Comparative Evaluation of Microleakage of Fiber-reinforced Glass Ionomer Cement and Conventional Glass Ionomer Cement Restorations Immersed in Three Different Beverages: In Vitro Study.

AIM: The aim of the study was to compare and evaluate the microleakage of fiber-reinforced glass ionomer cement (GIC) and conventional glass ionomer cement restorations immersed in three different beverages. MATERIALS AND METHODS: A total of 96 human exfoliating deciduous molars were selected which were cleaned and disinfected. Standardized Class V cavity preparations were done and buccal surface were restored with experimental fiber-reinforced glass ionomer cement (Exp-FRGIC), lingual surface were restored with Type II conventional GIC. They were divided into four groups according to the test beverage. The samples were subjected to various immersion regimes and evaluated for microleakage under stereomicroscope. RESULTS: Intragroup comparison for (Exp-FRGIC) showed significant microleakage when immersed in fresh fruit juice at high immersion whereas intragroup comparison in conventional GIC, showed highest microleakage with soft drink. Intergroup comparison of (Exp-FRGIC) in high immersion regime, showed more microleakage with specimen immersed in soft drink followed by fresh fruit juice. CONCLUSION: It can thus be concluded that the three beverages used in the study affected the microleakage of both restorative materials significantly. CLINICAL SIGNIFICANCE: Increasing usage of fruit juices in the pediatric diet has a definite impact on the progression of caries and it directly or indirectly affects the quality of restorations placed in the oral cavity. How to cite this article: George MA, Chandak SA, Khekade SH, et al. Comparative Evaluation of Microleakage of Fiber-reinforced Glass Ionomer Cement and Conventional Glass Ionomer Cement Restorations Immersed in Three Different Beverages: In Vitro Study. J Contemp Dent Pract 2024;25(4):346-353.

Antibacterial and preventive effects of newly developed modified nano-chitosan/glass-ionomer restoration on simulated initial enamel caries lesions: An in vitro study.

BACKGROUND: Despite the superiority of glass-ionomer cements (GICs) over composites in treating white spot lesions (WSLs), there is still a concern about their preventive and antibacterial properties. Efforts have been made to improve the strength of their bond to demineralized enamel, fluoride release and antibacterial properties by adding nanoparticles of chitosan, which seems to be a promising method. OBJECTIVES: The aim of the present study was to assess the antibacterial effect, the microshear bond strength (µSBS) to enamel at the WSL area, and the fluoride and nano-chitosan release after modifying the polyacrylic acid liquid phase of a traditional GIC with different nano-chitosan volumes. MATERIAL AND METHODS: A total of 120 samples were prepared, and then divided into 4 groups (n = 30): G1 - non-modified GIC, which served as a control group, while G2, G3 and G4 were modified with different nano-chitosan volumes (50%, 100% and 150%, respectively). Microshear bond strength was assessed using a universal testing machine (UTM) after storage in distilled water for 24 h. Fluoride and nanochitosan release was measured with the use of spectrophotometers at different time points (initially, and at 1 h, 24 h, 48 h, 72 h, 1 week, 2 weeks, 3 weeks, and 6 weeks) after storage in distilled water. The antibacterial effect against the Streptococcus aureus strain was assessed with the agar diffusion test. The data was statistically analyzed. RESULTS: After 24-hour storage, G2 recorded a slight, yet non-significant, increase in the µSBS values (4.1 ±0.94 MPa) as compared to G1 (3.9 ±1.30 MPa). With regard to fluoride release, the amount recorded for G1 was significantly greater at the end of the 24-hour storage period (0.70 ±0.30 µmf/cm2) than modified nano-chitosan GIC groups; G1 was followed by G4 (0.54 ±0.34 µmf/cm2). The highest amount of nano-chitosan release after 24-hour storage was noted for G3 (0.85 ±0.00 µmf/cm2). The highest inhibition zone value was recorded for G2. CONCLUSIONS: Glass-ionomer cement modified with 50% nano-chitosan was shown to positively affect µSBS and the antibacterial effect, while modification with 150% nano-chitosan significantly increased fluoride release.

Antimicrobial effects of surface pre-reacted glass-ionomer (S-PRG) eluate against oral microcosm biofilm.

