Novel RP-HPLC-DAD approach for simultaneous determination of chlorphenoxamine hydrochloride and caffeine with their related substances.

Ensuring the quality control of active pharmaceutical ingredients is crucial for drug products being introduced into the market. Even for established drugs, it is necessary to maintain a cutting-edge impurity control system. To analyze caffeine and chlorphenoxamine hydrochloride in their binary mixture, as well as theophylline and chlorphenoxamine N-oxide as related substances, a reversed phase-high performance liquid chromatography combined with a diode array detector system was created. The chromatographic separation was conducted using a C18 X-select Waters® column. The mobile phase consisted of 20.0 mM potassium dihydrogen phosphate modified to pH 3 with o-phosphoric acid and methanol. A gradient elution program was adopted at a flow rate of 1.3 mL/min and detected at a wavelength of 222 nm. The present methodology demonstrates a concentration ranging from 2-60, 1-80, 0.5-20 to 0.4-20 µg/mL for chlorphenoxamine hydrochloride, caffeine, chlorphenoxamine N-Oxide and theophylline, respectively. Chlorphenoxamine N-Oxide, being an impurity of chlorphenoxamine was prepared by refluxing intact drug with 5% H2O2 for 24 h at 100 °C. One of the objectives of the analytical community is to promote the adoption of green analysis methods, which involve the development of environmentally friendly techniques. The levels of greenness and whiteness were evaluated using four specific tools: Eco-Scale System, GAPI, AGREE, and RGB tool. Furthermore, we have evaluated the greenness of the analytical method presented and compared its performance and greenness to that of the approach described in the literature. In this study, results from CPX and CAF analysis were compared to those obtained in a previous study. The result shows that there is no notable variation in precision and accuracy. The proposed method was validated in accordance with the requirements of ICH.

Enhancing Sustainable Analytical Chemistry in Liquid Chromatography: Guideline for Transferring Classical High-Performance Liquid Chromatography and Ultra-High-Pressure Liquid Chromatography Methods into Greener, Bluer, and Whiter Methods.

This review is dedicated to sustainable practices in liquid chromatography. HPLC and UHPLC methods contribute significantly to routine analytical techniques. Therefore, the transfer of classical liquid chromatographic methods into sustainable ones is of utmost importance in moving toward sustainable development goals. Among other principles to render a liquid chromatographic method green, the substitution of the organic solvent component in the mobile phase with a greener one received great attention. This review concentrates on choosing the best alternative green organic solvent to replace the classical solvent in the mobile phase for easy, rapid transfer to a more sustainable normal phase or reversed-phase liquid chromatography. The main focus of this review will be on describing the transfer of non-green to green and white chromatographic methods in an effort to elevate sustainability best practices in analytical chemistry. The greenness properties and greenness ranking, in addition to the chromatographic suitability of seventeen organic solvents for liquid chromatography, are mentioned to have a clear insight into the issue of rapidly choosing the appropriate solvent to transfer a classical HPLC or UHPLC method into a more sustainable one. A simple guide is proposed for making the liquid chromatographic method more sustainable.

Lignin-based emulsive liquid-liquid microextraction for detecting triazole fungicides in water, juice, vinegar, and alcoholic beverages via UHPLC-MS/MS.

A universal, green, and rapid lignin-based emulsive liquid-liquid microextraction (ELLME) method was established to detect nine triazole fungicides in water, juice, vinegar, and alcoholic beverages via UHPLC-MS/MS. By employing an environmentally friendly emulsifier (lignin), the proposed ELLME was compatible with more extractants, and not restricted to fatty acids. Due to the high amphiphilic properties and three-dimensional structure of lignin, the emulsion was quickly formed through several aspirate-dispense cycles of the green extractant (guaiacol) and lignin solution. And a micropipette was used for rapid microextraction. The limit of detection was 0.0002-0.0057 µg L-1. The extraction recoveries and relative standard deviation were 81.7%-102.0% and 0.9%-7.1%, respectively. Finally, three green metric tools were used to verify the greenness of the whole procedure. The proposed lignin-based ELLME successfully emulsified green solvents, indicating that emerging solvents may be excellent alternatives as extractants in ELLME for pesticide residue analysis in food samples.

Optimizing Antimony Speciation Analysis via Frontal Chromatography-ICP-MS to Explore the Release of PET Additives.

