Comparative Fitting of Mathematical Models to Carvedilol Release Profiles Obtained from Hypromellose Matrix Tablets.

The mathematical models available in DDSolver were applied to experimental dissolution data obtained by analysing carvedilol release from hypromellose (HPMC)-based matrix tablets. Different carvedilol release profiles were generated by varying a comprehensive selection of fillers and carvedilol release modifiers in the formulation. Model fitting was conducted for the entire relevant dissolution data, as determined by using a paired t-test, and independently for dissolution data up to approximately 60% of carvedilol released. The best models were selected based on the residual sum of squares (RSS) results used as a general measure of goodness of fit, along with the utilization of various criteria for visual assessment of model fit and determination of the acceptability of estimated model parameters indicating burst release or lag time concerning experimental dissolution results and previous research. In addition, a model-dependent analysis of carvedilol release mechanisms was carried out.

Application of Tablet in Tablet technique to design and characterize immediate and modified release tablets of Timolol maleate.

Hypertension is one of the major causes of mortality in the world. The non-selective -ß-blocker which includes Timolol maleate (TM) is usually used in hypertension, at a given dose of 10-40 mg. The present research aims to design a tablet-in-tablet (TIT) formulation as a single-unit dosage form to achieve modified and rapid drug release. Wet granulation was used to create the inner core modified release tablet utilising the release modifying agent's Sodium alginate (SA) and Hydroxypropyl methylcellulose (HPMC K4M). The impact of independent factors, SA and HPMC K4M, in different percentages of w/w, which affect the in vitro drug release and swelling index, was investigated using a 32 complete factorial design. The TM outer instant-release shell, which was made using croscarmellose sodium and Microcrystalline cellulose (MCC) in three distinct sizes, was press-coated onto the optimised inner core tablet. The core and outer shell tablets are within acceptable ranges for several physicochemical properties. No indication of interactions between drugs, polymers, and excipients was found in the Fourier transform infrared (FTIR) and Differential scanning calorimetry (DSC) investigations. The inner core tablet's formulation F6 achieves a 96.38% in vitro drug release at 24 h and a swelling index of 52.7%. The TIT-2 was, however, considered as the final tablet-in-tablet formulation because contains fewer excipients and shorter disintegration time than TIT-3.

Real-world evidence on the effectiveness and safety of gliclazide MR 60 mg in Bangladeshi patients with Type II diabetes during fasting: a sub-analysis from the global DIA-RAMADAN study.

Aim: Many Muslims with Type II diabetes (T2DM) fast during Ramadan, which can put them at increased risk of hypoglycemia. This sub-analysis of the global DIA-RAMADAN study assessed the effectiveness and safety of gliclazide modified release (MR) 60 mg in the Bangladeshi cohort. Materials & methods: DIA-RAMADAN was an international, prospective, observational study conducted in adult T2DM patients intending to fast and receiving gliclazide MR 60 mg once daily for ≥90 days before Ramadan. Dosing was switched from morning to evening at the start of Ramadan. The primary outcome was the proportion of patients with ≥1 symptomatic hypoglycemic event. Secondary outcomes included changes between inclusion (V0) and end of study visit (V1) in glycated hemoglobin (HbA1c), body weight and fasting plasma glucose (FPG). Results: Among the 98 Bangladeshi patients, 80 (81.6%) were at moderate/low-risk (category 3) for fasting and 18 (18.4%) were high-risk (category 2), as per International Diabetes Federation and Diabetes and Ramadan International Alliance (IDF-DAR) guidelines. Gliclazide MR was being prescribed as monotherapy to 59 (60.2%) patients and in combination with metformin to 39 (39.8%). There was no incidence of severe hypoglycemic events. Mean (±SD) HbA1c change from V0 was -0.1 ± 0.8% (p = 0.159). Mean (±SD) changes in FPG and body weight were -0.8 ± 39.7 mg/dl (p = 0.876) and -0.0 ± 1.5 kg (p = 0.810), respectively. Conclusion: In a real-world setting, this sub-analysis in Bangladeshi patients shows that patients with T2DM treated with gliclazide MR 60 mg can fast safely during Ramadan with a very low risk of hypoglycemia, while maintaining glycemic control and body weight.

