Facial morphology analysis of children with non-syndromic cleft lip and palate in a local population.

Objectives: To study the facial morphology in children with non-syndromic cleft lip and palate by applying numerical facial analysis on photographs for planning and evaluating treatment outcomes. Methods: This descriptive study was conducted from March 2020 to July 2020 in the Department of Oral Pathology, University of Health Sciences and Cleft Lip and Palate Hospital, Lahore Pakistan. A total of 104 patients of both genders with an age range from three months to thirteen years were included. Photographs of the participants were taken to measure facial anthropometrical landmarks including facial height, nose width, mouth width and inter canthal distance. The association between facial measurements with gender and phenotype and across age groups were computed keeping the confidence level at 95%. Results: Mean age of the children was 72.43±44.2 months with slight male predominance. Thirty-one percent presented with bilateral cleft lip and palate followed by unilateral cleft lip and plate. Total mean facial height, nose width and mouth width were found to be 143.46±21.52mm, 32.24±5.03mm and 33.71±4.38mm respectively. Intercanthal distance was measured to be 31.04±5.99mm. Statistically significant association was observed between gender and facial height, nose width, mouth width and Intercanthal distance. Conclusion: Facial anthropometric measures done on frontal photographs can be used to identify the facial landmarks in children with non-syndromic cleft lip and palate in low resource stings that may help surgeons in getting better aesthetic outcomes. These landmarks vary between ethnic groups therefore these should be specific to a particular race and ethnicity so as to ensure proper aesthetics and improved quality of life for the children of all nations.

Correlation Between Nose-to-Chin Distance and Other Measurements Used to Determine Occlusal Vertical Dimension.

OBJECTIVES: Accurate occlusal vertical dimension (OVD) establishment is an essential component of prosthodontic treatment. No accurate approach exists to determine the appropriate OVD for patients without posterior teeth. This study aimed to correlate the accuracy of the nose-to-chin distance with various facial measurements and thumb length in dentulous and edentulous Saudi patients. MATERIALS AND METHODS: The participants comprised 100 fully dentulous Saudi male dental students aged 20-30 years (group 1) and 20 completely edentulous patients aged 60-70 years (group 2). We evaluated the correlations between the OVD (nose-to-chin distance) and the distance from the pupil to the corner of the mouth, the vertical length at midline of the nose (from subnasion to glabella), the distance from the outer canthus of one eye to the inner canthus of the other, twice the distance between the inner canthi, and the distance from the thumb tip to the index fingertip. STATISTICAL ANALYSIS: Spearman's correlation and regression analysis were performed to analyze and assess the correlations between the clinically measured nose-to-chin distance and other parameters, with significance set at 0.05. RESULTS: In edentulous patients, the results showed a significant, strong, positive correlation between the nose-to-chin distance and the distance between the pupil and the mouth corner. In dentate subjects, a significant, strong, positive association was found between the nose-to-chin distance and the distance from the outer canthus of one eye to the inner canthus of the other. The linear regression analysis revealed that the distance between the pupil and the mouth corner in edentulous patients significantly predicted the OVD. CONCLUSIONS: In both groups, the distance from the outer canthus of one eye to the inner canthus of the other and the distance from the pupil to the mouth corner were reliable and accurate for OVD measurements. These could be considered appropriate methods for OVD determination during full-mouth rehabilitation.

Truth Lies in the Depths: Novel Insights into Facial Aesthetic Measurements from a U.S. Survey Panel.

