Magnetic nanomaterials mediate precise magnetic therapy.

Magnetic nanoparticle (MNP)-mediated precision magnet therapy plays a crucial role in treating various diseases. This therapeutic strategy compensates for the limitations of low spatial resolution and low focusing of magnetic stimulation, and realizes the goal of wireless teletherapy with precise targeting of focal areas. This paper summarizes the preparation methods of magnetic nanomaterials, the properties of magnetic nanoparticles, the biological effects, and the measurement methods for detecting magnetism; discusses the research progress of precision magnetotherapy in the treatment of psychiatric disorders, neurological injuries, metabolic disorders, and bone-related disorders, and looks forward to the future development trend of precision magnet therapy. .

Heat absorption effect of magneto-natural convection flow in vertical concentric annuli with influence of radial and induced magnetic field.

This paper aims to study the natural convective magneto-hydrodynamic flow of fluid through vertical concentric annuli with iso-flux heating under the conditions of constant internal heat absorption and an induced magnetic field. By solving the set of dimensionless coupled governing equations, we were able to obtain exact expressions for the temperature field, velocity field, and induced magnetic field. We also managed to derive the formulas for skin friction, mass flux, and induced current density. We also examined the effects of non-dimensional parameters on skin friction and mass flux. For easy comprehension and interpretation, the results are provided graphically and in tabular form. The heat absorption parameter, the induced current density, the induced magnetic field, and velocity exhibit a negative trend as the Hartmann number (Ha) value increases. The induced magnetic field has the effect of raising both the induced current density and velocity profile. It is found that, when a fluid absorbs heat, the heat absorption parameter experiences reverse flow. For the heat-absorbing fluids, the radii ratio has the effect of increasing velocity, induced magnetic field, and induced current density. The numerical values of skin friction and mass flux at cylindrical walls increase (decrease) with increasing heat absorption parameter and generally it has decreasing tendency with increasing Hartmann number.

Palliative effect of rotating magnetic field on glucocorticoid-induced osteonecrosis of the femoral head in rats by regulating osteoblast differentiation.

With the substantial increase in the overuse of glucocorticoids (GCs) in clinical medicine, the prevalence of glucocorticoid-induced osteonecrosis of the femoral head (GC-ONFH) continues to rise in recent years. However, the optimal treatment for GC-ONFH remains elusive. Rotating magnetic field (RMF), considered as a non-invasive, safe and effective approach, has been proved to have multiple beneficial biological effects including improving bone diseases. To verify the effects of RMF on GC-ONFH, a lipopolysaccharide (LPS) and methylprednisolone (MPS)-induced invivo rat model, and an MPS-induced invitro cell model have been employed. The results demonstrate that RMF alleviated bone mineral loss and femoral head collapse in GC-ONFH rats. Meanwhile, RMF reduced serum lipid levels, attenuated cystic lesions, raised the expression of anti-apoptotic proteins and osteoprotegerin (OPG), while suppressed the expression of pro-apoptotic proteins and nuclear factor receptor activator-κB (RANK) in GC-ONFH rats. Besides, RMF also facilitated the generation of ALP, attenuated apoptosis and inhibits the expression of pro-apoptotic proteins, facilitated the expression of OPG, and inhibited the expression of RANK in MPS-stimulated MC3T3-E1 cells. Thus, this study indicates that RMF can improve GC-ONFH in rat and cell models, suggesting that RMF have the potential in the treatment of clinical GC-ONFH.

The positive effect of pulse electromagnetic field therapy on pain and disability in chronic low back pain: a comparative study.

