Detection of factor XIII inhibitors in 33 patients with autoimmune factor XIII deficiency in Japan.

Autoimmune factor XIII (FXIII) deficiency (AiF13D) is a rare hemorrhagic disease. The anti-FXIII autoantibodies that cause this disease are classified into three types: type Aa inhibits the heterotetramer assembly and activation of FXIII, type Ab inhibits the enzymatic activity of activated FXIII, and type B enhances the elimination of FXIII from the blood. The former two are FXIII inhibitors and may be lethal if overlooked by conventional functional assays. To reliably detect both types of FXIII inhibitors, a new assay was developed by incorporating 5-(biotinamido)pentylamine (BAPA) into α2-plasmin inhibitor (PI-BAPA assay). This assay was tested on plasma samples from 128 participants, including 60 healthy controls, 35 patients with non-immune acquired FXIII deficiency, and 33 patients with AiF13D (29 with type Aa inhibitors and 4 with type Ab inhibitors). The PI-BAPA assay successfully detected type Aa and Ab inhibitors in 5-step dilution cross-mixing tests between patient and normal plasma. This assay also showed comparable or superior inhibition rates in the 1:1 mixing test compared to conventional ammonia release and amine incorporation assays. Receiver operating characteristic curve analysis confirmed the excellent specificity and sensitivity of this assay for determining inhibition rates, and the assay has already been used for AiF13D diagnosis.

Rapid Mass Conversion for Environmental Microplastics of Diverse Shapes.

Rivers have been recognized as the primary conveyors of microplastics to the oceans, and seaward transport flux of riverine microplastics is an issue of global attention. However, there is a significant discrepancy in how microplastic concentration is expressed in field occurrence investigations (number concentration) and in mass flux (mass concentration). Of urgent need is to establish efficient conversion models to correlate these two important paradigms. Here, we first established an abundant environmental microplastic dataset and then employed a deep neural residual network (ResNet50) to successfully separate microplastics into fiber, fragment, and pellet shapes with 92.67% accuracy. We also used the circularity (C) parameter to represent the surface shape alteration of pellet-shaped microplastics, which always have a more uneven surface than other shapes. Furthermore, we added thickness information to two-dimensional images, which has been ignored by most prior research because labor-intensive processes were required. Eventually, a set of accurate models for microplastic mass conversion was developed, with absolute estimation errors of 7.1, 3.1, 0.2, and 0.9% for pellet (0.50 ≤ C < 0.75), pellet (0.75 ≤ C ≤ 1.00), fiber, and fragment microplastics, respectively; environmental samples have validated that this set is significantly faster (saves ∼2 h/100 MPs) and less biased (7-fold lower estimation errors) compared to previous empirical models.

Lytic transglycosylase Slt of Pseudomonas aeruginosa as a periplasmic hub protein.

Peptidoglycan is a major constituent of the bacterial cell wall. Its integrity as a polymeric edifice is critical for bacterial survival and, as such, it is a preeminent target for antibiotics. The peptidoglycan is a dynamic crosslinked polymer that undergoes constant biosynthesis and turnover. The soluble lytic transglycosylase (Slt) of Pseudomonas aeruginosa is a periplasmic enzyme involved in this dynamic turnover. Using amber-codon-suppression methodology in live bacteria, we incorporated a fluorescent chromophore into the structure of Slt. Fluorescent microscopy shows that Slt populates the length of the periplasmic space and concentrates at the sites of septation in daughter cells. This concentration persists after separation of the cells. Amber-codon-suppression methodology was also used to incorporate a photoaffinity amino acid for the capture of partner proteins. Mass-spectrometry-based proteomics identified 12 partners for Slt in vivo. These proteomics experiments were complemented with in vitro pulldown analyses. Twenty additional partners were identified. We cloned the genes and purified to homogeneity 22 identified partners. Biophysical characterization confirmed all as bona fide Slt binders. The identities of the protein partners of Slt span disparate periplasmic protein families, inclusive of several proteins known to be present in the divisome. Notable periplasmic partners (KD < 0.5 µM) include PBPs (PBP1a, KD = 0.07 µM; PBP5 = 0.4 µM); other lytic transglycosylases (SltB2, KD = 0.09 µM; RlpA, KD = 0.4 µM); a type VI secretion system effector (Tse5, KD = 0.3 µM); and a regulatory protease for alginate biosynthesis (AlgO, KD < 0.4 µM). In light of the functional breadth of its interactome, Slt is conceptualized as a hub protein within the periplasm.

