Degradation of carbamazepine in surface water: performance of Pd-modified TiO2 and Ce-modified ZnO as photocatalysts.

Carbamazepine is a widely used antiepileptic drug to control and treat a variety of disorders that is frequently detected in surface water, and in municipal and urban wastewater. This recalcitrant pollutant could be removed by alternative advanced oxidation technology such as heterogeneous photocatalysis. Ce-modified ZnO and Pd-modified TiO2 were synthesized by a microwave-assisted sol-gel method. According to the characterizations (Raman spectroscopy, UV-Vis diffuse reflectance spectroscopy, scanning electron microscopy, and X-ray photoelectron spectroscopy), a mixture of oxides was determined in both materials: CeO2/ZnO and PdO/TiO2. Photocatalytic degradation of carbamazepine in pure water under visible light (3 h) was assayed. The degradation percentage obtained with each catalyst was 80%, 53%, 20%, and 9% for ZnO, Ce-modified ZnO, TiO2, and Pd-modified TiO2, respectively. The leaching of Zn as a possible source of water contamination was tested, finding the lowest value for Ce-modified ZnO by adjusting the initial pH up to neutrality. Later, an environmentally relevant concentration of carbamazepine (228 µg L-1) was assayed, using local surface water (pH = 8.3). Despite the presence of other compounds in the real water matrix, after 5 h of photocatalysis, a 56% of degradation of the pharmaceutical and low leaching of Zn were achieved. The use of Ce-modified ZnO activated by visible light is a promising strategy for the abatement of pharmaceutical active compounds.

Solid Lipid Nanoparticles (SLN) and Nanostructured Lipid Carriers (NLC) Prepared by Microwave and Ultrasound-Assisted Synthesis: Promising Green Strategies for the Nanoworld.

Many pharmaceutically active molecules are highly lipophilic, which renders their administration and adsorption in patients extremely challenging. Among the countless strategies to overcome this problem, synthetic nanocarriers have demonstrated superb efficiency as drug delivery systems, since encapsulation can effectively prevent a molecules' degradation, thus ensuring increased biodistribution. However, metallic and polymeric nanoparticles have been frequently associated with possible cytotoxic side effects. Solid lipid nanoparticles (SLN) and nanostructured lipid carriers (NLC), which are prepared with physiologically inert lipids, therefore emerged as an ideal strategy to bypass toxicities issues and avoid the use of organic solvents in their formulations. Different approaches to preparation, using only moderate amounts of external energy to facilitate a homogeneous formation, have been proposed. Greener synthesis strategies have the potential to provide faster reactions, more efficient nucleation, better particle size distribution, lower polydispersities, and furnish products with higher solubility. Particularly microwave-assisted synthesis (MAS) and ultrasound-assisted synthesis (UAS) have been utilized in the manufacturing of nanocarrier systems. This narrative review addresses the chemical aspects of those synthesis strategies and their positive influence on the characteristics of SLNs and NLCs. Furthermore, we discuss the limitations and future challenges for the manufacturing processes of both types of nanoparticles.

Microwave-assisted Synthesis of Pharmacologically Active 4-Phenoxyquinolines and their Benzazole-quinoline Hybrids Through SNAr Reaction of 4,7-dichloroquinoline and Phenols Using [bmim][PF6] as a Green Solvent.

