Assessing screw length impact on bone strain in proximal humerus fracture fixation via surrogate modelling.

A high failure rate is associated with fracture plates in proximal humerus fractures. The causes of failure remain unclear due to the complexity of the problem including the number and position of the screws, their length and orientation in the space. Finite element (FE) analysis has been used for the analysis of plating of proximal humeral fractures, but due to computational costs is unable to fully explore all potential screw combinations. Surrogate modelling is a viable solution, having the potential to significantly reduce the computational cost whilst requiring a moderate number of training sets. This study aimed to develop adaptive neural network (ANN)-based surrogate models to predict the strain in the humeral bone as a result of changing the length of the screws. The ANN models were trained using data from FE simulations of a single humerus, and after defining the best training sample size, multiple and single-output models were developed. The best performing ANN model was used to predict all the possible screw length configurations. The ANN predictions were compared with the FE results of unseen data, showing a good correlation (R2 = 0.99) and low levels of error (RMSE = 0.51%-1.83% strain). The ANN predictions of all possible screw length configurations showed that the screw that provided the medial support was the most influential on the predicted strain. Overall, the ANN-based surrogate model accurately captured bone strains and has the potential to be used for more complex problems with a larger number of variables.

Primary stability in locking plate fixation for proximal humeral fractures may be increased by using an additional nail osteosynthesis in combination with locking plate osteosynthesis-A biomechanical comparison.

BACKGROUND: Stability is regarded as an important factor for proper healing and avoiding secondary dislocation in osteoporotic fractures of the proximal humerus. Several surgical techniques have been proposed for treatment, including intramedullary nail osteosynthesis and locking plate fixation. This study introduces a novel approach that combines both techniques and compares its primary stability with conventional methods. METHODS: The study involved 25 osteoporotic humeri with two-part fracture models, which were randomly assigned to locking-plate fixation, intramedullary nailing, or a combination of both techniques. The specimens were subjected to sinusoidal loading at 250 N in 20° abduction for 5000 cycles and then to quasi-static loading until failure. Fracture movement, failure mode, and failure load were measured and compared among the groups. FINDINGS: The groups fixated with intramedullary nailing and the groups fixated with intramedullary nailing and locking plate fixation showed significantly lower fracture motion than the group using locking plate fixation only (p < 0.005) and significantly higher load to failure (p = 0.007 and p = 0.0062, respectively). There was no significant difference between the group using intramedullary nailing and the group using locking-plate fixation and intramedullary nailing in fracture movement or load-to-failure (p > 0.005). INTERPRETATION: The results indicate that locking plate fixation provides less primary stability than intramedullary nailing or the combined of both techniques. This combined approach may offer advantages as a treatment for complex proximal humeral fractures in osteoporotic bone, and specific implants should be developed to ensure optimal treatment.

Combined home and clinic-based therapy versus home-based exercise programme after distal radial fracture: a randomized controlled study.

We investigated outcomes of clinic-based hand therapy combined with a home-based exercise programme after anterior plating for distal radial fractures. A total of 102 patients were randomly assigned to one of three groups: a home-based exercise programme alone; a home-based exercise programme combined with four hand therapy sessions in the clinic; and a home-based exercise programme with seven sessions in the clinic. Mean Patient-Rated Wrist Evaluation scores at 6 weeks were significantly better for the group of patients with seven sessions in the clinic than in those with only home exercises (12 vs. 30), but the difference was no longer significant at 12 weeks. Grip strength was significantly better at 6 and 12 weeks. Combined home- and clinic-based hand therapy may facilitate an earlier return of function after anterior plating for distal radius fractures.Level of evidence: II.

Outcomes of spring-locking plate fixation method using locking mesh plate/box plate for posterior wall fractures of the acetabulum: a retrospective single-centre study.

