Mechanics of dynamic compression plate application in fracture fixation.

BACKGROUND: Dynamic compression plating is a fundamental type of bone fracture fixation used to generate interfragmentary compression. The goal of this study was to investigate the mechanics of the surgical application of these plates, specifically how plate prebend, screw location, fracture gap, and applied torque influence the resulting compressive pressures. METHODS: Synthetic bones with transverse fractures were fixed with locking compression plates. One side of the fracture was fixed with locking screws. On the other side of the fracture, a nonlocking screw was inserted eccentrically to induce interfragmentary compression. A pressure mapping sensor within the fracture gap was used to record the resulting pressure distribution. Plate prebends of 0 mm, 1.5 mm, and 3 mm were tested. Three locations of the eccentric screw, four levels of screw torque, and two initial fracture gap conditions also were tested. FINDINGS: With increasing plate prebend, fracture compression pressures shifted significantly toward the far cortex; however, compression force decreased (P < 0.05). The 1.5 mm prebend plate resulted in the greatest contact area. Increasing screw torque generally resulted in greater fracture compression force. The introduction of a 1 mm fracture gap at the far cortex prior to dynamic compression resulted in little or no fracture compression. INTERPRETATION: The model showed that increasing plate prebend results in an increasing shift of fracture compression pressures toward the far cortex; however, this is accompanied by decreases in compressive force. Initial fracture gaps at the far cortex can result in little or no compression.

Precontoured dynamic compression plate using patient-specific 3D-printed models in minimally invasive surgical technique for midshaft clavicle fractures.

INTRODUCTION: This study introduced a novel approach for the treatment of midshaft clavicle fractures, utilizing patient-specific 3D-printed models for accurate preoperative contouring of dynamic compression plates (DCPs) and an alternative minimally invasive plate osteosynthesis (MIPO) technique with precontoured DCPs through small vertical separated incisions. PATIENT AND METHODS: Mirror image 3D clavicular models were reproduced from 40 patients with acute displaced midshaft clavicle fractures who underwent MIPO using precontoured DCPs inserted through small, vertical separated incisions. Exclusion criteria included patients with open fractures, pathological fractures, ipsilateral limb injury, skeletal immature patients, and those who had previous clavicle fractures or surgery. Postoperative evaluation was conducted using clinical and radiographic review. The Constant-Murley and American Shoulder and Elbow Surgeons Shoulder Scores were used for clinical evaluations, and the Patient and Observer Scar Assessment Scale was used to assess surgical scars. RESULTS: The average time to union of all fractures was 12.88 weeks (range, 8-15) without loss of reduction. The patient-specific precontoured DCPs fitted well in all cases, with fracture consolidation and minimal three cortical sides connecting the fracture fragment. No hardware prominence and skin complications occurred, and clinical evaluation showed no existing difference compared with the contralateral sides. The average Constant-Murley and American Shoulder and Elbow Surgeons Shoulder Scores were 96.33 ± 3.66 and 93.26 ± 5.15, respectively. Two patients requested their implant removal, and scar qualities were satisfactory. CONCLUSIONS: Our study demonstrated that the use of a patient-specific precontoured DCP, in combination with 3D printing technology, provides accurate preoperative planning, effective fracture reduction, and improved postoperative outcomes in displaced midshaft clavicle fractures. The MIPO with a patient-specific precontoured DCP through separated vertical incisions along the Langer's lines appears to be a promising option, regarding appearance, avoiding associated complications, and obviating the need for reoperation. These results suggest that this technique has merit and can be a viable option for the treatment of midshaft clavicle fractures.

Is double-crossed retrograde elastic stable intramedullary nailing an alternative method for the treatment of diaphyseal fractures in the adult humerus?