BACKGROUND: Quinoline and its derivatives have been shown to display a wide spectrum of biological properties, especially anticancer activity. Particularly, diverse potent anticancer drugs are based on the 4-phenoxyquinoline skeleton, acting as small-molecules VEGR2 and/or c-Met kinase inhibitors. However, the design of new drugs based on these quinoline derivatives remains a challenge. Up till now, all approaches to 4-phenoxyquinoline skeleton construction do not obey any green chemistry principles. AIMS AND OBJECTIVES: Developing a new, and efficient protocol for the synthesis of potentially bioactive 4-phenoxyquinoline derivatives and benzazole-quinoline-quinoline hybrids from commercially available 4,7-dichloroquinoline and phenol derivatives using microwave energy (MW) in the presence of 1-methyl 3-butylimidazolium hexafluorophosphate. METHODS: Neweco-efficient protocol for valuable 7-chloro-4-phenoxyquinolines and their hybrids, which is based on SNAr reaction of 4,7-dichloroquinoline with respective simple phenols and hydroxyaryl- benzazoles under MWenergy in green reaction media, is studied for the first time. RESULTS: We found that among various solvents tested, the ionic liquid 1-methyl 3-butylimidazolium hexafluorophosphate ([bmim][PF6]) favored the SNAr reaction affording phenoxyquinolines in excellent yields (72-82%) in 10 min. The developed protocol allowed to obtain quickly in good yields (48-60%) new diverse benzazole-quinoline hybrids, which are expected to be pharmacologically active. According to the calculated bioactivity scores, new hybrids are potential kinase inhibitors that could be useful in anticancer drug research. CONCLUSION: We developed for the first time a new green, efficient method to prepare potentially bioactive functionalized 7-chloro-4-phenoxyquinolines and benzazole-quinoline molecules. Good to excellent yields of the quinoline products, use of MW irradiation in ([bmim] [PF6] as a green solvent, and short times of reactions are some of the main advantages of this new protocol.

Synthesis of ß-Cyclodextrin-Decorated Dendritic Compounds Based on EDTA Core: A New Class of PAMAM Dendrimer Analogs.

In this work, two dendritic molecules containing an ethylenediaminetetraacetic acid (EDTA) core decorated with two and four ß-cyclodextrin (ßCD) units were synthesized and fully characterized. Copper(I)-catalyzed alkyne-azide cycloaddition (CuAAC) click chemistry under microwave irradiation was used to obtain the target compounds with yields up to 99%. The classical ethylenediamine (EDA) core present in PAMAM dendrimers was replaced by an EDTA core, obtaining platforms that increase the water solubility at least 80 times compared with native ßCD. The synthetic methodology presented here represents a convenient alternative for the rapid and efficient construction of PAMAM analogs. These molecules are envisaged for future applications as drug carriers.

Preparation of Silicon Hydroxyapatite Nanopowders under Microwave-Assisted Hydrothermal Method.

The synthesis of partially substituted silicon hydroxyapatite (Si-HAp) nanopowders was systematically investigated via the microwave-assisted hydrothermal process. The experiments were conducted at 150 °C for 1 h using TMAS (C4H13NO5Si2) as a Si4+ precursor. To improve the Si4+ uptake in the hexagonal structure, the Si precursor was supplied above the stoichiometric molar ratio (0.2 M). The concentration of the TMAS aqueous solutions used varied between 0.3 and 1.8 M, corresponding to saturation levels of 1.5-9.0-fold. Rietveld refinement analyses indicated that Si incorporation occurred in the HAp lattice by replacing phosphate groups (PO43-) with the silicate (SiO4-) group. FT-IR and XPS analyses also confirmed the gradual uptake of SiO4- units in the HAp, as the saturation of Si4+ reached 1.8 M. TEM observations confirmed that Si-HAp agglomerates had a high crystallinity and are constituted by tiny rod-shaped particles with single-crystal habit. Furthermore, a reduction in the particle growth process took place by increasing the Si4+ excess content up to 1.8 M, and the excess of Si4+ triggered the fine rod-shaped particles self-assembly to form agglomerates. The agglomerate size that occurred with intermediate (0.99 mol%) and large (12.16 mol%) Si contents varied between 233.1 and 315.1 nm, respectively. The excess of Si in the hydrothermal medium might trigger the formation of the Si-HAp agglomerates prepared under fast kinetic reaction conditions assisted by the microwave heating. Consequently, the use of microwave heating-assisted hydrothermal conditions has delivered high processing efficiency to crystallize Si-HAp with a broad content of Si4+.

Microwave-Assisted Preparation of Luminescent Inorganic Materials: A Fast Route to Light Conversion and Storage Phosphors.