INTRODUCTION: This retrospective study evaluated the outcomes of variable-angle locking compression plate, mesh plate, or footplate box fixation for posterior acetabular wall fractures. PATIENTS AND METHODS: The study included nine patients with unstable posterior acetabular wall fractures who underwent internal fixation with the "spring-locking plate fixation method" between January 2015 and December 2019. Patient demographics, fracture classifications, surgical details, radiological and clinical evaluations, and complications were collected from electronic medical records. Statistical analyses were performed to assess the relationship between preoperative and postoperative dislocations. RESULTS: The mean age of the patients was 46 years, and the majority were men (88.9%). Fracture types included posterior wall fractures and posterior column plus posterior wall fractures. The mean operative time was 246 min and the mean blood loss was 663 mL. The surgical approaches included the Kocher-Langenbeck, Ganz trochanteric flip, and transtrochanteric approaches. Variable-angle locking compression plate mesh plates and footplate box type implants were used for fixation. The mean preoperative dislocation was 23 mm, which was significantly reduced to 1 mm immediately post-operation and at the final observation. The bone fusion rate was 100% and radiological and clinical evaluations revealed favourable outcomes. Complications were minimal, with mild heterotopic ossification observed in four patients. CONCLUSION: The spring-locking plate fixation method demonstrated satisfactory outcomes for the treatment of posterior acetabular wall fractures. This technique provides rigid fixation. Furthermore, the use of variable-angle locking screws minimizes the risk of intra-articular perforations. Despite limitations such as a small sample size and the absence of a control group, the results suggest that the spring-locking plate fixation method may be valuable in managing these fractures.

Biomechanical evaluation of novel intra- and extramedullary assembly fixation for proximal humerus fractures in the elderly.

Purpose: A novel intra- and extramedullary assembly fixation method was introduced, which achieved good clinical results in complex proximal humeral fractures; however, evidence of its comparability with traditional fixation is lacking. This biomechanical study aimed to compare it with traditional fixation devices in osteoporotic proximal humeral fractures. Methods: Three-part proximal humeral fractures with osteopenia were created on 12 pairs of fresh frozen humerus specimens and allocated to three groups: 1) lateral locking plate, 2) intramedullary nail, and 3) intra- and extramedullary assembly fixation. The specimens were loaded to simulate the force at 25° abduction. Thereafter, an axial stiffness test and a compound cyclic load to failure test were applied. Structural stiffness, number of cycles loaded to failure, and relative displacement values at predetermined measurement points were recorded using a testing machine and a synchronized 3D video tracking system. Results: In terms of initial stiffness and the number of cycles loaded to failure, the intra- and extramedullary assembly fixation group showed notable improvements compared to the other groups (p <0.017). The mean relative displacement value of measurement points in the intra- and extramedullary assembly fixation group was smaller than that in the other two groups. However, there was no significant difference until 10,000 cycles. The mean relative displacement of the intramedullary nail group (3.136 mm) exceeded 3 mm at 7,500 cycles of loading. Conclusion: In this test model, axial fixation can provide better mechanical stability than non-axial fixation. The intra- and extramedullary assembly fixation is better able to prevent the varus collapse for elderly proximal humeral fractures with posteromedial comminution.

Quality of Life and Pain after Proximal Humeral Fractures in the Elderly: A Systematic Review.

Background and Objectives: The proximal humeral fracture (PHF) is one of the most common fractures in elderly patients. A PHF might influence the quality of life (QoL) on several different levels, especially in elderly patients, but it is unclear which treatment option results in a better QoL outcome. Therefore, we aimed to systematically review the current literature for studies that have analyzed the QoL and pain of elderly patients treated either surgically or non-operatively for PHF. Materials and Methods: A comprehensive search of the literature was performed in the PubMed database from January to April 2023. Studies describing the QoL or the level of pain of patients older than 60 years with the EuroQoL-5 Dimension (EQ-5D) score or the visual analogue scale (VAS) after the treatment of PHF, either non-operatively (non-OP), with open-reduction and internal fixation using a locking plate (LPF), or with reverse total shoulder arthroplasty (RTSA) were included. Twelve studies were analyzed descriptively and the individual risk of bias was assessed using the ROB2 and ROBINS-I tools. Results: A total of 12 studies with 712 patients at baseline were included (78% female sex, mean age 75.2 years). The reported VAS scores at 12-month follow-up (FU) ranged from 0.7 to 2.5. The calculated overall mean VAS score across all studies showed a decreasing tendency for all treatments, with an increasing FU time up to 12 months after PHF. None of the studies reported any significant differences of the EQ-5D across the groups. The overall calculated EQ-5D indices showed an increasing trend after 6-8 weeks FU, but did not differ significantly between the three treatments. Conclusions: In conclusion, the current literature suggests that there are no clinically important differences between the QoL or pain in elderly patients with PHF after non-operative treatment or surgical treatment with LPF or RTSA. However, the number of studies and level of evidence is rather low and further trials are urgently needed.

