Strain Measurement during Quasi-Static and Cyclic Loads in AL-6XN Material Using Digital Image Correlation Technique.

A customized digital image correlation (DIC) system was implemented to monitor the strain produced in a cold-rolled AL-6XN stainless steel plate, 3.0 mm thick, subjected to quasi-static and cyclic loading tests. A comparison of the DIC strain measurements was made against those provided by conventional extensometers. Furthermore, the DIC system was used to monitor the fatigue crack initiation in low-cycle fatigue tests. The true stress-strain behavior for the AL-6XN material was properly captured by the DIC measurements. For low-cycle fatigue tests (strain control), the strain mapping generated by DIC allowed for identifying zones with higher strain than the nominal strain amplitude applied (εa) since the first stages of the fatigue life (FL). These zones become potential fatigue crack initiation sites.

Immediate functional loading of implant-supported mandibular prostheses with customized UCLA'S attachments with distal extension: A case report.

Implant-supported complete dentures are a common procedure for patients with mandibular edentulism problems. This article documents the protocol for immediate functional loading of fixed transient mandibular prostheses with fully moldable attachments and distal extensions to prevent fractures. A 56-year-old female patient was referred to the Oral Rehabilitation and Implantology Service due to periodontal problems, difficulty in chewing capacity and aesthetic compromise. The patient was treated in a single surgical procedure with dental extractions, guided regularization of the alveolar process and guided placement of five interforaminal implants and placement of functional fixed mandibular prostheses with immediate loading with personalized UCLA'S, distal extensions and short arc occlusal scheme. At 3 months postoperatively, the definitive placement of fixed mandibular metal acrylic prostheses and conventional upper prostheses was performed. The functional and aesthetic integrity of the fixed mandibular prosthesis implant preserved with UCLA'S documents that implant placement in the interforaminal zone with an immediate loading protocol is a viable treatment option for prosthetic rehabilitation of the fully edentulous mandibular arch and that design with distal extensions in the posterior sector of the mandibular arch is an effective option to avoid fracture of the prostheses, presenting a survival of the five mandibular implants of 100% at 1 year postoperatively.

Somatosensory alterations after single-unit dental implant immediate loading: A 1-year follow-up study.

OBJECTIVE: This cohort study aimed to assess the incidence of somatosensory alterations after implant surgery using standardized quantitative and qualitative sensory testing. METHODS: 33 participants with single-tooth loss, undergoing immediate implant loading were included. Quantitative Sensory Testing (QST) and Qualitative Sensory Testing (QualST) were conducted at eight time points over a year (baseline to 1 year). Two-Way Repeated Measures ANOVA and post hoc Tukey test were used on QST values and Cochran Q test on QualST. RESULTS: The study revealed significant increase in thermal thresholds overtime. At the operated side, overall Cold Pain Threshold (extraoral: p = 0.030; intraoral: p < 0.001), and Cold Detection Threshold (intraoral: p < 0.001) increased overtime. In contralateral region, maxilla Cold Detection Threshold (extraoral: p = 0.024; intraoral: p = 0.031), Warm Detection Threshold (extraoral: p = 0.026; intraoral: p = 0.047) and overall Cold Pain Threshold (extraoral and intraoral: p < 0.001) also increased. QualST showed extraoral pinprick (p = 0.032) and intraoral pinprick (p = 0.000), cold (p = 0.000) and touch (p = 0.002) stimuli abnormalities overtime. CONCLUSIONS: Somatosensory alterations after implant surgery were detected in both quantitative and qualitative sensory assessments, but rapidly decreased during the first follow-ups, and then continuously until 1-year. CLINICAL SIGNIFICANCE: This study provides clinical and controlled evidence on the real effect of the somatosensory alterations overtime, leading to a better understanding of neurosensory behaviour after single-tooth dental implant rehabilitation.

Adding mechanobiological cell features to finite element analysis of an immediately loaded dental implant.

