Fracture resistance of ultratranslucent multilayered zirconia veneers with different facial thicknesses.

To assess the fracture resistance of computer-aided design and computer-aided manufacturing (CAD/CAM) ultratranslucent multilayered zirconia (5Y-YZP) veneers with varying facial thickness. Sixty translucent zirconia veneers were designed and milled using a chairside CAD/CAM system for maxillary central incisors. The butt joint incisal veneer tooth preparations consisted of 1.00 mm incisal reduction, 0.40 mm chamfer margin, and three different facial reductions; 0.50, 0.75, and 1 mm, respectively. The ceramic veneers were cemented to printed resin dies and subjected to thermal cycling. Subsequently, the restorations were loaded with compressive loading force, and fracture occurrences were recorded. Scanning electron microscope (SEM) images of the fractured specimens were captured. The fracture resistance varied among the veneers with different facial thicknesses. Ultratranslucent zirconia veneers with a facial thickness of 1.00 mm exhibited the highest fracture resistance values (742.15 N), followed by those with 0.75 mm facial thickness (673 N). Minimally invasive veneers with 0.50 mm thickness displayed similar fracture resistance as thicker veneers with 0.75 mm. However, veneers with 1.00 mm thickness displayed the highest values. SEM fracture patterns for 0.50 and 0.75 mm display similar and fewer crack lines than 1.00 mm veneers. RESEARCH HIGHLIGHTS: Minimally invasive zirconia veneers exhibit similar fracture resistance to thicker veneers.

[Upper blepharoplasty, a plea for a high and longer scar]. / Blépharoplasties supérieures, pour une cicatrice haute et longue.

The review of 42 cases of upper blepharoplasties operated since 2020 has confirmed the validity of our technique of significant resection of skin in the upper eyelid, leaving 10 to 12mm of skin above the eyelashes, and remaining approximately 8 to 10mm above the eyebrow line; we named the design of this surgery under the name of an Italian elegant sports car, because of the particular curves of this car in the rear part, which rises a little upwards, like the external segments of the skin resection that we recommend in the practice of an upper blepharoplasty; a hindsight of almost 35 years showed that this procedure had great value due to the durability of the result; nevertheless it is appropriate to discuss this surgical orientation in a context where Asian surgeons rather recommend short scars and a much lower situation than that which we practice in our European patients.

Dental esthetic screening index (DESI) scores among patients attending Qassim University dental clinics.

Aim: This study aimed to evaluate dental esthetic screening index (DESI) Intraoral component scores among patients attending Qassim University dental clinics and the factors affecting these scores. Materials and methods: This was a retrospective study that included 150 participants aged 18 years or older with full upper and lower anterior dentitions. Standardized intraoral frontal photographs of the patients' upper and lower dentitions were acquired from their dental records, and the mean rank DESI intraoral scores were evaluated and compared across the demographic and dental characteristics of the study patients.The mean age of the patients sampled was 33.56; 57 % were female and 43 % were male. The mean DESI Intraoral score was 15.33. DESI scores were significantly higher in patients older than 35 years compared with subjects 35 years old or younger (p = 0.015). DESI scores were increased in patients who had anterior restorations compared with those who did not (p = 0.016). Conclusions: This was the first study of its kind to use the DESI in a large clinical setting. According to the DESI, most patients attending Qassim University dental clinics had good dentofacial aesthetics. Age and the presence of anterior restorations negatively impacted patients' dentofacial aesthetics. Sex, the nature of the chief complaint, a history of orthodontic treatments, and teeth bleaching did not affect the DESI scores.

The role of artificial intelligence in cosmetic and functional gynecology: Stepping into the third millennium.

Cosmetic and functional gynecology have gained popularity among patients, but the scientific literature in this field, particularly regarding the cosmetic aspect, is lacking. The use of evidence-based medicine is crucial to validate diagnostic tools and treatment protocols. However, the advent of artificial intelligence (AI) offers a promising solution to address this issue. ChatGPT, a sophisticated language model, can revolutionize AI in medicine, enabling accurate diagnosis, personalized treatment plans, and expedited research analysis. Cosmetic and functional gynecology can leverage AI to develop the field and improve evidence gathering. AI can aid in precise and personalized diagnosis, implement standardized assessment tools, simulate treatment outcomes, and assess under-skin anatomy through virtual reality. AI tools can assist clinicians in diagnosing and comparing difficult cases, calculate treatment risks, and contribute to standardization by collecting global evidence and generating guidelines. The use of AI in cosmetic and functional gynecology holds significant potential to advance the field and improve patient outcomes. This novel combination of AI and gynecology represents a groundbreaking development in medicine, emphasizing the importance of appropriate and correct AI usage.

