Is immediate dental implant in fibula free flap beneficial for implant survival and osteoradionecrosis in jaw reconstruction?

OBJECTIVES: This study aimed to compare the risk of osteoradionecrosis and implant survival in oral cancer patients undergoing immediate dental implants during jaw reconstruction, termed "Jaw in a Day" (JIAD), with those receiving no implants or delayed implants (non-JIAD). PATIENTS & METHODS: Clinicopathologic data were collected from prospectively enrolled JIAD patients (n = 10, 29 implants) and retrospectively from non-JIAD patients (n = 117, 86 implants). Survival analyses were performed to assess implant survival and osteoradionecrosis-free survival. RESULTS: Osteoradionecrosis occurred in 0 % of JIAD cases compared to 19.3 % in non-JIAD cases without implants and 71.4 % in non-JIAD cases with delayed implants (p = 0.008). Osteoradionecrosis-free survival was significantly better in the JIAD group than the non-JIAD group (p = 0.0059). Implants in the JIAD group all survived regardless of radiation therapy (29/29, 100 %) and 95.1 % (58/61) of implants survived in delayed implants in non-irradiated fibula without radiotherapy. Meanwhile, only 11 of 25 implants placed in irradiated fibula flaps survived, even when the implants were placed after a median time interval of 624 days after radiotherapy, and none of them were earlier than 360 days. The survival analysis revealed a significant difference (p < 0.0001). CONCLUSION: JIAD appears to offer superior outcomes in terms of implant survival and osteoradionecrosis prevention compared to delayed implant placement. Placing implants in irradiated fibula, even after years, significantly poses high risk of implant failure and osteoradionecrosis. JIAD represents a promising approach for optimal rehabilitation, particularly in oral cancer patients requiring postoperative radiotherapy. Proper positioning and orientation of implants and flaps are crucial for implant survival.

Long-Term Plate Complications in Patient-Specific Plates Utilizing Computer-Aided Design.

OBJECTIVE: Assess the long-term plate complications with patient-specific plates (PSPs) created with computer-aided design (CAD) and computer-aided manufacturing (CAM) for fibula free flap reconstructions for mandibular defects. METHODS: Retrospective chart review from January 2010 to July 2022 of patients who underwent mandibular reconstruction with a fibula free flap and PSP. Primary outcome was plating-related complications, defined as plate exposure, fracture, loose screws, and plate removal. RESULTS: A total of 221 patients underwent PSP fibula reconstruction. Average age was 59.8 + 14.3 years old with male to female ratio of 2:1. Squamous cell carcinoma of the mandible was the most common reason for resection, 47.5%, n = 105. Plate removal occurred in 11% of patients (n = 25) about 17.4 months after the initial surgery. Plates were removed due to exposure (76%, n = 19) or screw loosening (24%, n = 6). Malignancy was associated with an increased risk of plate complications when compared to benign tumor (odds ratio [OR] 9.04, confidence interval [CI] 1.36-3.85), osteonecrosis (OR 1.38, CI 0.59-3.48), and trauma (OR 1.26, CI 0.23-12.8). Postoperative radiation therapy (OR 2.27, CI 1.07-4.82, p = 0.026) and surgical site infection (OR 9.22, CI 4.11-21.88, p = 0.001) were associated with more plate complications. CONCLUSIONS: CAD creates PSPs that remain stable in the majority of patients over the long term. Plate removal is less compared to non-PSP reconstruction. Consideration of the soft tissue envelope over the plate and management of perioperative infection at the time of surgery should be entertained. LEVEL OF EVIDENCE: Level 4 Laryngoscope, 2024.

Long-Term Follow-Up of Computer-Assisted Microvascular Mandibular Reconstruction: A Retrospective Study.

