A rare combination of sagittal fracture of the medial femoral condyle (Trélat fracture) with an ipsilateral femoral shaft fracture: A case report.

INTRODUCTION: Isolated unicondylar fractures of the distal femur are rare injuries, accounting for 3-6 % of adult femur fractures. The association with a femoral shaft fracture is very rare and, to our knowledge, has, never been described in the literature. CASE PRESENTATION: In this article, we report the case of a 19-year-old motorcyclist involved in an accident, that resulted in both a midshaft transverse femoral fracture and an ipsilateral sagittal fracture of the medial femoral condyle (Trélat fracture). CLINICAL DISCUSSION: The surgical intervention involved open reduction and internal fixation for both fractures, utilizing a dynamic compression plate for the femoral shaft fracture and screws for the medial condyle fracture. Postoperative results showed excellent fracture reduction, and the patient progressed well with rehabilitation. The choice of fixation method for the sagittal medial femoral condyle fracture considered the unique anatomical challenges posed by this rare combination, the emergency (fat embolism), and the fact we didn't have a retrograde nail in our structure. A dynamic compression plate was used for femoral shaft fracture and screw fixation for condyle fracture treatment. The traction table in anterograde femoral nailing, led to the recurvatum of the condylar fracture and difficulty accessing it with the medial subvastus approach. CONCLUSION: This case report adds a description of a rare combination and valuable insight into the management of complex femoral fractures, emphasizing the importance of individualized treatment approaches.

Articular fracture of the distal humerus classified Dubberley 2b: Case report of two patients and review of the literature.

Articular fractures of the distal humerus are rare, and even rarer are fractures involving the trochlea and capitellum in a single fragment, with no associated comminution. These fractures are classified as 2a according to the Dubberley classification and are rarely described in the literature. Two cases of Dubberley 2a fractures were treated at our hospital. The first case, involving a 68-year-old patient, was treated with a medial and a lateral approach, combined with posteroanterior fixation using 3 Herbert screws. In the 2nd case, a 16-year-old male was treated with a single lateral approach, permitting fixation with two Herbert screws. One of the two screws is inserted into the bone at the edge of the cartilage, with an anteroposterior trajectory that leaves the cartilage intact. We opted mainly for posteroanterior screw fixation in subchondral bone, which is less damaging to articular cartilage and soft tissues and has already demonstrated its reliability. No associated lesions were found, and no complications were encountered. Results were excellent, with Mayo Elbow Performance Index (MEPI) scores of 95 and 100 respectively. Herbert screw fixation therefore appears to be an option of choice for these fractures, although comparative studies are needed to evaluate the different treatments available.

[Basic principles of surgical treatment of distal radius fractures]. / Grundprinzipien der operativen Versorgung der distalen Radiusfraktur.

Distal radius fractures are one of the most frequent fractures of the upper extremities. The decision for conservative or surgical treatment is made after appropriate diagnostics using conventional radiographic and usually computed tomography imaging examinations. If the indications for surgical treatment are present, various options for reduction and fixation are available. The spectrum ranges from closed to open procedures up to accompanying arthroscopic support. Appropriate preoperative patient education about the procedure and the planned postinterventional treatment is essential. The goal of treatment is to restore wrist function while maintaining mobility and strength with a low risk of complications. All surgical procedures share the principle of reduction to restore anatomical relationship followed by fixation. Closed procedures include fixation with Kirschner wires and the construction of an external fixator. Volar locking plate osteosynthesis has become established in recent years as the method of choice for the majority of the fractures to be treated. For special fracture patterns and the treatment of accompanying injuries, arthroscopic support can be indicated. There is no uniform consensus on the best choice of procedure. This article discusses the possible procedures including the approaches, fixation techniques and specific follow-up treatment.

The utility of standing knee radiographs for detection of lipohemarthrosis: comparison with supine horizontal beam radiographs.

