Nanocatalysis MoS2/rGO: An Efficient Electrocatalyst for the Hydrogen Evolution Reaction.

In this study, a systematic investigation of MoS2 nanostructure growth on a SiO2 substrate was conducted using a two-stage process. Initially, a thin layer of Mo was grown through sputtering, followed by a sulfurization process employing the CVD technique. This two-stage process enables the control of diverse nanostructure formations of both MoS2 and MoO3 on SiO2 substrates, as well as the formation of bulk-like grain structures. Subsequently, the addition of reduced graphene oxide (rGO) was examined, resulting in MoS2/rGO(n), where graphene is uniformly deposited on the surface, exposing a higher number of active sites at the edges and consequently enhancing electroactivity in the HER. The influence of the synthesis time on the treated MoS2 and also MoS2/rGO(n) samples is evident in their excellent electrocatalytic performance with a low overpotential.

Exciton-Phonon Interactions in Strained Domes of Monolayer MoS2 Studied by Resonance Raman Spectroscopy.

This work describes a resonance Raman study performed in the domes of monolayer MoS2 using 23 different laser excitation energies covering the visible and near-infrared (NIR) ranges. The multiple excitation results allowed us to investigate the exciton-phonon interactions of different phonons (A'1, E', and LA) with different excitonic optical transitions in biaxially strained monolayer MoS2. The analysis of the intensities of the two first-order peaks, A'1 and E', and the double-resonance 2LA Raman band as a function of the laser excitation furnished the values of the energies of the indirect exciton and the direct excitonic transitions in the strained MoS2 domes. It was noticed that the out-of-plane A'1 phonon mode is significantly enhanced only by the indirect exciton I and the C exciton, whereas the in-plane E' mode is only enhanced by the C exciton of the MoS2 dome, thus revealing the weak interaction of these phonons with the A and B excitons in the strained MoS2 domes. On the other hand, the 2LA Raman band is significantly enhanced at the indirect exciton I and by the A (or B) exciton but not enhanced by the C exciton, thus showing that the LA edge phonons that participate in the double-resonance process in MoS2 have a weak interaction with the C exciton.

Detection of Acetaminophen in Groundwater by Laccase-Based Amperometric Biosensors Using MoS2 Modified Carbon Paper Electrodes.

The use of enzyme-based biosensors for the detection and quantification of analytes of interest such as contaminants of emerging concern, including over-the-counter medication, provides an attractive alternative compared to more established techniques. However, their direct application to real environmental matrices is still under investigation due to the various drawbacks in their implementation. Here, we report the development of bioelectrodes using laccase enzymes immobilized onto carbon paper electrodes modified with nanostructured molybdenum disulfide (MoS2). The laccase enzymes were two isoforms (LacI and LacII) produced and purified from the fungus Pycnoporus sanguineus CS43 that is native to Mexico. A commercial purified enzyme from the fungus Trametes versicolor (TvL) was also evaluated to compare their performance. The developed bioelectrodes were used in the biosensing of acetaminophen, a drug widely used to relieve fever and pain, and of which there is recent concern about its effect on the environment after its final disposal. The use of MoS2 as a transducer modifier was evaluated, and it was found that the best detection was achieved using a concentration of 1 mg/mL. Moreover, it was found that the laccase with the best biosensing efficiency was LacII, which achieved an LOD of 0.2 µM and a sensitivity of 0.108 µA/µM cm2 in the buffer matrix. Moreover, the performance of the bioelectrodes in a composite groundwater sample from Northeast Mexico was analyzed, achieving an LOD of 0.5 µM and a sensitivity of 0.015 µA/µM cm2. The LOD values found are among the lowest reported for biosensors based on the use of oxidoreductase enzymes, while the sensitivity is the highest currently reported.

Effect of Pt Decoration on the Optical Properties of Pristine and Defective MoS2: An Ab-Initio Study.

Using structural relaxation calculations and first-principles molecular dynamics (FPMD), we performed numerical simulations to explore the interaction of a 2D MoS2 surface and a platinum atom, calculating the optical properties of the resulting material. We explored three initial positions for the interaction of the Pt atom and the pristine MoS2 surface, plus another position between Pt and the MoS2 surface with a sulfur vacancy VS. The surface absorbed the Pt atom in all cases considered, with absorption energies ranging from -2.77 eV to -5.83 eV. We calculated the optical properties and band structure of the two cases with the largest absorption energies (-3.45 eV and -5.83 eV). The pristine MoS2 is a semiconductor with a gap of around 1.80 eV. With the adsorption of the Pt atom (the -3.45 eV case), the material reduces its band gap to 0.95 eV. Additionally, the optical absorption in the visible range is greatly increased. The energy band structure of the 2D MoS2 with a sulfur vacancy VS shows a band gap of 0.74 eV, with consequent changes in its optical properties. After the adsorption of Pt atoms in the VS vacancy, the material has a band gap of 1.06 eV. In this case, the optical absorption in the visible range increases by about eight times. The reflectivity in the infrared range gets roughly doubled for both situations of the Pt-absorbed atom considered. Finally, we performed two FPMD runs at 300 K to test the stability of the cases with the lowest and highest absorption energies observed, confirming the qualitative results obtained with the structural relaxations.

