Primary stability of different implant macrodesigns in a sinus floor elevation simulated model: an ex vivo study.

BACKGROUND: A novel type of implant (Straumann® BLX implant) has been developed for certain stability from the mechanical and biological aspects and is expected for the implant placement in atrophic maxilla with sinus floor elevation (SFE). PURPOSE: The aim of this study was to evaluate the primary stability in the implants with different macrodesigns in an SFE simulated model. Primary stabilities defined as maximum insertion torque (MIT) and implant stability quotient (ISQ) were compared between this novel type of implant and other types. MATERIALS AND METHODS: Five types of Straumann® 10 mm length implants (Standard Plus; SP, Tapered Effect; TE, Bone Level; BL, Bone Level Tapered; BLT and BLX) and two types of Straumann® 6 mm length implants (SP short, BLX short) were used in this study. Each implant was inserted through 5 mm-thick porcine iliac crest blocks (an SFE simulated model). Primary stability was evaluated by using MIT and ISQ. RESULTS: The mean value of MIT for BLX group showed significantly higher values than SP, BL (p < 0.01), and TE (p < 0.05) groups. The mean value of ISQ for BLX group was significantly higher than the other groups (p < 0.01). The mean value of MIT and ISQ for BLX and BLX short group were significantly higher than those for SP and SP short group (p < 0.01). CONCLUSIONS: In an SFE simulated ex vivo model, BLX group showed the highest values. These results suggest that implant selection can play a crucial role in the achievement of primary stability during SFE and simultaneous implant placement.

Comparative Evaluation of Primary Stability of Two Different Types of Orthodontic Mini-Implants.

BACKGROUND: The mini-implants introduced new possibilities of adequate anchorage in orthodontics. Furthermore, due to its small size, it can even be placed at relatively difficult sites with ease. Removal torque should be high to prevent implant unscrewing. OBJECTIVE: This prospective clinical trial was aimed to evaluate the insertion torque and removal torque of single-threaded and double-threaded cylindrical orthodontic mini-implants. MATERIALS AND METHODS: A total of 36 cases were randomly divided into two groups, with an equal number of patients in each group (n = 18). In Group 1 single-threaded cylindrical mini-implant was placed, and in the other group, cylindrical implants with double-threaded were placed. Maximum insertion torque (MIT) and maximum removal torques (MRTs) were recorded for both groups. Data collected were subjected to statistical analysis. RESULTS: MIT was found to be significantly higher than MRT for both the groups and between the groups. Intergroup comparison in the present study showed significantly higher values for MIT than MRT. Intergroup comparison of MIT showed more values for Group 2 as compared to Group 1. Similar statistically significant values were seen in terms with MRT, where double-threaded cylindrical mini-implants had more torque value than the other group. CONCLUSIONS: Orthodontic mini screws represent effective temporary anchorage devices. Double-threaded cylindrical mini-implants have significantly higher insertion and removal torque than single-threaded mini-implants and hence better stability.

Tapered Implants in Dentistry: Revitalizing Concepts with Technology: A Review.

The most common approach to lessen treatment times is by decreasing the healing period during which osseointegration is established. Implant design parameters such as implant surface, primary stability, thread configuration, body shape, and the type of bone have to be considered to obtain this objective. The relationship that exists between these components will define the initial stability of the implant. It is believed implant sites using a tapered design and surface modification can increase the primary stability in low-density bone. Furthermore, recent experimental preclinical work has shown the possibility of attaining primary stability of immediately loaded, tapered dental implants without compromising healing and rapid bone formation while minimizing the implant stability loss at compression sites. This may be of singular importance with immediate/early functional loading of single implants placed in poor-quality bone. The selection of an implant that will provide adequate stability in bone of poor quality is important. A tapered-screw implant design will provide adequate stability because it creates pressure on cortical bone in areas of reduced bone quality. Building on the success of traditional tapered implant therapy, newer tapered implant designs should aim to maximize the clinical outcome by implementing new technologies with adapted clinical workflows.

