Methane biohydroxylation into methanol by Methylosinus trichosporium OB3b: possible limitations and formate use during reaction.

Methane (CH4) hydroxylation into methanol (MeOH) by methanotrophic bacteria is an attractive and sustainable approach to producing MeOH. The model strain Methylosinus trichosporium OB3b has been reported to be an efficient hydroxylating biocatalyst. Previous works have shown that regardless of the bioreactor design or operation mode, MeOH concentration reaches a threshold after a few hours, but there are no investigations into the reasons behind this phenomenon. The present work entails monitoring both MeOH and formate concentrations during CH4 hydroxylation, where neither a gaseous substrate nor nutrient shortage was evidenced. Under the assayed reaction conditions, bacterial stress was shown to occur, but methanol was not responsible for this. Formate addition was necessary to start MeOH production. Nuclear magnetic resonance analyses with 13C-formate proved that the formate was instrumental in regenerating NADH; formate was exhausted during the reaction, but increased quantities of formate were unable to prevent MeOH production stop. The formate mass balance showed that the formate-to-methanol yield was around 50%, suggesting a cell regulation phenomenon. Hence, this study presents the possible physiological causes that need to be investigated further. Finally, to the best of our knowledge, this study shows that the reaction can be achieved in the native bacterial culture (i.e., culture medium containing added methanol dehydrogenase inhibitors) by avoiding the centrifugation steps while limiting the hands-on time and water consumption.

Low-carbon and overproduction of cordycepin from methanol using engineered Pichia pastoris cell factory.

Cordycepin, a nucleoside analog, is widely used in medicine and health products. However, the production of cordycepin from Cordyceps militaris faces the challenges of low productivity and high rate of greenhouse gas emissions. In this study, by optimizing the cordycepin biosynthesis pathway through promoter combination, Kozak sequence, and enzyme fusion, enhancing the methanol assimilation capacity in peroxisomes, adjusting the synthesis of NADPH and ATP, and combining the enhanced supply of adenosine and 3'-AMP, the cordycepin high-yield strain Pp29 was constructed, which produced 1551.44 mg/L cordycepin by shake-flask fermentation. In fed-batch fermentation, Pp29 achieved the highest yield (8.11 g/L, 67.64 mg/g DCW, and 1.35 g/L/d) to date in 10 L fermenter, and the CO2-eq emissions were 1.9-17.3 times lower than C. militaris and other yeast systems. This study provide basis for Pichia pastoris to be used as chassis cell for synthesizing cordycepin and other nucleoside analogs by methanol as carbon source.

Designing TiO2 Nanotubular Arrays with Au-CoOx Core-Shell Nanoparticles for Enhanced Photoelectrochemical Methanol and Lignin Oxidation.

One-dimensional (1D) ordered TiO2 nanotubes exhibit exceptional charge transfer capabilities, making them suitable candidates for constructing visible-light-active photoanodes in selective PEC oxidation reactions. Herein, we employed a facile and easily scalable electrochemical method to fabricate Au-CoOx-deposited ordered TiO2 nanotubular array photoanodes. The improved visible light absorption capacity of TiO2-Au-CoOx, with unhampered 1D channels and the controlled integration of Au between TiO2 and CoOx, along with their synergistic interaction, have been identified as the most promising strategy for enhanced PEC performance, as evidenced by an IPCE of 3.7% at 450 nm. Furthermore, the robust interfacial charge transfer pathway from CoOx to the TiO2 surface via the Au mediator promotes the migration of photogenerated electrons and enables the accumulation of holes on the surface of CoOx. These holes are then efficiently utilized by oxidants such as methanol or lignin to generate value-added products, highlighting the potential of this system for advanced PEC applications.

Dynamically Regulating Homologous Recombination Enables Precise Genome Editing in Ogataea polymorpha.