This study investigated the antimicrobial activity of surface pre-reacted glass ionomer eluate (S-PRG) against oral microcosm biofilms collected from the oral cavity of patients. Dental biofilm samples were collected from three volunteers to form microcosm biofilms in vitro. Initially, screening tests were carried out to determine the biofilm treatment conditions with S-PRG eluate. The effects of a daily treatment for 5 min using three microcosm biofilms from different patients was then evaluated. For this, biofilms were formed on tooth enamel specimens for 120 h. Biofilms treated with 100% S-PRG for 5 min per day for 5 days showed a reduction in the number of total microorganisms, streptococci and mutans streptococci. SEM images confirmed a reduction in the biofilm after treatment. Furthermore, S-PRG also reduced lactic acid production. It was concluded that S-PRG eluate reduced the microbial load and lactic acid production in oral microcosm biofilms, reinforcing its promising use as a mouthwash agent.

Açaí juice stains a glazed resin-modified glass-ionomer cement.

Coloured compounds (anthocyanins) in açaí can stain resin-modified glass-ionomer cement (RMGIC) due to its low staining resistance. AIM: The aim of this study was to assess whether açaí compromises the surface colour and roughness of RMGIC in vitro. MATERIALS AND METHOD: Disc-shaped specimens (2 mm thick, 8 mm in diameter) of Vitremer™ (3M ESPE, St Paul, MN, USA) were prepared according to the manufacturer 's instructions. The mixture was inserted into a silicone mouldplaced between two mylar strips, and light cured. Specimens were randomly divided into three groups (n=25) according to the solutions to be used for chemical degradation: artificial saliva (control), açaí sorbet and açaí juice. A spectrophotometer CM-2600d/2500d (Konica Minolta, Tokyo, Japan) was used to analyse the colour (CIELa*b* scale). Surface roughness (Ra, mm) was measuredusing theprofilometer Surfcorder SE 1700 (Kosaka Corp, Tokyo, Japan). The specimens were subjected to three daily soaks (6 ml, 15 minutes) for 14 days at 37°C. They were washed in distilled water and placed in fresh saliva (30 minutes in the interval). After the third soak in a day, they were stored in fresh saliva overnight. Outcomes were analysed at baseline (L*, a*, b*, Ra) and after degradation (L'*, a'*, b'*, Ra'). RESULTS: The pH values of saliva, sorbet, and juice were 7.0, 3.8, and 4.9, respectively. ΔE* values were 6.6 for saliva, 6.9 for sorbet and 7.8 for juice. There was a significant ΔE* difference between saliva (p=0.005) and juice (p=0.002), and between juice and sorbet (p=0.019), but none between saliva and sorbet (p=0.401). There was no significant Δb* difference between the solutions. No difference between juice and sorbet was observed for Δa*, but they were significantly different from saliva (p<0.001). Brightness (L*) changed significantly. Juice showed the highest ΔE* (7.8) and ΔL* (7.7). No significant change was observed for roughness and there was no difference between the solutions for ARa. CONCLUSIONS: Açaí and saliva led to unacceptable staining, but no significant roughness changes in the resin-modified glass-ionomer cement.

As antocianinas presentes no açaí podem manchar o cimento de ionomero de vidro modificado por resina (CIVMR) devido a baixa resistencia ao manchamento do material. OBJETIVO: O objetivo desse estudo foi avaliar se o açaí compromete a cor e a rugosidade de superficie de um CIVMR in vitro. MATERIAIS E MÉTODOS: Amostras (2 mm de espessura, 8 mm de diámetro) de Vitremer™ (3M ESPE, St Paul, MN, USA) foram preparadas de acordo com as instrugoes do fabricante. O materialfoi espatulado, inserido em um molde de silicone colocado entre duas tiras de poliestireno e fotopolimerizado. Após, as amostras foram randomizadas e alocadas em tres grupos (n=25) de acordo com as solugoes usadas para a degradagao química: saliva artificial (controle) e sorbet de açaí e suco de açaí. Utilizou-se o espectrofotometro CM-2600d/2500d (Konica Minolta, Tokyo, Japan) para a análise da cor (escala CIELa*b*) e o rugosímetro Surfcorder SE 1700 (Kosaka Corp, Tokyo, Japan) para a rugosidade de superficie (Ra, mm). As amostras foram submetidas a tres imersoes diárias (6 ml, 15 minutos) em cada solugao por 14 dias a 37°C, tendo sido lavadas em água destilada e mantidas em saliva fresca (30 minutos) nos intervalos. Após a terceira imersao no dia, as amostras foram mantidas em saliva renovada até o dia seguinte. As variáveis foram analisadas antes (L*, a*, b*, Ra) e depois da degradagao química (L'*, a'*, b'*, Ra'). RESULTADOS: Os valores de pH da saliva, sorbet e suco foram, respectivamente 7,0, 3,8 e 4,9. Houve diferenga significante para ΔE* entre saliva (p=0.005) e suco (p=0.002) e entre suco e sorbet (p=0.019), mas nao entre saliva e sorbet (p=0.401). Nao foi observada diferenga significante para Δb* entre as solugoes. Nao houve diferenga significante para Δa* entre suco e sorbet, mas eles foram significativamente diferentes da saliva (p<0.001). A luminosidade (L*) mostrou alteragao significante. O suco mostrou os maiores valores de ΔE* (7,8) e ΔL* (7,7)". Nao houve mudanga significante para a rugosidade e nao foi observada diferenga significante entre as solugoes para ARa (p>0.05). CONCLUSÃO: O açaí e a saliva causaram manchamento inaceitável do glaze do CIVMR e insignificante alteragao da rugosidade.