Determination of the Color Change of Various Esthetic Monolithic Monochromatic Computer-Aided Design/Computer-Aided Manufacturing Materials.

Dental technology has developed materials for prosthetics that are very similar to natural teeth and offer a good balance between durability and esthetics; however, some of these materials are not very color-stable under the influence of external factors. Therefore, the aim of this study is to determine and compare the color change (∆E00) of different esthetic monolithic monochromatic CAD/CAM materials after they have been thermocycled and treated with staining solutions. The color parameters were determined using a spectrophotometer on a white and black background. Five CAD/CAM materials were used for this study-CAD/CAM nanoceramic (GC Cerasmart270), CAD/CAM lithium disilicate ceramic (IPS e.max CAD), CAD/CAM polymer (Telio CAD), CAD/CAM composite (Tetric CAD) and CAD/CAM polymer-infiltrated ceramic (Vita Enamic). The test specimens produced were divided into groups and were thermocycled in distilled water. They were then stored for four weeks at 37 °C in either distilled water as a control liquid, black tea, instant coffee or red wine. The aim is also to evaluate the color changes as a function of the exposure time of the staining solutions. The results obtained were analyzed statistically. All CAD/CAM materials tend to discolor to varying degrees. Among the factors contributing to discoloration, red wine proved to be the most significant influencing factor. The conclusion from the results is that the color change is influenced by the type of material, the staining solution, the sample thickness, the color background and the aging time.

Evaluation of the Golden Proportion, Golden Percentage, and Recurring Esthetic Dental Proportion in Kenyans of African Descent.

OBJECTIVES: To evaluate the validity of the Golden Proportion, Golden Percentage, and Recurring Esthetic Dental (RED) Proportion among Kenyans of African descent with naturally well-aligned teeth. MATERIALS AND METHODS: Standardized frontal photographic images of the smiles of 175 participants aged 18-35 years were obtained, and Adobe Photoshop was used to analyze and measure the frontal widths of the maxillary central and lateral incisors and canines in triplicate. The average teeth widths were calculated to determine the existence of the Golden Proportion, Golden Percentage, and RED Proportion, and their validity using independent sample t-tests to compare the differences in the mean teeth widths at α < 0.05. RESULTS: The number of male and female participants was 107 (61.1%) and 68 (38.9%), respectively. The Golden Proportion between the maxillary central and lateral incisors was found in 4.0% on the right and 2.8% on the left of all the participants, but between the maxillary lateral incisors and canines was found in only 0.6% on the right of male participants (p < 0.0001). The RED Proportion between the maxillary lateral and central incisors was in the range of 67%-70%, and between the canines and lateral incisors was 82%-84% (p < 0.0001). The proportion of RED was not constant, and gradually increased distally. The Golden Percentage of 15% was observed in the lateral incisors bilaterally; however, in the central incisors and the canines, the Golden Percentage was 22% and 12%, respectively. CONCLUSION: The Golden and RED Proportions were invalid determinants of anterior teeth proportions. The Golden Percentage existed only in the lateral incisors. The Golden Proportion, RED Proportion, and Golden Percentage theories may not be applicable to all populations when designing smiles. Racial and ethnic backgrounds are important considerations to establish objective quantifiable values of anterior tooth proportions that are beneficial for esthetic restorations.

Esthetic rehabilitation of labial tooth defects caused by caries of the anterior teeth using a composite resin injection technique with veneer-shaped 3D printing indices.

PATIENTS: An 18-year-old woman sought treatment for caries of the anterior teeth after completing orthodontic treatment. Direct composite resin restoration was chosen because the patient preferred a minimally invasive and cost-effective treatment whenever possible. Based on diagnostic wax-up, veneer-shaped indices for composite resin injection were designed to replicate and restore tooth defects rapidly and accurately. The overall esthetic result was excellent after a 1-year of follow-up. DISCUSSION: Direct freehand composite resin restorations are clinically challenging. The recently proposed 3D printing index for the composite resin injection technique is helpful for direct restoration but is challenging to remove. The veneer-shaped indices avoid the formation of an undercut in the direction of removing the index, making them easy to remove after finishing the restorations. CONCLUSIONS: Using veneer-shaped indices for composite resin injection enables rapid esthetic rehabilitation of labial tooth defects caused by caries. This approach reduces chairside time and operational difficulty while allowing for easy index removal after completing the restorations.