Antimony (Sb) contamination poses significant environmental and health concerns due to its toxic nature and widespread presence, largely from anthropogenic activities. This study addresses the urgent need for an accurate speciation analysis of Sb, particularly in water sources, emphasizing its migration from polyethylene terephthalate (PET) plastic materials. Current methodologies primarily focus on total Sb content, leaving a critical knowledge gap for its speciation. Here, we present a novel analytical approach utilizing frontal chromatography coupled with inductively coupled plasma mass spectrometry (FC-ICP-MS) for the rapid speciation analysis of Sb(III) and Sb(V) in water. Systematic optimization of the FC-ICP-MS method was achieved through multivariate data analysis, resulting in a remarkably short analysis time of 150 s with a limit of detection below 1 ng kg-1. The optimized method was then applied to characterize PET leaching, revealing a marked effect of the plastic aging and manufacturing process not only on the total amount of Sb released but also on the nature of leached Sb species. This evidence demonstrates the effectiveness of the FC-ICP-MS approach in addressing such an environmental concern, benchmarking a new standard for Sb speciation analysis in consideration of its simplicity, cost effectiveness, greenness, and broad applicability in environmental and health monitoring.

Microchip isotachophoresis for green and sustainable pharmaceutical quality control: Method validation and application to complex pharmaceutical formulations.

Universal microchip isotachophoresis (µITP) methods were developed for the determination of cationic and anionic macrocomponents (active pharmaceutical ingredients and counterions) in cardiovascular drugs marketed in salt form, amlodipine besylate and perindopril erbumine. The developed methods are characterized by low reagent and sample consumption, waste production and energy consumption, require only minimal sample preparation and provide fast analysis. The greenness of the proposed methods was assessed using AGREE. An internal standard addition was used to improve the quantitative parameters of µITP. The proposed methods were validated according to the ICH guideline. Linearity, precision, accuracy and specificity were evaluated for each of the studied analytes and all set validation criteria were met. Good linearity was observed in the presence of matrix and in the absence of matrix, with a correlation coefficient of at least 0.9993. The developed methods allowed precise and accurate determination of the studied analytes, the RSD of the quantitative and qualitative parameters were less than 1.5% and the recoveries ranged from 98 to 102%. The developed µITP methods were successfully applied to the determination of cationic and anionic macrocomponents in six commercially available pharmaceutical formulations.

Green method by National Environmental Methods Index and Eco-Scale Assessment for evaluation of gatifloxacin-based product by HPLC.

The literature reveals gaps in the availability of green analytical methods for assessing products containing gatifloxacin (GFX), a fluoroquinolone. Presently, method development is supported by tools such as the National Environmental Methods Index (NEMI) and Eco-Scale Assessment (ESA), which offer objective insights into the environmental friendliness of analytical procedures. The objective of this work was to develop and validate a green method by the NEMI and ESA to quantify GFX in eye drops using HPLC. The method utilized a C8 column (4.6 × 150 mm, 5 µm), with a mobile phase of purified water containing 2% acetic acid and ethanol (70:30, v/v). The injection volume was 10 µL and the flow rate was 0.7 mL/min in isocratic mode at 25°C, with detection performed at 292 nm. The method demonstrated linearity in the range of 2-20 µg/mL, and precision at intra-day (relative standard deviation [RSD] 1.44%), inter-day (RSD 3.45%), and inter-analyst (RSD 2.04%) levels. It was selective regarding the adjuvants of the final product (eye drops) and under forced degradation conditions. The method was accurate (recovery 101.07%) and robust. The retention time for GFX was approximately 3.5 min. The greenness of the method, as evaluated by the NEMI, showed four green quadrants, and by ESA, it achieved a score of 88.

High-throughput and green optical sensing of thiocyanate in human saliva based on microplates and an overhead book scanner as detector.

An instrumental-free, high-throughput assay has been developed for the quantification of thiocyanate in human saliva. The proposed green method is based on the rapid reaction of the analyte with Fe(III) under acidic pH in a microplates format to form a colored complex that is captured as an image by an overhead book scanner. Optimization included the effects of the amount concentration of Fe(III), acidity and reaction time / complex stability using a total volume of 300 µL per well. Validation towards the matrix effect was focused on the specific application and was performed using both artificial and human saliva. The linearity of the developed assay was up to 500 µM thiocyanate offering a lower limit of quantification (LLOQ) of 30 µM. The green potentials were evaluated by both the Green Analytical Procedure (GAPI) and Blue Applicability Grade (BAGI) indexes. The thiocyanate content in the saliva of non-smoking volunteers ranged between 750 and 1350 µΜ, while elevated concentrations were verified in smoking individuals (1860-3080 µΜ). Statistical agreement with a corroborative method was assessed using the Bland-Altman plot.