Preparation and Characterization of Chitosan/Hydroxypropyl Methylcellulose Temperature-Sensitive Hydrogel Containing Inorganic Salts for Forest Fire Suppression.

Effective forest fire suppression remains a critical challenge, necessitating innovative solutions. Temperature-sensitive hydrogels represent a promising avenue in this endeavor. Traditional firefighting methods often struggle to address forest fires efficiently while mitigating ecological harm and optimizing resource utilization. In this study, a novel intelligent temperature-sensitive hydrogel was prepared specially for forest fire extinguishment. Utilizing a one-pot synthesis approach, this material demonstrates exceptional fluidity at ambient temperatures, facilitating convenient application and transport. Upon exposure to elevated temperatures, it undergoes a phase transition to form a solid, barrier-like structure essential for containing forest fires. The incorporation of environmentally friendly phosphorus salts into the chitosan/hydroxypropyl methylcellulose gel system enhances the formation of temperature-sensitive hydrogels, thereby enhancing their structural integrity and firefighting efficacy. Morphological and thermal stability analyses elucidate the outstanding performance, with the hydrogel forming a dense carbonized layer that acts as a robust barrier against the spread of forest fires. Additionally, comprehensive evaluations employing rheological tests, cone calorimeter tests, a swelling test, and infrared thermography reveal the multifaceted roles of temperature-sensitive hydrogels in forest fire prevention and suppression strategies.

Co-removal and recycling of Ba2+ and Ca2+ in hypersaline wastewater based on the microbially induced carbonate precipitation technique: Overlooked Ba2+ in extracellular and intracellular vaterite.

This study investigates the co-precipitation of calcium and barium ions in hypersaline wastewater under the action of Bacillus licheniformis using microbially induced carbonate precipitation (MICP) technology, as well as the bactericidal properties of the biomineralized product vaterite. The changes in carbonic anhydrase activity, pH, carbonate and bicarbonate concentrations in different biomineralization systems were negatively correlated with variations in metal ion concentrations, while the changes in polysaccharides and protein contents in bacterial extracellular polymers were positively correlated with variations in barium concentrations. In the mixed calcium and barium systems, the harvested minerals were vaterite containing barium. The increasing concentrations of calcium promoted the incorporation and adsorption of barium onto vaterite. The presence of barium significantly increased the contents of O-CO, N-CO, and Ba-O in vaterite. Calcium promoted barium precipitation, but barium inhibited calcium precipitation. After being treated by immobilized bacteria, the concentrations of calcium and barium ions decreased from 400 and 274 to 1.72 and 0 mg/L (GB/T15454-2009 and GB8978-1996). Intracellular minerals were also vaterite containing barium. Extracellular vaterite exhibited bactericidal properties. This research presents a promising technique for simultaneously removing and recycling hazardous heavy metals and calcium in hypersaline wastewater.

Effects of straw management and N levels on gross nitrogen transformations in fluvo-aquic soil of the North China Plain.

Straw incorporation with nitrogen (N) fertilization is crucial for enhancing soil fertility and minimizing negative environmental impacts by altering the magnitude and direction of soil N transformation processes. However, the response of soil N transformations to long-term carbon (C) and N inputs, and their primary driving factors, remain poorly understood. Thus, a 15N tracing study was conducted to investigate the effects of straw incorporation (AS) and straw removal (NS) with N levels of 0, 150 and 250 kg N ha-1 per season (N0, N150 and N250) on gross N transformation rates in the North China Plain after 6-year trial. Results indicated that at N0, AS significantly increased soil microbial immobilization of nitrate (NO3--N, INO3) and autotrophic nitrification rates (ONH4) compared to NS. With N fertilization, AS increased gross N immobilization (Itotal), ammonium-N immobilization (NH4+-N, INH4), net NH4+-N immobilization (InetNH4) and net NH4+-N absorption rates (AnetNH4). Specifically, at N150, AS significantly increased recalcitrant organic N mineralization rate (MNrec), while significantly reducing ONH4, labile organic N mineralization (MNlab), and gross N mineralization rates (Mtotal). At N250, AnetNH4, MNlab, MNrec and ONH4 under AS were significantly higher than under NS. Nitrogen application significantly increased ONH4, Itotal and INO3 under two straw management practices, and enhanced INH4 and InetNH4 under AS. Compared to N250, N150 significantly increased INH4 and InetNH4 under AS, while decreasing Mtotal. Opposite results were observed under NS. Meanwhile, NO3--N and dissolved organic carbon (DOC) were master factors controlling immobilization, total nitrogen (TN), hydrolysable NH4+-N (HNN) and stable organic N significantly affected AnetNH4, while labile organic N were the key environmental factors affecting MNrec, all of which positively influenced the rates of assimilation, mineralization and clay mineral adsorption. Overall, this study provides new insights into reducing N fertilization under straw incorporation by quantifying soil N transformation processes.

