Mechanistic understanding of the improved drying characteristics and quality attributes of lily (Lilium lancifolium Thunb.) by modified microstructure after pulsed electric field (PEF) pretreatment.

The effects of the non-thermal (pulsed electric field, PEF) and thermal pretreatment (vacuum steam pulsed blanching, VSPB) on the drying kinetics, quality attributes, and multi-dimensional microstructure of lily scales were investigated. The results indicate that both PEF and VSPB pretreatments improved the drying rate compared to untreated lily scales. Specifically, PEF pretreatment reduced the drying time by 29.58 % - 43.60 %, while VSPB achieved a 46.91 % reduction in drying time. PEF treatment facilitated the enhanced leaching of phenols and flavonoids compared to VSPB treated samples, thereby increasing antioxidant activity. The rehydration ratio of the dried lilies was improved with PEF and VSPB treatment, which closely related to the microstructure. Weibull distribution and Page model demonstrated excellent fit for the drying and rehydration kinetics of lily scales, respectively (R2 > 0.993). The analysis of multi-dimensional microstructure and ultrastructure confirmed the variations in moisture migration and phytochemical contents among different treatments. Consequently, this study offers insights into the technological support for the potential of non-thermal pretreatment in fruits and vegetables.

Impact of the Pre-Dehydration and Drying Methods on the Mass Transfer and Quality Attributes of Yak Milk Casein.

Drying is an important preservation method of casein. Traditional natural draining and drying processes have low efficiency, long processing time, and poor product quality, which urgently need to be improved. This study investigated the effects of pre-dehydration intensities (30 N 30 min (PreD1) and 50 N 30 min (PreD2)) and drying methods (including pulsed vacuum drying (PVD), infrared drying (IRD), and hot air drying (HAD)) on the drying kinetics, drying modeling, and quality of yak milk casein. These findings reveal that PreD2 and PVD both had a positive impact on shortening the drying time. Compared to other combined treatments, PreD2-PVD had the shortest drying time of 6 h. The Midilli-Kucuk mathematical model effectively predicted the drying of casein. The yak milk casein powder treated with PreD2-PVD possessed a higher content of gross compositions, superior color, lower levels of fat oxidation and 5-hydroxymethylfurfural (5-HMF), and higher emulsifying activity index (EAI) and emulsion stability index (ESI) values. Overall, combining pre-dehydration with PVD proved effective in improving the drying rate and maintaining a good quality of yak milk casein, showing promising potential for industrial applications.

Preserving nutrient content in red cabbage juice powder via foam-mat hybrid microwave drying: Application in fortified functional pancakes.

Red cabbage, a highly nutritious cool-season cruciferous vegetable, is rich in anthocyanins; however, the instability of anthocyanins during processing and storage poses challenges. This study aimed to optimize the foam-mat drying process of red cabbage juice (RCJ) with a high anthocyanin content using a hybrid microwave hot air-drying system (MW-HAD) as a dehydration method compared to conventional techniques (HAD) using response surface methodology (RSM). Additionally, the produced red cabbage juice powder (RCJP) was used to enrich the pancake formulation. The developed model exhibited a high degree of reliability with optimal conditions and was determined for microwave power, temperature, foaming agent carboxymethylcellulose (CMC), and egg white protein (EWP) as 360 W, 60°C, 0.3%, and 1.2%, respectively. Moisture content (%) was decreased from 93.47 to 8.62 at optimum process conditions. In comparison to the control (60°C), foam mat drying with the MW-HAD hybrid system reduced the drying time (DT) by more than 90.9% due to the higher drying rate, while many physicochemical properties, especially total anthocyanin content (TAC), were better preserved. Utilization of RCJP in the production of anthocyanin-rich functional pancakes resulted in enhanced nutritional qualities compared to control pancakes with increased protein (35.07%), total phenolic (75.8%), dietary fiber (82.9%), and anthocyanin content (100%). In conclusion, MW-HAD demonstrates significant potential as a promising drying method to reduce the DT and preserve the physicochemical properties of RCJP. Furthermore, the application of the optimized RCJP in anthocyanin-rich functional pancakes highlights improved nutritional qualities, making a substantial contribution to the advancement of functional foods.