Background: Virtual surgical planning has become a well-established practice in head and neck surgery. In oncological surgery, it permits the achievement of safe margins resections and ensures functional reconstructions and optimal esthetic outcomes. This study aimed to evaluate the long-term outcomes after virtually planned mandibular microvascular reconstruction, focusing on functional and esthetic results, as well as health-related quality of life. Methods: A long-term retrospective evaluation of 17 patients with oral cavity malignancy who underwent computer-assisted mandibular resection and reconstruction was performed. Functional and esthetic outcomes were analyzed using the EORTC, QLQ-C30, H&N35, and FACE-Q questionnaires. Results: Time since reconstruction ranged from 7 to 14 years. Patients reported high functional levels on the QLQ-C30 functional scales but lower scores on H&N35. On FACE-Q, patients demonstrated higher appraisal and satisfaction with their smiles compared to their overall facial appearance. Conclusions: In this retrospective case series, patients undergoing computer-assisted mandibular reconstruction for oral malignancies achieved good long-term functional and esthetic outcomes. Although limited by the small sample size, these results support the enduring benefits of virtual planning for mandibular reconstruction. To minimize declines in function and appearance, considerations should include immediate dental implants, enhanced reconstruction of the temporomandibular joint, newer methods of radiotherapy to minimize xerostomia, and oral exercises to prevent trismus.

Exploring CT pixel and voxel size effect on anatomic modeling in mandibular reconstruction.

BACKGROUND: Computer-aided modeling and design (CAM/CAD) of patient anatomy from computed tomography (CT) imaging and 3D printing technology enable the creation of tangible, patient-specific anatomic models that can be used for surgical guidance. These models have been associated with better patient outcomes; however, a lack of CT imaging guidelines risks the capture of unsuitable imaging for patient-specific modeling. This study aims to investigate how CT image pixel size (X-Y) and slice thickness (Z) impact the accuracy of mandibular models. METHODS: Six cadaver heads were CT scanned at varying slice thicknesses and pixel sizes and turned into CAD models of the mandible for each scan. The cadaveric mandibles were then dissected and surface scanned, producing a CAD model of the true anatomy to be used as the gold standard for digital comparison. The root mean square (RMS) value of these comparisons, and the percentage of points that deviated from the true cadaveric anatomy by over 2.00 mm were used to evaluate accuracy. Two-way ANOVA and Tukey-Kramer post-hoc tests were used to determine significant differences in accuracy. RESULTS: Two-way ANOVA demonstrated significant difference in RMS for slice thickness but not pixel size while post-hoc testing showed a significant difference in pixel size only between pixels of 0.32 mm and 1.32 mm. For slice thickness, post-hoc testing revealed significantly smaller RMS values for scans with slice thicknesses of 0.67 mm, 1.25 mm, and 3.00 mm compared to those with a slice thickness of 5.00 mm. No significant differences were found between 0.67 mm, 1.25 mm, and 3.00 mm slice thicknesses. Results for the percentage of points deviating from cadaveric anatomy greater than 2.00 mm agreed with those for RMS except when comparing pixel sizes of 0.75 mm and 0.818 mm against 1.32 mm in post-hoc testing, which showed a significant difference as well. CONCLUSION: This study suggests that slice thickness has a more significant impact on 3D model accuracy than pixel size, providing objective validation for guidelines favoring rigorous standards for slice thickness while recommending isotropic voxels. Additionally, our results indicate that CT scans up to 3.00 mm in slice thickness may provide an adequate 3D model for facial bony anatomy, such as the mandible, depending on the clinical indication.

Free fibula mandible reconstruction for osteoradionecrosis is more challenging than for primary cancer.

INTRODUCTION: Osteoradionecrosis (ORN) of the mandible is an unfortunate potential sequela of radiotherapy for head and neck cancer. In advanced cases of ORN, mandibulectomy, and free fibula flap reconstruction are required. We hypothesized that patients undergoing fibula free flap reconstruction and mandibulectomy for ORN pose unique challenges and experience more complications than patients undergoing fibula free flaps after oncologic mandibulectomy. METHODS: After IRB approval, we created a database of all free fibula flaps for mandible reconstruction from April 2005 through February 2019. Medical records were retrospectively reviewed for patient and surgical characteristics and postoperative outcomes. RESULTS: Four-hundred seventy-nine patients met the inclusion criteria (168 ORN vs. 311 non-ORN patients). Propensity-matching was performed based on age, BMI, smoking status, preoperative chemotherapy, and virtual surgery planning use, which yielded 159 patients in each group. ORN patients received more double-skin-island fibula flaps than non-OR patients (20.8% vs. 5.7%, p < 0.001). Recipient artery other than the facial artery was utilized more commonly in ORN patients (42.1% vs. 17.0%, p < 0.001). In the unmatched cohort, ORN patients had higher rates of delayed wound healing (26.2% vs. 16.8%, p = 0.01) and surgical site infections (21.4% vs. 13.2%, p = 0.02). Rates of flap loss, return to the operating room, hematoma, operative time, and length of stay were similar between the groups. On logistic regression analysis, osteoradionecrosis was an independent risk factor for delayed wound healing. CONCLUSION: Based on these data, mandibular reconstruction with fibula flaps for osteoradionecrosis appears more complicated than mandible reconstruction following de novo cancer resection. Surgeons should anticipate employing two skin islands for intraoral and extraoral resurfacing, utilizing unconventional recipient vessels, and managing the delayed wound healing that ensues more commonly than non-ORN patients.