Travelling in Microphis (Teleostei: Syngnathidae) Otoliths with Two-Dimensional X-ray Fluorescence Maps: Twists and Turns on the Road to Strontium Incorporation.

Indo-Pacific tropical island streams are home to freshwater pipefish (Microphis spp., Syngnathidae). Otoliths were used to uncover life history traits in four species, including a New Caledonian endemic. All four species present the same methodological challenge: their otoliths are small, fragile and mute for growth marks using basic observation tools. Strontium (Sr) is calcium substituent in the mineral lattice, driven by salinity conditions, and thus useful to study diadromous migrations. Synchrotron-based scanning X-ray fluorescence 2D high-resolution mapping allowed us to tackle the global and hyperfine strontium (Sr) distribution. We developed analytical imaging processes to retrieve biological information from otoliths from the data generated via synchrotron analysis. We uncovered plasticity in the life cycle: all species were amphidromous, apart from some freshwater residents from New Caledonia. Understanding life cycle modalities is crucial to categorize species distribution limits and to implement adapted conservation measures, especially when endemic species are at stake. 2D fine-scale images outlined the heterogeneity of Sr distribution: in addition to the trivial Sr incorporation driven by environmental ionic conditions, there is an unusual mosaic arrangement of Sr distribution and we hypothesize that biological control, especially growth during the early life stages, may sometimes overrule stoichiometry. This shows that it is worth studying otolith formation and element integration at imbricated scales, and our methods and results provide a strong basis for future works and prospects in otolith science.

Calcium isotope fractionation during weathering of argillaceous carbonates in a humid climate.

The continental weathering is a key process that controls calcium (Ca) transportation from the continental crust to the waters. To elucidate the behavior of Ca isotopes during carbonate weathering, the concentrations and δ44/40Ca (relative to NIST SRM 915a) of bulk saprolites, exchangeable, acid-leachable and residual phases of a weathering profile developed on the marine carbonates, Guangdong province, South China, were investigated. Upwards the profile, δ44/40Ca values of the bulk saprolites systematically decrease from 0.77 ± 0.12 ‰ to -0.44 ± 0.12 ‰, suggesting that significant Ca isotope fractionation occurred during chemical weathering. The exchangeable fractions have δ44/40Ca values higher than those of the bulk saprolites with Δ44/40Caexchangeable-saprolite varying from -0.01 ‰ to 0.73 ‰, suggesting that heavy isotopes are preferentially adsorbed onto the clays. The acid-leachable phases display a relatively narrow δ44/40Ca range from 0.52 ‰ to 0.74 ‰ with Ca fractions varying from 7.4 % to 100.3 %, potentially indicating that limited Ca isotopic fractionation occurs during the dissolution of primary carbonates. The residual Ca pool is strongly fractionated with δ44/40Ca ranging from 0.64 ± 0.08 ‰ to -0.98 ± 0.02 ‰, systematically lower than their bulk saprolites, perhaps indicating light Ca isotopes are preferentially incorporated into the clay lattices. Altogether, it seems that the Ca isotopic fractionation directions are opposite between clay structural incorporation and adsorption. Our study provides important insight of Ca behavior and Ca isotopic fractionation during chemical weathering, which is critical to shape Ca isotopic compositions of the upper continental crust and trace the global biogeochemical cycle of Ca.

Lateral extra-articular tenodesis does not enhance ACL graft healing, however, does reduce graft tunnel widening.