Finite element analysis (FEA) has been used to analyze the behavior of dental materials, mainly in implantology. However, FEA is a mechanical analysis and few studies have tried to simulate the biological characteristics of the healing process of loaded implants. This study used the rule of mixtures to simulate the biological healing process of immediate implants in an alveolus socket and bone-implant junction interface through FEA. Three-dimensional geometric models of the structures were obtained, and material properties were derived from the literature. The rule of mixtures was used to simulate the healing periods-immediate and early loading, in which the concentration of each cell type, based on in vivo studies, influenced the final elastic moduli. A 100 N occlusal load was simulated in axial and oblique directions. The models were evaluated for maximum and minimum principal strains, and the bone overload was assessed through Frost's mechanostat. There was a higher strain concentration in the healing regions and cortical bone tissue near the cervical portion. The bone overload was higher in the immediate load condition. The method used in this study may help to simulate the biological healing process and could be useful to relate FEA results to clinical practice.

Sensitivity to change and responsiveness of provocative load tests among athletes with patellar tendinopathy.

BACKGROUND: Pain provocation tests are recommended for assessing pain severity and as an outcome measure for individuals with patellar tendinopathy. OBJECTIVE: To evaluate floor and ceiling effects, sensitivity to change, and responsiveness cut-offs of two provocative load tests among athletes with patellar tendinopathy. METHODS: Athletes (N = 41) performed six repetitions for the single leg decline squat (SLDS) and resisted knee extension (KE) at baseline and 12 weeks. Participants rated their pain during each test on a visual analog scale (VAS). Sensitivity to change was assessed by calculating effect size (ES) and the standardized response mean (SRM). The responsiveness cut-offs were assessed using a combination of anchor and distribution- based methods to determine the minimal clinically important difference (MCID) for each test. RESULTS: A floor or ceiling effect was observed in only a small number of participants for both tests except for KE, for which approximately one third of participants had a floor effect at week 12. There was higher sensitivity to change for SLDS (ES: 1.93/SRM: 1.43) compared with KE (ES:0.96/SRM: 1.09). The MCID corresponded to a decrease of 1.6 points for SLDS and 1.0 for KE, while the distribution-based method estimated 1.2 points for SLDS and 1.1 for KE. CONCLUSION: This study found moderate to high sensitivity to change and established MCID values for the SLDS and KE test in athletes with patellar tendinopathy before and after rehabilitation. Both tests may be useful as pain on loading outcomes as athletes progress with their rehabilitation, but the KE test results in higher floor effects and has lower sensitivity to change.

Electrical Conductivity Boost: In Situ Polypyrrole Polymerization in Monolithically Integrated Surface-Supported Metal-Organic Framework Templates.

Recent progress in synthesizing and integrating surface-supported metal-organic frameworks (SURMOFs) has highlighted their potential in developing hybrid electronic devices with exceptional mechanical flexibility, film processability, and cost-effectiveness. However, the low electrical conductivity of SURMOFs has limited their use in devices. To address this, researchers have utilized the porosity of SURMOFs to enhance electrical conductivity by incorporating conductive materials. This study introduces a method to improve the electrical conductivity of HKUST-1 templates by in situ polymerization of conductive polypyrrole (PPy) chains within the SURMOF pores (named as PPy@HKUST-1). Nanomembrane-origami technology is employed for integration, allowing a rolled-up metallic nanomembrane to contact the HKUST-1 films without causing damage. After a 24 h loading period, the electrical conductivity at room temperature reaches approximately 5.10-6 S m-1 . The nanomembrane-based contact enables reliable electrical characterization even at low temperatures. Key parameters of PPy@HKUST-1 films, such as trap barrier height, dielectric constant, and tunneling barrier height, are determined using established conduction mechanisms. These findings represent a significant advancement in real-time control of SURMOF conductivity, opening pathways for innovative electronic-optoelectronic device development. This study demonstrates the potential of SURMOFs to revolutionize hybrid electronic devices by enhancing electrical conductivity through intelligent integration strategies.

