The importance of factorial design on the optimization of biosensor performance: immobilization of glucose oxidase as a case study.

Conventionally, the optimization of glucose biosensors is achieved by varying the concentrations of the individual reagents used to immobilize the enzyme. In this work, the effect and interaction between glucose oxidase enzyme (GOx), ferrocene methanol (Fc), and multi-walled carbon nanotubes (MWCNTs) at different concentrations were investigated by a design of experiments (DoE). For this analysis, a factorial design with three factors and two levels each was used with the software RStudio for statistical analysis. The data were obtained by electrochemical experiments on the immobilization of GOx-Fc/MWCNT at different concentrations. The results showed that the factorial DoE method was confirmed by the non-normality of the residuals and the outliers of the experiment. When examining the effects of the variables, analyzing the half-normal distribution and the effects and contrasts for GOx-Fc/MWCNT, the factors that showed the greatest influence on the electrochemical response were GOx, MWCNT, Fc, and MWCNT:Fc, and there is a high correlation between the factors GOx, MWCNT, Fc, and MWCNT:Fc, as shown by the analysis of homoscedasticity and multicollinearity. With these statistical analyses and experimental designs, it was possible to find the optimal conditions for different factors: 10 mM mL-1 GOx, 2 mg mL-1 Fc, and 15 mg mL-1 MWCNT show a greater amperometric response in the glucose oxidation. This work contributes to advancing enzyme immobilization strategies for glucose biosensor applications. Systematic investigation of DoE leads to optimized immobilization for GOx, enables better performance as a glucose biosensor, and allows the prediction of some outcomes.

Poly-L-lysine-modified with ferrocene to obtain a redox polymer for mediated glucose biosensor application.

Ferrocene-based polymers as redox mediators are considered versatile and important in the study of glucose biosensors. Poly-L-lysine (PLL), as a cationic polymer, possesses good properties including biocompatibility, biodegradation and water solubility. In this work, PLL was modified with ferrocene carboxylate in a very simple way by activating the carboxyl group of Fc, which reacted with the amino groups of the polymer. The resulting product was analysed by FTIR. Performance as a redox mediator (Fc-PLL) with the enzyme glucose oxidase was tested by cyclic voltammetry and showed an increase in the oxidation current in the presence of glucose in PBS pH 7.4. Additionally, performance as a biosensor was evaluated by amperometry and gave a linear range of 0-10 mM, a limit of detection of 23 µM, a sensitivity of 6.55 µA/cm2 mM and high selectivity. To evaluate the charged regions of Fc-PLL/GOx on the electrode surface, analysis by scanning electrochemical microscopy showed remarkable activity. The Fc-PLL redox polymer as a glucose biosensor has been well accepted as this kind of material, and the results showed remarkable activity as an electron transfer mediator between the redox polymer and the GOx enzyme.