Quality and Process Optimization of Infrared Combined Hot Air Drying of Yam Slices Based on BP Neural Network and Gray Wolf Algorithm.

In this paper, the effects on drying time (Y1), the color difference (Y2), unit energy consumption (Y3), polysaccharide content (Y4), rehydration ratio (Y5), and allantoin content (Y6) of yam slices were investigated under different drying temperatures (50-70 °C), slice thicknesses (2-10 mm), and radiation distances (80-160 mm). The optimal drying conditions were determined by applying the BP neural network wolf algorithm (GWO) model based on response surface methodology (RMS). All the above indices were significantly affected by drying conditions (p < 0.05). The drying rate and effective water diffusion coefficient of yam slices accelerated with increasing temperature and decreasing slice thickness and radiation distance. The selection of lower temperature and slice thickness helped reduce the energy consumption and color difference. The polysaccharide content increased and then decreased with drying temperature, slice thickness, and radiation distance, and it was highest at 60 °C, 6 mm, and 120 mm. At 60 °C, lower slice thickness and radiation distance favored the retention of allantoin content. Under the given constraints (minimization of drying time, unit energy consumption, color difference, and maximization of rehydration ratio, polysaccharide content, and allantoin content), BP-GWO was found to have higher coefficients of determination (R2 = 0.9919 to 0.9983) and lower RMSEs (reduced by 61.34% to 80.03%) than RMS. Multi-objective optimization of BP-GWO was carried out to obtain the optimal drying conditions, as follows: temperature 63.57 °C, slice thickness 4.27 mm, radiation distance 91.39 mm, corresponding to the optimal indices, as follows: Y1 = 133.71 min, Y2 = 7.26, Y3 = 8.54 kJ·h·kg-1, Y4 = 20.73 mg/g, Y5 = 2.84 kg/kg, and Y6 = 3.69 µg/g. In the experimental verification of the prediction results, the relative error between the actual and predicted values was less than 5%, proving the model's reliability for other materials in the drying technology process research to provide a reference.

A High-Efficiency Radio-Frequency-Assisted Hot-Air Drying Method for the Production of Restructured Bitter Melon and Apple Chips.

Nowadays, consumers are increasingly demanding processed food products with high levels of beneficial components. Bitter melon and apple are both nutritious foods rich in bioactive compounds. In this study, restructured bitter melon and apple chips were processed using four drying techniques: hot-air drying with/without exhaust air recirculation (EAR), and radio-frequency-assisted hot-air drying (RFHAD) with/without EAR. The drying characteristics, effective moisture diffusivity (Deff), specific energy consumption (SEC), total energy consumption (TEC), and some selected quality characteristics of the dehydrated chips were evaluated. The experimental results show that the application of radio frequency (RF) energy significantly facilitates water evaporation in the drying material, resulting in a significant (p < 0.05) reduction of drying duration by 31~39% over the experimental test parameters. The higher Deff values obtained from RFHAD and RFHAD + EAR were 6.062 × 10-9 to 6.889 × 10-9 m2/s, while lower SEC values ranged from 301.57 to 328.79 kW·h/kg. Furthermore, the dried products possessed better or fairly good quality (such as a lower color difference of 5.41~6.52, a lower shrinkage ratio of 18.24~19.13%, better antioxidant capacity, higher chlorophyll, total flavonoid, and total phenolic content, a lower polyphenol oxidase activity of 49.82~52.04 U·min-1g-1, smaller diameter and thickness changes, and a lower hardness of 27.75~30.48 N) compared to those of hot-air-dried chips. The combination of RF-assisted air drying and partial recirculating of dryer exhaust air achieved the highest saving in TEC of about 12.4%, along with a lower moisture absorption capacity and no deterioration of product quality attributes. This drying concept is therefore recommended for the industrial drying of several food materials.

