Microbe cultivation guidelines to optimize rhamnolipid applications.

In the growing landscape of interest in natural surfactants, selecting the appropriate one for specific applications remains challenging. The extensive, yet often unsystematized, knowledge of microbial surfactants, predominantly represented by rhamnolipids (RLs), typically does not translate beyond the conditions presented in scientific publications. This limitation stems from the numerous variables and their interdependencies that characterize microbial surfactant production. We hypothesized that a computational recipe for biosynthesizing RLs with targeted applicational properties could be developed from existing literature and experimental data. We amassed literature data on RL biosynthesis and micellar solubilization and augmented it with our experimental results on the solubilization of triglycerides (TGs), a topic underrepresented in current literature. Utilizing this data, we constructed mathematical models that can predict RL characteristics and solubilization efficiency, represented as logPRL = f(carbon and nitrogen source, parameters of biosynthesis) and logMSR = f(solubilizate, rhamnolipid (e.g. logPRL), parameters of solubilization), respectively. The models, characterized by robust R2 values of respectively 0.581-0.997 and 0.804, enabled the ranking of descriptors based on their significance and impact-positive or negative-on the predicted values. These models have been translated into ready-to-use calculators, tools designed to streamline the selection process for identifying a biosurfactant optimally suited for intended applications.

Fabrication of Celecoxib PVP Microparticles Stabilized by Gelucire 48/16 via Electrospraying for Enhanced Anti-Inflammatory Action.

Electrospraying (ES) technology is considered an efficient micro/nanoparticle fabrication technique with controlled dimensions and diverse morphology. Gelurice® 48/16 (GLR) has been employed to stabilize the aqueous dispersion of Celecoxib (CXB) for enhancing its solubility and oral bioavailability. Our formula is composed of CXB loaded in polyvinylpyllodine (PVP) stabilized with GLR to formulate microparticles (MPs) (CXB-GLR-PVP MPs). CXB-GLR-PVP MPs display excellent in vitro properties regarding particle size (548 ± 10.23 nm), zeta potential (-20.21 ± 2.45 mV), and drug loading (DL, 1.98 ± 0.059 mg per 10 mg MPs). CXB-GLR-PVP MPs showed a significant (p < 0.05) higher % cumulative release after ten minutes (50.31 ± 4.36) compared to free CXB (10.63 ± 2.89). CXB exhibited good dispersibility, proved by X-ray diffractometry (XRD), adequate compatibility of all components, confirmed by Fourier-Transform Infrared Spectroscopy (FTIR), and spherical geometry as revealed in scanning electron microscopy (SEM). Concerning our anti-inflammatory study, there was a significant decrease in the scores of the inflammatory markers' immunostaining in the CXB-GLR-PVP MPs treated group. Also, the amounts of the oxidative stress biomarkers, as well as mRNA expression of interleukins (IL-1ß and IL-6), considerably declined (p < 0.05) in CXB-GLR-PVP MPs treated group alongside an enhancement in the histological features was revealed. CXB-GLR-PVP MPs is an up-and-coming delivery system that could be elucidated in future clinical investigations.

Development and Evaluation of Polymeric Mixed Micelles Prepared using Hot-Melt Extrusion for Extended Delivery of Poorly Water-Soluble Drugs.

The poor aqueous solubility is a well-recognized restriction for the clinical application of many drug molecules. Micelles delivery system provides a promising strategy for the solubility enhancement of hydrophobic drugs. This study developed and evaluated different polymeric mixed micelles prepared using hot-melt extrusion coupled hydration method to improve the solubility and extend the release of the model drug ibuprofen (IBP). The physicochemical properties of the prepared formulations were characterized in terms of particle size, polydispersity index, zeta potential, surface morphology, crystallinity, encapsulation efficiency, drug content, in vitro drug release, dilution stability, and storage stability. Soluplus®/poloxamer 407, Soluplus®/poloxamer 188, and Soluplus®/TPGS mixed micelles had average particle sizes of 86.2 ± 2.8, 89.6 ± 4.2, and 102.5 ± 3.13 nm, respectively with adequate encapsulation efficiencies of 80% to 92%. Differential scanning calorimetry studies confirmed that the IBP molecules were dissolved in the polymers in an amorphous state. The in vitro release results revealed that the IBP-loaded mixed micelles presented extended-release behavior compared to the free drug. In addition, the developed polymeric mixed micelles remained stable upon dilution and one-month storage. These results demonstrated that the hot-melt extrusion coupling hydration method could be a promising, effective, and environment-friendly manufacturing technique for the scale-up production of polymeric mixed micelles to deliver insoluble drugs.