An updated protocol for mandibular reconstruction in nongrowing patients with craniofacial microsomia with temporomandibular joint total prosthesis.

The authors aim to present an updated protocol for mandibular reconstruction in nongrowing patients with Pruzansky/Kaban type IIb/III congenital craniofacial microsomia with customized temporomandibular joint (TMJ) prosthesis to reduce facial nerve (FN) damage and improve surgical accuracy. This is illustrated (using 3 cases) and is based on preoperative mapping of the FN using MRI for better virtual surgical planning of custom-made TMJ prosthesis. Intraoperative FN mapping and monitoring, as well as verification of the final result with intraoperative cone-beam computed tomography (CBCT) and 3D-reconstructed images is also achieved. All 3 patients presented mild transient postoperative facial palsy due to surgical soft tissue stretching which resolved within 2 months of surgery. All patients presented proper occlusion and mouth opening without pain, with an average incisal opening of 38.8 mm (range 35.5-42 mm) at two months of follow-up. Moreover, superposition of intraoperative and preoperative 3D reconstruction images ensured surgical accuracy and avoided the need for a potential reintervention. In conclusion, the proposed surgical protocol for mandibular reconstruction with customized alloplastic TMJ prosthesis in nongrowing patients with type IIb/III Pruzansky-Kaban congenital mandibular hypoplasia may reduce FN morbidity, improve surgical accuracy and final outcomes.

Reconstruction of Segmental Mandibular Defects with Double-Barrel Fibula Flap and Osseo-Integrated Implants: A Systematic Review.

Background: Mandibular defects resulting from oncological treatment pose significant aesthetic and functional challenges due to the involvement of bone and soft tissues. Immediate reconstruction is crucial to address complications such as malocclusion, mandibular deviation, temporomandibular joint (TMJ) changes, and soft tissue retraction. These issues can lead to functional impairments, including difficulties in chewing, swallowing, and speech. The fibula flap is widely used for mandibular reconstruction due to its long bone segment and robust vascular supply, though it may not always provide adequate bone height for optimal dental rehabilitation. This systematic review aims to determine if the double-barreled fibula flap (DBFF) configuration is a viable alternative for mandibular reconstruction and to evaluate the outcomes of dental implants placed in this type of flap. Materials and Methods: This study adhered to the Cochrane Collaboration criteria and PRISMA guidelines and was registered on the International Platform of Registered Systematic Review and Meta-Analysis Protocols Database (INPLASY2023120026). We included clinical studies published in English, Spanish, or French that focused on adult patients undergoing segmental mandibulectomy followed by DBFF reconstruction and dental rehabilitation. Data sources included Medline/PubMed, the Cochrane Library, EMBASE, Scopus, and manual searches. Two reviewers independently screened and selected studies, with discrepancies resolved by a third reviewer. Data extraction captured variables such as publication year, patient demographics, number of implants, follow-up duration, flap survival, implant failure, and aesthetic outcomes. The risk of bias was assessed using the JBI appraisal tool, and the certainty of evidence was evaluated using the GRADE approach. Results: A total of 17 clinical studies were included, evaluating 245 patients and 402 dental implants. The average patient age was 43.7 years, with a mean follow-up period of 34.3 months. Flap survival was high, with a 98.3% success rate and only four flap losses. The implant failure rate was low at 1.74%. Esthetic outcomes were varied, with only three studies using standardized protocols for evaluation. The overall certainty of evidence for flap survival was moderate, low for implant failure, and very low for aesthetics due to the subjective nature of assessments and variability in reporting. Conclusions: The primary limitations of the evidence included in this review are the observational design of the studies, leading to an inherent risk of bias, inconsistency in reporting methods, and imprecision in outcome measures. Additionally, the subjective nature of aesthetic evaluations and the variability in assessment tools further limit the reliability of the findings. The DBFF technique demonstrates excellent outcomes for mandibular reconstruction, with high flap survival and low implant failure rates, making it a viable option for dental rehabilitation. However, the evidence for aesthetic outcomes is less certain, highlighting the need for more rigorous and standardized research. This review supports the DBFF as a good alternative for mandibular reconstruction with successful dental implant integration, although further studies are needed to enhance the reliability of aesthetic evaluations.