BACKGROUND: Low back pain that lasts longer than three months is called chronic low back pain. Chronic low back pain is among the most common problems in the world, causing severe disability and loss of employment in patients. OBJECTIVE: To investigate the effect of pulse electromagnetic field therapy (PEMFT) added to routine physical therapy on pain and functional status in patients with chronic low back pain. METHODS: This retrospective comparative study included 69 patients with chronic low back pain. The patients were divided into two groups: those who received lumbar transcutaneous electrical nerve stimulation, infrared, and ultrasound treatments, and those who additionally received PEMFT. The files of patients with chronic low back pain were reviewed, and those who had been evaluated using the Quebec Back Pain Disability Scale (QBPDS) in terms of functional capacity and effects of low back pain and the Visual Analogue Scale (VAS) for pain both before and after treatment were included in the study. RESULTS: No significant difference was detected between the two groups' pretreatment VAS and QBPDS scores (p > 0.05). The second-and-third measurement scores of both groups were significantly lower than their first-measurement VAS and QBPDS scores (p ˂ 0.001), but there was no significant difference between their second- and third-measurement scores (p > 0.05). According to the inter-group comparison of the VAS and QBPDS scores, the second and third-measurement scores of the PEMFT group were significantly lower than those of the control group (p ˂ 0.001). CONCLUSIONS: PEMFT seems to be able to alleviate pain intensity and ameliorate disability in patients with chronic low back pain. PEMFT can be considered an effective and safe option that can be added to routine physical therapy modalities for relieving chronic low back pain frequently encountered in clinical practice. Further studies validating the effectiveness of PEMFT could strengthen its position in the management of chronic low back pain.

Research on Spatial Magnetic Field Distribution of Magnetic Fluids Based on Microstructure.

This study focuses on the spatial magnetic field distribution of magnetic fluids, an extraordinary class of fluids composed of magnetic nanoparticles (MNPs), employing the Monte Carlo method to simulate the microstructure of magnetic fluids under an external magnetic field. On that basis, a model was established through magnetic dipole theory to delve into the spatial magnetic field distribution of magnetic fluids. The findings reveal that the application of a magnetic field leads to the formation of chain-like structures within the magnetic fluids, resulting in inhomogeneous spatial magnetic field distribution. The size and concentration of MNPs are crucial determinants that significantly affect the microstructure of magnetic fluid and its spatial magnetic field distribution. Furthermore, environmental conditions such as external magnetic field strength or temperature can also regulate the positions of MNPs within magnetic fluids and the spatial magnetic field distribution of the magnetic fluids. These observations enrich the comprehension of the fundamental mechanisms of magnetic fluids and their response to diverse factors, advancing the growing comprehension on the characteristics and applications of these remarkable magnetic fluids.

Effect of colloidal magnetite (Fe3O4) nanoparticles on the electrical characteristics of the azolectin bilayer in a static inhomogeneous magnetic field.

This work is devoted to the study of the combined effects of applied magnetic field and MNPs on the electrical characteristics of bilayer lipid membranes. We present results of the study of electrical parameters of azolectin membranes in a static inhomogeneous magnetic field at the one-sided addition of positively charged quasi-spherical superparamagnetic magnetite nanoparticles with a diameter of about 4 nm. The magnet was located at different distances from the membrane, and the magnetic field attracted the nanoparticles to the membrane surface with different strengths. We observed three pronounced effects that depended on the external magnetic field. Firstly, after addition of nanoparticles in a magnetic field, the conductance of the membranes increased. A smooth increase in conductance was accompanied in some cases by the appearance of current jumps, which can be associated with the formation of through pores with a radius of no more than 1 nm. The conductance increased with increasing magnetic field gradient. Secondly, at zero command voltage, a negative current through the membrane was observed. Although our experiments did not allow us to unambiguously determine which particles create this current, we believe that this current is associated with the penetration of particles through the membrane. This effect intensified with increasing magnetic field gradient. Thirdly, we observed a sharp change in the nonlinear dependence of capacitance on voltage associated both with the change in the surface potential of the azolectin membrane and with the effect of MNP binding to the membrane surface on the apparent membrane capacitance.

Study of internal heat source, rotation, magnetic field, and initial stress influence on p-waves propagation in a photothermal semiconducting medium.