BACKGROUND: The aim of this study was to compare two techniques for the surgical treatment of diaphyseal fractures in the adult humerus: double-crossed retrograde elastic stable intramedullary nailing (DCR-ESIN) and limited-contact dynamic compression plate (LC-DCP). METHODS: This was a retrospective study conducted at a single hospital. We included 122 patients with diaphyseal fractures of the humerus who had received DCR-ESIN or LC-DCP from January 2011 to January 2017. We compared union rates, union times, disabilities of the arm, shoulder, and hand (DASH) scores at the postoperative 1-year follow-up, and complications between the two groups. RESULTS: Plating management was performed in 63 patients, while DCR-ESIN was performed in 59 patients. The union rate was higher in the DCR-ESIN group than in the LC-DCP group (100% vs. 90.5%; p = 0.052). The union time was shorter in the DCR-ESIN group than in the LC-DCP group (12.0 weeks vs. 14.8 weeks; p < 0.001). The intraoperative blood loss and operative time were less in the DCR-ESIN group than in the LC-DCP group (76.4 min vs. 129.5 min; p < 0.001; 60.9 ml vs. 244.8 ml; p < 0.001, respectively). The DCR-ESIN had superior results for the rate of overall complications (p = 0.006). At the 1-year follow-up, the DCR-ESIN group had better DASH scores than the LC-DCP group (p = 0.014). CONCLUSIONS: The DCR-ESIN technique, used to treat diaphyseal fractures of the humerus, has shorter operative times, less intra-operative blood loss, shorter union times, and better functional outcomes at 1-year follow-up than the LC-DCP technique. DCR-ESIN may be an alternative method for the surgical treatment of diaphyseal humeral fractures in adults.

Bending properties of additively manufactured commercially pure titanium (CPTi) limited contact dynamic compression plate (LC-DCP) constructs: Effect of surface treatment.

Additive manufacturing of metallic materials, a layer-wise manufacturing method, is currently gaining attention in the biomedical industry because of its capability to fabricate complex geometries including customized parts fitting to patient requirements. However, one of the major challenges hindering the full implementation of additively manufactured parts in safety-critical applications is their poor mechanical performance under cyclic loading. This study investigated both quasi-static bending properties (bending stiffness, bending structural stiffness, and bending strength) and bending fatigue properties of additively manufactured (AM) commercially pure titanium (CPTi) limited contact dynamic compression plate (LC-DCP) constructs based on ASTM International standard for metallic bone plates (ASTM F382). In addition, the effect of post surface treatment methods including single shot-peened (SP), dual shot-peened (DP), and chemically assisted surface enhancement (CASE) on bending fatigue performance was also evaluated. Results indicated that bending stiffness and bending structural stiffness of AM CPTi LC-DCPs are comparable to conventionally manufactured (CM) counterparts; however, the bending strength of AM CPTi LC-DCPs is lower than CM counterparts. While the fatigue strength of as-built AM CPTi LC-DCPs is lower compared to the CM counterparts, AM CPTi LC-DCPs after post surface treatments (SP, DP, and CASE) exhibit statistically comparable fatigue strength to the CM CPTi LC-DCPs.

Comparison of forces generated using compression plating versus a magnetic lengthening nail in a sawbones femur model.

BACKGROUND: The purpose of this study is to compare compression generated by a Precice magnetic lengthening intramedullary nail and a 5.0 mm limited contact dynamic compression plate. METHODS: Transverse osteotomy sites were created in the femoral shaft of ten Sawbones fourth generation composite femurs. Antegrade 10-degree trochanteric Precice nails and 8-hole, 5.0 mm plates were used for fixation. The plates were compressed by placing a neutral screw and three eccentrically drilled compression screws on alternating sides of the osteotomy. Average compression and distribution of compression were compared, and P-values <0.05 were considered statistically significant. FINDINGS: The Precice nail generated an average of 2.38 megapascal across the osteotomy sites. The plate generated an average of 0.70 megapascal (P < 0.001) with the initial compression screw, 0.93 megapascal (P < 0.001) after the second screw, and 1.04 megapascal (p < 0.001) after the final screw. The distribution of compression was assessed utilizing a polar transformation to compare pressure values. We found that the distribution of compression was more circumferentially uniform in the Precice nail group (P = 0.046). INTERPRETATION: This study demonstrates that an electromagnetic intramedullary device is capable of generating significantly higher compression, in a more uniform distribution, than a 5.0 mm limited contact dynamic compression plate in a Sawbones model. The results indicate that electromagnetic intramedullary nail systems may be an ideal alternative to compression plating for treatment of at-risk fractures, nonunions, delayed unions, and intercalary allograft reconstruction.

Bilateral symmetrical pronation type of Galeazzi fracture following high-speed motor traffic crash: A case report.