Chronic Facial Paralysis Treated With Non-absorbable APTOS Barbed Threads: A Case Report With Anatomic Considerations.

Chronic paralysis of the facial nerve leads to degenerative facial muscle and surrounding soft tissue alterations on the involved side, making the affected patients seem older than their actual age. Moreover, contralateral facial hypertrophy worsens facial asymmetry. Correction of the drooping or wrinkled face due to aging, trauma, or other pathology has been successfully treated with the thread-lifting technique. Here, we present the case report of a 23-year-old female patient suffering from oncologic post-surgery complications associated with chronic facial nerve paralysis. She also suffered from old and new cerebellar syndromes on the right side and lesions of the oculomotor, trochlear, and abducens nerves. Based on the patient history, the condition was treated under local anesthesia by the use of APTOS minimally invasive threads with barbs made from non-absorbable material. Correction and sculpting of the affected cheek area were performed by insertion of a light lift needle, and lifting of the superficial fat pads was secured by subdermal insertion of the light lift thread method. The jowl area was lifted by the superficial insertion of both types of threads. As a result, we significantly improved facial symmetry at rest, a more symmetric smile, a lifted corner of the mouth, and an anatomically sculpted cheek appearance.

Role of Polyetheretherketone in Prosthodontics: A Literature Review.

Implant prostheses and other fixed and removable metal prostheses have led to an increase in demand for the development of new and efficient materials such as high-performance polymers polyetheretherketone (PEEK) over titanium and other metals because of their further complications in the human body. PEEK is a polymer that is nontoxic and has a modulus of elasticity that is comparable to that of human bone. PEEK implants provide benefits over metal implants, such as reducing the stress shielding effect, simple processing, and color resemblance to natural teeth. And it is a fantastic alternative to titanium for dental and orthopedic implants. The current review is undertaken to understand the properties of this PEEK material to weigh its benefits and drawbacks for potential use in dental implants and other prostheses.

Capturing the art and science of dentistry in a lens: Digital dental photography.

Dental photography is now an excellent tool that plays a crucial role in dentistry as it helps in documenting and analyzing the oral conditions of patients. Photography provides a visual representation of the teeth, gums, and other oral structures, which aids in diagnosis, treatment planning, and monitoring the progress of treatment. Therefore, it is essential for dental professionals to understand the importance of dental photography and incorporate photography it into regular practice. The purpose of this paper is to provide emphasis and elucidate the path of dental photography easier for dental student and practitioner.

In Vitro Cytocompatibility Analysis and Comparison of Different Hyaluronic Acid Fillers for Minimally Invasive Esthetics.

BACKGROUND/AIM: To overcome the natural visual consequences of the physiological aging process, the use of biodegradable fillers made of hyaluronic acid or sodium carboxymethyl cellulose is increasingly popular in modern esthetic medicine. Clinicians can choose from a wide range of fillers with variable compositions and rheological properties, and therefore with different application areas and injection depths. The aim of this study was to analyze and compare the most commonly used fillers for facial augmentation regarding their in vitro biocompatibility and to find potential correlations to their rheological properties. MATERIALS AND METHODS: In the present study, direct and indirect in vitro cytotoxicity analysis according to DIN EN ISO 10993-5 were performed on 39 different filler materials for facial augmentation. RESULTS: All fillers analyzed in this study overall showed satisfactory results in the direct and indirect cytocompatibility tests. While no material was outside the threshold values in the 2,3-bis-(2-methoxy-4-nitro-5-sulphenyl)-(2H)-tetrazolium-5-carboxanilide (XTT) cell viability and bromodeoxyuridine (BrdU) cell proliferation assays or in the live-dead staining, only 7 out of the 39 fillers reached the required values in the lactate dehydrogenase assay. CONCLUSION: All biodegradable fillers examined in this study were found to be sufficiently cytocompatible. Although the qualitative analysis of the test results showed differences between the fillers, no concrete correlation between test performance and composition or manufacturer of the fillers was found. Future efforts are required to provide clinicians with even better support in choosing the right filler for optimal outcome and patient satisfaction.

Clinical guidelines for posterior semidirect composite resin restorations: a case report with a 17-month follow-up.