BACKGROUND: Aesthetic facial bone surgery and facial implantology expand the boundaries of conventional facial surgery that focus on facial soft tissue. This study aimed to reveal novel aesthetic facial measurements to provide tailored treatment concepts and advance patient care. METHODS: A total of n=101 study participants (46 females and 55 males) were presented with 120 patient portraits (frontal images in natural head posture; 60 females and 60 males) and asked to assess the facial attractiveness (scale 0-10; "How attractive do you find the person in the image?") and the model capability score (MCS; scale 0-10; "How likely do you think the person in the image could pursue a modelling career?"). For each frontal photograph, defined facial measurements and ratios were taken to analyse their relationship with the perception of facial attractiveness and MCS. RESULTS: The overall attractiveness rating was 4.3 ± 1.1, while the mean MCS was 3.4 ± 1.1. In young males, there was a significant correlation between attractiveness and the zygoma-mandible angle (ZMA)2 (r= - 0.553; p= 0.011). In young and middle-aged females, MCS was significantly correlated with facial width (FW)1-FW2 ratio (r= 0.475; p= 0.034). For all male individuals, a ZMA1 value of 171.79 degrees (Y= 0.313; p= 0.024) was the most robust cut-off to determine facial attractiveness. The majority of human evaluators (n=62; 51.7%) considered facial implants a potential treatment to improve the patient's facial attractiveness. CONCLUSION: This study introduced novel metrics of facial attractiveness, focusing on the facial skeleton. Our findings emphasized the significance of zygomatic measurements and mandibular projections for facial aesthetics, with FI representing a promising surgical approach to optimize facial aesthetics. LEVEL OF EVIDENCE IV: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

A narrative review on techniques of iris replication in an ocular prosthesis.

The disfigurement associated due to the loss of an eye can cause a significant physical and psychological disturbance. Psychological distress among such unfortunate patients can be reduced by providing an artificial eye. Rehabilitating such patients with an ocular defects is the most challenging task for a prosthodontist. The custom-made ocular prostheses are preferred over the prefabricated stock eye shells as it provides intimate contact with the tissue bed, enabling an ideal fit. For an esthetic ocular prosthesis, the precise positioning of an iris is a primary requirement to avoid the squint eye appearance. Various case reports are documented in the literature for centralizing the iris in the prosthetic eye. This review article explores the established methods and techniques for positioning the iris in a custom-made ocular prosthesis.

Do the Most Attractive Faces of Patients With Class II Division 1 Malocclusion Differ From Those With the Least Attractive Faces in Terms of Angular and Proportional Measurements Assessed on Frontal and Lateral Photographs?

Background This study investigated the facial angles and proportions affecting facial aesthetics in patients with skeletal class II division 1 malocclusion between those labeled the most attractive and least attractive in each gender. Methodology The study sample included pretreatment extraoral photographs of 60 patients (30 males and 30 females) with skeletal class II division 1 malocclusion according to the ANB angle aged between 18 and 21 years. A panel of 240 laypersons (aged 20-25 years; the average age of 22.5 ± 0.37 years; 120 males and 120 females) scored the aesthetic evaluation of photographs using the visual analog scale (VAS). Two groups were created according to the mean aesthetic scores of each photograph, namely, the most attractive group with the highest aesthetic scores, and the least attractive group with the least aesthetic scores. A total of 12 patients in each group were selected. Subsequently, their angular and proportional measurements on the frontal and lateral photographs were calculated. Independent-sample t-tests were used to determine if there were significant differences in these measurements between the two groups. Results There was no significant difference in frontal variables between the most attractive and least attractive groups in each gender. The angle NPog-FH was significantly greater in the most attractive males than in the least attractive males, while there was no significant difference between the most attractive and least attractive females regarding any of the profile variables. Conclusions The most attractive females with class II division 1 were similar to the least attractive on evaluating the frontal and profile variables. In contrast, the most attractive males with class II division 1 malocclusion had more protrusion in the chin than the least attractive male patients, with no differences in other profile and frontal variables. These findings suggest considering the chin position during the diagnosis and treatment planning of class II division 1 malocclusion patients.

Analysis of the Facial Measurements and Dental Arch Dimensions for the Construction of Dental Prostheses among Adult Yemenis.