The purpose of the current study is to establish a novel mathematical model in the p-waves in a photothermal semiconducting medium with an internal heat source. The fundamental equations in the context of isotropic and homogeneous medium have been presented. For the solution of the required problem, the normal mode analysis along with the displacement components, stress components and temperature has been utilized. For graphical representation of different physical quantities such as displacement components, stress components and carrier density as well as the temperature distribution. Using MATLAB R2023a software, a parametric analysis is performed, and the resulting data is represented graphically. A comparison is made to show the effect of the new parameters on the phenomenon. A graphic representation of the relationship between rotation, magnetic field, and initial stress in relation to the fluctuations in non-dimensional field quantities is provided, along with an analysis of the findings.

Key influence factors in magneto-controlled motion of micro-nano graphite flakes.

Magneto-controlling micro-nano materials' motion is a promising way that enable the noncontact, remote, and nondestructive controlling of their macrostructure as well as functionalities. Here, an optical microscope with an electromagnet was constructed toin-situmonitor the magneto-controlled motion process microscopically. Taking micro-nano graphite flake (MGF) as a model system, we experimentally demonstrate the key factors that influence the magneto-controlling of materials' motion. First, the product of intensity and gradient of the magnetic field (B∇B) has been confirmed as the dominant driving force and the flipping direction of the MGFs is accordingly determined by the vector direction ofB×∇B. Second, quantitatively comparative experiments further revealed that the threshold driving force has an exponential relationship with the structural aspect ratio (b/a) of MGFs. Third, the critical magneto-driving force is found as proportional to the viscosity of the solvent. Accordingly, a dynamic model is developed that describes the flip of the diamagnetic flake under external magnetic field excitation considering the shape factor. It is shown experimentally that the model accurately predicts the flip dynamics of the flake under different magnetic field conditions. In addition, we also discovered the delay effect, multiple cycle acceleration effect, and the fatigue effects due to gas adsorption in magneto-controlled MGFs flipping. These findings can be used to achieve magneto-controlling materials' macrostructure as well as their functionalities.

Electronic instability in pressured black phosphorus under strong magnetic field.

In this paper, we have systematically studied the electronic instability of pressured black phosphorous (BP) under strong magnetic field. We first present an effective model Hamiltonian for pressured BP near theLifshitzpoint. Then we show that when the magnetic field exceeds a critical value, the nodal-line semimetal (NLSM) state of BP with a small band overlap re-enters the semiconductive phase by re-opening a small gap. This results in a narrow-bandgap semiconductor with a partially flat valence band edge. Moreover, we demonstrate that above this critical magnetic field, two possible instabilities, i.e. charge density wave phase and excitonic insulator (EI) phase, are predicted as the ground state for high and low doping concentrations, respectively. By comparing our results with the experiment (Sunet al2018Sci. Bull.631539), we suggest that the field-induced instability observed experimentally corresponds to an EI. Furthermore, we propose that the semimetallic BP under pressure with small band overlaps may provide a good platform to study the magneto-exciton insulators. Our findings bring the first insight into the electronic instability of topological NLSM in the quantum limit.

Magnetic Field-induced Disordered Phase of Spinel Oxides for High Battery Performance.

The disordered phase of spinel LiMn1.5Ni0.5O4 (LNMO) is more appealing as high-voltage cathode due to its superior electrochemical performance compared to its ordered counterpart. Various methods are developed to induce a phase transition. However, the resulting materials often suffer from capacity degradation due to the adverse influence of accompanying Mn3+ ions. This study presents the utilization of local magnetic fields generated by a magnetic Fe3O4 shell to induce a disordered phase transition in LNMO at lower temperature, transitioning it from an order state without significantly increasing the Mn3+ content. The pivotal role played by the local magnetic fields is evidenced through comparisons with samples with nonmagnetic Al2O3 shell, samples subjected to sole heat treatment, and samples heat-treated within magnetic fields. The key finding is that magnetic fields can initiate a radical pair mechanism, enabling the induction of order-disorder phase transition even at lower temperatures. The disordered spinal LNMO with a magnetic Fe3O4 shell exhibits excellent cycling stability and kinetic properties in electrochemical characterization as a result. This innovation not only unravels the intricate interplay between the disordered phase and Mn3+ content in the cathode spinel but also pioneers the use of magnetic field effects for manipulating material phases.