Evaluation of the Dimensional Accuracy of Robot-Guided Laser Osteotomy in Reconstruction with Patient-Specific Implants-An Accuracy Study of Digital High-Tech Procedures.

Background/Objective: With the rapid advancement in surgical technologies, new workflows for mandibular reconstruction are constantly being evaluated. Cutting guides are extensively employed for defining osteotomy planes but are prone to errors during fabrication and positioning. A virtually defined osteotomy plane and drilling holes in robotic surgery minimize potential sources of error and yield highly accurate outcomes. Methods: Ten mandibular replicas were evaluated after cutting-guided saw osteotomy and robot-guided laser osteotomy following reconstruction with patient-specific implants. The descriptive data analysis summarizes the mean, standard deviation (SD), median, minimum, maximum, and root mean square (RMS) values of the surface comparison for 3D printed models regarding trueness and precision. Results: The saw group had a median trueness RMS value of 2.0 mm (SD ± 1.7) and a precision of 1.6 mm (SD ± 1.4). The laser group had a median trueness RMS value of 1.2 mm (SD ± 1.1) and an equal precision of 1.6 mm (SD ± 1.4). These results indicate that robot-guided laser osteotomies have a comparable accuracy to cutting-guided saw osteotomies, even though there was a lack of statistical significance. Conclusions: Despite the limited sample size, this digital high-tech procedure has been shown to be potentially equivalent to the conventional osteotomy method. Robotic surgery and laser osteotomy offers enormous advantages, as they enable the seamless integration of precise virtual preoperative planning and exact execution in the human body, eliminating the need for surgical guides in the future.

The Chimeric LFC and DCIA Flap in Combined Mandibular and Condylar Head and Neck Reconstruction-A Case Series.

Background: Defects of the ascending ramus of the mandible, including the condylar head and neck or the whole temporomandibular joint (TMJ), are difficult to reconstruct. Reconstruction is mainly based on the use of alloplastic joint prosthesis, costochondral grafting, distraction osteogenesis of the dorsal part of the mandibular ramus, or osseous microvascular flaps of various origin. With the objective of developing a method that overcomes the restrictions of these methods, we recently introduced a sequential chimeric flap consisting of a lateral femoral condyle flap (LFC) and deep circumflex iliac artery flap (DCIA) for reconstruction of up to half of the mandible and the condylar head and neck. Methods: The chimeric flap was used in four patients with the following diagnoses: therapy-refractory osteomyelitis, extended recurrent odontogenic keratozyst, Goldenhar syndrome, and adenocarcinoma of the parotid gland. After a diagnostic workup, LFC and DCIA flaps were harvested in all patients and used in a sequential chimeric design for the reconstruction of the mandibular body and condylar head and neck. Results: Follow-up from at least 24 months up to 70 month after surgery showed a successful reconstruction in all four patients. The LFC provided a cartilaginous joint surface, allowing for a satisfactory masticatory function with a stable occlusion and unrestricted mouth opening and preserved or regained lateral and medial excursions in all patients. The DCIA allowed for a bony reconstruction anatomically resembling a non-atrophied mandibular body. No flap-related complications were observed. Conclusions: The sequential chimeric LFC and DCIA flap is an appropriate method for reconstructing up to half of the mandible and the condylar head and neck. It is suitable in cases where alloplastic joint replacement cannot be used or where other methods have failed. Due to the necessity of harvesting two flaps, the burden of care is increased, and a careful indication is required. The technique is reserved for maxillofacial surgeons who have already gained significant experience in the field of microsurgery.

