Use of Honey Bees and Hive Products as Bioindicators to Assess Environmental Contamination in Targeted Areas of the Campania Region (Italy).

In recent years, biomonitoring has gained more attention, particularly when assessing the environmental health of significant areas, such as those near waste-to-energy facilities. These requirements coincide with the chance to detect environmental pollutants using sensitive organisms. Bees were shown to be quite effective in evaluating the presence of certain compounds by analyzing their associated matrices, such as pollen, honey, or wax. In our study, we employed the honey bee (Apis mellifera) as an indicator to initially monitor the vicinity of the waste-to-energy plant in Acerra, which is situated in the Campania region of Italy. The primary aim was to determine whether the facility was accountable for any environmental releases of dioxins or dioxin-like compounds. Then, we assessed the presence of additional pollutants in the same area, including trace elements, polycyclic aromatic hydrocarbons, and pesticides, released by human activities. To obtain further information about environmental quality, a second biomonitoring station was installed near the Caivano S.T.I.R. (Waste Shredding, Sifting, and Packaging Plant). The results showed the dioxin levels did not exceed predetermined limitations at the Acerra site, thus demonstrating the efficacy of the waste-to-energy facility and the bees' ability to detect the presence of other pollutants. Additionally, this biomonitoring system exhibited sensitivity to environmental variations, thereby enabling the evaluation of xenobiotic flux between two proximate zones and across temporal scales. This pioneering study suggests the advantages of utilizing bees to detect a wide range of contaminants, thereby providing valuable insights into environmental quality and potential health risks for both ecosystems and human populations.

Internal radiation exposure from TENORM for workers conducting cleaning activities on equipment used at geothermal energy plant.

Geothermal energy is predicted to be one of the most important renewable energy sources in the near future. In geothermal energy plants, the secondary products such as the scale containing naturally occurring radioactive material (NORM) and adhering to the surface of equipment produce radiation fields. The workers who maintain and clean such equipment are at a risk to be exposed by the technically enhanced NORM (TENORM). To estimate the risks of radiation exposure to the workers, we assessed internal doses resulting from the cleaning activities on 150 heat exchanging boards used at a geothermal energy plant, focusing on 222Rn, 226Ra, 210Pb, 228Ra and 228Th. The experiment was performed with the subjects of workers and office workers as control, supplying prepared foods and drinks. Using the analytical results of 210Pb, 226Ra, 228Ra, and 228Th in the excretions of subjects, committed effect doses were determined. The annual internal dose for the workers with protective clothing due to the cleaning activities on removing scale, assuming the cleaning activities requires 170 h (standard monthly working time) a year, was obtained as 26 µSv/y and the total dose including 222Rn inhalation dose was calculated as 323 µSv/y. The additional dose for the cleaning workers was less than the dose limit of 20000 µSv/y for radiation workers, even less than for general population (1000 µSv/y) recommended by International Commission on Radiological Protection (ICRP). However, the elevated inhalation dose for workers conducting cleaning activities may present a health hazard to workers if they deal with excessive materials containing TENORM, work for excessive time or are under inappropriate safety measures.

Utilization of isolated microbe and treated wastewater for enhanced growth of Jatropha curcas for bioremediation of fly ash amended soil.

The generation of Fly Ash (FA) waste is continuously piling up with the increasing energy demand. Recent research is focused towards reutilizing this fly ash waste through bioremediation practices. But fly ash retards the growth of plants and holds back to support the bioremediation process due to a deficiency of essential main nutrients. The present research envisages overcoming this problem by providing a novel concept of inducing isolated microbes and treated wastewater which provides necessary nutrients and promotes better plant growth and metal extraction. A pot experimental study was executed with treatments T1 (FA amended soil), T2 (FA with isolated microbe), and T3 (FA with microbes and treated wastewater). As an outcome of the present research, T3 gained relatively higher morphological characteristics viz. Leaf area (29.8%), absolute growth rate (61.7%), plastochron index (18.6%), biomass yield (47.3%) and enhanced metal extraction for Fe (34.4%), Al (27.1%), Mn (72.0%), Zn (17.5%) in comparison to the control. Treatment T3 also gained higher Remediation Efficiency (RE) and Bio-Concentration Factor (BCF) values for Al, Fe, and Mn. The involvement of nutrients via treated wastewater energizes the process mechanism and increases the working zone for the microbes thereby, enhancing the bioremediation.

Cadmium uptake by a hyperaccumulator and three Pennisetum grasses with associated rhizosphere effects.