Effect of loading protocol on peri-implant marginal bone loss: randomized clinical trial / Efeito do protocolo de carregamento na perda óssea marginal peri-implantar: ensaio clínico randomizado

Objective: This clinical study was conducted to evaluate the effect of loading protocol using hybrid ceramic resinous material on marginal bone loss. Material and Methods: This study was conducted in the fixed prosthodontics department, at Ain Shams University on 30 titanium endosseous tapered threaded implants which were placed in 30 patients in the upper premolar area. Patients were divided randomly according to the loading protocol into 3 groups (10 patients each): Group I (IFLV): patients received CAD/CAM polymer infiltrated ceramic (VITA-ENAMIC) crowns (immediate functional loading), Group II (IFLP): patients received CAD/CAM PMMA crowns (in occlusion for 3 months) followed by CAD/CAM polymer infiltrated ceramic (VITA-ENAMIC) crowns (functional loading), and Group III (INFLP): patients received CAD/CAM PMMA crowns (out of occlusion for 3 months) followed by CAD/CAM VITA-ENAMIC crowns (functional loading). Results: After three months; the highest value of marginal bone loss (mm) was found in IFLV, followed by IFLP, while the lowest value was found in INFLP. After six months, the highest value was found in IFLP, followed by IFLV, while the lowest value was found in INFLP. Also, after twelve months, the highest value was found in IFLV, followed by IFLP, while the lowest value was found in INFLP. Marginal bone loss values were within the accepted values for clinical success for all the tested groups. Conclusion: Immediate non-functional loading provided more acceptable outcomes than immediate functional loading. Also, immediately functional and non-functional implant loading using hybrid ceramic as permanent material has shown promising results with proper patient selection (AU)

Objetivo: Este estudo clínico foi realizado para avaliar o efeito do protocolo de carregamento utilizando material resinoso cerâmico híbrido na perda óssea marginal. Material e Métodos: Este estudo foi realizado no departamento de prótese fixa da Universidade Ain Shams em 30 implantes endósseos cônicos de titânio que foram instalados em 30 pacientes na região de pré-molares superiores. Os pacientes foram divididos aleatoriamente de acordo com o protocolo de carregamento em 3 grupos (10 pacientes cada): Grupo I (IFLV): os pacientes receberam coroas usinadas em CAD/CAM de cerâmica infiltrada com polímero (VITA-ENAMIC) (carga imediata), Grupo II (IFLP): os pacientes receberam coroas usinadas em CAD/CAM de PMMA (em oclusão por 3 meses) seguidas por coroas de cerâmica infiltrada com polímero (VITA-ENAMIC) (carga funcional), e Grupo III (INFLP): os pacientes receberam coroas usinadas em CAD/CAM de PMMA (infraoclusão por 3 meses) seguido de coroas de VITA-ENAMIC (carga funcional). Resultados: Após três meses; o maior valor de perda óssea marginal (mm) foi encontrado no IFLV, seguido pelo IFLP, enquanto o menor valor foi encontrado no INFLP. Após seis meses, o maior valor foi encontrado no IFLP, seguido do IFLV, enquanto o menor valor foi encontrado no INFLP. Além disso, após doze meses, o maior valor foi encontrado no IFLV, seguido pelo IFLP, enquanto o menor valor foi encontrado no INFLP. Os valores de perda óssea marginal estavam todos dentro de valores aceitáveis para sucesso clínico para todos os grupos testados. Conclusão: A carga funcional não imediata proporcionou resultados mais aceitáveis do que a carga imediata. Além disso, o carregamento funcional imediato e não imediato de implantes utilizando coroas finais de cerâmica híbrida mostrou resultados promissores com a seleção adequada dos pacientes.(AU)

A Dynamic Elbow Testing Apparatus for Simulating Elbow Joint Motion in Varying Shoulder Positions.

Purpose: To develop and evaluate the capabilities of a dynamic elbow testing apparatus that simulates unconstrained elbow motion throughout the range of humerothoracic (HTA) abduction. Methods: Elbow flexion was generated by six computer-controlled electromechanical actuators that simulated muscle action, while six degree-of-freedom joint motion was measured using an optical tracking device. Repeatability of joint kinematics was assessed at four HTA angles (0°, 45°, 90°, 135°) and with two muscle force combinations (A1-biceps brachialis, brachioradialis and A2-biceps, brachioradialis). Repeatability was determined by comparing kinematics at every 10° of flexion over five flexion-extension cycles (0° to 100°). Results: Multiple muscle force combinations can be used at each HTA angle to generate elbow flexion. Trials showed that the testing apparatus produced highly repeatable joint motion at each HTA angle and with varying muscle force combinations. The intraclass correlation coefficient was greater than 0.95 for all conditions. Conclusions: Repeatable smooth cadaveric elbow motion was created that mimicked the in vivo situation. Clinical relevance: These results suggest that the dynamic elbow testing apparatus can be used to characterize elbow biomechanics in cadaver upper extremities.

