Interplatform comparison between three ion mobility techniques for human plasma lipid collision cross sections.

The implementation of ion mobility spectrometry (IMS) in liquid chromatography-high-resolution mass spectrometry (LC-HRMS) workflows has become a valuable tool for improving compound annotation in metabolomics analyses by increasing peak capacity and by adding a new molecular descriptor, the collision cross section (CCS). Although some studies reported high repeatability and reproducibility of CCS determination and only few studies reported good interplatform agreement for small molecules, standardized protocols are still missing due to the lack of reference CCS values and reference materials. We present a comparison of CCS values of approximatively one hundred lipid species either commercially available or extracted from human plasma. We used three different commercial ion mobility technologies from different laboratories, drift tube IMS (DTIMS), travelling wave IMS (TWIMS) and trapped IMS (TIMS), to evaluate both instrument repeatability and interlaboratory reproducibility. We showed that CCS discrepancies of 0.3% (average) could occur depending on the data processing software tools. Moreover, eleven CCS calibrants were evaluated yielding mean RSD below 2% for eight calibrants, ESI Low concentration tuning mix (Tune Mix) showing the lowest RSD (< 0.5%) in both ion modes. Tune Mix calibrated CCS from the three different IMS instruments proved to be well correlated and highly reproducible (R2 > 0.995 and mean RSD ≤ 1%). More than 90% of the lipid CCS had deviations of less than 1%, demonstrating high comparability between techniques, and the possibility to use the CCS as molecular descriptor. We highlighted the need of standardized procedures for calibration, data acquisition, and data processing. This work demonstrates that using harmonized analytical conditions are required for interplatform reproducibility for CCS determination of human plasma lipids.

Observations from a national sample exchange program for molecular haematology testing.

External quality assessment programs (EQAP) for molecular haematology generally only assess the analytical phase of laboratory testing or provide limited evaluation of post-analytical components. We incorporated comprehensive post-analytical evaluation into an existing national inter-laboratory sample exchange program for molecular haematology due to the increasing complexity of diagnostic molecular testing and interpretation. We report key findings from four years of longitudinal data using this approach. Eighteen participating laboratories enrolled in an annual reciprocal sample exchange program from 2019-2022, which covered conventional and next-generation sequencing (NGS) assays. Participants submitted results on their laboratory information system-generated reports which then underwent central review. Reports were assessed according to consensus values and relevant national and international reporting standards and guidelines. A total of 680 reports were received. Laboratories had high concordance in the analytical phase of testing, with incorrect variant detection observed in a total of six of 680 (0.9%) reports. In contrast, post-analytical concordance was much lower, with at least one discordance observed in 28.9-57.6% of all conventional reports and 33.3-100% NGS reports. The most frequent post-analytical discordances were: (1) not including key technical information on reports (total 41.9% conventional, 47.2% NGS); (2) not using standard gene and variant nomenclature (total 28.2% conventional, 25.6% NGS). NGS reports also demonstrated discrepancies in variant classification (total 20.4%) and interpretation (total 10.2%). The rate of discrepancies generally improved year-on-year. Inter-laboratory concordance for molecular haematology testing is high in the analytical phase, however opportunities exist for improvement in the post-analytical phase. Given that result interpretation is crucial for clinical decision-making and that molecular testing is a complex and evolving field, we suggest that EQAPs should comprehensively evaluate both analytical and post-analytical components of laboratory performance in order to harmonise reporting and to support the accurate interpretation of molecular haematology tests.

LC-MS/MS analysis of erythrocyte phosphatidylethanol in haematocrit-corrected whole blood versus isolated erythrocytes: Results of an inter-laboratory comparison.