Pennisetum grasses (P. purpureum Schumach. 'Purple', P. alopecuroides (L.) Spreng. 'Liren' and P. alopecuroides (L.) Spreng. 'Changsui'), and a cadmium (Cd) hyperaccumulator (Thlaspi caerulescens J.Presl & C.Presl), were grown in soil with four Cd addition levels of 0, 2, 20 and 200 mg/kg. Toxicity symptoms were not observed although growth of all plants decreased as Cd addition increased. Shoot bioconcentration factor (BCFS), the translocation factor (TF) and shoot accumulation of Cd for most plants first increased and then declined as Cd concentrations increased. In contrast, the root bioconcentration factor (BCFR) for T. caerulescens declined and root Cd accumulation for T. caerulescens and two P. alopecuroides cultivars increased consistently as Cd levels increased. P. purpureum had the largest biomass with shoot Cd accumulation similar to that of T. caerulescens, despite lower foliar Cd concentration. Although shoot Cd concentrations of two P. alopecuroides cultivars were lower than for P. purpureum, root Cd concentrations were greater. P. purpureum had Cd BCFS and TF (> 1) at 2- and 20-mg/kg Cd addition treatments, similar to T. caerulescens. P. alopecuroides cultivars had Cd BCFR (> 1) and TF (< 1) at all Cd levels. Roots did not affect rhizosphere pH. However, concentrations of acid extractable Cd in rhizosphere soil were lower than those of corresponding non-rhizosphere soil at all Cd levels for T. caerulescens and P. purpureum; T. caerulescens and P. purpureum did not affect less bioavailable Cd fractions. Concentrations of acid extractable Cd in the rhizosphere of the P. alopecuroides cultivars were not reduced at any Cd level. Differences in Cd accumulation among the three Pennisetum grasses were mainly attributable to root biomass and Cd TFs rather than rhizosphere Cd mobility.

SorGSD: updating and expanding the sorghum genome science database with new contents and tools.

BACKGROUND: As the fifth major cereal crop originated from Africa, sorghum (Sorghum bicolor) has become a key C4 model organism for energy plant research. With the development of high-throughput detection technologies for various omics data, much multi-dimensional and multi-omics information has been accumulated for sorghum. Integrating this information may accelerate genetic research and improve molecular breeding for sorghum agronomic traits. RESULTS: We updated the Sorghum Genome SNP Database (SorGSD) by adding new data, new features and renamed it to Sorghum Genome Science Database (SorGSD). In comparison with the original version SorGSD, which contains SNPs from 48 sorghum accessions mapped to the reference genome BTx623 (v2.1), the new version was expanded to 289 sorghum lines with both single nucleotide polymorphisms (SNPs) and small insertions/deletions (INDELs), which were aligned to the newly assembled and annotated sorghum genome BTx623 (v3.1). Moreover, phenotypic data and panicle pictures of critical accessions were provided in the new version. We implemented new tools including ID Conversion, Homologue Search and Genome Browser for analysis and updated the general information related to sorghum research, such as online sorghum resources and literature references. In addition, we deployed a new database infrastructure and redesigned a new user interface as one of the Genome Variation Map databases. The new version SorGSD is freely accessible online at http://ngdc.cncb.ac.cn/sorgsd/ . CONCLUSIONS: SorGSD is a comprehensive integration with large-scale genomic variation, phenotypic information and incorporates online data analysis tools for data mining, genome navigation and analysis. We hope that SorGSD could provide a valuable resource for sorghum researchers to find variations they are interested in and generate customized high-throughput datasets for further analysis.

Effects of digestate on biomass of a selected energy crop and soil properties.

BACKGROUND: A large number of digestates have not been fully utilized due to a lack of scientific, reasonable guidance, as well as imperfect technology. Hybrid giant Napier has great potential for use as a type of energy plant. As such, this study investigated the effects of digestate on the growth of a candidate energy crop and examined whether digestate was an ecologically viable means for soil restoration. RESULTS: The results showed that the total yields of all treatment groups receiving irrigation of digestate were higher (5.19-26.00%) than those of the control. The total phosphorus, total potassium, available nitrogen, available phosphorus, and available potassium content of the soil had also increased after digestate application, compared with the control. Urease activities for all treatments increased 15.28 to 69.44% more than that of the corresponding control. Soil dissolved organic matter (DOM) mainly contained humic-like and fulvic-like components through the application of digestate. More fluorescent components were also identified by two-dimensional correlation spectroscopy (2D-COS). These fluorescent components can improve the aromaticity and molecular weight of soil DOM so as to improve soil quality. CONCLUSIONS: Digestate improved not only the aboveground biomass accumulation, but also the chemical properties of the soil, which was an appropriate strategy for restoring soil quality and contributing to the sustainable development of marginal. The long-term impact of digestate application on soil quality will require additional long-term experiments. © 2020 Society of Chemical Industry.

