Study on combustion characteristics of glass fiber/phenolic resin composites.

In order to study the combustion characteristics of glass fiber/phenolic resin composites, a conical calorimeter was used to explore the combustion characteristics of glass fiber/phenolic resin composites in an aircraft frame under different thermal radiation intensities, and the fire hazard of the materials was evaluated by evaluation index, and the limiting oxygen index at different temperatures was explored by combining the high temperature oxygen index meter. The test results show that when the ambient temperature increases from 20 °C to 220 °C, the limiting oxygen index first increases from 86.6 % to 93.7 %, and then decreases to 84.4 %. The oxygen consumption and CO2 release increase with the increase of thermal radiation intensity during combustion, and the release of CO decreases with the increase of thermal radiation. The heat release rate curve of the test material has only 1 enhancement peak. The heat radiation intensity increased from 50 kW/m2 to 70 kW/m2, and the peak heat release rate of the test material combustion increased from 64.7 kW/m2 to 100.7 kW/m2. The rate of mass loss of materials accelerates with the increase of thermal radiation intensity; As the intensity of thermal radiation increases, the fire hazard of the material increases.

Contemporary Concepts of Adhesive Cementation of Glass-Fiber Posts: A Narrative Review.

(1) Background: Cementation of glass fiber posts to root canals has been associated with various failures, especially debonding. This narrative review aims to present the contemporary concepts concerning the adhesive cementation of glass fiber post and to discuss the optimal management of these factors. (2) Methods: Electronic search was performed in MEDLINE/Pub Med and Google Scholar using selected keywords examining the parameters post length, surface treatment of glass fiber posts, post space preparation and dentin pretreatment, resin cement selection, adhesive systems and hybrid layer formation, and clinical techniques. (3) Results: The search led to the selection of 44 articles. Epoxy resin-based endodontic sealers are recommended and the use of temporary cement in the root canal should be avoided. The minimum length of a glass fiber post adhesively cemented to a root canal is 5 mm. Irrigating the root canals with chlorhexidine, MTAD, or EDTA (alone or in combination with NaOCl) after post space preparation seems to enhance the bond strength. Silane application on the surface of the post seems to be beneficial. Concerning resin cements and adhesive systems, the results were rather inconclusive. Finally, resin cement should be applied inside the root canal with an elongation tip and photoactivation should be delayed. (4) Conclusions: Contemporary concepts of adhesive cementation of glass fiber posts can indeed improve the bond between glass fiber posts, resin cement, and root canal dentin, however, evidence coming from long-term randomized prospective clinical trials is needed in order to obtain safer conclusions.

Topographic analysis of fiber posts after surface disinfection with different methods

Aims: This study aims to comprehensively examine the surface morphology of fiber posts after undergoing various disinfection methods, utilizing scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). Materials and Methods: Twenty-one fiber posts were randomly allocated into seven experimental groups, each consisting of three samples. The disinfection methods employed were as follows: GC - no disinfection treatment; GAL - immersion in 70% alcohol, following the manufacturer's recommended protocol; GHP - soaking in 2.5% sodium hypochlorite for a duration of 10 minutes; GCL - soaking in 2% chlorhexidine gluconate for a period of five minutes; GAC - 30-second etching with 35% phosphoric acid; GPH - soaking in 10% hydrogen peroxide for a duration of 20 minutes; and GSL - autoclave sterilization. Following the disinfection procedures, SEM was employed to scrutinize the surface topography of the posts, while EDX was utilized to identify the chemical elements present on the sample surfaces. Subsequently, a descriptive analysis was conducted on the SEM images and EDX data. Results: SEM analysis revealed that all groups exhibited regions with epoxy resin-coated fibers alongside sections with exposed glass fibers. Analysis of the EDX data indicated that there were no significant differences in the predominant chemical elements across the groups. Carbon (C) and oxygen (O) registered the highest peaks, followed by silicon (Si), zirconium (Zr), sodium (Na), aluminum (Al), and calcium (Ca). Conclusions: The disinfection methods under investigation did not induce substantial alterations in the surface morphology of the fiber posts.

Effect of wrist orthoses on upper limb function, activities of daily living, and stress response.

