Chemical composition, cytotoxicity, antimicrobial, antibiofilm, and anti-quorum sensing potential of Mentha Piperita essential oil against the oral pathogen Streptococcus mutans.

Dental caries is a highly prevalent oral disease affecting billions of individuals globally. The disease occurs chemically as a result of breakdown of the tooth surface attributed to metabolic activity in colonizing biofilm. Biofilms, composed of exopolysaccharides and proteins, protect bacteria like Streptococcus mutans, which is notable for its role in tooth decay due to its acid-producing abilities. While various antimicrobial agents may prevent biofilm formation, these drugs often produce side effects including enamel erosion and taste disturbances. This study aimed to examine utilization of the Mentha piperita essential oil as a potential antibiofilm activity agent against S. mutans. M. piperita oil significantly (1) reduced bacterial biofilm, (2) exhibited a synergistic effect when combined with chlorhexidine, and (3) did not induce cell toxicity. Chemical analysis identified the essential oil with 99.99% certainty, revealing menthol and menthone as the primary components, constituting approximately 42% and 26%, respectively. Further, M. piperita oil eradicated preformed biofilms and inhibited biofilm formation at sub-inhibitory concentrations. M. piperita oil also interfered with bacterial quorum sensing communication and did not produce any apparent cell toxicity in immortalized human keratinocytes (HaCaT). M. piperita represented an alternative substance for combating S. mutans and biofilm formation and a potential combination option with chlorhexidine to minimize side effects. An in-situ performance assessment requires further studies.

Structural properties and microbial diversity of the biofilm colonizing plastic substrates in Terra Nova Bay (Antarctica).

Microbial colonization on plastic polymers has been extensively explored, however the temporal dynamics of biofilm community in Antarctic environments are almost unknown. As a contribute to fill this knowledge gap, the structural characteristics and microbial diversity of the biofilm associated with polyvinyl chloride (PVC) and polyethylene (PE) panels submerged at 5 m of depth and collected after 3, 9 and 12 months were investigated in four coastal sites of the Ross Sea. Additional panels placed at 5 and 20 m were retrieved after 12 months. Chemical characterization was performed by FTIR-ATR and Raman (through Surface-Enhanced Raman Scattering, SERS) spectroscopy. Bacterial community composition was quantified at a single cell level by Catalyzed Reporter Deposition Fluorescence In Situ Hybridization (CARD-FISH) and Confocal Laser Scanning Microscopy (CLSM); microbial diversity was assessed by 16S rRNA gene sequencing. This multidisciplinary approach has provided new insights into microbial community dynamics during biofouling process, shedding light on the biofilm diversity and temporal succession on plastic substrates in the Ross Sea. Significant differences between free-living and microbial biofilm communities were found, with a more consolidated and structured community composition on PVC compared to PE. Spectral features ascribable to tyrosine, polysaccharides, nucleic acids and lipids characterized the PVC-associated biofilms. Pseudomonadota (among Gamma-proteobacteria) and Alpha-proteobacteria dominated the microbial biofilm community. Interestingly, in Road Bay, close to the Italian "Mario Zucchelli" research station, the biofilm growth - already observed during summer season, after 3 months of submersion - continued afterwards leading to a massive microbial abundance at the end of winter (after 12 months). After 3 months, higher percentages of Gamma-proteobacteria in Road Bay than in the not-impacted site were found. These observations lead us to hypothesize that in this site microbial fouling developed during the first 3 months could serve as a starter pioneering community stimulating the successive growth during winter.

Surfactants' Interplay with Biofilm Development in Staphylococcus and Candida.