Mechanism of Remediation of Cadmium-Contaminated Soil With Low-Energy Plant Snapdragon.

In the process of remediation of contaminated soil, we should give full play to the role of low-energy plants and fully display the concept of modern energy-saving and environmental protection. Phytoremediation is an effective method to remediate cadmium-contaminated soil, and root exudates play an important part in this process. Here, the response of snapdragon in a pot-culture experiment under two concentrations of Cd (1.0 and 2.5 mg/kg) was evaluated. Snapdragon is a medicinal plant with low energy consumption, which has low requirements on environmental factors and strong resistance. The results showed that both Cd concentrations interfere with the uptake of B, P, Cu, Mn, Mo, and Zn by the soil. The results also showed that plant type and Cd stress can significantly change the concentrations and species of root exudates. The metabolic changes of root exudates revealed the active defense mechanism of plants to Cd stress: up-regulating of amino acids to sequester/exclude Cd, regulation of citric acid on chelation/complexation, and precipitation of cadmium ions. The application of snapdragon can effectively reduce energy consumption and gradually improve the utilization rate of vegetation, which promotes the degradation of cadmium pollutants in soil.

JCDB: a comprehensive knowledge base for Jatropha curcas, an emerging model for woody energy plants.

BACKGROUND: Jatropha curcas is an oil-bearing plant, and has seeds with high oil content (~ 40%). Several advantages, such as easy genetic transformation and short generation duration, have led to the emergence of J. curcas as a model for woody energy plants. With the development of high-throughput sequencing, the genome of Jatropha curcas has been sequenced by different groups and a mass of transcriptome data was released. How to integrate and analyze these omics data is crucial for functional genomics research on J. curcas. RESULTS: By establishing pipelines for processing novel gene identification, gene function annotation, and gene network construction, we systematically integrated and analyzed a series of J. curcas transcriptome data. Based on these data, we constructed a J. curcas database (JCDB), which not only includes general gene information, gene functional annotation, gene interaction networks, and gene expression matrices but also provides tools for browsing, searching, and downloading data, as well as online BLAST, the JBrowse genome browser, ID conversion, heatmaps, and gene network analysis tools. CONCLUSIONS: JCDB is the most comprehensive and well annotated knowledge base for J. curcas. We believe it will make a valuable contribution to the functional genomics study of J. curcas. The database is accessible at http://jcdb.xtbg.ac.cn.

Economic evaluation of improvements in a waste-to-energy combined heat and power plant.

Improving the efficiency of waste-to-energy combined heat and power plants increases their production of both electricity and heat. Economic evaluation of such improvements enables adequate decisions to be made between the various alternatives with respect to economic viability of the plant. In this study, the cost and profitability of different modifications to improve efficiency in a waste-to-energy plant are considered: these include the re-arrangement of air heaters, the introduction of a reheater, flue gas condensation (FGC) and an integrated gasification-combustion process. The base case and the modifications are evaluated and compared when operating either as a combined heat and power plant or as a power plant. Modelling, simulation and cost estimations were performed with the Aspen Plus software. Although the integrated gasification-combustion technology with FGC has the highest exergy efficiency, its higher capital cost is greater than all of the other alternatives. Modification 6, which involves both re-arrangement and changing the air heating medium has the lowest capital cost with respect to enhancing exergy efficiency. Modifications 1 and 7, involving FGC, are the best alternatives for the capital cost per total unit of revenue generated. These modifications not only provides the highest heat production but also the highest net present value (NPV). The base case and the modifications investigated all have positive NPV, indicating that a waste-to-energy combined heat and power plant is an attractive investment. However, an increase of about 122% in the gate fees would be required for a system with only electricity production to be profitable.

Current and possible approaches for improving photosynthetic efficiency.