PURPOSE: The study hypothesized that the addition of lateral extra-articular tenodesis (LEAT) in anterior cruciate ligament reconstruction (ACLR) had a significant effect on ACL graft healing. METHODS: A total of 80 patients were divided into two cohorts matched for gender, age, body mass index, time from surgery to post-operative MRI and graft diameter. Forty patients underwent ACL reconstruction alone, while 40 underwent ACLR in addition to LEAT. Patients underwent a magnetic resonance imaging scan at 12 months post-surgery; tunnel apertures were measured using multiplanar reformation, graft healing was assessed using signal-to-noise quotient (SNQ) in three regions of interest and finally graft maturity and integration were classified using the Howell and Ge scale, respectively. In addition, clinical evaluation and patient-reported outcome measures were collected. RESULTS: The mean femoral tunnel widening at 12 months post-surgery was 39.8 ± 14.0% in the ACLR + LEAT group and 55.2 ± 12.7% in the ACLR alone group (p < 0.05). The mean tibial tunnel widening was 29.3 ± 12.7% in the ACLR + LEAT group and 44.4 ± 12.1% in the ACLR group (p < 0.05). The mean adjusted graft SNQ was 9.0 ± 14.9 in the ACLR + LEAT group and 9.5 ± 11.4 in the ACLR group (n.s.). CONCLUSION: At 1 year post-operatively, we noted significantly less femoral and tibial tunnel widening in the ACLR + LEAT group. LEAT did not result in a statistically significant effect on graft healing. LEVEL OF EVIDENCE: Level III.

Decorating the Node of a Zirconium-Based Metal-Organic Framework to Tune Adsorption Behavior and Surface Permeation.

Surface barriers are commonly observed in nanoporous materials. Although researchers have explored methods to repair defects or create flawless crystals to mitigate surface barriers, these approaches may not always be practical or readily achievable in targeted metal-organic frameworks (MOFs). In our study, we propose an alternative approach focusing on the introduction of diverse ligands onto a MOF-808 node to finely adjust its adsorption and mass transport characteristics. Significantly, our findings indicate that while adsorption curves can be inferred based on the MOF's chemical composition and the probing molecule, surface permeabilities exhibit variations dependent on the specific probe utilized and the incorporated ligand. Our investigation, considering van der Waals forces exclusively between the adsorbate (e.g., n-hexane, propane, and benzene) and the adsorbent, revealed that augmenting these interactions can indeed improve surface permeation to a certain extent. Conversely, strong adsorption resulting from hydrogen bonding interactions, particularly with water in modified MOFs, led to compromised permeation within the MOF crystals. These outcomes provide valuable insights for the porous materials community and offer guidance in the development of adsorbents with enhanced affinity and superior mass transport properties for gases and vapors.

Doped SnO2thin films fabricated at low temperature by atomic layer deposition with a precise incorporation of niobium atoms.

Nb-doped SnO2(NTO) thin films were synthesized by atomic layer deposition technique at low temperature (100 °C). For an efficient incorporation of the Nb atoms, i.e. fine control of their amount and distribution, various supercycle ratios and precursor pulse sequences were explored. The thin film growth process studied byin-situQCM revealed that the Nb incorporation is highly impacted by the surface nature as well as the amount of species available at the surface. This was confirmed by the actual concentration of the Nb atom incorporated inside the thin film as determined by XPS. Highly transparent thin films which transmit more than 95% of the AM1.5 global solar irradiance over a wide spectral range (300-1000 nm) were obtained. In addition, the Nb atoms influenced the optical band gap, conduction band, and valence band levels. While SnO2thin film were too resistive, films tuned to conductive nature upon Nb incorporation with controlled concentration. Optimal incorporation level was found to be ⩽1 at.% of Nb, and carrier concentration reached up 2.5 × 1018cm-3for the as-deposited thin films. As a result, the high optical transparency accompanied with tuned electrical property of NTO thin films fabricated by ALD at low temperature paves the way for their integration into temperature-sensitive, nanostructured optoelectrical devices.

Incorporation of Anions into Anodic Alumina-A New Track in Cr(VI) Anodizing Substitution?