Exploiting and Enhancing the Heat Transport Rate of MoS2-Ag/EO Hybrid Nanofluid Flow via a Stretching Cylinder using Extended Yamada-Ota and Xue Models.

The current model offers valuable insights for materials science, heat exchangers, renewable energy production, nanotechnology, manufacturing, medicinal treatments, and environmental engineering. The findings of this study have the potential to improve material design, increase heat transfer efficiency across various systems, enhance energy conversion processes, and drive advancements in nanotechnology, medicinal treatments, and engineering design. The goal of the current research is to analyze the effects of thermal radiation and the volume fraction of nanoparticles in MoS2-Ag/engine oil-based hybrid nanofluid flow passing through a cylinder. After performing a substantial similarity transformation, the nonlinear dimensionless framework is recast as ODEs. The Yamada-Ota and Xue models are then applied to the dimensionless equation setup, which is numerically solved using the BVP4C approach. The resulting velocity and temperature fields, corresponding to various parameters, are examined and compared across both models. This investigation demonstrates a significant variation in heat transfer rates between the Yamada-Ota and Xue models, with the former having a larger impact. The velocity and temperature fields decrease as the magnetic field parameter increases in both nanofluids. However, as the magnetic field parameter values grow, the velocity fields in the two nanofluids behave differently. The Yamada-Ota and Xue models are used to determine the behavior of the hybrid nanofluid flow over a nonlinear extended cylinder. In all situations, the velocity and temperature fields exhibit superior decay characteristics.

Influence of Excitation Parameters on Finishing Characteristics in Magnetorheological Finishing for 6063 Aluminum Alloy.

The present work is aimed at studying the effects of the magnetorheological finishing process, using a low-frequency alternating magnetic field, on the finishing performance of 6063 aluminum alloy. The study investigates the influence of key excitation parameters such as current, frequency, excitation gap, and iron powder diameter on the material removal and surface roughness (Ra) of the finished workpiece by experiments. This study employs a single-factor experimental method, and the finish surface is analyzed by a Zigo non-contact white light interferometer. The magnetic field strength in the processing area increases with the increase in the excitation current and decreases with the increase in the excitation gap. When the current frequency is set to 1 Hz, the circulation and renewal of abrasives in the magnetic cluster is most sufficient, resulting in the optimal surface roughness value for the workpiece. According to the experimental results of the excitation parameters, more suitable process parameters were selected for a two-stage finishing experiment. The surface roughness of 6063 aluminum alloy was improved from 285 nm to 3.54 nm. Experimental results highlighted that the magnetorheological finishing using a low-frequency alternating magnetic field is a potential technique for obtaining nano-scale finishing of the 6063 aluminum alloy.

Residual Magnetic Field Testing System with Tunneling Magneto-Resistive Arrays for Crack Inspection in Ferromagnetic Pipes.

Ferromagnetic pipes are widely used in the oil and gas industry. They are subject to cracks due to corrosion, pressure, and fatigue. It is significant to detect cracks for the safety of pipes. A residual magnetic field testing (RMFT) system is developed for crack detection in ferromagnetic pipes. Based on this background, a detection probe based on an array of tunneling magneto-resistive (TMR) sensors and permanent magnets is exploited. The probe is able to partially magnetize the pipe wall and collect magnetic signals simultaneously. First, a theoretical analysis of RMFT is presented. The physics principle of RMFT is introduced, and a finite element model is built. In the finite element simulations, the effects of the crack length and depth on the RMFT signal are analyzed, and the signal characteristics are selected to represent the crack size. Next, the validated experiments are conducted to demonstrate the feasibility of the proposed RMFT method in this paper.

Dependence of Magnetic Properties of As-Prepared Nanocrystalline Ni2MnGa Glass-Coated Microwires on the Geometrical Aspect Ratio.