AIM: To investigate the dental arch dimension (width, length, and height) and facial measurements including inner-canthal width (ICW), bizygomatic width (BZW), inter-alar width (IAW), and mouth width (MW), and to assess the correlation between these facial measurements and dental arch width (canine width [CW], inter-first premolar width [I1PW], and inter-first molar width [I1MW]), to establish a preliminary reference for artificial teeth selection in Yemeni adult. MATERIALS AND METHODS: The study included 80 individuals (40 males and 40 females) with symmetrical faces and normal class I occlusion ranging in age from 20 to 35. Maxillary and mandibular stone casts were made for each individual. The dimensions of dental casts and facial measurements, including ICW, BZW, IAW, and MW, were assessed using a digital caliper. The collected data were analyzed by using the SPSS software program. The descriptive statistics for each measurement were made. Differences between males and females were tested using an independent-sample t-test with p-values below 0.05 considered significant. Pearson correlation coefficient between facial measurements and dental arch width was also done. RESULTS: Most dental arch dimensions and facial measurements exhibited larger mean values in the male than in the female group, with the greatest significant difference in the maxillary dental arch width and the lowest in mandibular dental arch length. A highly significant correlation is observed between ICW and maxillary canine width (CW) (r = 0.318, p = 0.004). In contrast, no significant correlation between dental arch width and BZW, IAW, and MW is shown. CONCLUSIONS: Within this study's limitations, the ICW can determine the ideal dimension of the artificial teeth in the anterior maxillary arch. While the other facial parameters, including BZW, IAW, and MW, cannot be used for artificial teeth selection in Yemeni populations. CLINICAL SIGNIFICANCE: The findings of this study established a reference database of facial measurements and their correlation to dental arch and teeth width in Yemeni populations. So, it can be implemented in artificial teeth and dental prostheses design and construction.

Older adults' facial characteristics compared to young adults' in correlation with edentulism: a cross sectional study.

BACKGROUND: Facial ageing is a result of superficial wrinkling combined with changes to the underlying soft tissues and skeleton. The influence of tooth loss, as a geriatric characteristic, on facial appearance is still poorly explained. The aim was to evaluate the facial characteristics of older adults, correlate these characteristics with the dentition and make comparisons with young adults using a non-invasive 3D methodology. METHODS: 90 participants older than 65 years, classified into 3 subgroups (edentulous, partially edentulous, toothed) and 30 young adults were evaluated. Their faces were scanned with an optical Artec 3D-scanner. Cephalometric analyses were made using the RapidForm computer program. An independent t-test and ANOVA were used for the comparisons. Pairwise, post-hoc tests were applied with respect to the significant differences (P < 0.05). RESULTS: The faces of older adults are wider and longer because of the longer middle facial height. Older adults also have a longer upper lip, a larger nose, a smaller nasolabial angle (due to the nasal ptosis), narrower upper- and lower-lip vermilions and larger facial and lower-facial-height angles, resulting in a flat facial profile. The facial changes due to ageing are the most pronounced in the edentulous. In comparison with the toothed, they have a smaller facial height due to the smaller lower facial height, larger nasolabial angle, smaller mouth width, shorter upper lip and narrower lip vermilions. Their profile is flatter and their lips are more retruded. CONCLUSIONS: The proportions of the whole face are changed in older adults and they are the most expressed when this is combined with tooth loss.

Cranial and facial inter-landmark distances and tissue depth dataset from computed tomography scans of 388 living persons.

Computed tomography (CT) scans of 388 living adults of both sexes were collected from four self-identified ancestry groups from the United States (African, Asian, European, and Hispanic). Scans were acquired from multiple institutions and under a variety of scanning protocols. Scans were used to produce 3D bone and soft tissue models, from which were derived cranial and facial inter-landmark distances (ILDs) and soft tissue depth measurements. Similar measurements were made on 3D facial approximations produced by ReFace software. 3D models and all measurements were obtained using MimicsR software. These measurements are useful for facial approximations of unidentified decedents and for investigations into human variation between and among ancestry groups and sexes.

Reference standards for facial measurements in early third trimester South African fetuses, and the effect of maternal and fetal characteristics.