Phosphatidylethanol (PEth) is a non-oxidative metabolite of alcohol (ethanol), which is a sensitive and specific indicator of historic ethanol consumption. Although PEth production from ethanol is catalysed by the ubiquitous enzyme phospholipase D, it resides mainly within the erythrocyte compartment of the blood. PEth analysis has been reported in different preparations of whole blood, representing one of the barriers of inter-laboratory comparisons. We previously reported that expressing PEth concentrations in terms of blood erythrocyte content is more sensitive than whole blood volume, and haematocrit-corrected liquid whole blood calculations of erythrocyte PEth and isolated erythrocyte PEth concentrations are comparable when assayed under identical analytical conditions. Acceptance of a clinical diagnostic assay by accreditation bodies requires proficiency testing with a third-party analytical facility. To explore different blood preparations within the same inter-laboratory program, 60 matched isolated erythrocyte or liquid whole blood specimens were tested at three laboratories. Laboratories measured PEth by liquid chromatography-tandem mass spectrometry (LC-MS/MS), two using isolated erythrocytes, while the third used liquid whole blood, which underwent haematocrit correction before comparison with isolated erythrocyte PEth concentrations. There was acceptable consensus (87%) among laboratories to detect PEth around a cut-off of 35 µg/L of erythrocytes. Each laboratory correlated well with the group average PEth concentration (R > 0.98) for each specimen above the cut-off. Differences were observed between laboratories in bias, which did not affect comparable sensitivity at the selected cut-off. This work demonstrates the feasibility of an inter-laboratory comparison for erythrocyte PEth analysis across different LC-MS/MS methodologies and different blood preparations.

Inter-laboratory validation of liquid chromatography-tandem mass spectrometry multi-mycotoxin determination in animal feed - method transfer from the reference laboratory to regional laboratories.

Introduction: The results are presented of the inter-laboratory validation of a liquid chromatography-tandem mass spectrometry method for the determination of eight mycotoxins (aflatoxin B1, deoxynivalenol, fumonisin B1, fumonisin B2, ochratoxin A, toxin T-2, toxin HT-2 and zearalenone) in animal feeds. Material and Methods: This study was an essential part of the method's transfer from the National Reference Laboratory to six regional laboratories in Poland working in the official survey of mycotoxins in feed. The laboratories received a batch of standard solutions, blank samples and quality control materials on which to perform analysis with one procedure and different liquid chromatography-tandem mass spectrometry conditions. Results: The validation results show good precision (reproducibility coefficient of variation 3.7-20.5%) and accuracy of the method (recovery 89-120% and trueness 94-103%) and sufficient skills of the laboratory personnel. Conclusion: The study is an example of the successful transfer of the method among laboratories.

Transferability and reproducibility of exposed air-liquid interface co-culture lung models.

BACKGROUND: The establishment of reliable and robust in vitro models for hazard assessment, a prerequisite for moving away from animal testing, requires the evaluation of model transferability and reproducibility. Lung models that can be exposed via the air, by means of an air-liquid interface (ALI) are promising in vitro models for evaluating the safety of nanomaterials (NMs) after inhalation exposure. We performed an inter-laboratory comparison study to evaluate the transferability and reproducibility of a lung model consisting of the human bronchial cell line Calu-3 as a monoculture and, to increase the physiologic relevance of the model, also as a co-culture with macrophages (either derived from the THP-1 monocyte cell line or from human blood monocytes). The lung model was exposed to NMs using the VITROCELL® Cloud12 system at physiologically relevant dose levels. RESULTS: Overall, the results of the 7 participating laboratories are quite similar. After exposing Calu-3 alone and Calu-3 co-cultures with macrophages, no effects of lipopolysaccharide (LPS), quartz (DQ12) or titanium dioxide (TiO2) NM-105 particles on the cell viability and barrier integrity were detected. LPS exposure induced moderate cytokine release in the Calu-3 monoculture, albeit not statistically significant in most labs. In the co-culture models, most laboratories showed that LPS can significantly induce cytokine release (IL-6, IL-8 and TNF-α). The exposure to quartz and TiO2 particles did not induce a statistically significant increase in cytokine release in both cell models probably due to our relatively low deposited doses, which were inspired by in vivo dose levels. The intra- and inter-laboratory comparison study indicated acceptable interlaboratory variation for cell viability/toxicity (WST-1, LDH) and transepithelial electrical resistance, and relatively high inter-laboratory variation for cytokine production. CONCLUSION: The transferability and reproducibility of a lung co-culture model and its exposure to aerosolized particles at the ALI were evaluated and recommendations were provided for performing inter-laboratory comparison studies. Although the results are promising, optimizations of the lung model (including more sensitive read-outs) and/or selection of higher deposited doses are needed to enhance its predictive value before it may be taken further towards a possible OECD guideline.