Aluminum technical alloys are well known for their outstanding mechanical properties, especially after heat treatment. However, quenching and aging, which improve the mechanical properties, by the formation of Cu-rich zones and phases that are coherent with the matrix and block the dislocation motion, cause uneven distribution of the elements in the alloy and consequently make it prone to corrosion. One method providing satisfactory corrosion protection of aluminum alloys is anodizing. On an industrial scale, it is usually carried out in electrolytes containing chromates that were found to be cancerogenic and toxic. Therefore, much effort has been undertaken to find substitutions. Currently, there are many Cr(VI)-free substitutes like tartaric-sulfuric acid anodizing or citric-sulfuric acid anodizing. Despite using such approaches even on the industrial scale, Cr(VI)-based anodizing still seems to be superior; therefore, there is an urge to find more complex but more effective approaches in anodizing. The incorporation of anions into anodic alumina from the electrolytes is a commonly known effect. Researchers used this phenomenon to entrap various other anions and organic compounds into anodic alumina to change their properties. In this review paper, the impact of the incorporation of various corrosion inhibitors into anodic alumina on the corrosion performance of the alloys is discussed. It is shown that Mo compounds are promising, especially when combined with organic acids.

A Review of Methods to Modify the PDMS Surface Wettability and Their Applications.

Polydimethylsiloxane (PDMS) has attracted great attention in various fields due to its excellent properties, but its inherent hydrophobicity presents challenges in many applications that require controlled wettability. The purpose of this review is to provide a comprehensive overview of some key strategies for modifying the wettability of PDMS surfaces by providing the main traditional methods for this modification and the results of altering the contact angle and other characteristics associated with this property. Four main technologies are discussed, namely, oxygen plasma treatment, surfactant addition, UV-ozone treatment, and the incorporation of nanomaterials, as these traditional methods are commonly selected due to the greater availability of information, their lower complexity compared to the new techniques, and the lower cost associated with them. Oxygen plasma treatment is a widely used method for improving the hydrophilicity of PDMS surfaces by introducing polar functional groups through oxidation reactions. The addition of surfactants provides a versatile method for altering the wettability of PDMS, where the selection and concentration of the surfactant play an important role in achieving the desired surface properties. UV-ozone treatment is an effective method for increasing the surface energy of PDMS, inducing oxidation, and generating hydrophilic functional groups. Furthermore, the incorporation of nanomaterials into PDMS matrices represents a promising route for modifying wettability, providing adjustable surface properties through controlled dispersion and interfacial interactions. The synergistic effect of nanomaterials, such as nanoparticles and nanotubes, helps to improve wetting behaviour and surface energy. The present review discusses recent advances of each technique and highlights their underlying mechanisms, advantages, and limitations. Additionally, promising trends and future prospects for surface modification of PDMS are discussed, and the importance of tailoring wettability for applications ranging from microfluidics to biomedical devices is highlighted. Traditional methods are often chosen to modify the wettability of the PDMS surface because they have more information available in the literature, are less complex than new techniques, and are also less expensive.

The interplay of soil physicochemical properties, methanogenic diversity, and abundance governs methane production potential in paddy soil subjected to multi-decadal straw incorporation.

Straw incorporation holds significant promise for enhancing soil fertility and mitigating air pollution stemming from straw burning. However, this practice concurrently elevates the production and emission of methane (CH4) from paddy ecosystems. Despite its environmental impact, the precise mechanisms behind the heightened CH4 production resulting from long-term straw incorporation remain elusive. In a 32-year field experiment featuring three fertilization treatments (CFS-chemical fertilizer with wheat straw, CF-chemical fertilizer, and CK-unamended), we investigated the impact of abiotic (soil physicochemical properties) and biotic (methanogenic abundance, diversity, and community composition) factors on CH4 production in paddy fields. Results revealed a significantly higher CH4 production potential under CFS treatment compared to CF and CK treatments. The partial least squares path model revealed that soil physicochemical properties (path coefficient = 0.61), methanogenic diversity (path coefficient = -0.43), and methanogenic abundance (path coefficient = 0.29) collectively determined CH4 production potential, explaining 77% of the variance. Enhanced soil organic carbon content and water content, resulting from straw incorporation, emerged as pivotal factors positively correlated with CH4 production potential. Under CFS treatment, lower Shannon index of methanogens, compared to CF and CK treatments, was attributed to increased Methanosarcina. Notably, the Shannon index and relative abundance of Methanosarcina exhibited negative and positive correlations with CH4 production potential, respectively. Methanogenic abundance, bolstered by straw incorporation, significantly amplified overall potential. This comprehensive analysis underscores the joint influence of abiotic and biotic factors in regulating CH4 production potential during multi-decadal straw incorporation.

Two-stage injection of polymer and microsand during ballasted flocculation for treating kaolin waters with or without humic acid: Floc evolutional characteristics, performance and mechanisms.