Fetal alcohol spectrum disorder (FASD) is a major problem worldwide and dysmorphic facial features may be a prenatal biomarker for FASD. Deviations from normal facial development cannot be explored before establishing the normal variation in a specific population, since ethnic differences may exist.Objectives: Main objective: to establish reference standards for 23 facial measurements on 3D ultrasound volumes obtained between days 196 and 224 of gestation in healthy unexposed South African fetuses from an area with historically high alcohol consumption prevalence and a population group with no existing normative values. Secondary objective: to assess the confounding effect of maternal and fetal characteristics.Design: This study involves 97 women (including 43 smokers) who had been enrolled in the Safe Passage Study (SPS), a large prospective multinational cohort study assessing the effects of prenatal alcohol exposure. They had adequate 3 D ultrasound volumes of the fetal face acquired at 28+0-31+6 weeks in singleton pregnancies without comorbidities, congenital abnormalities or exposure to alcohol, marijuana, or methamphetamines from 4 weeks before conception.Participants, materials, setting, methods: The participants were recruited from two residential areas of low socioeconomic status in Cape Town. Meticulous information was collected on maternal and pregnancy characteristics, including alcohol use at different time points. Gestational age (GA) was based on ultrasound biometry before 24 weeks, and 3D ultrasound volumes were acquired trans-abdominally from a sagittal and axial plane of the fetal face. Volumes were independently assessed offline by two observers and the image with the best landmark definition was used for 23 facial measurements, representing features previously described in children with FASD. The relation to the exact GA was assessed by regression analysis, the expected mean value and standard error of the estimate (SEE) was determined to transform all raw measurements into z-scores, and the effect of possible confounders on z-scores was assessed by ANOVA.Results: Ten variables changed significantly with advancing GA (extraocular diameter, anteroposterior, medio-lateral and supero-inferior ocular diameter, ocular volume, interlens distance, prenasal thickness, nasal bone length, nose length and nose protrusion) and thirteen did not (interocular distance; interocular: extraocular diameter ratio, prenasal thickness: nasal bone length ratio, pronasal-subnasal distance, subnasal-mouth distance, philtrum length, upper vermillion thickness, nose-philtrum angle, maxillary angle, facial height, facial protrusion, frontomaxillary facial angle and maxilla-nasion-mandible angle). Reference values (expected mean and SEE) for the 23 measurements were established for each day.The z-scores of all facial measurements were not independently affected by maternal age, parity, gravidity, smoking or body mass index, but infant sex and birthweight z-score significantly influenced several z-scores (infant sex for extraocular, medio-lateral, and supero-inferior ocular diameter, ocular volume, prenasal thickness and nose protrusion; birthweight z-score for extraocular diameter, interocular and interlens distance, nose protrusion and maxillary angle).Limitations: GA was not always confirmed by first trimester ultrasound and some measurements could not be obtained in all cases due to suboptimal image quality. The cohort included few heavy smokers so an effect of heavy or continued smoking cannot be ruled out, and the effect of ethnicity was not assessed.Conclusions: These are the first local reference standards for fetal facial measurements and, to our knowledge, the first reference standards for the supero-inferior ocular diameter, face protrusion, upper vermillion thickness, maxillary angle, and nose-philtrum angle. They were broadly in keeping with published references, with small discrepancies explained by minor differences in technique. Even in this narrow GA window, the distribution of many variables changed over time and normal variation was significantly influenced by fetal sex and birthweight z-score. The possible confounding effect of these factors needs to be considered when assessing the impact of harmful exposures like alcohol on facial development.

Evaluating the agreement and reliability of a web-based facial analysis tool for rhinoplasty.

PURPOSE: Rhinoplasty is one of the most common and challenging plastic surgery procedures. Facial analysis is a crucial step in planning. Utilizing three-dimensional (3D) model of a patient's face is an emerging way of performing facial analysis. This paper evaluates the agreement and reliability of facial measurements taken using a web app, located at digitized-rhinoplasty.com, that utilizes 3D models of the patient's face. METHODS: Eleven measurements were calculated on 16 human subjects. Three methods of measurements were performed: direct measurements on human subjects' faces, measurements on 2D photographs, and measurements on 3D models of face scans. The Bland-Altman plot is used for testing the agreement between the web app and the well-known Blender 3D modeling software. Intra-rater and inter-rater reliability was calculated and compared for 2D and 3D methods using the intraclass correlation coefficient (ICC) method. The statistical analysis methods were checked for the normality and homoscedasticity assumptions. RESULTS: The results indicate that the web app and Blender software show agreement within 95% confidence limits. The web app performs well in intra-rater and inter-rater reliability statistical analysis. The web app's reliability scores are consistently better than facial analysis software which was found highly reliable in a previous study. We also compare the methods of measurements in terms of time, ease of use, and cost. CONCLUSION: The utilization of 3D computer modeling for facial analysis has its advantages and started to become more common due to recent advances in technology. The web app utilizes 3D face scans for pre-operative planning and post-operative evaluation of facial surgeries. The web app performs well in agreement and inter-/intra-reliability analysis and performs consistently better than software that works utilizing 2D photographs. The web app provides accurate, repeatable, affordable, and fast facial measurements for facial analysis when compared to direct and 2D methods.

