Comparison of the biomechanical behavior between commercial and 3D-printed patient-specific Ti6Al4V L-Shaped titanium plates following le fort i osteotomy using finite element analysis: A technical Note.

OBJECTIVE: To evaluate and compare the biomechanical behavior of three-dimensionally (3D) printed patient-specific Ti6Al4V with commercially made titanium mini plates following Lefort-I osteotomy using finite element analysis. METHODS: Le Fort I osteotomy was virtually simulated with a 5 mm maxillary advancement and mediolateral rotation in the coronal plane, resulting in a 3 mm gap on the left side's posterior. Two fixation methods were modeled using software to compare 3D-printed Ti6Al4V and commercial titanium mini plates, both featuring a 4-hole l-shape with thicknesses of 0.5 mm and 0.7 mm at the strategic piriform rim and zygomaticomaxillary buttress locations. Using ANSYS R19.2, finite element models were developed to assess the fixation plates and maxilla's stress, strain, and displacement responses under occlusal forces of 125, 250, and 500 N/mm². RESULTS: This comparative analysis revealed slight variation in stress, strain, and displacement between the two models under varying loading conditions. Stress analysis indicated maximum stress concentrations at the vertical change in the left posterior area between maxillary segments, with the Ti6Al4V model exhibiting slightly higher stress values (187 MPa, 375 MPa, and 750 MPa) compared to the commercial titanium model (175 MPa, 351 MPa, and 702 MPa). Strain analysis showed that the commercial titanium model recorded higher strain values at the bending area of the l-shaped miniplate. Moreover, displacement analysis revealed a maximum of 3 mm in the left posterior maxilla, with the Ti6Al4V model demonstrating slightly lower displacement values under equivalent forces. CONCLUSION: The maximum stress, strain, and segment displacement of both fixation models were predominantly concentrated in the area of the gap between the maxillary segments. Notably, both fixation models exhibited remarkably close values, which can be attributed to the similar design of the fixation plates.

Recommendations to minimize tooth root remodeling in patients undergoing maxillary osteotomies.

The purpose of this study was to report root remodeling/resorption percentages of maxillary teeth following the different maxillary osteotomies; i.e. one-piece, two-pieces, three-pieces Le Fort I, surgically assisted rapid palatal expansion (SARPE). The possibility of relationships between root remodeling and various patient- and/or treatment-related factors were further investigated. A total of 110 patients (1075 teeth) who underwent combined orthodontic and orthognathic surgery were studied retrospectively. The sample size was divided into: 30 patients in one-piece Le Fort I group, 30 patients in multi-pieces Le Fort I group, 20 patients in SARPE group and 30 patients in orthodontic group. Preoperative and 1 year postoperative cone beam computed tomography (CBCT) scans were obtained. A validated and automated method for evaluating root remodeling and resorption in three dimensions (3D) was applied. SARPE group showed the highest percentage of root remodeling. Spearman correlation coefficient revealed a positive relationship between maxillary advancement and root remodeling, with more advancement contributing to more root remodeling. On the other hand, the orthodontic group showed a negative correlation with age indicating increased root remodeling in younger patients. Based on the reported results of linear, volumetric and morphological changes of the root after 1 year, clinical recommendations were provided in the form of decision tree flowchart and tables. These recommendations can serve as a valuable resource for surgeons in estimating and managing root remodeling and resorption associated with different maxillary surgical techniques.

Stability between single and segmental maxillary osteotomies in bimaxillary surgery for cleft-associated class III deformity: a CBCT study.

