RESUMO
Nano-biocomposite hydrogel samples were produced using graphene oxide (GO) and agar and applied as adsorbents of organic components in water. The hydrogels were prepared by varying the wt% of Agar and GO. The samples were characterized, and batch adsorption experiments evaluated the effect of initial pH, equilibrium isotherms, and kinetics for the adsorption of the anionic dye Acid Orange 7 (AO) and the cationic dyes Nile Blue A (NB) and methylene blue (MB) in an aqueous medium. Overall, both hydrogel samples exhibited satisfactory results for removing NB and MB; however, there was no effective removal for the anionic dye AO. Adsorption equilibrium isotherms were obtained, and Freundlich, Langmuir, and Sips models were fitted to the experimental equilibrium data; moreover, kinetic data were adjusted to driving force models and particle mass balance. The maximum experimental adsorption capacities, 141.48 mg·g-1 (MB) and 284.69 mg·g-1 (NB), were obtained, on a dry basis, for the sample produced with 70 wt% of agar and 30 wt% of GO. Both hydrogels exhibited remarkable regenerative potential for NB and MB, with the adsorption capacity remaining constant, even after five adsorption/desorption cycles.
RESUMO
In this work, an agar-graphene oxide hydrogel was prepared to adsorb Cd (II) and Methyl Violet (MV) from water. The hydrogel was synthesised and characterised through SEM and EDS. Kinetic, equilibrium and regeneration studies were carried out, in which Langmuir, Freundlich and Sips isotherm models were fitted to the equilibrium experimental data; and regarding the kinetics, studies were conducted by modelling experimental data considering both empirical and phenomenological models. SEM and EDS have shown the composite present a 3D-disordered porous microstructure and that it is mainly constituted of C and O. Sips model fitted well to Cd (II) (R2 = 0.968 and χ2 = 0.176) and MV (R2 = 0.993 and χ2 = 0.783). The qmax values for MV and Cd (II) were 76.65 and 11.70â mg.g-1, respectively. Pseudo-order models satisfactorily described Cd (II) and MV adsorption kinetics with R2 > 0.90. Regeneration experiments revealed an outstanding reuse capacity of the adsorbent after three cycles of adsorption-desorption for both Cd (II) and MV. This study evidences the possibility of a feasible adsorbent for Cd (II) and MV removal from water for successive cycles of use.
RESUMO
A label-free nanoimmunosensor is reported based on p53/CeO2/PEDOT nanobiocomposite-decorated screen-printed gold electrodes (SPAuE) for the electrochemical detection of anti-p53 autoantibodies. CeO2 nanoparticles (NPs) were synthesized and stabilized with cyanopropyltriethoxysilane by a soft chemistry method. The nanoimmunosensing architecture was prepared by in situ electropolymerization of 3,4-ethylenedioxythiophene (EDOT) on SPAuE in the presence of CeO2 NPs. The CeO2 NPs and Ce/PEDOT/SPAuE were characterized by scanning and transmission electron microscopy, dynamic and electrophoretic light scattering, ultraviolet-visible spectrophotometry, X-ray diffraction, Fourier-transform infrared spectroscopy, cyclic voltammetry, and electrochemical impedance spectroscopy. Ce/PEDOT/SPAuE was biofunctionalized with p53 antigen by covalent bonding for the label-free determination of anti-p53 autoantibodies by differential pulse voltammetry. The nanobiocomposite-based nanoimmunosensor detected anti-p53 autoantibodies in a linear range from 10 to 1000 pg mL-1, with a limit of detection (LOD) of 3.2 pg mL-1. The nanoimmunosensor offered high specificity, selectivity, and long-term storage stability with great potential to detect anti-p53 autoantibodies in serum samples. Overall, incorporating organo-functional nanoparticles into polymeric matrices can provide a simple-to-assemble, rapid, and ultrasensitive approach for on-site screening of anti-p53 autoantibodies and other disease-related biomarkers with low sample volumes.