Essential oils loaded carboxymethylated Cassia fistula gum-based novel hydrogel films for wound healing.

Carboxymethylated Cassia fistula gum (CCFG) and citric acid (CA) based wound healing film, (CCFG-CA) was developed using the solvent casting method. Glycerol was added as a plasticizing agent. The synthesized Carboxymethylated Cassia fistula gum cross-linked citric acid based hydrogel film (CCFG-CA) was evaluated morphologically, thermally, and structurally using FESEM, TGA, XRD and FTIR. Three essential oils (EO), rosemary (Rosmarinus officinalis), turmeric (Curcuma longa) and thuja (Thuja occidentalis L), known for antimicrobial and antioxidant activities, were loaded into the CCFG-CA film to develop essential oils loaded carboxymethylated Cassia fistula gum cross-linked citric acid based hydrogel film (CCFG-CA-EO). In vitro studies (MTT assay, disk diffusion assay, permeability tests and DPPH assay) confirm the biocompatibility, anti-oxidant and anti-microbial properties of the CCFG-CA-EO film. In vivo (wound healing studies on wistar rats and their histology) shows 99 % of wound healing and re-epithelialization in 14 days. Degradability (within 15 days), protein adsorption (12.05 µg/mL) and contact angle determination (69.43°×„ׄ ± 0.48) tests confirmed the potential of CCFG-CA-EO as an effective wound-healing material.

Engineering bi-layered skin-like nanopads with electrospun nanofibers and chitosan films for promoting fibroblast infiltration in tissue regeneration and wound healing.

This study presents an innovative bi-layered three-dimensional skin-like nanopad (SLN) engineered for skin tissue regeneration. The SLN integrates a mechanically supportive polycaprolactone nanofibrous layer with a functional chitosan hydrogel film, mimicking natural skin. Our SLN exhibits superior flexibility, with a maximum elongation of 751.71 ± 125 % and exceptional porosity of 95 ± 4.5 %, ensuring effective exudate management due to its high water uptake capacity (4393 ± 72 %). FTIR analysis confirmed a distinctive fiber-hydrogel network within the SLN, which serves as a barrier against Staphylococcus aureus and Pseudomonas aeruginosa infiltration. In vitro cell viability assays with the human fibroblast have consistently demonstrated that 3D bi-layered SLN enhances fibroblast attachment, infiltration, and proliferation by 150 ± 20 %. In vivo studies in a rat model demonstrated significantly faster wound closure, with 60 % on day 7 and 87 % on day 10, compared to the 30 % and 60 % in controls, highlighting the efficacy of SLN. By mimicking the architecture of native skin, this biomimetic bi-layered SLN scaffold provides flexibility and support while accelerating in vivo wound closure by promoting fibroblast proliferation and infiltration. Customizable in size, depth, and shape, the engineered SLN has emerged as a promising platform for advanced wound care and tissue engineering.

Phage therapy combined with Gum Karaya injectable hydrogels for treatment of methicillin-resistant Staphylococcus aureus deep wound infection in a porcine model.

Skin and soft tissue infections (SSTIs) represent a significant healthcare challenge, particularly in the context of increasing antibiotic resistance. This study investigates the efficacy of a novel therapeutic approach combining bacteriophage (phage) therapy with a gum Karaya (GK)-based hydrogel delivery system in a porcine model of deep staphylococcal SSTIs. The study exploits the lytic activity and safety of the Staphylococcus phage 812K1/420 of the Kayvirus genus, which is active against methicillin-resistant Staphylococcus aureus (MRSA). The GK injectable hydrogels and hydrogel films, developed by our research group, serve as effective, non-toxic, and easy-to-apply delivery systems, supporting moist wound healing and re-epithelialization. In the porcine model, the combined treatment showed asynergistic effect, leading to a significant reduction in bacterial load (2.5 log CFU/gram of tissue) within one week. Local signs of inflammation were significantly reduced by day 8, with clear evidence of re-epithelialization and wound contraction. Importantly, no adverse effects of the GK-based delivery system were observed throughout the study. The results highlight the potential of this innovative therapeutic approach to effectively treat deep staphylococcal SSTIs, providing a promising avenue for further research and clinical application in the field of infections caused by antibiotic-resistant bacteria.

Development and characterization of polyethylene oxide and guar gum-based hydrogel; a detailed in-vitro analysis of degradation and drug release kinetics.