Introduction: This study examined the effects on upper limb function, activities of daily living, and stress responses when wearing a wrist orthosis made of padded fiberglass or thermoplastic and provided essential information for selecting an orthosis. Methods: Thirty-one healthy adults performed two tests while not wearing a wrist orthosis, wearing a padded fiberglass wrist orthosis, and wearing a thermoplastic wrist orthosis. The Purdue Pegboard Test examined upper limb control. In the second test, the actions indicated by the Hand20 questionnaire were performed while wearing a wrist orthosis. An electrocardiogram was obtained before and after each test to identify any changes in sympathetic nervous system activity. Results: The Purdue Pegboard Test scores were significantly higher when not wearing a wrist orthosis than when wearing wrist orthosis, and the Hand20 scores for all question were significantly lower. Thermoplastic wrist orthoses had fewer restrictions for upper limb function compared to padded fiberglass wrist orthoses, however activities of daily living were more limited. The low frequency/high frequency ratio and high frequency measures showed no significant differences. Conclusions: Pegboard test scores and the Hand 20 scores suggest that a wrist orthosis causes restriction of upper limb function.

In vivo evaluation of a polyester and fiberglass composite intramedullary nail for femoral osteosynthesis in calves.

The objective of this study was to test a composite of polyester resin and fiberglass in the form of an intramedullary nail for osteosynthesis of femoral fractures in calves. The methodology was established based on a previous study that used a bovine femur finite element model to simulate fractures, which were then stabilized by the same nails as proposed in this study. General anesthesia was induced in six calves followed by fracture creation via an oblique incision in the middle third of the femoral diaphysis, and osteosynthesis was immediately performed by retrograde insertion of the composite nail. Locking was achieved by drilling the bone and nail without using a jig and introducing two stainless steel screws proximal and two distal to the fracture line. Five of the six calves achieved complete fracture healing after 60 days. No signs of incompatibility or toxicity of the composite were observed. However, limitations were observed during the surgery, such as difficulty in drilling the nail and trimming the remainder portion of the nail that extended beyond the length of the bone. Small fragments produced by these maneuvers were considered irritating to soft tissues during the postoperative period. It was also found that small cracks in the nail tended to propagate in the form of longitudinal fractures. In conclusion, an intramedullary nail made of polyester resin and fiberglass (a low-cost and easy-to-acquire material) was considered biocompatible and capable of allowing bone healing of femoral fractures in young cattle. However, the development of solutions for the reported limitations is crucial prior to recommending the proposed composite for clinical use.

Biobased polyester versus synthetic fiberglass casts for treating stable upper limb fractures in children: a randomized controlled trial.

BACKGROUND: Stable upper limb fractures, such as radius, ulna, or distal humerus fractures, are common pediatric orthopedic traumas that are traditionally managed with cast immobilization. The commonly used synthetic fiberglass cast is light and water resistant but may promote skin itchiness during casting, which is a common complaint of patients. In addition, these diisocyanate-based casts have been proven to be toxic and may cause asthma. Herein, we introduce a novel biobased polyester cast to compare its clinical outcomes and patient satisfaction with conventional synthetic fiberglass casts. METHODS: From Feb 2022 to Nov 2022, we undertook a single-center prospective randomized trial involving 100 children with cast-immobilized stable upper limb fractures. These patients were randomized into either biobased polyester or synthetic fiberglass groups. All patients were regularly followed up till the cast removal which occurred approximately 3-4 weeks after immobilizing. Objective clinical findings and subjective patient questionnaire were all collected and analyzed. RESULTS: According to the radiographs taken on the day of cast removal, there was no loss of reduction in both groups. The incidence of skin problems was 3.4 times higher in the synthetic fiberglass group than in the biobased polyester group. For the subjective questionnaire, the biobased polyester cast was preferred in every sub-item. CONCLUSIONS: Our study strongly suggested that the novel biobased polyester cast provides matching stability to conventional fiberglass casts and improves patient satisfaction in an eco-friendlier and safer way. TRIAL REGISTRATION: ClinicalTrials.gov Protocol Registration and Results System ( https://www. CLINICALTRIALS: gov/ ; ID: NCT06102603; Date: 26/10/2023).

Estudo in vitro de microdeformações ósseas comparando infraestruturas para próteses do tipo protocolo: impacto dos materiais cobalto-cromo e fibra de vidro reforçada com compósito / In vitro study of bone microdeformations comparing infrastructures for protocol-type prostheses: impact of cobalt-chrome materials and fiberglass reinforced with composite