Eco-friendly cobalt-doped carbon quantum dots for spectrofluorometric determination of pregabalin in pharmaceutical capsules.

The misuse of pregabalin has become a significant issue over the last decade. Consequently, there is a growing demand for a sensitive and selective method for its determination. In this study, an eco-friendly cobalt-doped carbon quantum dots (CQDs) have been fabricated and applied as nanoprobes for the fluorometric determination of pregabalin. The CQDs were synthesized through mixed doping with non-metallic atoms such as nitrogen and sulfur, and a metal ion, cobaltous ion, via a microwave-assisted method in just 1.5 min. The synthesized Co-NS-CQDs exhibited advantageous characteristics, including rapid response times, compatibility with various pH levels, exceptional detection limits, high sensitivity, and excellent selectivity. The Co-NS-CQDs exhibited a high quantum yield (55 %) relative to NS-CQDs (38 %), with blue emissive light at 438 nm. The assessment of pregabalin was based on its enhancement effect on the native fluorescence intensity of CQDs. The proposed method had a good linearity over the range of 25-250 µg/mL, with a limit of detection of 4.17 µg/mL and a limit of quantitation of 12.63 µg/mL, respectively. The prepared NS-CQDs have been successfully applied for the pregabalin determination in pharmaceutical capsules, with excellent % recovery (98-102 %). The greenness of the developed method has been investigated using different greenness metrics, in comparison with the reported RP HPLC method. The greenness characteristics of the method originated from the synthesis of CQDs, utilizing sustainable, readily available, and cost-effective starting materials.

Deep eutectic solvent for the extraction of polycyclic aromatic compounds in fuel, food and environmental samples.

Polycyclic aromatic compounds (PACs) encompass a wide variety of organic analytes that have mutagenic and carcinogenic potentials for human health and are recalcitrant in the environment. Evaluating PACs levels in fuel (e.g., gasoline and diesel), food (e.g., grilled meat, fish, powdered milk, fruits, honey, and coffee) and environmental (e.g., industrial effluents, water, wastewater and marine organisms) samples are critical to determine the risk that these chemicals pose. Deep eutectic solvents (DES) have garnered significant attention in recent years as a green alternative to traditional organic solvents employed in sample preparation. DES are biodegradable, have low toxicities, ease of synthesis, low cost, and a remarkable ability to extract PACs. However, no comprehensive assessment of the use of DESs for extracting PACs from fuel, food and environmental samples has been performed. This review focused on research involving the utilization of DESs to extract PACs in matrices such as PAHs in environmental samples, NSO-HET in fuels, and bisphenols in foods. Chromatographic methods, such as gas chromatography (GC) and high-performance liquid chromatography (HPLC), were also revised, considering the sensibility to quantify these compound types. In addition, the characteristics of DES and advantages and limitations for PACs in the context of green analytical chemistry principles (GAC) and green profile based on metrics provide perspective and directions for future development.

Rapid screening of drugs in environmental water using metal organic framework/Ti3C2Tx composite coated blade spray-mass spectrometry.

Simultaneous rapid screening of multiple drugs of abuse in environmental water facilitates effective monitoring and trend assessments. Herein, a novel porphyrin-based metal organic frameworks modified Ti3C2Tx nanosheets (Cu-TCPP/Ti3C2Tx) composite was prepared and utilized as solid-phase microextraction (SPME) coating for the simultaneous analysis of 21 drugs from water samples. The composite was embedded with matrix-compatible polyacrylonitrile binder to prepare a coated blade with thin and uniform coating layer. Ambient mass spectrometry (MS) technique was used to create a coated blade spray-MS (CBS-MS) method for the quantitative determination of drugs in water samples. High throughput and automated sample preparation were achieved with the use of a Concept 96-well plate system, enabling analysis of 21 drugs of abuse within 1 min per sample, while using only 8 µL of organic solvent for desorption and CBS-MS detection. The developed method showed favorable linearity (R2 ≥ 0.9983) in the range of 0.05 to 10 ng mL-1, low limits of detection (1.5-9.0 ng L-1), sufficient recovery (67.6-133.2%), as well as satisfactory precision (RSDs≤13.5%). This study not only delivers a novel and efficient SPME coating composite, but also demonstrates the excellent performance of a high-throughput, efficient, and green analytical method for determination of drugs in environmental water.