INTRODUCTION AND IMPORTANCE: Bilateral Galeazzi fracture is a rare occurrence following trauma. Anatomical reduction of the fracture and the distal radioulnar joint is mandatory for a good outcome. CASE PRESENTATION: We present a 24-year-old patient with bilateral Galeazzi fracture following a high-velocity motorbike accident. CLINICAL DISCUSSION: A motorcyclist presented with bilateral painful deformed forearms following a motor traffic crash. Radiographs of bilateral forearms showed bilateral symmetrical supination type (Type II) Galeazzi fractures. He has undergone open reduction and internal fixation of the bilateral radii. Bilateral distal radioulnar joints reduced spontaneously when the fracture of the radius reduced anatomically. The reduction of the fracture and the distal radioulnar joints was confirmed by postoperative radiographs. CONCLUSION: Bilateral Galeazzi fracture is a rare entity following high-velocity injury. Disruption of the distal radial ulnar joint needs to address to achieve a good outcome. An awareness of this entity, early detection, and intervention of this condition may help to regain the full function of the forearm.

Laterally applied single bone plate option for fixation of complete diaphyseal fracture of a third metatarsal bone in a circus work pony.

BACKGROUND: Complete fractures of the third metacarpal/metatarsal bones (Mc/t3) are not common, but can occur in various situations and all types of horses, contributing for approximately one third of all long bone fractures in the horse, mostly related to external trauma or to high energy injuries. To stabilize Mc/t3 fractures in the horse, conservative management with walking casts and/or open reduction and internal fixation techniques are referred in the scientific literature, these last one generally by double platting application to bone surface in 90 degrees. In the present case will be described a Mt3 complete diaphyseal fracture stabilization on an adult pony from a circus by applying only one bone plate. This work pony could return to its previous activity fully recovered 3 months after fracture stabilization. CASE DESCRIPTION: A 7-year-old, male, Shetland pony (103 kg), used for performance work at a circus was admitted to the Veterinary Teaching Hospital of University of Tras-os-Montes and Alto Douro, presenting on lateral recumbency after being struck by a truck. On physical examination, a penetrating wound of small dimension was detected at the medial aspect of the right hindlimb. After radiographic examination, a complete diaphyseal fracture with slight obliquity of the right Mt3 was confirmed. The owner opted for surgical repair thus fracture stabilization was achieved by the placement of just a single 8-hole 4.5 mm broad dynamic compression plate applied to the lateral face of Mt3 in compression function with 7 cortical screws (4.5 mm). Post-operatively a full limb cast was performed and maintained for 4 weeks, while the animal was kept under movement limitation at the hospital facilities for this period of time although the animal stayed until his full recovery 3 months' post-surgery. CONCLUSION: A complete recovery was achieved and the animal returned to the previous level of exercise without any significant postoperative complications or degree of lameness. In the authors knowledge, this is the first case report where stabilization of a complete Mt3 diaphyseal fracture was attain using a single compression plate contoured to the lateral face of the bone, instead of double plating, on an adult work pony from a circus subjected to a very demanding and intense physical activity.

Feasibility of the Inner-Side-Out Use of the LC-DCP for Periprosthetic Femoral Fracture in Total Hip Arthroplasty.

BACKGROUND: The optimal technique for plate fixation to treat type B and C periprosthetic femoral fractures (PFFs) is unclear. The purpose of this study is to evaluate the radiographic results of inner-side-out limited contact dynamic compression plate (LC-DCP) to treat PFFs during or after total hip arthroplasty (THA). METHODS: This retrospective study comprised of four men and six women with an average age of 64.7 years who underwent open reduction and internal fixation with an inner-side-out LC-DCP technique to treat PFFs; the reduction was maintained preliminary with the use of contoured plate and cables, and the grooves on the undersurface of LC-DCP for limited contact was used to hold and prevent the cables from slippage during tightening the cables. There were five intraoperative and five postoperative PFFs after THA. According to the Vancouver classification, the intraoperative PFFs included type B2 in two, B3 in one and C3 in two patients while postoperative PFFs were categorized into type B1 in one, type B2 in two and type C in two patients. The mean follow-up duration was 5.9 years (range 1-10.4). We evaluated radiographic union and complications after index operation. RESULTS: All patients demonstrated radiographic bone union at an average follow-up duration of 4.4 months (range 3-8). Two patients showed stem subsidence after revision THA and one patient demonstrated a subsequent peri-implant fracture around the distal end of plate after union of the initial PPF; one patient underwent re-revision THA for stem loosening while another patient went through refixation for the peri-implant fracture. There was no nonunion, infection, nerve injury, or dislocation. CONCLUSION: The inner-side-out LC-DCP technique showed satisfactory radiographic outcome. In certain situations where locking plates are not available, this technique might be a useful alternative for treating type B and C PFFs.