Color change of tooth-colored restorative materials bonded to silver diamine fluoride-treated dentine: a systematic review.

BACKGROUND: The desirable properties of silver diamine fluoride (SDF) make it an effective agent for managing dental caries and tooth hypersensitivity. There are several clinical instances that SDF application might precede the placement of direct tooth-colored restorations. On the other hand, SDF stains demineralized/carious dental tissues black, which might affect the esthetic outcomes of such restorations. Color is a key parameter of esthetics in dentistry. Therefore, this study aims to systematically review dental literature on color/color change of tooth-colored restorations placed following the application of SDF on dentine. METHODS: Comprehensive search of PubMed, Embase, Scopus and ISI Web of Science databases (until August 2023) as well as reference lists of retrieved studies was performed. In vitro studies reported color or color change of tooth-colored restorative materials applied on SDF-treated dentine were included. Methodological quality assessment was performed using RoBDEMAT tool. Pooled weighted mean difference (WMD) and 95% confidence interval (95% CI) was calculated. RESULTS: Eleven studies/reports with a total of 394 tooth-colored restorations placed following a) no SDF (control) or b) SDF with/without potassium iodide (KI)/glutathione dentine pre-treatments were included. Color change was quantified using ∆E formulas in most reports. The pooled findings for the comparison of resin-based composite (RBC) restorations with and without prior 38% SDF + KI application revealed no statistically significant differences in ∆E values at short- and long-term evaluations (~ 14 days: WMD: -0.56, 95% CI: -2.09 to 0.96; I2: 89.6%, and ~ 60 days: WMD: 0.11; 95% CI: -1.51 to 1.72; I2: 76.9%). No studies provided sufficient information for all the items in the risk of bias tool (moderate to low quality). CONCLUSIONS: The limited evidence suggested comparable color changes of RBC restorations with and without 38% SDF + KI pre-treatment up to 60 days. The included studies lacked uniformity in methodology and reported outcomes. Further studies are imperative to draw more definite conclusions. PROTOCOL REGISTRATION: The protocol of this systematic review was registered in PROSPERO database under number CRD42023485083.

Effects of novel additives on the mechanical and Biological properties of glass ionomer cement: An in vitro study.

Aim: To evaluate the efficacy of incorporated novel additives in Glass Ionomer Cement to ameliorate biocompatibility and mechanical properties. Introduction: Though Glass Ionomer Cement (GIC) has multiple advantages, it is not strong enough for medical applications, and its biocompatibility is questionable. To improve biocompatibility and its mechanical properties, a study was performed to investigate the potential benefits of adding graphene, carbon nanotubes, hydroxyapatite, and bioactive glass to GIC. The objective was to enhance both the mechanical properties and biocompatibility of GIC. Material and Method: Modified Glass Ionomer Cement was prepared by creating five groups. Hydroxyapatite, multi-walled carbon nanotubes, graphene, and bioactive glass were incorporated in a 10:1 weight ratio, respectively. Group 5 was designated as the control group and used Fuji Type II GIC. After preparing 90 samples, they were kept in deionized water for a day and then evaluated their compressive strength, microhardness, and diametral tensile strength, and also checked their in vitro cytotoxicity by direct contact with L929 mammalian fibroblast cells. Statistical Analysis: The data were examined using mean and standard deviation descriptive statistics. The comparative evaluation was done via Tukey HSD test and one-way ANOVA using S.P.S.S. software. Result: It showed that Group 3 had better results in compressive strength (144.478+- 3.989), diametral tensile strength (20.29+- 0.8601), and microhardness (131+-3.536) when compared with other groups while in the biocompatibility (viability %) Group 1 [82.55], Group 3 [76.49], Group 4 [87.63], while Group 2[58.02]. Conclusion: Group 3 has better physical properties in microhardness, diametral tensile strength, and compressive strength, than the other groups. In Biocompatibility, Group 1, Group 3, Group 4, and Group 5 were noncytotoxic at the same time multi-walled carbon nanotubes group (Group 2) had cytotoxic potential.