Methylotrophic yeast Ogataea polymorpha has become a promising cell factory due to its efficient utilization of methanol to produce high value-added chemicals. However, the low homologous recombination (HR) efficiency in O. polymorpha greatly hinders extensive metabolic engineering for industrial applications. Overexpression of HR-related genes successfully improved HR efficiency, which however brought cellular stress and reduced chemical production due to constitutive expression of the HR-related gene. Here, we engineered an HR repair pathway using the dynamically regulated gene ScRAD51 under the control of the l-rhamnose-induced promoter PLRA3 based on the previously constructed CRISPR-Cas9 system in O. polymorpha. Under the optimal inducible conditions, the appropriate expression level of ScRAD51 achieved up to 60% of HR rates without any detectable influence on cell growth in methanol, which was 10-fold higher than that of the wild-type strain. While adopting as the chassis strain for bioproductions, the dynamically regulated recombination system had 50% higher titers of fatty alcohols than that static regulation system. Therefore, this study provided a feasible platform in O. polymorpha for convenient genetic manipulation without perturbing cellular fitness.

Can Metal Promotion of SAPO-34 Genuinely Improve its Catalytic Performance in Methanol Conversion to Light Olefins Reaction?

To genuinely assess the effect of secondary metal promotion on improving the SAPO-34 catalytic performance in MTO reaction, a broad spectrum of metals from different groups of the periodic table (alkali and alkaline earth metals, transition metals, rare earth metals, and basic metals) were investigated. Metals were added through a direct incorporation route with Me/Al2O3 molar ratio of 0.05. Some metals seamlessly incorporated into the SAPO-34 framework and replaced the Si and Al atoms, while others partially merged or even failed to be combined with SAPO and emerged as amorphous phases. Although, in some cases, the surface area of the metal-promoted samples increased due to enhanced nucleation rate and smaller particle formation, the majority of the promoted samples suffered from a severe loss in crystallinity that resulted in inferior catalytic performance. It was also illustrated that hydrogen co-feeding with methanol (H2/MeOH molar ratio of 1.5) at ambient pressure could extend the catalyst lifetime by 27% due to hydrogenation and cracking of the coke species and improve the light olefins selectivity.

Antidotes for poisoning by alcohols that form toxic metabolites.

The alcohols methanol, ethylene glycol and diethylene glycol share many characteristics. The most important is that the compounds themselves are relatively nontoxic but are metabolized, initially by alcohol dehydrogenase, to various toxic intermediates. These compounds are readily available worldwide in commercial products as well as in homemade alcoholic beverages, both of which lead to most of the poisonings, from either unintentional or intentional ingestion. Although relatively infrequent, toxic alcohol poisonings do unfortunately occur in outbreaks and can result in severe morbidity and mortality. These poisonings have traditionally been treated with ethanol since it competes for the active site of alcohol dehydrogenase and decreases the formation of toxic metabolites. Although ethanol can be an effective antidote, there are substantial practical problems with its use. Therefore fomepizole, a potent competitive inhibitor of alcohol dehydrogenase, was developed for a hopefully better treatment for metabolically toxic alcohol poisonings. Fomepizole has few side effects and is easy to use in practice and it may obviate the need for haemodialysis in some, but not all, patients. Hence, fomepizole has largely replaced ethanol as the toxic alcohol antidote in many countries. Nevertheless, ethanol remains an important alternative because access to fomepizole can be limited, the cost may appear excessive or the physician may prefer ethanol due to experience.

Stable Cu/Cu2O/CuN3@NC Catalysts for Aqueous Phase Reforming of Methanol.

Aqueous-phase reforming of methanol represents a promising avenue for hydrogen (H2) production. However, developing highly efficient and low-cost nonprecious catalysts remains challenging. Here, we report the synthesis of Cu-based catalysts with Cu, Cu2O, and CuN3 nanoparticles anchored on the nitrogen-doped carbon, forming Cu0/Cu+/Cu-N3 active sites. This catalyst achieves a H2 production rate of 140.1 µmol/gcat/s at 210 °C, which is several times to 2 orders of magnitude higher than that of Cu-, Ni-, even Pt-based catalysts, demonstrating excellent long-term stability over 350 h at 210 °C. A mechanism investigation reveals that the Cu-N3 site facilitates water dissociation into *OH and improves *CO and *OH conversion, leading to enhanced CO conversion and H2 production kinetics.

Precision Methanol Sensing: Integrating Chemical Insights of Optical Sensors for Enhanced Detection.