Este estudo investigou a eficácia biomecânica de infraestruturas de próteses feitas de cobalto-cromo (CoCr) e compósito de fibra de vidro (FVRC), implantadas em mandíbulas edêntulas. A distribuição de densidade foi investigada utilizando um modelo ósseo sintético, equipado com extensômetros, para simular condições anatômicas e biomecânicas humanas. Os implantes de conexão interna cone morse fabricados pela Conexão Sistemas de Próteses, Arujá, São Paulo, Brasil, têm diâmetro e comprimento de 4.0mm e 13mm, respectivamente, e os intermediários protéticos selecionados foram Micro Unit Sólidos da mesma marca para plataforma cone morse, com altura de transmucoso 2,5 mm, foram utilizados para suportar as infraestruturas de próteses híbridas. Por meio de extensometria, mediu-se a deformação óssea sob carga ao redor dos quatro implantes, comparando as performances das infraestruturas CoCr e FVRC. Os resultados revelaram informações importantes sobre a seleção de materiais para infraestruturas de próteses, com foco específico nas barras de FVRC e CoCr. Os testes "in vitro" e análises estatísticas destacaram que as barras de FVRC produziram menores microdeformações em comparação com as de CoCr sob carga. Essa diferença foi estatisticamente significativa, indicando que a FVRC possui uma capacidade superior de absorver e distribuir carga de maneira mais eficiente. No entanto, ressalta-se a necessidade de estudos futuros, incluindo pesquisas clínicas, para explorar totalmente as implicações desses achados e aprimorar ainda mais as práticas de reabilitação oral com implantes (AU)

This study investigated the biomechanical effectiveness of prosthetic infrastructures made of cobalt-chromium (CoCr) and fiberglass composite (FGC), implanted in edentulous jaws. The density distribution was investigated using a synthetic bone model, equipped with strain gauges, to simulate human anatomical and biomechanical conditions. The morse cone internal connection implants manufactured by Conexão Sistemas de Próteses, Arujá, São Paulo, Brazil, have a length of 4.0mm and 13mm, respectively, and the prosthetic intermediates selected were Micro Unit Solids of the same brand for a morse cone platform, with a transmucosal height of 2.5 mm, were used to support hybrid prosthetic infrastructures. Using extensometry, bone deformation under load around the four implants was measured, comparing with the performance of the CoCr and FGC infrastructures. The results revealed important information about the selection of materials for prosthetic infrastructures, with a specific focus on FGC and CoCr bars. "In vitro" tests and statistical analyzes highlighted that FGC bars produced smaller microdeformations compared to CoCr bars under load. This difference was statistically significant, demonstrating that FGC has a superior capacity to absorb and distribute load more efficiently. However, the need for future studies, including clinical research, is highlighted to fully explore the implications of these findings and further improve oral rehabilitation practices with implants. (AU)

Clinical longevity of metallic versus fiberglass intraradicular posts: a systematic review / Longevidade clínica de pinos intraradiculares metálicos versus de fibra de vidro: uma revisão sistemática

Objective: This systematic review aims to compare the clinical longevity of metallic and fiberglass intraradicular posts in teeth with severely compromised crowns, utilizing randomized clinical trials and case reports published in the last eleven years. Material and Methods: The research was conducted on PubMed, Medline, Lilacs, and BBO databases using the first search strategy with the descriptors 'dental posts,' 'longevity,' 'fiberglass-reinforced posts' or 'metallic posts.' The second search strategy involved analyzing the references of articles identified by the first search. Both studies were carried out with stringent inclusion and exclusion criteria. Results: No statistically significant and clinically relevant differences in longevity were observed between metallic and fiberglass posts. Conclusion: The clinical success and durability of the restorative procedure using intraradicular posts primarily depend on the remaining amount around the post (ferrule), the type and position of the tooth in the arch (impacting the masticatory forces exerted on the restored tooth), and the correct application of the cementation technique. It is noteworthy that fiberglass posts offer substantial advantages by presenting a modulus of elasticity similar to dental structure, ensuring a more homogeneous distribution of masticatory forces and reducing the risk of fractures. These findings have practical implications for material selection in restorative procedures involving intraradicular posts.(AU)

Objetivo: Esta revisão sistemática visa comparar a longevidade clínica de pinos intrarradiculares metálicos e de fibra de vidro em dentes com coroas severamente comprometidas, através de estudos clínicos randomizados e relatos de casos, publicados nos últimos onze anos. Material e Métodos: A pesquisa foi conduzida nas bases de dados PubMed, Medline, Lilacs e BBO, utilizando a primeira estratégia de busca com os s 'pinos dentais' e 'longevidade' e 'pinos reforçados com fibra de vidro' ou 'pinos metálicos'. A segunda estratégia de busca consistiu na análise das referências dos artigos identificados pela primeira estratégia. Ambos os estudos foram delineados com critérios rigorosos de inclusão e exclusão. Resultados: Não se constataram diferenças estatisticamente significativas e clinicamente relevantes na longevidade entre pinos metálicos e de fibra de vidro. Conclusão: O êxito clínico e a durabilidade do procedimento restaurador empregando pinos intrarradiculares dependem primordialmente da quantidade de remanescente ao redor do pino (férula), do tipo e posição do dente na arcada (o que impacta nas forças mastigatórias exercidas sobre o dente restaurado) e da aplicação correta da técnica de cimentação.Destaca-se que o pino de fibra de vidro oferece vantagens substanciais ao apresentar módulo de elasticidade similar à estrutura dentária, assegurando uma distribuição mais homogênea das forças mastigatórias e reduzindo o risco de fraturas (AU)

Does repeated autoclave sterilization cause changes in the color and fragility of fiberglass reinforced resin crowns?