Nano Lipid Carriers as a Promising Drug Delivery Carrier for Neurodegenerative Disorders - An Overview of Recent Advances.

The last few decades have seen a rise in the number of deaths caused by neurological disorders. The blood-brain barrier (BBB), which is very complex and has multiple mechanisms, makes drug delivery to the brain challenging for many scientists. Lipid nanoparticles (LNPs) such as nanoemulsions, solid-lipid nanoparticles, liposomes, and nano lipid carriers (NLCs) exhibit enhanced bioavailability and flexibility among these nanocarriers. NLCs are found to be very effective. In the last few decades, they have been a center of attraction for controlled drug delivery. According to the current global status of specific neurological disorders, out of all LNPs, NLC significantly reduces the cross-permeability of drugs through the BBB due to their peculiar properties. They offer a host of advantages over other carriers because of their biocompatibility, safety, non-toxicity, non-irritating behavior, stability, high encapsulation efficiency, high drug loading, high drug targeting, control of drug release, and ease in manufacturing. The biocompatible lipid matrix is ideally suited as a drug carrier system due to the nano-size range. For certain neurological conditions such as Parkinsonism, Alzheimer's, Epilepsy, Multiple sclerosis, and Brain cancer, we examined recent advances in NLCs to improve brain targeting of bioactive with special attention to formulation aspects and pharmacokinetic characteristics. This article also provides a brief overview of a critical approach for brain targeting, i.e., direct nose-to-brain drug delivery and some recent patents published on NLC".

Nanocomplexes film composed of gallic acid loaded ovalbumin/chitosan nanoparticles and pectin with excellent antibacterial activity: Preparation, characterization and application in coating preservation of salmon fillets.

Active packaging has been recognized as an effective approach to extend the shelf life of food, but the rapid release of active substances limits the preservation effect. In this study, gallic acid (GA)-loaded ovalbumin (OVA)/chitosan (CS) nanoparticles with slow-release properties were prepared and embedded into the pectin matrix to refine the rapid release of GA in the pectin and elongate the shelf life of salmon fillets. Our results showed that GA could be released continuously from the OVA/CS nanoparticles. The pectin film incorporated with GA-loaded OVA/CS nanoparticles exhibited good light barrier and mechanical properties. The opacity value of the film reached 1.65 ± 0.06 UA/mm, and the tensile strength and elongation at break were 15.97 ± 1.55 MPa and 7.29 ± 0.42 %, respectively. In addition, the pectin film combined with GA-loaded OVA/CS nanoparticles showed improved antibacterial activity against two common biogenic amine-producing bacteria (Morganella morganii and Escherichia coli). Moreover, the nanocomposite film delayed salmon fillets' biogenic amine generation, and the shelf life was extended by 3 days compared with the control group. These promising properties supported using the GA-loaded OVA/CS nanoparticle-pectin films as preservation materials for fish.

Retrospective analysis of the biopharmaceutics characteristics of solid oral Modified-Release drug products in approved US FDA NDAs designated as Extended-Release or Delayed-Release formulations.