Dynamics of stored lipids in fall migratory monarch butterflies (Danaus plexippus): Nectaring in northern Mexico allows recovery from droughts at higher latitudes.

The eastern population of the North American monarch butterfly (Danaus plexippus) overwinters from November through March in the high-altitude (3000 m+) forests of central Mexico during which time they rely largely on stored lipids. These are acquired during larval development and the conversion of sugars from floral nectar by adults. We sampled fall migrant monarchs from southern Canada through the migratory route to two overwintering sites in 2019 (n = 10 locations), 2020 (n = 8 locations) and 2021 (n = 7 locations). Moderate to extreme droughts along the migratory route were expected to result in low lipid levels in overwintering monarchs but our analysis of lipid levels of monarchs collected at overwintering sites indicated that in all years most had high levels of lipids prior to winter. Clearly, a significant proportion of lipids were consistently acquired in Mexico during the last portion of the migration. Drought conditions in Oklahoma, Texas and northern Mexico in 2019 resulted in the lowest levels of lipid mass and wing loading observed in that year but with higher levels at locations southward in Mexico to the overwintering sites. Compared with 2019, lipid levels increased during the 2020 and 2021 fall migrations but were again higher during the Mexican portion of the migration than for Oklahoma and Texas samples, emphasizing a recovery of lipids as monarchs advanced toward the overwintering locations. In all 3 years, body water was highest during the Canada-USA phase of migration but then declined during the nectar foraging phase in Mexico before recovering again at the overwintering sites. The increase in mass and lipids from those in Texas to the overwintering sites in Mexico indicates that nectar availability in Mexico can compensate for poor conditions experienced further north. Our work emphasizes the need to maintain the floral and therefore nectar resources that fuel both the migration and storage of lipids throughout the entire migratory route.

Improving 2-Chlorotrityl Chloride (2-CTC) Resin Activation.

Used in solid-phase peptide synthesis (SPPS) for peptides with an acid termination, the 2-chlorotrityl chloride (2-CTC) resin is highly susceptible to moisture, leading to reduced resin loading and lower synthetic yields. It is therefore recommended that the resin be activated with thionyl chloride (SOCl2) before peptide assembly. Here we present an optimized procedure for resin activation that minimizes the use of SOCl2 as the activation reagent and reduces the activation time. Additionally, we demonstrate the feasibility of reusing the 2-CTC resin when following the activation protocol, achieving comparable results to the first usage of the resin. Moreover, we achieved different degrees of resin activation by varying the amount of SOCl2. For instance, the use of 2% SOCl2 in anhydrous dichloromethane (DCM) allowed up to 44% activation of the resin, thereby making it suitable for the synthesis of longer peptides. Alternatively, employing 25% SOCl2 in anhydrous DCM resulted in up to 80% activation with a reaction time of only 5 min in both cases.

Immediate versus conventional loading of mandibular implant-retained overdentures: a 3-year follow-up of a randomized controlled trial.

OBJECTIVES: There is a scarcity of randomized clinical trials (RCT) that report medium- and long-term results and a lack of consensus in the literature on the predictability of immediately loaded unsplinted narrow diameter implants supporting mandibular overdentures. This RCT compared the performance of conventional (CL) and immediate loading (IL) of mandibular overdentures retained by two narrow-diameter implants for 3 years. MATERIALS AND METHODS: Patients from an RCT treated with CL or IL were invited to attend to 2- and 3-year follow-ups. Clinical, radiographic, functional, and oral health-related quality of life parameters were evaluated. Prosthetic maintenance events, biological complications, and success and survival rates were also recorded. The data were tested by multilevel mixed-effects linear regression analysis and chi-squared tests. RESULTS: The 1-year survival rates of 90% in the CL group and 85% in the IL group were maintained as no implants were lost between 1 and 3 years. The marginal bone loss (MBL) in the IL group was significantly lower after year 3 (-0.04; p < 0.01). Significant changes were found only for the intra-group comparisons in the third year of function: (i) CL and IL presented similar progression of implant stability, MBL, and posterior bone area resorption; (ii) while CL started deteriorating of masticatory function, IL still exhibited functional evolution and (iii) oral comfort domain in the CL and pain domain in the IL were improved. CONCLUSION: Although IL experienced the lowest MBL after 3 years, the outcomes showed that both loading protocols result in predictable medium-term rehabilitation when monitored annually. CLINICAL RELEVANCE: It can be expected that in the third year of function, patients with immediate loading may present more complaints related to general performance even with acceptable masticatory function and self-reported improvements in oral comfort.