The capacity of micro-organisms to form biofilms is a pervasive trait in the microbial realm. For pathogens, biofilm formation serves as a virulence factor facilitating successful host colonization. Simultaneously, infections stemming from biofilm-forming micro-organisms pose significant treatment challenges due to their heightened resistance to antimicrobial agents. Hence, the quest for active compounds capable of impeding microbial biofilm development stands as a pivotal pursuit in biomedical research. This study presents findings concerning the impact of three surfactants, namely, polysorbate 20 (T20), polysorbate 80 (T80), and sodium dodecyl sulfate (SDS), on the initial stage of biofilm development in both Staphylococcus aureus and Candida dubliniensis. In contrast to previous investigations, we conducted a comparative assessment of the biofilm development capacity of these two taxonomically distant groups, predicated on their shared ability to reduce TTC. The common metabolic trait shared by S. aureus and C. dubliniensis in reducing TTC to formazan facilitated a simultaneous evaluation of biofilm development under the influence of surfactants across both groups. Our results revealed that surfactants could impede the development of biofilms in both species by disrupting the initial cell attachment step. The observed effect was contingent upon the concentration and type of compound, with a higher inhibition observed in culture media supplemented with SDS. At maximum concentrations (5%), T20 and T80 significantly curtailed the formation and viability of S. aureus and C. dubliniensis biofilms. Specifically, T20 inhibited biofilm development by 75.36% in S. aureus and 71.18% in C. dubliniensis, while T80 exhibited a slightly lower inhibitory effect, with values ranging between 66.68% (C. dubliniensis) and 65.54% (S. aureus) compared to the controls. Incorporating these two non-toxic surfactants into pharmaceutical formulations could potentially enhance the inhibitory efficacy of selected antimicrobial agents, particularly in external topical applications.

Assessing the efficiency and microbial diversity of H2S-removing biotrickling filters at various pH conditions.

This study aimed to investigate the operation of three parallel biotrickling filters (BTFs) in removing H2S at different pH conditions (haloalkaliphilic, neutrophilic, and acidophilic) and their associated microbial population in the biodesulfurization process. BTF columns were inoculated with enriched inoculum and experiments were performed by gradually reducing Empty Bed Retention Time (EBRT) and increasing inlet concentration in which the maximum removal efficiency and maximum elimination capacity in EBRT 60 s reached their maximum level in haloalkaline condition (91% and 179.5 g S-H2S m-3 h-1). For visualizing the attached microbial biofilms on pall rings, Scanning Electron Microscopy (SEM) was used and microbial community structure analysis by NGS showed that the most abundant phyla in haBTF, nBTF, and aBTF belong to Gammaproteobacteria, Betaproteobacteria, and Acidithiobacillia, respectively. Shannon and Simpson indexes evaluation showed a lower diversity of bacteria in the aBTF reactor than that of nBTF and haBTF and beta analysis indicated a different composition of bacteria in haBTF compared to the other two filters. These results indicated that the proper performance of BTF under haloalkaliphilic conditions is the most effective way for H2S removal from air pollutants of different industries.

Selection of starter lactic acid bacteria capable of forming biofilms on wooden vat prototypes for their future application in traditional Sicilian goat's milk cheese making.

In this study, 327 presumptive lactic acid bacteria (LAB) were isolated from goats' milk acid curds produced at a Sicilian dairy farm with the aim to identify potential starter cultures for traditional cheeses. All isolates were first processed by randomly amplified polymorphic DNA (RAPD)-PCR analysis. This approach identified 63 distinct strains which were evaluated for their acidifying capacity. Only 15 strains specifically stood out for their acidification capacity and were identified through 16S rRNA gene sequencing as Lactococcus lactis (11 strains) Enterococcus faecalis (three strains), and Ligilactobacillus animalis (one strain). Notably, all 15 LAB isolates produced bacteriocin-like inhibitory substances and anti-biofilm compounds, against both planktonic and biofilm forms of Listeria monocytogenes, Salmonella Enteritidis, Escherichia coli, and Staphylococcus aureus, albeit at varying levels. Among these 15 LAB, En. faecalis RGM25 and Lc. lactis RGM55, susceptible to five antibiotics tested, were put in contact with wooden vat prototypes, because all equipment used in traditional cheese production in Sicily are made of wood. Scanning electron microscopy and bacterial plate counts of the wooden vat prototypes showed the development of biofilms at levels of approximately 6.0 log CFU/cm2. Overall, this study contributes to establishing a custom-made LAB starter cultures with bio-preservatives properties for Sicilian cheese productions.

Current Emerging Concepts on the Pathogenesis of Peri-implant Diseases: A Narrative Review.