Luminescent inorganic materials are used in several technological applications such as light-emitting displays, white LEDs for illumination, bioimaging, and photodynamic therapy. Usually, inorganic phosphors (e.g., complex oxides, silicates) need high temperatures and, in some cases, specific atmospheres to be formed or to obtain a homogeneous composition. Low ionic diffusion and high melting points of the precursors lead to long processing times in these solid-state syntheses with a cost in energy consumption when conventional heating methods are applied. Microwave-assisted synthesis relies on selective, volumetric heating attributed to the electromagnetic radiation interaction with the matter. The microwave heating allows for rapid heating rates and small temperature gradients yielding homogeneous, well-formed materials swiftly. Luminescent inorganic materials can benefit significantly from the microwave-assisted synthesis for high homogeneity, diverse morphology, and rapid screening of different compositions. The rapid screening allows for fast material investigation, whereas the benefits of enhanced homogeneity include improvement in the optical properties such as quantum yields and storage capacity.

Design and Microwave-Assisted Synthesis of Aza-Resveratrol Analogs with Potent Cholinesterase Inhibition.

BACKGROUND: Currently approved Alzheimer's disease medications mainly comprise acetylcholinesterase inhibitors. Many of these inhibitors are either natural compounds or synthetic molecules inspired in natural compounds. Hybrid molecules that can interact with different target sites of the enzyme could lead to the discovery of effective multitarget drugs. OBJECTIVE: To design, synthesize, and evaluate a series of new aza-resveratrol analogs as in vitro acetyl- and butyrylcholinesterase inhibitors. METHODS: The synthesis is achieved by a simple and efficient microwave-assisted method, from commercially available starting materials. Compounds are designed as hybrids of an aza-stilbene nucleus (Schiff base) connected to a tertiary amine by a hydrocarbon chain of variable length, designed to interact both with the peripheric anionic site and the catalytic site of the enzyme. RESULTS: All the derivatives inhibit both enzymes in a concentration-dependent manner, acting as moderate to potent cholinesterase inhibitors. The most potent inhibitors are compounds 12b (IC50 = 0.43 µM) and 12a (IC50 = 0.31 µM) for acetyl- and butyrylcholinesterase, respectively. Compounds 12a and 12b also exhibit significant acetylcholinesterase inhibition in SH-SY5Y human neuroblastoma cells without cytotoxic properties. Enzyme kinetic studies and molecular modeling reveal that inhibitor 12b targets both the catalytic active site and the peripheral anionic site of acetylcholinesterase what makes it able to modulate the self-induced ß-amyloid aggregation. Furthermore, the molecular modeling analysis helps to assess the impact of the linker length in the inhibitory activity of this family of new cholinesterase inhibitors. CONCLUSION: These compounds have the potential to serve as a dual binding site inhibitor and might provide a useful template for the development of new anti-Alzheimer's disease agents.

Innovative Three-Step Microwave-Promoted Synthesis of N-Propargyltetrahydroquinoline and 1,2,3-Triazole Derivatives as a Potential Factor Xa (FXa) Inhibitors: Drug Design, Synthesis, and Biological Evaluation.