Long-term skeletal, cephalometric, and volumetric changes in two Helsinki bimaxillary face transplant patients.

Analysis of skeletal, cephalometric, and volumetric changes and occlusion during long-term follow-up was performed for two patients who underwent bimaxillary facial transplantation (FT). The study material consisted of the follow-up data of two bimaxillary composite FT performed in Helsinki University Hospital, one in 2016 and the other in 2018. Serial three-dimensional computed tomography scans obtained during follow-up (6 years for patient 1, 4 years for patient 2) were analyzed. The position of the maxilla remained stable in both patients. At 4 and 6 years, the changes in the anterior maxilla were ≤1 mm, while the anterior mandible had moved 2.6-4 mm anteriorly and the mandibular midline 0.4-3.7 mm to the left side. Patient 1 underwent re-osteosynthesis 4 months after transplantation due to mandibular non-union. Patient 2 had a sagittal mandibular osteotomy at 15 months after FT due to lateral crossbite and tension created by temporomandibular joint rotation. Thereafter both patients had a stable occlusion. A continuous bone volume reduction in the mandible was noticed in both patients (6% and 9% reduction of the transplanted volume). The volume of the transplanted maxilla decreased during the early postoperative period but increased back to the original transplanted volume during the follow-up.

Biomechanical considerations of semi-anatomic glass fiber-reinforced (GFRC) composite implant for mandibular segmental defects: A technical note.

OBJECTIVES: The aim of this study was to investigate the selected biomechanical properties of semi-anatomic implant plate made of biostable glass fiber-reinforced composite (GFRC) for mandibular reconstruction. Two versions of GFRC plates were tested in vitro loading conditions of a mandible segmental defect model, for determining the level of mechanical stress at the location of fixation screws, and in the body of the plate. METHODS: GFRC of bidirectional S3-glass fiber weaves with dimethacrylate resin matrix were used to fabricate semi-anatomic reconstruction plates of two GFRC laminate thicknesses. Lateral surface of the plate followed the contour of the resected part of the bone, and the medial surface was concave allowing for placement of a microvascular bone flap in the next stages of the research. Plates were fixed with screws to a plastic model of the mandible with a large segmental defect in the premolar-molar region. The mandible-plate system was loaded from incisal and molar locations with loads of 10, 50, and 100 N and stress (microstrain, µÎµ) at the location of fixation screws and the body of the plate was measured by strain gauges. In total the test set-up had four areas for measuring the stress of the plate. RESULTS: No signs of fractures or buckling failures of the plates were found during loading. Strain values at the region of the fixation screws were higher with thick plate, whereas thin plates demonstrated higher strain at the body of the plate. Vertical displacement of the mandible-plate system was proportional to the loading force and was higher with incisal than molar loading locations but no difference was found between thin and thick plates. CONCLUSION: GFRC plates withstood the loading conditions up to 100 N even when loaded incisally. Thick plates concentrated the stress to the ramus mandibulae region of the fixation screws whereas the thin plates showed stress concentration in the angulus mandibulae region of the fixation and the plate itself. In general, thin plates caused a lower magnitude of stress to the fixation screw areas than thick plates, suggesting absorption of the loading energy to the body of the plate.

Evaluation of aesthetic outcomes of mandibular reconstruction using artificial intelligence.

BACKGROUND: Although vascularized bone graft (VBG) transfer is the current standard for mandibular reconstruction, reconstruction with a mandibular reconstruction plate (MRP) and with a soft-tissue flap (STF) alone remain crucial options for patients with poor general conditions. However, objective aesthetic outcome evaluations for these methods are limited. METHODS: In a retrospective analysis of 65 patients (VBG, 33; MRP, 19; and STF, 13), mandibular asymmetry value was calculated for each patient's photograph using facial recognition AI, with a higher value indicating worse asymmetry. RESULTS: The MRP group had a value comparable to the VBG group regardless of mandibular defect types. The STF group had a significantly higher value than the VBG group. CONCLUSIONS: Regarding cosmesis, STF was inferior to VBG, whereas MRP was comparable to VBG, even for anterior defects for which rigid reconstruction is mandatory. However, MRP's risks of plate-related complications limit its use to cases where VBG is contraindicated or with poor prognosis.