On the Electronic Structure of 2H-MoS2: Correlating DFT Calculations and In-Situ Mechanical Bending on TEM.

We present a systematic density functional theory study to determine the electronic structure of bending 2H-MoS2 layers up to 75° using information from in-situ nanoindentation TEM observations. The results from HOMO/LUMO and density of states plots indicate a metallic transition from the typical semiconducting phase, near Fermi energy level (EF) as a function of bending, which can mainly occur due to bending curvatures inducing a stretching and contracting of sulfur-sulfur chemical bonds located mostly over basal (001)-plane; furthermore, molybdenum ions play a major role in such transitions due to reallocation of their metallic d-character orbitals and the creation of "free electrons", possibly having an overlap between Mo-dx2-y2 and Modz2 orbitals. This research on the metallic transition of 2H-MoS2 allows us to understand the high catalytic activity for MoS2 nanostructures as extensively reported in the literature.

Stability of Non-Concentric, Multilayer, and Fully Aligned Porous MoS2 Nanotubes.

Nanotubes made of non-concentric and multiple small layers of porous MoS2 contain inner pores suitable for membrane applications. In this study, molecular dynamics simulations using reactive potentials were employed to estimate the stability of the nanotubes and how their stability compares to macroscopic single- (1L) and double-layer MoS2 flakes. The observed stability was explained in terms of several analyses that focused on the size of the area of full-covered layers, number of layers, polytype, and size of the holes in the 1L flakes. The reactive potential used in this work reproduced experimental results that have been previously reported, including the small dependency of the stability on the polytype, the formation of S-S bonds between inter- and intra-planes, and the limit of stability for two concentric rings forming a single ring-like flake.

Multifunctional Hybrid MoS2-PEGylated/Au Nanostructures with Potential Theranostic Applications in Biomedicine.

In this work, flower-like molybdenum disulfide (MoS2) microspheres were produced with polyethylene glycol (PEG) to form MoS2-PEG. Likewise, gold nanoparticles (AuNPs) were added to form MoS2-PEG/Au to investigate its potential application as a theranostic nanomaterial. These nanomaterials were fully characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), photoelectron X-ray spectroscopy (XPS), Fourier-transformed infrared spectroscopy (FTIR), cyclic voltammetry and impedance spectroscopy. The produced hierarchical MoS2-PEG/Au microstructures showed an average diameter of 400 nm containing distributed gold nanoparticles, with great cellular viability on tumoral and non-tumoral cells. This aspect makes them with multifunctional characteristics with potential application for cancer diagnosis and therapy. Through the complete morphological and physicochemical characterization, it was possible to observe that both MoS2-PEG and MoS2-PEG/Au showed good chemical stability and demonstrated noninterference in the pattern of the cell nucleus, as well. Thus, our results suggest the possible application of these hybrid nanomaterials can be immensely explored for theranostic proposals in biomedicine.

Broadband, Ultra-High-Responsive Monolayer MoS2/SnS2 Quantum-Dot-Based Mixed-Dimensional Photodetector.

Atomically thin two-dimensional (2D) materials have gained significant attention from the research community in the fabrication of high-performance optoelectronic devices. Even though there are various techniques to improve the responsivity of the photodetector, the key factor limiting the performance of the photodetectors is constrained photodetection spectral range in the electromagnetic spectrum. In this work, a mixed-dimensional 0D/2D SnS2-QDs/monolayer MoS2 hybrid is fabricated for high-performance and broadband (UV-visible-near-infrared (NIR)) photodetector. Monolayer MoS2 is deposited on SiO2/Si using chemical vapor deposition (CVD), and SnS2-QDs are prepared using a low-cost solution-processing method. The high performance of the fabricated 0D/2D photodetector is ascribed to the band bending and built-in potential created at the junction of SnS2-QDs and MoS2, which enhances the injection and separation efficiency of the photoexcited charge carriers. The mixed-dimensional structure also suppresses the dark current of the photodetector. The decorated SnS2-QDs on monolayer MoS2 not only improve the performance of the device but also extends the spectral range to the UV region. Photoresponsivity of the device for UV, visible, and NIR region is found to be ∼278, ∼ 435, and ∼189 A/W, respectively. Fabricated devices showed maximum responsivity under the visible region attributed to the high absorbance of monolayer MoS2. The response time of the fabricated device is measured as ∼100 ms. These results reveal that the development of a mixed-dimensional (0D/2D) SnS2-QDs/MoS2-based high-performance and broadband photodetector is technologically promising for next-generation optoelectronic applications.