Herein, we synthesized hydrogel films from crosslinked polyethylene oxide (PEO) and guar gum (GG) which can offer hydrophilicity, antibacterial efficacy, and neovascularization. This study focuses on synthesis and material/biological characterization of rosemary (RM) and citric acid (CA) loaded PEO/GG hydrogel films. Scanning Electron Microscopy images confirmed the porous structure of the developed hydrogel film matrix (PEO/GG) and the dispersion of RM and CA within it. This porous structure promotes moisture adsorption, cell attachment, proliferation, and tissue layer formation. Fourier Transform Infrared Spectroscopy (FTIR) further validated the crosslinking of the PEO/GG matrix, as confirmed by the appearance of C-O-C linkage in the FTIR spectrum. PEO/GG and PEO/GG/RM/CA revealed similar degradation and release kinetics in Dulbecco's Modified Eagle Medium, Simulated Body Fluid, and Phosphate Buffer Saline (degradation of ∼55 % and release of ∼60 % RM in 168 h.). The developed hydrogel film exhibited a zone of inhibition against Escherichia. coli (2 mm) and Staphylococcus. aureus (9 mm), which can be attributed to the presence of RM in the hydrogel film. Furthermore, incorporating CA in the hydrogel film promoted neovascularization, as confirmed by the Chorioallantoic Membrane Assay. The developed RM and CA-loaded PEO/GG-based hydrogel films offered suitable in-vitro properties that may aid in potential wound healing applications.

ß-cyclodextrin/spiropyran-functionalized optical-driven hydrogel film for bisphenol A detection in food packaging.

Bisphenol A (BPA), an endocrine disruptor, is widely used in food packaging materials, including drink containers. Sensitive detection of BPA is crucial to food safety. Herein, we have developed a novel optical-driven hydrogel film sensor for sensitive BPA detection based on the displacement of spiropyran (SP) from ß-cyclodextrin (ß-CD) cavity by BPA followed by the photochromism of the released SP. The released SP converts to the ring-opened merocyanine form which shows an enhanced red fluorescence in the dark. The sensor demonstrates a linear detection range from 0.1 to 20 µg mL-1 with a limit of detection at 0.027 µg mL-1 and a limit of quantification at 0.089 µg mL-1. Notably, the proposed ß-CD/SP hydrogel can be reused due to the reversible isomerization of SP and the reversible host-guest interaction. This sensor also shows good performance for BPA determination in real samples, indicating its great potential for food safety monitoring.

Accelerated full-thickness skin wound tissue regeneration by self-crosslinked chitosan hydrogel films reinforced by oxidized CNC-AgNPs stabilized Pickering emulsion for quercetin delivery.

BACKGROUND: The non-toxic self-crosslinked hydrogel films designed from biocompatible materials allow for controlled drug release and have gathered remarkable attention from healthcare professionals as wound dressing materials. Thus, in the current study the chitosan (CS) film is infused with oil-in-water Pickering emulsion (PE) loaded with bioactive compound quercetin (Qu) and stabilized by dialdehyde cellulose nanocrystal-silver nanoparticles (DCNC-AgNPs). The DCNC-AgNPs play a dual role in stabilizing PE and are involved in the self-crosslinking with CS films. Also, this film could combine the advantage of the controlled release and synergistic wound-healing effect of Qu and AgNPs. RESULTS: The DCNC-AgNPs were synthesized using sodium periodate oxidation of CNC. The DCNC-AgNPs were used to stabilize oil-in-water PE loaded with Qu in its oil phase by high speed homogenization. Stable PEs were prepared by 20% v/v oil: water ratio with maximum encapsulation of Qu in the oil phase. The Qu-loaded PE was then added to CS solution (50% v/v) to prepare self-crosslinked films (CS-PE-Qu). After grafting CS films with PE, the surface and cross-sectional SEM images show an inter-penetrated network within the matrix between DCNC and CS due to the formation of a Schiff base bond between the reactive aldehyde groups of DCNC-AgNPs and amino groups of CS. Further, the addition of glycerol influenced the extensibility, swelling ratio, and drug release of the films. The fabricated CS-PE-Qu films were analyzed for their wound healing and tissue regeneration potential using cell scratch assay and full-thickness excisional skin wound model in mice. The as-fabricated CS-PE-Qu films showed great biocompatibility, increased HaCat cell migration, and promoted collagen synthesis in HDFa cells. In addition, the CS-PE-Qu films exhibited non-hemolysis and improved wound closure rate in mice compared to CS, CS-Qu, and CS-blank PE. The H&E staining of the wounded skin tissue indicated the wounded tissue regeneration in CS-PE-Qu films treated mice. CONCLUSION: Results obtained here confirm the wound healing benefits of CS-PE-Qu films and project them as promising biocompatible material and well suited for full-thickness wound healing in clinical applications.