Interlaboratory comparison for dichloroacetic acid and trichloroacetic acid determination in drinking water / 公共卫生与预防医学

Objective To improve the detection ability of laboratories, and to identify possible technical defects in the detection of dichloroacetic acid and trichloroacetic acid in drinking water. Methods A number of laboratories were organized to conduct interlaboratory determination of dichloroacetic acid and trichloroacetic acid in drinking water. Prefabricated standard series and intermediate samples were distributed. Data of determination were collected and statistically analyzed to evaluate the detection results. Results The slopes of dichloroacetic acid and trichloroacetic acid working curves were analyzed by Grubbs test. The analysis results showed that there were 1 outlier in the dichloroacetic acid data and 3 outliers in the trichloroacetic acid data, respectively. The determination results of the spiked samples of dichloroacetic acid and trichloroacetic acid were 1.5 and 4 times the actual value, respectively. Conclusion This investigation reveals that there exist some technical problems in the direct determination of dichloroacetic acid and trichloroacetic acid by gas chromatography, such as inappropriate selection of chromatographic conditions and injection port flow control, and incorrect way of spiking internal standards.

[Inter-laboratory comparison analysis of noise measurement in 91 occupational hygiene technical service organizations].

Objective: To understand the comparability of noise measurement results of various occupational hygiene technical service organizations in Guangdong Province by conducting inter-laboratory comparison of measuring instruments and personnel operation. Methods: In October 2020, the instrument comparison and personnel comparison among 91 occupational hygiene technical service organizations engaged in noise measurement in Guangdong Province were carried out in the form of fixed-point measurement and simulated workplace measurement, and the results were analyzed and evaluated by using the robust z-ratio score. Results: In the instrument comparison, 6 organizations had 1 or 2 outliers in their z-ratio scores, 2 organizations had 2 problematic values in their z-ratio scores, and a total of 8 organizations (accounting for 8.8%) were judged as unqualified; A total of 83 organizations (accounting for 91.2%) with satisfactory z-ratio scores or only one problematic value were judged as qualified. In the personnel comparison, there were 11 organizations with 1 or 2 outliers in the z-ratio score, and 1 organization with 2 problematic values in the z-ratio score. A total of 12 organizations (13.2%) were judged as unqualified and 79 organizations (accounting for 86.8%) with satisfactory z-ratio scores or only one problematic value were judged as qualified. Through comprehensive judgment, 20 organizations (22.0%) were judged as unqualified, and 71 organizations (78.0%) were judged as qualified. There was no statistically significant difference in the qualified rates of instrument comparison results, personnel comparison results and comprehensive evaluation results of non-private organizations and private organizations (P>0.05). There was no significant difference in the qualified rates of instrument comparison results and comprehensive evaluation results of qualified organizations and unqualified organizations (P>0.05), there was significant difference in the qualified rate of personnel comparison results (P<0.05) . Conclusion: The noise measurement results of some occupational health technical service organizations in Guangdong Province are generally comparable. To carry out inter-laboratory comparison of noise instrument performance and personnel operation ability of occupational hygiene technical service organizations, can comprehensively evaluate the testing process of each organization and find out the problems existing in each organization.

An inter-laboratory effort to harmonize the cell-delivered in vitro dose of aerosolized materials.