Patients are always looking for conservative, esthetic, and long-lasting dental restorations, and the technique used directly influences the longevity of the treatment. The location of the restoration in the mouth and the extent of the decay influence the treatment choice. The larger the dimensions of the cavity preparation, the greater the difficulties in restoring the tooth using direct techniques. The semidirect technique, when indicated, can achieve satisfactory results. It is a relatively easy procedure, consisting of tooth preparation to receive an indirect restoration, fabrication of an alginate impression, fabrication of the composite resin restoration on a flexible cast, cementation, removal of excess cement, and occlusal adjustment. The aim of this case report is to present a viable alternative to direct and indirect restorations for posterior teeth with extensive decay. The article describes the extraoral semidirect technique for fabricating a composite resin restoration, highlighting its indications and discussing advantages and disadvantages.

Ceramic Implant Rehabilitation: Consensus Statements from Joint Congress for Ceramic Implantology.

The objectives of the study group focused on the following main topics related to the performance of one- and two-piece ceramic implants: defining bone-implant-contact percentages and its measurement methods, evaluating the pink esthetic score as an esthetic outcome parameter after immediate implantation, recognizing the different results of ceramic implant designs, as redefined by the German Association of Oral Implantology, incorporating the patient report outcome measure to include satisfaction and improvement in oral health-related quality of life, and conducting preclinical studies to address existing gaps in ceramic implants. During the Joint Congress for Ceramic Implantology (2022), the study group evaluated 17 clinical trials published between 2015 and 2021. After extensive discussions and multiple closed sessions, consensus statements and recommendations were developed, incorporating all approved modifications. A one-piece implant design features a coronal part that is fused to the implant body or interfaces with the post-abutment restoration platform, undergoing transmucosal healing. Long-term evaluations of this implant design have been supported by established favorable clinical evidence. Inaccuracies in the pink esthetic score and bone-implant-contact percentages were managed by establishing control groups for preclinical studies and randomizing clinical trials. The patient-reported outcome measures were adjusted to include an individual visual analog scale, collected from each clinical study, that quantified improved oral health and quality of life. Preclinical investigations should focus on examining the spread of ceramic debris and the impact of heat generation on tissue and cellular levels during drilling. Further technical advancements should prioritize wound management and developing safe drilling protocols.

Effect of Child Health Drinks on Color Stability of Various Aesthetic Restorative Materials - An In Vitro Study.

Introduction: In pediatric dentistry, the esthetically pleasing materials have tremendously changed the concept of restorative practice. Aim and Objectives: 1. The aim of the study is to evaluate the effect of child health drinks on color stability of various esthetic restorative materials via spectrophotometric analysis and to identify the esthetic restorative material that is color-stable against child health drinks. Materials and Methods: A total of 120 disk-shaped specimens with a diameter of 12 mm and a thickness of 2 mm were made from a composite (Dyract), giomer (Shofu), and composite (GC). Each group of 40 specimens of each material was divided into four sub-groups. Each sub-group was stored in different solutions, distilled water, Bournvita, Horlicks, and Pediasure, for 60 days. The color change measurement was done using a spectrophotometer both before and after staining. Result: One-way analysis of variance depicted that when the ΔE values of the restorative material were tested against each of the child health drink, there was a statistically significant difference between all child health drinks (P < 0.00001). When restorative materials were compared with the staining agent on 60 days duration, except Pediasure and Control, others (i.e. Horlicks and Bournvita) showed a statistically high significance (P < 0.05). Conclusion: Bournvita caused the highest color changes in 60 days time interval, followed by Horlicks and Pediasure. When the discoloration of several materials is studied, the highest level of discoloration was observed in the compomer, followed by the giomer, and the lowest level in the composite.

Esthetic Rehabilitation of Congenitally Peg-Shaped Lateral Incisors Using the Injectable Composite Resin Technique: A Clinical Report.

This report details the esthetic dental rehabilitation of a patient with peg-shaped and malformed lateral incisors, conditions that stem from congenital anomalies in tooth formation, using the injectable composite resin technique (ICRT). The ICRT clinical workflow initiates with a smile analysis and precise shade matching, followed by the construction of a diagnostic wax-up crafted according to esthetic and functional guidelines. Subsequently, a mock-up is developed to ensure that the planned restorations fulfill the patient's functional requirements and esthetic expectations. A transparent silicone index is employed to accurately transfer the patient-approved wax-up into the mouth, utilizing injectable flowable composite resin. This method enhances treatment predictability and ensures that the final direct restoration precisely reflects the approved design within a reasonable chairside timeframe.

Enhancing Aesthetics and Functionality of the Teeth Using Injectable Composite Resin Technique.