Mechanism of the Micellar Solubilization of Curcumin by Mixed Surfactants of SDS and Brij35 via NMR Spectroscopy.

The micellar solubilization mechanism of curcumin by mixed surfactants of SDS and Brij35 was investigated at the molecular scale by NMR spectroscopy. Through the investigation of the micelle formation process, types and structures of mixed micelles and solubilization sites, the intrinsic factors influencing the solubilization capacity were revealed. For systems with αSDS = 0.5 and 0.2, the obtained molar solubilization ratios (MSRs) are consistent with the MSRideal values. However, for αSDS = 0.8, the solubilization capacity of curcumin is weakened compared to the MSRideal. Furthermore, only one single mixed SDS/Brij35 micelles are formed for αSDS = 0.5 and 0.2. However, for αSDS = 0.8, there are separate SDS-rich and Brij35-rich mixed micelles formed. In addition, NOESY spectra show that the interaction patterns of SDS and Brij35 in mixed micelles are similar for three systems, as are the solubilization sites of curcumin. Therefore, for αSDS = 0.5 and 0.2 with single mixed micelles formed, the solubility of curcumin depends only on the mixed micelle composition, which is almost equal to the surfactant molar ratio. Although curcumin is solubilized in both separate micelles at αSDS = 0.8, a less stable micelle structure may be responsible for the low solubility. This study provides new insights into the investigation and application of mixed micelle solubilization.

Contrasting impacts of mixed nonionic surfactant micelles on plant growth in the delivery of fungicide and herbicide.

HYPOTHESIS: Nonionic alkyl ethoxylate surfactants are widely used in agrochemicals to facilitate the permeation of systemic herbicides and fungicides across the plant waxy film. Industrial grade surfactants are often highly mixed and how the mixing affects their interactions with pesticides and wax films remains largely unexplored. A better understanding could enable design of mixed nonionic surfactants for herbicides and fungicides to maximize their efficiency and reduce wastage whilst controlling their impact on plant wax films. EXPERIMENT: In this study, nonionic surfactants with general structure n-oxyethylene glycol monododecyl ether (C12En) were used to form surfactant mixtures with the same average ethoxylate numbers but different hydrophilic-lipophilic balance (HLB) values. Their mixed micellar systems were then used to solubilize a herbicide diuron (DN) and a fungicide cyprodinil (CP), followed by plant wax solubilization upon contact with wax films. These processes were monitored by 1H NMR and SANS. FINDING: Pesticide solubilization made surfactant micelles effectively more hydrophobic but subsequent wax dissolution caused pesticide release and the restoration of the micellar amphiphilicity. Nonionic surfactants with lower HLBs form larger nanoaggregates, show enhanced wettability, and have better ability to solubilize and permeate pesticides across the wax film, but may cause significant damage to plant growth. These observations help explain why herbicides applied on weeds would benefit from surfactants with lower HLB values while fungicides require surfactants with HLBs to balance between delivery efficiency and potential phytotoxicity risks.

New Preservative-Free Formulation for the Enhanced Ocular Bioavailability of Prostaglandin Analogues in Glaucoma.