Air-liquid interface (ALI) lung cell models cultured on permeable transwell inserts are increasingly used for respiratory hazard assessment requiring controlled aerosolization and deposition of any material on ALI cells. The approach presented herein aimed to assess the transwell insert-delivered dose of aerosolized materials using the VITROCELL® Cloud12 system, a commercially available aerosol-cell exposure system. An inter-laboratory comparison study was conducted with seven European partners having different levels of experience with the VITROCELL® Cloud12. A standard operating procedure (SOP) was developed and applied by all partners for aerosolized delivery of materials, i.e., a water-soluble molecular substance (fluorescence-spiked salt) and two poorly soluble particles, crystalline silica quartz (DQ12) and titanium dioxide nanoparticles (TiO2 NM-105). The material dose delivered to transwell inserts was quantified with spectrofluorometry (fluorescein) and with the quartz crystal microbalance (QCM) integrated in the VITROCELL® Cloud12 system. The shape and agglomeration state of the deposited particles were confirmed with transmission electron microscopy (TEM). Inter-laboratory comparison of the device-specific performance was conducted in two steps, first for molecular substances (fluorescein-spiked salt), and then for particles. Device- and/or handling-specific differences in aerosol deposition of VITROCELL® Cloud12 systems were characterized in terms of the so-called deposition factor (DF), which allows for prediction of the transwell insert-deposited particle dose from the particle concentration in the aerosolized suspension. Albeit DF varied between the different labs from 0.39 to 0.87 (mean (coefficient of variation (CV)): 0.64 (28%)), the QCM of each VITROCELL® Cloud 12 system accurately measured the respective transwell insert-deposited dose. Aerosolized delivery of DQ12 and TiO2 NM-105 particles showed good linearity (R2 > 0.95) between particle concentration of the aerosolized suspension and QCM-determined insert-delivered particle dose. The VITROCELL® Cloud 12 performance for DQ12 particles was identical to that for fluorescein-spiked salt, i.e., the ratio of measured and salt-predicted dose was 1.0 (29%). On the other hand, a ca. 2-fold reduced dose was observed for TiO2 NM-105 (0.54 (41%)), which was likely due to partial retention of TiO2 NM-105 agglomerates in the vibrating mesh nebulizer of the VITROCELL® Cloud12. This inter-laboratory comparison demonstrates that the QCM integrated in the VITROCELL® Cloud 12 is a reliable tool for dosimetry, which accounts for potential variations of the transwell insert-delivered dose due to device-, handling- and/or material-specific effects. With the detailed protocol presented herein, all seven partner laboratories were able to demonstrate dose-controlled aerosolization of material suspensions using the VITROCELL® Cloud12 exposure system at dose levels relevant for observing in vitro hazard responses. This is an important step towards regulatory approved implementation of ALI lung cell cultures for in vitro hazard assessment of aerosolized materials.

An inter-laboratory comparison of an NLRP3 inflammasome activation assay and dendritic cell maturation assay using a nanostructured lipid carrier and a polymeric nanomedicine, as exemplars.

Nanoparticles including nanomedicines are known to be recognised by and interact with the immune system. As these interactions may result in adverse effects, for safety evaluation, the presence of such interactions needs to be investigated. Nanomedicines in particular should not unintendedly interact with the immune system, since patient's exposure is not minimised as in the case of 'environmental' nanoparticles, and repeated exposure may be required. NLRP3 inflammasome activation and dendritic cell (DC) maturation are two types of immune mechanisms known to be affected by nanoparticles including nanomedicines. NLRP3 inflammasome activation results in production of the pro-inflammatory cytokines IL-1ß and IL-18, as well as a specific type of cell death, pyroptosis. Moreover, chronic NLRP3 inflammasome activation has been related to several chronic diseases. Upon maturation, DC activate primary T cells; interference with this process may result in inappropriate activation and skewing of the adaptive immune response. Here, we evaluated the effect of two nanomedicines, representing nanostructured lipid carriers and polymers, on these two assays. Moreover, with a view to possible future standardisation and regulatory application, these assays were subject to an inter-laboratory comparison study using common SOPs. One laboratory performed three independent NLRP3 inflammasome activation experiments, while the other performed a single experiment. Two laboratories each performed three independent DC maturation experiments. While the nanostructured lipid carrier only showed marginal effects, the polymers showed major cytotoxicity. No evidence for inflammasome activation or DC maturation was demonstrated. Intra- and inter-laboratory comparison showed clearly reproducible results.

A statistic comparison of multi-element analysis of low atmospheric fine particles (PM2.5) using different spectroscopy techniques.

Over the past few decades, the metal elements (MEs) in atmospheric particles have aroused great attention. Some well-established techniques have been used to measure particle-bound MEs. However, each method has its own advantages and disadvantages in terms of complexity, accuracy, and specific elements of interest. In this study, the performances of inductively coupled plasma-optical emission spectrometry (ICP-OES) and total reflection X-ray fluorescence spectroscopy (TXRF) were evaluated for quality control to analyze data accuracy and precision. The statistic methods (Deming regression and significance testing) were applied for intercomparison between ICP-OES and TXRF measurements for same low-loading PM2.5 samples in Weizhou Island. The results from the replicate analysis of standard filters (SRM 2783) and field filters samples indicated that 10 MEs (K, Ca, V, Cr, Mn, Fe, Ni, Cu, Zn, and Pb) showed good accuracies and precision for both techniques. The higher accuracy tended to the higher precision in the MEs analysis process. In addition, the interlab comparisons illustrated that V and Mn all had good agreements between ICP-OES and TXRF. The measurements of K, Cu and Zn were more reliable by TXRF analysis for low-loading PM2.5. ICP-OES was more accurate for the determinations for Ca, Cr, Ni and Pb, owing to the overlapping spectral lines and low sensitivity during TXRF analysis. The measurements of Fe, influenced by low-loading PM2.5, were not able to determine which instrument could obtain more reliable results. These conclusions could provide reference information to choose suitable instrument for the determination of MEs in low-loading PM2.5 samples.