One of the most important tasks laying ahead today's biotechnology is to improve crop productivity with the aim of meeting increased food and energy demands of humankind. Plant productivity depends on many genetic factors, including life cycle, harvest index, stress tolerance and photosynthetic activity. Many approaches were already tested or suggested to improve either. Limitations of photosynthesis have also been uncovered and efforts been taken to increase its efficiency. Examples include decreasing photosynthetic antennae size, increasing the photosynthetically available light spectrum, countering oxygenase activity of Rubisco by implementing C4 photosynthesis to C3 plants and altering source to sink transport of metabolites. A natural and effective photosynthetic adaptation, the sugar alcohol metabolism got however remarkably little attention in the last years, despite being comparably efficient as C4, and can be considered easier to introduce to new species. We also propose root to shoot carbon-dioxide transport as a means to improve photosynthetic performance and drought tolerance at the same time. Different suggestions and successful examples are covered here for improving plant photosynthesis as well as novel perspectives are presented for future research.

Comparative study on effects of four energy plants growth on chemical fractions of heavy metals and activity of soil enzymes in copper mine tailings.

Four gramineous energy plants, Miscanthus sacchariflorus, M. floridulus, Phragmites australis, and Arundo donax were grown on copper tailings in the field for four years. Their phytoremediation potential was examined in terms of their effects on the fractions of heavy metals and soil enzyme activities. Results showed that plantation of these four gramineous plants has improved the proportion of organic material (OM)-binding fraction of heavy metals in copper tailings as a whole, and reduced the proportion of exchangeable and residual fractions. In particular, M. sacchariflorus growth improved significantly the proportion of the OM-binding fractions of Cu (1.73 times), Cd (1.71 times), Zn (1.18 times), and Pb (3.14 times) (P < 0.05) and reduced markedly the residual fractions of Cu (64.45%), Cd (82.38%), Zn (61.43%), and Pb (73.41%) (P < 0.05). Except for A. donax, the growth of other three energy plants improved the activity of phosphatase, urease and dehydrogenase in copper tailings to some extent. In particular, the activity of soil phosphatase and urease in planted tailings differed significantly from that of control (P < 0.05). The effect of M. sacchariflorus growth on soil enzyme was the highest, followed by P. australis, M. floridulus, and A. donax. The content of each heavy metal fraction in soil was correlated with soil enzyme activities, especially the content of OM-binding fraction, which correlated significantly with the activities of phosphatase, urease and dehydrogenase in soil. According to the effects of four gramineous plants growth on activity of soil enzymes and fractions of heavy metals, M. sacchariflorus had the optimal effects for phytoremediation. Therefore, M. sacchariflorus was a candidate plant with great potential for the revegetation of heavy metal tailings.

[Heavy metal tolerance of Miscanthus plants and their phytoremediation potential in abandoned mine land]. / èŠ’å±žæ¤ç‰©é‡é‡‘å±žè€æ€§åŠå ¶åœ¨çŸ¿å±±åºŸå¼ƒåœ°æ¤è¢«æ¢å¤ä¸­çš„åº”ç”¨æ½œåŠ›.

Miscanthus has been recognized as promising candidate for phytoremediation in abandoned mine land, because of its high tolerance to heavy metals and bioenergy potential. Miscanthus has been reported tolerant to several heavy metal elements. However, it has not been recognized as hyperaccumulator for these elements. The detailed mechanisms by which Miscanthus tolerates these heavy metal elements are still unclear. According to recent studies, several mechanisms, such as high metabolic capacity in root, an abundance of microbes in the root-rhizosphere, and high capacity of antioxidation and photosynthesis might contribute to enhance the heavy metal tolerance of Miscanthus. Miscanthus has a certain potential in the phytoremediation of abandoned mine land, because of its high suitability for the phytostabilization of heavy metals. Moreover, Miscanthus cropping is a promising practice to enhance the diversity of botanical species and soil organism, and to improve soil physical and chemical properties. Here we reviewed recent literatures on the biological characteristics and the heavy metal tolerance of Miscanthus, and its phytoremediation potential in abandoned mine land. A basic guideline for using Miscanthus in abandoned mine land phytoremediation and an outlook for further study on the mechanisms of heavy metals tolerance in Miscanthus were further proposed. We hoped to provide theoretical references for phytoremediation in abandoned mine land by using Miscanthus.

SorGSD: a sorghum genome SNP database.