Rapid in situ formation of κ-carrageenan-carboxymethyl chitosan-kaolin clay hydrogel films enriched with arbutin for enhanced preservation of cherry tomatoes.

Food waste resulting from perishable fruits and vegetables, coupled with the utilization of non-renewable petroleum-based packaging materials, presents pressing challenges demanding resolution. This study addresses these critical issues through the innovative development of a biodegradable functional plastic wrap. Specifically, the proposed solution involves the creation of a κ-carrageenan/carboxymethyl chitosan/arbutin/kaolin clay composite film. This film, capable of rapid in-situ formation on the surfaces of perishable fruits, adeptly conforms to their distinct shapes. The incorporation of kaolin clay in the composite film plays a pivotal role in mitigating water vapor and oxygen permeability, concurrently bolstering water resistance. Accordingly, tensile strength of the composite film experiences a remarkable enhancement, escalating from 20.60 MPa to 34.71 MPa with the incorporation of kaolin clay. The composite film proves its efficacy by preserving cherry tomatoes for an extended period of 9 days at 28 °C through the deliberate delay of fruit ripening, respiration, dehydration and microbial invasion. Crucially, the economic viability of the raw materials utilized in the film, coupled with the expeditious and straightforward preparation method, underscores the practicality of this innovative approach. This study thus introduces an easy and sustainable method for preserving perishable fruits, offering a cost-effective and efficient alternative to petroleum-based packaging materials.

Recoverable and degradable carboxymethyl chitosan polyelectrolyte hydrogel film for ultra stable encapsulation of curcumin.

Hydrogels have shown great potential for application in food science due to their diverse functionalities. However, most hydrogels inevitably contain toxic chemical cross-linking agent residues, posing serious food safety concerns. In this paper, a curcumin/sodium alginate/carboxymethyl chitosan hydrogels (CSCH) were prepared by self-assembly of two oppositely charged polysaccharides, carboxymethyl chitosan and sodium alginate, to form a three-dimensional network encapsulating curcumin for extending food shelf life. The network structure of the CSCH film confirmed by FTIR, XRD, and XPS was mainly formed by electrostatic interactions. The chemical stability of CSCH network encapsulated curcumin was 4.2 times greater than that of free curcumin, with excellent gas barrier, antimicrobial, antioxidant, and biosafety properties. It was found that CSCH films reduced dehydration, prevented nutrient loss, inhibited microbial growth, and lowered the respiration rate, which effectively maintained the quality of mango and prolonged its shelf-life up to 11 days. Notably, CSCH films possessed the properties of rapid recycling (10 mins) and biodegradability (53 days). This polysaccharide-based hydrogel film provides a viable strategy for the development of green and sustainable food packaging.

3D-Printed Fluorescent Hydrogel Consisting of Conjugated Polymer and Biomacromolecule for Fast and Sensitive Detection of Cr(VI) in Vegetables.

Portable fluorescent film sensors offer a solution to the contamination issue in homogeneous sensor detection systems. However, their special structure leads to low sensitivity and a long response time, resulting in a significant scientific challenge limiting their development and application. In this work, we propose a dual design strategy to prepare highly sensitive film sensors for rapidly detecting Cr2O72-. Specifically, P(Fmoc-Osu)-SA hydrogel films were developed by integrating the biological macromolecule sodium alginate (SA) with the conjugated polymer poly(N-(9-Fluorenylmethoxycarbonyloxy)succinimide) (P(Fmoc-Osu)), using both mold and inkjet 3D printing methods. The "molecular wire effect" of the sensing unit P(Fmoc-Osu) and the water channel within the film substrate are responsible for the improved sensitivity and the reduced response time of this thin film sensor. P(Fmoc-Osu)-SA hydrogel films prepared by these two methods can rapidly detect Cr2O72- with limits of detection of 1.18 and 0.078 nM, respectively. Considering that 3D-printed hydrogel films can be tailored to different shapes according to detection needs, the P(Fmoc-Osu)-SA hydrogel films produced from this method were effectively applied in vegetable samples. This study provides an innovative and effective strategy for the development of biocompatible hydrogel sensors that offer the potential for determining trace amounts of Cr2O72- in agriculture.