Segmental Mandibulectomy and Mandibular Reconstruction with Fibula-Free Flap Using a 3D Template.

INTRODUCTION: The present study evaluates the influence of virtual surgical planning with a preoperative 3D resin model on aesthetic and functional outcomes in patients treated by segmental mandibulectomy and reconstruction with fibula-free flap for oral cancer. METHODS: All consecutive patients who underwent segmental mandibulectomy and mandibular reconstruction with a fibula-free flap using a 3D template at our department from January 2021 to January 2023 were included in the study. "Patients control" were patients treated by reconstruction with a fibula-free flap without using a 3D template. Three-dimensional modeling was performed by converting from preoperative computed tomography to a stereolithography format to obtain the resin 3D models. Qualitative analysis of anatomical and aesthetic results consisted of the evaluation of the patients' aesthetic and functional satisfaction and the symmetry of the mandibular contour observed at clinical examination. Quantitative analysis was based on the assessment of the accuracy and precision of the reconstruction by comparing preoperative and postoperative computed tomograms as objective indicators. RESULTS: Seven patients (five males and two females, mean age of 65.1 years) were included in the study. All patients showed a symmetric mandibular contour based on the clinical examination. After recovery, six patients (85.7%) considered themselves aesthetically satisfied. The quantitative analysis (assessed in six/seven patients) showed that the mean difference between preoperative and postoperative intercondylar distance, intergonial angle distance, anteroposterior dimension, and gonial angle improved in the 3D template-assisted group. CONCLUSION: The 3D-printed template for mandibular reconstruction with microvascular fibula-free flap can improve aesthetic outcomes in comparison with standard approaches.

Salvage of Intraoral Dehiscence With a Superficial Temporal Artery Islandized Flap (STAIF).

Intraoral dehiscence compromises free fibula flaps following mandibular reconstruction. Salivary contamination risks thrombosis of microvascular anastomosis and hardware infection. The superficial temporal artery islandized flap (STAIF) provides a non-microsurgical reconstructive option for regaining intraoral competency for a time-sensitive complication. The STAIF is based on the superficial temporal artery coursing along the anterior hairline. The flap is mapped with the assistance of the Doppler probe. The width of the skin paddle is dependent upon the ability to close the donor site. The flap is taken down to the level of the zygomatic arch and tunneled into the mouth. We present a case of a patient who underwent mandibular reconstruction with a free fibula flap after a traumatic shotgun wound. The patient developed repeated intraoral dehiscence following failed local buccal and floor of mouth flaps leading to salivary contamination of the flap and hardware. The intraoral dehiscence was successfully salvaged on the third attempt with a STAIF. Intraoral dehiscence requires urgent attention to prevent loss of the free fibula flap after mandibular reconstruction. The STAIF is a non-microsurgical option for restoring intraoral competency. This robust, axially vascularized skin paddle may be split for intra- and extraoral coverage, as was performed in this case, and is an essential tool in the reconstructive armamentarium.

Early and Late Complications of Mandibulectomy Free Flap Reconstruction: Does the Selective Use of Soft Tissue Only Flaps Reduce Complications?

PURPOSE: This study aims to evaluate the factors most associated with early and late complications following microvascular free tissue transfer (MVFTT) after mandibulectomy. METHODS: A retrospective review of patients undergoing MVFTT after segmental mandibulectomy from September 2016 to February 2021 was performed across a single academic institution. Surgical variables were collected, including the location of the resultant mandibular defect (anterior vs posterior) and flap type (osseous or non-osseous). The primary outcome variables included postoperative complications (early, <90 days; and late, >90 days) and the patients' functional status (return to oral intake). Descriptive statistics, chi-square test, Fischer's exact test, and 2-sample t tests were used to analyze differences among variables. RESULTS: We analyzed a cohort of 114 consecutive patients with mandibular defects, comprising 57 anterior and 57 posterior defects. Bony free flaps with hardware were used to reconstruct 98% of anterior defects compared to 58% of posterior defects (P < .001). All soft tissue only flaps did not utilize any hardware during the reconstruction. Anterior defects demonstrated more late complications requiring additional surgery (30% vs 9%, P = .04). A secondary analysis of posterior mandibular reconstructions compared soft tissue only flaps and bony free flaps with hardware and showed equivalent rates of early (12% vs 13%, P > .99) and late (9% vs 8%, P > .99) complications requiring additional surgery while demonstrating a similar return to full oral competence (55% vs 46%, P = .52) and recovery of a 100% oral diet (67% vs 54%, P = .53). CONCLUSION: Osseous free tissue transfer for segmental mandibular defects remains the gold standard in reconstruction. In our patient cohort, anterior mandibular defects are associated with greater late (>90 day) complications requiring additional surgery. Comparable outcomes may be achieved with soft tissue only versus osseous free flap reconstruction of posterior mandibular defects.