We have prepared NiMnGa glass-coated microwires with different geometrical aspect ratios, ρ = dmetal/Dtotal (dmetal-diameter of metallic nucleus, and Dtotal-total diameter). The structure and magnetic properties are investigated in a wide range of temperatures and magnetic fields. The XRD analysis illustrates stable microstructure in the range of ρ from 0.25 to 0.60. The estimations of average grain size and crystalline phase content evidence a remarkable variation as the ρ-ratio sweeps from 0.25 to 0.60. Thus, the microwires with the lowest aspect ratio, i.e., ρ = 0.25, show the smallest average grain size and the highest crystalline phase content. This change in the microstructural properties correlates with dramatic changes in the magnetic properties. Hence, the sample with the lowest ρ-ratio exhibits an extremely high value of the coercivity, Hc, compared to the value for the sample with the largest ρ-ratio (2989 Oe and 10 Oe, respectively, i.e., almost 300 times higher). In addition, a similar trend is observed for the spontaneous exchange bias phenomena, with an exchange bias field, Hex, of 120 Oe for the sample with ρ = 0.25 compared to a Hex = 12.5 Oe for the sample with ρ = 0.60. However, the thermomagnetic curves (field-cooled-FC and field-heating-FH) show similar magnetic behavior for all the samples. Meanwhile, FC and FH curves measured at low magnetic fields show negative values for ρ = 0.25, whereas positive values are found for the other samples. The obtained results illustrate the substantial effect of the internal stresses on microstructure and magnetic properties, which leads to magnetic hardening of samples with low aspect ratio.

Rotating magnetic field improved cognitive and memory impairments in a sporadic ad model of mice by regulating microglial polarization.

Neuroinflammation, triggered by aberrantly activated microglia, is widely recognized as a key contributor to the initiation and progression of Alzheimer's disease (AD). Microglial activation in the central nervous system (CNS) can be classified into two distinct phenotypes: the pro-inflammatory M1 phenotype and the anti-inflammatory M2 phenotype. In this study, we investigated the effects of a non-invasive rotating magnetic field (RMF) (0.2T, 4Hz) on cognitive and memory impairments in a sporadic AD model of female Kunming mice induced by AlCl3 and D-gal. Our findings revealed significant improvements in cognitive and memory impairments following RMF treatment. Furthermore, RMF treatment led to reduced amyloid-beta (Aß) deposition, mitigated damage to hippocampal morphology, prevented synaptic and neuronal loss, and alleviated cell apoptosis in the hippocampus and cortex of AD mice. Notably, RMF treatment ameliorated neuroinflammation, facilitated the transition of microglial polarization from M1 to M2, and inhibited the NF-кB/MAPK pathway. Additionally, RMF treatment resulted in reduced aluminum deposition in the brains of AD mice. In cellular experiments, RMF promoted the M1-M2 polarization transition and enhanced amyloid phagocytosis in cultured BV2 cells while inhibiting the TLR4/NF-кB/MAPK pathway. Collectively, these results demonstrate that RMF improves memory and cognitive impairments in a sporadic AD model, potentially by promoting the M1 to M2 transition of microglial polarization through inhibition of the NF-кB/MAPK signaling pathway. These findings suggest the promising therapeutic applications of RMF in the clinical treatment of AD.

Application of electrostimulation and magnetic stimulation in patients with optic neuropathy: A mechanistic review.