OBJECTIVE: Segmental Le Fort I osteotomy through the cleft is a common strategy to narrow the alveolar cleft in adults. This study compared skeletal stability between single and segmental Le Fort I osteotomies in patients with unilateral cleft lip and palate (UCLP). MATERIALS AND METHODS: This retrospective analysis examined 45 adults with complete UCLP-associated class III deformities who underwent bimaxillary surgery with either single (n = 30) or segmental (n = 15) Le Fort I advancement. Cone beam computed tomography (CBCT) scans of the facial skeleton were acquired before surgery, 1-week postsurgery, and at follow-up. Measures of landmarks from the CBCT images for the two treatment groups were compared for translation (left/right, posterior/anterior, superior/inferior) and rotation (yaw, roll, pitch). RESULTS: Postsurgery, the downward movement of the maxilla was larger in the segmental group than the single group. At follow-up, the maxilla moved backward in both groups, and upward in the segmental group. The mandible moved forward and upward and rotated upward in both groups. The amount of upward movement and rotation was larger in the segmental group than the single group. CONCLUSIONS: Two years after bimaxillary surgery in patients with UCLP-associated class III deformity, greater relapse was found after segmental Le Fort I osteotomies in vertical translation of the maxilla and mandible, and pitch rotation of the mandible compared with single Le Fort I osteotomies. CLINICAL RELEVANCE: The vertical relapse of the maxilla was larger after segmental Le Fort I advancement compared with single Le Fort I advancement in clefts.

The Use of Clear Aligners in Multi-Segmental Maxillary Surgery: A Case-Control Study in Cleft Lip and Palate and Skeletal Class III Patients.

Background: Maxillary hypoplasia and mandibular asymmetry may be corrected with orthognathic surgery after growth completion. For most stable results, some cases may require segmental Le Fort I osteotomies. Unfortunately, Invisalign's software (6.0 version) still has some inherent limitations in predicting outcomes for complex surgeries. This study explores the potential of aligners, particularly in multiple-piece maxillary osteotomies in both cleft and non-cleft patients. Method: Thirteen patients who underwent pre-surgical treatment with Invisalign were retrospectively matched in terms of diagnosis, surgical procedure, and orthodontic complexity with thirteen patients treated using fixed appliances. Virtual curves following the lower arch were employed to guide the correct pre-surgical positions of the upper teeth with a simple superimposition technique. The amount of impressions required in both groups to achieve satisfactory pre-surgical alignment of the segmented arches was compared. Results: one or no refinement phases were needed in the Invisalign group to reach an acceptable pre-surgical occlusion, while the amount of pre-surgical impressions needed to reach adequate coordination with fixed appliance treatment was slightly higher (p > 0.05). Conclusions: it appears that clear aligner could serve as an effective treatment for individuals necessitating segmental Le Fort I osteotomies when aided by the suggested simple superimposition approach.

Maxillary bone healing and CT value after Le Fort I osteotomy using absorbable plate system: A retrospective study.

This study aimed to evaluate maxillary bone healing and computed tomography (CT) values after Le Fort I osteotomy with sagittal split ramus osteotomy in patients with class II and III malocclusion. Four absorbable plates and screws were used to fix the maxillary segments in all patients. For 112 sides (58 patients), the bone defect areas at the anterior and posterior sites between the maxillary segments were measured using 3-dimensional CT views reconstructed over a constant CT value at 1 week and 1 year postoperatively. Subsequently, CT values at the upper, middle, and lower sites around the osteotomy line in the medial, middle, and lateral regions were measured. The bone defect area after 1 year increased at the anterior site in class III and at both the anterior and posterior sites in class II (P < 0.05). This study suggests that the increase in bone defect area was affected by lower CT values at the middle site of the middle and lateral regions in class II, and that bony defects between fragments in the maxilla could partially remain in both classes II and III within 1 year after Le Fort I osteotomy.

Change in taste sensation after orthognathic surgery.