BACKGROUND: Modified Release (MR) orally administered drugs products [Extended-Release (ER) and Delayed-Release (DR)] differ from Immediate-Release (IR) drug products in their drug release site and/or rate to offer therapeutic advantages. It is important to understand the biopharmaceutics factors that determine how a drug works in the gastrointestinal tract and the various pharmacokinetic properties that determine a drug's rate of absorption and release in the human body. To better understand the biopharmaceutics characteristics of ER and DR drug products, this study retrospectively analyzed submissions approved by the US Food and Drug Administration (FDA), from 2001 to 2021, and their corresponding review documents. This review work is expected to enhance the readers' understanding regarding the biopharmaceutics properties that supported approval of these products' ER claims, as per 21 CFR 320.25(f), and DR claims. METHODS: A comprehensive search was conducted using the FDA's internal New Drug Application (NDA) database for ER and DR oral drug products approved between 2001 and 2021. The search yielded 87 ER applications (23 ER capsules and 64 ER tablets) and 21 DR applications (10 DR capsules, 11 DR tablets) for which electronic records were accessible. These products were analyzed for overall drug product design, dosing frequency compared to the reference (if applicable), degree of fluctuation, dissolution method, and alcohol dose-dumping. RESULTS: Out of 87 total applications for ER drug products that were assessed, 62% of the ER tablets contained a polymer matrix formulation, and hypromellose (HPMC) was used in 50% of these products. 52% of the ER capsules consisted of polymer beads while about half of the DR drug products contained a non-bead formulation with a combination of polymers. The majority of ER drug products were found to have a reduction in dosing frequency and a decrease in the degree of fluctuation when compared to the IR reference product. The 13 ER drug products that exhibited an increase in degree of fluctuation exhibited general and pharmacodynamic benefits, such as reduced dosing frequency and reduced pill burden. The majority of DR formulations were developed to prevent drug degradation in the stomach, followed by to decrease potential stomach irritation, and lastly for localized release in the colon. The majority of ER drug products had 1:1 ratios of dissolution duration compared to dosing frequency (i.e., the majority of ER drug products had a dissolution duration of 24 h and were dosed every 24 h while those with a dissolution duration of 12 h were dosed every 12 h). The majority of ER applications had single-stage dissolution methods while most DR drug products used biphasic dissolution methods. All of the DR dissolution methods incorporated an acid stage of 2 h and a buffer stage with various timeframes. 53% the DR drug products had a ratio of dissolution duration to dosing frequency of 1:4 (e.g. a dissolution duration of 2 h to a dosing frequency of 8 h) or 1:8 (e.g. a dissolution duration of 2 h to a dosing frequency of 16 h). Of the ER tablets and DR drug products, 72% exhibited no alcohol dose-dumping under in vitro testing conditions. ER capsules, however, did not yield similar results-most of which exhibited alcohol induced dose-dumping. Alcohol dose dumping was mitigated by either in vivo studies or warnings on the drug product label. CONCLUSION: The results of this study help the reader understand the design, characteristics, and pharmacological advantages of the ER and DR drug products for patient benefit; as well as the regulations governing the FDA's assessment of ER claims.

Tri-Layer Core-Shell Fibers from Coaxial Electrospinning for a Modified Release of Metronidazole.

Polymers are the backbone of drug delivery. Electrospinning has greatly enriched the strategies that have been explored for developing novel drug delivery systems using polymers during the past two decades. In this study, four different kinds of polymers, i.e., the water-soluble polymer poly (vinyl alcohol) (PVA), the insoluble polymer poly(ε-caprolactone) (PCL), the insoluble polymer Eudragit RL100 (ERL100) and the pH-sensitive polymer Eudragit S100 (ES100) were successfully converted into types of tri-layer tri-polymer core-shell fibers through bi-fluid coaxial electrospinning. During the coaxial process, the model drug metronidazole (MTD) was loaded into the shell working fluid, which was an emulsion. The micro-formation mechanism of the tri-layer core-shell fibers from the coaxial emulsion electrospinning was proposed. Scanning electron microscope and transmission electron microscope evaluations verified the linear morphology of the resultant fibers and their obvious tri-layer multiple-chamber structures. X-ray diffraction and Fourier transform infrared spectroscopy measurements demonstrated that the drug MTD presented in the fibers in an amorphous state and was compatible with the three polymeric matrices. In vitro dissolution tests verified that the three kinds of polymer could act in a synergistic manner for a prolonged sustained-release profile of MTD in the gut. The drug controlled-release mechanisms were suggested in detail. The protocols reported here pioneer a new route for creating a tri-layer core-shell structure from both aqueous and organic solvents, and a new strategy for developing advanced drug delivery systems with sophisticated drug controlled-release profiles.