Search for new green natural solid phases for sample preparation for PAHs determination in seafood samples followed by LC and GC-MS/MS analysis.

Polycyclic aromatic hydrocarbons (PAHs) are carcinogenic organic pollutants found in various environments, notably aquatic ecosystems and the food chain, posing significant health risks. Traditional methods for detecting PAHs in food involve complex processes and considerable reagent usage, raising environmental concerns. This study explores eco-friendly approaches suing solid phases derived from natural sources in matrix solid phase dispersion. We aimed to develop, optimize, and validate a sample preparation technique for seafood, employing natural materials for PAH analysis. Ten natural phases were compared with a commercial reference phase. The methodology involved matrix solid phase dispersion and pressurized liquid extraction, followed by liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). Three solid phases (perlite, sweet manioc starch, and barley) showed superior performance in LC-MS/MS and were further evaluated with gas chromatography-tandem mass spectrometry (GC-MS/MS), confirming perlite as the most effective phase. Validation followed Brazilian regulatory guidelines and European Community Regulation 2021/808/EC. The resulting method offered advantages in cost-effectiveness, reduced environmental impact, cleaner extracts, and enhanced analytical performance compared to the reference solid phase and LC-MS/MS. Proficiency analysis confirmed method reliability, with over 50% alignment with green analytical chemistry principles. In conclusion, this study developed an environmentally sustainable sample preparation technique for seafood analysis using natural solid phases, particularly perlite, for PAH determination.

Exploring the potentialities of a biodegradable polymeric film in sample preparation: An optimized "white" protocol to extract and quantify emerging contaminants in water.

BACKGROUND: The introduction of white analytical chemistry encourages the development of methods characterized by a balance among greenness, productivity/feasibility and analytical performances. In the environmental analysis of emerging contaminants (ECs), for which high sensitivity and specificity are mandatory, the use of green and sustainable sample preparation needs to be coupled to a reliable analytical determination. Herein, an extraction method based on the use of a biodegradable polymeric film (Mater-Bi) and coupled to LC-MS/MS analysis was developed for the sensitive determination of ECs in wastewater. RESULTS: The interaction among a range of ECs and the Mater-Bi film (a commercially available patented blend of polybutylene-terephthalate, starch and fatty acids) was investigated by two sequential experimental designs, to simultaneously study several factors and optimize extraction efficiency. The final method, resembling a fabric phase sorptive extraction, involved pH and ionic strength modification of the sample, 1h extraction and desorption in ethanol. Satisfactory recoveries from real wastewater were obtained for sixteen analytes (56-116 %), as well as excellent precision (inter-day relative standard deviations below 10 % for most compounds). Matrix effect was in the range 88-116 % at the lower pre-concentration factor, but also acceptable in most cases at the higher pre-concentration factor. LODs in matrix, from 0.004 to 0.159 µg L-1, were lower than or comparable to those from recent studies employing green extraction procedures. The method demonstrated its applicability to samples from wastewater treatment plants, allowing quantification of pharmaceuticals and UV filters at the µg L-1 and ng L-1 levels, respectively. SIGNIFICANCE: For the first time, the synthetic biopolymer Mater-Bi, so far unexplored for the use in analytical chemistry, was exploited for a green, simple and extremely cheap extraction protocol. The optimized method is suitable for several ECs, guaranteeing very good accuracy, precision and specificity, also thanks to the LC-MS/MS analysis. The evaluation by green and white analytical chemistry metrics highlighted its superiority to conventional extraction methods.

A technique based on infrared spectroscopy for determining sulfanilamide levels sustainably: Progress and comparisons of greenness and whiteness using ComplexGAPI, AGREE, and RGB.

The study aimed to determine the potential of the infrared (IR) spectrophotometric technique for measuring the content of sulphanilamide with the sulfonamide group. The study aimed to obtain the IR spectra of sulfanilamide and use the -SO2 band at 1114.37 for the quantitative assay, determining its area under the curve (AUC). The study gives an alternative approach to existing analytical techniques that require vast amounts of organic solvents, which are costly and can be toxic, thus impacting the environment and increasing the analysis cost. The study evaluated the method's whiteness and greenness by utilizing the Complex green analytical procedure index, analytical GREEness calculator and Red Green Blue algorithm tool. The linierity was found to be 5 to 30 µg/ml. The present study has developed an infrared (IR) spectroscopic method that employs a straightforward sample preparation technique in methanol. The IR spectroscopic method's linearity range was determined to be 5-30 µg/ml. The p-value was 0.001 at 95 % confidence level assuring better recovery. This method is evaluated according to the Q2R1 ICH guideline. It is applicable to routine quality control analysis without pre-extraction using green IR spectroscopy. In conclusion, the study demonstrated that IR spectrophotometric techniques can quantify sulfanilamide while reducing the use of organic solvents, contributing to the green-and-white analytical chemistry approach. The developed methods are reliable, accurate, and cost-effective and have the potential to be implemented in routine analysis of sulfanilamide.