BACKGROUND: Since the effects of sterilization on the Fiberglass Reinforced Resin Crowns (FRRCs) is not well-known the aim of current study was to evaluate the effects of autoclave sterilization on the fracture resistance, color stability, and surface composition of FRRCs. METHODS: A total of 48 crowns were used. The crowns were divided into three groups according to the sterilization number: no sterilization (Control Group), one sterilization (Group 1), and four sterilizations (Group 2). The microstructure of the three crowns from each group was evaluated using scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX) spectroscopy. Thirteen FRRCs from each group were first used for color stability testing and then for the fracture resistance analysis. One-way analysis of variance (ANOVA), one-way repeated measures ANOVA, and paired t-tests were used in the statistical analysis. RESULTS: EDX results revealed that the weight% of surface silicon atoms in group 2 was significantly higher. Some crack lines could be observed on the SEM images. Statistically significant differences were found in color stability following the first and fourth sterilization cycles (p < .01). The increase in the sterilization cycle did not statistically decrease the fracture resistance of the FRRCs (p = .055); however, overall, a decreasing trend was observed in fracture resistance as the sterilization cycle increased. CONCLUSIONS: Autoclave sterilization caused some changes in the surface elemental composition and surface morphology of FRRCs. Avoiding unnecessary FRRC trials is important to reduce the number of sterilizations.

Experimental Characterization of Composite-Printed Materials for the Production of Multirotor UAV Airframe Parts.

In this paper, the characterization of 3D-printed materials that are considered in the design of multirotor unmanned aerial vehicles (UAVs) for specialized purposes was carried out. The multirotor UAV system is briefly described, primarily from the aspect of system dynamics, considering that the airframe parts connect the UAV components, including the propulsion configuration, into a functional assembly. Three additive manufacturing (AM) technologies were discussed, and a brief overview was provided of selective laser sintering (SLS), fused deposition modeling (FDM), and continuous fiber fabrication (CFF). Using hardware and related software, 12 series of specimens were produced, which were experimentally tested utilizing a quasi-static uniaxial tensile test. The results of the experimental tests are provided graphically with stress-strain diagrams. In this work, the focus is on CFF technology and the testing of materials that will be used in the production of mechanically loaded airframe parts of multirotor UAVs. The experimentally obtained values of the maximum stresses were compared for different technologies. For the considered specimens manufactured using FDM and SLS technology, the values are up to 40 MPa, while for the considered CFF materials and range of investigated specimens, it is shown that it can be at least four times higher. By increasing the proportion of fibers, these differences increase. To be able to provide a wider comparison of CFF technology and investigated materials with aluminum alloys, the following three-point flexural and Charpy impact tests were selected that fit within this framework for experimental characterization.

Fiberglass cloth coated by coffee ground waste-derived carbon quantum dots/titanium dioxide composite for removal of caffeine and other pharmaceuticals from water.

Coffee ground waste from the coffee beverage preparation is mainly discarded and consequently ends up in landfill, which cause the contamination of caffeine in various environmental compartments. This study focuses on the upcycling of coffee-ground waste to carbon quantum dots (CQDs) for use as a modifying material to improve the visible light activity of titanium dioxide (TiO2). The CQD solution was synthesized by hydrothermal method, which has an average size of 2.80 ± 0.63 nm. The CQDs/TiO2 photocatalysts were prepared by combining CQD solutions at various amounts with sol-gel TiO2 and then coated on the fiberglass cloths (FGCs). The photocatalytic application mainly focuses on the removal of caffeine from the water. The photocatalytic experiment was preliminary run in a simple batch reactor under visible light. The 5CQDs/TiO2 coated FGC (5 mL of CQD solution/g of Ti-based on sol-gel) showed the best performance, and it was selected for the removal of caffeine and other pharmaceuticals (i.e., carbamazepine and ibuprofen) in the recirculating reactor. The removals of caffeine, carbamazepine, and ibuprofen after irradiation for 9 h were 82%, 88%, and 84%, respectively. The residual concentrations were significantly lower than the reported toxicity levels based on specific species. The changes in total organic carbon were observed, indicating the mineralization of pharmaceuticals in water. The 5CQDs/TiO2 coated FGC showed good flexible performance. No obvious loss of activity was observed for five runs. The actual wastewater from the coffee pot cleaning process was also tested. The removal was 80% for caffeine and 86% for color in the unit of the American Dye Manufacturers Institute (ADMI).