Glaucoma is a wide-spread eye disease caused by elevated intraocular pressure. Uncontrolled, this pressure may lead to damages to the optic nerve. Prostaglandin analogues, such as latanoprost and travoprost (which are water-insoluble active substances), are the most used class of active pharmaceutical ingredient. To administer them as eye drops, preservatives, such as benzalkonium chloride, are used as solubilizers. The latter is known to cause a local inflammation when used chronically and is not recommended for patients with ocular surface disorders. In this work, we sought to use polysorbate 80 (PS80) as a solubilizing agent simultaneously with sodium hyaluronate (NaHA) as a thickener and cytoprotective agent for the corneal surface. The first part of this study assessed the compatibility of the excipients with the active substance, using physicochemical methods such as spectra fluorescence and differential scanning calorimetry (DSC), as well as the solubilization mechanism of PS80 regarding prostaglandin analogues using nuclear magnetic resonance (NMR). The second part evaluated the stability of a formula candidate, its viscosity upon instillation, and its pharmacokinetic profile in rabbits as compared to the commercially approved medicine Travatan®. The results show that sodium hyaluronate is inert with respect to travoprost, while PS80 successfully solubilizes it, meaning that benzalkonium chloride is no longer required. Moreover, the pharmacokinetic profiles of the rabbits showed that the original formula described in the present study enhanced the ocular bioavailability of the drug, making it a promising product to control intraocular pressure with a potential reduced dosage of travoprost, therefore minimizing its related side effects.

Poloxamer-enhanced solubility of griseofulvin and its related antifungal activity against Trichophyton spp

Abstract Poorly water-soluble drugs, such as the antifungal drug griseofulvin (GF), exhibit limited bioavailability, despite their high membrane permeability. Several technological approaches have been proposed to enhance the water solubility and bioavailability of GF, including micellar solubilization. Poloxamers are amphiphilic block copolymers that increase drug solubility by forming micelles and supra-micellar structures via molecular self-association. In this regard, the aim of this study was to evaluate the water solubility increment of GF by poloxamer 407 (P407) and its effect on the antifungal activity against three Trichophyton mentagrophytes and two T. rubrum isolates. The GF water solubility profile with P407 revealed a non-linear behavior, well-fitted by the sigmoid model of Morgan-Mercer-Flodin. The polymer promoted an 8-fold increase in GF water solubility. Fourier-transform infrared (FT-IR) spectroscopy, differential scanning calorimetry (DSC), and 2D nuclear magnetic resonance (NMR Roesy) spectroscopy suggested a GF-P407 interaction, which occurs in the GF cyclohexene ring. These results were supported by an increase in the water solubility of the GF impurities with the same molecular structure. The MIC values recorded for GF ranged from 0.0028 to 0.0172 mM, except for T. Mentagrophytes TME34. Notably, the micellar solubilization of GF did not increase its antifungal activity, which could be related to the high binding constant between GF and P407.

Towards Rational Biosurfactant Design-Predicting Solubilization in Rhamnolipid Solutions.

The efficiency of micellar solubilization is dictated inter alia by the properties of the solubilizate, the type of surfactant, and environmental conditions of the process. We, therefore, hypothesized that using the descriptors of the aforementioned features we can predict the solubilization efficiency, expressed as molar solubilization ratio (MSR). In other words, we aimed at creating a model to find the optimal surfactant and environmental conditions in order to solubilize the substance of interest (oil, drug, etc.). We focused specifically on the solubilization in biosurfactant solutions. We collected data from literature covering the last 38 years and supplemented them with our experimental data for different biosurfactant preparations. Evolutionary algorithm (EA) and kernel support vector machines (KSVM) were used to create predictive relationships. The descriptors of biosurfactant (logPBS, measure of purity), solubilizate (logPsol, molecular volume), and descriptors of conditions of the measurement (T and pH) were used for modelling. We have shown that the MSR can be successfully predicted using EAs, with a mean R2 val of 0.773 ± 0.052. The parameters influencing the solubilization efficiency were ranked upon their significance. This represents the first attempt in literature to predict the MSR with the MSR calculator delivered as a result of our research.

New Heteroleptic 3D Metal Complexes: Synthesis, Antimicrobial and Solubilization Parameters.