Fabrication of Carum copticum essential oil-loaded chitosan nanoparticles and evaluation its insecticidal activity for controlling Rhyzopertha dominica and Tribolium confusum.

Introduction: Plant essential oils (EOs) can be used as a feasible tool for insect pest control. Nanoparticle formulations of plant EOs can improve the efficiency and stability of EOs, as well as insecticidal potential. Methods: In this study, Carum copticum L. essential oil-loaded nanoparticles (OLNs) were prepared via an oil-in-water emulsion, followed by droplet solidiffication via ionic gelation using a cross-linker, sodium tripolyphosphate (TPP). The nanoparticles were characterized by ultraviolet and visible (UV-Vis) spectrophotometry, Fourier-transform infrared spectroscopy (FTIR), laser light scattering (LS), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). Moreover, the insecticidal activity of C. copticum EO and OLNs was evaluated against Rhyzopertha dominica (F.) (Coleoptera: Bostrychidae) and Tribolium confusum Jacquelin du Val. (Coleoptera: Tenebrionidae). In addition, their effectiveness was assessed on the progeny production of tested insect species. Results and discussion: The loading efficiency ranged from 34.33 to 84.16% when the chitosan to EO weight ratio was 1:1.25 and 1:0.5, respectively. The loading efficiency decreased with increasing EO content in the nanoparticles. The OLN particles exhibited spherical shape. The particle size was in the range 120-223.6 nm and increased with the increase of EO to chitosan ratio. So that the largest mean particle size (223.6 nm) was reported in the 1:1.25 weight ratio of chitosan to the EO. The mortality percentage of R. dominica and T. confusum adults were 74 and 57% when exposed for 7 days to 2000 mg/kg of OLNs at the 1:1.25 weight ratio, while EO caused 62 and 44% mortality on both insect species, respectively. Therefore, OLNs can potentially improve the insecticidal activity of C. copticum EO and could be applied to facilitate control of stored-product insect pests.

Optimizing the Use of Beta-Lactam Antibiotics in Clinical Practice: A Test of Time.

Despite their limitations, the pharmacokinetics (PK) and pharmacodynamics (PD) indices form the basis for our current understanding regarding antibiotic development, selection, and dose optimization. Application of PK-PD in medicine has been associated with better clinical outcome, suppression of resistance, and optimization of antibiotic consumption. Beta-lactam antibiotics remain the cornerstone for empirical and directed therapy in many patients. The percentage of time of the dosing interval that the free (unbound) drug concentration remains above the minimal inhibitory concentration (MIC) (%fT > MIC) has been considered the PK-PD index that best predicts the relationship between antibiotic exposure and killing for the beta-lactam antibiotics. Time dependence of beta-lactam antibiotics has its origin in the acylation process of the serine active site of penicillin-binding proteins, which subsequently results in bacteriostatic and bactericidal effects during the dosing interval. To enhance the likelihood of target attainment, higher doses, and prolonged infusion strategies, with/or without loading doses, have been applied to compensate for subtherapeutic levels of antibiotics related to PK-PD changes, especially in the early phase of severe sepsis. To minimize resistance and maximize clinical outcome, empirical therapy with a meropenem loading dose followed by high-dose-prolonged infusion should be considered in patients with high inoculum infections presenting as severe (Gram negative) sepsis. Subsequent de-escalation and dosing of beta-lactam antibiotics should be considered as an individualized dynamic process that requires dose adjustments throughout the time course of the disease process mediated by clinical parameters that indirectly assess PK-PD alterations.