OBJECTIVES: Lipohemarthrosis is a key finding in acute trauma patients and indicates an intra-articular fracture. The horizontal beam lateral radiography with supine position is known to be the best technique to demonstrate knee lipohemarthrosis. Our main purpose was to compare the sensitivity of supine and standing lateral knee radiographs to detect lipohemarthrosis. METHODS: In our retrospective study, consecutive patients with lipohemarthrosis on computed tomography of the knee between October 2019 and September 2021 were included. Fractured bone, the presence of lipohemarthrosis, and image quality in both standing and supine anteroposterior and lateral knee radiographs were evaluated. Interobserver reliability of the three observers was calculated. Fisher exact chi-square and z-proportion tests were used to compare lateral and anteroposterior knee radiographs. Krippendorff's Alpha and Kappa coefficients were used for inter-observer agreement. RESULTS: A total of 61 patients (38 men [62.3%], 23 women [37.7%]; mean age, 43 years ± 17 [standard deviation]) were included. The most common type of fracture was isolated tibial fractures (n = 32; 52.5%). The sensitivity of showing lipohemarthrosis of standing lateral knee radiographs (95.5%) was higher than supine lateral radiographs (38.5%) (p < 0.001). While non-optimal image quality did not affect lipohemarthrosis detection on lateral radiographs (p > 0.99), it caused a significant decrease in the diagnosis of lipohemarthrosis on anteroposterior radiographs (p = 0.036). We found a good-excellent interobserver agreement in lipohemarthrosis detection. CONCLUSIONS: Standing lateral radiographs have higher sensitivity than supine lateral radiographs in detecting lipohemarthrosis and are beneficial for detecting lipohemarthrosis which indicates the presence of occult-evident intraarticular fracture in patients with knee trauma. CLINICAL RELEVANCE STATEMENT: Standing lateral knee radiographs offer a useful method for reducing the misdiagnosis of the occult intra-articular fractures by showing the fat-fluid leveling more clearly. Its advantages may be more prominent when the advanced imaging modalities are limited. KEY POINTS: • Fat-fluid level (lipohemarthrosis) is an important radiographic sign to assess patients with acute trauma. It almost always indicates an intra-articular fracture. • Our retrospective study results support that lipohemarthrosis sign could be observed more frequently in standing lateral knee radiographs than in supine lateral radiographs. • Knee trauma patients, when available, should be evaluated with standing lateral radiographs for the diagnosis of lipohemarthrosis.

Biomechanical comparison of headless compression screws versus independent locking screw for intra-articular fractures.

PURPOSE: Headless compression screws (HCS) have a variable thread pitch and headless design enabling them to embed below the articular surface and generate compression force for fracture healing without restricting movement. Locking screws have greater variety of dimensions and a threaded pitch mirroring the design of the HCS. The objective of this study is to determine whether locking screws can generate compression force and compare the compressive forces generated by HCS versus locking screws. METHOD: A comparison between 3.5-mm HCS versus 3.5-mm locking screws and 2.8-mm HCS versus 2.7-mm locking screws was performed using a synthetic foam bone model (Synbone) and FlexiForce sensors to record the compression forces (N). The mean peak compression force was calculated from a sample of 3 screws for each screw type. Statistical analysis was performed using the one-way ANOVA test and statistical significance was determined to be p = < 0.05. RESULTS: The 3.5-mm Synthes and Smith and Nephew locking screws generated similar peak compression forces to the 3.5-mm Acutrak 2 headless compression screws with no statistically significant difference between them. The smaller 2.7-mm Synthes and Smith and Nephew locking screws initially generated similar compressive forces up to 1.5 and 2 revolutions, respectively, but their peak compression force was less compared to the 2.8-mm Micro Acutrak 2 HCS. CONCLUSION: Locking screws are able to generate compressive forces and may be a viable alternative to headless compressive screws supporting their use for intra-articular fractures.

Effect of Targeted Cytokine Inhibition on Progression of Post-Traumatic Osteoarthritis Following Intra-Articular Fracture.