Evaluating the Release of Different Commercial Orally Modified Niacin Formulations In Vitro.

OBJECTIVES: To evaluate the release profile of different modified-release oral formulations of niacin, such as immediate-release (IR) powder and tablets, timed-release (TR) caplets, extended-release (ER) capsules, and controlled-release (CR) tablets, to assure their defined release pattern and correlate this release with their matrix polymers. SIGNIFICANCE: Niacin is used to manage hyperlipidemia by reducing cutaneous flushing and hepatotoxicity adverse events. The release profiles of different types of modified-release dosage forms depend on the types of coating materials (polymers) used in the matrix formation. Although different types of niacin formulations exist, none of the niacin dissolution profiles have been evaluated and compared in the literature. METHODS: Four commercial orally modified-release niacin brands were collected from a local CVS pharmacy retail store, in Miami, FL, USA. The in vitro release study was conducted in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) conditions. RESULTS: The results of the release patterns of four niacin-modified dosage forms (IR, ER, TR, and CR) were aligned with their release definitions. However, the CR dosage form did not follow an ideal release pattern. CONCLUSIONS: The release rate of niacin in vitro was pH dependent, which was confirmed by the similarity factor (f2) results. All the f2 comparison values were below 50 in both the SIF and SGF media, while all the comparisons were below the f2 values for all brands in the SIF media.

Risks and benefits of oral modified-release compared with oral immediate-release opioid use after surgery: a systematic review and meta-analysis.

Prescription of modified-release opioids for acute postoperative pain is widespread despite evidence to show their use may be associated with an increased risk of adverse effects. This systematic review and meta-analysis aimed to examine the available evidence on the safety and efficacy of modified-release, compared with immediate-release, oral opioids for postoperative pain in adults. We searched five electronic databases from 1 January 2003 to 1 January 2023. Published randomised clinical trials and observational studies on adults who underwent surgery which compared those who received oral modified-release opioids postoperatively with those receiving oral immediate-release opioids were included. Two reviewers independently extracted data on the primary outcomes of safety (incidence of adverse events) and efficacy (pain intensity, analgesic and opioid use, and physical function) and secondary outcomes (length of hospital stay, hospital readmission, psychological function, costs, and quality of life) up to 12 months postoperatively. Of the eight articles included, five were randomised clinical trials and three were observational studies. The overall quality of evidence was low. Modified-release opioid use was associated with a higher incidence of adverse events (n = 645, odds ratio (95%CI) 2.76 (1.52-5.04)) and worse pain (n = 550, standardised mean difference (95%CI) 0.2 (0.04-0.37)) compared with immediate-release opioid use following surgery. Our narrative synthesis concluded that modified-release opioids showed no superiority over immediate-release opioids for analgesic consumption, length of hospital stay, hospital readmissions or physical function after surgery. One study showed that modified-release opioid use is associated with higher rates of persistent postoperative opioid use compared with immediate-release opioid use. None of the included studies reported on psychological function, costs or quality of life.

Impact of modified-release opioid use on clinical outcomes following total hip and knee arthroplasty: a propensity score-matched cohort study.

Modified-release opioids are often prescribed for the management of moderate to severe acute pain following total hip and knee arthroplasty, despite recommendations against their use due to increasing concerns regarding harm. The primary objective of this multicentre study was to examine the impact of modified-release opioid use on the incidence of opioid-related adverse events compared with immediate-release opioid use, among adult inpatients following total hip or knee arthroplasty. Data for total hip and knee arthroplasty inpatients receiving an opioid analgesic for postoperative analgesia during hospitalisation were collected from electronic medical records of three tertiary metropolitan hospitals in Australia. The primary outcome was the incidence of opioid-related adverse events during hospital admission. Patients who received modified with or without immediate-release opioids were matched to those receiving immediate-release opioids only (1:1) using nearest neighbour propensity score matching with patient and clinical characteristics as covariates. This included total opioid dose received. In the matched cohorts, patients given modified-release opioids (n = 347) experienced a higher incidence of opioid-related adverse events overall, compared with those given immediate-release opioids only (20.5%, 71/347 vs. 12.7%, 44/347; difference in proportions 7.8% [95%CI 2.3-13.3%]). Modified-release opioid use was associated with an increased risk of harm when used for acute pain during hospitalisation after total hip or knee arthroplasty.