Effects of animal type, handling, and transportation conditions on beef cattle temperament pre-slaughter / Efeito do tipo animal, manejo e condições de transporte no temperamento pré-abate de bovinos de corte

This study aimed to investigate the effects of animal type, on-farm handling, and transport conditions on temperament of beef cattle pre-slaughter. The study evaluated 4,061 cattle batches, averaging 49 animals, with a total of 199,026 cattle. Temperament was evaluated through a behavioral assessment carried out based on the temperament shown by cattle when approached by humans. One of three different temperament scores were assigned to each batch: calm, anxious, or excitable. Excitable temperament was reported in animals subjected to long transport time and distance and high loading density. The degree of carcass fatness was higher in calm animals, followed by anxious animals, with the excited temperament animals having the lowest carcass fatness degree. Older animals showed more excitable temperament, while younger animals showed calmer temperament. The excitable temperament was more evident in horned animals in relation to polled animals. Animal temperament was more reactive in batches with older cattle, low carcass fatness degree, and with more than 20% horned animals. Good handling and loading facilities and procedures at the farm contributed to adequate cattle temperament expression prior to slaughter.

O trabalho teve por objetivo avaliar a influência de variáveis relacionadas às condições de manejo e de transporte na expressão do temperamento pré-abate de bovinos de corte. Foram avaliados 4.061 lotes, com média de 49 animais, totalizando 199.026 bovinos. O temperamento foi avaliado por meio da expressão comportamental dos lotes diante da aproximação humana. Foram atribuídas três diferentes classificações de temperamento: "calmo", "ansioso" ou "excitável". Verificou-se temperamento excitável em animais submetidos a longos tempos de transporte, a grandes distâncias e à alta densidade de carga. O grau de gordura na carcaça foi mais elevado em animais "calmos", seguidos dos animais "ansiosos", e menor em animais de temperamento "excitado". Os animais com temperamento excitável eram mais velhos, e aqueles com temperamento calmo eram mais jovem. O temperamento excitável foi mais evidente em animais com a presença de chifres. O temperamento animal foi mais reativo em lotes de bovinos mais velhos, com baixo grau de gordura de carcaça e com mais de 20% de animais com presença de chifres. Boas instalações e condições apropriadas de manejo e de carregamento dos animais contribuem para a expressão adequada do temperamento dos bovinos no pré-abate.

Short implants: Influence of different diameters, torques, and transmucosal heights of straight prosthetic abutments on screw preload loss after cycling.

This study evaluated the influence of different implant diameters, insertion torques, and transmucosal heights on the loosening of abutments installed on short implants, after mechanical cycling. The Morse taper connection implants (n = 96) tested were 5 mm high, divided according to the platform diameter: 4 or 6 mm. A universal abutment was coupled to each implant (with different transmucosal heights: 1 or 5 mm). The sets were subdivided into 20- and 32-Ncm torque. After the cycle fatigue test, the detorque values were measured with a digital torque indicator. After mechanical cycling, the mean detorque values obtained for the abutment with 20-Ncm insertion torque were lower than for implants with 32-Ncm insertion torque, regardless of the platform diameter or transmucosal height. In the 20-Ncm torque group, there was no statistically significant difference in the detorque values between platform diameters or transmucosal heights. Otherwise, for 32-Ncm sets, a smaller platform diameter (4 mm), and a longer transmucosal height (5 mm) showed the lowest detorque values. In conclusion, implants placed with 32-Ncm insertion torque and abutments with 1 mm transmucosal height and a 6 mm implant diameter demonstrated the highest detorque values.

A non-intrusive and reactive architecture to support real-time ETL processes in data warehousing environments.

Nowadays, organizations are very interested to gather data for strategic decision-making. Data are disposable in operational sources, which are distributed, heterogeneous, and autonomous. These data are gathered through ETL processes, which occur traditionally in a pre-defined time, that is, once a day, once a week, once a month or in a specific period of time. On the other hand, there are special applications for which data needs to be obtained in a faster way and sometimes even immediately after the data are generated in the operation data sources, such as health systems and digital agriculture. Thus, the conventional ETL process and the disposable techniques are incapable of making the operational data delivered in real-time, providing low latency, high availability, and scalability. As our proposal, we present an innovative architecture, named Data Magnet, to cope with real-time ETL processes. The experimental tests performed in the digital agriculture domain using real and synthetic data showed that our proposal was able to deal in real-time with the ETL process. The Data Magnet provided great performance, showing an almost constant elapsed time for growing data volumes. Besides, Data Magnet provided significant performance gains over the traditional trigger technique.