Methanol has become a very important part of many industries, ranging from chemical production and pharmaceuticals to automotive and electronics manufacturing as a result of which methanol usage has spiked in recent years. But this exponential increase asks for precise detection methods as methanol has not only detrimental effects on environment but it is very dangerous to human health even if consumed in a minute amount .This paper will explore the unique physical and chemical properties of methanol which can be exploited to make it a target for different mechanisms such as H-Bonding, induced self-assembly, Internal Charge Transfer (ICT), Aggregation-induced emission (AIE), conformational flexibility, keto-enol tautomerization, adsorption etc. by various small molecule and nano-particles. Informative studies on small molecules involves functionalized pentacenequinone derivatives, luminogens, ligands and fluorescent probes which can be used to detect methanol by change in color or intensity which can be easily detected in real time and is portable. On the other hand, nanoparticle-based probes reveal the use of materials like chitosan/zinc, sulfide composites, Quantum Dots (QDs) hybrids, graphene polyoxides, Ag-LaFeO3 etc. which provides with selective and sensitive methanol optical and conductometric sensing. This paper acknowledges the contributions of various studies and researchers who contributed to advancing the field of methanol sensing, providing a foundation for future developments.

Generation of citric acid-hyperproducers independent of methanol effect by high-level expression of cexA encoding citrate exporter in Aspergillus tubingensis.

Methanol reportedly stimulates citric acid (CA) production by Aspergillus niger and A. tubingensis; however, the underlying mechanisms remain unclear. Here, we elucidated the molecular functions of the citrate exporter gene cexA in relation to CA production by Aspergillus tubingensis WU-2223L. Methanol addition to the medium containing glucose as a carbon source markedly increased CA production by strain WU-2223L by 3.38-fold, resulting in a maximum yield of 65.5 g/L, with enhanced cexA expression. Conversely, the cexA-complementing strain with the constitutive expression promoter Ptef1 (strain LhC-1) produced 68.3 or 66.7 g/L of CA when cultivated without or with methanol, respectively. Additionally, strain LhC-2 harboring two copies of the cexA expression cassette produced 80.7 g/L of CA without methanol addition. Overall, we showed that cexA is a target gene for methanol in CA hyperproduction by A. tubingensis WU-2223L. Based on these findings, methanol-independent CA-hyperproducing strains, LhC-1 and LhC-2, were successfully generated.

Tetracationic Cobalt 3,4-pyridinoporphyrazine for Direct CO2 to Methanol Conversion Escaping the CO Intermediate Pathway.

Molecular catalysts offer a unique opportunity to implement different chemical functionalities to steer the efficiency and selectivity for the CO2 reduction for instance. Metalloporphyrins and metallophthalocyanines are under high scrutiny since their most classic derivatives the tetraphenylporphyrin (TPP) and parent phthalocyanine (Pc), have been used as the molecular platform to install, hydrogen bonds donnors, proton relays, cationic fragments, incorporation in MOFs and COFs, to enhance the catalytic power of these catalysts. Herein, we examine the electrocatalytic properties of the tetramethyl cobalt (II) tetrapyridinoporphyrazine (CoTmTPyPz) for the reduction of CO2 in heterogeneous medium when adsorbed on carbon nanotubes (CNT) at a carbon paper (CP) electrode. Unlike reported electrocatalysis with cobalt based phthalocyanine where CO was advocated as the two electron and two protons reduced intermediate on the way to the formation of methanol, we found here that CoTmTPyPz does not reduce CO to methanol. Henceforth, ruling out a mechanistic pathway where CO is a reaction intermediate.

Electron-Efficient Co-electrosynthesis of Formates from CO2 and Methanol Feedstocks.

The electrochemical conversion of CO2 into valuable chemicals using renewable electricity shows significant promise for achieving carbon neutrality and providing alternative energy storage solutions. However, its practical application still faces significant challenges, including high energy consumption, poor selectivity, and limited stability. Here, we propose a hybrid acid/alkali electrolyzer that couples the acidic CO2 reduction reaction (CO2RR) at the cathode with alkaline methanol oxidation reaction (MOR) at the anode. This dual electro-synthesis cell is implemented by developing Bi nanosheets as cathode catalysts and oxide-decorated Cu2Se nanoflowers as anode catalysts, enabling high-efficiency electron utilization for formate production with over 180% coulombic efficiency and more than 90% selectivity for both CO2RR and MOR conversion. The hybrid acid/alkali CO2RR-MOR cell also demonstrates long-term stability exceeding 100 hours of continuous operation, delivers a formate partial current density of 130 mA cm-2 at a voltage of only 2.1 V, and significantly reduces electricity consumption compared to the traditional CO2 electrolysis system. This study illuminates an innovative electron-efficiency and energy-saving techniques for CO2 electrolysis, as well as the development of highly efficient electrocatalysts.