BACKGROUND: Sorghum (Sorghum bicolor) is one of the most important cereal crops globally and a potential energy plant for biofuel production. In order to explore genetic gain for a range of important quantitative traits, such as drought and heat tolerance, grain yield, stem sugar accumulation, and biomass production, via the use of molecular breeding and genomic selection strategies, knowledge of the available genetic variation and the underlying sequence polymorphisms, is required. RESULTS: Based on the assembled and annotated genome sequences of Sorghum bicolor (v2.1) and the recently published sorghum re-sequencing data, ~62.9 M SNPs were identified among 48 sorghum accessions and included in a newly developed sorghum genome SNP database SorGSD (http://sorgsd.big.ac.cn). The diverse panel of 48 sorghum lines can be classified into four groups, improved varieties, landraces, wild and weedy sorghums, and a wild relative Sorghum propinquum. SorGSD has a web-based query interface to search or browse SNPs from individual accessions, or to compare SNPs among several lines. The query results can be visualized as text format in tables, or rendered as graphics in a genome browser. Users may find useful annotation from query results including type of SNPs such as synonymous or non-synonymous SNPs, start, stop of splice variants, chromosome locations, and links to the annotation on Phytozome (www.phytozome.net) sorghum genome database. In addition, general information related to sorghum research such as online sorghum resources and literature references can also be found on the website. All the SNP data and annotations can be freely download from the website. CONCLUSIONS: SorGSD is a comprehensive web-portal providing a database of large-scale genome variation across all racial types of cultivated sorghum and wild relatives. It can serve as a bioinformatics platform for a range of genomics and molecular breeding activities for sorghum and for other C4 grasses.

The Tolerance and Accumulation of Miscanthus Sacchariflorus (maxim.) Benth., an Energy Plant Species, to Cadmium.

Miscanthus sacchariflorus (Maxim.) Benth. is a metallophyte suitable for the phytoremediation of mine wastes. The tolerance and accumulation of M. sacchariflorus to cadmium was studied by pot experiments. The results showed that O2·- generation rate, plasma membrane permeability and MDA content of M. sacchariflorus leaves increased with increasing Cd concentrations in soil, but significant effect was only observed when Cd concentrations were ≥50 mg·kg(-1). SOD and POD activities increased initially but decreased later on, whereas CAT activity only increased significantly at higher Cd concentrations, 50-100 mg·kg(-1). The content of photosynthetic pigment and growth of M. sacchariflorus were both not significantly affected when Cd concentration was ≤25 mg·kg(-1). In contrast, both parameters were significantly affected when Cd concentration was ≥50 mg·kg(-1). M. sacchariflorus could accumulate much Cd, but most of the Cd assimilated was retained in the belowground part, suggesting that M. sacchariflorus has poor ability to translocate Cd to the aboveground part. Our results suggested that although M. sacchariflorus was not a hyper-accumulator, it has a strong capacity to tolerate and stabilize the Cd. Therefore, M. sacchariflorus has a certain potential in the phytostabilization of Cd-contaminated soils.

A multi-echelon supply chain model for municipal solid waste management system.

In this paper, a multi-echelon multi-period solid waste management system (MSWM) was developed by inoculating with multi-echelon supply chain. Waste managers, suppliers, industries and distributors could be engaged in joint strategic planning and operational execution. The principal of MSWM system is interactive planning of transportation and inventory for each organization in waste collection, delivery and disposal. An efficient inventory management plan for MSWM would lead to optimized productivity levels under available capacities (e.g., transportation and operational capacities). The applicability of the proposed system was illustrated by a case with three cities, one distribution and two waste disposal facilities. Solutions of the decision variable values under different significant levels indicate a consistent trend. With an increased significant level, the total generated waste would be decreased, and the total transported waste through distribution center to waste to energy and landfill would be decreased as well.

Determination of fossil carbon content in Swedish waste fuel by four different methods.

This study aimed to determine the content of fossil carbon in waste combusted in Sweden by using four different methods at seven geographically spread combustion plants. In total, the measurement campaign included 42 solid samples, 21 flue gas samples, 3 sorting analyses and 2 investigations using the balance method. The fossil carbon content in the solid samples and in the flue gas samples was determined using (14)C-analysis. From the analyses it was concluded that about a third of the carbon in mixed Swedish waste (municipal solid waste and industrial waste collected at Swedish industry sites) is fossil. The two other methods (the balance method and calculations from sorting analyses), based on assumptions and calculations, gave similar results in the plants in which they were used. Furthermore, the results indicate that the difference between samples containing as much as 80% industrial waste and samples consisting of solely municipal solid waste was not as large as expected. Besides investigating the fossil content of the waste, the project was also established to investigate the usability of various methods. However, it is difficult to directly compare the different methods used in this project because besides the estimation of emitted fossil carbon the methods provide other information, which is valuable to the plant owner. Therefore, the choice of method can also be controlled by factors other than direct determination of the fossil fuel emissions when considering implementation in the combustion plants.