Comparative Evaluation of Plasma Metabolomic Data from Multiple Laboratories.

In mass spectrometry-based metabolomics, the differences in the analytical results from different laboratories/machines are an issue to be considered because various types of machines are used in each laboratory. Moreover, the analytical methods are unique to each laboratory. It is important to understand the reality of inter-laboratory differences in metabolomics. Therefore, we have evaluated whether the differences in analytical methods, with the exception sample pretreatment and including metabolite extraction, are involved in the inter-laboratory differences or not. In this study, nine facilities are evaluated for inter-laboratory comparisons of metabolomic analysis. Identical dried samples prepared from human and mouse plasma are distributed to each laboratory, and the metabolites are measured without the pretreatment that is unique to each laboratory. In these measurements, hydrophilic and hydrophobic metabolites are analyzed using 11 and 7 analytical methods, respectively. The metabolomic data acquired at each laboratory are integrated, and the differences in the metabolomic data from the laboratories are evaluated. No substantial difference in the relative quantitative data (human/mouse) for a little less than 50% of the detected metabolites is observed, and the hydrophilic metabolites have fewer differences between the laboratories compared with hydrophobic metabolites. From evaluating selected quantitatively guaranteed metabolites, the proportion of metabolites without the inter-laboratory differences is observed to be slightly high. It is difficult to resolve the inter-laboratory differences in metabolomics because all laboratories cannot prepare the same analytical environments. However, the results from this study indicate that the inter-laboratory differences in metabolomic data are due to measurement and data analysis rather than sample preparation, which will facilitate the understanding of the problems in metabolomics studies involving multiple laboratories.

Ensuring the reliability of brominated flame retardant data on food and feed occurrence through harmonised analytical criteria and proficiency testing.

The volume of occurrence data on food and animal feed contaminants such as polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDDs) is slowly increasing as more laboratories develop analytical capability. This data allows an evaluation of current background levels in different countries and regions and is also useful for estimating the health risk through dietary exposure and as evidence for the formulation of future control strategies. Existing data varies in the number of analytes reported and the quality measures applied. In order to ensure reliability and comparability, guidance on analytical criteria such as precision and trueness, limits of quantitation, recovery, positive identification, etc. is provided. These parameters are based on several years of collective experience and allow validation and regular quality control of analysis of individual PBDE congeners and HBCDD stereoisomers. The criteria-based approach also allows laboratories the flexibility to use different analytical methodologies and techniques for generating data. The effectiveness of this approach has been demonstrated by a successful proficiency testing scheme that has been used for a number of years and has attracted an increasing number of participants. The majority of participating laboratories (>80%) have been able to demonstrate performance within the 95% confidence interval (│z-score│≤ 2) and a further 10% of laboratories demonstrated performance with a z-score of (2 <│z-score│< 3). The combined support of these guidance criteria backed by successful proficiency testing will ensure the reliability and comparability of results, in particular, to refine risk assessments and to help the formulation of regulatory policy.

RENEB/EURADOS field exercise 2019: robust dose estimation under outdoor conditions based on the dicentric chromosome assay.