Multi-criteria decision analysis: technique for order of preference by similarity to ideal solution for selecting greener analytical method in the determination of mifepristone in environmental water samples.

This work proposes the use of multi-criteria decision analysis (MCDA) to select a more environmentally friendly analytical procedure. TOPSIS, which stands for Technique for Order of Preference by Similarity to Ideal Solution, is an example of a MCDA method that may be used to rank or select best alternative based on various criteria. Thirteen analytical procedures were used in this study as TOPSIS input choices for mifepristone determination in water samples. The input data, which consisted of these choices, was described using assessment criteria based on 12 principles of green analytical chemistry (GAC). Based on the objective mean weighting (MW), the weights for each criterion were assigned equally. The most preferred analytical method according to the ranking was solid phase extraction with micellar electrokinetic chromatography (SPE-MEKC), while solid phase extraction combined with ultra-high performance liquid chromatography tandem mass spectrometry (SPE-UHPLC-MS/MS) was ranked last. TOPSIS ranking results were also compared to the green metrics NEMI, Eco-Scale, GAPI, AGREE, and AGREEprep that were used to assess the greenness of thirteen analytical methods for mifepristone determination. The results demonstrated that only the AGREE metric tool correlated with TOPSIS; however, there was no correlation with other metric tools. The analysis results suggest that TOPSIS is a very useful tool for ranking or selecting the analytical procedure in terms of its greenness and that it can be easily integrated with other green metrics tools for method greenness assessment.

Nanocomposite microbeads made of recycled polylactic acid for the magnetic solid phase extraction of xenobiotics from human urine.

Nanocomposite microbeads (average diameter = 10-100 µm) were prepared by a microemulsion-solidification method and applied to the magnetic solid-phase extraction (m-SPE) of fourteen analytes, among pesticides, drugs, and hormones, from human urine samples. The microbeads, perfectly spherical in shape to maximize the surface contact with the analytes, were composed of magnetic nanoparticles dispersed in a polylactic acid (PLA) solid bulk, decorated with multi-walled carbon nanotubes (mPLA@MWCNTs). In particular, PLA was recovered from filters of smoked electronic cigarettes after an adequate cleaning protocol. A complete morphological characterization of the microbeads was performed via Fourier-transform infrared (FTIR) spectroscopy, UV-Vis spectroscopy, thermogravimetric and differential scanning calorimetry analysis (TGA and DSC), scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD). The recovery study of the m-SPE procedure showed yields ≥ 64%, with the exception of 4-chloro-2-methylphenol (57%) at the lowest spike level (3 µg L-1). The method was validated according to the main FDA guidelines for the validation of bioanalytical methods. Using liquid chromatography-tandem mass spectrometry, precision and accuracy were below 11% and 15%, respectively, and detection limits of 0.1-1.8 µg L-1. Linearity was studied in the range of interest 1-15 µg L-1 with determination coefficients greater than 0.99. In light of the obtained results, the nanocomposite microbeads have proved to be a valid and sustainable alternative to traditional sorbents, offering good analytical standards and being synthetized from recycled plastic material. One of the main objectives of the current work is to provide an innovative and optimized procedure for the recycling of a plastic waste, to obtain a regular and reliable microstructure, whose application is here presented in the field of analytical chemistry. The simplicity and greenness of the method endows the procedure with a versatile applicability in different research and industrial fields.

Development and validation of an analytical methodology based on solvent microextraction and UHPLC-MS/MS for determining bisphenols in honeys from different botanical origins.