Silanized fiberglass modified by carbon dots as novel and impressive adsorbent for aqueous heavy metal ion removal.

This work discusses the application of a silanized fiberglass (SFG) modified by carbon dots (CDs) as an effective adsorbent for up-taking some heavy metal ions including lead (Pb2+), chromium (Cr3+), cadmium (Cd2+), cobalt (Co2+), and nickel (Ni2+) as pollutant in the aqueous solution by batch method. Removal tests were carried out after optimization of pH, contact time, initial concentration of metal ions, and CDs amount. The SFG modified with CDs (CDs-SFG) was applied for the removal of 10 ppm of each metal ion solution after 100 min and the corresponding results showed the removal efficiencies of 100, 93.2, 91.8, 90, and 88.3% for Pb2+, Cd2+, Cr3+, Co2+, and Ni2+, respectively. The adsorption capacity of CDs-SFG in the metal ion mixed solution was also evaluated, and the results indicated the same trend in the adsorption capacity for metal ions in the mixed solution, though with lower absolute values compared to the single metal solutions. Moreover, the selectivity of this adsorbent for the adsorption of Pb2+ was almost twice of other tested metal ions. The regeneration of the CDs-SFG showed that its adsorption capacity after five cycles was reduced about 3.9, 6.0, 6.8, 6.7, and 8.0% for Pb2+, Cd2+, Cr3+, Co2+, and Ni2+, respectively. Finally, the applicability of the CDs-SFG adsorbent was examined with the analysis of the metal ions in water and wastewater samples.

Evaluation of the push-out bond strength of an adjustable fiberglass post system to an endodontically treated oval root canal.

To evaluate the push-out bond strength of the adjustable fiberglass post system to dentin. Twenty maxillary canine roots were endodontically treated and divided into two groups (n=10): conventional fiberglass posts (CFPs) and with single adjustable post (SAP) system. Two slices of each third were subjected to the push-out and failure pattern test and the most apical slice was subjected to analysis of the adhesive interface by scanning electron microscopy (SEM). Data were analyzed by the three-way analysis of variance, Tukey, and Friedman tests, and linear regression (α=0.05). The results showed higher push-out bond strength in the initial time interval for SAP (10.3±5.3, p<0.01). After 6 months, there was reduction in push-out bond strength for both (p<0.001). A higher percentage of adhesive and cohesive failures to dentin. After 6 months areas of maladaptation were noted (p=0.000). The SAP is completed to the promissory root canal in relation to alternative CFP.

Stronger than Ever: Multifilament Fiberglass Posts Boost Maxillary Premolar Fracture Resistance.

This paper investigates the influence of cavity configuration and post-endodontic restoration on the fracture resistance, failure mode and stress distribution of premolars by using a method of fracture failure test and finite elements analysis (FEA) coupled to Weibull analysis (WA). One hundred premolars were divided into one control group (Gcontr) (n = 10) and three experimental groups, according to the post-endodontic restoration (n = 30), G1, restored using composite, G2, restored using single fiber post and G3, restored using multifilament fiberglass posts (m-FGP) without post-space preparation. Each experimental group was divided into three subgroups according to the type of coronal cavity configuration (n = 10): G1O, G2O, and G3O with occlusal (O) cavity configuration; G1MO, G2MO, and G3MO with mesio-occlusal (MO); and G1MOD, G2MOD, and G3MOD with mesio-occluso-distal (MOD). After thermomechanical aging, all the specimens were tested under compression load, and failure mode was determined. FEA and WA supplemented destructive tests. Data were statistically analyzed. Irrespective of residual tooth substance, G1 and G2 exhibited lower fracture resistance than Gcontr (p < 0.05), whereas G3 showed no difference compared to Gcontr (p > 0.05). Regarding the type of restoration, no difference was highlighted between G1O and G2O, G1MO and G2MO, or G1MOD and G2MOD (p > 0.05), whereas G3O, G3MO, and G3MOD exhibit higher fracture resistance (p < 0.05) than G1O and G2O, G1MO and G2MO, and G1MOD and G2MOD, respectively. Regarding cavity configuration: in G1 and G2, G1O and G2O exhibited higher fracture resistance than G1MOD and G2MOD, respectively (p < 0.05). In G3, there was no difference among G3O, G3MO and G3MOD (p > 0.05). No difference was found among the different groups and subgroups regarding the failure mode. After aging, premolars restored with multifilament fiberglass posts demonstrated fracture resistance values comparable to those of an intact tooth, irrespective of the different type of cavity configuration.