OBJECTIVE: The objective of this study was to evaluate the effect of orthognathic surgery on taste sensation. MATERIALS AND METHODS: Thirty-five patients scheduled to undergo Le Fort I osteotomy (LFIO), sagittal split ramus osteotomy (SSRO), and bimaxillary surgery (BMS) were evaluated by administering localized and whole-mouth taste tests preoperatively and postoperatively at months 1, 3, and 6. The patients were asked to identify the quality of four basic tastes applied to six locations on the palate and tongue and to rate the taste intensities they perceived. Taste recognition thresholds and taste intesity scores were evaluted according to operation groups and follow-ups. RESULTS: There were significant decreases in the quinine HCl recognition thresholds at the postoperative follow-ups compared to the preoperative in LFIO patients (p = 0.043). There were significant decreases in sucrose taste intensity scores in the right posterolateral part of the tongue at months 3 and 6 compared to preoperative in SSRO patients (p = 0.046), and significant increases in quinine HCL taste intensity scores in the right and left anterior parts of the tongue at month 6 compared to preoperative in LFIO patients (p < 0.05). CONCLUSION: Taste perception is affected due to potential damage to the chemosensory nerves during orthognathic surgical procedures. Generally, non-significant alterations have been observed in taste perception after orthognathic surgery, except for significant alterations in bitter and sweet taste perceptions. CLINICAL RELEVANCE: Maxillofacial surgeons should be aware of taste perception change after orthognathic surgery procedures and patients should be informed accordingly. THE TRIAL REGISTRATION NUMBER (TRN): NCT06103422/Date of registration: 10.17.2023 (retrospectively registered).

Can different osteotomies have an influence on surgically assisted rapid maxillary expansion? A systematic review.

The purpose of this study was to systematically review the randomized and non-randomized clinical trials (RCT; nRCT) concerning the different available osteotomies for surgically assisted rapid maxillary expansion (SARME): pterygomaxillary disjunction (SARME + PD vs SARME-PD) and segmental Le Fort I osteotomy (2-piece vs 3-piece). Outcomes focused on skeletal, dental, upper airway changes, complications, and relapse. Two authors investigated five databases (PubMed, Cochrane Library, Google Scholar, Scopus, Web of Science) until August 2023. The Cochrane Collaboration Tool and the Newcastle-Ottawa scale were used for the quality assessment of the included RCTs and nRCTs, respectively. A total of 554 articles were retrieved and after duplicates removing and full-text reading, 40 studies were included. Two RCTs showed a low risk of bias, one an unclear risk and one a high risk. Among the non-RCTs, 15 studies showed a good quality, while 21 exhibited a fair quality score. SARME + PD resulted in more homogeneous posterior bone expansion, with minimal dental effects. No difference between 2-piece and 3-piece in asymmetric expansion was observed, although 3SO showed 1-2 mm of more transverse increase. The oropharynx minimum cross-sectional area, the nasopharynx and the oropharynx volume were greater in SARME + PD. Both dental and bone relapse can occur but no differences between the groups were observed. All osteotomies guaranteed a correction of transverse maxillary deficiency. Lower side effects were described in SARME + PD. Two-piece and 3-piece segmental Le Fort I osteotomies did not show any differences in the symmetry and amount of expansion.

Comprehensive analysis of lateral nasal wall anatomy to optimize the osteotomy in different skeletal patterns.

PURPOSE: Variations in nasal wall anatomy are crucial in patients with dentofacial deformities undergoing Le Fort I osteotomy. These structural variations heighten the potential for complications during surgical procedures. Hence, the study focused on evaluating the differences in the lateral nasal wall anatomy across different skeletal Classes. METHODS: This study evaluated 86 patients aged 18-43 years with different skeletal Classes. In the axial images acquired from coronal sections, two angulations and the linear distances of the lateral nasal wall were measured in Class I, II, and III patients. The measurement between the piriform opening and the most anterior point of the greater palatine foramen was evaluated in three parts regarding the osteotomy line. Differences between the skeletal patterns were analyzed using an independent sample t-test and Mann-Whitney U test with a significance level of 0.05. The intra-class correlation coefficient was calculated for inter-observer and intra-observer agreement. RESULTS: There was a statistically significant difference between Class I and Class II subjects regarding the anterior lateral nasal wall (p = 0.011) and anterior nasal thickness (a) (0.004). There was a significant difference between Class I and Class III patients regarding anterior nasal thickness (a) (p < 0.001) and total lateral nasal wall length (p < 0.001). CONCLUSION: For instance, the measurements of Class III and Class II patients were relatively different from those of the Class I patients. Therefore, preoperative Cone-Beam Computed Tomographic analysis should be performed for each patient prior to Le Fort I osteotomy to ensure that the procedure is performed safely.