Development of thermoultrasound assisted blanching to improve enzyme inactivation efficiency, drying characteristics, energy consumption, and physiochemical properties of sweet potatoes.

Thermoultrasound (USB) as a promising alternative to traditional hot water (HWB) blanching was employed to blanch sweet potatoes and its influence on enzyme activity, drying behavior, energy consumption and physiochemical properties of sweet potatoes were investigated. Results showed that successive increases in blanching temperature and time resulted in significant (p < 0.05) decreases in PPO and POD activities. Compared to HWB, USB led to more effective drying by promoting texture softening, moisture diffusion, microstructure alterations, and microchannels formation, which significantly reduced energy consumption and improved the overall quality of the dried sample. Specifically, USB at 65 °C for 15 min improved water holding capacity and ABTS, while USB at 65 °C for 30 min improved color (more red and yellow), total phenolic content, total carotenoid content, and DPPH. Unfortunately, blanching process showed detrimental effects on the amino acid composition of dried samples. Overall, the development of thermoultrasound assisted blanching for sweet potatoes has the potential to revolutionize the processing and production of high-quality sweet potato products, while also improving the sustainability of food processing operations.

Evaluation of the Effect of Ultrasonic Pretreatment on the Drying Kinetics and Quality Characteristics of Codonopsis pilosula Slices Based on the Grey Correlation Method.

Ultrasonic (US) maltreatment was performed before the vacuum far-infrared drying (VFID) of Codonopsis pilosula (CP) slices to investigate the effects of different US parameters on the drying characteristics and nutrients of CP slices. The grey correlation method with relative correlation degree (ri) as the evaluation measure was used to construct a model for the evaluation of the pretreatment quality of CP and to determine the optimal pretreatment conditions. The results showed that with the increase in US frequency and power, the drying rate increased. Under the conditions of US power of 180 W, frequency of 60 kHz and a pre-treatment time of 30 min, the drying time reduced by 28.6%. The contents of polysaccharide and syringin in dried CP slices pretreated by US increased by 14.7% and 62.0%, respectively, compared to the non-pre-treated samples, while the total flavonoid content decreased by 10.0%. In terms of colour, pretreatment had a certain protective effect on the red colour of dried products. The highest relative correlation (0.574) and the best overall quality of performance were observed at 180 W, 60 kHz and 30 min. Overall, US technology is suitable for the pretreatment processing of CP, which is of great significance to the drying of CP.

Post-harvest ripening affects drying behavior, antioxidant capacity and flavor release of peach via alteration of cell wall polysaccharides content and nanostructures, water distribution and status.

Effect of post-harvest ripening on cell wall polysaccharides nanostructures, water status, physiochemical properties of peaches and drying behavior under hot air-infrared drying was evaluated. Results showed that the content of water soluble pectins (WSP) increased by 94 %, while the contents of chelate-soluble pectins (CSP), Na2CO3-soluble pectins (NSP) and hemicelluloses (HE) decreased during post-harvest ripening by 60 %, 43 %, and 61 %, respectively. The drying time increased from 3.5 to 5.5 h when the post-harvest time increased from 0 to 6 days. Atomic force microscope analysis showed that depolymerization of hemicelluloses and pectin occurred during post-harvest ripening. Time Domain -NMR observations indicated that reorganization of cell wall polysaccharides nanostructure changed water spatial distribution and cell internal structure, facilitated moisture migration, and affected antioxidant capacity of peaches during drying. This leads to the redistribution of flavor substances (heptanal, n-nonanal dimer and n-nonanal monomer). The current work elucidates the effect of post-harvest ripening on the physiochemical properties and drying behavior of peaches.

Hot Air Impingement Drying Enhanced Drying Characteristics and Quality Attributes of Ophiopogonis Radix.