Reabilitação estética e funcional com resina composta após trauma dentário: relato de caso / Aesthetic and functional rehabilitation with composite resin after dental trauma: case report

As lesões dentárias traumáticas são um problema de saúde pública mundial, dentre as quais a fratura dentária é a de maior ocorrência, envolvendo principalmente os dentes anteriores. A abordagem de grandes fraturas anteriores é um desafio para cirurgiões dentistas de qualquer nível pois, além da função, afetam diretamente a estética do paciente, fazendo-se necessário um planejamento que envolva diferentes especialidades na odontologia. Objetivo: Relatar um caso clínico de reabilitação funcional e estética de fratura dentária nos incisivos centrais superiores envolvendo tratamento endodôntico, instalação de pino de fibra de vidro e restauração direta em resina composta. Relato de Caso: O paciente de 17 anos sofreu fratura nos incisivos centrais superiores causada por uma queda de bicicleta. Devido à busca tardia por tratamento o elemento 21 foi diagnosticado com necrose pulpar e, portanto, foi submetido à tratamento endodôntico pela Técnica Crown Down e reabilitação com pino de fibra de vidro Splendor-SAP. Posteriormente, os elementos 11 e 21 foram restaurados com facetas diretas em resina composta pela técnica incremental. Conclusão: A reabilitação com instalação de pino de fibra de vidro associada à técnica de estratificação incremental em resina composta se mostra como uma boa opção para reabilitação estética pois permite dar forma anatômica ao dente com riqueza de detalhes na estratificação da dentina e esmalte, além de máxima preservação da estrutura dental. Os resultados obtidos reforçam o sucesso estético e funcional com significativo impacto na qualidade de vida do paciente(AU)

Traumatic dental injuries are a worldwide public health problem, among which dental fractures are the most frequent, mainly involving the anterior teeth. The approach of large anterior fractures is a challenge for dental surgeons of any level because, in addition to function, they directly affect the patient's esthetics, requiring a plan that involves different specialties in dentistry. Objective: Report a clinical case of functional and aesthetic rehabilitation of dental fractures in maxillary central incisors involving endodontic treatment, installation of a fiberglass post and direct restoration in composite resin. Case Report: The 17-year-old patient suffered a fracture in the upper central incisors caused by a fall from a bicycle. Due to the late search for treatment, element 21 was diagnosed with pulp necrosis and, therefore, underwent endodontic treatment using the Crown Down Technique and rehabilitation with a Splendor-SAP fiberglass pin. Later, elements 11 and 21 were restored with direct veneers in composite resin using the incremental technique. Conclusion: Rehabilitation with the installation of a fiberglass post associated with the incremental layering technique in composite resin is a good option for aesthetic rehabilitation as it allows the anatomical shape of the tooth with rich details in the layering of dentin and enamel, in addition to maximum preservation of the tooth structure. The results obtained reinforce the aesthetic and functional success with a significant impact on the patient's quality of life(AU)

Recycling of Epoxy/Fiberglass Composite Using Supercritical Ethanol with (2,3,5-Triphenyltetrazolium)2[CuCl4] Complex.

The widespread use of polymer composite materials (PCM) leads to an increase in non-recyclable waste. This paper discusses the feasibility of recycling fiberglass with an epoxy matrix by solvolysis in ethanol under supercritical conditions. The solvolysis process completes successfully within four hours in an environment of a pure solvent containing 10% water at a temperature of 280 °C when the solvent passes into the supercritical state. The treatment time increases up to 10 h at a process temperature of 250 °C. When using a coordination compound of copper(II) chloride with organic chloride salt having 2,3,5-triphenyltetrazolium as the counterion, having the composition of (2,3,5-triphenyltetrazolium)2[CuCl4], the treatment time is reduced. The addition of the complex of 5% by weight makes it possible to completely remove the epoxy matrix at a temperature of 250 °C for two hours. The products separated from the solvolysis liquid were studied by infrared spectroscopy. The resulting fibers were examined by thermogravimetric analysis and scanning electron microscopy. The residual strength of the recovered fibers is 98%. Thus, the resulting fibers can be reused in the composite industry. Including both for the production of decorative products and for the production of structural products made of polymer composite materials.

Revolution in orthopedic immobilization materials: A comprehensive review.