Ballasted flocculation is regarded as a most promising water treatment technology in aspects of retrofit and high-rate applications. To deep understand the incorporation behaviors of ballasting agent into ballasted floc growth, two distinct injection modes (namely a two-stage injection of polyacrylamide (PAM) alone, and a two-stage injection of both PAM and microsand) were developed in this study. Then, ballasted flocculation tests of kaolin and kaolin-HA (humic acid) waters were conducted at varying split ratios for fixed total dosages of both PAM and microsand. The experimental results showed that for either two-stage injection mode, the higher the second percentage of each split ratio, the greater the average size of maturated flocs at the second sub-stage of maturation. Meanwhile, the turbidity and UV254 values of settled water became lower at 30 and 180 s of sedimentation, suggesting that varying split ratios significantly affected the kinetics of ballasted floc growth. Moreover, it was suggested that the selection of either two-stage injection mode or corresponding split ratios played a more pronounced role in the HA removal than the total dosage of PAM. This suggestion was supported by SEM, FTIR and XPS analyses for surface morphological details, functional groups and chemical states of maturated flocs eventually formed in the kaolin-HA water through both two-stage injection modes. Accordingly, newly-established conceptual models of ballasted floc growth were proposed to explore the potential influencing mechanisms of varying split ratios on the ballasted flocculation performance. At each sub-stage of maturation, an appropriate dosage ratio between PAM and microsand was of great importance to effectively incorporate microsand particles into ballasted floc formation, besides the hydrolyzed produces of AS coagulant formed at the coagulation stage of ballasted flocculation. This study is expected to provide valuable insights for making ballasted flocculation more effective, economical and sustainable in water treatment engineering.

PAU Smart Seeder: a novel way forward for rice residue management in North-west India.

In winter, the paddy residues become wet during morning and late evening due to dew, which restricts the operation of sowing machines (Happy Seeder and Super Seeder) into paddy residues, as wet residues do not slide on furrow openers/tines. A PAU Smart Seeder (PSS) was developed and evaluated for a four-wheel tractor that can sow wheat with optimum crop establishment in combined harvested rice fields. The PSS were evaluated for its performance under varying straw load, forward speed, and rotor speed in terms of fuel consumption, field capacity, seed emergence, and grain yield. The crop establishment and wheat yield of PSS was also compared with the existing straw management machines Happy Seeder (HS) and Super Seeder (SS) under heavy paddy residue conditions. The effect of the straw load was more pronounced on dependent variables than the effect of the speed index. PSS performance was best at a forward speed of 2.6 km h-1, rotor speed of 127.5 rpm, and a straw load of 6 t ha-1. Average fuel consumption using PSS was lower than SS but higher than HS. Wheat emergence was higher by 15.6 and 25.7% on the PSS plots compared to HS and SS, respectively. Average wheat grain yield in PSS plots was significantly higher by 12.7 and 18.9% than SS and HS, respectively in one experiment, while the grain yield was similar for both PSS and HS in other experiments. PSS has a novel mechanism to manage paddy straw and simultaneously sow wheat into a heavy straw load (> 8 t ha-1) mixture of anchored and loose straw. In conclusion, PSS showed promise for in-situ management of rice straw as it eliminates most of the operational problems encountered by the existing seeders (HS and SS).

Long-Term Straw Incorporation under Controlled Irrigation Improves Soil Quality of Paddy Field and Rice Yield in Northeast China.

Soil quality is an indicator of the ability to ensure ecological security and sustainable soil usage. The effects of long-term straw incorporation and different irrigation regimes on the yield and soil quality of paddy fields in cold regions remain unclear. This study established four treatments: controlled irrigation + continuous straw incorporation for 3 years (C3), controlled irrigation + continuous straw incorporation for 7 years (C7), flooded irrigation + continuous straw incorporation for 3 years (F3), and flooded irrigation + continuous straw incorporation for 7 years (F7). Analysis was conducted on the impact of various irrigation regimes and straw incorporation years on the physicochemical characteristics and quality of the soil. The soil quality index (SQI) for rice fields was computed using separate datasets for each treatment. The soil nitrate nitrogen, available phosphorus, soil organic carbon, and soil organic matter contents of the C7 were 93.51%, 5.80%, 8.90%, and 8.26% higher compared to C3, respectively. In addition, the yield of the C7 treatment was 5.18%, 4.89%, and 10.32% higher than those of F3, C3, and F7, respectively. The validity of the minimum data set (MDS) was verified by correlation, Ef and ER, which indicated that the MDS of all treatments were able to provide a valid evaluation of soil quality. The MDS based SQI of C7 was 11.05%, 11.97%, and 27.71% higher than that of F3, C3, and F7, respectively. Overall, long-term straw incorporation combined with controlled irrigation increases yield and soil quality in paddy fields in cold regions. This study provides a thorough assessment of soil quality concerning irrigation regimes and straw incorporation years to preserve food security and the sustainability of agricultural output. Additionally, it offers a basis for soil quality diagnosis of paddy fields in the Northeast China.