Intra-articular fractures (IAF) result in significant and prolonged inflammation, increasing the chances of developing post-traumatic osteoarthritis (PTOA). Interleukin-one beta (IL-1ß) and Tumor Necrosis Factor-alpha (TNF-α) are key inflammatory factors shown to be involved in osteochondral degradation following IAF. As such, use of targeted biologics such as Infliximab (INX), a TNF-α inhibitor, and Anakinra (ANR), an interleukin-one (IL-1) receptor antagonist (IL1RA), may protect against PTOA by damping the inflammatory response to IAF and reducing osteochondral degradation. To test this hypothesis, IAFs were induced in the hindlimb knee joints of rats treated with INX at 10 mg/kg/day, ANR at 100 g/kg/day, or saline (vehicle control) by subcutaneous infusion for a period of two weeks and healing was evaluated at 8-weeks post injury. Serum and synovial fluid (SF) were analyzed for soluble factors. In-vivo microcomputed tomography (µCT) scans assessed bone mineral density and bone morphometry measurements. Cationic CA4+ agent assessed articular cartilage composition via ex vivo µCT. Scoring according to the Osteoarthritis Research Society International (OARSI) guidelines was performed on stained histologic tibia sections at the 56-day endpoint on a 0-6 scale. Systemically, ANR reduced many pro-inflammatory cytokines and reduced osteochondral degradation markers Cross Linked C-Telopeptide Of Type II (CTXII, p < 0.05) and tartrate-resistant acid phosphatase (TRAP, p < 0.05). ANR treatment resulted in increased chemokines; macrophage-chemotractant protein-1 (MCP-1), MPC-3, macrophage inhibitory protein 2 (MIP2) with a concomitant decrease in proinflammatory interleukin-17A (IL17A) at 14 days post-injury within the SF. Microcomputed tomography (µCT) at 56 days post-injury revealed ANR Treatment decreased epiphyseal degree of anisotropy (DA) (p < 0.05) relative to saline. No differences were found with OARSI scoring but contrast-enhanced µCT revealed a reduction in glycosaminoglycan content with ANR treatment. These findings suggest targeted cytokine inhibition, specifically IL-1 signaling, as a monotherapy has minimal utility for improving IAF healing outcomes but may have utility for promoting a more permissive inflammatory environment that would allow more potent disease modifying osteoarthritis drugs to mitigate the progression of PTOA after IAF.

Fractura triplanar de tibia distal: Reporte de un caso y revisión de la literatura / Triplanar fracture of proximal tibia: A case report and literature review

Las fracturas triplanares de tibia distal, son fracturas complejas caracterizadas por afectación multiplanar, clasificándose como Salter Harris tipo IV, en el periodo de cierre fisiario. Son poco frecuentes, representando el 5-15% de las fracturas pediátricas. El mecanismo de lesión que ocurre con mayor frecuencia, consiste en supinación y rotación externa. La tomografía computarizada es actualmente el Gold Standard para el diagnóstico de este tipo de fractura, nos permite evaluar todos los planos, siendo la radiografía simple insuficiente para el diagnóstico ya que puede pasar desapercibida. Paciente de 14 años de edad con fractura triplanar en 2 partes de tibia distal, con resolución quirúrgica. Nuestro caso es un ejemplo de una fractura triplanar de tibia distal, la cual es de baja frecuencia, difícil diagnostico e interpretación. Presentamos imágenes preoperatorias, intraoperatorias y postoperatorias del manejo de esta lesión, obteniendo resultados satisfactorios clínicos, funcionales y en estudios de imágenes. Es indispensable lograr una reducción anatómica de la superficie articular para lograr una evolución satisfactoria. Se recomienda una tomografía computarizada para diagnosticar y manejar esta lesión de manera adecuada. El seguimiento postoperatorio es crucial para el manejo de este paciente, ya que se espera una discrepancia en la longitud de las extremidades y/o deformidad(AU)

Triplane fractures of the distal tibia are complex fractures characterized by multiplane effects. They are classified in the Salter-Harris system as type IV in the period of physeal closure. These fractures are rare and represent 5-15% of pediatric fractures. The most common mechanism of injury is supination and external rotation. Computed tomography is currently the Gold Standard for the diagnosis of this type of fracture since it allows us to evaluate all planes, while plain radiography is insufficient because the fracture can go unnoticed. The objective is to report the clinical case of a 14-year-old patient with triplanar fracture in 2 parts of the distal tibia with surgical resolution. This case is an example of a triplanar fracture of the distal tibia, which is of low frequency, and difficult to diagnose and interpret. Preoperative, intraoperative and postoperative images of the management of this lesion are presented, obtaining satisfactory clinical, functional and imaging study results. It is essential to achieve an anatomical reduction of the joint surface to achieve a satisfactory evolution. A CT scan is recommended to properly diagnose and manage this injury. Postoperative follow-up is crucial for the management of this patient, as a limb length discrepancy and/or deformity is expected(AU)

Clinical and Patient reported outcomes following open reduction and internal fixation for distal tibial intra-articular fractures.