α-Mangostin hydrogel film with chitosan alginate base for recurrent aphthous stomatitis (RAS) treatment: study protocol for double-blind randomized controlled trial.

Background: Recurrent Aphthous Stomatitis (RAS) is a common ulcerative disease of the oral mucosa which is characterized by pain, and recurrent lesions in the oral cavity. This condition is quite painful, causing difficulty in eating, speaking and swallowing. Topical medications have been used for this condition, but the obstacle in using topical medications is the difficulty of achieving drug effects due to saliva wash out. This problem can be overcome by film hydrogel formulation which can protect the ulcer and reduce the pain to some extent. α-mangostin is a xanthone isolated from the rind of the mangosteen fruit. One of the activities of α-mangostin is anti-inflammatory effects, which operate through the characteristic mechanism of inhibiting the inflammatory response. This protocol study aims to investigate the efficacy of an α-mangostin hydrogel film with a chitosan alginate base for recurrent aphthous stomatitis (RAS) in comparison with a placebo over a period of 7 days. Study design: This is a two-arm, double blinding, randomized controlled trial enrolling patients with RAS. The efficacy test of α-mangostin Hydrogel Film will be tested against the placebo. Patients with RAS will be allocated randomly into the two arms and the hydrogel film will be administered for 7 days. The diameter of ulcer and visual analog scale (VAS) score will be used as the primary efficacy endpoint. The outcome measure will be compared between the two arms at the baseline, day 3, day 5, and at the end of 7 days. Discussion: The purpose of this clinical research is to provide scientific evidence on the efficacy of α-mangostin hydrogel film with a chitosan alginate basis in treating recurrent aphthous stomatitis. The trial is expected to improve our capacity to scientifically confirm the anti-inflammatory effectiveness of α-mangostin compounds in a final formulation that is ready to use. Trial registration: NCT06039774 (14 September 2023).

Unveiling the effect of molecular weight of vanillic acid grafted chitosan hydrogel films on physical, antioxidant, and antimicrobial properties for application in food packaging.

Till now, a wide range of chitosan (CHS)-based food packaging films have been developed. Yet, the role of molecular weight (MW), which is an important physical property of CHS, in determining the physicochemical and biochemical properties of vanillic acid (VA)-grafted CHS hydrogel films synthesized using CHS with different MWs has not been investigated until now. Three kinds of CHS including low, medium, and high MWs were grafted separately with VA through a carbodiimide mediated coupling reaction. No significant difference in water resistance properties was observed with increasing MW of CHS, in contrast to obvious decrease in light transmittance and opacity. The VA-g-CHS hydrogel films exhibited significantly improved light blocking capacity. A significant improvement in antioxidant (~6-fold) and antimicrobial (~1.2-fold) activity was observed after grafting with VA. In contrast, the free radical scavenging and antimicrobial activity decreased with increasing MW of CHS. Most importantly, VA-g-CHS hydrogel films could maintain the freshness of cherry tomatoes for up to 10 days at ~25 °C. However, no significant difference was observed depending on the MW value of CHS. This pioneering work is of great importance in guiding the selection of MW of CHS biomacromolecule to design hydrogel films with desired physicochemical and biochemical properties.

Fabrication and characterization of microwave-assisted synthesis of carbon dots crosslinked sodium alginate hydrogel films.

In this study, potassium-incorporated carbon dots (K-CDs) and nitrogen-incorporated carbon dots (N-CDs) were composted using the microwave-assisted method, in which the carbon source is citric acid. Subsequently, the prepared CDs were added into sodium alginate (NaAlg)/CaCO3 to form a hydrogel film. The Ca2+ in the system is tend to be released in the presence of acidic CDs to promote the cross-linking of NaAlg. This study presents a NaAlg hydrogel film preparation process that requires no additional acid and is natural and environmentally friendly. Moreover, it gives the NaAlg hydrogel film excellent antioxidant and antimicrobial properties and also improves its mechanical properties and gel strength. The release behaviors of the CDs in the hydrogel films were also explored. The prepared CD-incorporated NaAlg hydrogel films have potential applications in medical, biological engineering, food preservation, and other fields owing to their functional properties.