OBJECTIVES: The aim of this narrative review is to describe the emerging evidence concerning etiological factors and pathophysiological mechanisms involved in peri-implant inflammatory diseases. MATERIAL AND METHODS: An electronic search for articles published until November 2022 was conducted in MEDLINE by three independent reviewers to identify manuscripts reporting data on etiological factors and pathophysiological mechanisms associated with peri-implant diseases. RESULTS: Current evidence suggests that peri-implant mucositis and peri-implantitis are inflammatory conditions linked to a microbial challenge. However, in recent years, there has been increasing evidence indicating that certain peri-implant inflammatory conditions may not be primarily related to biofilm-mediated infectious processes but rather to other biological mechanisms, such as a foreign body response. CONCLUSION: The current evidence, not only in the dental literature, opens new avenues for a more complex interpretation of the etiopathogenetic factors involved in peri-implant diseases. A better understanding of various factors related to the host response, including dysbiosis mechanisms associated with changes in microbiota composition, is necessary for a more precise physiopathological characterization of these diseases.

Characterization of Staphylococcus Species Isolates from Sheep Milk with Subclinical Mastitis: Antibiotic Resistance, Enterotoxins, and Biofilm Production.

Subclinical mastitis represents one of the most contagious diseases affecting animals involved in dairy production systems. Although coagulase-negative staphylococci (CoNSs) have been considered minor pathogens for many years, they have recently emerged as opportunistic pathogens in mastitis disorders. The objectives of this work were to assess the antimicrobial resistance profile and the ability to produce a biofilm in comparison with a reference strain and to search for genes related to biofilm production, antimicrobial resistance, and enterotoxins in 18 isolates of Staphylococcus species from the milk of sheep with subclinical mastitis, collected from different Sicilian farms. This knowledge is essential to provide basic information on the pathogenicity and virulence of staphylococcal species and their impact on animal health. All isolates were resistant to ampicillin, 88.8% to streptomycin, 77.7% to gentamicin, 44.4% to chloramphenicol, 27.7% to erythromycin, and 11.1% to tetracycline, and two isolates were strong biofilm producers. Antibiotic resistance gene profiling showed that 16.6% of isolates possess the blaZ gene, whereas the search of biofilm-associated genes revealed the occurrence of the sasC gene in 33.3% of isolates, the ica gene in 27.7%, and bap and agr (accessory gene regulator) genes in 16.6% of isolates. Altogether, the results of this study indicate that CoNSs can acquire virulence genes and could have a role as pathogens in subclinical mastitis.

The colonization of an irradiated environment: the case of microbial biofilm in a nuclear reactor.

The investigation of the microbial community change in the biofilm, growing on the walls of a containment tank of TRIGA nuclear reactor revealed a thriving community in an oligotrophic and heavy-metal-laden environment, periodically exposed to high pulses of ionizing radiation (IR). We observed a vertical IR resistance/tolerance stratification of microbial genera, with higher resistance and less diversity closer to the reactor core. One of the isolated Bacillus strains survived 15 kGy of combined gamma and proton radiation, which was surprising. It appears that there is a succession of genera that colonizes or re-colonizes new or IR-sterilized surfaces, led by Bacilli and/or Actinobacteria, upon which a photoautotrophic and diazotrophic community is established within a fortnight. The temporal progression of the biofilm community was evaluated also as a proxy for microbial response to radiological contamination events. This indicated there is a need for better dose-response models that could describe microbial response to contamination events. Overall, TRIGA nuclear reactor offers a unique insight into IR microbiology and provides useful means to study relevant microbial dose-thresholds during and after radiological contamination.

Microbial biofilms for self-powered noncontact sensing.

Noncontact sensing technology plays a vital role in the intelligent human-machine interface, as the essential medium for exchanging information between human and electronic devices. To date, several inorganic materials-based noncontact sensing techniques have been used to accurately detect touch, electrical property, and physical motion. However, limited available materials, dependence on additional power supplies, and poor power production performance, have seriously obstructed the practical applications of noncontact sensing technology. Here, we developed simple self-powered noncontact sensors (SNSs) assembled using a typical G. sulfurreducens biofilm as the core component. In noncontact mode, the sensor demonstrated excellent self-powered sensing performance with maximum voltage output of 10 V and a current of 60 nA, a maximum sensing range of 40 cm which is the farthest reported to date. Depending on its excellent sensing characteristic, the SNSs was used to monitor human breathing in this work. Furthermore, an array of united SNSs was able to localize external electric fields and effectively extend the sensing area by increasing the number of devices. Compared to traditional inorganic materials, microbial biofilms have the advantages of wide existence, self-proliferation, low cost, environmental friendliness, and ultra-fast self-healing property (seconds level). The proposed biofilm SNSs in our work provides new insights for noncontact power generation of biomaterials and self-driven sensing.