PURPOSE: Biological and/or physical assays for retrospective dosimetry are valuable tools to recover the exposure situation and to aid medical decision making. To further validate and improve such biological and physical assays, in 2019, EURADOS Working Group 10 and RENEB performed a field exercise in Lund, Sweden, to simulate various real-life exposure scenarios. MATERIALS AND METHODS: For the dicentric chromosome assay (DCA), blood tubes were located at anthropomorphic phantoms positioned in different geometries and were irradiated with a 1.36 TBq 192Ir-source. For each exposure condition, dose estimates were provided by at least one laboratory and for four conditions by 17 participating RENEB laboratories. Three radio-photoluminescence glass dosimeters were placed at each tube to assess reference doses. RESULTS: The DCA results were homogeneous between participants and matched well with the reference doses (≥95% of estimates within ±0.5 Gy of the reference). For samples close to the source systematic underestimation could be corrected by accounting for exposure time. Heterogeneity within and between tubes was detected for reference doses as well as for DCA doses estimates. CONCLUSIONS: The participants were able to successfully estimate the doses and to provide important information on the exposure scenarios under conditions closely resembling a real-life situation.

RENEB Inter-Laboratory comparison 2017: limits and pitfalls of ILCs.

PURPOSE: In case of a mass-casualty radiological event, there would be a need for networking to overcome surge limitations and to quickly obtain homogeneous results (reported aberration frequencies or estimated doses) among biodosimetry laboratories. These results must be consistent within such network. Inter-laboratory comparisons (ILCs) are widely accepted to achieve this homogeneity. At the European level, a great effort has been made to harmonize biological dosimetry laboratories, notably during the MULTIBIODOSE and RENEB projects. In order to continue the harmonization efforts, the RENEB consortium launched this intercomparison which is larger than the RENEB network, as it involves 38 laboratories from 21 countries. In this ILC all steps of the process were monitored, from blood shipment to dose estimation. This exercise also aimed to evaluate the statistical tools used to compare laboratory performance. MATERIALS AND METHODS: Blood samples were irradiated at three different doses, 1.8, 0.4 and 0 Gy (samples A, C and B) with 4-MV X-rays at 0.5 Gy min-1, and sent to the participant laboratories. Each laboratory was requested to blindly analyze 500 cells per sample and to report the observed frequency of dicentric chromosomes per metaphase and the corresponding estimated dose. RESULTS: This ILC demonstrates that blood samples can be successfully distributed among laboratories worldwide to perform biological dosimetry in case of a mass casualty event. Having achieved a substantial harmonization in multiple areas among the RENEB laboratories issues were identified with the available statistical tools, which are not capable to advantageously exploit the richness of results of a large ILCs. Even though Z- and U-tests are accepted methods for biodosimetry ILCs, setting the number of analyzed metaphases to 500 and establishing a tests' common threshold for all studied doses is inappropriate for evaluating laboratory performance. Another problem highlighted by this ILC is the issue of the dose-effect curve diversity. It clearly appears that, despite the initial advantage of including the scoring specificities of each laboratory, the lack of defined criteria for assessing the robustness of each laboratory's curve is a disadvantage for the 'one curve per laboratory' model. CONCLUSIONS: Based on our study, it seems relevant to develop tools better adapted to the collection and processing of results produced by the participant laboratories. We are confident that, after an initial harmonization phase reached by the RENEB laboratories, a new step toward a better optimization of the laboratory networks in biological dosimetry and associated ILC is on the way.

Inter-Laboratory Comparison of Extracellular Vesicle Isolation Based on Ultracentrifugation.

BACKGROUND/AIMS: Extracellular vesicles (EVs), including microvesicles and exosomes, deliver bioactive cargo mediating intercellular communication in physiological and pathological conditions. EVs are increasingly investigated as therapeutic agents and targets, but also as disease biomarkers. However, a definite consensus regarding EV isolation methods is lacking, which makes it intricate to standardize research practices and eventually reach a desirable level of data comparability. In our study, we performed an inter-laboratory comparison of EV isolation based on a differential ultracentrifugation protocol carried out in 4 laboratories in 2 independent rounds of isolation. METHODS: Conditioned medium of colorectal cancer cells was prepared and pooled by 1 person and distributed to each of the participating laboratories for isolation according to a pre-defined protocol. After EV isolation in each laboratory, quantification and characterization of isolated EVs was collectively done by 1 person having the highest expertise in the respective test method: Western blot, flow cytometry (fluorescence-activated cell sorting [FACS], nanoparticle tracking analysis (NTA), and transmission electron microscopy (TEM). RESULTS: EVs were visualized with TEM, presenting similar cup-shaped and spherical morphology and sizes ranging from 30 to 150 nm. NTA results showed similar size ranges of particles in both isolation rounds. EV preparations showed high purity by the expression of EV marker proteins CD9, CD63, CD81, Alix, and TSG101, and the lack of calnexin. FACS analysis of EVs revealed intense staining for CD63 and CD81 but lower levels for CD9 and TSG101. Preparations from 1 laboratory presented significantly lower particle numbers (p < 0.0001), most probably related to increased processing time. However, even when standardizing processing time, particle yields still differed significantly between groups, indicating inter-laboratory differences in the efficiency of EV isolation. Importantly, no relation was observed between centrifugation speed/k-factor and EV yield. CONCLUSIONS: Our findings demonstrate that quantitative differences in EV yield might be due to equipment- and operator-dependent technical variability in ultracentrifugation-based EV isolation. Furthermore, our study emphasizes the need to standardize technical parameters such as the exact run speed and k-factor in order to transfer protocols between different laboratories. This hints at substantial inter-laboratory biases that should be assessed in multi-centric studies.