Mini-microform cleft lip with complete cleft alveolus and palate: A case report.

Cleft lip and cleft alveolus are caused by incomplete fusion of the frontonasal and maxillary prominences. However, milder forms of cleft lip are rarely accompanied by cleft alveolus. Here, we report a rare case of mini-microform cleft lip with complete cleft alveolus and cleft palate. No findings suggestive of cleft lip were evident on initial examination. However, three-dimensional facial measurements confirmed the presence of cleft lip despite no evidence of orbicularis oris muscle (OOM) rupture on ultrasonography. Collapsed nostril, as observed in this case, is usually associated with OOM rupture. However, it can also be caused by skeletal abnormalities, such as cleft alveolus. Three-dimensional facial measurements and ultrasonography can assist in accurate diagnosis when visual examination is ambiguous.

Digitizing rhinoplasty: a web application with three-dimensional preoperative evaluation to assist rhinoplasty surgeons with surgical planning.

PURPOSE: Rhinoplasty is one of the most common and challenging plastic surgery procedures. The results of the operation have a significant impact on the facial appearance. The planning is critical for successful rhinoplasty surgery. In this paper, we present a web application designed for preoperative rhinoplasty surgery planning. METHODS: The application uses the three-dimensional (3D) model of a patient's face and facilitates marking of an extensive number of facial features and auto-calculation of facial measurements to develop a numerical plan of the surgery. The web application includes definitions, illustrations, and formulas to describe the features and measurements. In addition to the existing measurements, the user can calculate the distance between any two points, the angle between any three points, and the ratio of any two distances. We conducted a survey among experienced rhinoplasty surgeons to get feedback about the web application and to understand their attitude toward utilizing 3D models for preoperative planning. RESULTS: The web application can be accessed and used through any web browser at digitized-rhinoplasty.com. The web application was utilized in our tests and also by the survey participants. The users successfully marked the facial features on the 3D models and reviewed the auto-calculated measurements. The survey results show that the experienced surgeons who tried the web application found it useful for preoperative planning and they also think that utilizing 3D models is beneficial. CONCLUSIONS: The web application introduced in this paper helps analyzing the patient's face in details utilizing 3D models and provides numeric outputs to be used in the rhinoplasty operation planning. The experienced rhinoplasty surgeons that participated to our survey agree that the web app would be a beneficial tool for rhinoplasty surgeons. We aim to further improve the web application with more functionality to help surgeons for preoperative planning of rhinoplasty.

A novel approach for pre-surgical evaluation of facial morphometry in children using magnetic resonance imaging scans of the brain: a feasibility analysis / Un enfoque novedoso para la evaluación prequirúrgica de la morfometría facial en niños mediante imágenes por resonancia magnética de cerebro: un análisis de viabilidad

Pre-surgical evaluation of facial morphometry is frequently warranted for children with facial dysmorphism. Though many methods utilized previously for such purposes, data is scarce on using magnetic resonance (MRI) brain images for such purposes. The purpose of this study was to appraise the feasibility of utilizing MRI brain scans done in epilepsy imaging protocol to assess facial morphometry. Measurements of the face; orbit, mouth, and nose of children aged 1 to 7 years were obtained using T1 sagittal, T2 axial and three dimensional (3D) MRI images of the brain (n=20). Ability to obtain facial measurements, inter and intra-observer variability calculated. The mean age of the studied children was 4±2 years, of which 40% (n=8) were boys, and 60% (n=12) were girls. Obtaining facial measurements were reliable with high intra-observer (α=0.757 to 0.999) and inter-observer agreements (α=0.823 to 0.997). The landmarks of the cranium, upper face, and upper nose could be identified (100%) in both two dimensional (2D) and 3D images when such landmarks were contained in the imaging field of view (FOV). Landmarks of lower nose, (subalar width = 0%) or mouth (0%) were not contained in the FOV of 2D images, but contained in 3D images (100%). Both 2D and 3D images did not allow assessment of lower face or the mandible as such landmarks were not contained in the FOV.We conclude thatBrain MRIs performed to evaluate cerebral pathology can be executed to assess facial measurements, provided the FOV of the scan is adjusted to include all significant landmarks.