Visual impairment caused by optic neuropathies is irreversible because retinal ganglion cells (RGCs), the specialized neurons of the retina, do not have the capacity for self-renewal and self-repair. Blindness caused by optic nerve neuropathies causes extensive physical, financial, and social consequences in human societies. Recent studies on different animal models and humans have established effective strategies to prevent further RGC degeneration and replace the cells that have deteriorated. In this review, we discuss the application of electrical stimulation (ES) and magnetic field stimulation (MFS) in optic neuropathies, their mechanisms of action, their advantages, and limitations. ES and MFS can be applied effectively in the field of neuroregeneration.. Although stem cells are becoming a promising approach for regenerating RGCs, the inhibitory environment of the CNS and the long visual pathway from the optic nerve to the superior colliculus are critical barriers to overcome. Scientific evidence has shown that adjuvant treatments, such as the application of ES and MFS help direct thetransplanted RGCs to extend their axons and form new synapses in the central nervous system (CNS). In addition, these techniques improve CNS neuroplasticity and decrease the inhibitory effects of the CNS. Possible mechanisms mediating the effects of electrical current on biological tissues include the release of anti-inflammatory cytokines, improvement of microcirculation, stimulation of cell metabolism, and modification of stem cell function. ES and MFS have the potential to promote angiogenesis, direct axon growth toward the intended target, and enhance appropriate synaptogenesis in optic nerve regeneration.

Effects of 16.8-22.0 T high static magnetic fields on the development of zebrafish in early fertilization.

OBJECTIVES: Despite some existing studies on the safety of high static magnetic fields (SMFs), the effects of ultra-high SMFs above 20.0 T for embryonic development in early pregnancy are absent. The objective of this study is to evaluate the influence of 16.8-22.0 T SMF on the development of zebrafish embryos, which will provide important information for the future application of ultra-high field magnetic resonance imaging (MRI). METHODS: Two-hour exposure to homogenous (0 T/m) 22.0 T SMF, or 16.8 T SMFs with 123.25 T/m spatial gradient of opposite magnetic force directions was examined in the embryonic development of 200 zebrafish. Their body length, heart rate, spontaneous tail-wagging movement, hatching and survival rate, photomotor response, and visual motor response (VMR) were analyzed. RESULTS: Our results show that these ultra-high SMFs did not significantly affect the general development of zebrafish embryos, such as the body length or spontaneous tail-wagging movement. However, the hatching rate was reduced by the gradient SMFs (p < 0.05), but not the homogenous 22.0 T SMF. Moreover, although the zebrafish larva activities were differentially affected by these ultra-high SMFs (p < 0.05), the expression of several visual and neurodevelopmental genes (p < 0.05) was generally downregulated in the eyeball. CONCLUSIONS: Our findings suggest that exposure to ultra-high SMFs, especially the gradient SMFs, may have adverse effects on embryonic development, which should cause some attention to the future application of ultra-high field MRIs. CLINICAL RELEVANCE STATEMENT: As technology advances, it is conceivable that very strong magnetic fields may be adapted for use in medical imaging. Possible dangers associated with these higher Tesla fields need to be considered and evaluated prior to human use. KEY POINTS: Ultra-High static magnetic field may affect early embryonic development. High strength gradient static magnetic field exposure impacted zebrafish embryonic development. The application of very strong magnetic fields for MR technologies needs to be carefully evaluated.

Exploring the impact of magnetic fields on biomass production efficiency under aerobic and anaerobic batch fermentation of Saccharomyces cerevisiae.

In this work, the effect of moderate electromagnetic fields (2.5, 10, and 15 mT) was studied using an immersed coil inserted directly into a bioreactor on batch cultivation of yeast under both aerobic and anaerobic conditions. Throughout the cultivation, parameters, including CO2 levels, O2 saturation, nitrogen consumption, glucose uptake, ethanol production, and yeast growth (using OD 600 measurements at 1-h intervals), were analysed. The results showed that 10 and 15 mT magnetic fields not only statistically significantly boosted and sped up biomass production (by 38-70%), but also accelerated overall metabolism, accelerating glucose, oxygen, and nitrogen consumption, by 1-2 h. The carbon balance analysis revealed an acceleration in ethanol and glycerol production, albeit with final concentrations by 22-28% lower, with a more pronounced effect in aerobic cultivation. These findings suggest that magnetic fields shift the metabolic balance toward biomass formation rather than ethanol production, showcasing their potential to modulate yeast metabolism. Considering coil heating, opting for the 10 mT magnetic field is preferable due to its lower heat generation. In these terms, we propose that magnetic field can be used as novel tool to increase biomass yield and accelerate yeast metabolism.