Ulnar-Sided Sclerosis of the Lunate Does Not Affect Outcomes in Patients Undergoing Volar Locking Plate Fixation for Distal Radius Fracture.

BACKGROUND AND AIM: Radial shortening after distal radius fracture causes ulnar impaction, and a mild reduction loss of radial height occurs even after volar locking plate fixation. This study aimed to determine whether preoperative ulnar-sided sclerosis affects clinical outcomes after volar locking plate fixation for distal radius fracture (DRF). METHOD: Among 369 patients who underwent volar locking plate fixation for DRF, 18 with preoperative ulnar-sided sclerosis of the lunate were included in Group A and compared to a 1:4 age-, sex- and fracture-pattern-matched cohort without sclerosis (72 patients, Group B). The visual analog scale (VAS), Disabilities of the Arm, Shoulder, and Hand (DASH) score, and grip strength were assessed as clinical outcomes. Ulnar variance (UV), radial inclination, radial length, and volar tilt at two weeks after surgery and the final follow-up were measured as radiographic outcomes. RESULTS: The mean VAS and DASH scores and grip strength did not differ between the two groups. The mean UV at two weeks after surgery and the last follow-up was significantly higher in Group A. The mean changes in UV were +0.62 mm in Group A and +0.48 mm in Group B. There were no significant intergroup differences. Neither UV nor its changes showed any association with DASH and VAS scores. CONCLUSIONS: Preoperative ulnar-sided sclerosis of the lunate did not affect clinical outcomes after volar locking plate fixation, even if UV increased postoperatively.

Early Internal Fixation of Concomitant Clavicle Fractures in Severe Thoracic Trauma Prevents Posttraumatic Pneumonia.

BACKGROUND: Severe thoracic trauma can lead to pulmonary restriction, loss of lung volume, and difficulty with ventilation. In recent years, there has been increasing evidence of better clinical outcomes following surgical stabilization of clavicle fractures in the setting of this combination of injuries. The aim of this study was to evaluate surgical versus non-surgical treatment of clavicle fractures in severe thoracic trauma in terms of clinical and radiological outcomes in order to make a generalized treatment recommendation based on the results of a large patient cohort. PATIENTS AND METHODS: This retrospective study included 181 patients (42 women, 139 men) from a European level I trauma centre with a median of 49.3 years in between 2005 and 2021. In 116 cases, the clavicle fracture was stabilized with locking plate or hook plate fixation (group 1), and in 65 cases, it was treated non-surgically (group 2). Long-term functional outcomes at least one year postoperatively using the disabilities of the arm, shoulder and hand (DASH) questionnaire and the Nottingham Clavicle Score (NCS) as well as radiological outcomes were collected in addition to parameters such as hospital days, intensive care days, and complication rates. RESULTS: The Injury Severity Score (ISS) was 17.8 ± 9.8 in group 1 and 19.9 ± 14.4 in group 2 (mean ± SEM; p = 0.93), the time in hospital was 21.5 ± 27.2 days in group 1 versus 16 ± 29.3 days in group 2 (p = 0.04). Forty-seven patients in group 1 and eleven patients in the group 2 were treated in the ICU. Regarding the duration of ventilation (group 1: 9.1 ± 8.9 days, group 2: 8.1 ± 7.7 days; p = 0.64), the functional outcome (DASH group 1: 11 ± 18 points, group 2: 13.7 ± 18. 4 points, p = 0.51; NCS group 1: 17.9 ± 8.1 points, group 2: 19.4 ± 10.3 points, p = 0.79) and the radiological results, no significant differences were found between the treatment groups. With an overall similar complication rate, pneumonia was found in 2% of patients in group 1 and in 14% of patients in group 2 (p = 0.001). DISCUSSION: This study could demonstrate that surgical locking plate fixation of clavicle fractures in combination with CWI significantly reducing the development of posttraumatic pneumonia in a large patient collection and, therefore, can be recommended as standard therapeutic approach for severe thoracic trauma.