The coagulation cascade is the process of the conversion of soluble fibrinogen to insoluble fibrin that terminates in production of a clot. Factor Xa (FXa) is a serine protease involved in the blood coagulation cascade. Moreover, FXa plays a vital role in the enzymatic sequence which ends with the thrombus production. Thrombosis is a common causal pathology for three widespread cardiovascular syndromes: acute coronary syndrome (ACS), venous thromboembolism (VTE), and strokes. In this research a series of N-propargyltetrahydroquinoline and 1,2,3-triazole derivatives as a potential factor Xa (FXa) inhibitor were designed, synthesized, and evaluated for their FXa inhibitor activity, cytotoxicity activity and coagulation parameters. Rational design for the desired novel molecules was performed through protein-ligand complexes selection and ligand clustering. The microwave-assisted synthetic strategy of selected compounds was carried out by using Ullmann-Goldberg, N-propargylation, Mannich addition, Friedel-Crafts, and 1,3-dipolar cycloaddition type reactions under microwave irradiation. The microwave methodology proved to be an efficient way to obtain all novel compounds in high yields (73-93%). Furthermore, a thermochemical analysis, optimization and reactivity indexes such as electronic chemical potential (µ), chemical hardness (η), and electrophilicity (ω) were performed to understand the relationship between the structure and the energetic behavior of all the series. Then, in vitro analysis showed that compounds 27, 29-31, and 34 exhibited inhibitory activity against FXa and the corresponding half maximal inhibitory concentration (IC50) values were calculated. Next, a cell viability assay in HEK293 and HepG2 cell lines, and coagulation parameters (anti FXa, Prothrombin time (PT), activated Partial Thromboplastin Time (aPTT)) of the most active novel molecules were performed to determine the corresponding cytotoxicity and possible action on clotting pathways. The obtained results suggest that compounds 27 and 29 inhibited FXa targeting through coagulation factors in the intrinsic and extrinsic pathways. However, compound 34 may target coagulation FXa mainly by the extrinsic and common pathway. Interestingly, the most active compounds in relation to the inhibition activity against FXa and coagulation parameters did not show toxicity at the performed coagulation assay concentrations. Finally, docking studies confirmed the preferential binding mode of N-propargyltetrahydroquinoline and 1,2,3-triazole derivatives inside the active site of FXa.

Microwave-assisted synthesis and pharmacological screening of some triazolothiadiazole derivatives

In this study, twenty-two new [1,2,4]triazolo[3,4-b][1,3,4]thiadiazoles (5a-n, 6a-h) were synthesized under microwave irradiation (MWI). The chemical structures of the compounds were elucidated by their IR, 1H-NMR, LC-MS, and elemental analysis. The compounds were tested for antinociceptive activity by using the tail clip, tail flick, hot plate, and writhing methods in mice. The varying levels of antinociceptive activity of the compounds were compared with those of aspirin. Among these compounds, compound 5g and 5j were found to be significantly more active than the other compounds and the standard in the tests. Also, inhibitory effects of the test compounds on COX-1 and COX-2 activities were investigated. DuP-697 for COX-2 and SC-560 for COX-1 were used as reference standards.

Design, synthesis and biological evaluation of N-substituted α-hydroxyimides and 1,2,3-oxathiazolidine-4-one-2,2-dioxides with anticonvulsant activity.

In this investigation, we studied a family of compounds with an oxathiazolidine-4-one-2,2-dioxide skeleton and their amide synthetic precursors as new anticonvulsant drugs. The cyclic structures were synthesized using a three-step protocol that include solvent-free reactions and microwave-assisted heating. The compounds were tested in vivo through maximal electroshock seizure test in mice. All the structures showed activity at the lower doses tested (30 mg/Kg) and no signs of neurotoxicity were detected. Compound encoded as 1g displayed strong anticonvulsant effects in comparison with known anticonvulsants (ED50 = 29 mg/Kg). First approximations about the mechanisms of action of the cyclic structures were proposed by docking simulations and in vitro assays against sodium channels (patch clamp methods).

A Focused Library of NO-Donor Compounds with Potent Antiproliferative Activity Based on Green Multicomponent Reactions.

Cancer is the second leading cause of death worldwide. Herein, a strategy to quickly and efficiently identify novel lead compounds to develop anticancer agents, using green multicomponent reactions followed by antiproliferative activity and structure-activity relationship studies, is described. A second-generation focused library of nitric oxide-releasing compounds was prepared by microwave-assisted Passerini and Ugi reactions. Nearly all compounds displayed potent antiproliferative activities against a panel of human solid tumor cell lines, with 1-phenyl-1-[(tert-butylamino)carbonyl]methyl 3-[(3-phenylsulfonyl-[1,2,5]oxadiazol-4-yl N2 -oxide)oxy]benzoate (4 k) and N-[1-(tert-butylaminocarbonyl)-1-phenylmethyl]-N-(4-methylphenyl)-3-(3-phenylsulfonyl-[1,2,5]oxadiazol-4-yl N2 -oxide)oxyphenyl carboxamide (6 d) exhibiting the strongest activity on SW1573 lung cell line (GI50 =110 and 21 nm) with selectivity indices of 70 and 470, respectively. Preliminary mechanistic studies suggest a relationship between NO release and antiproliferative activity. Our strategy allowed the rapid identification of at least two molecules as future candidates for the development of potent antitumor drugs.