Waste to Wealth: Near-Infrared/pH Dual-Responsive Copper-Humic Acid Hydrogel Films for Bacteria-Infected Cutaneous Wound Healing.

The clinical applications of currently used photosensitizers are limited by high costs, inconvenient preparation, suboptimal biodegradability, and a lack of biological activity. Humic acids (HAs) show photothermal activity and can be used as a photosensitizer for photothermal therapy. In the presence of various functional groups, HAs are endowed with anti-inflammatory and antioxidant activities. The solubility of HAs is dependent on the pH value, which is soluble in neutral to alkaline conditions and undergoes a conformational change to a coiled and compact structure in acidic conditions. Additionally, Cu2+ is an emerging therapeutic agent for cutaneous wounds and can be chelated by HAs to form complexes. In this study, we explore the ability of HAs to modulate the inflammatory response, particularly macrophage polarization, and the potential underlying mechanism. We fabricate a near-infrared (NIR)/pH dual-responsive Cu-HAs nanoparticle (NP)-based poly(vinyl alcohol) (PVA) hydrogel film loaded with SEW2871 (SEW), a macrophage recruitment agent, to treat bacteria-infected cutaneous wounds. The results show that HAs could promote M2 macrophage polarization in a dose-dependent manner. The Cu-HAs NPs successfully eradicated bacterial infection through NIR-induced local hyperthermia. This PVA@Cu-HAs NPs@SEW hydrogel film improves tissue regeneration by promoting M2 macrophage polarization, alleviating oxidative stress, enhancing angiogenesis, and facilitating collagen deposition. These findings highlight the therapeutic potential of PVA@Cu-HAs NPs@SEW hydrogel film for the treatment of bacterially infected cutaneous wound healing.

A Transparent, Tough and Self-Healable Biopolymeric Composites Hydrogel for Open Wound Management.

Modern healthcare engineering requires a wound dressing solution supported by materials with outstanding features such as high biological compatibility, strong mechanical strength, and higher transparency with effective antibacterial properties. Here, we present a unique hydrogel technology consisting of two negatively charged biopolymers and a positively charged synthetic polymer. The interaction between charged polymers through hydrogen bonds has been created, which are revealed in the simulation by density functional theory and Fourier transform infrared spectra of individual polymers and the hydrogel film. The transparent hydrogel film dressings showed excellent stretchability, a higher water swelling ratio (60%), and strong mechanical strength (∼100 MPa) with self-healing abilities (85-90%). The fabricated hydrogel film showed stable blood clots (within 119 ± 15 s) with rapid hemostasis (<2%) properties and effective antibacterial studies against E. coli and S. aureus bacterial strains. In addition, the obtained hydrogel film also showed excellent cell viability on mouse fibroblast cells. With their enormous amenability to modification, these hydrogel films may serve as promising biomaterials for wound dressing applications.

Photocatalytic hydrogel film assisted forward osmosis (PFO) for water treatment: Sustainable performance and contaminant control.

The integration of catalytic oxidation with forward osmosis (FO) holds promising potential to address two crucial challenges encountered by FO: fouling and unsustainable performance, but suitable approaches are still rare. Herein, we have successfully developed a photocatalysis-assisted forward osmosis (PFO) system. In the PFO, a self-made porous carbon nitride doped functional carbon nanotube photocatalytic hydrogel film (PCN@CNTM) was engaged in the FO process in an inventive way by simply sticking to the commercial FO membrane surface, preventing damage to the membrane from the catalyst's direct insertion and delaying the assault from the oxidation groups. PFO allowed organic pollutants to decompose in the feed solution (90%) and on the membrane surface, regulating the water chemical potential and giving the FO membrane antifouling properties. This resulted in sustainable water flux (11.8 LMH) with no significant membrane fouling in PFO, whereas in FO alone there was a significant fouling and flux drop (from 12.73 to 7.23 LMH in 4 h). Moreover, the expensive FO membrane was protected while the hydrogel film can be replaced on demand. The PFO exemplifies the concept of synergistic technology integration, presenting a new perspective on harnessing the strengths of distinct technologies in a mutually beneficial manner.