Biomimetic Catalysts Based on Au@TiO2-MoS2-CeO2 Composites for the Production of Hydrogen by Water Splitting.

The photocatalytic hydrogen evolution reaction (HER) by water splitting has been studied, using catalysts based on crystalline TiO2 nanowires (TiO2NWs), which were synthesized by a hydrothermal procedure. This nanomaterial was subsequently modified by incorporating different loadings (1%, 3% and 5%) of gold nanoparticles (AuNPs) on the surface, previously exfoliated MoS2 nanosheets, and CeO2 nanoparticles (CeO2NPs). These nanomaterials, as well as the different synthesized catalysts, were characterized by electron microscopy (HR-SEM and HR-TEM), XPS, XRD, Raman, Reflectance and BET surface area. HER studies were performed in aqueous solution, under irradiation at different wavelengths (UV-visible), which were selected through the appropriate use of optical filters. The results obtained show that there is a synergistic effect between the different nanomaterials of the catalysts. The specific area of the catalyst, and especially the increased loading of MoS2 and CeO2NPs in the catalyst substantially improved the H2 production, with values of ca. 1114 µm/hg for the catalyst that had the best efficiency. Recyclability studies showed only a decrease in activity of approx. 7% after 15 cycles of use, possibly due to partial leaching of gold nanoparticles during catalyst use cycles. The results obtained in this research are certainly relevant and open many possibilities regarding the potential use and scaling of these heterostructures in the photocatalytic production of H2 from water.

Electronic structure of molecular hydrogen in MoS2nanopores.

Atom controlled sub-nanometer MoS2pores have been recently fabricated with promising applications, such gas sensing, hydrogen storage and DNA translocation. In this work we carried out first-principles calculations of hydrogen adsorption in tiny MoS2nanopores. Some of the pores show metallic behaviour whereas others have a sizeable band gap. Whereas adsorption of molecular hydrogen on bare pores are dominated by physisorption, adsorption in the nanopores show chemisorption behaviour with high selectivity depending on the pore inner termination. Finally, we show that functionalization with copper atoms leads to does not improve dignificantly the adsorption energies of selected pores.

Triboelectric Energy Harvester Based on Stainless Steel/MoS2 and PET/ITO/PDMS for Potential Smart Healthcare Devices.

The smart healthcare devices connected with the internet of things (IoT) for medical services can obtain physiological data of risk patients and communicate these data in real-time to doctors and hospitals. These devices require power sources with a sufficient lifetime to supply them energy, limiting the conventional electrochemical batteries. Additionally, these batteries may contain toxic materials that damage the health of patients and environment. An alternative solution to gradually substitute these electrochemical batteries is the development of triboelectric energy harvesters (TEHs), which can convert the kinetic energy of ambient into electrical energy. Here, we present the fabrication of a TEH formed by a stainless steel substrate (25 mm × 15 mm) coated with a molybdenum disulfide (MoS2) film as top element and a polydimethylsiloxane (PDMS) film deposited on indium tin oxide coated polyethylene terephthalate substrate (PET/ITO). This TEH has a generated maximum voltage of 2.3 V and maximum output power of 112.55 µW using a load resistance of 47 kΩ and a mechanical vibration to 59.7 Hz. The proposed TEH could be used to power potential smart healthcare devices.

Bacterial Nanocellulose/MoS2 Hybrid Aerogels as Bifunctional Adsorbent/Photocatalyst Membranes for in-Flow Water Decontamination.

To address the problems associated with the use of unsupported nanomaterials, in general, and molybdenum disulfide (MoS2), in particular, we report the preparation of self-supported hybrid aerogel membranes that combine the mechanical stability and excellent textural properties of bacterial nanocellulose (BC)-based organic macro/mesoporous scaffolds with the excellent adsorption-cum-photocatalytic properties and high contaminant removal performance of MoS2 nanostructures. A controlled hydrothermal growth and precise tuning of the synthetic parameters allowed us to obtain BC/MoS2-based porous, self-supported, and stable hybrid aerogels with a unique morphology resulting from a molecular precision in the coating of quantum-confined photocatalytic MoS2 nanostructures (2-4 nm crystallite size) on BC nanofibrils. These BC/MoS2 samples exhibit high surface area (97-137 m2·g-1) and pore volume (0.28-0.36 cm3·g-1) and controlled interlayer distances (0.62-1.05 nm) in the MoS2 nanostructures. Modification of BC with nanostructured MoS2 led to an enhanced pollutants removal efficiency of the hybrid aerogels both by adsorptive and photocatalytic mechanisms, as indicated by a detailed study using a specifically designed membrane photoreactor containing the developed photoactive/adsorptive BC/MoS2 hybrid membranes. Most importantly, the prepared BC/MoS2 aerogel membranes showed high performance in the photoassisted in-flow removal of both organic dye (methylene blue (MB)) molecules (96% removal within 120 min, Kobs = 0.0267 min-1) and heavy metal ions (88% Cr(VI) removal within 120 min, Kobs = 0.0012 min-1), separately and/or simultaneously, under UV-visible light illumination as well as excellent recyclability and photostability. Samples with interlayer expanded MoS2 nanostructures were particularly more efficient in the removal of smaller species (CrO42-) as compared to larger (MB) dye molecules. The prepared hybrid aerogel membranes show promising behavior for application in in-flow water purification, representing a significant advancement in the use of self-supported aerogel membranes for photocatalytic applications in liquid media.