Reliability of Morphological and PCR Methods for the Official Diagnosis of Aethina tumida (Coleoptera: Nitidulidae): A European Inter-Laboratory Comparison.

The Small Hive Beetle (Aethina tumida Murray, 1867) is an invasive scavenger of honeybees. Originally endemic in sub-Saharan Africa, it is regulated internationally in order to preserve the areas still free from this species. To ensure the reliability of official diagnoses in case of introduction, an inter-laboratory comparison was organised on the identification of A. tumida by morphology and real-time PCR. Twenty-two National Reference Laboratories in Europe participated in the study and analysed 12 samples with adult coleopterans and insect larvae. The performance of the laboratories was evaluated in terms of sensitivity and specificity. Sensitivity was satisfactory for all the participants and both types of methods, thus fully meeting the diagnostic challenge of confirming all truly positive cases as positive. Two participants encountered specificity problems. For one, the anomaly was minor whereas, for the other, the issues concerned a larger number of results, especially real-time PCR, which probably were related to inexperience with this technique. The comparison demonstrated the reliability of official diagnosis, including the entire analytical process of A. tumida identification: from the first step of the analysis to the expression of opinions. The performed diagnostic tools, in parallel with field surveillance, are essential to managing A. tumida introduction.

Development of a reference material for analysing naturally occurring radioactive material from the steel industry.

Accurate measurement of naturally occurring radionuclides in blast furnace slag, a by-product of the steel industry, is required for compliance with building regulations where it is often used as an ingredient in cement. A matrix reference blast furnace slag material has been developed to support traceability in these measurements. Raw material provided by a commercial producer underwent stability and homogeneity testing, as well as characterisation of matrix constituents, to provide a final candidate reference material. The radionuclide content was then determined during a comparison exercise that included 23 laboratories from 14 countries. Participants determined the activity per unit mass for 226Ra, 232Th and 40K using a range of techniques. The consensus values obtained from the power-moderated mean of the reported participant results were used as indicative activity per unit mass values for the three radionuclides: A0(226Ra) = 106.3 (34) Bq·kg-1, A0(232Th) = 130.0 (48) Bq·kg-1 and A0(40K) = 161 (11) Bq·kg-1 (where the number in parentheses is the numerical value of the combined standard uncertainty referred to the corresponding last digits of the quoted result). This exercise helps to address the current shortage of NORM industry reference materials, putting in place infrastructure for production of further reference materials.

Nanoparticle size and 3D shape measurement by electron tomography: An Inter-Laboratory Comparison.

Electron tomography (ET) has been used for quantitative measurement of shape and size of objects in three dimensions (3D) for many years. However, systematic investigation of repeatability and reproducibility of ET has not been evaluated in detail. To assess the reproducibility and repeatability of a protocol for measuring size and three-dimensional (3D) shape parameters for nanoparticles (NPs) by ET, an inter-laboratory comparison (ILC) has been performed. The ILC included six laboratories and six instruments models from three instrument manufacturers following a standard measurement protocol. A technical specification describing the normative steps of the protocol is published by the International Standards Organization (ISO). Gold NPs with 30 nm nominal diameter contained within a rod-shaped carbon support were measured. The use of a rod-shaped sample support eliminated the missing wedge effect in the experimental tilt series of projected images for improved quantification. A total of 443 NPs were initially measured by NRC-NANO and then 115 out of the 443 NPs were measured by five other labs to compare measurands such as the Volume (V), maximum Feret diameter (Fmax), minimum Feret diameter (Fmin), volume-equivalent diameter (Deq) and aspect ratio (Frat) of the NPs. The results of the five labs were compared with the results obtained at NRC-NANO. The maximum disagreement in measurements of Fmin and Fmax obtained by the participating labs did not exceed 7 %. The measured Deq was between 27.5 nm and 30.3 nm in agreement with the NP manufacturer's specification (28 nm-32 nm). In addition to the above, the influence of the missing wedge effect and beam-induced NP movement was quantified based on the differences of the results between labs.