Immobilization material has slowly revolutionized since 3000 BCE from traditional plaster to modern day synthetic casting tape, including other sustainable immobilization material. This revolution is driven by the search for superior casting material that possesses excellent mechanical and load-bearing properties, non-toxicity, excellent healing rates, patient satisfaction and eco friendliness. Even though the new materials have been evolved, the traditional plaster still remains a material of choice owing to its excellent skin conformability, low cost and availability. This paper aims to present a comprehensive review on the technique of immobilization, existing orthopedic immobilization (casting and splinting) materials and complications associated with immobilization (mainly casting) which aimed to assist the medical practitioners and researchers in casting material improvements and selection. Nine immobilization materials are comprehensively discussed for their desirable properties, drawbacks and the required improvements to the composition, along with the most common cast complications ranging from superficial pressure sores to compartment syndrome and Deep Vein Thrombosis. . This paper identifies that among the existing material, plaster casts are still highly used due to their cost benefit and the ability to fit patients into full body casts, while synthetic material is too rigid and has a higher probability of causing complications such as compartment syndrome and deep vein thrombosis. Patients show a higher preference in using synthetic casts for short term and body extremity casting as they are comparatively more comfortable. New materials such as Woodcast shows good promise but their mechanical characteristics and comfort are yet to be critically analyzed. However, there exists an imminent requirement to upgrade existing material as well as to introduce novel promising sustainable material for long term immobilization.

The use of serial casting in the treatment of children with cerebral palsy: a study protocol

Introduction: Cerebral Palsy (CP) is characterized by a disorder of posture and movement, commonly leading to disabling orthopedic alterations, including muscle shortening, especially in the lower limbs. Stretching methods, performed gradually, are necessary to delay the impairment in function from muscle shortening. The use of serial casting aims to promote proper alignment, and an ideal and stable support base, in addition to better bone and joint health, leading to better posture, mobility, muscle function, and, subsequently, increased fitness and health.Objective: evaluate range of motion, postural control, and motor performance in children with CP, using serial casting, as well as to measure its effect on fitness through the autonomic nervous system (ANS).Methods: Sixty children and adolescents with CP, of both sexes, 3 to 12 years of age, will be divided into three groups: Groups A, B, and C, with 20 individuals each. Group A will use serial casting, Group B will use the orthosis continuously (with removal only allowed for bathing), and Group C will use the orthosis in their daily routine. Range of motion of the ankle of first and second resistance levels (R1 and R2), gross motor function measure (GMFM), and balance (measured by BERG scale) will be used in the initial and final assessments, and after 6 months and one year of follow-up. Timed-up-and-go (TUG), load distribution (baropodometry), motor performance measured through a real basketball game and the virtual MoveHero game, analysis of body angulation with "mydartfish", and cardiac autonomic modulation through heart rate variability will be assessed in three different situations: barefoot, with orthosis, and with casting.Conclusion: Serial casting demonstrates the potential to produce positive results in the treatment of individuals with CP regarding better alignment, with consequent motor and autonomic improvement.

Biomechanical performance of three fiberglass post cementation techniques: Imaging, in vitro, and in silico analysis.

PURPOSE: The structural integrity of the resin cement layer, the bond strength, and the biomechanical behavior of different fiberglass post cementation techniques were evaluated. METHODS: Thirty-three bovine incisors were divided into three groups (n = 11): conventional fiberglass post (CFP), conventional fiberglass post in flared root canals (CFL), and relined fiberglass post (RFP). Six specimens from each group were submitted for high-resolution microcomputed tomography (µCT) to evaluate the integrity and presence/volume of voids at the resin cement layer. Finite element analysis (FEA) of two three-dimensional (3D) models of each group were conducted, one considered ideal (without interface defects) and another containing the conditions identified in the µCT analysis. Push-out bond strength tests were conducted for all specimens. RESULTS: The CFL group had the greatest mean values of void (Thirds cervical: 73.67; middle: 95.67; apical: 47.33) and gap concentration (Thirds cervical: 14.67; middle: 15.83; apical: 8.33) compared with CFP and RFP. A significant difference in bond strength was observed between the cervical (1.33 MPa) and middle thirds (1.85 MPa) compared with the apical third (4.85 MPa) of the CFL. A significant difference was observed in the bond strength in the CFL (1.33 MPa) and RFP (3.29 MPa) in the cervical third, which were statistically similar to the bond strength of the CFP. The tensile stress distributions were similar in most structures, localized in the cervical region on the lingual surface. CONCLUSIONS: Structural defects in the interface layer might influence the bond strength and biomechanical behavior under the different fiberglass post cementations.