Effects of sodium hyaluronate administration on levels of antioxidant enzymes, serum substance P and neuropeptide Y in patients undergoing locking plate fixation for tibial plateau fractures.

Objective: To analyze the effects of sodium hyaluronate administration on the serum levels of antioxidase, substance P (SP), and neuropeptide Y (NPY) in patients undergoing locking plate fixation (LPF) for tibial plateau fractures (TPF). Methods: We retrospectively analyzed the records of 66 patients with TPF who received treatment in the Beijing Chao-yang Hospital[PJMS1][2] from February 2017 to August 2020. According to the treatment records, 33 patients underwent LPF surgery (control-group), and 33 patients underwent LPF plus sodium hyaluronate treatment (observation-group). The levels of antioxidant enzymes (superoxide dismutase (SOD), catalase (CAT) and total antioxidant capacity (TAC)), SP and NPY. Results: Seven days after LPF operations, both groups showed lower levels of SOD, CAT, and TAC compared to pre-surgery levels, while levels of SP and NPY were higher. However, the observation group showed higher levels of SOD, CAT, and TAC compared to the control group, and lower levels of SP and NPY in the control group (P<0.05). Conclusion: The treatment of TPF with LPF plus sodium hyaluronate administration has been shown to effectively reduce oxidative stress reactions, improve SP and NPY levels.[PJMS3][4].

The effect of integrity of lesser tuberosity-medial calcar on postoperative outcome in the proximal humeral fracture.

BACKGROUND: In proximal humeral fractures, the medial calcar is often considered an important stabilizing structure. When the medial calcar is disrupted, some patients may have accompanying humeral lesser tuberosity comminution that has not been noticed. To investigate the impacts of comminuted fragments of lesser tuberosity and calcar on postoperative stability, CT results, number of fragments, cortical integrity, and the variation of neck-shaft angle were compared in patients with proximal humeral fractures. MATERIALS AND METHODS: From April 2016 to April 2021, this study included patients with senile proximal humeral fractures diagnosed by CT three-dimensional reconstruction with lesser tuberosity fractures and medial column injuries. The number of fragments in the lesser tuberosity and the continuity of medial calcar were evaluated. Postoperative stability and shoulder function were evaluated by comparing changes in neck-shaft angle and the DASH upper extremity function score from 1 week to 1 year after the operation. RESULTS: A total of 131 patients were included in the study, and the results showed that the number of fragments of the lesser tuberosity was related to the integrity of the medial cortex of the humerus. That is, when there were more than two lesser tuberosity fragments, the integrity of humeral medial calcar was poor. The positive rate of the lift-off test was higher in patients with lesser tuberosity comminutions 1 year after surgery. In addition, patients with more than two lesser tuberosity fragments and continuous destruction of the medial calcar had large variations in the neck-shaft angle, high DASH scores, poor postoperative stability, and poor recovery of shoulder joint function 1 year postoperatively. CONCLUSION: The number of humeral lesser tuberosity fragments and the integrity of the medial calcar were associated with the collapse of the humeral head and the decrease in shoulder joint stability after the proximal humeral fracture surgery. When the number of lesser tuberosity fragments was greater than two and the medial calcar was damaged, the proximal humeral fracture had poor postoperative stability and poor functional recovery of the shoulder joint, which required auxiliary internal fixation treatment.

In vitro analysis and in vivo assessment of fracture complications associated with use of locking plate constructs for stabilization of caprine tibial segmental defects.