The effects of drying temperature and air velocity on the drying characteristics, color, bioactive compounds, rehydration ratio, and microstructure of Ophiopogonis Radix during hot air impingement drying (HAID) were explored in the current study. The experimental results showed that the drying temperature and air velocity had a significant impact on the drying characteristics and quality attributes of dried products except for the rehydration ratio. The drying time decreased from 720 to 240 min with the increase of drying temperature from 50 to 70 °C. Increasing the air velocity from 6 to 12 m/s enhanced the drying process of Ophiopogonis Radix, while the extension of air velocity to 15 m/s lowered the drying rate. The samples that were dried at a lower drying temperature obtained lower color difference. Properly increasing the drying temperature or air velocity could increase the total polysaccharide and flavonoid contents of dried products. Additionally, a back-propagation neural network (BPNN) model was developed to predict the moisture ratio of Ophiopogonis Radix during the drying process. The optimal BPNN with 3-11-1 topology were obtained to predict the moisture ratio of Ophiopogonis Radix during HAID and performed with an acceptable performance.

Evaluation of the effect of ultrasonic pretreatment on vacuum far-infrared drying characteristics and quality of Angelica sinensis based on entropy weight-coefficient of variation method.

This study investigated the effects of ultrasonic pretreatment time, ultrasonic power, and ultrasonic frequency on the drying characteristics and physicochemical quality of Angelica sinensis, and the physicochemical quality content was selected as the evaluation index, the entropy weight-coefficient of variation method was used to calculate the coupling weight and comprehensive score, and the weighted Technique for Order Preference by Similarity to Ideal Solution method was used to verify the evaluation model. The results showed that the drying rate of materials after ultrasonic treatment was increased by 22.48% to 93.26%, and the effective moisture diffusivity was in the range between 4.6831 × 10-9 and 7.0722 × 10-9  m2 /s, and the drying activation energy was 31.90 kJ/mol. The energy consumption decreased by 5.75% to 25.88%. Compared with the samples without the ultrasonic pretreatment, the chlorogenic acid, ferulic acid, senkyunolide H, senkyunolide I, 3-butenylphthalide, ligustilide, polysaccharides, total phenolic content, total flavonoid content, and antioxidant capacity of A. sinensis were increased after ultrasonic treatment, and the color, rehydration ratio, shrinkage ratio, and microstructure of dried products were improved significantly (p < 0.05). However, the quality of the dried products decreased after ultrasonic treatment for 40 min with an ultrasonic frequency of 60 kHz, and the internal tissue structure was destroyed. In summary, ultrasonic pretreatment at low frequency and high power can significantly increase the drying rate and improve the physicochemical quality of dried products.

Effects of Different Drying Methods on Drying Characteristics and Quality of Glycyrrhiza uralensis (Licorice).

Large amounts of waste result from licorice mold rot; moreover, prompt drying directly influences product quality and value. This study compared various glycyrrhiza drying methods (Hot air drying (HAD), infrared combined hot air drying (IR-HAD), vacuum freeze drying (VFD), microwave vacuum drying (MVD), and vacuum pulsation drying (VPD)) that are used in the processing of traditional Chinese medicine. To investigate the effects of various drying methods on the drying characteristics and internal quality of licorice slices, their color, browning, total phenol, total flavonoid, and active components (liquiritin and glycyrrhizic acid) were chosen as qualitative and quantitative evaluation indices. Our results revealed that VFD had the longest drying time, but it could effectively maintain the contents of total phenol, total flavonoid, and liquiritin and glycyrrhizic acid. The results also showed that VFD samples had the best color and the lowest degree of browning, followed by HAD, IR-HAD, and VPD. We think that VFD is the best approach to ensure that licorice is dry.

Improving Drying Characteristics and Physicochemical Quality of Angelica sinensis by Novel Tray Rotation Microwave Vacuum Drying.