Three-dimensional assessment of upper airway changes associated with mandibular positional deviations following fibula free flap reconstruction.

OBJECTIVES: Fibula free flaps (FFF) are the standard approach to mandibular reconstruction after partial resection, with the goal of restoring aesthetics and masticatory function. The graft position affects both and must be carefully selected. Correlations between sagittal positioning and upper airway anatomy are known from orthognathic surgery. This study aims to evaluate changes in mandibular position and upper airway anatomy after reconstructive surgery with FFF and corresponding correlations. MATERIALS AND METHODS: Mandibular position after reconstruction was evaluated using three-dimensional datasets of pre- and postoperative computed tomography scans of patients treated between 2020 and 2022. Three-dimensional measurements were performed on both condyles and the symphyseal region. Changes in upper airway volume and minimum cross-sectional area (minCSA) were analysed. Intra-rater reliability was assessed. Correlations between changes in upper airway anatomy and sagittal mandibular position were tested. RESULTS: The analysis included 35 patients. Intra-rater reliability was good to excellent. Condylar deviations and rotations were mostly rated as small. Changes in symphyseal position were considerably greater. Median airway volume decreased in the oropharynx and hypopharynx. Posterior deviation of the symphysis was associated with a decreasing minCSA in the hypopharynx and vice versa. CONCLUSIONS: The overall accuracy of mandibular reconstructions with FFF is high, but there is room for optimization. The focus of research should be extended from masticatory to respiratory rehabilitation. CLINICAL RELEVANCE: Effects on respiratory function should be considered prior to graft positioning. The clinical relevance of upper airway changes within the complex rehabilitation of reconstructive surgery patients needs to be further investigated.

Vascularized fascial flap for reconstruction of combined oral mucosa-mandibular defects: The multi-modal biological assessment.

OBJECTIVE: The reconstruction of composite defects in the oral and maxillofacial region using vascularized fascial flaps, such as the fibular, iliac, and temporal fascial flaps, has gained increasing attention among surgeons. However, there remains uncertainty regarding the suitability of fascial flaps as transplants, as well as their healing processes and outcomes, due to their non-mucosal nature. This study aims to comprehensively assess the biological aspects of vascularized fascial flaps at clinical, histological, and genetic levels, with the goal of providing essential biological references for their clinical application. STUDY DESIGN: This study enrolled three patients who underwent reconstruction of combined oral mucosa-mandibular defects using fibular vascularized fascial flaps between 2020 and 2023. Data regarding changes in the appearance of the fascial flaps, bulk-RNA sequencing, and histological slices of initial fascia, initial gingiva, and transformed fascia were collected and analyzed. RESULTS: Within three months, the fascial flaps exhibited rapid epithelial coverage and displayed distinct characteristics resembling mucosa. High-throughput RNA sequencing analyses and histological slices revealed that the transformed fascia exhibited tissue structures similar to mucosa and demonstrated unique advantages in promoting blood vessel formation and reducing scarring through the high-level expression of relevant genes. CONCLUSION: These findings emphasize the potential and feasibility of utilizing vascularized fascial flaps for oral mucosa reconstruction, establishing their unique advantage as transplant materials, and providing significant biological information and references for their selection and clinical application.

To what extent can mastication functionality be restored following mandibular reconstruction surgery? A computer modeling approach.