Silver modified atraumatic restorative treatment: a paradigm shift in dental caries management.

Silver diamine fluoride (SDF) and atraumatic restorative treatment (ART) are treatment modalities that are minimally invasive and used for the prevention and control of dental caries. The amalgamation of these two techniques has led to the development of silver modified atraumatic restorative treatment (SMART). In this approach the carious lesion is restored with glass-ionomer cement (GIC) after SDF application. SMART effectively arrests caries without removing additional tooth structure, making it a promising option for caries management in children who lack cooperative ability.This article reviews the literature on SMART, the evidence regarding its applications in dental practice, its advantages, drawbacks, the scope for research, and clinical use.

Clinical Effectiveness of Ion-Releasing Restorations versus Composite Restorations in Dental Restorations: Systematic Review and Meta-Analysis.

BACKGROUND: To compare the clinical effectiveness of ion-releasing restorations (IRR) vs. composite resin (CR) in dental restorations. METHODS: A systematic search was carried out from articles published until January 2024, in the biomedical databases: PubMed, Cochrane Library, Scielo, Scopus, Web of Science and Google Scholar. Randomized clinical trials were included, with a follow-up time greater than or equal to 1 year, without time and language limits and which reported the clinical effect of IRR compared to CR in dental restorations. The RoB 2.0 tool was used to assess the risk of bias of the included studies and the GRADEPro GDT tool was used to assess the quality of evidence and the strength of recommendation of the results. RESULTS: The search yielded a total of 1109 articles. After excluding those that did not meet the selection criteria, 29 articles remained for the quantitative synthesis. The analysis found no statistically significant difference when comparing the dental restorations with IRRs or CRs. CONCLUSION: The literature reviewed suggests that there are no differences between the IRRs and CRs in dental restorations.

The Use of Potassium Iodide in Pediatric Dentistry Does Not Change the Retention of Glass Ionomer Cement on a Dentin Treated with Silver Fluoride: In Vitro Results.

In pediatric and operative dentistry, caries treatment benefits from a therapeutic option based on the use of silver fluoride (AgF) associated with potassium iodide (KI) to avoid dark colorations on dental tissues. The objective of this in vitro study is to evaluate the retention of glass ionomer cement (GIC) on a dentin when treated with AgF and KI. Twenty-two healthy human permanent molars and eight human primary teeth, all free of any decay, were cut to obtain occlusal flat dentinal surfaces and were then treated with AgF for a duration of 60 s. For half of the teeth, a drop of KI was applied for a duration of 30 s. All samples were covered with a plot of GIC and their resistance to shear bond strength was measured. The fracture resistance in both permanent and primary teeth does not show any statistically significant differences whether KI was applied or not. For permanent teeth, the resistance is slightly higher in the group treated with KI than in the group treated with AgF alone. To our knowledge, these data are the first to describe the possible application of KI both on primary and permanent teeth. In any case, further studies are needed to investigate the bond strength between dentin and GIC on a wider range of samples.

Effect of Zeolite Incorporation on the Ion Release Properties of Silver-Reinforced Glass Ionomer Cement.