In order to improve the shortcomings of uneven heating of traditional microwave drying and to maximally maintain food quality after harvest, a rotary microwave vacuum drying equipment was fabricated and used for drying experiments on Angelica sinensis to explore the effects of drying temperature, slice thickness, and vacuum degree on drying characteristics, physicochemical quality, and microstructure of dried Angelica sinensis products. The results showed that microwave vacuum drying can significantly shorten the drying time and improved the drying efficiency. Six different mathematical models were investigated and the Midilli model was the best-fitted model for all samples (R2 = 0.99903, Pearson's r = 0.99952), and drying methods had various effects on different indexes and were confirmed by Pearson's correlation analysis and principal component analysis. The optimal process parameters for microwave vacuum drying of Angelica sinensis were determined by entropy weight-coefficient of variation method as 45 °C, 4 mm, -0.70 kPa. Under this condition, well preserved of ferulic acid, senkyunolide I, senkyunolide H, ligustilide, total phenols and antioxidant activity, bright color (L* = 77.97 ± 1.89, ΔE = 6.77 ± 2.01), complete internal organizational structure and more regular cell arrangement were obtained in the samples. This study will provide a theoretical reference for the excavation of the potential value and the development of industrial processing of Angelica sinensis.

Structural change kinetics, drying characteristics, antioxidant properties, and the correlation between quality parameters of dried duckweed (Wolffia arrhiza (L.) Wimm) affected by different levels of microwave power.

BACKGROUND: Duckweed is considered as a future food material due to its fast growth, high yield, high nutritional value, and low impact on land use. However, in its fresh form, it has high moisture content (95% wet basis), resulting in a short shelf life. In this study, microwave drying (MWD) was conducted to produce a shelf-stable duckweed with minimal loss of quality. Drying characteristics and quality aspects of dried duckweed were assessed. Reaction order kinetics, including zero and first order, was applied to describe structural changes during drying process. Hierarchical cluster analysis (HCA) was used to select the appropriate drying conditions. RESULTS: Of five drying models, the Midilli-Kucuk model was the one that best described the drying process. Drying at high microwave power could reduce energy consumption and increase energy efficiency. Increasing both microwave power and drying time increased the structural shrinkage rate as described by first-order reaction kinetics. High correlations among quality parameters were observed using Pearson's correlation. Drying treatments were differentiated into two main clusters by HCA and the results showed that MWD at 720 and 900 W provided samples that were closer in terms of quality to a freeze dried sample (the positive control) than samples that had been subjected to MWD at 450 W. CONCLUSION: Drying behaviors of duckweed were well-described by the Midilli-Kucuk model. Microwave drying at 900 W gave the lowest energy consumption and displayed the most efficient use of energy. The first-order equation could be used effectively to describe the structural changes in the duckweed. Microwave drying at 720 and 900 W was the appropriate drying condition according to the HCA classification. © 2023 Society of Chemical Industry.

Drying characteristics of thin layer of potato (Solanum tuberosum): experimental and computational studies.

Solar drying is a renewable energy-based technique which is widely used for food preservation purpose. In this study, various drying characteristics of the solar-dried Solanum tuberosum samples of different thicknesses have been investigated at variable climate condition of Lucknow. A mathematical model has also been developed to validate experimental results to predict the drying rate, free moisture content, and other parameters. Pre-treatment of the food samples was also done before the experimental runs on the fabricated solar dryer. Global radiation has also been monitored during the study to correlate the heat transfer rate in inner and outer sides of the solar drying chamber. SEM analysis has also been done to analyze the surface morphology of solar-dried samples. All solar dried food samples have uniformly heated. There was no hot-spot condition present on the surface of the samples. The drying efficiency and payback period of the fabricated solar dryer have also been calculated as 22.9% and 1.42 years, respectively. Model data have been found in good agreement with the experimental data within a 5% error. This modified model can be used for different agro-based food materials such as carrot, kiwifruit, and yam.

Experimental investigation of different-shaped microwave-heated potatoes: thermal and quality characteristics analysis for food preservation.