The Efficacy and Safety of an Intra-articular Dual-Acting Antibacterial Agent (TNP-2092) for Implant Infection-Associated Methicillin-Resistant Staphylococcus aureus.

Owing to the presence of microbial biofilm on the implant, the eradication of biofilm-associated infections poses a challenge for antibiotic therapies. The study aimed to investigate the efficacy and safety of the novel antibiotic agent TNP-2092 in the context of implant infections. In vivo, rats with periprosthetic joint infection (PJI) treated with antibiotics showed an increase in body weight and decrease in swelling, temperature, and width of knee, compared with the control group. Meanwhile, inflammatory markers in synovium and serum were decreased in the TNP-2092 group, consistent with the pathological results. Moreover, TNP-2092 was effective in eliminating bacteria and disruption biofilm formation, and further alleviated the abnormal bone absorption and reactive bone changes around the prosthesis. In conclusion, intra-articular injection of TNP-2092 is safe and effective in treating knee PJI in a rat model. The study provides a foundation for the future utilization of TNP-2092 in the management of implant-related infections.

Effects of two novel denture cleansers on multispecies microbial biofilms, stain removal and the denture surface: an in vitro study.

BACKGROUND: The continuously increasing demand for removable denture appliances and the importance of adequate denture cleaning have led to the development of various denture cleansing products. The aim of this study was to evaluate the efficacy of two novel denture cleansing agents (GE and TM) and three commonly available cleansers (0.5% sodium hypochlorite; NaClO, 0.12% chlorhexidine gluconate; CHX, and Polident®; POL) on multispecies microbial biofilm formation, stain removal and physical properties of dentures. METHODS: The antimicrobial activities of denture cleansing agents were determined against major oral opportunistic pathogens including Streptococcus mutans, Staphylococcus aureus, Escherichia coli and Candida albicans, using time-kill assays. Multispecies microbial biofilms grown on acrylic resins for 72 h were generated to determine the antibiofilm effects of cleansing agents by confocal laser scanning microscopy (CLSM). Evaluations of the tea and coffee stain removal properties and the alterations in the physical properties of dentures were also performed. The toxicity of cleanser residues released from denture acrylics to fibroblast cells was investigated using MTT assay. RESULTS: All denture cleansing agents tested could effectively kill oral bacteria and Candida albicans. Furthermore, after immersion for more than 3 h, the cleansers Polident®, GE and TM could efficiently penetrate and inhibit multispecies denture biofilms with effects similar to 10 min of immersion in 0.5% NaClO. However, immersion in 0.12% CHX for 20 min showed less antibiofilm activity. The NaClO solution had the highest efficacy for removing stains from the artificial teeth. Conversely, the CHX solution enhanced tea and coffee staining, and the teeth immersed in this solution showed clinically unacceptable colour changes (ΔE > 5.5). However, the colour differences of teeth stained and immersed in POL, GE and TM cleansers were in the clinically acceptable range. There was no significant difference among the POL, GE and TM cleansers in terms of stain removal efficacy. The cleansers GE and TM did not alter the surface roughness and colour of the materials, moreover the residues of both cleansers did not exhibit cytotoxicity. CONCLUSION: Two novel denture cleansing agents containing natural products, GE and TM exhibited effective antimicrobial activity, antibiofilm and stain removal capabilities without toxicity or disturbance of the physical properties of acrylics.

Synergistic Effect of Plant Compounds in Combination with Conventional Antimicrobials against Biofilm of Staphylococcus aureus, Pseudomonas aeruginosa, and Candida spp.