BACKGROUND: Zeolite can release antimicrobial silver ions in a targeted and controlled manner for an extended time, selectively inhibiting the growth of pathogenic oral bacteria when added to dental materials. The objective of this study was to investigate the effect of the addition of zeolite to silver-reinforced glass ionomer cement on the release of silver ions over time. METHODS: Five concentrations of silver-zeolite (0%, 0.5%, 1%, 2%, 4% wt) were incorporated into silver-reinforced GIC in the form of 10 mm × 2 mm circular disks (n = 5). The disks were incubated in deionized water at 37 °C and ion release from the samples was measured at 1, 2, 7, and 30 days after immersion by inductively coupled atomic emission spectroscopy. RESULTS: Incorporating silver-zeolite increased silver ion release from silver-reinforced GIC disks compared to the control disks (p < 0.05), while incorporating zeolite alone had no effect. Higher concentrations of added silver-zeolite resulted in increased silver ion release. Sustained silver ion release was observed for up to 30 days. CONCLUSION: Adding silver-zeolite to silver-reinforced GIC may enhance its extended antibacterial effect in the oral cavity.

2-year survival and cost analysis of occlusoproximal ART restorations using encapsulated glass ionomer cement in primary molars: a randomized controlled trial.

BACKGROUND: The survival of ART restorations can be influenced by the choice of the restorative material. The aim of this randomized non-inferiority controlled trial was to compare the 2-year survival rate and cost analysis of two encapsulated glass ionomer cements (GIC) as occlusoproximal restorative materials in primary molars. METHODS: Children from public schools in Tietê (Brazil), aged 4-8 years with occlusoproximal dentine carious lesions in primary molars were selected and randomly assigned to receive either Equia Forte (EF) or Riva Self Cure (RSC) as restorative materials. Treatment was carried out by two trained final-year dental students in schools following ART premises. Restorations were assessed by a trained and calibrated examiner after 2, 6, 12, 18, and 24 months. The primary outcome was restoration survival after 2 years, analyzed using Kaplan-Meier survival and Cox regression analysis (α = 5%). Professional and materials costs for each group were collected in Brazilian Reais (R$) and converted into US dollars (US$) and analyzed using Monte-Carlo simulation. RESULTS: A total of 152 children (76 per group) were included in the study, and 121 (79%) were evaluated after 2 years. The overall 2-year restoration survival rate was 39% (EF = 45%; RSC = 32%) with no difference between the groups. The baseline and 2-year total cost of restorations using RSC was lower when compared to EF (incremental cost: US$ 6.18). CONCLUSION: After two years of follow-up, Riva Self Cure shows comparable restoration survival rates to Equia Forte, being more cost-effective in the Brazilian perspective. TRIAL REGISTRATION: This randomized clinical trial was registered on ClinicalTrials.Gov - NCT02730000.

Comparison of remineralization ability of tricalcium silicate and of glass ionomer cement on residual dentin: an in vitro study.

OBJECTIVE: This study aimed to compare the remineralization effects of a calcium silicate-based cement (Biodentine) and of a glass ionomer cement (GIC: Fuji IX) on artificially demineralized dentin. METHODS: Four standard cavities were prepared in dentin discs prepared from 34 extracted sound human third molars. In each disc, one cavity was covered with an acid-resistant varnish before demineralization (Group 1). The specimens were soaked in a chemical demineralization solution for 96 h to induce artificial carious lesions. Thereafter, one cavity each was filled with Biodentine (Group 2) and GIC (Group 3), respectively, and one carious lesion was left unrestored as a negative control (Group 4). Next, specimens were immersed in simulated body fluid (SBF) for 21 days. After cross-sectioning the specimens, the Ca/P ratio was calculated in each specimen by using scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX). Finally, data were analyzed using repeated-measures ANOVA with post-hoc Bonferroni correction. RESULTS: Both cement types induced dentin remineralization as compared to Group 4. The Ca/P ratio was significantly higher in Group 2 than in Group 3 (p < 0.05). CONCLUSION: The dentin lesion remineralization capability of Biodentine is higher than that of GIC, suggesting the usefulness of the former as a bioactive dentin replacement material. CLINICAL RELEVANCE: Biodentine has a higher remineralization ability than that of GIC for carious dentin, and its interfacial properties make it a promising bioactive dentin restorative material.

Evaluation of Vertical Discrepancies in Crown Seating Using Different Glass Ionomer Cement Volume: An In Vitro Study.