La evaluación prequirúrgica de la morfometría facial con frecuencia se justifica para niños con dismorfismo facial. Aunque muchos métodos se utilizaron anteriormente para tales fines, los datos son escasos sobre el uso de imágenes cerebrales por resonancia magnética (MRI) para tales fines. El propósito de este estudio fue evaluar la viabilidad de utilizar resonancias magnéticas cerebrales realizadas en el protocolo de imágenes de epilepsia para evaluar la morfometría facial.Medidas de la cara, la órbita, la boca y la nariz de niños de 1 a 7 años se obtuvieron mediante imágenes de resonancia magnética cerebral T1 sagital, axial T2 y tridimensional (3D) del cerebro (n = 20). Se obtuvieron las medidas faciales, y fue calculada la variabilidad inter e intraobservador.La edad de los niños estudiados fue de 4 ± 2 años, de los cuales el 40% (n = 8) hombre y el 60% (n = 12) mujer. La obtención de medidas faciales fue confiable con altos acuerdos intraobservador (α = 0,757 a 0,999) e interobservador (α = 0,823 a 0,997). Los puntos de referencia del cráneo, la cara superior y la nariz superior se pudieron identificar (100%) tanto en imágenes bidimensionales (2D) como en 3D cuando dichos puntos de referencia estaban contenidos en el campo de visión de la imagen (FOV). Los puntos de referencia de la parte inferior de la nariz (ancho subalar = 0%) o la boca (0%) no estaban contenidos en el campo de visión de las imágenes 2D, sino que estaban contenidos en las imágenes 3D (100%). Tanto las imágenes 2D como las 3D no permitieron la evaluación de la parte inferior de la cara o la mandíbula, ya que tales puntos de referencia no estaban contenidos en el campo de visión.Concluimos que las resonancias magnéticas cerebrales realizadas para evaluar la patología cerebral se pueden usar para evaluar las medidas faciales, siempre que el campo de visión de la exploración se ajuste para incluir todos los puntos de referencia importantes.

Positioning of iris in an ocular prosthesis: A systematic review.

AIM: To evaluate different methods, techniques, and concepts documented in the literature to assess iris positioning accurately to the related dimensions needed to effectuate maxillofacial rehabilitation of ocular prosthesis. SETTINGS AND DESIGN: This systematic review was conducted as per the PRISMA guidelines which is the most opted reporting protocol. MATERIALS AND METHODS: Two electronic databases PubMed and Cochrane Library) were searched for manuscripts published from 1969 till September 30, 2019. An electronic search (of peer review restricted to English language dental literature was conducted to identify the relevant scientific article on iris positioning in maxillofacial prostheses. Two observers independently read the abstracts and selected 17 full text articles fulfilling the inclusion criteria. STATISTICAL ANALYSIS USED: No meta-analysis was conducted due to heterogeneity of data obtained. RESULTS: All the 17 documented articles related to determination of the iris positioning to perform maxillofacial prosthetic rehabilitation depicting the use of a strip of plastic template, a Boley's gauge, a millimeter ruler, a pupillometer, window light, an ocular locator with fixed caliper, inverted anatomic tracings, a transparent graph grid were reviewed systematically. CONCLUSION: Currently, there is no evidence in the form of a systematic review of the available literature discussing the best technique available for perfectly matching the iris positioning. However, the latest techniques making use of digital technology such as digital photography, is believed to be more precise for iris positioning in the ocular prosthesis.

An Anthropometric Study of Cranio-Facial Measurements and Their Correlation with Vertical Dimension of Occlusion among Saudi Arabian Subpopulations.