Two reconstruction plates provide superior stability of displaced midshaft clavicle fractures in comparison to single plating - A biomechanical study.

BACKGROUND: Displaced midshaft fractures are the most common surgically treated clavicle fractures. However, they are associated with high complication rates following plating due to fixation failure in terms of plate breakage, screw breakage and/or screw loosening. The aim of this study was to compare the biomechanical competence of three different plating techniques for fixation of displaced midshaft clavicle fractures. METHODS: Displaced midshaft fractures type 2B according to the Robinson classification were simulated by standardized osteotomy gap in 18 synthetic clavicles, assigned to three groups (n = 6) for plating with either superiorly placed Dynamic Compression Plate (width/thickness 11.0/4.0 mm), locked Superior Anterior Clavicle Locking Compression Plate (width/thickness 10.2/2.0 mm), or two non-locked Reconstruction Plates placed superiorly and anteriorly (width/thickness 10.0/2.8 mm). Each specimen was cyclically tested at 3 Hz under craniocaudal cantilever bending, superimposed with torsion around the shaft axis over 720'000 cycles or until failure occurred. The latter was defined by plate breakage, screw breakage or screw loosening. FINDINGS: Initial construct stiffness (N/mm) and cycles to failure in group Reconstruction Plates (22.30 ± 4.07; 712'778 ± 17'691) were significantly higher compared with both groups Compression Plate (12.53 ± 2.09; 348'541 ± 212'941) and Locking Plate (4.19 ± 0.46; 19'536 ± 3'586), p ≤ 0.019. In addition, these two outcomes were significantly higher in group Compression Plate versus Locking Plate, p ≤ 0.029. INTERPRETATION: Double plating of unstable midshaft clavicle fractures with reconstruction plates seems to provide superior fixation stability under dynamic loading, when compared to single compression or locked plating, whereas the latter is associated with inferior performance.

Vascularised fibular graft in the management of non-union of fracture shaft of radius: a less ventured entity.

INTRODUCTION: Non-union of the radius and ulna is a major complication of forearm fractures, accounting upto 10% of all forearm fractures. Multiple modalities are available for the treatment of non-union. Vascular grafts are a less sought-after surgical choice owing to the need of expertise and skills of surgeons. We discuss a case of gap non-union of fracture shaft radius treated with vascular fibula graft. CASE REPORT: We describe a case of 45yr old lady with closed fracture of both bones of left forearm.She underwent open reduction and internal fixation with 3.5 small DCP (6 hole) two days following trauma. On subsequent follow up in 6 months the radius fracture showed signs of infected non-union with osteolysis at screw sites while the ulnar side showed signs of satisfactory union. The patient underwent debridement with implant removal and osteosynthesis with vascularised fibula for gap non-union as second stage. 3 and 6 months follow up showed improvement in DASH score as well as VAS score and fair return of regular activity. CONCLUSION: In management of gap non-union of Shaft radius with gap (>6cm) vascularised fibular graft provides excellent functional outcome with far less donor site complications. FUNDING: None declared.

Biomechanical Properties of the Modified Memory Alloy Internal Fixator for Separation of Pubic Symphysis / 医用生物力学

Objective To investigate biomechanical characteristics of the modified memory alloy internal fixator for separation of pubic symphysis. Methods The model of pubic symphysis separation injury was established based on 10 pelvic specimens. The control group was fixed with the dynamic compression plate after reduction, and the experimental group was fixed with the modified memory alloy internal fixator for separation of pubic symphysis after reduction. The biomechanical stability for two kinds of internal fixation was compared. Results There were no loosening and fracture of internal fixation in both groups. The displacement of pubic symphysis in horizontal, anterio-posterior and vertical direction in the experimental group was obviously reduced compared with the control group (P＜0.05). Conclusions Compared with the dynamic compression plate, the modified memory alloy internal fixator for separation of pubic symphysis shows better resistance to the tensile force against horizontal and anterio-posterior direction, as well as better resistance to the vertical shear force.