Preparation of Sustained Release Formulation of Verapamil Hydrochloride Using Ion Exchange Resins.

The purpose of this investigation was to formulate and evaluate the interaction between cation exchange resins and verapamil hydrochloride. The uptake studies were conducted using the rotating bottle apparatus. The Langmuir-like equation was applied to the experimental data and the maximum drug loading was determined from the Langmuir-like parameters. The drug-resin complexes were evaluated using XRD, SEM, and particle size analysis. Release studies were performed using USP dissolution apparatus 2. The resin with the lowest percentage of cross-linking had the highest uptake capacity. The percent increase in particle size due to complexation was found to be associated with drug loading; the highest drug loading had the highest increase in particle size. The X-ray diffraction patterns of the resins and the drug-resin complexes showed that they were both amorphous. The maximum drug release was approximately 40% when conventional dissolution testing was used. Results showed that sink conditions could not be maintained using conventional dissolution methods. Maximum drug release increased dramatically by increasing the volume of samples withdrawn and fresh dissolution medium added. Excellent correlation was obtained between sample volume and drug release rate with an R-value of 0.988. Particle diffusion-controlled model and film diffusion-controlled model were both applied to the experimental data. The results indicated that the rate-limiting step is the diffusion of the exchanging cations through the liquid film. The modified release formulation was prepared successfully and correlated very well with the USP monograph for verapamil hydrochloride extended release capsules.

Comparative Study of Selected Excipients' Influence on Carvedilol Release from Hypromellose Matrix Tablets.

Solid dosage forms based on hypromellose (HPMC) with prolonged/extended drug release are very important from the research and industrial viewpoint. In the present research, the influence of selected excipients on carvedilol release performance from HPMC-based matrix tablets was studied. A comprehensive group of selected excipients was used within the same experimental setup, including different grades of excipients. Compression mixtures were directly compressed using constant compression speed and main compression force. LOESS modelling was used for a detailed comparison of carvedilol release profiles via estimating burst release, lag time, and times at which a certain % of carvedilol was released from the tablets. The overall similarity between obtained carvedilol release profiles was estimated using the bootstrapped similarity factor (f2). In the group of water-soluble carvedilol release modifying excipients, which produced relatively fast carvedilol release profiles, POLYOXᵀᴹ WSR N-80 and Polyglykol® 8000 P demonstrated the best carvedilol release control, and in the group of water-insoluble carvedilol release modifying excipients, which produced relatively slow carvedilol release profiles, AVICEL® PH-102 and AVICEL® PH-200 performed best.

Short and mid-term effects of modified release technique in rheumatic mitral valve repair.

OBJECTIVE: Repair or replacement remains debatable in rheumatic heart disease. To regain optimal mean transvalvular pressure gradients and end-diastolic peak flow velocity, the modified release technique combined peeling in the anterior leaflet and separated the shortened chordal. In the end, the short and mid-term outcomes of the modified release technique were evaluated. METHODS: We retrospectively analyzed a series of 128 patients with rheumatic mitral stenosis, from January 2018 to July 2021 in our center. All patients undergoing mitral valve repair were using the modified release technique. The effect of mitral valve repair was evaluated by intraoperative transesophageal echocardiography and postoperative transthoracic echocardiography. RESULTS: All the 128 patients successfully repaired the mitral valve. The intraoperative transesophageal echocardiography showed trivial or mild regurgitation. The aortic valve was repaired without obvious regurgitation in 12 cases, 5 cases received an aortic valve replacement, 89 cases underwent tricuspid annuloplasty. There were no blood transfusions in most patients, no deaths nor complications during peri-operation, also, no deaths and adverse events were observed during the follow-up period from 3 to 42 months. During the follow-up, 122 cases had no mitral valve regurgitation and 2 cases of moderate regurgitation, 4 cases of mild to moderate regurgitation. The mean peak flow velocity was 1.2 ± 0.3 m / s, no new-onset stenosis occurred. CONCLUSION: Modified release technique is safe and feasible. Its durability is acceptable in the short and mid-term, with no new-onset stenosis during the follow-up.