The microbial resistance to current antibiotics is increasing day by day, which in turn accelerating the development of new effective drugs. Several studies have proved the high antimicrobial potential of the interaction of several organic ligands with a variety of metal ions. In the present study, a conventional method has been adopted in the synthesis of twelve new heteroleptic complexes of cobalt (II), nickel (II), copper (II) and zinc (II) using three aldimines, namely, (HL1 ((E)-2-((4-chloro-2-hydroxybenzylidene)amino)-3,4-dimethyl-5-phenylcyclopent-2-en-1-one), HL2 ((Z)-3-((4-chlorobenzylidene)amino)-4-hydroxy-5-nitrobenzenesulfonic acid) HL3 (2,2'-((1,2-phenylenebis(azaneylylidene))bis(methaneylylidene))diphenol)) as primary ligands, while phenyl glycine was the secondary ligand. The synthesized compounds were characterized by UV-vis, IR and multinuclear (1H and 13C) NMR spectroscopy, elemental analysis, and electrical conductance. The IR study revealed the coordination of the aldimine derivatives with the -OH and N atom of imine moiety. In contrary to this, the phenyl glycine coordinated to the metal ions via oxygen of carboxylate and nitrogen of the amino group. The spectroscopic analysis unveiled the tetrahedral geometry of the synthesized metal (II) complexes, except for ligand HL3 which exhibited octahedral geometry. The synthesized compounds generally showed antibacterial activity for all microbes, except Ni (II) complexes lacking sensitivity. Furthermore, to access the bioavailability, the synthesized complexes were screened for their solubilization in the micellar media of sodium lauryl sulphate. The metal complex-surfactant interaction was revealed by UV-vis spectroscopy and electrical conductivity measurements.

The Effect of Enzymes and Sodium Lauryl Sulfate on the Surface Tension of Dissolution Media: Toward Understanding the Solubility and Dissolution of Carvedilol.

The objective of this work was to study the effect of the physiologically relevant enzymes pepsin, pancreatin, and the synthetic surfactant sodium lauryl sulfate (SLS) on the surface tension of the dissolution media and the solubility and dissolution of the weakly basic drug carvedilol. Compendial dissolution media and buffer solutions that simulate the gastrointestinal fluid, prepared with and without the addition of SLS, were used in this study. The surface tension of the dissolution media; critical micelle concentration (CMC) of SLS in buffer solutions; and size, polydispersity index, and zeta potential of SLS micelles loading carvedilol were determined. The solubility and dissolution of carvedilol were investigated and compared with those of the corresponding media prepared without the addition of pepsin, pancreatin, and SLS. Results showed that the addition of pepsin, pancreatin, and SLS lowered the surface tension of the dissolution media to 54.8, 55.7, and ~ 30 mN/m, respectively. The solubility of carvedilol was significantly enhanced with pepsin and SLS; however, no significant difference was found with pancreatin. The dissolution rate of carvedilol was fast in simulated gastric fluid with and without pepsin. The dissolution was further enhanced in media with pancreatin and SLS. The dissolution data were corroborated with the molar micellar solubilization (X) of SLS, ranging between 0.02 and 3.09. Understanding the effect of pepsin, pancreatin, and SLS on the surface tension of the dissolution media and the solubility and dissolution of poorly soluble drugs can improve our knowledge of the performance of these drugs in vivo.

Evaluation of ethoxylated nonionic surfactants for solubilization of chlorinated organic phases: Effects of partitioning loss and macroemulsion formation.

Selection of proper surfactants is critical for applying surfactant-enhanced remediation (SER) to sites contaminated with nonaqueous phase liquids (NAPLs). Here, ethoxylated nonionic surfactants (Tween 20, Tween 40, Tween 80, and Triton X-100) were evaluated for their applicability to remedy chlorinated organic phases, chloroform (CF), trichloroethylene (TCE), and tetrachloroethylene (PCE), on the basis of solubilization capacity, partitioning behavior, and macroemulsion formation. The most hydrophilic CF was not relevant for SER applications since excessive surfactant partitioning into CF rendered only few of them available for its solubilization. In contrast, the more hydrophobic TCE and PCE, having moderate surfactant partitioning, were effectively solubilized. Among Tween surfactants, a more hydrophobic surfactant showed a larger solubilization potential for both chloroethylenes, but it suffered from a greater partitioning loss. Depending on the type and extent of NAPL contaminations, thus, a prior consideration should be given to either solubilization capacity or partitioning loss when selecting the optimal Tween surfactant. Compared to Tween surfactants, the more hydrophobic Triton X-100 showed greater partitioning losses into all three NAPLs. Of particular, its partitioning into CF and TCE was nearly complete, making impractical its application to the remediation of both organic liquids. The formation of macroemulsions, characterized by a high turbidity, may significantly deteriorate SER applicability by producing undesirable flows in aquifers. Their formation became more problematic with the increasing surfactant hydrophilicity and the increasing NAPL hydrophobicity. When these combinations are applied, it is critical to keep such surfactant concentrations as to exploit the solubilization potential but not to cause the macroemulsion formation.