Effect of the screw tightening sequence on the stress distribution of a dynamic compression plate: A pilot finite element study.

OBJECTIVE: Although the optimal screw tightening sequence is a common question orthopaedists encounter during fractures fixation with a dynamic compression plate (DCP), the effect of the screw tightening sequence on the stability of the plate has never been explored. This study explores the effect of the screw tightening sequence on the stress distribution of a DCP using a finite element method. METHODS: Idealized finite element analysis models of the femoral diaphysis with six-hole or eight-hole DCPs were constructed. The screw tightening preload was simulated using 'bolt load' in ABAQUS. Two screw tightening sequences were studied for the six-hole plate and six sequences were studied for the eight-hole plate. U magnitude and Von Mises stress were used to evaluate the deformation and stress distribution of the plate, respectively. Deformation and stress distribution plots from different sequences were compared. RESULTS: The different screw tightening sequences showed different deformation processes, while all had the same final deformation after all the screws were tightened. Each screw tightening step of different tightening sequences showed different stress distributions in the plate, while all had the same stress distribution after all the screws were tightened. CONCLUSION: Using different screw tightening sequences to fix the same DCP can produce the same stability, which means in terms of fixation stability, after the two screws nearest to the fracture line are tightened, surgeons do not need to hesitate about the order in which the rest screws should be inserted during the surgery.

Comparison of implant failure rates of different plates for midshaft clavicular fractures based on fracture classifications.

BACKGROUNDS: The aim of our study was to investigate failure rates of reconstruction plate and non-reconstruction plate, and find the best strategy for implant selection for different fracture types for midshaft clavicular fractures. PATIENTS AND METHODS: Two hundred twenty-six consecutive patients with midshaft clavicular fractures who received open reduction and plate fixation during Jan 2012 to July 2017 were reviewed. The correlations between implant failure rates and risk factors including demographic data, fracture classifications, and implant types were analyzed. RESULTS: AO/OTA fracture classification and plate types are the most important factors affecting implant failure for midshaft clavicular fractures. Reconstruction plate had a significantly higher failure rate (53%) than that of non-reconstruction plates (3%) in comminuted midshaft clavicular (AO/OTA 15-2C) fractures (P value < 0.01). However, the difference was not significant in AO/OTA 15-2A and 2B classifications. CONCLUSION: Patients with comminuted midshaft clavicular (AO/OTA 15-2C) fractures treated with reconstruction plates had very high implant failure rates compared to non-reconstruction plates. We suggested that patients with comminuted midshaft clavicular (AO/OTA 15-2C) fractures treated with reconstruction plates need more protection and more frequent follow-up in the postoperative period.

Are proximal screws necessary for osteosynthesis of stable-stem periprosthetic femoral fractures fixed with non-locking plate and cable?

INTRODUCTION: The purpose of this study was to assess the effectiveness of the cable-plate-cable technique which comprises fixation of the proximal fragment using cable loops without additional proximal screws on the plate for the treatment of stable-stem periprosthetic femoral fractures around hip prostheses. METHODS: We retrospectively reviewed Vancouver types B1 and C periprosthetic femoral fractures treated with a dynamic compression plate combined with Dall-Miles cable between 2010 and 2016 at a single institution and followed for at least 12 months. Patients were treated with proximal fragment fixation using cable combined with screws (Group I) or with proximal fragment fixation using cable alone (Group II). Demographic data, fracture types, and clinical and radiological outcomes were analyzed. RESULTS: A total of 50 patients were included (Group I, n = 23 patients; Group II, n = 27). Fracture union was achieved in 49 patients with one case of non-union in Group I and no cases of non-union in Group II. Mean time to union was 5.4 months in Group I and 5.1 months in Group II (P = 0.624). Mean Harris hip score at latest assessment was 69.5 in Group I and 69.4 in Group II (P = 0.919). Regarding complications, there was one deep wound infection, one stem subsidence, and one loss of reduction in Group I, and one stem subsidence in Group II. No significant difference in clinical and radiological outcomes between groups was observed. CONCLUSIONS: The cable-plate-cable technique sufficiently treats Vancouver types B1 and C periprosthetic femoral fractures without use of additional screws in the proximal fragment.