PURPOSE: Locking plate fixation of caprine tibial segmental defects is widely utilized for translational modeling of human osteopathology, and it is a useful research model in tissue engineering and orthopedic biomaterials research due to its inherent stability while maintaining unobstructed visualization of the gap defect and associated healing. However, research regarding surgical technique and long-term complications associated with this fixation method are lacking. The goal of this study was to assess the effects of surgeon-selected factors including locking plate length, plate positioning, and relative extent of tibial coverage on fixation failure, in the form of postoperative fracture. METHODS: In vitro, the effect of plate length was evaluated using single cycle compressive load to failure mechanical testing of locking plate fixations of caprine tibial gap defects. In vivo, effects of plate length, positioning, and relative tibial coverage were evaluated using data from a population of goats enrolled in ongoing orthopedic research which utilized locking plate fixation of 2 cm tibial diaphyseal segmental defects to evaluate bone healing over 3, 6, 9, and 12 months. RESULTS: In vitro, no significant differences in maximum compressive load or total strain were noted between fixations using 14 cm locking plates and 18 cm locking plates. In vivo, both plate length and tibial coverage ratio were significantly associated with postoperative fixation failure. The incidence of any cortical fracture in goats stabilized with a 14 cm plate was 57%, as compared with 3% in goats stabilized with an 18 cm plate. Craniocaudal and mediolateral angular positioning variables were not significantly associated with fixation failure. Decreasing distance between the gap defect and the proximal screw of the distal bone segment was associated with increased incidence of fracture, suggesting an effect on proximodistal positioning on overall fixation stability. CONCLUSIONS: This study emphasizes the differences between in vitro modeling and in vivo application of surgical fixation methods, and, based on the in vivo results, maximization of plate-to-tibia coverage is recommended when using locking plate fixation of the goat tibial segmental defect as a model in orthopedic research.

Retrospective Comparative Study of Clinical Outcomes and Cost-Effectiveness with Bone Substitutes on Volar Locking Plate Fixation of Unstable Distal Radial Fractures in the Elderly.

Background: This multicenter retrospective study aimed to compare clinical outcomes and cost-effectiveness with bone substitutes on volar locking plate (VLP) fixation of unstable distal radial fractures (DRF) in the elderly. Methods: The data of 1,980 patients of ≥65 years of age who underwent surgery for the DRF with a VLP in 2015-2019 were extracted from a database (named TRON). Patients lost to follow-up or who received autologous bone grafting were excluded. The patients (n = 1,735) were divided into the VLP fixation alone (Group VLA) and VLP fixation with bone substitutes (Group VLS). Propensity score matching of background characteristics (ratio, 4:1) was performed. The modified Mayo wrist scores (MMWS) were evaluated as clinical outcomes. The implant failure rate, bone union rate, volar tilt (VT), radial inclination (RI), ulnar variance (UV) and distal dorsal cortical distance (DDD) were evaluated as radiologic parameters. We also compared the initial surgery cost and total cost for each group. Results: After matching, the backgrounds of Groups VLA (n = 388) and VLS (n = 97) were not significantly different. The MMWS values of the groups were not significantly different. Radiographic evaluation revealed no implant failure in either group. Bone union was confirmed in all patients in both groups. The VT, RI, UV and DDD values of the groups were not significantly different. The initial surgery cost and total cost in the VLS group were significantly higher than those in the VLA group ($3,515 vs. $3,068, p < 0.001). Conclusions: In patients of ≥65 years of age with DRF, the clinical and radiological outcomes of VLP fixation with bone substitutes did not differ from those of VLP fixation alone, yet the additional use of bone augmentation was associated with higher medical costs. The indications for bone substitutes should be more strictly considered in the elderly with DRF. Level of Evidence: Level IV (Therapeutic).

Treatment Reality of Proximal Humeral Fractures in the Elderly-Trending Variants of Locking Plate Fixation in Germany.