Simultaneous standard total joint prosthesis reconstruction with SSRO and Le Fort I osteotomy in the treatment of unilateral temporomandibular joint ankylosis with jaw deformity: a case cohort study.

OBJECTIVE: Unilateral temporomandibular joint ankylosis with jaw deformity (UTMJAJD) may require simultaneous total joint prosthesis (TJP) reconstruction, sagittal split ramus (SSRO), and Le Fort I osteotomies. The purpose of this study was to evaluate outcomes in patients treated with these procedures. METHODS: Patients diagnosed UTMJAJD between 2016 and 2018 were selected for the study. Mandible-first procedure was performed after ankylosis release with TJP on the ankylosed side and SSRO on the contralateral side. Le Fort I osteotomy with and without genioplasty was lastly performed. Maximal incisor opening (MIO), facial symmetry, and jaw and condyle stability were compared before, after operation, and during follow-ups. RESULTS: Seven patients were included in the study. Their average chin deviation was 9.5 ± 4.2 mm, and maxillary cant was 5.1 ± 3.0°. After operation, jaw deformity significantly improved, with chin deviation corrected 7.6 ± 4.1 mm (p = 0.015) and advanced 5.9 ± 2.5 mm (p = 0.006). After an average follow-up of 26.6 ± 17.1 months, MIO significantly increased from 11.4 ± 9.3 to 35.7 ± 2.6 mm (p = 0.000). The occlusion was stable with no significant positional or rotational changes of the jaw (p > 0.05). There was no obvious condylar resorption during follow-ups. CONCLUSION: Simultaneous TJP reconstruction, SSRO, and Le Fort I osteotomy are reliable and effective methods for the treatment of UTMJAJD.

Effects of Maxillary Movements on Lips Following Orthognathic Surgery: A Retrospective Non-Randomized Clinical Trial.

Introduction Lips play a fundamental role in facial attractiveness and in decisions pertaining to orthognathic surgery. Objective To assess the upper lip changes following Le Fort I osteotomy for maxillary advancement and/or impaction. Methods In the present retrospective non-randomized clinical trial, we evaluated 3 groups of patients who underwent Le Fort I osteotomy of the maxilla. Group 1 (n = 35) underwent maxillary advancement, group 2 (n = 14), maxillary impaction, and group 3 (n = 11) was submitted to both maxillary advancement and impaction. The lip thickness of all patients was measured preoperatively, and the participants in each group were categorized into two subgroups: thin (< 12 mm) and thick (> 12 mm) lip. The primary (before orthognathic surgery) and final (after orthodontic bracket removal) lateral cephalograms of the patients were analyzed using the Dolphin software. Comparisons were made using the paired t -test and linear regression in the IBM SPSS Statistics for Windows software. Results The length of the upper lip increased by 1 mm ( p = 0.012) on average following maxillary advancement, and it decreased by 0.43 mm ( p = 0.24) on average following maxillary impaction. In the maxillary advancement group, the change in angulation of the incisors predicted the incisal display ( p = 0.03). In the maxillary impaction group, skeletal changes in the vertical dimension predicted changes in upper lip length ( p = 0.033). Conclusions Le Fort I osteotomy for maxillary advancement significantly increases the length of the upper lip. The assessment of lip thickness prior to surgery can help predict the postoperative results. Changing the angulation of the incisors can predict the incisal display. In maxillary impaction, skeletal changes in the vertical dimension can predict the changes in the length of the upper lip.

Assessment of temporomandibular joint disc position and skeletal stability after bimaxillary surgery.