Use of In Vitro Dynamic Colon Model (DCM) to Inform a Physiologically Based Biopharmaceutic Model (PBBM) to Predict the In Vivo Performance of a Modified-Release Formulation of Theophylline.

A physiologically based biopharmaceutic model (PBBM) of a modified-release formulation of theophylline (Uniphyllin Continus® 200 mg tablet) was developed and implemented to predict the pharmacokinetic (PK) data of healthy male volunteers by integrating dissolution profiles measured in a biorelevant in vitro model: the Dynamic Colon Model (DCM). The superiority of the DCM over the United States Pharmacopeia (USP) Apparatus II (USP II) was demonstrated by the superior predictions for the 200 mg tablet (average absolute fold error (AAFE): 1.1-1.3 (DCM) vs. 1.3-1.5 (USP II). The best predictions were obtained using the three motility patterns (antegrade and retrograde propagating waves, baseline) in the DCM, which produced similar PK profiles. However, extensive erosion of the tablet occurred at all agitation speeds used in USP II (25, 50 and 100 rpm), resulting in an increased drug release rate in vitro and overpredicted PK data. The PK data of the Uniphyllin Continus® 400 mg tablet could not be predicted with the same accuracy using dissolution profiles from the DCM, which might be explained by differences in upper gastrointestinal (GI) tract residence times between the 200 and 400 mg tablets. Thus, it is recommended that the DCM be used for dosage forms in which the main release phenomena take place in the distal GI tract. However, the DCM again showed a better performance based on the overall AAFE compared to the USP II. Regional dissolution profiles within the DCM cannot currently be integrated into Simcyp®, which might limit the predictivity of the DCM. Thus, further compartmentalization of the colon within PBBM platforms is required to account for observed intra-regional differences in drug distribution.

Formulation and Biopharmaceutical Evaluation of Capsules Containing Freeze-Dried Cranberry Fruit Powder.

Cranberry fruits are an important source of anthocyanins and anthocyanidins. The aim of the present study was to investigate the effect of excipients on the solubility of cranberry anthocyanins and their dissolution kinetics as well as on the disintegration time of the capsules. Selected excipients (sodium carboxymethyl cellulose, beta-cyclodextrin and chitosan) were found to affect the solubility and release kinetics of anthocyanins in freeze-dried cranberry powder. Capsule formulations N1-N9 had a disintegration time of less than 10 min, and capsule formulation N10 containing 0.200 g of freeze-dried cranberry powder, 0.100 g of Prosolv (combination of microcrystalline cellulose and colloidal silicon dioxide), and 0.100 g of chitosan had a capsule disintegration time of over 30 min. The total amount of anthocyanins released into the acceptor medium ranged from 1.26 ± 0.06 mg to 1.56 ± 0.03 mg. Capsule dissolution test data showed that the time to release into the acceptor medium was statistically significantly longer for the chitosan-containing capsule formulations compared to the control capsules (p < 0.05). Freeze-dried cranberry fruit powder is a potential source of anthocyanin-rich dietary supplements, and the choice of excipient chitosan could be a suitable solution in capsule formulations providing greater anthocyanin stability and modified release in the gastrointestinal tract.

Virtual Clinical Trials Guided Design of an Age-Appropriate Formulation and Dosing Strategy of Nifedipine for Paediatric Use.