BACKGROUND: The surgical treatment of proximal humeral fractures (PHFs) with locking plate fixation (LPF) in the elderly is associated with high complication rates, especially in osteoporotic bone. Variants of LPF such as additional cerclages, double plating, bone grafting and cement augmentation can be applied. The objective of the study was to describe the extent of their actual use and how this changed over time. METHODS: Retrospective analysis of health claims data of the Federal Association of the Local Health Insurance Funds was performed, covering all patients aged 65 years and older, who had a coded diagnosis of PHF and were treated with LPF between 2010 and 2018. Differences between treatment variants were analyzed (explorative) via chi-squared or Kruskal-Wallis tests. RESULTS: Of the 41,216 treated patients, 32,952 (80%) were treated with LPF only, 5572 (14%) received additional screws or plates, 1983 (5%) received additional augmentations and 709 (2%) received a combination of both. During the study period, relative changes were observed as follows: -35% for LPF only, +58% for LPF with additional fracture fixation and +25% for LPF with additional augmentation. Overall, the intra-hospital complication rate was 15% with differences between the treatment variants (LPF only 15%, LPF with additional fracture fixation 14%, LPF with additional augmentation 19%; p < 0.001), and a 30-day mortality of 2%. CONCLUSIONS: Within an overall decrease of LPF by approximately one-third, there is both an absolute and relative increase of treatment variants. Collectively, they account for 20% of all coded LPFs, which might indicate more personalized treatment pathways. The leading variant was additional fracture fixation using cerclages.

Comparison of surgical treatments for distal ulna fracture when combined with anterior locking plate fixation of distal radius in the over 70 age group.

We conducted a retrospective multicentre study to compare the clinical and radiographic outcomes, and complications of three surgical treatments of distal ulna fracture (DUF) when combined with anterior locking plate fixation for distal radial fracture (DRF) in patients over 70 years of age. We identified 1521 patients over 70 years of age who were diagnosed as having DRF and who underwent anterior locking plate fixation between 2015 and 2020, among which 122 cases of DUF were analysed. Three surgical treatment options for DUF were identified in this cohort: K-wire fixation (Group K), locking plate fixation (Group L) and Darrach procedure (Group D). The results of the analysis showed the total immobilization period in Group D to be the shortest among the three treatments. Functional outcomes were superior, and the rate of complications were smaller in Group D than in Group L. In addition, rotational range of motion was larger in Group D and Group L compared with Group K. In patients who are 70 years of age or older with combined unstable DRF and highly comminuted or displaced DUF, the Darrach procedure for DUF seems to be the most useful and reasonable treatment option once the fracture of the distal radius has been rigidly fixed.Level of evidence: IV.

How to improve the biomechanical stability of endosteal augmentation for proximal humerus fracture with osteopenia? A cadaveric study.

BACKGROUND: Endosteal augmentation enhances the stability of osteoporotic proximal humeral fracture fixation, but the optimal configuration is unknown. The purpose of this study was to compare the biomechanical properties of different lengths of fibula with or without calcar screw in osteoporotic proximal humeral fracture. METHODS: Three-part proximal humeral fractures with osteopenia were created on 20 pairs of fresh-frozen humeri specimens and allocated to four groups: (1) locking plate with a 6-cm fibular strut allograft, (2) locking plate with a 6-cm fibular strut allograft and additional calcar screws, (3) locking plate with a 12-cm fibular strut allograft，and (4) locking plate with a 12-cm fibular strut allograft and additional calcar screws. Specimens were loaded to simulate the force at 25° abduction. Thereafter, an axial stiffness test and a compound cyclic load to failure test were applied. Structural stiffness, number of cycles loaded to failure and relative displacement values for 5000 cycles at predetermined measurement points were recorded using a testing machine and a synchronized 3D video tracking system. FINDINGS: In terms of initial stiffness, number of cycles loaded to failure, and relative displacement values, the groups with 12-cm fibular strut showed obvious improvement compared to the groups with 6-cm fibular strut irrespective of the influence of calcar screw implementation. Further, the groups implemented with calcar screws also showed promising biomechanical stability irrespective of fibular length. INTERPRETATION: Lateral locking plate with longer endosteal fibular augmentation and calcar screw can significantly improve biomechanical stability for elderly proximal humeral fractures with posteromedial comminution.

Comparison of screw versus locking plate fixation via sinus tarsi approach for displaced intra-articular calcaneal fractures.