Predictive Modeling of Micellar Solubilization by Single and Mixed Nonionic Surfactants.

Micellar solubilization is an important concept in the delivery of poorly water-soluble drugs. The rational selection of the type and the amount of surfactant to be incorporated in a formulation require comprehensive solubility studies. These studies are time and material demanding, both of which are scarce, especially during late discovery and early development stages. We hypothesized that, if the solubilization mechanism or molecular interaction is similar, the solubilization capacity ratio (a newly defined parameter) is dictated by micellar structures, independent of drugs. We tested this hypothesis by performing solubility studies using 8 commonly used nonionic surfactants and 17 insoluble compounds with diverse characteristics. The results show a striking constant solubilization capacity ratio among the 8 nonionic surfactants, which allow us to develop predictive solubility models for both single and mixed surfactant systems. The vast majority of the predicted solubility values, using our developed models, fall within 2-fold of the experimentally determined values with high correlation coefficients. As expected, systems involving ionic surfactant sodium dodecyl sulfate, used as a negative control, do not follow this trend. Deviations from the model, observed in this study or envisioned, were discussed. In conclusion, we have established predictive models that are capable of predicting solubility in a wide range of nonionic micellar solutions with only 1 experimental measurement. The application of such a model will significantly reduce resource and greatly enhance drug product development efficiency.

Parameters influencing the course of passive drug loading into lipid nanoemulsions.

Passive drug loading can be used to effectively identify suitable colloidal lipid carrier systems for poorly water-soluble drugs. This method comprises incubation of preformed carrier systems with drug powder and subsequent determination of the resulting drug load of the carrier particles. Until now, the passive loading mechanism is unknown, which complicates reliable routine use. In this work, the influence of drug characteristics on the course of passive loading was investigated systematically varying drug surface area and drug solubility. Fenofibrate and flufenamic acid were used as model drugs; the carrier system was a trimyristin nanodispersion. Loading progress was analyzed by UV spectroscopy or by a novel method based on differential scanning calorimetry. While increasing drug solubility by micelle incorporation did not speed up passive loading, a large drug surface area and high water solubility were key parameters for fast loading. Since both factors are crucial in drug dissolution as described by the Noyes-Whitney equation, these findings point to a dissolution-diffusion-based passive loading mechanism. Accordingly, passive loading also occurred when drug and carrier particles were separated by a dialysis membrane. Knowledge of the loading mechanism allows optimizing the conditions for future passive loading studies and assessing the limitations of the method.

Solubilization and Enhancement of Ex Vivo Vaginal Delivery of Progesterone Using Solid Dispersions, Inclusion Complexes and Micellar Solubilization.

BACKGROUND: Progesterone (PG), a natural female sex hormone is used clinically in menopausal hormone replacement therapy and to control reproductive functions. Its very limited aqueous solubility results in reduced oral bioavailability and low patient compliance when administered in high doses. The aim of this study was to enhance PG aqueous solubility and vaginal delivery using solid dispersion, inclusion complex and micellar solubilization techniques. METHODS: PG solid dispersions and inclusion complexes were prepared by solvent evaporation method using different polymers, such as cyclodextrins, polyvinyl pyrrolidone (PVP), poly (ethylene glycol) 6000, Pluronic® F-127 and Pluronic® F-68. PG was also incorporated into polymeric micelles of Pluronic® F-127, Pluronic® F- 68, Brij®35 and Myrj®52. The prepared solid dispersions, inclusion complexes and micelles were characterized using different techniques. Drug permeability across rabbit vaginal mucosa was also studied. RESULTS: Dissolution studies of PG solid dispersions showed that the highest drug dissolution rate was achieved at PG/polymer weight ratio of 5:5. Further, complete drug dissolution was obtained for PG/Pluronic® F-127 solid dispersion after 15 min compared to 42% dissolution for the drug alone. Brij®35 micelles had a drug loading capacity ~15%, which increased the drug aqueous solubility by more than 20 folds. PG permeability coefficients through rabbit vaginal mucosa for PG/Brij®35 micelles and PG/Pluronic® F-127 micelles were ~ two times higher than that of the drug alone. CONCLUSION: These results confirm that Brij®35 and Pluronic® F-127 micelles are promising carriers to overcome PG shortcomings through enhancing its aqueous solubility and vaginal permeability.