The rapid onset of action of nifedipine causes a precipitous reduction in blood pressure leading to adverse effects associated with reflex sympathetic nervous system (SNS) activation, including tachycardia and worsening myocardial and cerebrovascular ischemia. As a result, short acting nifedipine preparations are not recommended. However, importantly, there are no modified release preparations of nifedipine authorised for paediatric use, and hence a paucity of clinical studies reporting pharmacokinetics data in paediatrics. Pharmacokinetic parameters may differ significantly between children and adults due to anatomical and physiological differences, often resulting in sub therapeutic and/or toxic plasma concentrations of medication. However, in the field of paediatric pharmacokinetics, the use of pharmacokinetic modelling, particularly physiological-based pharmacokinetics (PBPK), has revolutionised the ability to extrapolate drug pharmacokinetics across age groups, allowing for pragmatic determination of paediatric plasma concentrations to support drug licensing and clinical dosing. In order to pragmatically assess the translation of resultant dissolution profiles to the paediatric populations, virtual clinical trials simulations were conducted. In the context of formulation development, the use of PBPK modelling allowed the determination of optimised formulations that achieved plasma concentrations within the target therapeutic window throughout the dosing strategy. A 5 mg sustained release mini-tablet was successfully developed with the duration of release extending over 24 h and an informed optimised dosing strategy of 450 µg/kg twice daily. The resulting formulation provides flexible dosing opportunities, improves patient adherence by reducing frequent administration burden and enhances patient safety profiles by maintaining efficacious levels of consistent drug plasma levels over a sustained period of time.

Effects of the therapy shift from cortisone acetate to modified-release hydrocortisone in a group of patients with adrenal insufficiency.

Objective: Patients with adrenal insufficiency (AI) may be exposed to supraphysiological glucocorticoids levels during standard treatment with cortisone acetate (CA) or immediate-release hydrocortisone (IR-HC). Recent studies, predominantly including patients in IR-HC treatment, suggested that modified-release hydrocortisone (MRH) provide a more physiological cortisol rhythm, improving metabolic control and quality of life. Our primary aim was to assess clinical and biochemical modifications in patients shifted from CA to MRH. Design/Methods: We designed a retrospective longitudinal study, enrolling 45 AI patients (22 primary and 23 secondary AI) treated exclusively with CA thrice daily, shifted to MRH once daily; 29/45 patients concluded at least 18-months follow-up (MRH-group). We recruited 35 AI patients continuing CA as a control group (CA-group). Biochemical and clinical data, including metabolic parameters, bone quality, and symptoms of under- or overtreatment were collected. In 24 patients, a daily salivary cortisol curve (SCC) performed before and one month after shifting to MRH was compared to healthy subjects (HS). Results: No significant changes in glycometabolic and bone parameters were observed both in MRH and CA-groups during a median follow-up of 35 months. A more frequent decrease in blood pressure values (23.1% vs 2.8%, p=0.04) and improvement of under- or overtreatment symptoms were observed in MRH vs CA-group. The SCC showed a significant steroid overexposure in both CA and MRH-groups compared to HS [AUC (area under the curve) = 74.4 ± 38.1 nmol×hr/L and 94.6 ± 62.5 nmol×hr/L respectively, vs 44.1 ± 8.4 nmol×hr/L, p<0.01 for both comparisons], although SCC profile was more similar to HS in MRH-group. Conclusions: In our experience, patients shifted from CA to equivalent doses of MRH do not show significant glycometabolic modifications but blood pressure control and symptoms of over-or undertreatment may improve. The lack of amelioration in glucose metabolism and total cortisol daily exposure could suggest the need for a dose reduction when shifting from CA to MRH, due to their different pharmacokinetics.

Congenital adrenal hyperplasia: New biomarkers and adult treatments.