Primary Stability of a Hybrid Implant Compared with Tapered and Cylindrical Implants in an Ex Vivo Model.

BACKGROUND: Hybrid implants are thought to offer good stability and bone-implant contact. PURPOSE: This study sought to evaluate the primary stability of a hybrid implant compared with tapered and cylindrical implants in an ex vivo model and compare undersized drilling with standard drilling in attaining primary stability. MATERIALS AND METHODS: Hybrid (Straumann® Bone Level; BL), tapered (Straumann® Tapered Effect; TE), and cylindrical (Straumann® Standard Plus; SP) implants were inserted into 15 mm-thick porcine iliac crest blocks using standard (corticocancellous or cancellous bone) or undersized (cancellous bone only) drilling (n = 7). Stability was evaluated using maximum insertion torque (MIT), implant stability quotient (ISQ), and push-out tests. RESULTS: The mean MIT for BL and TE was significantly higher than that for SP (p < 0.05). With standard drilling in corticocancellous bone, the mean ISQ for TE was significantly higher than that for SP (p < .05). The mean MIT, ISQ, and push-out test scores for BL, TE, and SP with standard drilling in corticocancellous bone were significantly higher than those with undersized or standard drilling in cancellous bone (p < .05). CONCLUSIONS: In this ex vivo model, the hybrid implant demonstrated promising primary stability compared with the cylindrical implant. The improved stability of the hybrid implant was especially evident in cancellous bone. The influence of the cortical layer should be recognized when selecting implants for primary stability.

Effect of cutting flute length and shape on insertion and removal torque of orthodontic mini-implants / 대한치과교정학회지

OBJECTIVE: The purpose of this study was to evaluate the effect of length and shape of cutting flute on mechanical properties of orthodontic mini-implants. METHODS: Three types of mini-implants with different flute patterns (Type A with 2.6 mm long flute, Type B with 3.9 mm long and straight flute, Type C with 3.9 mm long and helical flute) were inserted into the biomechanical test blocks (Sawbones Inc., USA) with 2 mm and 4 mm cortical bone thicknesses to test insertion and removal torque. RESULTS: In 4 mm cortical bone thickness, Type C mini-implants showed highest maximum insertion torque, then Type A and Type B in order. Type C also showed shortest total insertion time and highest maximum removal torque, but Type A and B didn't showed statistically significant difference in insertion time and removal torque. In 2 mm cortical bone thickness, there were no significant difference in total insertion time and maximum removal torque in three types of mini-implants, but maximum insertion torque of Type A was higher than two other Types of mini-implants. CONCLUSIONS: Consideration about length and shape of cutting flute of mini-implant is also required when the placement site has thick cortical bone.

Evaluation of insertion of torque and pull-out strength of mini-screws according to different thickness of artificial cortical bone / 대한치과교정학회지

OBJECTIVE: The purpose of this study was to evaluate the mechanical performance of mini-screws during insertion into artificial bone with use of the driving torque tester (Biomaterials Korea, Seoul, Korea), as well as testing of Pull-out Strength (POS). METHODS: Experimental bone blocks with different cortical bone thickness were used as specimens. Three modules of commercially available drill-free type mini-screws (Type A; pure cylindrical type, Biomaterials Korea, Seoul, Korea, Type B; partially cylindrical type, Jeil Medical, Seoul, Korea, Type C; combination type of cylindrical and tapered portions, Ortholution, Seoul, Korea), were used. RESULTS: Difference in the cortical bone thickness had little effect on the maximum insertion torque (MIT) in Type A mini-screws. But in Type B and C, MIT increased as the cortical bone thickness increased. MIT of Type C was highest in all situations, then Type B and Type A in order. Type C showed lower POS than Type A or B in all situations. There were statistically significant correlations between cortical bone thickness and MIT, and POS for each type of the mini-screws. CONCLUSION: Since different screw designs showed different insertion torques with increases in cortical bone thickness, the best suitable screw design should be selected according to the different cortical thicknesses at the implant sites