BACKGROUND: The optimal treatment of displaced intra-articular calcaneal fractures (DIACF) is controversial. This study compared the fixation stability of screws and locking plates in DIACF treated via the sinus tarsi approach (STA). METHODS: We retrospectively evaluated 118 DIACF cases treated via STA and extracted data that could affect treatment outcomes. Loss of Böhler's angle after surgery was measured to compare fixation stability. RESULTS: The loss of Böhler's angles was significantly smaller in the locking plate group than in the screw group (2.6 ± 2.7º vs. 5.6 ± 5.3º, P < 0.01). There was no difference in the clinical outcomes between the groups. On multivariate logistic regression analysis, screw fixation was significantly associated with loss of Böhler's angle by> 10º (odds ratio, 8.63; 95% confidence interval, 1.16-64.4; P < 0.05). CONCLUSIONS: Locking plate fixation is more reliable than screw fixation for preventing correction loss in DIACF treated via STA. LEVEL OF EVIDENCE: III.

Locking plate versus retrograde intramedullary headless compression screw for unstable extra-articular metacarpal base fractures of the thumb.

The purpose was to compare clinical and radiological outcomes between two fixation techniques used to treat extra-articular fractures involving the base of the thumb metacarpal: retrograde intramedullary cannulated headless screw (RICHS) and locking plate (LP). Fifty-one patients who underwent RICHS (n = 22) or LP fixation (n = 29) from January 2010 through 2020 were included in this retrospective case-control study with mean follow-up 39 months. No inter-group differences were observed comparing mean time to radiological union, grip strength, range of motion, pain severity or QuickDASH scores. Mean surgery time was shorter with RICHS (18.9 min) than with LP fixation (44.4 min). Mean time to return to work or routine activities was less in RICHS than LP (22 vs. 32 days), as was the percentage of patients requiring hardware removal (0% vs. 44.8%). We conclude that RICHS fixation requires less operating time and yields faster post-operative return to full function and fewer secondary procedures.

Distal third clavicle fractures : a nationwide trainee-led collaborative review of current practice.

AIMS: Distal third clavicle (DTC) fractures are increasing in incidence. Due to their instability and nonunion risk, they prove difficult to treat. Several different operative options for DTC fixation are reported but current evidence suggests variability in operative fixation. Given the lack of consensus, our objective was to determine the current epidemiological trends in DTC as well as their management within the UK. METHODS: A multicentre retrospective cohort collaborative study was conducted. All patients over the age of 18 with an isolated DTC fracture in 2019 were included. Demographic variables were recorded: age; sex; side of injury; mechanism of injury; modified Neer classification grading; operative technique; fracture union; complications; and subsequent procedures. Baseline characteristics were described for demographic variables. Categorical variables were expressed as frequencies and percentages. RESULTS: A total of 859 patients from 18 different NHS trusts (15 trauma units and three major trauma centres) were included. The mean age was 57 years (18 to 99). Overall, 56% of patients (n = 481) were male. The most common mechanisms of injury were simple fall (57%; n = 487) and high-energy fall (29%; n = 248); 87% (n = 748) were treated conservatively and 54% (n = 463) were Neer type I fractures. Overall, 32% of fractures (n = 275) were type II (22% type IIa (n = 192); 10% type IIb (n = 83)). With regards to operative management, 89% of patients (n = 748) who underwent an operation were under the age of 60. The main fixation methods were: hook plate (n = 47); locking plate (n = 34); tightrope (n = 5); and locking plate and tight rope (n = 7). CONCLUSION: Our study is the largest epidemiological review of DTC fractures in the UK. It is also the first to review the practice of DTC fixation. Most fractures are being treated nonoperatively. However, younger patients, suffering a higher-energy mechanism of injury, are more likely to undergo surgery. Hook plates are the predominantly used fixation method followed by locking plate. The literature is sparse on the best method of fixation for optimal outcomes for these patients. To answer this, a pragmatic RCT to determine optimal fixation method is required.Cite this article: Bone Jt Open 2022;3(12):953-959.

Comparison of the functional outcomes after treatment of periprosthetic hip fractures with femoral stem loosening: Locking plate fixation with or without femoral stem revision.