Outcome Of Dynamic Compression Plate With Dorsal Radial Sliding Graft Technique For Wrist Arthrodesis In Brachial Plexus Injury Patients.

BACKGROUND: The incidence of brachial plexus injuries have shown to increase over the years. It is 1- 2% worldwide according to the WHO. In global brachial plexus injuries and lower root injures when the wrist and hand functions are lost, wrist arthrodesis is a viable option. In other cases, when there are some residual hand functions, wrist arthrodesis stabilizes the wrist as well as provides donor muscles tendons to enhance finger functions. Apart from these, wrist arthrodesis increase grip strength and power, and also wrist in extension assume a better shape cosmetically. PURPOSE: Outcome of dynamic compression plate with dorsal radial sliding graft for wrist arthrodesis in terms of time to union and complications in brachial plexus injury patients. METHODS: This is a retrospective chart review of patients treated in National Orthopaedic Hospital Bahawalpur, from January 2011 to Sep 2017. All the patients with brachial plexopathies of both genders from age 14 to 60 were included in the study. Data was analysed using MS Excel 2010. RESULTS: A total of 34 patients were included in the study. Road traffic accidents was the major cause of the injury having 30 (88%) patients whereas birth palsy and gunshots had 2 patients each (6%). Twenty-three patients had no associated fracture while remaining 11 patients had a fracture. There was union in all patients (100 %) and mean time to union was 6.5 weeks (range 6-8) radiologically. Mean follow up was 20.2 months (range 1.5-72).

Effect of wire electro discharge machining process parameters on surface integrity of Ti49.4Ni50.6 shape memory alloy for orthopedic implant application.

Ti49.4Ni50.6 (atomic %) shape memory alloy (SMA) is a unique class of smart materials because of its unbeatable property. It plays a very important role in the construction of novel orthopedic implants, because of its lower Young's modulus compared to other biomedical implant materials, Conventional machining of Ti-Ni yields poor surface finish and low dimensional accuracy of the machined components. Wire electro-discharge machining (WEDM) can achieve high dimensional accuracy, but its thermal nature causes great concern regarding surface integrity for biocompatibility application of Ti-Ni material. Therefore, it is necessary to investigate the surface morphology and non-toxic, non-hazardous surface conductive to the human body. Hence, WEDM of Ti-Ni can be used. Shape memory effect (SME) of SMA was achieved by subsequent heat treatment processes which include annealing followed by ageing. For manufacturing the Ti-Ni implants, a WEDM optimized process has been used and various performance attributes such as material removal rate (MRR), surface roughness (SR), surface topography, metallurgical changes, recast layer, micro-hardness, residual stresses and shape recovery ability of the machined components have been evaluated, so as to obtain high biocompatibility of machined surface. The minimum surface roughness with consistency, suitable surface integrity parameters like less deposition of material, minimum recast layers thickness, consentaneous amount of surface hardness and less affecting subsurface residual stresses have been determined for validated experiment with an increase in wire feed. MRR increases with increase in wire feed. SR decreases with increase in wire feed due to enhanced splashing of molten material. Shape recovery ability near wire electro-discharge machined surface has been investigated from the biocompatible point of view. Heat treatment like annealing is found to be the most suitable process to recover shape memory effect of WEDMed samples.

A biomechanical comparison of conventional dynamic compression plates and string-of-pearls™ locking plates using cantilever bending in a canine Ilial fracture model.

BACKGROUND: Fracture of the ilium is common orthopedic injury that often requires surgical stabilization in canine patients. Of the various methods of surgical stabilization available, application of a lateral bone plate to the ilium is the most common method of fixation. Many plating options are available, each having its own advantages and disadvantages. The purpose of this study was to evaluate the biomechanical properties of a 3.5 mm String-of-Pearls™ plate and a 3.5 mm dynamic compression plate in a cadaveric canine ilial fracture model. Hemipelves were tested in cantilever bending to failure and construct stiffness, yield load, displacement at yield, ultimate load, and mode of failure were compared. RESULTS: The mean stiffness of dynamic compression plate (116 ± 47 N/mm) and String-of-Pearls™ plate (107 ± 18 N/mm) constructs, mean yield load of dynamic compression plate (793 ± 333 N) and String-of-Pearls™ plate (860 ± 207 N) constructs, mean displacement at yield of dynamic compression plate (8.6 ± 3.0 mm) and String-of-Pearls™ plate (10.2 ± 2.8 mm) constructs, and ultimate load at failure of dynamic compression plate (936 ± 320 N) and String-of-Pearls™ plate (939 ± 191 N) constructs were not significantly different. No differences were found between constructs with respect to mode of failure. CONCLUSIONS: No significant biomechanical differences were found between String-of-Pearls™ plate and dynamic compression plate constructs in this simplified cadaveric canine ilial fracture model.