Avaliação da resistência à fratura de dentes com fragilização simulada utilizando sistema de pinos de fibra de vidro / Fracture resistance evaluation of teeth with simulated embrittlement using fiberglass post system

O objetivo deste trabalho foi avaliar, ex vivo, pelo teste de compressão e ciclagem, a resistência a fratura de dentes que tiveram suas raízes fragilizadas em laboratório que receberam reforço intrarradicular com um modelo de pino de fibra de vidro Splendor-SAP em comparação ao pino de fibra de vidro Exacto. Além disso, foi realizada análise por elementos finitos para identificar os pontos de maior estresse estrutural. Foram utilizadas 60 raízes de dentes bovinos, os espécimes foram seccionados e padronizados com 16 mm de comprimento. Os canais foram instrumentados em toda a sua extensão utilizando limas endodônticas manuais. As amostras foram aleatoriamente distribuídas em seis grupos acordo com a espessura do remanescente radicular medidos a partir do terço cervical (2 mm e 3 mm) e o reforço radicular a ser utilizado (n=10): G1 - Controle 1, com remanescente radicular de 2 mm e sem reforço intrarradicular; G2 - Controle 2, com remanescente radicular de 3 mm e sem reforço intrarradicular; G3 - Com remanescente de 2 mm e reforço intrarradicular utilizando pino Exacto; G4 - Com remanescente radicular de 3 mm e reforço intrarradicular utilizando Exacto; G5 - Com remanescente radicular de 2 mm e reforço intrarradicular utilizando Splendor-SAP; G6 - Com remanescente radicular de 3 mm e reforço intrarradicular utilizando Splendor-SAP. Para a fragilização simulada, o desgaste radicular foi de 12 mm no interior do canal. Em seguida, os canais foram obturados e o material obturador removido dos terços cervical e médio, restando apenas 4 mm de material no terço apical. A cimentação dos pinos foi realizada seguindo o protocolo do fabricante. O teste de fadiga foi realizado por ciclagem mecânica dos espécimes para o envelhecimento das mesmas (1200000 ciclos; 3.8 Hz; carga = 88 N). Foi realizado o teste de compressão pela máquina de Ensaios Universais, com célula de carga de 100 Kg à velocidade de 1 mm/min com incidência a 45°. Os valores médios de resistência à fratura encontrados para os grupos, em ordem crescente, foram: G1 - 9,045 kgf, G2 - 9,753 kgf, G3 - 68,411 kgf, G4 - 80,167 kgf, G5 - 70,551 e G6 - 80,027. Os espécimes foram analisados em estereomicroscópio para classificação do modo de falha. Os resultados obtidos foram submetidos à análise estatística (ANOVA e Tukey) que demonstrou diferença estatisticamente significativa (p<0,05) (AU)

The objective of this work was to evaluate, ex vivo, by compression and cycling test, the resistance to fracture of teeth that had their roots weakened in the laboratory and that received intraradicular reinforcement with a Splendor-SAP fiberglass post model in comparison to the Exact fiberglass pin. In addition, finite element analysis was performed to identify the points of greatest structural stress. Sixty roots of bovine teeth were used, the specimens were sectioned and standardized with 16mm in length. The canals were instrumented along their entire length using manual endodontic files. The samples were randomly distributed into six groups according to the thickness of the root remnant (2 mm and 3 mm) and the root reinforcement to be used (n=10): G1 - Control 1, with a 2 mm root remnant and without intraradicular reinforcement ; G2 - Control 2, with root remnant of 3 mm and without intraradicular reinforcement; G3 - With a 2 mm remnant and intraradicular reinforcement using an Exacto post; G4 - With root remnant of 3 mm and intraradicular reinforcement using Exacto; G5 - With root remnant of 2 mm and intraradicular reinforcement using Splendor-SAP; G6 - With root remnant of 3 mm and intraradicular reinforcement using Splendor-SAP. For simulated embrittlement, root wear was 12 mm inside the canal. Then, the specimens were obturated and had the obturator material removed from the cervical and middle thirds, leaving only 4 mm of material in the apical third. The cementation of the posts was performed following the manufacturer's protocol. The fatigue test was carried out by mechanical cycling of the specimens for their aging (1200000 cycles; 3.8 Hz; load = 88 N). The compression test was carried out using the Universal Testing machine, with a load of 100 kg at a speed of 1 mm/min with an incidence of 45°. The average fracture resistance values found for the groups, in ascending order, were: G1 - 9,045 kgf, G2 - 9,753 kgf, G3 - 68,411 kgf, G4 - 80,167 kgf, G5 - 70,551 e G6 - 80,027. The specimens were analyzed under a stereomicroscope to classify the failure mode. The results obtained were submitted to statistical analysis (ANOVA and Tukey) which showed a statistically significant difference (p <0.05). (AU)