A new analytical methodology was proposed to determine fourteen bisphenols in honeys from different botanical origins using ultra-high performance liquid chromatography-tandem mass spectrometry. A fast, efficient, environmentally-friendly and simple sample treatment (recoveries between 81% and 116%; matrix effect <20% for all studied compounds except for bisphenol E, F and S) was proposed, which involved a solvent microextraction with acetone and a small volume/amount of 1-hexanol. Chromatographic analysis (< 15 min) was performed in a Kinetex EVO C18 column under gradient elution mode. The method was validated in terms of selectivity, limits of detection (0.2-1.5 µg/kg) and quantification (0.5-4.7 µg/kg), linearity, matrix effect, trueness, and precision (relative standard deviation <17%). Finally, thirty honey samples were analyzed, revealing the presence of residues of nine bisphenols in some of them. However, quantification was possible only in two cases for bisphenol A, with a concentration of approximately 13 µg/kg.

A novel honeycomb-like 3D-printed device for rotating-disk sorptive extraction of organochlorine and organophosphorus pesticides from environmental water samples.

In this study, 3D-printing based on fused-deposition modeling (FDM) was employed as simple and cost-effective strategy to fabricate a novel format of rotating-disk sorptive devices. As proof-of-concept, twenty organochlorine and organophosphorus pesticides were determined in water samples through rotating-disk sorptive extraction (RDSE) using honeycomb-like 3D-printed disks followed by gas chromatography coupled to mass spectrometry (GC-MS). The devices that exhibited the best performance were comprised of polyamide + 15 % carbon fiber (PA + 15 % C) with the morphology being evaluated through X-ray microtomography. The optimized extraction conditions consisted of 120 min of extraction using 20 mL of sample at stirring speed of 1100 rpm. Additionally, liquid desorption using 800 µL of acetonitrile for 25 min at stirring speed of 1100 rpm provided the best response. Importantly, the methodology also exhibited high throughput since an extraction/desorption platform that permitted up to fifteen simultaneous extractions was employed. The method was validated, providing coefficients of determination higher than 0.9706 for all analytes; limits of detection (LODs) and limits of quantification (LOQs) ranged from 0.15 to 3.03 µg L-1 and from 0.5 to 10.0 µg L-1, respectively. Intraday precision ranged from 4.01 to 18.73 %, and interday precision varied from 4.83 to 20.00 %. Accuracy was examined through relative recoveries and ranged from 73.29 to 121.51 %. This method was successfully applied to analyze nine groundwater samples from monitoring wells of gas stations in São Paulo. Moreover, the greenness was assessed through AGREEprep metrics, and an overall score of 0.69 was obtained indicating that the method proposed can be considered sustainable.

Greenness assessment of microextraction techniques in therapeutic drug monitoring.

Aim: In this study, we evaluated the greenness and whiteness scores for microextraction techniques used in therapeutic drug monitoring. Additionally, the cons and pros of each evaluated method and their impacts on the provided scores are also discussed. Materials & methods: The Analytical Greenness Sample Preparation metric tool and white analytical chemistry principles are used for related published works (2007-2023). Results & conclusion: This study provided valuable insights for developing methods based on microextraction techniques with a balance in greenness and whiteness areas. Some methods based on a specific technique recorded higher scores, making them suitable candidates as green analytical approaches, and some others achieved high scores both in green and white areas with a satisfactory balance between principles.

[Box: see text].

A design of experiment based RP-HPLC method for the simultaneous estimation of antihypertensive drugs with greenness assessment.

The correlation between blood pressure (BP) and cardiovascular risk has a continuous, positive, and linear pattern. Lowering high BP decreases the risk associated with cardiovascular disease. Chlorthalidone (CHD) and Losartan potassium (LOS) combination is used to treat hypertension. The analytical community was concerned with minimizing or reducing the use of toxic chemicals and solvents. Therefore, the current study aimed to develop a rapid, sensitive, and cost-effective green RP-HPLC method to determine CHD and LOS simultaneously in a short analysis of time. Method optimization was performed by Central composite design (CCD), the flow rate and the change of time were chosen as factors. Effective separation was conducted on Zorbax SB-C18 (4.6 mm × 150 mm, 5 µm) column by gradient mobile phase comprising phosphate buffer and ethanol flowing at 0.859 ml/min, and the wavelength detected at 230 nm. As per ICH criteria, the technique was proven to be precise, accurate, and linear over the concentration range of 4.3-8.1 µg/ml for CHD and 35-65 µg/ml for LOS. Furthermore, the method's greenness was examined by three different metrics, confirming that less toxic effect on the environment. Hence, the optimized approach proves to be eco-friendly, simple, and robust for the concurrent evaluation of CHD and LOS in pharmaceutical formulations.