Bacterial and fungal biofilm has increased antibiotic resistance and plays an essential role in many persistent diseases. Biofilm-associated chronic infections are difficult to treat and reduce the efficacy of medical devices. This global problem has prompted extensive research to find alternative strategies to fight microbial chronic infections. Plant bioactive metabolites with antibiofilm activity are known to be potential resources to alleviate this problem. The phytochemical screening of some medicinal plants showed different active groups, such as stilbenes, tannins, alkaloids, terpenes, polyphenolics, flavonoids, lignans, quinones, and coumarins. Synergistic effects can be observed in the interaction between plant compounds and conventional drugs. This review analyses and summarises the current knowledge on the synergistic effects of plant metabolites in combination with conventional antimicrobials against biofilms of Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. The synergism of conventional antimicrobials with plant compounds can modify and inhibit the mechanisms of acquired resistance, reduce undesirable effects, and obtain an appropriate therapeutic effect at lower doses. A deeper knowledge of these combinations and of their possible antibiofilm targets is needed to develop next-generation novel antimicrobials and/or improve current antimicrobials to fight drug-resistant infections attributed to biofilm.

A Rapidly Responsive Sensor for Wireless Detection of Early and Mature Microbial Biofilms.

Biofilm-associated infections, which are able to resist antibiotics, pose a significant challenge in clinical treatments. Such infections have been linked to various medical conditions, including chronic wounds and implant-associated infections, making them a major public-health concern. Early-detection of biofilm formation offers significant advantages in mitigating adverse effects caused by biofilms. In this work, we aim to explore the feasibility of employing a novel wireless sensor for tracking both early-stage and matured-biofilms formed by the medically relevant bacteria Staphylococcus aureus and Pseudomonas aeruginosa. The sensor utilizes electrochemical reduction of an AgCl layer bridging two silver legs made by inkjet-printing, forming a part of near-field-communication tag antenna. The antenna is interfaced with a carbon cloth designed to promote the growth of microorganisms, thereby serving as an electron source for reduction of the resistive AgCl into a highly-conductive Ag bridge. The AgCl-Ag transformation significantly alters the impedance of the antenna, facilitating wireless identification of an endpoint caused by microbial growth. To the best of our knowledge, this study for the first time presents the evidence showcasing that electrons released through the actions of bacteria can be harnessed to convert AgCl to Ag, thus enabling the wireless, battery-less, and chip-less early-detection of biofilm formation.

Biological macromolecules-based nanoformulation in improving wound healing and bacterial biofilm-associated infection: A review.

A chronic wound is a serious complication associated with diabetes mellitus and is difficult to heal due to high glucose levels, oxidative stress, and biofilm-associated microbial infection. The structural complexity of microbial biofilm makes it impossible for antibiotics to penetrate the matrix, hence conventional antibiotic therapies became ineffective in clinical settings. This demonstrates an urgent need to find safer alternatives to reduce the prevalence of chronic wound infection associated with microbial biofilm. A novel approach to address these concerns is to inhibit biofilm formation using biological-macromolecule based nano-delivery system. Higher drug loading efficiency, sustained drug release, enhanced drug stability, and improved bioavailability are advantages of employing nano-drug delivery systems to prevent microbial colonization and biofilm formation in chronic wounds. This review covers the pathogenesis, microbial biofilm formation, and immune response to chronic wounds. Furthermore, we also focus on macromolecule-based nanoparticles as wound healing therapies to reduce the increased mortality associated with chronic wound infections.

[Evaluation of the antibacterial effect of passive nanoimpregnation of tooth root dentin by real-time PCR]. / Otsenka antibakterial'nogo effekta passivnoi nanoimpregnatsii dentina kornya zuba metodom polimeraznoi tsepnoi reaktsii v real'nom vremeni.