Food materials are consumed for nutritional purposes in the form of fruits, vegetables, plants, and meat. These contain proteins, carbohydrates, and other useful nutritional compounds and these processed foods are a rich source of nutrition. The demand and supply of hygienic food for a particular population is possible only by food preservation. It can be done by various methods such as drying, freezing, chilling, chemical preservation, and pasteurization. Drying is a method of food preservation and it can be done by solar drying, microwave heating, vacuum drying, and some other methods. Microwave heating is a fast-drying method. It utilizes electrical energy to generate heat energy. The domestic microwave oven is not harmful but a commercial-level oven may be little bit harmful, when operated on high frequency. Potato is used as a sample material with different shapes such as slab, cylindrical, and spherical. The microwave oven has been operated at four different microwave powers such as 100 W, 300 W, 600 W, and 800 W. Slab-shaped (30 °C), cylindrical-shaped (31.5 °C), and spherical-shaped (30.5 °C) food materials achieved maximum temperatures of 83.9 °C, 110.6 °C, and 146.1 °C respectively. The temperature variations and drying characteristics of the food samples have been monitored. An oven has achieved maximum drying efficiency of 25.65% with a slab-shaped sample. For the detection of the cracks and chemical compositions in the food samples, SEM with EDS analysis has been performed. Economic analysis of microwave oven has also been done and payback period has been found as 3.27 years.

Recent developments in radio frequency drying for food and agricultural products using a multi-stage strategy: a review.

Radio frequency (RF) drying is an emerging technology for food and agricultural products, holding features of rapid, uniform, stable, and volumetric heating, high energy efficiency, and moisture leveling. However, the RF drying with a single stage commonly has drawbacks of unexpected product quality, non-uniform moisture distribution, and prolonged drying time. The multi-stage drying approach could overcome the shortcomings of one-stage strategy accordingly by applying different drying methods or operating parameter values in each phase separately. This review describes the principle of RF heating, presents the typical systems and superiorities of RF drying, and provides a comprehensive overview on recent development in applications of both the one-stage and the multi-stage RF drying, and analysis of drying characteristics and merits for different types of the two-stage strategy. This review finally proposes recommendations for future studies in improving and optimizing the existing RF drying protocols and scaling up them to industrial applications.

Study of activation energy and moisture diffusivity of various dipping solutions of ivy gourd using solar dryer.

The study is aimed to enhance the shelf life of ivy gourd through the solar drying method in open, forced, and natural convection mode. Ivy gourd is treated as the primary agent to prepare medicines and the stems, leaves and flowers are used to cure diseases related to diabetics, ulcer and skin. The normal shelf life is 2-3 days and it can be increased up to 6 months with an effective drying process. The experiment is intended to find the best drying process among the open, natural, and forced convection mode with an initial dipping method with ascorbic acid, lemon juice, sugar solution, honey solutions individually, and a control sample (without dipping). A 3 kg sample of ivy gourd is dipped in 10 g/L of each of the solutions and it is used for the three drying processes individually. The obtained results are indicating that the forced convection method for ascorbic acid is best among the other drying method, with the highest moisture diffusivity is 7.88 × 10-8 m2/s and the lowest activation energy of 21.12 kJ/mol. The lemon juice sample is found to have better sensory appeal in terms of colour (darkness) and shrinkage followed by honey, ascorbic acid, and control sample, whereas the honey-dipped sample offers a better taste followed by lemon juice-dipped samples, control, and ascorbic acid-dipped samples, respectively. The influence of dipping solution and drying mechanisms on the functionalities of drying are discussed with suitable illustrations.

Hot Air Drying of Seabuckthorn (Hippophae rhamnoides L.) Berries: Effects of Different Pretreatment Methods on Drying Characteristics and Quality Attributes.