Synthesis of New 5-Aryl-benzo[f][1,7]naphthyridines via a Cascade Process (Ugi-3CR/Intramolecular Aza-Diels-Alder Cycloaddition)/Aromatization.

A series of eight new 5-aryl-benzo[f][1,7]naphthyridines were synthesized in 17 to 64% overall yields via an improved MW-assisted cascade-like one pot process (Ugi⁻three component reaction/intramolecular aza-Diels-Alder cycloaddition) coupled to an aromatization process from tri-functional dienophile-containing ester-anilines, substituted benzaldehydes and the chain-ring tautomerizable 2-isocyano-1-morpholino-3-phenylpropan-1-one as starting reagents, under mild conditions. The doubly activated dienophile and the aza-diene functionalities of the eight new Ugi-adducts were exploited to perform an in situ aza-Diels-Alder cycloaddition/aromatization (dehydration/oxidation) process, toward the complex polysubstituted 5-aryl-polyheterocycles, which could be taken as starting point for further SAR studies because the benzo[f][1,7]naphthyridine is the core of various bioactive products. It is relevant to emphasize that the synthesis or isolation of benzo[f][1,7]naphthyridines containing a substituted aromatic ring in the C-5 position, has not been published before.

Butenafine and analogues: An expeditious synthesis and cytotoxicity and antifungal activities.

The incidence of fungal infections is considered a serious public health problem worldwide. The limited number of antimycotic drugs available to treat human and animal mycosis, the undesirable side effects and toxicities of the currently available drugs, and the emergence of fungal resistance emphasizes the urgent need for more effective antimycotic medicines. In this paper, we describe a rapid, simple, and efficient synthetic route for preparation of the antifungal agent butenafine on a multigram scale. This novel synthetic route also facilitated the preparation of 17 butenafine analogues using Schiff bases as precursors in three steps or less. All the synthesized compounds were evaluated against the yeast, Cryptococcus neoformans/C. gattii species complexes and the filamentous fungi Trichophyton rubrum and Microsporum gypseum. Amine 4bd, a demethylated analogue of butenafine, and its corresponding hydrochloride salt showed low toxicity in vitro and in vivo while maintaining inhibitory activity against filamentous fungi.

Synthesis of Polyheterocyclic Pyrrolo[3,4-b]pyridin-5-ones via a One-Pot (Ugi-3CR/aza Diels-Alder/N-acylation/aromatization/SN2) Process. A Suitable Alternative towards Novel Aza-Analogues of Falipamil.

We describe the one-pot synthesis of twenty polyheterocyclic pyrrolo[3,4-b]pyridin-5-ones via a cascade process (Ugi-3CR/aza Diels-Alder/N-acylation/aromatization) in 20 to 95% overall yields, as well as four pharmacologically promising analogues via an improved cascade process (Ugi-3CR/aza Diels-Alder/N-acylation/aromatization/SN2): two piperazine-linked pyrrolo[3,4-b]pyridin-5-ones in 33 and 34%, and a couple of Falipamil aza-analogues in 30 and 35% overall yields. It is worth highlighting the good substrate scope found, because final products are furnished with alkyl, aryl, and heterocyclic substituents. The use of chain-ring tautomerizable isocyanides (as key reagents for the Ugi-type three component reaction) allowed for a rapid and efficient assembly of the polysubstituted oxindoles, which were used in situ toward the complex products, conferring features like robustness, sustainability, and the one-pot approach to this synthetic methodology.

An Easy-Made, Economical and Efficient Carbon-Doped Amorphous TiO2 Photocatalyst Obtained by Microwave Assisted Synthesis for the Degradation of Rhodamine B.