Background This in vitro study aimed to assess the vertical disparities in the positioning of complete crown castings when different quantities of cement were used and to determine the optimal amount of cement for cementation while minimizing any marginal discrepancies. Methodology A total of 60 ideal nickel-chromium (Ni-Cr) crown castings were divided into three groups of experimental volumes of glass ionomer cement, with 20 castings in each group. Group I had completely filled volume with cement, group II had it half-filled, and group III had brushed up cement internally. The crowns were cemented by applying a static load of 5 kg to the cementation apparatus for 10 minutes. The marginal discrepancy between the die and the castings was measured pre-cementation and post-cementation using image analysis software in combination with a stereomicroscope (Motic, USA) at predetermined points that were marked on the die. Statistical analysis was performed using Statistical Package for the Social Sciences (IBM SPSS Statistics for Windows, IBM Corp., Version 16, Armonk, USA) software. A one-way analysis of variance (ANOVA) was used for the intergroup analysis. A paired sample t-test was used for intragroup analysis. Result  Brushing cement onto the internal surface presented the least mean values (P<0.05) of post-pre-cementation vertical discrepancy (14.92±10.77 µm) when compared to the half-filled cement group (28.42±12.45 µm) and the fully-filled cement group (58.50±20.91 µm). Conclusion Cement volume appeared to be a key factor in the vertical marginal discrepancy of the crown. The cement brush applied to the internal surfaces of the crown showed smaller post-cementation vertical discrepancies.

Tensile strength of conventional glass ionomer cement and silver reinforced glass ionomer cement.

A comparative analysis and assessment of the compressive strength (CS) and diametral tensile strength (DTS) between conventional glass ionomer cement (C-GIC) and a silver-reinforced GIC (S-GIC) variant is of interest. Ten specimens of both C-GIC (GC Fuji II, Japan) and S-GIC (Riva Silver, SDI, Australia) were fabricated for the evaluation of compressive strength, and an identical number of samples were created for the examination of tensile strength. These specimens were then tested using a universal testing apparatus. The results exhibited that both the compressive and diametral tensile strengths were significantly greater for the S-GIC cement in comparison to the C-GIC, with a notable p-value of 0.001. The findings suggest that S-GIC may be considered a viable alternative to conventional GIC.

Long-term clinical comparison of a resin-based composite and resin modified glass ionomer in the treatment of cervical caries lesions.

This 72-month study compared the clinical effectiveness of a resin-based composite (RBC) (Spectrum TPH3, Dentsply Sirona) with a resin-modified glass ionomer cement (RMGIC) (Riva Light Cure, SDI) in restoring cervical caries lesions (CCLs). Thirty-three patients, each with at least two CCLs, were enrolled. After caries removal, the dimensions of the cavities were recorded. In a split-mouth study design, a total of 110 restorations were randomly placed. Fifty-five restorations were placed with RBC using an etch-and-rinse adhesive system (Prime&Bond NT, Dentsply Sirona), while the remaining 55 were restored with RMGIC. The restorations were assessed at baseline, 6, 12, 18, 24, 36, 60, and 72 months according to modified USPHS criteria. Statistical analysis included Pearson Chi-square, Friedman tests, Kaplan Meier, and Logistic Regression analysis (p < 0.05). After 72 months, 47 restorations in 19 patients were evaluated (55% follow-up rate). Seventy-five percent of the RBC (n = 26) and 74% (n = 21) of the RMGIC restorations were fully retained. There were no significant differences between materials regarding retention and marginal adaptation (p > 0.05). Cavity dimensions, caries activity, and retention exhibited no correlation (p > 0.05). The increase in marginal staining in both groups over time was significant (p < 0.001). RMGIC restorations exhibited higher discoloration than RBC restorations (p = 0.014). At 72 months, three secondary caries lesions were detected in both restoration groups: two RMGIC and one RBC. There were no reports of sensitivity. After 72 months, both RBC and RMGIC restorations were clinically successful, with similar retention and marginal adaptation scores. However, it is noteworthy that RMGIC restorations tend to discoloration over time compared to RBC. The trial is registered in the database of "Clinical Trials". The registration number is NCT0372-2758, October 29, 2018.

Evaluation of setting kinetics, mechanical strength, ion release, and cytotoxicity of high-strength glass ionomer cement contained elastomeric micelles.