PURPOSE: This study aimed to assess the correlation between temporomandibular joint (TMJ) disc position and skeletal stability and identify the cephalometric measurements associated with relapse after bimaxillary surgery. METHODS: The participants were 62 women with jaw deformities (124 joints) who underwent bimaxillary surgery. The TMJ disc position was classified into four types (anterior disc displacement (ADD), anterior, fully covered, and posterior) using magnetic resonance imaging, and cephalometric analysis was performed preoperatively and 1 week and 1 year postoperatively. The differences between pre- and 1-week postoperative values (T1) and 1-week and 1-year postoperative value (T2) were calculated for all cephalometric measurements. Moreover, the relationship between skeletal stability using cephalometric measurements, skeletal class, and TMJ disc position was analyzed. RESULTS: The participants included 28 patients in class II and 34 in class III. There was a significant difference in T2 in SNB between class II mandibular advancement cases and class III mandibular setback cases (P = 0.0001). In T2, in ramus inclination, there was a significant difference between the ADD and posterior types (P = 0.0371). Stepwise regression analysis revealed that T2 was significantly correlated with T1 for all measurements. However, the TMJ classification was not applied to all measurements. CONCLUSION: This study suggested that TMJ disc position, including ADD, could not affect skeletal stability, including the maxilla and distal segment after bimaxillary osteotomy, and short-term relapse could be related to the movement amount or angle change by surgery for all measurements.

Chronic Rhinosinusitis After Maxillary Advancement Orthognathic Surgery.

INTRODUCTION: Maxillomandibular advancement (MMA) remains an effective procedure for the management of obstructive sleep apnea (OSA). Maxillary advancement may lead to anatomical changes that impair paranasal sinus drainage, leading to chronic sinus inflammation. The aim of this study was to describe the clinical features and outcomes of patients suffering from chronic rhinosinusitis (CRS) following MMA. METHODS: This is a retrospective case series study. Our study included subjects diagnosed with CRS following MMA from January 1992 to October 2018 at Stanford Hospital. We screened 730 patients undergoing MMA and identified a total of 57 with CRS after MMA. A descriptive analysis was performed using clinical data including patient demographics, comorbidities, prior surgical history, physical exam manifestations, CT findings, and quality of life outcomes (SNOT-22). RESULTS: Out of 730 patients undergoing MMA, 57(7.8%) were found to have CRS after orthognathic surgery. Presenting symptoms included facial pain (92.5%), nasal drainage (75%), nasal obstruction (67.5%), and hyposmia (20%). Endoscopic examination revealed recirculation (30.5%), purulent discharge (27.7%), polypoid changes (22.2%), and scarring (13.8%). Preoperative CT prior to undergoing endoscopic sinus surgery (ESS) demonstrated mucosal thickening in maxillary (64.2%), anterior ethmoid (39.2%), frontal (14.2%), posterior ethmoid (10.7%), sphenoid sinus (14.2%), and ostiomeatal complex (55.3%). Average Lund-Mackay score was 5.5(±3.8). Additional CT findings included secondary ostium in the inferior meatus (42.8%). Forty patients (70.1%) underwent ESS at a mean of 4.6 years after MMA. Patients undergoing ESS experienced significant improvement in SNOT-22 scores at 12-months post-surgery (P = .018). CONCLUSION: Patients undergoing maxillary advancement surgery are at risk of developing CRS postoperatively and should be advised of the risk of CRS associated with this procedure. Surgical treatment can be an option for medically refractory CRS related to MMA surgery.

Effects of Maxillary Movements on Lips Following Orthognathic Surgery: A Retrospective Non-Randomized Clinical Trial