Modulating d-Orbital electronic configuration via metal-metal oxide interactions for boosting electrocatalytic methanol oxidation.

Coordinating the interfacial interaction between Pt-based nanoparticles (NPs) and supports is a significant strategy for the modulation of d-orbital electronic configuration and the adsorption behaviors of intermediates, which is of critical importance for boosting electrocatalytic performance. Herein, we demonstrated a specific synergy effect between the ordered PtFe intermetallic and neighboring oxygen vacancies (Ov), which provides an "ensemble reaction pool" to balance the barriers of both the activity, stability, and CO poisoning issues for the methanol oxidation reaction (MOR). In our proposed "ensemble reaction pool", the deprotonation of methanol occurs on the Pt site to form the intermediate *CO, where the strain derived from the PtFe intermetallic could alter the d-orbital electronic configuration of Pt, intrinsically weakening the *CO adsorption energy, and Ov in CeO2 promote hydroxyl species (*OH) adsorption, which will react with *CO, facilitating the dissociative adsorption of *CO, thus cooperatively enhancing the performance of MOR. The X-ray absorption fine structure (XAFS) analyses reveal the electron transfer in CeO2 and then convert Ce4+ to Ce3+. The density functional theory (DFT) calculations revealed that introducing Fe induces strain could modify the d-band center of Pt, and thus lower the energy barrier of the potential-determining step. Meanwhile, the introduction of CeO2 can favor the *OH adsorption, speeding up the oxidation and removal of *CO blocked at the Pt site. Furthermore, the determined atomic arrangement and surface composition of PtFe intermetallic further guarantee the stability of MOR by suppressing less-noble metal into the electrolyte.

Trimetallic Ni-CuCoN0.6 Ohmic junction for the enhanced oxidation of methanol and urea.

Methanol oxidation reaction (MOR) and urea oxidation reaction (UOR) can be utilized as effective alternatives to the anodic oxygen evolution reaction (OER) in overall water-splitting. Nevertheless, the development of cost-effective, highly efficient and durable electrocatalysts for MOR and UOR remains a significant challenge. Herein, the Ohmic junction (Ni-CuCoN0.6@CC) comprising CuCoN0.6 nanosheets and Ni nanoparticles anchored on carbon cloth (CC) was successfully synthesized via a two-step hydrothermal process followed by pyrolysis. The Ni-CuCoN0.6@CC demonstrates exceptional performance in both MOR (1.334 V@10 mA cm-2) and UOR (1.335 V@10 mA cm-2), coupled with outstanding durability, maintaining 88.70 % current density for MOR and 88.92 % for UOR after a rigorous 50-h stability test. Furthermore, the Ni-CuCoN0.6@CC demonstrates a high selectivity for oxidizing methanol to formic acid, achieving Faraday efficiencies exceeding 90 % at various current densities in the context of MOR. The outstanding performance of Ni-CuCoN0.6@CC in terms of MOR and UOR either surpasses or closely approaches the levels reported in previous literature, primarily due to the synergistic effect resulting from the Ohmic junction: in this system, Ni serves as the principal active component, Co augments catalytic activity and diminishes onset potential, while Cu enhances long-term durability. Moreover, CuCoN0.6 nanosheets effectively modulate electronic structure and optimize the morphology of Ni, leading to the exposure of numerous defects that provide a wealth of active sites for the reaction. Additionally, the exceptional hydrophilic and aerophobic surface promotes enhanced mass transfer. Density functional theory (DFT) calculations show that Ni-CuCoN0.6@CC enhances reactant adsorption and product desorption, reducing energy barriers and expediting MOR and UOR kinetics.

Insights into the roles of nitrogen and phosphorus co-doping for efficient methanol electrooxidation.