Microfluidic-Based Continuous Fabrication of Ultrathin Hydrogel Films with Controllable Thickness.

Ultrathin hydrogel films composed of cross-linked polymer networks swollen by water, with soft and moisturized features similar to biological tissue, play a vital role in flexible biosensors and wearable electronics. However, achieving efficient and continuous fabrication of such films remains a challenge. Here, we present a microfluidic-based strategy for the continuous fabrication of free-standing ultrathin hydrogel films by using laminar flow, which can be precisely controlled in the micrometer scale. Compared with conventional methods, the microfluidic-based method shows advantages in producing hydrogel films with a high homogeneity as well as maintaining the structural integrity, without the need of supporting substrates and sophisticated equipment. This strategy allows the precise control over the thickness of the hydrogel films ranging from 15 ± 0.2 to 39 ± 0.5 µm, by adjusting the height of the microfluidic channels, with predictable opportunities for scaling up. Therefore, our strategy provides a facile route to produce advanced thin polymer films in a universal, steerable, and scalable manner and will promote the applications of thin polymer films in biosensors and wearable electronics.

Amikacin-Loaded Chitosan Hydrogel Film Cross-Linked with Folic Acid for Wound Healing Application.

PURPOSE: Numerous carbohydrate polymers are frequently used in wound-dressing films because they are highly effective materials for promoting successful wound healing. In this study, we prepared amikacin (AM)-containing hydrogel films through the cross-linking of chitosan (CS) with folic acid along with methacrylic acid (MA), ammonium peroxodisulfate (APS), and methylenebisacrylamide (MBA). In the current studies, an effort has been made to look at the possibilities of these materials in developing new hydrogel film wound dressings meant for a slow release of the antibiotic AM and to enhance the potential for wound healing. METHODS: Free-radical polymerization was used to generate the hydrogel film, and different concentrations of the CS polymer were used. Measurements were taken of the film thickness, weight fluctuation, folding resistance, moisture content, and moisture uptake. HPLC, FTIR, SEM, DSC, and AFM analyses were some of the different techniques used to confirm that the films were successfully developed. RESULTS: The AM release profile demonstrated regulated release over a period of 24 h in simulated wound media at pH 5.5 and 7.4, with a low initial burst release. The antibacterial activity against gram-negative bacterial strains exhibited substantial effectiveness, with inhibitory zones measuring approximately 20.5 ± 0.1 mm. Additionally, in vitro cytocompatibility assessments demonstrated remarkable cell viability, surpassing 80%, specifically when evaluated against human skin fibroblast (HFF-1) cells. CONCLUSIONS: The exciting findings of this study indicate the promising potential for further development and testing of these hydrogel films, offering effective and controlled antibiotic release to enhance the process of wound healing.

Ulvan/Silver nanoparticle hydrogel films for burn wound dressing.

Ulvan is a polysaccharide from green algae that shows good hydrogel film dressing characteristics. Silver nanoparticles (AgNP) can be incorporated into the hydrogel film to improve antibacterial properties and provide a potential burn treatment. In this study, we developed a novel hydrogel film wound dressing composed of ulvan and silver nanoparticles. Two concentrations (0.5 mM and 1 mM) of silver nitrate were used to produce ulvan-silver nanoparticles hydrogel film (UHF-AgNP0.5 and UHF-AgNP1), respectively. The physicochemical characteristics of the hydrogel films were evaluated, including particle size, zeta potential, Fourier transform infrared (FTIR), X-ray diffractometry (XRD), scanning electron microscope and energy-dispersive X-ray (SEM-EDX). Furthermore, the in vitro antimicrobial activity, and second-degree burn wound healing test were evaluated. The UHF-AgNP0.5 showed the highest antimicrobial activity compared to UHF-AgNP1 and UHF film. Meanwhile, an in vivo study using Wistar rats induced second-degree burns showed that UHF-AgNP0.5 significantly accelerated the healing process by regulating the inflammatory process, increasing re-epithelialization, and improving the vascularization process. Ulvan-silver nanoparticle hydrogel films have the ability to accelerate the healing of second-degree burns and are potential candidates for wound dressings.

Rational design of antimicrobial peptide conjugated graphene-silver nanoparticle loaded chitosan wound dressing.