In order to prepare composite restorations without the requirement for tooth preparation, the injectable composite resin technique uses a clear silicone index in a minimally invasive direct approach to imitate a diagnostic wax-up. This case report features a 34-year-old female patient having aesthetic and functional concerns, notably spacing between the teeth, insufficient tooth visibility, and diastema in the upper anterior region. Upon clinical examination, spacing and midline diastema were observed. The maxillary incisors and canines were to have composite veneers made as part of the treatment plan. A wax-up and transparent silicone index was prepared following the assessment of a try-in of the prepared mock-up. Subsequenty, for restoring the teeth, a clear silicone index was used to inject and polymerize the flowable composite. The desired outcomes included elongated teeth to enhance visibility, closure of diastemas, and reshaping of the canines. Over a 12-month follow-up period, the patient exhibited no signs of soft tissue inflammation or significant wear. The described technique is characterized by its minimal invasiveness, cost-effectiveness, and suitability for definitive and provisional restorations. Desirable results can be achieved by appropriate planning and adhering to a meticulous planning while minimizing tooth structure loss.

Color stability of CAD-CAM hybrid ceramic materials following immersion in artificial saliva and wine.

PURPOSE: To examine the color stability of 3D-printed and milled, interim, and definitive, restorative materials after immersion in artificial saliva and wine for 1, 3, and 6 months. MATERIAL AND METHODS: The study used a 2 × 5 factorial design with 10 subgroups, including 2 immersion liquids (artificial saliva and wine) and 5 manufacturing technology and restorative material combinations (n = 10). Color measurements were taken using a contact-type digital spectrophotometer (CM-2600d Spectrophotometer; Konica Minolta Healthcare Americas Inc) before immersion and at 1 month (T1), 3 months (T3), and 6 months (T6) after immersion. The CIE2000 system was used to calculate quantitative measurements of color differences in ΔE00, and comparisons were made to the acceptability threshold (AT) and perceptibility threshold (PT). Repeated measures of ANOVA (α = 0.05) were used to compare differences in color changes between manufacturing technology/restorative material-immersion liquid combinations at T1, T3, and T6. RESULTS: To compare the effect of immersion liquid and time on the manufacturing technology/restorative material groups, the ΔE00 values were compared to the PT of 0.8 and the AT of 1.8. Wine caused significant color changes in ΔE00 values beyond the PT and AT values in all groups at all time intervals, except for the AT value of milled definitive crowns (hybrid nano-ceramic material). Wine immersion caused significant ΔE00 for all manufacturing technology/restorative material groups at all time intervals (1 month, 3 months, and 6 months) when compared to artificial saliva immersion (all p < 0.001). CONCLUSION: Upon exposure to artificial saliva, 80%-100% of samples from all groups remained within the acceptable and perceptible color change thresholds. The wine had significant chromogenic effects on all tested restorative materials, however, the milled definitive crowns (hybrid nano-ceramic material) showed the greatest color stability. For patients with heavy wine consumption, 3D-printed definitive crowns (hybrid ceramic-filled material) may show discoloration exceeding acceptable and perceptible color change limits.

Evaluation of minimally invasive esthetic crown lengthening using an open flap versus flapless surgical approach: A randomized controlled clinical trial.

OBJECTIVES: Esthetic crown lengthening (ECL) is commonly advocated to treat patients with altered passive eruption (APE). Since the introduction of the minimally invasive surgical concept, a limited number of studies have investigated this technique in a standardized manner, with further studies required to verify the validity and predictability of the minimally invasive FL-technique. The current randomized trial compares a minimally invasive (ECL), using piezosurgery with flapless-approach (FL), versus an open-flap (OF) approach in the management of patients with APE Type 1B. MATERIALS AND METHODS: Twenty-four patients diagnosed with APE Type 1B were randomly assigned into test (FL) with tunneling approach or control (OF) group with minimally invasive flap reflection (n = 12/group). Postoperative pain was assessed during the first 48 h. Gingival margin (GM) level relative to a custom-made stent (rGM) and patient satisfaction were assessed preoperative, immediately after surgery, at 3 and 6 months postsurgically. Postoperative swelling was reported for the first week postsurgically. Plaque index (PI), bleeding on probing (BoP), clinical attachment level (CAL), pocket depth (PD) and pink esthetic score (PES), were evaluated at baseline and 6 months. Linear regression analysis was conducted for pain. RESULTS: OF-group reported significantly higher pain and swelling scores than FL-group during the first 48 h (p < 0.05). FL-group showed no significant differences regarding rGM between 3 and 6 months, in contrast to OF-group, where a significant decrease in rGM was notable (p < 0.05). No significant differences in PI, BoP, CAL, PD, PES, and patient satisfaction scores were evident between groups (p > 0.05). Regression analysis demonstrated that treatment and gender were significant predictors for pain (p < 0.05). CONCLUSIONS: Within the current study's limitations, piezo-surgical ECL with FL-approach presented significantly lower postoperative pain, swelling, and early GM stability compared to OF-approach. CLINICAL SIGNIFICANCE: Piezosurgical ECL with a FL-approach can be considered a predictable technique with advantages over the OF-approach in the management of patients with APE Type1B.