OBJECTIVE: Assessment of antibacterial properties of a new intracanal paste based on calcium hydroxocuprate (CHC) and silver nanoparticles hydrosol for passive root impregnation. MATERIAL AND METHODS: The study included 55 teeth with 69 root canals belonging patients with chronic apical periodontitis. The main group, including 44 root canals, was filled with a new paste based on CHC and silver nanoparticles for 7 days after preparation and irrigation. In the control group, 25 root canals were sealed with an aqueous paste of calcium hydroxide for 14 days. The presence of the endodontic microorganisms was evaluated by real-time PCR. RESULTS AND DISCUSSION: Further analysis showed that the amount of the DNA, common for P. gingivalis, T. forsythia and T. denticola, after treatment was less in the main group, where the new paste was applied. These results were significant at the p=0.05 level (p=0.005, p=0.006, p=0.003 according to each mentioned bacterial sample). No significant differences were found between the groups in the number of genome equivalents specific for P. intermedia and F. nucleatum (p=0.543, p=0.554). CONCLUSION: These findings suggest that the new method of passive root impregnation with the CHC and silver nanoparticles paste may be an effective method for the treatment of chronical apical periodontitis.

Microbial biofilm-based hydrovoltaic technology.

Hydrovoltaic electricity generation (HEG) utilizes the latent environmental heat stored in water, and subsequently harvests the electrical energy. However, sustainable HEG has remained extremely challenging due either to complex fabrication and high cost, or to restricted environmental compatibility and renewability. Electroactive microorganisms are environmentally abundant and viable in performing directional electron transport to produce currents. These distinctive features have inspired microbial HEG systems that can convert environmental energy into hygroelectricity upon water circulation from raindrops, waves, and water moisture, and has recently succeeded as proof of concept for becoming a cutting-edge biotechnology. In this review, recent advances in microbial biofilm-based hydrovoltaic technology are highlighted to better understand a promising method of electricity generation from environmental energy with the aim of practical applications.

Bacterial biofilm prevalence in dental unit waterlines: a systematic review and meta-analysis.

BACKGROUNDS: Numerous studies have shown that dental unit water lines (DUWLs) are often contaminated by a wide range of micro-organisms (bacteria, fungi, protozoa) and various prevalence have been reported for it in previous studies. Therefore, this review study aims to describe the prevalence of bacterial biofilm contamination of DUWLs. METHODS: This is a systematic review and meta-analysis in which the related keywords in different international databases, including Medline (via PubMed) and Scopus were searched. The retrieved studies were screened and the required data were extracted from the included studies. Three standard methods including American Dental Association (ADA), The Center for Disease Control and Prevention (CDC) and contaminated > 100 CFU/ml(C-100) standards were used to assess the bacterial biofilm contamination of DUWLs. All studies that calculated the prevalence of bacterial biofilm contamination of DUWLs, and English full-text studies were included in the meta-analysis. Studies that did not have relevant data or used unusual laboratory methods were excluded. Methodological risk of bias was assessed by a related checklist and finally, the data were pooled by fixed or random-effect models. RESULTS: Seven hundred and thirty-six studies were identified and screened and 26 related studies were included in the meta-analysis. The oldest included study was published in 1976 and the most recent study was published in 2020. According to the ADA, CDC and C-100 standards, the prevalence of bacterial contamination was estimated to be 85.0% (95% confidence interval (CI): 66.0-94.0%), 77.0% (95%CI: 66.0-85.0%) and 69.0% (95%CI: 67.0-71.0%), respectively. The prevalence of Legionella Pneumophila and Pseudomonas Aeruginosa in DUWLs was estimated to be 12.0% (95%CI: 10.0-14.0%) and 8.0% (95%CI: 2.0-24.0%), respectively. CONCLUSION: The results of this review study suggested a high prevalence of bacterial biofilm in DUWLs; therefore, the use of appropriate disinfecting protocol is recommended to reduce the prevalence of contamination and reduce the probable cross-infection.

Microbial granules on reactors performance during organic butyrate digestion: clean production.

This critical review for anaerobic degradation of complex organic compounds like butyrate using reactors has been enormously applied for biogas production. Biogas production rate has a great impact on: reactor granulation methanogenesis, nutrient content, shear velocity, organic loading and loss of nutrients taking place in the reactor continuously. Various technologies have been applied to closed anaerobic reactors to improve biogas production and treatment efficiency. Recent reviews showed that the application of closed anaerobic reactors can accelerate the degradation of organics like volatile fatty acid-butyrate and affect microbial biofilm formation by increasing the number of methanogens and increase methane production 16.5 L-1 CH4 L-1 POME-1. The closed anaerobic reactors with stable microbial biofilm and established organic load were responsible for the improvement of the reactor and methane production. The technology mentioned in this review can be used to monitor biogas concentration, which directly correlates to organic concentrations. This review attempts to evaluate interactions among the: degradation of organics, closed anaerobic reactors system, and microbial granules. This article provides a useful picture for the improvement of the degradation of organic butyrate for COD removal, biogas and methane production in an anaerobic closed reactor.