INTRODUCTION: Periprosthetic fractures have become one of the main reasons for revision of total hip arthroplasty, with the treatment strategy guided by the Vancouver and SOFCOT classification systems. The main objective of this work was to compare the functional outcomes and mortality rate in patients who suffered a periprosthetic hip fracture with femoral stem loosening and who were treated either by internal fixation with locking plate only, or in combination with revision of the existing femoral stem with a cemented stem. The secondary objective was to compare the blood loss, procedure duration, length of hospital stay, living arrangements, time to weight bearing and major complications between these two treatment strategies. The starting hypothesis was that there is no difference in the functional outcomes between these two groups. MATERIALS AND METHODS: This was a single center, retrospective study of patients treated between 2013 and 2019. Thirty-six patients (54%) underwent femoral stem revision (FSR group) and 31 patients (46%) were treated by locking plate fixation only (ORIF group). In this population, 19 of the patients had been residing at a nursing home before the surgical treatment: 12 (33%) in the FSR group and 7 (23%) in the ORIF group (p=0.33). The mean preoperative Parker score was 7.03 (± 1.48) in the FSR group versus 5.19 (± 1.92) in the ORIF group. The functional outcomes at the final review were evaluated using the Parker score, HHS (Harris Hip score), WOMAC (Western Ontario and McMaster Arthritis Index) and Oxford score. Fracture healing was determined on radiographs centered over the hip joint with the entire femur visible on AP and lateral views. All patients were reviewed at a minimum of 1 year for clinical and radiological assessments. RESULTS: At a mean follow-up of 28 months [12-85], the Oxford score was 40.4 (± 10.6) in the FSR group versus 37.1 (± 13.5) in the ORIF group (p=0.34), WOMAC of 45.5 (± 26.9) versus 50.5 (± 32.4) (p=0.56), and HHS of 62.7 (± 25.5) versus 60.3 (± 28.6) (p=0.79). The Parker score at the final assessment was 5.14 (± 1.96) in the FSR group versus 4.64 (± 2.17) in the ORIF group (p=0.33). In the FSR group, 10 patients were at a nursing home (34%), 6 of whom were not there initially, versus 6 in the ORIF group (43%), 5 of whom were not there initially (p=0.59). The mean operating time was 152±41.4 minutes (minimum: 85; maximum: 254) in the FSR group versus 89.2 (± 44.1) minutes (minimum: 39; maximum: 280) in the ORIF group (p<0.001). Resumption of full weight bearing occurred at 6 weeks in 21 patients (58%) in the FSR group versus 14 patients (47%) in the ORIF group (p=0.023). There were 5 major complications (14%) in the FSR group versus 7 (23%) in the ORIF group (p=0.35). Among the reviewed patients, the union rate was 86% on the latest radiographs in the FSR group versus 78% in the ORIF group. DISCUSSION: There was no statistically significant difference between groups in the various functional scores, confirming our study hypothesis. Internal fixation with a locking plate appears to be an acceptable solution for treating periprosthetic hip fractures in which the femoral stem has loosened. LEVEL OF EVIDENCE: III, comparative retrospective study.

[Change in the treatment of patellar fractures]. / Wandel in der Behandlung der Patellafrakturen.

BACKGROUND: Fractures of the patella can lead to substantial functional impairments due to its crucial function in the extensor mechanism of the knee joint. Patellar fractures are associated with a comparatively high complication rate depending on the osteosynthesis procedure used. Despite established diagnostics and various osteosynthesis procedures they are still a therapeutic challenge. OBJECTIVE: This article gives an overview of the change in the treatment of patellar fractures and highlights the importance of comprehensive diagnostics and fracture-adapted treatment, especially for the increasing fractures in old age. MATERIAL AND METHODS: Evaluation of the current literature, discussion of biomechanical and clinical studies and expert recommendations (guidelines) RESULTS: Tension band wiring is still the most commonly used procedure; however, it is associated with a high rate of implant-related complications and failure rates. In particular, multifragmented comminuted fractures can often not be adequately treated by tension band wiring. Anterior locking plates seem to be biomechanically and clinically superior. CONCLUSION: For a good functional result after a patellar fracture, the fracture morphology must be completely understood and the optimal choice of the osteosynthesis method is crucial. Distal (or proximal) pole fractures and the increasing number of osteoporotic fractures of old patients due to the demographic change, remain a therapeutic challenge and require special consideration in the selection of the osteosynthesis procedure.