Congenital adrenal hyperplasia (CAH) is a genetic disease caused by an enzyme deficiency interrupting adrenal steroidogenesis. It most frequently involves 21-hydroxylase, which induces adrenal insufficiency with hyperandrogenism. Restoring hormonal balance is difficult with glucocorticoids, which are the gold-standard treatment. Strict normalization of conventional biomarkers (17-hydroxyprogesterone and delta-4 androstenedione) is often obtained at the cost of iatrogenic hypercortisolism. Optimizing the management of these patients first involves using more specific biomarkers of adrenal steroidogenesis in difficult situations, and secondly using therapeutics targeting the induced hypothalamic-pituitary-adrenal axis disorder. 11-oxygenated androgens are candidates for biochemical monitoring of Congenital adrenal hyperplasia (CAH), in particular 11-ketotestosterone. Numerous new therapeutic agents are currently being explored, the prime goal being to reduce glucocorticoid exposure, as no strategy can fully replace it at present. They can be divided into 3 categories. The first includes "more physiological" hydrocortisone administration (modified-release hydrocortisone and continuous subcutaneous infusion of hydrocortisone hemisuccinate); the second includes corticotropin releasing hormone (CRH) and adrenocorticotropic hormone (ACTH) receptor antagonists and anti-ACTH antibodies; and the third includes steroidogenesis inhibitors. Finally, experiments on gene and cell therapies suggest the possibility of lasting remission or even cure in the future.

Dissolvable microneedles for transdermal drug delivery showing skin pentation and modified drug release.

Topical therapies for chronic skin diseases suffer from a low patient compliance due to the inconvenient treatment regimens of available products. Dissolvable microneedles (MN) with modified release offer an interesting possibility to increase the compliance by acting as a depot in the skin and thereby decreasing the dosing frequency. Furthermore, the bioavailability can be increased significantly by bypassing the barrier of the skin by the direct penetration of the MN into the skin. In this study the depot effect and skin penetration of an innovative dissolvable MN patch was assessed by insertion in ex vivo human skin and in vivo using minipigs. The MN patches are based on biodegradable polymers and the active pharmaceutical ingredients calcipotriol (Calci) and betamethasone-17-21-dipropionate (BDP) used to treat psoriasis. Using computed tomography (CT) and Coherent anti-Stokes Raman scattering (CARS) microscopy it was possible to visualize the skin penetration and follow the morphology of the MN as function of time in the skin. The depot effect was assessed by studying the modified in vitro release in an aqueous buffer and by comparing the drug release of a single application of a patch both ex vivo and in vivo to daily application of a marketed oleogel containing the same active pharmaceutical ingredients. The CT and CARS images showed efficient penetration of the MN patches into the upper dermis and a slow swelling process of the drug containing tip over a period of 8 days. Furthermore, CARS demonstrated that it can be used as a noninvasive technique with potential applicability in clinical settings. The in vitro release studies show a release of 54% over a time period of 30 days. The pharmacological relevance of MNs was confirmed in human skin explants and in vivo after single application and showed a similar response on calcipotriol and BDP mediated signaling events compared to daily application of the active oleogel. Altogether it was demonstrated that the MN can penetrate the skin and have the potential to provide a depot effect.

Ethanol-induced dose dumping from sodium alginate matrix tablets: Investigation of the effects of medium viscosity and pH.

In this work, the swelling and disintegration of drug-free sodium alginate (SA) compacts and the release of metformin HCl from SA matrix tablets were investigated in acidic media of different ethanol concentrations (0, 10, 20, and 40 % v/v), pH (1.2 and 4.5) and HPMC K4M concentrations (0-1 % w/v). The investigated dissolution media represented the consumption of different alcoholic beverages, the pH of fasted and fed states, and a range of viscosity resembling diluted homogenized FDA meal. The dissolution efficiency and the time to 50 % release (t50%) were selected as release parameters. It was found that both ethanol concentration and medium pH affected drug release from SA matrix tablets and the swelling of SA compacts. Dose dumping occurred at high ethanol concentration (40 %) at both media pH with almost complete drug release within 15-30 min associated with rapid matrix disintegration. HPMC at 0.5-1 % concentrations increased the medium's viscosity, preventing dose dumping at high ethanol concentrations. Erosion and disintegration of SA compacts were decelerated by increasing HPMC concentration in hydroethanolic media in consonance with decreased release rate from matrix tablets. ANOVA tests showed significant effects of pH and concentrations of ethanol and HPMC in the dissolution medium on the release parameters.