Anchoring Pt onto multi-heteroatom doped carbon materials has been recognized as an effective approach to improve the performance of electrocatalytic methanol oxidation. However, distinct contributions and specific behavior mechanisms of different heteroatoms, notably N and P, the specific behavior mechanisms in synergistically promoting Pt NPs remain elusive. In this work, we construct 1D N and P co-doped carbon nanotube (N, P-CNTs) supports with abundant defect anchors for Pt. The as-prepared Pt/N, P-CNTs exhibit outstanding activity and exceptional stability in methanol oxidation reaction (MOR), achieving high mass activity up to 6481.3 mA mg-1Pt. Moreover, they can retain 90.5 % of their initial current density even after 800 cycles tests. Detailed characterizations and theoretical calculations indicate that the robust strong metal-support interactions (SMSI) effect caused by N doping within the unique N and P co-doped coordination structure controllably regulate the coordination environment of Pt, reduce the d-band center of Pt, thus promoting the adsorption and decomposition of CH3OH. However, P doping weakens the adsorption strength of CO on the Pt active site by sacrificing partial electron transfer, accelerating the oxidative conversion of the CO-like poisoning species (COads). Significantly, the synergistic mechanism of N and P species on the modification of Pt's electronic structure and its subsequent impact on the electrocatalytic methanol oxidation behaviors on the Pt surface was thoroughly elucidated, providing a constructive route for designing robust MOR electrocatalysts with high MOR activity and durability.

Unlocking the Potential for Methanol Synthesis via Electrochemical CO2 Reduction Using CoPc-Based Molecular Catalysts.

The electrochemical CO2 reduction reaction (CO2RR) to produce methanol (CH3OH) is an attractive yet challenging approach due to a lack of selective electrocatalysts. An immobilized cobalt phthalocyanine (CoPc) molecular catalyst has emerged as a promising electrocatalyst for CH3OH synthesis, demonstrating decent activity and selectivity through a CO2-CO-CH3OH cascade reaction. However, CoPc's performance is limited by its weak binding strength toward the CO intermediate. Recent advancements in molecular modification aimed at enhancing CO intermediate binding have shown great promise in improving CO2-to-CH3OH performance. In this Perspective, we discuss the competitive binding mechanism between CO2 and CO that hinders CH3OH formation and summarize effective molecular modification strategies that can enhance both the binding of the CO intermediate and the conversion of the CO2-to-CH3OH activity. Finally, we offer future perspectives on optimization strategies to inspire further research efforts to fully unlock the potential for methanol synthesis via the CO2RR using molecular catalysts.

Platinum-Ruthenium Bimetallic Nanoparticle Catalysts Synthesized Via Direct Joule Heating for Methanol Fuel Cells.

Platinum-Ruthenium (PtRu) bimetallic nanoparticles are promising catalysts for methanol oxidation reaction (MOR) required by direct methanol fuel cells. However, existing catalyst synthesis methods have difficulty controlling their composition and structures. Here, a direct Joule heating method to yield highly active and stable PtRu catalysts for MOR is shown. The optimized Joule heating condition at 1000 °C over 50 microseconds produces uniform PtRu nanoparticles (6.32 wt.% Pt and 2.97 wt% Ru) with an average size of 2.0 ± 0.5 nanometers supported on carbon black substrates. They have a large electrochemically active surface area (ECSA) of 239 m2 g-1 and a high ECSA normalized specific activity of 0.295 mA cm-2. They demonstrate a peak mass activity of 705.9 mA mgPt -1 for MOR, 2.8 times that of commercial 20 wt.% platinum/carbon catalysts, and much superior to PtRu catalysts obtained by standard hydrothermal synthesis. Theoretical calculation results indicate that the superior catalytic activity can be attributed to modified Pt sites in PtRu nanoparticles, enabling strong methanol adsorption and weak carbon monoxide binding. Further, the PtRu catalyst demonstrates excellent stability in two-electrode methanol fuel cell tests with 85.3% current density retention and minimum Pt surface oxidation after 24 h.

Lanthanide-Induced Ligand Effect to Regulate the Electronic Structure of Platinum-Lanthanide Nanoalloys for Efficient Methanol Oxidation.