BACKGROUND: Determining and restoring physiological vertical dimension of occlusion (VDO) is the critical step during complete mouth rehabilitation. The improper VDO compromises the aesthetics, phonetics and functional efficiency of the prosthesis. Various methods are suggested to determine the accurate VDO, including the facial measurements in the clinical situations with no pre-extraction records. The generalisation of correlation between the facial measurements to VDO is criticised due to gender dimorphism and racial differences. Hence, it is prudent to verify the hypothesis of facial proportion and correlation of lower third of the face to remaining craniofacial measurements in different ethnic groups. The objective of the study was to evaluate the correlation of craniofacial measurements and OVD in the Saudi-Arabian ethnic group. METHODOLOGY: Total of 228 participants from Saudi-Arabian Ethnic group were randomly recruited in this cross-sectional study. Fifteen craniofacial measurements were recorded with modified digital Vernier callipers, and OVD was recorded at centric occlusion. The obtained data were analysed by using the Spearman's correlation and linear regression analysis. RESULTS: The Mean OVD in male participants was higher (69.25 ± 5.54) in comparison to female participants (57.41 ± 5.32). The craniofacial measurement of Exocanthion-right labial commissure and the Mesial wall of the right external auditory canal-orbitale lateral had a strong positive correlation with VDO. The strong correlation was recorded with a trichion-upper border of right eyebrow line and trichion-Nasion only in males. Meanwhile, the length of an auricle recorded the positive correlation in female participants. CONCLUSIONS: Being simple and non-invasive technique, craniofacial measurements and linear equations could be routinely utilised to determine VDO.

Art or Science? An Evidence-Based Approach to Human Facial Beauty a Quantitative Analysis Towards an Informed Clinical Aesthetic Practice.

BACKGROUND: Patients often seek guidance from the aesthetic practitioners regarding treatments to enhance their 'beauty'. Is there a science behind the art of assessment and if so is it measurable? Through the centuries, this question has challenged scholars, artists and surgeons. AIMS AND OBJECTIVES: This study aims to undertake a review of the evidence behind quantitative facial measurements in assessing beauty to help the practitioner in everyday aesthetic practice. METHODS: A Medline, Embase search for beauty, facial features and quantitative analysis was undertaken. SELECTION CRITERIA: Inclusion criteria were studies on adults, and exclusions included studies undertaken for dental, cleft lip, oncology, burns or reconstructive surgeries. The abstracts and papers were appraised, and further studies excluded that were considered inappropriate. The data were extracted using a standardised table. The final dataset was appraised in accordance with the PRISMA checklist and Holland and Rees' critique tools. RESULTS: Of the 1253 studies screened, 1139 were excluded from abstracts and a further 70 excluded from full text articles. The remaining 44 were assessed qualitatively and quantitatively. It became evident that the datasets were not comparable. Nevertheless, common themes were obvious, and these were summarised. CONCLUSION: Despite measures of the beauty of individual components to the sum of all the parts, such as symmetry and the golden ratio, we are yet far from establishing what truly constitutes quantitative beauty. Perhaps beauty is truly in the 'eyes of the beholder' (and perhaps in the eyes of the subject too). LEVEL OF EVIDENCE V: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Periorbital Biometric Measurements using ImageJ Software: Standardisation of Technique and Assessment Of Intra- and Interobserver Variability.

PURPOSE: To assess the reliability and repeatability of periorbital biometric measurements using ImageJ software and to assess if the horizontal visible iris diameter (HVID) serves as a reliable scale for facial measurements. METHODS: This study was a prospective, single-blind, comparative study. Two clinicians performed 12 periorbital measurements on 100 standardised face photographs. Each individual's HVID was determined by Orbscan IIz and used as a scale for measurements using ImageJ software. All measurements were repeated using the 'average' HVID of the study population as a measurement scale. Intraclass correlation coefficient (ICC) and Pearson product-moment coefficient were used as statistical tests to analyse the data. RESULTS: The range of ICC for intra- and interobserver variability was 0.79-0.99 and 0.86-0.99, respectively. Test-retest reliability ranged from 0.66-1.0 to 0.77-0.98, respectively. When average HVID of the study population was used as scale, ICC ranged from 0.83 to 0.99, and the test-retest reliability ranged from 0.83 to 0.96 and the measurements correlated well with recordings done with individual Orbscan HVID measurements. CONCLUSION: Periorbital biometric measurements using ImageJ software are reproducible and repeatable. Average HVID of the population as measured by Orbscan is a reliable scale for facial measurements.

A comparative study to find out the relationship between the inner inter-canthal distance, interpupillary distance, inter-commissural width, inter-alar width, and the width of maxillary anterior teeth in Aryans and Mongoloids.