The search for novel materials and the development of improved processes for water purification have attracted the interest of researchers worldwide and the use of titanium dioxide in photocatalytic processes for the degradation of organic pollutants contained in water has been one of the benchmarks. Compared to crystalline titanium dioxide (cTiO2), the amorphous material has the advantages of having a higher adsorption capacity and being easier to dope with metal and non-metal elements. In this work, we take advantage of these two features to improve its photocatalytic properties in the degradation of Rhodamine B. The structural characterization by XRD analysis gives evidence of its amorphous nature and the SEM micrographs portray the disc morphology of 300 nm in diameter with heterogeneous grain boundaries. The degradation of Rhodamine B tests with the amorphous TiO2 using visible light confirm its improved catalytic activity compared to that of a commercial product, Degussa P25, which is a well-known crystalline material.

Studies on free radical scavenging, cancer cell antiproliferation, and calf thymus DNA interaction of Schiff bases.

Thirty-nine Schiff bases were synthesized by performing microwave-assisted condensation of the corresponding aldehydes and aromatic amines. Their reactive nitrogen species (RNS) scavenging activity and inhibitory effects against cancer cell growth were then subsequently investigated. Additionally, the interaction between the calf thymus DNA (ctDNA) and selected Schiff bases was evaluated using fluorescence spectroscopy, and their binding parameters were determined. The yields of the various compounds ranged from moderate to excellent (43-99%) after only a 2-min reaction. The hydroxylated Schiff bases 2, 8, 15, 16, 18, 20, 29, 32, 34, and 37 were found to be potent scavengers of 2,2-diphenyl-1-picrylhydrazyl (DPPH) radicals with half-maximal scavenging concentration (SC50) values lower than that of the positive control, resveratrol. The presence of hydroxyl substituents on the aromatic rings also proved essential to the cytotoxicity of the compounds. The binding constants (Kb) obtained using fluorescence spectroscopy ranged from 0.37 to 3.07×105Lmol-1, and were strongly influenced by the structure and hydroxylation degree. Schiff bases 3 and 8 showed promising cytotoxic activity, with half-maximal growth inhibitory (GI50) values in the same order of magnitude as those exhibited by the reference drug, doxorubicin against various cell lines. Interestingly, these compounds also showed the highest Kb, suggesting that the cytotoxic activity could be related to their interaction with the DNA of the tumor cells. The results of this study highlighted some Schiff bases as potential lead compounds for the design of new free radical scavengers and anticancer agents.

Novel sulfamides and sulfamates derived from amino esters: Synthetic studies and anticonvulsant activity.

We report herein the design and optimization of a novel series of sulfamides and sulfamates derived from amino esters with anticonvulsant properties. The structures were designed based on the pharmacophoric pattern previously proposed, with the aim of improving the anticonvulsant action. The compounds were obtained by a new synthetic procedure with microwave assisted heating and the use of adsorbents in the isolation process. All the derivatives showed protection against the maximal electroshock seizure test (MES test) in mice at the lowest dose tested (30 mg/kg) but they did not show significant protection against the chemical induced convulsion by pentylenetetrazole. These results verify the ability of the computational model for designing new anticonvulsants structures with anti-MES activity. Additionally, we evaluated the capacity of the synthesized structures to bind to the benzodiazepine binding site (BDZ-bs) of the γ-aminobutiric acid receptor (GABAA receptor). Some of them showed medium to low affinity for the BDZ-bs.

Sustainable application of pecan nutshell waste: Greener synthesis of Pd-based nanocatalysts for electro-oxidation of methanol.

Palladium-based electrocatalysts are widely used in alkaline direct alcohol fuel cells. The synthesis and characterization of carbon-supported bimetallic nanoparticles (NP) of AuPd and AgPd is described using pecan nutshell extract (Carya illinoinensis) which serves as both, reducing and the stabilizing agent. This environmentally friendly route generates bimetallic NP for a wide range of applications, including electrocatalysis; since particularly AuPd NP proved to be a potentially suitable electrode material for alkaline direct methanol fuel cells. The electrocatalytic activity of these nanomaterials was comparable to commercially available Pd/C 1% in the electro-oxidation of methanol in alkaline media.