Efeitos dos líquidos ativados com plasma atmosférico sobre Candida albicans / Application of plasma activated liquids on Candida albicans

O incremento no número de casos refratários aos tratamentos convencionais e a limitação de opções terapêuticas são alguns dos desafios encontrados no tratamento da candidose bucal, apontando para a necessidade de terapias alternativas. A utilização da tecnologia de plasma de forma indireta, pela exposição prévia de líquidos ex situ, tem mostrado resultados promissores, trazendo inúmeras vantagens para a aplicação clínica. Até o momento, pouco se conhece sobre a atividade antifúngica do líquido ativado com plasma (LAP) e não foram detectados relatos sobre sua aplicabilidade no tratamento da candidose bucal. Com base neste cenário, o objetivo deste projeto foi avaliar a atividade do líquido ativado com plasma sobre Candida albicans, principal agente etiológico da candidose bucal. Para tanto, foram determinadas as condições de obtenção do LAP com maior efeito antifúngico frente a C. albicans. O LAP foi gerado em um reator de plasma tipo arco deslizante (gliding arc). Os gases empregados incluíram argônio, ar comprimido seco e suas misturas em diversas concentrações, ajustando-se o fluxo de gás e a potência conforme necessário. Avaliou-se a eficácia antifúngica de diferentes líquidos ativados contra C. albicans, tanto em estado planctônico quanto em biofilmes, visando identificar o mais efetivo. As espécies reativas dos LAP foram caracterizadas utilizando técnicas espectrofotométricas, juntamente com a avaliação dos parâmetros físico-químicos. Os resultados dos ensaios foram submetidos a análise estatística, estabelecendo-se um nível de significância de 5% para a interpretação dos dados. Observou-se que a solução salina 0,9% ativada com plasma de argônio (S1), água destilada ativada com plasma de argônio (D1) e água destilada ativado com a mistura dos gases argônio e ar comprimido (S2) apresentaram a maior atividade antifúngica sobre células planctônicas de C. albicans quando expostas por 30 minutos ao LAP. O grupo D1 apresentou maior ação frente aos biofilmes de 24 e 48 horas e o S1 frente a biofilmes de 48 horas apenas quando exposto por 30 minutos ao LAP. Ambos os LAPs apresentaram ação antifúngica após terem sido congelados e armazenados por 1 dia após a ativação. Os grupos D1 e S1 não apresentaram perfil citotóxico nos ensaios realizados. Pode-se concluir que os LAPs apresentaram ação inibitória sobre células planctônicas e sobre biofilmes de C. albicans, sem citotoxicidade para células de mamíferos, sugerindo seu potencial como adjuvante às terapias para o controle da candidose.(AU)

The increase in the number of cases refractory to conventional treatments and the limitation of therapeutic options is due to some two challenges encountered in the treatment of oral candidiasis, pointing to the need for alternative therapies. The use of plasma technology indirectly, for the exposition of liquids ex situ, has shown promising results, providing numerous advantages for clinical application. Currently, little is known about the antifungal activity of plasma-activated liquid (LAP) and there are no reports on its applicability in oral candidiasis treatment. Based on this scenario, the objective of this project is to validate the application of plasma-activated liquid as an adjuvant in the treatment of oral candidiasis. Therefore, certain conditions for obtaining LAP have greater antifungal effect against Candida albicans. The LAP was generated in a gliding arc type plasma reactor. The gases used include argon, dry compressed and their mixtures in various concentrations, adjusting the gas flow and power as necessary. The antifungal efficacy of different liquids activated against C. albicans is evaluated, both in the planktonic state and in biofilms, aiming to identify the most effective. The relative species of LAP were characterized using spectrophotometric techniques, together with the evaluation of two physical-chemical parameters. The results of two tests were submitted to statistical analysis, establishing a significance level of 5% for the interpretation of the data. It was observed that the groups that presented the greatest antifungal activity in planktonic cells of C. albicans were the groups of 0.9% saline solution activated with argonium plasma (S1), or of distilled water activated with argonium plasma (D1). e or distilled water activated with a mixture of two argon gases and compressed air (S2). The D1 group presented against biofilms of 24 and 48 hours and the S1 against biofilms of only 48 hours. Both LAPs are presented with antifungal coating and have been frozen and stored for 1 day after activation. The groups D1 and S1 do not present a cytotoxic profile in the tests carried out. It can be concluded that the LAPs have antifungal activity on planktonic cells and on biofilms and do not present a toxicity profile for human cells, being potent adjuvants in therapies for or controlling infections caused by C. albicans (AU)

Effect of the pH on the Antibacterial Potential and Cytotoxicity of Different Plasma-Activated Liquids.