INTRODUCTION: Intra-articular distal tibial plafond fractures are rare injuries, provide a challenge for the surgeon and can often have poor outcomes. The aim of this paper was to report long term patient reported functional outcomes, health related quality of life (QoL) scores and rates of complications in order to fully counsel the patient on likely outcomes and set realistic post-operative expectations for the patient. METHODS: We conducted a retrospective review of 20 patients with distal tibial intra-articular fractures that presented to our institution between September 2014 and September 2020. All patients underwent open reduction and internal fixation (ORIF). Clinical, radiological and patient reported outcome measures (PROMS), quality of life (QoL) scores and complications were collected. RESULTS: The mean age of the patients at the time of surgery was 50.6 years (24-71). There were 7 males and 13 females. There were 4 open and 16 closed fractures. There were 7 Rüedi and Allgöwer (RA) Type 1, 9 Type 2 and 4 Type 3 fractures. The mean follow-up was 3.8 years [1-7]. The mean OMAS score was 54.3, reaching a peak at 2 years from injury. The mean QoL score (EQ5D5L) was 0.602, representing only 70 % of aged matched, UK population based norms. CONCLUSIONS: Whilst clinical outcomes are comparable with other studies, this report highlights this is a devastating injury, with most people taking 2 years to reach peak recovery. QoL outcome scores only reach 70 % normal and only 35 % of patients return to within 10 % of age matched population based norms.

Successful Reconstruction of Proximal Phalanx Condylar Fracture in an Athlete Using Auto-Osteochondral Graft from the Base of Fifth Metacarpus: A Case Report and Review of Literature.

Intra-articular fractures of the proximal phalanx head, especially with the condylar defect, are relatively rare but challenging for surgical treatment. Although several surgical procedures are available to reconstruct articular cartilage defects, the optimal method is unclear. This study reports a successful osteochondral reconstruction of proximal phalanx condylar defect in an athlete using the articular portion of the fifth metacarpal base.

Arthroscopic Assisted Reduction and Internal Fixation of Tibial Plateau Fractures by Viewing and Instrumentation Access Through Coexisting Meniscus Tear: Case Series.

Meniscus tear coexisting with tibial plateau fractures may be found in 2-49% of cases. Literature accepts that torn meniscus can be retracted towards the center to improve visualization of the peripheral plateau which is ordinarily concealed by the overlying meniscus. We hypothesized that easing in microscope through a coexisting tear may be much less disruptive with little or no adverse effects with respect to either the propagation of tear or its later repair. This strategy improved visualization as well as the extended reach of interventional instrumentation access to otherwise concealed areas of plateau and endoscopic trans-focal access to a vertical limb of fracture split on the anterior cortex of proximal tibia without any impact on the stability of repaired meniscus. The experience in a series of six cases is shared. Supplementary Information: The online version contains supplementary material available at 10.1007/s43465-022-00703-7.

3D printing in fracture treatment : Current practice and best practice consensus.

The use of 3D printing in orthopedic trauma is supported by clinical evidence. Existing computed tomography (CT) data are exploited for better stereotactic identification of morphological features of the fracture and enhanced surgical planning. Due to complex logistic, technical and resource constraints, deployment of 3D printing is not straightforward from the hospital management perspective. As a result not all trauma surgeons are able to confidently integrate 3D printing into the daily practice. We carried out an expert panel survey on six trauma units which utilized 3D printing routinely. The most frequent indications are acetabular and articular fractures and malalignments. Infrastructure and manpower structure varied between units. The installation of industrial grade machines and dedicated software as well as the use of trained personnel can enhance the capacity and reliability of fracture treatment. Setting up interdisciplinary jointly used 3d printing departments with sound financial and management structures may improve sustainability. The sometimes substantial logistic and technical barriers which impede the rapid delivery of 3D printed models are discussed.

[Preliminary finite element analysis of percutaneous screw fixation of Schatzker typeâ tibial plateau fracture].

OBJECTIVE: To compare the stress changes and displacement of SchatzkerⅠ tibial plateau fracture screw fixation model under different loads. METHODS: The three-dimensional CT images of the knee joint of a healthy male volunteer were selected to establish the three-dimensional model, and then the Schatzker I tibial plateau fracture model and screw fixation model were established. Simulate the two stress conditions of each model when standing on one foot and standing on two feet, the stress changes of tibia, split bone block and cannulated screw and the displacement between fractures were observed and compared. RESULTS: When standing on both feet, the model with the largest stress value of hollow screw, split bone block and tibia was the improved triangular support fixation model group, and the model with the largest displacement in the Z-axis direction of the overall model was the conventional screw fixation model group. When standing on one foot, the model with the largest stress value of hollow screw, split bone block and tibia was the improved triangular support fixation model group, and the model with the largest displacement in the Z-axis direction of the overall model was the conventional screw fixation model group. CONCLUSION: The lowest stress value of split bone block and screw is the palisade screw fixation model, and the largest is the improved triangular support fixation model. The Z-axis displacement of the conventional screw fixation model is the largest, and the displacement of the fence screw model is equivalent to that of the improved triangular support screw model.