Analysis on comparison of inter-laboratory results of chemical volatile organic compounds / 中国职业医学

OBJECTIVE: To analyze the comparison results of volatile organic components in chemicals tested by occupational health laboratories.METHODS: A total of 37 reference laboratories that participated in the 2019 National Occupational Health Inspection and Testing Institution Laboratory Comparison Chemical Qualitative Testing Comparison organized by Guangdong Occupational Health Testing Center were selected as the research subjects. Headspace gas chromatography-mass spectrometry was used for the determination of volatile organic components in chemicals. The comparison results of reference laboratories were collected and implemented with qualitative and quantitative evaluation. RESULTS: The qualified rates of the qualitative results of the required hazard factors and other hazard factors in the reference laboratories were higher than those of the quantitative results of similar factors with statistical significance(83.78% vs 67.57%, 89.19% vs 56.76%, all P<0.05). There was no significant difference in the qualified rate of qualitative and quantitative results and comprehensive judgment results among each reference laboratory with other hazard factors(83.78% vs 89.19%, 67.57% vs 56.76%, 83.78% vs 89.19%, all P>0.05). The qualified rate of 37 reference laboratories was 89.19%(33/37). It showed no significant difference in the qualified rate of qualitative, quantitative and comprehensive judgment results among the reference laboratories of disease prevention and control system and non-disease prevention and control system(93.75% vs 85.72%, 85.00% vs 61.91%, 93.75% vs 85.52%,all P>0.05). CONCLUSION: There are great differences in the detection ability of volatile organic components on chemicals of each reference laboratory. The ability of qualitative detection is superior to the quantitative detection.

Investigation on salt sales and salt iodine content in Guizhou Province three years after the system reform of salt industry / 中华地方病学杂志

Objective:To understand the salt sales situation and salt iodine content in the market of Guizhou Province 3 years after the system reform of salt industry.Methods:From August to October 2020, in 9 cities (prefectures) of Guizhou Province, 2 counties (cities and districts) were selected from each city (prefecture), 1 urban area and 1 township were selected from each county (city and district), 1 large supermarket and 1 farmers' market were selected in the urban area, and 1 small supermarkets or convenience stores were selected in the township, to check the varieties, place of origin and iodine content label on the package of salt sold, and different brands of salt were collected and sent to the provincial and county salt iodine laboratories. The iodine content was determined and analyzed.Results:A total of 18 large supermarkets, 18 farmers' markets and 18 small supermarkets or convenience stores were investigated, and 70 salt samples of 23 brands, 3 types and origin from 11 provinces were collected. Among them, there were 56 samples with iodine content of 21 - 39 mg/kg on the package. The iodine content range of provincial detection was 19.23 - 37.41 mg/kg (two of them were lower than 21.0 mg/kg), and the median was 25.75 mg/kg. There were 12 samples of two iodine contents (18 - 33 and 21 - 39 mg/kg) marked on the package, and the salt iodine range of provincial detection was 23.52 - 32.90 mg/kg, with a median of 26.55 mg/kg. One sample was marked with 18 - 33 mg/kg, and the iodine content of provincial detection was 25.20 mg/kg; the iodine content of 1 sample of non-iodized salt was not detected. According to the actual test value, iodine contents of 68 samples were within the range of packaging marks, accounting for 97.14% of the total. Taking the provincial test results as a standard, the absolute value of the relative deviation of the provincial and county test results was 0 - 27.45%, the average deviation was 7.65%, and the coincidence rate was 91.43% (66/70). The county test results were acceptable.Conclusions:After the system reform of salt industry, there are many kinds of salt which come from many provinces, and more than 97% of the salt iodine content which is within the standard range of salt concentration in Guizhou Province.