Efectos de la microvibración y estrógeno en la remodelación ósea: revisión sistemática / Effects of micro-vibration and estrogen on bone: a systematic review

Introducción: la pérdida de hueso es un suceso que afecta a la totalidad del esqueleto. Así, las alteraciones musculoesqueléticas afectan a millones de personas en todo el mundo y están entre las causas más comunes de dolor crónico. Objetivo: conocer los efectos de la microvibración y estrógeno en el remodelado óseo. Material y métodos: se realizó una revisión sistemática, se buscó en siete bases de datos, se incluyeron estudios clínicos controlados realizados con ratas o ratones en el periodo de publicación del 2004 al 2022. La calidad de la evidencia sintetizada se evaluó con la escala de Jadad. Resultados: se identificaron quince artículos como estudios primarios. La microvibración reportó cambios in vivo/in vitro totalmente dependientes del estímulo que conlleva incremento de la cortical externa. A su vez, con la administración de estrógeno se reportaron efectos, específicamente, en el hueso trabecular y en el periostio, así como colágeno inmaduro que indican un recambio óseo. Conclusión: tanto la microvibración como la administración de estrógeno coadyuvan a la remodelación del tejido óseo y son aprovechables como tratamiento en el momento que exista un problema de pérdida ósea (AU)

Introduction: Bone loss is an event that affects the entire skeleton. Thus, musculoskeletal disorders affect millions of people worldwide and are among the most common causes of chronic pain. Objective: to know the effects of micro-vibration and estrogen on bone remodelling. Material and methods: a systematic review was carried out; seven databases were searched; Controlled clinical studies conducted with rats or mice in the publication period from 2004 to 2022 were included. The quality of the synthesized evidence was assessed using the Jadad scale. Results: fifteen articles were identified as primary studies. Micro vibration reported in vivo/in vitro changes dependent on the stimulus that entails an increase in the outer cortex. In turn, with the administration of estrogen, effects were reported, specifically in the trabecular bone and in the periosteum, as well as immature collagen that indicates bone turnover. Conclusion: both micro-vibration and the administration of estrogen contribute to the remodelling of bone tissue and are usable as a treatment for bone loss (AU)

Resistance of Argopecten purpuratus scallop larvae to vibriosis is associated with the front-loading of immune genes and enhanced antimicrobial response.

Mass mortality events caused by vibriosis have emerged in hatchery-reared scallop larvae from Chile, threatening scallop aquaculture. In an attempt to mitigate this emerging infectious disease and provide candidates for marker-assisted selective breeding, we tested here the existence of a genetic component of Argopecten purpuratus scallop resistance to the pathogen Vibrio bivalvicida. Through a dual RNA-seq approach we analyzed the basal transcriptome and the transcriptional response to infection in two resistant and two susceptible families as well as the pathogen transcriptomic response to host colonization. The results highlighted a genetic basis in the resistance of scallop larvae to the pathogen. The Vibrio response was characterized by a general metabolic adaptation to the host environment, along with several predicted virulence factors overexpressed in infected scallop larvae with no difference between resistant and susceptible host phenotypes. On the host side, several biological processes were enriched in uninfected resistant larvae. Within these enriched categories, immune-related processes were overexpressed, while morphogenesis, biomineral tissue development, and angiogenesis were under expressed. Particularly, genes involved in immune recognition and antimicrobial response, such as lipopolysaccharide-binding proteins (LBPs), lysozyme, and bactericidal permeability-increasing protein (BPI) were overexpressed in uninfected resistant larvae. As expected, immune-related biological processes were enriched in Vibrio-infected larvae, but they were more numerous in resistant larvae. Overexpressed immune genes in response to infection included several Toll-like receptors, TNF and NF-κB immune signaling genes, and the antimicrobial peptide Big defensin ApBD1. Results strongly suggest that both a front-loading of immune genes and an enhanced antimicrobial response to infection contribute to the resistance, while pathogen infective strategy does not discriminate between host phenotypes. Overall, early expression of host immune genes appears as a strong determinant of the disease outcome that could be used in marker-assisted selective breeding.