Clinical Outcome of Treatment of Diaphyseal Fractures of Humerus Treated by Titanium Elastic Nails in Adult Age Group.

INTRODUCTION: Humerus shaft fracture is one of the most common injuries to the musculoskeletal system, which are managed both conservatively and surgically. There are pitfalls, advantages and disadvantages in each method. The individual fracture analysis determines the therapeutic options. AIM: To assess the clinical outcome of treatment of diaphyseal fractures of humerus treated by Titanium elastic nail in adult age group by DASH scoring. MATERIALS AND METHODS: It was a prospective study of 20 cases of diaphyseal fracture of humerus admitted to Era's Lucknow Medical College and Hospital between October 2014 and September 2015 treated with close reduction and internal fixation with titanium elastic nail. Functional outcome was evaluated using DASH scoring system and radiological outcome was evaluated by serial radiographs. The data was processed with SPSS software version 16.0 (Chicago, inc. USA) and it was summarized in proportion and percentage. RESULTS: In our series of 20 patients, 17 were males and three were females. Most of the patients were between 30-50 years of age (mean 38 years). Most common mode of injury, side of involvement, level of fracture and fracture type were road traffic accidents (60%), right side (53.3%) and mid one third (75%), transverse (60%) respectively. So, in 65% of the patients, there was no disability of arm shoulder and hand as DASH score was within normal range and in 15% of the patients the disability was mild to moderate as scoring was slightly higher than normal and in 20% the disability was severe as the DASH score could not be calculated because of non union. CONCLUSION: Elastic nail fixation require very minimal soft tissue dissection and being a close reduction, the biology of the fracture is also not disturbed and the chances of nerve injury are much less and as the non union was seen in oblique and spiral fracture type hence it should be used with caution or else other alternative methods of fixation should be used.

Management of a failed femoral plate in an obese patient: A case report

Femoral nailing is the overall “gold standard” in treating femoral shaft fractures. However, plate osteosynthesis at the femoral shaft is still being done in selected patients. We report a case of right femoral implant failure after a broad limited contact dynamic compression plate (LC-DCP) insertion and its subsequent management using our minimally invasive technique. Our technique is biologically compliant as well as cosmetically friendly. We converted a loadbearing implant into a load-sharing implant in view that obesity is a significant predictive factor of non-union in a femoral fracture treated with locking plate. The patient subsequently recovered well with no complication.

The Clinical and Radiological Results of Vancouver Type B1 and C Periprosthetic Fractures

PURPOSE: The purpose of this study is to evaluate the clinical and radiologic results of plate fixation in the Vancouver B1 and C periprosthetic femoral fracture (PFF). MATERIALS AND METHODS: Twenty patients who had sustained a Vancouver type B1 and C periprosthetic fracture after hip arthroplasty (years 2002-2012) were identified. The mean age was 66.0 years (range, 43-85 years) and the mean follow-up duration of the group was 38 months (range, 12-102 months). The dynamic compression plate (DCP) group included 12 patients and the locking compression plate (LCP) group included eight patients. Harris hip score (HHS) and walking ability, knee joint range of motion (ROM) were compared before injury and last follow-up. Fracture union rate and period were compared. RESULTS: The mean HHS score was 90.7 (64-96). There was no statistical difference between the two groups. At the last follow-up, knee joint ROM was 103.3degrees (105degrees-140degrees) in the DCP group and 118.4degrees (110degrees-140degrees) in the LCP group, showing good results in the LCP group (p=0.043). No significant difference in the fracture union rate and union periods was observed between the two groups. CONCLUSION: A better result for the postoperative knee flexion exercise capacity was observed in the LCP group. Use of LCP plate fixation is a good option in management of Vancouver classification B1 and C PFF.