An evaluation of the efficacy of percutaneous reduction and screw fixation without bone grafting in Sanders Type-II and Type-III displaced intra-articular calcaneal fractures.

BACKGROUND: The aim of this retrospective monocentric study was to investigate the clinical efficacy of percutaneous reduction and screw fixation without bone grafting in Sanders Type-II and Type-III displaced intra-articular calcaneal fractures (DIACFs). METHODS: The medical records of calcaneal fractures patients who were admitted to our department from January 2018 to January 2020 were retrospectively reviewed, and those meeting the inclusion criteria were fnally included for analysis. All patients were treated with percutaneous reduction and screw fixation, and no patients received bone grafting. The radiologic parameters evaluated included the BÖhler angle and the calcaneal height. In addition, the American Orthopaedic Foot and Ankle Society (AOFAS) hindfoot scores, Maryland Foot Score (MFS), and visual analog scale (VAS) score were determined. RESULTS: Thirty-eight patients with Sanders Type-II and Type-III DIACFs were finally included, including 30 males and 8 females aged 21 to 61 years [(42.6 ± 9.6) years]. According to the Essex-Lopresti classification, 27 of the fractures were the tongue type, and 11 were the joint compression type. According to the Sanders classification, 27 of the fractures were type II, and 11 were type III. Immediately postoperatively, the calcaneal height had recovered to 39.8 ± 2.1 mm, the BÖhler angle had recovered from 4.2° ± 13.6° preoperatively to 27.2° ± 3.4° (P = 0.000). All patients were followed up for 18-42 months [(25.2 ± 9.5) months]. All fractures healed. No differences were found in the outcome measures six-months postoperatively (BÖhler angle, p = 0.24; calcaneal height, p = 0.82) or at final follow-up (BÖhler angle, p = 0.33; calcaneal height, p = 0.28) compared to the immediately postoperative values. At the final follow-up, the AOFAS score was 91.7 ± 7.4 points, with an excellent and good rate of 92.1%; the MFS was 90.3 ± 7.8 points, with an excellent and good rate of 92.1%; and the VAS score was 2.2 ± 1.5 points. None of the patients had incision complications, and one patient developed traumatic arthritis. CONCLUSION: Percutaneous reduction and screw fixation without bone grafting in Sanders Type-II and Type-III DIACFs can achieve good recovery and maintenance of the BÖhler angle and calcaneal height. Moreover, it has the advantage of a low complication rate.

[3D printing in fracture treatment : Current practice and best practice consensus]. / 3D-Druck in der Frakturversorgung : Aktuelle Praxis und "Best-practice"-Konsens.

The use of 3D printing in orthopedic trauma is supported by clinical evidence. Existing computed tomography (CT) data are exploited for better stereotactic identification of morphological features of the fracture and enhanced surgical planning. Due to complex logistic, technical and resource constraints, deployment of 3D printing is not straightforward from the hospital management perspective. As a result not all trauma surgeons are able to confidently integrate 3D printing into the daily practice. We carried out an expert panel survey on six trauma units which utilized 3D printing routinely. The most frequent indications are acetabular and articular fractures and malalignments. Infrastructure and manpower structure varied between units. The installation of industrial grade machines and dedicated software as well as the use of trained personnel can enhance the capacity and reliability of fracture treatment. Setting up interdisciplinary jointly used 3d printing departments with sound financial and management structures may improve sustainability. The sometimes substantial logistic and technical barriers which impede the rapid delivery of 3D printed models are discussed.

ISOLATED CAPITELLAR FRACTURE FIXATION WITH HEADLESS SCREWS IN DIFFERENT CONFIGURATIONS.