Application of saponin biosurfactant and its recovery in the MEUF process for removal of methyl violet from wastewater.

The potential of saponin, a biosurfactant, in the micellar enhanced ultrafiltration (MEUF) process was tested systematically for removal of methyl violet from wastewater. For this, the aqueous extract of reetha (Sapindus mukorossi) pericarp which contains saponin was used as the biosurfactant. First, the micellar solubilization of methyl violet in saponin micelles was investigated in terms of molar solubilization power (SP) of saponin. It was observed that the adsorption of methyl violet on the agglomerates of saponin micelles was mainly responsible for the enhanced solubilization. The Gibbs free energy of solubilization (calculated as -29.63 kJ mol-1) suggested that process was feasible and spontaneous. The MEUF experiments were performed in batch as well as continuous mode using saponin biosurfactant, and the effect of operating parameters on permeate flux and solute retention were evaluated. The removal of methyl violet in MEUF process was >99% achieved with 10 kDa polyethersulfone (PES) membrane for feed dye concentration of 250 mg L-1 at studied conditions. Finally, the saponin in permeate was recovered using n-heptane and n-butanol by solvent extraction process. The solvent n-butanol showed better extraction efficiency as compared to n-heptane for saponin extraction.

Surfactant-enhanced remediation of polycyclic aromatic hydrocarbons: A review.

Polycyclic aromatic hydrocarbons (PAHs) are toxic, mutagenic and carcinogenic organic compounds that are widely present in the environment. The bioremediation of PAHs is an economical and environmentally friendly remediation technique, but it is limited because PAHs have low water solubility and fewer bioavailable properties. The solubility and bioavailability of PAHs can be increased by using surfactants to reduce surface tension and interfacial tension; this method is called surfactant-enhanced remediation (SER). The SER of PAHs is influenced by many factors such as the type and concentration of surfactants, PAH hydrophobicity, temperature, pH, salinity, dissolved organic matter and microbial community. Furthermore, as mixed micelles have a synergistic effect on PAH solubilisation, selecting the optimum ratio of mixed surfactants leads to effective PAH remediation. Although the use of surfactants inhibits microbial activities in some cases, this could be avoided by choosing an optimum combination of surfactants and a proper microbial community for the targeted PAH(s), resulting in up to 99.99% PAH removal. This article reviews the literature on SER of PAHs, including surfactant types, the synergistic effect of mixed micelles on PAH removal, the impact of surfactants on the PAH biodegradation process, factors affecting the SER process, and the mechanisms of surfactant-enhanced solubilisation of PAHs.

Surfactants from itaconic acid: Toxicity to HaCaT keratinocytes in vitro, micellar solubilization, and skin permeation enhancement of hydrocortisone.

One of the most widely used approaches for improving drug permeation across the stratum corneum barrier of the skin is the use of chemical penetration enhancers, such as surfactants. In this study, two anionic surfactants, named C12-OPK and C18-OPK, were synthesized via condensation of itaconic acid and fatty amines, with C12 and C18 alkyl chains, respectively. Assessment of impacts on HaCaT keratinocyte cell viability was used as indicator of their potential to cause skin irritation 24h post exposure (Alamar Blue assay). The LC50 values of C12-OPK and C18-OPK (144 and 85mg/L, respectively) were lower than LC50 values of the most used commercial surfactants (e.g. SDS). The effect of different surfactant concentrations (up to ten times the critical micellar concentration, CMC) on hydrocortisone (HC) solubility and permeation through porcine skin was also evaluated. Results showed that drug solubility increased linearly with increasing concentrations of both surfactants, as a consequence of the association between drug and micelles. In vitro permeation results showed that the permeability coefficient increased at surfactant concentrations lower than the CMC. In particular, a higher enhancement effect on drug permeation was obtained with C18-OPK, due to its hydrophobic properties that ensured a more effective HC permeation in comparison to C12-OPK.

Mechanistic Analysis of Cocrystal Dissolution as a Function of pH and Micellar Solubilization.