BACKGROUND: One of the most confusing and difficult aspects of complete denture prosthodontics is the selection of appropriately sized maxillary anterior denture teeth. Various guidelines have been suggested for determining the size of anterior teeth, but different opinions have been reported regarding their significance. In the study reported here, the relationships between facial measurements and the width of maxillary anterior teeth in two ethnic groups, namely Aryans and Mongoloids, were determined. OBJECTIVE: The aims of the study were to determine the inner inter-canthal distance (ICAD), inter-pupillary distance (IPD), inter-commissural width (ICOW), inter-alar width (IAW), and the combined width of maxillary anterior teeth (CW) in Aryans and Mongoloids and to determine the relationships between these measurements. MATERIALS AND METHODS: Impressions of the teeth of 170 dentulous subjects (85 males and 85 females) were made with alginate then Type IV gypsum product was poured in. Measurements of the cast maxillary anterior teeth at their widest dimension (contact areas) were made with the Boley gauge. ICAD, IPD, ICOW, and IAW distances were also measured with a Boley gauge. RESULTS: For all 170 subjects, 85 Aryans and 85 Mongoloids, Pearson's correlation coefficient (r) for IAW, IPD, ICOW, ICAD, and CW was calculated. In Aryans, highly significant (P<0.001) but weak correlations were found between CW and IAW, IPD, and ICOW. In Mongoloids, a highly significant (P<0.001) and weak correlation was found only between CW and IPD. CONCLUSION: Within the limitations of this study, the results suggest that the IAW, IPD, and ICOW for Aryans and IPD for Mongoloids can be used as a preliminary method for determining the width of the maxillary anterior teeth in edentulous patients.

Facegram - Objective quantitative analysis in facial reconstructive surgery.

Evaluation of effectiveness in reconstructive plastic surgery has become an increasingly important asset in comparing and choosing the most suitable medical procedure to handle facial disfigurement. Unfortunately, traditional methods to assess the results of surgical interventions are mostly qualitative and lack information about movement dynamics. Along with this, the few existing methodologies tailored to objectively quantify surgery results are not practical in the medical field due to constraints in terms of cost, complexity and poor suitability to clinical environment. These limitations enforce an urgent need for the creation of a new system to quantify facial movement and allow for an easy interpretation by medical experts. With this in mind, we present here a novel method capable of quantitatively and objectively assess complex facial movements, using a set of morphological, static and dynamic measurements. For this purpose, RGB-D cameras are used to acquire both color and depth images, and a modified block matching algorithm, combining depth and color information, was developed to track the position of anatomical landmarks of interest. The algorithms are integrated into a user-friendly graphical interface and the analysis outcomes are organized into an innovative medical tool, named facegram. This system was developed in close collaboration with plastic surgeons and the methods were validated using control subjects and patients with facial paralysis. The system was shown to provide useful and detailed quantitative information (static and dynamic) making it an appropriate solution for objective quantitative characterization of facial movement in a clinical environment.

Three-dimensional facial analyses of Indian and Malaysian women.

CONTEXT: Facial measurements serve as a valuable tool in the treatment planning of maxillofacial rehabilitation, orthodontic treatment, and orthognathic surgeries. The esthetic guidelines of face are still based on neoclassical canons, which were used in the ancient art. These canons are considered to be highly subjective, and there is ample evidence in the literature, which raises such questions as whether or not these canons can be applied for the modern population. AIMS: This study was carried out to analyze the facial features of Indian and Malaysian women by using three-dimensional (3D) scanner and thus determine the prevalence of neoclassical facial esthetic canons in both the groups. SUBJECTS AND METHODS: The study was carried out on 60 women in the age range of 18-25 years, out of whom 30 were Indian and 30 Malaysian. As many as 16 facial measurements were taken by using a noncontact 3D scanner. STATISTICAL ANALYSIS USED: Unpaired t-test was used for comparison of facial measurements between Indian and Malaysian females. Two-tailed Fisher exact test was used to determine the prevalence of neoclassical canons. RESULTS: Orbital Canon was prevalent in 80% of Malaysian women; the same was found only in 16% of Indian women (P = 0.00013). About 43% of Malaysian women exhibited orbitonasal canon (P = 0.0470) whereas nasoaural canon was prevalent in 73% of Malaysian and 33% of Indian women (P = 0.0068). CONCLUSIONS: Orbital, orbitonasal, and nasoaural canon were more prevalent in Malaysian women. Facial profile canon, nasooral, and nasofacial canons were not seen in either group. Though some canons provide guidelines in esthetic analyses of face, complete reliance on these canons is not justifiable.