Abstract Introduction Lips play a fundamental role in facial attractiveness and in decisions pertaining to orthognathic surgery. Objective To assess the upper lip changes following Le Fort I osteotomy for maxillary advancement and/or impaction. Methods In the present retrospective non-randomized clinical trial, we evaluated 3 groups of patients who underwent Le Fort I osteotomy of the maxilla. Group 1 (n = 35) underwent maxillary advancement, group 2 (n = 14), maxillary impaction, and group 3 (n = 11 ) was submitted to both maxillary advancement and impaction. The lip thickness of all patients was measured preoperatively, and the participants in each group were categorized into two subgroups: thin (< 12 mm) and thick (> 12 mm) lip. The primary (before orthognathic surgery) and final (after orthodontic bracket removal) lateral cephalograms of the patients were analyzed using the Dolphin software. Comparisons were made using the paired t-test and linear regression in the IBM SPSS Statistics for Windows software. Results The length of the upper lip increased by 1 mm (p = 0.012) on average following maxillary advancement, and it decreased by 0.43 mm (p = 0.24) on average following maxillary impaction. In the maxillary advancement group, the change in angulation of the incisors predicted the incisal display (p = 0.03). In the maxillary impaction group, skeletal changes in the vertical dimension predicted changes in upper lip length (p = 0.033). Conclusions Le Fort I osteotomy for maxillary advancement significantly increases the length of the upper lip. The assessment of lip thickness prior to surgery can help

A 3D dynamic finite element analysis of biomechanical behaviour of maxilla and fixative appliances following advancement Le Fort I surgery applied in different lengths.

OBJECTIVES: Dynamic analysis of chewing impact on the stability of rigid fixation techniques following Le Fort I osteotomy has not been investigated in the previous literature. The aim of the present study was to evaluate segmental displacement and von Mises (VM) stress values on the fixation devices following different amounts of Le Fort I advancements under dynamic loading conditions. MATERIALS AND METHODS: The 3D finite element models simulating 3, 5 and 8 mm advancement of maxilla at the Le Fort I level were generated using CBCT scan data. The models included two anterior L plates and two posterior I plates fixations bilaterally. Dynamic finite element analysis was performed to evaluate their biomechanical behavior against chewing cornflakes bio. Von Mises stresses and displacement values on three points were calculated. RESULTS: Calculations were made in a time of 38, 40 and 40.5 ms for 3, 5 and 8 mm advancement models, respectively. As the advancement increased, stress values on the plates and displacement values in the D1 (intersection of the apex of the canine tooth with the osteotomy line), D2 (the most prominent point of zygomatic buttress on the osteotomy line), and D3 (intersection of the midline of the second molar tooth with the osteotomy line) points increased. The lowest stress and displacement values were found in the 3 mm advancement model. As advancement increased, the highest values were found in the I plates. The stress levels on the plates and screws remained within safe limits. CONCLUSIONS: The von Mises stresses and displacement values tend to increase in according with the amount of advancement. More stress is transferred to posterior I plates and screws under dynamic forces.

Assessment of Nasal Septum Change after Le Fort I Osteotomy Using Cone Beam Computed Tomography.

Objective: Le Fort I osteotomy (LF-IO) is widely used for the correction of dentofacial deformities, which may cause changes in the postoperative nasal septum (NS). The objective of this study was to evaluate the effects of LF-IO on the NS deviation and to determine whether the NS was affected by differences in the direction of maxilla movement. Materials and Methods: A retrospective study including 57 patients who underwent LF-IO and received cone beam computed tomography (CBCT) preoperatively and 6-12 months postoperative evaluation was performed. The NS angle of each patient was measured both pre- and postoperatively in the two coronal sections (nasion and ostium levels). The patients were divided into five paired groups and calculated. Group 1 to 4 were divided depending on the differences in the direction of maxilla movement (Group 1. Impaction ≥ 5 mm vs. Impaction < 5 mm; Group 2. Anterior movement vs. Non-anterior movement; Group 3. Impaction symmetry vs. Impaction asymmetry; and Group 4. Impaction vs. Inferior repositioning). Group 5 was divided as One-piece osteotomy vs. Multi-segmental osteotomy. Results: The mean NS angles at both nasion and ostium levels of all patients were significant increased after LF-IO. However, there were no statistical significant differences of the five paired groups. Conclusions: LF-IO osteotomy influenced increasing of the NS deviation at both the nasion and ostium levels. However, differences in the direction of the maxilla movement and maxilla segmentation showed no statistically significant changes.

Postoperative hemorrhage after Le Fort I osteotomy hemostasis with angiographic embolization: report of two cases.