The purpose of this work is to provide a mechanistic understanding of the dissolution behavior of cocrystals under the influence of ionization and micellar solubilization. Mass transport models were developed by applying Fick's law of diffusion to dissolution with simultaneous chemical reactions in the hydrodynamic boundary layer adjacent to the dissolving cocrystal surface to predict the pH at the dissolving solid-liquid interface (i.e., interfacial pH) and the flux of cocrystals. To evaluate the predictive power of these models, dissolution studies of carbamazepine-saccharin (CBZ-SAC) and carbamazepine-salicylic acid (CBZ-SLC) cocrystals were performed at varied pH and surfactant concentrations above the critical stabilization concentration (CSC), where the cocrystals were thermodynamically stable. The findings in this work demonstrate that the pH dependent dissolution behavior of cocrystals with ionizable components is dependent on interfacial pH. This mass transport analysis demonstrates the importance of pH, cocrystal solubility, diffusivity, and micellar solubilization on the dissolution rates of cocrystals.

Cabozantinib Loaded DSPE-PEG2000 Micelles as Delivery System: Formulation, Characterization and Cytotoxicity Evaluation.

Cabozantinib, a potent pan-tyrosine kinase inhibitor, has been reported to provide enhanced antitumor efficacy by simultaneously inhibiting both MET and VEGF pathways, which are critical to tumor angiogenesis, survival and migration. It's very poor water solubility prevents its administration by the intravenous route, which may be important in patients unable to take the drug orally. In this study, we developed an efficient PEG-lipid-based polymeric micelle formulation with enhanced drug solubility and stability for cabozantinib delivery. DSPE-PEG2000 micelles encapsulating cabozantinib were prepared by a thin-film rehydration method followed by a lyophilization process to generate the dry dosage form. The average hydrodynamic diameter of freshly prepared micelles was 11 nm with a narrow size distribution, and the dry micelle cake could be fully reconstituted by rehydration. Approximately 75% of the drug was encapsulated into the lyophilized cake, and a sustained drug release profile was observed in simulated normal physiological release medium. Compared with the free cabozantinib solution, the drug-loaded micelles displayed significantly enhanced intracellular accumulation and cytotoxicity in human glioblastoma cancer cells and non-small lung cancer cells. These results suggest that the micellar formulation of cabozantinib may serve as a promising nanocarrier in anticancer treatments.

Application of micellar solubilization technology in pilot production of Chinese materia medica cataplasma containing volatile oil / 中草药

Objective: Through the studies on pilot production of the cataplasma of Chinese materia medica (CMM) containing volatile oil, to provide a rational and feasible preparation technology for the pilot production of CMM cataplasma, so as to promote the development of CMM cataplasma. Methods: The CMM containing volatile oil was extracted by steam distillation method (SDM), ethanol reflux extraction (ERE), and CO2 supercritical fluid extraction (SFE), respectively. The extracts were prepared to cataplasma in order to investigate the effects of extracting methods on the preparation process and quality of CMM cataplasma. The effects of micellar solubilization in the distilled liquid of STM on the quality of cataplasma such as adhesiveness, flexibleness, and stability were also investigated. Results: There was the significant difference among the groups of STM, ERE, and SFE on the quality of cataplasma. The extract by STM was beneficial to the preparation process and enhancement of the quality of cataplasma obviously, while the distilled liquid by STM would cause some limitations such as oil-water separation and volatile oil volatilization losses, which could contribute to obvious difference among batches. These disadvantages by STM would be overcome by the adoption of micellar solubilization technology and the stability would be increased (P < 0.01); segregation happened for the extract by ERE at room temperature, thereby, the water bath heating was needed in the preparation; this characteristics would cause the homogeneous appearance of cataplasma due to some black spots, lower flexibleness of matrix, and the preparation was not easy to control; the extract by SFE contained a lot of impurity of grease and performed half solid. As a result, it was very difficult to blend the extract by SFE with other materials uniformly, the adhesive force of cataplasma was also reduced. In addition, the cost of higher energy consumption and production was another disadvantage for SFE. Conclusion: The STM followed by micellar solubilization would be a feasible preparation technology for the pilot production of CMM cataplasma containing volatile oil, so it is worth popularizing and applying widely.