The Influence of Thickness on Light Transmission for Pre- and Fully Crystallized Chairside CAD/CAM Lithium Disilicate Ceramics.

AIM: This in vitro study aimed to compare the light-transmission properties of two chairside CAD/CAM lithium disilicate (LD) ceramics (a novel fully crystallized and a traditional pre-crystallized) across varying thicknesses. MATERIALS AND METHODS: One hundred flat specimens were obtained from precrystallized (e.max CAD, Ivoclar Vivadent, Schaan, Liechtenstein) and fully crystallized (LiSi GC Block; GC, Tokyo, Japan) LD at five different thicknesses (0.5, 0.75, 1.0, 1.50 and 2.0 mm). All specimens were polished with a polishing system for lithium disilicate restorations following recommendations from the manufacturer. Light transmission was evaluated with a radiometer. The statistical analysis between e.max CAD and LiSi GC Block was performed using a Mann-Whitney test for each thickness at a significance level of 0.05 (p < 0.05), followed by a Kruskal-Wallis test to compare the light transmission between the thicknesses of e.max CAD and LiSi GC Block. RESULTS: Light transmittance was significantly affected by ceramic thickness. The 0.5 mm thick specimens exhibited the highest transmittance values compared to all other groups, while a light transmittance of 0.00 was observed in the 2.0 mm thick specimens for both e.max CAD and LiSi GC Block. In the comparison between e.max CAD and LiSi GC Block according to thickness, there was a statistically significant difference exclusively between groups with a thickness of 1.50 mm (p = 0.002). CONCLUSIONS: Light transmission for pre- and fully crystallized CAD/CAM lithium disilicate ceramics only showed a statistical difference at the thickness of 1.50 mm (p = 0.002). E.max CAD demonstrated acceptable light transmission up to a thickness of 1.5 mm. CLINICAL SIGNIFICANCE: A thickness of 2 mm for chairside CAD/CAM lithium disilicate ceramics, whether pre-crystallized or fully crystallized, necessitates the use of dual-cure resin luting cement due to reduced light transmission.

Aesthetic outcomes of different materials for delayed, single-tooth restorations for immediately placed implants. A randomized controlled clinical trial.

OBJECTIVES: The aim of this study is to compare the aesthetic outcomes of metal porcelain (C), lithium disilicate (T1) and porcelain-layered zirconium (T2) immediate implant-supported single crowns in the anterior maxilla. MATERIALS AND METHODS: Forty-five immediate dental implants were provided for 45 patients that required the extraction of a single tooth in the anterior maxilla. A temporary prosthesis was provided at 8 weeks after placement followed by the final prosthesis at 24 weeks post-implantation. The patients were randomly allocated into 3 groups: 15 patients in the control group (C) received a metal-porcelain restoration, 15 patients (T1) received a lithium disilicate (LD) restoration and 15 patients (T2) received a porcelain-layered, zirconium (Z) restoration. Pink (PES) and White (WES) esthetic scores, radiographic bone levels, periodontal parameters and patient's esthetic satisfaction using a visual analogue scale (VAS) were evaluated at the time of final restoration placement (t0) and at 12-months post-loading (t12). RESULTS: No implants were lost during the duration of this study. Statistically significant higher WES and VAS scores (p < 0.05) were recorded in T1 vs C and T1 vs T2 groups respectively. Similar radiographic bone levels and periodontal parameters were recorded in all groups. CONCLUSION: Within the limitations of this study, it was concluded that T1 restorations provided better WES outcomes when compared to C restorations and better VAS scores when compared to T2 restorations at 12 months post-loading. Besides, different material interphases did not have an impact in PES, bone levels or periodontal parameters. CLINICAL RELEVANCE: There is limited data comparing aesthetic outcomes of implant supported single crowns made of different ceramic materials based on accepted and comparable indexes and the evaluation of the patient's perspective regarding these aesthetic outcomes.