This study reported two cases of acute life-threatening hemorrhage after Le Fort I osteotomy. In both cases, computed tomography and angiography revealed damage to the descending palatine artery, which was successfully treated by angiographic embolization. Although massive hemorrhage after Le Fort I osteotomy is rare, acute hemorrhage from the postoperative area may occur. Angiographic embolization is useful in cases of such hemorrhage from the posterior nasal cavity where endoscopic hemostasis is not possible.

Sequencing in Orthognathic Bimaxillary Surgery: Which Jaw Should Be Operated First? A Scoping Review.

Bimaxillary orthognathic surgery is widely used for the correction of dentoskeletal deformities. Surgery sequencing (maxilla or mandible first) remains debated, and guidelines and consensus are lacking. This scoping review summarizes the state of the art and compares the advantages and disadvantages of both approaches. The review was conducted following PRISMA-ScR guidelines. Three electronic databases (PubMed, Scopus, Web of Science) were searched using the PICO protocol and key words in orthognathic surgical sequencing. Four reviewers screened the records independently, and disagreement was resolved by consensus. A total of 23 records met the inclusion criteria. The advantages and disadvantages of the two approaches were compared and assessed for accuracy of reporting. Within the limitations of the present study, available evidence for the intrinsic advantages and the accuracy of the mandible-first sequence supports the choice of this approach in most cases. Nevertheless, each clinical case needs to be evaluated individually, as no dogmatic recommendations can be given for sequencing in bimaxillary orthognathic surgery.

Iatrogenic Arteriovenous Fistula between the Middle Meningeal Artery and Pterygoid Venous Plexus Secondary to a Le Fort I Osteotomy: A Case Report.

Le Fort I osteotomy is a common surgical technique for correcting jaw deformities. Although it is generally a safe procedure, there have been cases of postoperative vascular complications, which include arteriovenous fistulas. Published reports describe the development of arteriovenous fistulas that originate from the maxillary artery after this procedure; nevertheless, no cases of arteriovenous fistulas arising from the middle meningeal artery (MMA) have been reported. We present the case of a 19-year-old woman who developed pulsatile tinnitus immediately following a Le Fort I osteotomy. Angiography with proximal flow control of the external carotid artery showed an arteriovenous fistula between the extracranial portion of the MMA and the pterygoid venous plexus. The fistula was successfully treated using coil embolization, preserving the maxillary artery, which results in tinnitus resolution. In this report, the effectiveness of endovascular treatment for arteriovenous fistulas of the MMA that occur following a Le Fort I osteotomy was demonstrated. Angiography with proximal flow interruption was effective in shunt location detection.

Comparative evaluation of use of reciprocating saw and bur in Le fort I osteotomy for superior repositioning of maxilla: A cross-sectional study.

Background: Traditionally bur has been used to carry out osteotomy. In a developing country like India, the cost of surgical treatment is the important factor in determining treatment plan. Although the use of bur is cost-effective and efficient, with the advent of newer technology, it is getting replaced with a saw. Aim: To evaluate and compare the use of reciprocating saw and bur in Le Fort I Osteotomy for superior repositioning of the maxilla. Materials and Methods: Patients referred from the Department of Orthodontics for the surgical correction of vertical maxillary excess (VME). They were divided into two groups. In group I, osteotomy was performed with Synthes Reciprocating Saw and in group II, bur was used. The parameters recorded in both the groups were time required for the completion of down-fracture, precision of the osteotomy cut (margins of the cut), and ease of superior repositioning. Data was collected from both the groups for comparison. Results: A total of 14 patients with VME were included in the study. They were divided into two groups. Seven study participants were allotted to each group. In group I, Synthes Reciprocating Saw was used while in group II, a bur was used to carry out the osteotomy cut. In group I, the average time required to complete the down-fracture of the maxilla was 3.5-4 min while in group II it was more than 8 min. The margins of the osteotomy cut were smooth and regular and there was bone-to-bone contact during superior repositioning in Group I. Conclusion: The combination of the use of a saw for inferior osteotomy and a bur for the superior cut would be more beneficial in the superior repositioning of the maxilla.