Introduction: We evaluated the clinical and radiological outcomes of capitellar fractures treated with modified screw insertion (inserting the first fixation screw anteroposteriorly and the second screw posteroanteriorly), a technique that can be applied with a minimally invasive lateral elbow approach. Materials and Methods: Twenty-one isolated capitellum fractures that were surgically treated were included in the study. Fixation was achieved with two headless cannulated compression screws placed in anteroposterior and posteroanterior order using the modified lateral elbow approach. The Broberg-Morrey rating system was used to assess the post-operative functional status of the patients. Results: According to the Broberg-Morrey criteria, the mean score was 92.7 (77-100) and 13 cases had excellent, 7 had good, and 1 had fair results. None of the patients developed avascular necrosis or heterotopic ossification. According to the Broberg-Morrey arthrosis score, two cases had Grade 1 and one had Grade 2 arthrosis. One patient had a superficial wound site infection that was treated with antibiotics, and in one case a 60° extension loss was observed in the elbow. Conclusion: Treatment of isolated capitellar fractures with 2 headless screws placed anteroposteriorly and posteroanteriorly can provide stable fixation and is less traumatic for the elbow joint. Level of Evidence IV; Therapeutic Studies - Investigating the results of treatment.

Introdução: Avaliamos os resultados clínicos e radiológicos das fraturas do capítulo do úmero tratadas com a técnica de inserção de parafuso modificada (inserção do primeiro parafuso de fixação anteroposterior e do segundo parafuso posteroanterior), que pode ser aplicada com acesso lateral minimamente invasivo do cotovelo. Material e Método: Foram incluídas no estudo 21 fraturas isoladas do capítulo que foram tratadas cirurgicamente. A fixação foi obtida com dois parafusos de compressão canulados sem cabeça colocados em ordem anteroposterior e posteroanterior, usando acesso lateral modificado do cotovelo. O sistema de classificação Broberg-Morrey foi usado para avaliar o estado funcional pós-operatório dos pacientes. Resultados: De acordo com os critérios de Broberg-Morrey, o escore médio foi de 92,7 (77-100) e 13 casos foram excelentes, 7 bons e 1 regular. Nenhum paciente desenvolveu necrose avascular ou ossificação heterotópica. De acordo com o escore de artrose de Broberg-Morrey, dois casos tinham Grau 1 e um tinha artrose de Grau 2. Um paciente tinha infecção superficial da ferida, que foi tratada com antibióticos, e em um caso observou-se perda de 60° da extensão do cotovelo. Conclusão: O tratamento de fraturas isoladas do capítulo do úmero com 2 parafusos sem cabeça colocados anteroposterior e posteroanteriormente pode proporcionar fixação estável e é menos traumático para a articulação do cotovelo. Nível de evidência IV; Estudos terapêuticos - Investigação dos resultados do tratamento.

Use of a Box-cut Osteotomy Preserving Collateral Ligaments in Costal Osteochondral Graft Reconstruction of Proximal Interphalangeal Joint Cartilage Defects.

We report two patients with reconstruction of osteochondral defects of the proximal interphalangeal joint (PIPJ) using a costal osteochondral graft (COG). A box-cut osteotomy was done at the end of the phalanx preserving the lateral cortices and the insertion of the collateral ligaments. A COG was harvested from the rib, moulded and press fit into the groove formed by the box-cut osteotomy. The COG was fixed with mini screws in the coronal plane (dorsal to palmar) and the fixation off-loaded with an external fixator. This technique maintained the collateral ligament in-situ and is useful in reconstruction of chondral defects of the PIPJ. Level of Evidence: Level V (Therapeutic).

Long-Term Functional Outcomes and Complications of Intra-Articular (AO type B, C) Distal Humerus Fractures in Adults: A Retrospective Review.