Survival of osseointegrated implants: a 10-year retrospective study.

Introduction: New techniques, surgical protocols, dental implant designs, and prosthetic rehabilitation have been used in dentistry, most of which have yielded good results in the literature. This retrospective survey assessed the clinical results of patients rehabilitated with dental implants between January 2011 and December 2021. Load protocols (immediate and conventional), types of connections of the installed implants, external hexagon (EH), and cone morse (MC) were evaluated. Material and methods: Two evaluators were selected and calibrated to perform the analyses. The inclusion criteria were records with complete and legible information of patients rehabilitated with dental implants who were followed for at least 1 year after rehabilita-tion. The medical records were divided into two groups, G1 (implants with conventional load) and G2 (implants with immediate load), and further subdivided according to implant type. Information about the rehabilitation failures was noted and descriptive statistics of the results were obtained. Results: Among the 432 evaluated medical records of patients rehabilitated with implants, the study included 319 records: 223 from women and 96 from men, aged 20-79 years. In total, data were available on 1,227 implants with dimensions of 10-13 mm and diameters of 3.75-4 mm. The G1 (n=1.188) survival rates were 94.95% for EH implants and 99.5% for MC implants. In G2 (n=39), the survival rates were 93.75% for EH implants and 91.3% for MC implants. The implant survival rates were relatively high among all groups evaluated; however, the discrepancy between the number of implants in the groups may compromise the comparison between them. Understanding and respecting the biomechanical and technical principles of each protocol was the main factor influencing the success of rehabilitation. Conclusion: The results of this study showed that, according to medical records, rehabilitation with dental implants showed excellent results regardless of the connection type (EH or MC) or loading protocol (conventional or immediate). The two loading protocols and two connection types had excellent results and scientific support. Therefore, the choice should be based on the clinical needs of each patient.

Short exposure to high salt in drinking solution leads to a cardiovascular phenotype of hypertension without changes in the blood volume of rats.

NEW FINDINGS: What is the central question of this study? Is the cardiovascular phenotype of high blood pressure observed in rats salt loaded with 2% NaCl in drinking solution a blood volume-dependent hypertension? What is the main finding and its importance? Animals exposed to 2% NaCl drinking solution develop hypertension, with dominance of sympathetic outflow and high [Na+ ] in the cerebrospinal fluid, but without changes in the blood volume. The phenotype of salt-dependent hypertension might be related to accumulation of [Na+ ] in the cerebrospinal fluid, which makes it an interesting animal model in which to study the neuronal pathways involved in control of the circulation in osmotic challenge conditions. ABSTRACT: Evidence suggests that hypertension induced by high salt intake is correlated with an autonomic imbalance that favours sympathetic hyperactivity and an increase in vascular resistance, indicating a neurogenic component to this pathology. Although there are several animal models in which to study salt-induced hypertension with prolonged exposure to a high-sodium diet, here we sought to investigate whether the increase in arterial blood pressure of rats subjected to a short exposure to high salt, with 2% NaCl drinking solution instead of water, relies on changes in the circulating blood volume. Male Wistar rats were divided randomly into three groups: euhydrated (EU, n = 10), salt loaded (SL, n = 13) and water deprived (WD, n = 6). The SL rats exhibited a significant increase in mean arterial blood pressure, with a large low-frequency component of systolic arterial blood pressure variability, when compared with the EU group. Circulating blood volume did not differ between SL and EU rats, but it was lower in WD rats. Compared with EU rats, the [Na+ ] in cerebrospinal fluid was higher in SL rats and similar in magnitude to the WD rats. Plasma [Na+ ] did not differ between SL and EU rats, but it was higher in WD rats. Collectively, our data suggest that the hypertension induced by a short exposure to high salt intake closely resembles a neurogenic mechanism, but not a blood volume-dependent mechanism, with cumulative [Na+ ] in the cerebrospinal fluid that could be associated with changes in the neurochemistry of autonomic nuclei, which are highly susceptible to osmotic stress related to high salt consumption.