Recent reviews showed that the application of closed anaerobic reactors can accelerate the degradation of organic compounds, such as volatile fatty acid-butyrate, and affect microbial biofilm formation by increasing the number of methanogens, thus enhancing biogas production. The closed anaerobic reactors with stable microbial biofilm established the organic load and improved the performance of the reactor for methane production. The technology used involves monitoring biogas concentrations which correlates with organic concentrations. This review attempts to evaluate interactions among: the degradation of organics, closed anaerobic reactors system, and microbial granules. This review, therefore, provides a useful picture for the improvement of butyrate degradation for COD removal and methane production with the help of various anaerobic closed reactors. The performance of UASBR depends on granulation. The granulation process in UASB reactors can be divided into four steps: (1) Transport of cells to the surface of other cells; (2) Initial reversible adsorption by physicochemical forces; (3) Irreversible adhesion of the cells by microbial appendages and/or polymers; and (4) Multiplication of the cells and development of the granules. Any factor which can complement any one of the four steps will be able to accelerate the granulation process and shorten the startup time of UASB reactors.

[Eco-physiological functions of soil microbial biofilms: A review]. / åœŸå£¤å¾®ç”Ÿç‰©è†œç”Ÿç†ç”Ÿæ€åŠŸèƒ½ç ”ç©¶è¿›å±•.

Soil microbial biofilms (SMBs) are a biological community of soil bacteria and their accumulative extracellular polymeric substances (EPS), which are the initial status and the most important components of biological soil crusts. SMBs, as the most common mode of soil bacterium survival, not only greatly contribute to the survival of free-living cells, but also stick to soil particles and roots, performing a variety of important ecological functions. Based on the structure and composition analysis of SMBs, we gave a summary of eco-physiological functions of SMBs involving soil quality and plant health. SMBs have higher metabolic activity than free-living cells. It promotes EPS secretion and organic turnover, which is important for soil fertility, pollutant decomposition, and aggregate formation. SMBs help improve plant nutrient utilization and stress resistance through the synergy of microorganisms, promotion of plant growth, promoting substance secretion and immobilization of EPS. In the future, it will be critical to uncover the micro-mechanisms underlying SMBs' eco-physiological functions and to screen functional soil bacterium strains.

Microbial Biofilms at Meat-Processing Plant as Possible Places of Bacteria Survival.

Biofilm contamination in food production threatens food quality and safety, and causes bacterial infections. Study of food biofilms (BF) is of great importance. The taxonomic composition and structural organization of five foods BF taken in different workshops of a meat-processing plant (Moscow, RF) were studied. Samples were taken from the surface of technological equipment and premises. Metagenomic analysis showed both similarities in the presented microorganisms dominating in different samples, and unique families prevailing on certain objects were noted. The bacteria found belonged to 11 phyla (no archaea). The dominant ones were Actinobacteria, Bacteroidetes, Firmicutes, and Proteobacteria. The greatest diversity was in BFs taken from the cutting table of raw material. Biofilms' bacteria may be the cause of meat, fish and dairy products spoilage possible representatives include Pseudomonas, Flavobacterium, Arcobacter, Vagococcus, Chryseobacterium, Carnobacterium, etc.). Opportunistic human and animal pathogens (possible representatives include Arcobacter, Corynebacterium, Kocuria, etc.) were also found. Electron-microscopic studies of BF thin sections revealed the following: (1) the diversity of cell morphotypes specific to multispecies BFs; (2) morphological similarity of cells in BFs from different samples, micro-colonial growth; (3) age heterogeneity of cells within the same microcolony (vegetative and autolyzed cells, resting forms); (4) heterogeneity of the polymer matrix chemical nature according to ruthenium red staining.