Microwave effects on NiMoS and CoMoS single-sheet catalysts.

Single-sheet nanoclusters of MoS2, NiMoS or CoMoS are widely used in hydrodesulfurization (HDS) catalysis in the petroleum industry. In HDS reactions under microwave irradiation, experiments indirectly pointed out that for pristine MoS2 reaction rates are accelerated because hot spots are generated on the catalyst bed. In this work, we investigated NiMoS and CoMoS isolated single-sheet substituted catalysts before and after thiophene adsorption focusing on quantifying the effect of microwave irradiation. For that purpose, density functional theory (DFT) molecular charge densities of each system were decomposed according to the distributed multipole analysis (DMA) of Stone. Site dipole values of each system were directly associated with a larger or smaller interaction with the microwave field according to a proposed general approach. We showed that microwave enhancement of HDS reaction rates can occur more efficiently in the CoMoS and NiMoS promoted clusters compared to pristine MoS2 in the following order: CoMoS > NiMoS > MoS2. The atomic origin of the catalyst hot spots induced by microwaves was clearly established in the promoted clusters.

Band Gap Tuning in 2D Layered Materials by Angular Rotation.

We present a series of computer-assisted high-resolution transmission electron (HRTEM) simulations to determine Moiré patters by induced twisting effects between slabs at rotational angles of 3°, 5°, 8°, and 16°, for molybdenum disulfide, graphene, tungsten disulfide, and tungsten selenide layered materials. In order to investigate the electronic structure, a series of numerical simulations using density functional methods (DFT) methods was completed using Cambridge serial total energy package (CASTEP) with a generalized gradient approximation to determine both the band structure and density of states on honeycomb-like new superlattices. Our results indicated metallic transitions when the rotation approached 8° with respect to each other laminates for most of the two-dimensional systems that were analyzed.

Single-Step Exfoliation and Covalent Functionalization of MoS2 Nanosheets by an Organosulfur Reaction.

A simple approach to exfoliate and functionalize MoS2 in a single-step is described, which combines the dispersion of MoS2 in polybutadiene solution and ultrasonication processes. The great advantage of this process is that a colloidal stability of MoS2 in nonpolar solvent is achieved by chemically bonding polybutadiene on the perimeter edge sites of MoS2 sheets. In addition, elastomeric nanocomposite has been prepared with singular mechanical properties using functionalized MoS2 as nanofiller in a polybutadiene matrix with a subsequent vulcanization reaction.

How to find an optimum cluster size through topological site properties: MoSx model clusters.

Computational investigations in catalysis frequently use model clusters to represent realistically the catalyst and its reaction sites. Detailed knowledge of the molecular charge, thus electronic density, of a cluster would then allow physical and chemical insights of properties and can provide a procedure to establish their optimum size for catalyst studies. For this purpose, an approach is suggested to study model clusters based on the distributed multipole analysis (DMA) of molecular charge properties. After full density functional theory (DFT) geometry optimization of each cluster, DMA computed from the converged DFT one-electron density matrix allowed the partition of the corresponding cluster charge distribution into monopole, dipole, and quadrupole moments on the atomic sites. The procedure was applied to MoS2 model clusters Mo10S18, Mo12S26, Mo16S32, Mo23S48, and Mo27S54. This analysis provided detailed features of the charge distribution of each cluster, focused on the 1010 (Mo or metallic edge) and 1010 (sulfur edge) active planes. Properties of the Mo27S54 cluster, including the formation of HDS active surfaces, were extensively discussed. The effect of cluster size on the site charge distribution properties of both planes was evaluated. The results showed that the Mo16S32 cluster can adequately model both active planes of real size Mo27S54. These results can guide future computational studies of MoS2 catalytic processes. Furthermore, this approach is of general applicability.