Seabuckthorn berries are difficult to dry because the outermost surface is covered with a dense wax layer, which prevents moisture transfer during the drying process. In this study, uses of ultrasonic-assisted alkali (UA), pricking holes in the skin (PH) and their combination (UA + PH) as pretreatment methods prior to hot air drying and their effects on drying characteristics and quality attributes of seabuckthorn berries were investigated. Selected properties include color, microstructure, rehydration capacity, as well as total flavonoids, phenolics and ascorbic acid contents. Finally, the coefficient of variation method was used for comprehensive evaluation. The results showed that all pretreatment methods increased the drying rate; the combination of ultrasonic-assisted alkali (time, 15 min) and pricking holes (number, 6) (UA15 + PH6) had the highest drying rate that compared with the control group, the drying time was shortened by 33.05%; scanning electron microscopy images revealed that the pretreatment of UA could dissolve the wax layer of seabuckthorn berries, helped to form micropores, which promoted the process of water migration. All the pretreatments reduced the color difference and increased the lightness. The PH3 samples had the highest value of vitamin C content (54.71 mg/100 g), the UA5 and PH1 samples had the highest value of total flavonoid content (11.41 mg/g) and total phenolic content (14.20 mg/g), respectively. Compared to other pretreatment groups, UA15 + PH6 achieved the highest quality comprehensive score (1.013). Results indicate that UA15 + PH6 treatment is the most appropriate pretreatment method for improving the drying characteristics and quality attributes of seabuckthorn berries.

Response Surface Optimization of Solar Drying Conditions and the Effect on the Quality Attributes and Drying Characteristics of Qula Casein.

The objective of this study was to investigate the potential application of a mixed-mode solar dryer to Qula dehydration in the Qinghai-Tibet Plateau of China. A three-factor five-level central composite rotatable design (CCD) of the response surface methodology (RSM) was employed to evaluate the influences of drying process variables on quality attributes in terms of lipid oxidation [peroxide (POV) and thiobarbituric acid reactive substance (TBARS)] and Maillard reaction (5-hydroxymethylfurfural, 5-HMF). The impact of drying temperature (30−50 °C), material thickness (5−15 mm), and wind velocity (0.4−1.4 m/s) on the color, POV, TBARS, and 5-HMF of Qula were studied. Optimum operating conditions were found to be a temperature of 43.0 °C, material thickness of 11.0 mm, and wind velocity of 1.0 m/s based on the minimum of POV, TBARS, and 5-HMF. In this condition, the values of POV, TBARS, and 5-HMF were 0.65 meq/kg, 0.516 mg/kg, and 4.586 mg water/L, respectively, which are significantly lower than for drying of Qula by open sun-drying (p < 0.05). Compared with open sun-drying, the drying time of Qula by solar drying was shortened by 61.5%. The results indicate that the mixed-mode solar dryer is a feasibility drying technology for Qula and could effectively improve the quality of products.

Effect of Osmotic Dehydration Pretreatment on the Drying Characteristics and Quality Properties of Semi-Dried (Intermediate) Kumquat (Citrus japonica) Slices by Vacuum Dryer.

The effect of osmotic dehydration (OD) pretreatments at different temperatures and immersion times on drying characteristics, total phenolic content (TPC), total antioxidant activity (TAA) (DPPH and CUPRAC methods), and color of kumquat slices dried under vacuum conditions (70 °C-100 mbar) was investigated. The OD pretreatment was performed in a sucrose solution (45 °Bx) at the temperatures of 40 and 50 °C and immersed at times of 30, 60, and 90 min. OD before vacuum drying decreased the total required drying time by up to 70 min compared to the control non-pretreated samples. Page, Modified Page, Henderson Pabis, and Two Terms Exponential models were found to satisfactorily describe the drying behavior of thin layer dried kumquat slices. The minimum and maximum values of effective moisture diffusivity (Deff) for semi-dried kumquat slices were 5.04 × 10-8 to 7.19 × 10-8, respectively. OD treatments induced a decline in TPC (5.30-33.92%) and TAA (23.63-59.34% and 4.17-31.67% for DPPH and CUPRAC assays, respectively) of kumquat slices. It was observed that OD pre-treatment can decrease the gross drying time, and make the color and sensorial attributes of dried kumquats better.