STATEMENT OF PROBLEM: Advanced cases of head and neck cancer involving the mandible often require surgical removal of diseased sections and subsequent replacement with donor bone. During the procedure, the surgeon must make decisions regarding which bones or tissues to resect. This requires balancing tradeoffs related to issues such as surgical access and post-operative function; however, the latter is often difficult to predict, especially given that long-term functionality also depends on the impact of post-operative rehabilitation programs. PURPOSE: To assist in surgical decision-making, we present an approach for estimating the effects of reconstruction on key aspects of post-operative mandible function. MATERIAL AND METHODS: We develop dynamic biomechanical models of the reconstructed mandible considering different defect types and validate them using literature data. We use these models to estimate the degree of functionality that might be achieved following post-operative rehabilitation. RESULTS: We find significant potential for restoring mandibular functionality, even in cases involving large defects. This entails an average trajectory error below 2 mm, bite force comparable to a healthy individual, improved condyle mobility, and a muscle activation change capped at a maximum of 20%. CONCLUSION: These results suggest significant potential for adaptability in the masticatory system and improved post-operative rehabilitation, leading to greater restoration of jaw function.

Oral rehabilitation and associated quality of life following mandibular reconstruction with free fibula flap: a cross-sectional study.

Introduction: Mandibular reconstruction with the free fibula flap (FFF) has become a standardized procedure. The situation is different with oral rehabilitation, so the purpose of this study was to investigate the frequency of implant placement and prosthetic restoration. Additionally, the patients' situation, motivation, and treatment course were structurally assessed. Materials and methods: All cases between January 2013 and December 2018 that underwent mandibular reconstruction in our department with a free fibula flap and gave written informed consent to participate were interviewed with two structured questionnaires about their restoration and quality of life. Additionally, medical records, general information, status of implants and therapy, and metric analyses of the inserted implants were performed. Results: In total 59 patients were enrolled and analyzed in this monocentric study. Overall, oral rehabilitation was achieved in 23.7% at the time of investigation. In detail, implants were inserted in 37.3% of patients and showed an 83.3% survival of dental implants. Of these implanted patients, dental implants were successfully restored with a prosthetic restoration in 63.6. Within this subgroup, satisfaction with the postoperative aesthetic and functional result was 79.9% and with the oral rehabilitation process was 68.2%. Satisfaction with the implant-borne prosthesis was 87.5%, with non-oral-squamous-cell-carcinoma patients being statistically significantly more content with the handling (p=0.046) and care (p=0.031) of the prosthesis. Discussion: Despite the well-reconstructed bony structures, there is a need to increase the effort of achieving oral rehabilitation, especially looking at the patient's persistent motivation for the procedure.

Sociodemographic and Healthcare System Barriers to PAP Alternatives for Adult OSA: A Scoping Review.

OBJECTIVE: To investigate sociodemographic and healthcare system barriers to access and utilization of alternative treatments to positive airway pressure (PAP) in the management of adult obstructive sleep apnea (OSA). DATA SOURCES: PubMed, Embase, and Web of Science databases were searched from 2003 to 2023 for English-language studies containing original data on sociodemographic and healthcare system barriers to PAP-alternative treatments for adult OSA. REVIEW METHODS: Studies were assessed using the Preferred Reporting Items for Systematic Reviews and Meta-analyses Extension for Scoping Reviews (PRISMA-ScR) guidelines. Title and abstract screening, full-text review, and data collection were conducted by two investigators independently. RESULTS: Out of 1,615 studies screened, 13 studies met inclusion criteria and reported on a total of 1,206,115 patients who received PAP alternative treatments, including surgery (n = 9 studies), and oral appliances (OAs) (n = 3 studies). The chance of receiving a PAP-alternative treatment such as surgery was greater among patients aged 39 years or younger, had body mass index below 30 kg/m2, fewer comorbidities, private insurance, and a higher occupational and income status. The decision of individuals to receive PAP alternative treatments was influenced by increased patient education from providers, as well as improvements in daytime sleepiness and partner perception of snoring and apnea. CONCLUSION: Cumulative evidence suggests that several sociodemographic and healthcare system factors are associated with decreased use of PAP alternatives when PAP therapy fails. Investigation of interventions to eliminate these potential barriers may improve access and treatment outcomes. Laryngoscope, 2024.