Wound dressing with poor antibacterial properties, the tendency to adhere to the wound site, poor mechanical strength, and lack of porosity and flexibility are the major cause of blood loss, delayed wound repair, and sometimes causes death during the trauma or injury. In such cases, hydrogel-based antibacterial wound dressing would be a boon to the existing dressing as the moist environment will maintain the cooling temperate and proper exchange of atmosphere around the wound. In the present study, the multifunctional graphene with silver and ε-Poly-l-lysine reinforced into the chitosan matrix (CGAPL) was prepared as a nanobiocomposite wound dressing. The contact angle measurement depicted the hydrophilic property of CGAPL nanobiocomposite dressing (water contact angle 42°), while the mechanical property was 78.9 MPa. The antibacterial and cell infiltration study showed the antimicrobial property of CGAPL nanobiocomposite wound dressing. It also demonstrated no cytotoxicity to the L929 fibroblast cells. Chorioallantoic Membrane (CAM) assay showed the pro-angiogenic potential of CGAPL nanobiocomposite wound dressing. In-vitro scratch wound assay confirmed the migration of cells and increased cell adhesion and proliferation within 18 h of culture on the surface of CGAPL nanobiocomposite dressing. Later, the in-vivo study in the Wistar rat model showed that CGAPL nanobiocomposite dressing significantly enhanced the wound healing process as compared to the commercially available wound dressing Tegaderm (p-value <0.01) and Fibroheal@Ag (p-value <0.005) and obtained complete wound closure in 14 days. Histology study further confirmed the complete healing process, re-epithelization, and thick epidermis tissue formation. The proposed CGAPL nanobiocomposite wound dressing thus offers a novel wound dressing material with an efficient and faster wound healing property.

Novel Synergistic Approach: Tazarotene-Calcipotriol-Loaded-PVA/PVP-Nanofibers Incorporated in Hydrogel Film for Management and Treatment of Psoriasis.

Psoriasis is an autoimmune skin disease that generally affects 1%-3% of the total population globally. Effective treatment of psoriasis is limited because of numerous factors, such as ineffective drug delivery and efficacy following conventional pharmaceutical treatments. Nanofibers are widely being used as nanocarriers for effective treatment because of their multifunctional and distinctive properties, including a greater surface area, higher volume ratio, increased elasticity and improved stiffness and resistance to traction, favorable biodegradability, high permeability, and sufficient oxygen supply, which help maintain the moisture content of the skin and improve the bioavailability of the drugs. Similar to the extracellular matrix, nanofibers have a regeneration capacity, promoting cell growth, adhesion, and proliferation, and also have a more controlled release pattern compared with that of other conventional therapies at the psoriatic site. To ensure improved drug targeting and better antipsoriatic efficacy, this study formulated and evaluated a tazarotene (TZT)-calcipotriol (CPT)-loaded nanofiber and carbopol-based hydrogel film. The nanofiber was prepared using electrospinning with a polyvinyl alcohol/polyvinylpyrrolidone (PVA/PVP) K-90 polymeric blend that was later incorporated into a carbopol base to form hydrogel films. The prepared nanofibers were biochemically evaluated and in vitro and in vivo characterized. The mean diameters of the optimized formulation, i.e., TZT-loaded polyvinyl alcohol/polyvinylpyrrolidone nanofiber (TZT-PVA/PVP-NF) and TZT-CPT-loaded polyvinyl alcohol/polyvinylpyrrolidone nanofiber (TZT-CPT-PVA/PVP-NF) were 244.67 ± 58.11 and 252.31 ± 35.50 nm, respectively, as determined by scanning electron microscopy, and their tensile strength ranged from 14.02 ± 0.54 to 22.50 ± 0.03 MPa. X-ray diffraction revealed an increase in the amorphous nature of the nanofibers. The biodegradability studies of prepared nanofiber formulations, irrespective of their composition, showed that these completely biodegraded within 2 weeks of their application. The TZT-CPT-PVA/PVP-NF nanofibers exhibited 95.68% ± 0.03% drug release at the end of 72 h, indicating a controlled release pattern and following Higuchi release kinetics as a best-fit model. MTT assay, antioxidant and lipid profile tests, splenomegaly assessment, and weight fluctuation were all performed in the in vitro as well as in vivo studies. We found that the TZT-CPT-PVA/PVP-NF-based hydrogel film has high potential for antipsoriatic activity in imiquimod-induced Wistar rats in comparison with that of TT-PVA/PVP-NF nanofibers.