Introduction Treatment of intra-articular fractures of the distal humerus is challenging due to their complexity, comminution, and associated complications. The evolution of surgical approaches and the design of elbow-specific implants over the last decades have failed to improve clinical and radiological outcomes. Studies are sparse regarding the long-term influence of surgical treatment of these types of fractures in the upper limb function. The purpose of the current study was to retrospectively review the long-term functional outcome and complications of all intraarticular (AO type B, C) distal humerus fractures treated surgically in a university hospital during the last 25 years. Material and methods The study included patients who were surgically treated for an intra-articular distal humerus fracture between March 1991 and May 2016. Our initial search, using ICD-10 codes, identified 63 patients in the specific time period. Twelve patients had died, nine declined to participate, eight had emigrated, nine could not be located and one patient was excluded as he suffered from quadriplegia unrelated to the initial injury. The remaining 25 patients (mean age at surgery 44.2±19.67) were included in a follow-up study protocol. Functional outcome was evaluated according to Mayo Elbow Performance Score (MEPS), Oxford Elbow Score (OES), and the Quick Disabilities of the Arm, Shoulder and Hand questionnaire (QuickDASH). Pain was assessed using the Numerical Pain Rating Scale (NPRS) and subjects were asked to rate their satisfaction. Perioperative and late complications were recorded as well. Results The average follow-up was 158.16 ± 73.73 months. The average score was 89.4 ± 12.36 for MEPS, 42.68 ± 4.03 for OES, and 8.1 ± 15.38 for the QuickDASH. The patient satisfaction was rated 3.8 ± 1.08 on average. The mean flexion of the affected elbow was 137.6 ± 12.68 degrees while extension deficit was present in 14/25 patients, with a mean of 8.6 ± 8.96 degrees. We did not observe any mal- or non-unions. The re-operation rate was 32% primarily due to stiffness and irritation from the hardware. We noticed one spontaneously resolved ulnar nerve palsy, one combined radial, and ulnar nerve palsy after extensive arthrolysis that also resolved two cases of heterotopic ossification, one case of implant failure, and two cases of infection - one superficial, which was managed with antibiotics, and the other was deep managed with surgical drainage. Conclusions In our series, we found a satisfying range of motion, good functional outcome, and adequate ability to perform daily activities at a very long follow-up. Posttraumatic arthritis, whenever present, does not seriously affect functional performance. Level of evidence: IV.

A New Technique of Fixing Intra-articular Fractures of the Distal Humerus without Exposing the Ulnar Nerve by Posterior Approach.

Introduction: Distal humerus fractures constitute around 0.2 to 7% of all fractures, 30% of all humerus fractures, most common in young adults, are due to high energy trauma and in old age due to osteoporosis. A common step in all currently available approaches is to identify the ulnar nerve, expose, mobilise, and retract this from its surrounding bed or in situ release. Ulnar neuropathy is either observed immediately after surgery or delayed up to one year after surgery. We are describing a new posterior approach for intra-articular distal humerus fractures, where identification and retraction of the ulnar nerve are not required to fix the intra-articular fractures of the distal humerus, thereby avoiding injury to the ulnar nerve. Material and Methods: Seven patients with AO type B and C were treated using our new ulnar nerve-sparing approach between January 2017 and December 2019. Postoperatively, all the patients have been examined for ulnar neuropathy symptoms. Results: We have no ulnar nerve neuropathy either in the post-operative period or at 2 years follow-up (five cases were followed up for 2 years and two patients lost to follow-up after 6 months). At the end of 2 years, the mean range of motion achieved at elbow was 134°. The mean oxford elbow score was 45.2 (42-47). Heterotopic ossification and infection were not found in our cases. Conclusion: Our ulnar nerve-sparing approach for intra-articular fractures of distal third humerus by posterior approach helps in fixing articular fractures of distal humerus without exposing ulnar nerve during surgery without compromising on the exposure of fracture for fixation, thus reducing the chances of ulnar nerve injury and post-operative neuropathy.

Isolated capitellar fracture fixation with headless screws in different configurations / Fixação de fratura isolada do capítulo do úmero com parafusos sem cabeça em diferentes configurações

ABSTRACT Introduction We evaluated the clinical and radiological outcomes of capitellar fractures treated with modified screw insertion (inserting the first fixation screw anteroposteriorly and the second screw posteroanteriorly), a technique that can be applied with a minimally invasive lateral elbow approach. Materials and Methods Twenty-one isolated capitellum fractures that were surgically treated were included in the study. Fixation was achieved with two headless cannulated compression screws placed in anteroposterior and posteroanterior order using the modified lateral elbow approach. The Broberg-Morrey rating system was used to assess the post-operative functional status of the patients. Results According to the Broberg-Morrey criteria, the mean score was 92.7 (77-100) and 13 cases had excellent, 7 had good, and 1 had fair results. None of the patients developed avascular necrosis or heterotopic ossification. According to the Broberg-Morrey arthrosis score, two cases had Grade 1 and one had Grade 2 arthrosis. One patient had a superficial wound site infection that was treated with antibiotics, and in one case a 60° extension loss was observed in the elbow. Conclusion Treatment of isolated capitellar fractures with 2 headless screws placed anteroposteriorly and posteroanteriorly can provide stable fixation and is less traumatic for the elbow joint. Level of Evidence IV; Therapeutic Studies - Investigating the results of treatment.