The ligand effect in alloy catalysts is one of the decisive parameters of the catalytic performance. However, the strong interrelation between the ligand effect and the geometric effect of the active atom and its neighbors as well as the systematic alteration of the microenvironment of the active site makes the active mechanism unclear. Herein, Pt3Tm, Pt3Yb, and Pt3Lu with a cubic crystal system (Pm-3m) were selected. With the difference of Pt-Pt interatomic distance within 0.02 Å, we minimize the geometric effect to realize the disentanglement of the system. Through precise characterization, due to the low electronegativity of Ln (Ln = Tm, Yb, and Lu) and the ligand effect in the alloy, the electronic structure of Pt is continuously optimized, which improves the electrochemical methanol oxidation reaction (MOR) performance. The Ln electronegativity has a linear relationship with the MOR performance, and Pt3Yb/C achieves a high mass activity of up to 11.61 A mgPt-1, which is the highest value reported so far in Pt-based electrocatalysts. The results obtained in this study provide fundamental insights into the mechanism of ligand effects on the enhancement of electrochemical activity in rare-earth nanoalloys.

Hansenula polymorpha methanol metabolism genes enhance recombinant protein production in Komagataella phaffi.

Recombinant protein production in Komagataella phaffi (K. phaffi), a widely utilized host organism, can be optimized by enhancing the metabolic flux in the central carbon metabolism pathways. The methanol utilization pathway (MUT) during methanol-based growth plays a crucial role in providing precursors and energy for cell growth and development. This study investigated the impact of boosting the methanol dissimilation pathway, a branch of MUT that plays a vital role in detoxifying formaldehyde and providing energy in the form of NADH, in K. phaffi. This was achieved by integrating two orthologous genes from Hansenula polymorpha into the K. phaffi genome: formaldehyde dehydrogenase (HpFLD) and formate dehydrogenase (HpFMDH). The HpFLD and HpFMDH genes were isolated from the Hansenula polymorpha genome and inserted under the regulation of the pAOX1 promoter in the genome of recombinant K. phaffi that already contained a single copy of model protein genes (eGFP or EGII). The expression levels of these model proteins were assessed through protein activity assays and gene expression analysis. The findings revealed that while both orthologous genes positively influenced model protein production, HpFMDH exhibited a more pronounced upregulation in expression compared to HpFLD. Co-expression of both orthologous genes demonstrated synergistic effects, resulting in approximately a twofold increase in the levels of the model proteins detected. This study provides valuable insights into enhancing the production capacity of recombinant proteins in K. phaffi.

Intermolecular Interactions between Aldehydes and Alcohols: Conformational Equilibrium and Rotational Spectra of Acrolein-Methanol Complex.

The rotational spectra of the 1:1 complex formed by acrolein and methanol and its deuterated isotopologues have been analyzed. Two stable conformations in which two hydrogen bonds between the two moieties are formed were detected. The rotational lines show a hyperfine structure due to the methyl group internal rotation in the complex and the V3 barriers hindering the motion were determined as 2.629(5) kJ mol-1 and 2.722(5) kJ mol-1 for the two conformations, respectively. Quantum mechanical calculations at the MP2/aug-cc-pVTZ level and comprehensive analysis of the intermolecular interactions, utilizing NCI and SAPT approaches, highlight the driving forces of the interactions and allow the determination of the binding energies of complex formation.

Enhanced Electrocatalytic Performance of the FePt/PPy-C Composite toward Methanol Oxidation.

A novel FePt/PPy-C composite nanomaterial has been designed and investigated as a methanol oxidation reaction (MOR) electrocatalyst. The FePt nanoparticles with an average diameter of about 3 nm have been prepared by the co-reduction method and then loaded onto the PPy-C composite support. The electrocatalytic performance is affected by the composition of the FePt nanoparticles. The experimental results indicated that the Fe1.5Pt1/PPy-C catalyst exhibited excellent catalytic activity and stability for MOR, with mass activity and specific activity of 1.76 A mgPt-1 and 2.71 mA cm-2, respectively, which are 5.18 and 4.60 times higher than that of the commercial Pt/C catalyst. Density functional theory (DFT) has been employed to simulate the electrical structures of catalyst supports, and the mechanism of the methanol oxidation process has been further analyzed. The heterojunctions of the PPy-C interface could accelerate the electron migration from the electrocatalytic center to the electrodes. The possibility of methanol oxidation has been improved effectively, which can be confirmed by the d-band center and CO adsorption energy on FePt nanoparticles in the DFT calculation results.