Exposure assessment and cytogenetic biomonitoring study of workers occupationally exposed to extremely low-frequency magnetic fields.

Human cytogenetic biomonitoring (HCB) has long been used to evaluate the potential effects of work environments on the DNA integrity of workers. However, HCB studies on the genotoxic effects of occupational exposure to extremely low-frequency electromagnetic fields (ELF-MFs) were limited by the quality of the exposure assessment. More specifically, concerns were raised regarding the method of exposure assessment, the selection of exposure metrics, and the definition of exposure group. In this study, genotoxic effects of occupational exposure to ELF-MFs were assessed on peripheral blood lymphocytes of 88 workers from the electrical sector using the comet and cytokinesis-block micronucleus assay, considering workers' actual exposure over three consecutive days. Different methods were applied to define exposure groups. Overall, the summarized ELF-MF data indicated a low exposure level in the whole study population. It also showed that relying solely on job titles might misclassify 12 workers into exposure groups. We proposed combining hierarchical agglomerative clustering on personal exposure data and job titles to define exposure groups. The final results showed that occupational MF exposure did not significantly induce more genetic damage. Other factors such as age or past smoking rather than ELF-MF exposure could affect the cytogenetic test outcomes.

Repeatability of image quality in very low-field MRI.

BACKGROUND: Very low-field MR has emerged as a promising complementary device to high-field MRI scanners, offering several advantages. One of the key benefits is that very low-field scanners are generally more portable and affordable to purchase and maintain, making them an attractive option for medical facilities looking to reduce costs. Very low-field MRI systems also have lower RF power deposition, making them safer and less likely to cause tissue heating or other safety concerns. They are also simpler to maintain, as they do not require cooling agents such as liquid helium. However, these portable MR scanners are impacted by temperature, lower magnetic field strength, and inhomogeneity, resulting in images with lower signal-to-noise ratio (SNR) and higher geometric distortions. It is essential to investigate and tabulate the variations in these parameters to establish bounds so that subsequent in vivo studies and deployment of these portable systems can be well informed. PURPOSE: The aim of this work is to investigate the repeatability of image quality metrics such as SNR and geometrical distortion at 0.05 T over 10 days and three sessions per day. METHODS: We acquired repeatability data over 10 days with three sessions per day. The measurements included temperature, humidity, transmit frequency, off-resonance maps, and 3D turbo spin echo (TSE) images of an in vitro phantom. This resulted in a protocol with 11 sequences. We also acquired a 3 T data set for reference. The image quality metrics included computing SNR and eccentricity (to assess geometrical distortion) to investigate the repeatability of 0.05 T image quality. The image reconstruction included drift correction, k-space filtering, and off-resonance correction. We computed the experimental parameters' coefficient of variation (CV) and the resulting image quality metrics to assess repeatability. We have explored the impact of electromagnetic interference (EMI) on image quality in very low-field MRI. The investigation involved varying both the distance and amplitude of the EMI-producing coil from the signal generator to analyze their effects on image quality. RESULTS: The range of temperature measured during the study was within 1.5 °C. The off-resonance maps acquired before and after the 3D TSE showed similar hotspots and were changed mainly by a global constant. The SNR measurements were highly repeatable across sessions and over the 10 days, quantified by a CV of 6.7%. The magnetic field inhomogeneity effects quantified by eccentricity showed a CV of 13.7%, but less than 5.1% in two of the three sessions over 10 days. The use of conjugate phase reconstruction mitigated geometrical distortion artifacts. Temperature and humidity did not significantly affect SNR or mean frequency drift within the ranges of these environmental factors investigated. The EMI experiment showed that as the amplitude increased the SNR decreased, and concurrently the root mean square of the background increased with a rise in EMI amplitude or a reduction in distance. CONCLUSIONS: We found that humidity and temperature in the range investigated did not impact SNR or frequency. Based on the CV values computed session-wise and for the overall study, our findings indicate high repeatability for SNR and magnetic field homogeneity.