BACKGROUND: Low mechanical properties are the main limitation of glass ionomer cements (GICs). The incorporation of elastomeric micelles is expected to enhance the strength of GICs without detrimentally affecting their physical properties and biocompatibility. This study compared the chemical and mechanical properties, as well as the cytotoxicity, of elastomeric micelles-containing glass ionomer cement (DeltaFil, DT) with commonly used materials, including EQUIA Forte Fil (EF), Fuji IX GP Extra (F9), and Ketac Molar (KT). METHOD: Powder particles of GICs were examined with SEM-EDX. Setting kinetics were assessed using ATR-FTIR. Biaxial flexural strength/modulus and Vickers surface microhardness were measured after immersion in water for 24 h and 4 weeks. The release of F, Al, Sr, and P in water over 8 weeks was analyzed using a fluoride-specific electrode and ICP-OES. The toxicity of the material extract on mouse fibroblasts was also evaluated. RESULTS: High fluoride levels in the powder were detected with EF and F9. DT demonstrated an initial delay followed by a faster acid reaction compared to other cements, suggesting an improved snap set. DT also exhibited superior flexural strength than other materials at both 24 h and 4 weeks but lower surface microhardness (p < 0.05). EF and F9 showed higher release of F, Al, and P than DT and KT. There was no statistically significant difference in fibroblast viability among the tested materials (p > 0.05). CONCLUSIONS: Elastomeric micelles-containing glass ionomer cement (DT) exhibited satisfactory mechanical properties and cytocompatibility compared with other materials. DT could, therefore, potentially be considered an alternative high-strength GIC for load-bearing restorations.

A Comparative Evaluation of the Shear Bond Strength of Three Different Hybrid Tooth-Colored Restorative Materials to Dentin: An In-Vitro Study.

INTRODUCTION: Silver amalgam, glass ionomer, resin-modified glass ionomer, compomers, light polymerized hybrid composite resin, and hybrid glass ionomer are among the most frequent restorative materials used as cavity-based or post-endodontics. Thus, to meet the needs of both patients and dentists, Cention N reimagines the traditional filling by integrating bulk placement, ion release, and durability into a dual-curing, aesthetically pleasing solution. Hoewver, we do not have enough information from studies comparing this hybrid restorative material's shear bond strengths to dentin to draw any firm conclusions. Cention N, zirconomer, and Vitremer are three hybrid tooth-colored restorative materials that were evaluated for their shear bond strength to dentin. This research aimed to compare and evaluate these materials. METHODOLOGY: The purpose of this research was to use a universal Instron machine to measure the shear bond stress of three distinct hybrid tooth-colored restorative materials in relation to dentin. The research samples consisted of 45 extracted lower first premolars from humans. The teeth were then assigned into three groups of 15 samples each according to different color acrylic resin blocks, namely, group A (pink acrylic blocks), which had Cention in cement; group B (white acrylic blocks), which has zirconomer cement; and group C (violet acrylic blocks), which had Vitremer cement. RESULTS:  There was no statistically significant difference between the three groups and the normal distribution, as shown by the negligible values in the tests involving the three groups. Put simply, each of the three categories exhibits data that follows a normal distribution. This allows for further data analysis to be conducted using the parametric test of significance. CONCLUSION: The shear bond strength of hybrid glass ionomer restorative materials has to be further investigated in both laboratory and living organism settings.

Micro-shear bond strength of a novel resin-modified glass ionomer luting cement (eRMGIC) functionalized with organophosphorus monomer to different dental substrates.

Objectives: This study aims to assess and compare the micro-shear bond strength (µSBS) of a novel resin-modified glass-ionomer luting cement functionalized with a methacrylate co-monomer containing a phosphoric acid group, 30 wt% 2-(methacryloxy) ethyl phosphate (2-MEP), with different substrates (dentin, enamel, zirconia, and base metal alloy). This assessment is conducted in comparison with conventional resin-modified glass ionomer cement and self-adhesive resin cement. Materials and methods: In this in vitro study, ninety-six specimens were prepared and categorized into four groups: enamel (A), dentin (B), zirconia (C), and base metal alloys (D). Enamel (E) and dentin (D) specimens were obtained from 30 human maxillary first premolars extracted during orthodontic treatment. For zirconia and metal alloys, 48 disks were manufactured using IPS e.max ZirCAD through dry milling and Co-Cr powder alloy by selective laser milling. Each group was further subdivided into three subgroups (n = 8) according to the luting cement used: (1) Fuji PLUS resin-modified glass ionomer luting cement (FP) as a control cement, (2) modified control cement (eRMGIC), and (3) RelyX U 200 (RU 200) self-adhesive resin cement. The two-way analysis of variance and Tukey's HSD were used to assess the data obtained from measuring the µSBS of the samples. Results: The results of this study showed that the mean µSBS values of eRMGIC were statistically higher compared to FP in all tested groups (p < 0.001). The mean µSBS results of eRMGIC were non-significantly different from those recorded by RU 200 for all substrates except for the dentin substrate, where the RU200 cement produced significantly higher strength (p < 0.001). The failure modes were limited to a combination of mixed and adhesive failures without pure cohesive failure. Significance: The functionalization of FP with an organophosphorus co-monomer (2-MEP) directly affects the adhesion performance of the functionalized cement, which may be utilized to develop a new type of acid-base cement. It exhibited a performance comparable to that of resin-based cement and should serve well under different clinical conditions.