In this study, different plasma-activated liquids were evaluated for their antimicrobial effects against Escherichia coli, as well as for their cytotoxicity on mammalian cells. The PALs were prepared from distilled (DIS), deionized (DI), filtered (FIL), and tap (TAP) water. Additionally, 0.9% NaCl saline solution (SAL) was plasma-activated. These PALs were prepared using 5 L/min air gliding arc plasma jet for up to 60.0 min of exposure. Subsequently, the physicochemical properties, such as, the oxidation-reduction potential (ORP), the pH, the conductivity, and the total dissolved solids (TDS) were characterized by a water multiparameter. The PALs obtained showed a drastic decrease in the pH with increasing plasma exposure time, in contrast, the conductivity and TDS increased. In a general trend, the UV-vis analyses identified a higher production of the following reactive species of nitrogen and oxygen (RONS), HNO2, H2O2, NO3-, and NO2-. Except for the plasma-activated filtered water (PAW-FIL), where there was a change in the position of NO2- and NO3- at some pHs, The higher production of HNO2 and H2O2-reactive species was observed at a low pH. Finally, the standardized suspensions of Escherichia coli were exposed to PAL for up to 60.0 min. The plasma-activated deionized water (PAW-DI pH 2.5), plasma-activated distilled water (PAW-DIS pH 2.5 and 3), and plasma-activated tap water (PAW-TAP 3.5) showed the best antimicrobial effects at exposure times of 3.0, 10.0, and 30.0 min, respectively. The MTT analysis demonstrated low toxicity of all of the PAL samples. Our results indicate that the plasma activation of different liquids using the gliding arc system can generate specific physicochemical conditions that produce excellent antibacterial effects for E. coli with a safe application, thus bringing future contributions to creating new antimicrobial protocols.

Applications of Plasma-Activated Water in Dentistry: A Review.

The activation of water by non-thermal plasma creates a liquid with active constituents referred to as plasma-activated water (PAW). Due to its active constituents, PAW may play an important role in different fields, such as agriculture, the food industry and healthcare. Plasma liquid technology has received attention in recent years due to its versatility and good potential, mainly focused on different health care purposes. This interest has extended to dentistry, since the use of a plasma-liquid technology could bring clinical advantages, compared to direct application of non-thermal atmospheric pressure plasmas (NTAPPs). The aim of this paper is to discuss the applicability of PAW in different areas of dentistry, according to the published literature about NTAPPs and plasma-liquid technology. The direct and indirect application of NTAPPs are presented in the introduction. Posteriorly, the main reactors for generating PAW and its active constituents with a role in biomedical applications are specified, followed by a section that discusses, in detail, the use of PAW as a tool for different oral diseases.

Application of post-discharge region of atmospheric pressure argon and air plasma jet in the contamination control of Candida albicans biofilms

Introduction:Candida species are responsible for about 80% of hospital fungal infections. Non-thermal plasmas operated at atmospheric pressure are increasingly used as an alternative to existing antimicrobial strategy. This work investigates the action of post-discharge region of a non-thermal atmospheric plasma jet, generated by a gliding arc reactor, on biofilms of standard strain of Candida albicans grown on polyurethane substrate. Methods Samples were divided into three groups: (i) non-treated; (ii) treated with argon plasma, and (iii) treated with argon plus air plasma. Subsequently to plasma treatment, counting of colony-forming units (CFU/ml) and cell viability tests were performed. In addition, the surface morphology of the samples was evaluated by scanning electron microscopy (SEM) and optical profilometry (OP). Results Reduction in CFU/ml of 85% and 88.1% were observed in groups ii and iii, respectively. Cell viability after treatment also showed reduction of 33% in group ii and 8% in group iii, in comparison with group i (100%). The SEM images allow observation of the effect of plasma chemistry on biofilm structure, and OP images showed a reduction of its surface roughness, which suggests a possible loss of biofilm mass. Conclusion The treatment in post-discharge region and the chemistries of plasma jet tested in this work were effective in controlling Candida albicans biofilm contamination. Finally, it was evidenced that argon plus air plasma was the most efficient to reduce cell viability.