RESUMO Introdução Avaliamos os resultados clínicos e radiológicos das fraturas do capítulo do úmero tratadas com a técnica de inserção de parafuso modificada (inserção do primeiro parafuso de fixação anteroposterior e do segundo parafuso posteroanterior), que pode ser aplicada com acesso lateral minimamente invasivo do cotovelo. Material e Método Foram incluídas no estudo 21 fraturas isoladas do capítulo que foram tratadas cirurgicamente. A fixação foi obtida com dois parafusos de compressão canulados sem cabeça colocados em ordem anteroposterior e posteroanterior, usando acesso lateral modificado do cotovelo. O sistema de classificação Broberg-Morrey foi usado para avaliar o estado funcional pós-operatório dos pacientes. Resultados De acordo com os critérios de Broberg-Morrey, o escore médio foi de 92,7 (77-100) e 13 casos foram excelentes, 7 bons e 1 regular. Nenhum paciente desenvolveu necrose avascular ou ossificação heterotópica. De acordo com o escore de artrose de Broberg-Morrey, dois casos tinham Grau 1 e um tinha artrose de Grau 2. Um paciente tinha infecção superficial da ferida, que foi tratada com antibióticos, e em um caso observou-se perda de 60° da extensão do cotovelo. Conclusão O tratamento de fraturas isoladas do capítulo do úmero com 2 parafusos sem cabeça colocados anteroposterior e posteroanteriormente pode proporcionar fixação estável e é menos traumático para a articulação do cotovelo. Nível de evidência IV; Estudos terapêuticos - Investigação dos resultados do tratamento.

Stabilization of dorsal intra-articular fragment in distal radius fracture after volar locking plate fixation / 中华创伤骨科杂志

Objective:To explore the risk factors that may affect the stabilization of dorsal intra-articular fragment in distal radius fracture after volar internal fixation.Methods:A retrospective analysis was performed of the patients with distal radius fracture who had been treated by volar internal fixation at Department of Traumatic Orthopedics, Tongji Hospital Affiliated to Tongji University from July 2016 to July 2020. After 3D reconstruction of their preoperative CT scans by software Mimics 20.0, 66 patients with a dorsal intra-articular fragment were screened out. They were 31 males and 35 females, aged from 23 to 78 years (average, 53.4 years). By the AO classification, there were 17 case of type C1, 22 cases of type C2, and 27 cases of type C3. The displacement of dorsal intra-articular fragment was judged by X-ray observation on postoperative day 2 and X-ray follow-up at the outpatient department. The 13 patients with displacement of dorsal intra-articular fragment>2 mm were assigned into a displacement group while the other 53 ones into a displacement-free group. The 2 groups were compared in terms of preoperative general data and anatomical data of the dorsal intra-articular fragment (total preoperative displacement, radius-ulnar length, dorsal-volar length, aspect ratio, proximal-distal length and volume) to analyze the correlations between them and displacement.Results:There was no significant difference in preoperative general data (age, gender, affected side, cause of injury or AO classification) between the 2 groups, showing comparability between groups ( P>0.05). All patients were followed up for 6 to 24 months (mean, 14 months) after surgery. There were no postoperative complications like neurovascular lesion or infection. None of the patients in the displacement group underwent revision surgery, and the fractures healed successfully during the postoperative follow-up. The total preoperative displacement in the displacement group was(10.0±1.3) mm, significantly larger than that in the displacement-free group [(7.8±1.5) mm]; the radius-ulnar length in the displacement group was (8.2±1.3) mm, significantly shorter than that in the displacement-free group [(10.8±2.3) mm]; the aspect ratio of the fragment in the displacement group was 1.2±0.2, significantly lower than that in the displacement-free group (1.4±0.2); the fragment volume in the displacement group was (690.5± 201.4) mm 3, significantly smaller than that in the displacement-free group [(995.8±295.0) mm 3]. There were significant differences in the above items between the 2 groups ( P<0.05). Conclusion:The total preoperative displacement, radius-ulnar length, aspect ratio and volume of a dorsal intra-articular fragment are important factors which may affect the displacement of the dorsal fragment after volar internal fixation.