Addition of nisin to high-viscosity glass-ionomer cement: a comparative in vitro study on antibacterial and physical properties.

PURPOSE: Nisin is a lantibiotic effective against Gram-positive microorganisms such as Streptococcus mutans. The study aimed to determine the effect of the addition of nisin to high-viscosity glass-ionomer cement (HVGIC) on its antibacterial activity, setting time, surface microhardness, and compressive strength. METHODS: 1 and 3% w/w nisin were added to HVGIC before mixing. Unmodified HVGIC was the control. Agar disc diffusion, direct contact test, and scanning electron microscopy (SEM) analysis were used to evaluate antibacterial activity against S. mutans. Setting time, surface microhardness, and compressive strength were measured using Gilmore needle apparatus, digital microhardness tester, and universal testing machine, respectively. Statistical analysis included Student's t test, one-way ANOVA with Tamhane's post hoc test, and repeated-measures ANOVA. RESULTS: As evidenced by the agar disc diffusion (p < 0.001), direct contact tests (p = 0.025), and SEM analysis of the S. mutans cell count and cell surface area (p = 0.049 and 0.003), 3% nisin had the strongest antibacterial activity. There was a dose-dependent increase in setting time (p = 0.005) and surface microhardness (p = 0.006), with no significant difference in compressive strength compared to control. CONCLUSION: The addition of 3% nisin to HVGIC enhances the antibacterial action against S. mutans and surface microhardness without adversely affecting setting time and compressive strength.

Survival Analysis of Glass Ionomer Cement and Resin-Based Sealant Retention: A 10-Year Follow-Up Study.

Background and Objective: Sealant application is a proven method to prevent occlusal caries; however, long-term studies on this topic are scarce. This study aimed to assess the survival rate and clinical effectiveness of glass ionomer cement (GIC) and resin-based sealants (RBSs) on second permanent molars over a long-term follow-up period. Materials and methods: Sixteen patients aged 11-13 years with all four completely erupted permanent second molars were enrolled in the study. All patients attended 1-year and 3-year follow-ups; however, one participant did not respond after 10 years and was excluded from the final analyses. The oral health status evaluation was based on WHO criteria. A total of 32 teeth received an RBS (Clinpro), and a further 32 teeth were sealed with GIC (Fuji IX). The sealant retention was determined according to the Kilpatrick criteria after 1 year, 3 years, and 10 years, respectively. Statistical analysis included a chi-square test, the Kaplan-Meier method, and the Cox proportional hazard model. Results: At baseline, seven boys and eight girls participated in the study, with a mean age of 12.3 ± 0.9 years. The 1-year follow-up results revealed that 90% of the RBSs and 43.3% of the GIC sealants were completely retained, and no caries lesions were recorded (p = 0.01). The 3-year follow-up results showed that 23.3% of the RBSs and 0% of the GIC sealants demonstrated complete retention (p = 0.034). Moreover, 10.0% of the occlusal surfaces in the RBS group and 13.3% of the occlusal surfaces in the GIC group were filled (p > 0.05). A total of 6.7% of the RBSs showed complete retention. One-third of the sealed teeth (30.0% of the teeth sealed with RBSs and 36.7% of teeth applied with GIC) were filled after 10 years. The Kaplan-Meier analysis demonstrated a higher survival rate in the RBS group when compared with the GIC over the entire follow-up period (p = 0.001). Conclusions: Although the survival rate of RBSs was higher than GIC sealants, their effectiveness in preventing fissure caries in permanent second molars did not differ significantly over a 10-year follow-up.