Reduced Levels of Lagging Strand Polymerases Shape Stem Cell Chromatin.

Stem cells display asymmetric histone inheritance while non-stem progenitor cells exhibit symmetric patterns in the Drosophila male germline lineage. Here, we report that components involved in lagging strand synthesis, such as DNA polymerase α and δ (Polα and Polδ), have significantly reduced levels in stem cells compared to progenitor cells. Compromising Polα genetically induces the replication-coupled histone incorporation pattern in progenitor cells to be indistinguishable from that in stem cells, which can be recapitulated using a Polα inhibitor in a concentration-dependent manner. Furthermore, stem cell-derived chromatin fibers display a higher degree of old histone recycling by the leading strand compared to progenitor cell-derived chromatin fibers. However, upon reducing Polα levels in progenitor cells, the chromatin fibers now display asymmetric old histone recycling just like GSC-derived fibers. The old versus new histone asymmetry is comparable between stem cells and progenitor cells at both S-phase and M-phase. Together, these results indicate that developmentally programmed expression of key DNA replication components is important to shape stem cell chromatin. Furthermore, manipulating one crucial DNA replication component can induce replication-coupled histone dynamics in non-stem cells in a manner similar to that in stem cells.

Harnessing precursor-directed biosynthesis with glucose derivatives to access cotton fibers with enhanced physical properties.

Cotton ovule in vitro cultures are a promising platform for exploring biofabrication of fibers with tailored properties. When the ovules' growth medium is supplemented with chemically synthesized cellulose precursors, it results in their integration into the developing fibers, thereby tailoring their end properties. Here, we report the feeding of synthetic glucosyl phosphate derivative, 6-deoxy-6-fluoro-glucose-1-phosphate (6F-Glc-1P) to cotton ovules growing in vitro, demonstrating the metabolic incorporation of 6F-Glc into the fibers with enhanced mechanical properties and moisture-retention capacity while emphasizing the role of molecular hierarchical architecture in defining functional characteristics and mechanical properties. This incorporation strategy bypasses the early steps of conventional metabolic pathways while broadening the range of functionalities that can be employed to customize fiber end properties. Our approach combines materials science, chemistry, and plant sciences to illustrate the innovation required to find alternative solutions for sustainable production of functional cotton fibers with enhanced and emergent properties.

Efficient incorporation of highly migratory thallium into struvite structure: Unraveling the stabilization mechanisms from a mineralogical perspective.

The remediation of high-concentration thallium (Tl+) contaminated wastewater is a critical environmental concern. Current research emphasizes the effectiveness of adsorption and oxidation methods for Tl+ treatment, yet challenges persist in enhancing their performance. This study explores the feasibility of emergency Tl+ wastewater treatment and elucidates the mechanisms of Tl+ incorporation into mineral structures, with a focus on the struvite mineral as a framework for Tl+ integration via NH4+ ion exchange. To assess the efficacy and mechanisms of Tl+ immobilization, we utilized comprehensive analytical techniques, including X-ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), Fourier-Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS), Thermogravimetric Analysis (TG), and Density Functional Theory (DFT) calculations. The findings reveal that struvite adsorbs Tl+ onto its surface, followed by an ion exchange process between monovalent cations (NH4+/K+) within the structure and Tl+. Ultimately, Tl+ is incorporated in the form of a (NH4,Tl)MgPO4 solid solution within the structure, achieving a remarkable maximum incorporation capacity of 320.56 mg/g, which significantly surpasses the capacity of typical adsorbents. The findings demonstrate significant Tl+ incorporation, validating the approach for emergency wastewater treatment and suggesting the potential of mineralogy in environmental remediation. This research contributes to advancing heavy metal wastewater treatment strategies, offering a foundation for further investigation.