance and it is a good candidate for ocular controlled release formulations. The preparation of such drug release systems is still a challenge. Ionic interactions between ciprofloxacin and the polyelectrolytes chondroitin sulfate or lambda carrageenan result in coprecipitates that can act as microparticulate controlled release systems from which the drug is released after being displaced by the medium's ions. In some formulations, Carbopol was added to improve the mucoadhesive properties. The aim of this research was the study of the influence of the technological parameters of the preparation method of coprecipitates on their particle size, with the goal of achieving particles engineered with a size suitable for the ocular administration. Technological parameters taken into account were: concentration of drug and polymer solutions utilized for the preparation of interaction products, possible use of surfactants (kind and concentration), temperature of the solutions and stirring during the process of preparation of the coprecipitates. Preliminary stability study tests were carried out to further characterize the leader formulation. Particle size in suspensions for ocular drug delivery is a critical parameter influencing the quality of the formulation. The results obtained from this study show that chondroitin sulfate coprecipitates present the best characteristics in terms of particle size suitable for ocular administration. A further improvement of the particle size characteristics has been obtained with the addition of surfactants.

Preparation of an oral thin film containing meclizine hydrochloride: In vitro and in vivo evaluation.

Oral thin film (OTF) is a preparation of postage stamp size, with advantages of flexible, tasty and without water for oral administration. A commercial product (Zentrip®) was developed for people who suffered from motion sickness. In order to improve the mechanical strength of Zentrip®, OTF containing meclizine hydrochloride (MH) was designed and prepared using the solvent casting method. The characteristics of the prepared OTF were evaluated using micrometer, auto stripping tester, DSC, X-ray diffraction. ATR-FTIR was employed to investigate the interaction between drug and polymer. The thickness of MH OTF obtained was 0.116±0.004mm, the tensile strength was 17.37±1.54Nmm(-2) and the drug dissolution at 5min was more than 80% both in distilled water and 0.1mol/L HCL. DSC and XRD showed MH was amorphous in the polymer. ATR-FTIR indicated the MH molecules inserted into the network structure of polymer, which resulted in an inhibition of drug recrystallization. The Cmax of Zentrip® and MH OTF were 1.46±0.44µg/mL and 1.91±0.51µg/mL, and the AUC were 10.38±2.93µgh/mL and 13.74±3.23µgh/mL, respectively. Compared with Zentrip®, MH OTF successfully overcome the weakness of mechanical strength, possessed faster dissolution profile and showed bioequivalence in pharmacokinetics, deserving to a further development.