A machine vision tool for multi-color H2O2 sensing by MoOx nanoparticles with oxygen vacancies.

Improving the ease of operation and portability of hydrogen peroxide (H2O2) detection in daily production and life holds significant application value. However, it remains a challenge to achieve rapid colorimetric detection of H2O2 and color change quantification. In this study, we achieved rapid and visual detection of H2O2 by MoOx (2 ≤ x ≤ 3) nanoparticles with rich oxygen vacancies using machine vision. As the concentration of H2O2 increases, the detection system exhibited a visible multi-color change from blue to green and then yellow and the absorption peak near 680 nm measured by the UV-visible spectrophotometer gradually decreased. With excellent sensitivity, a wide linear range of 0.1-600 µmol/L, concentrations as low as 0.1 µmol/L can be detected with good selectivity towards H2O2. The sensing mechanism of detecting H2O2 by the change of oxygen vacancies in MoOx was revealed through characterization methods such as XPS, EPR, and DFT. In addition, the Hue, Saturation, Value (HSV) visual analysis system based on MoOx was constructed to assist in the rapid, portable, and sensitive monitoring of H2O2 in practical application scenarios. This work offers an easy-to operate, low cost, and convenience for achieving rapid colorimetric determination of H2O2 and has broad application prospects in daily life and industrial production.

Thermoelectric bismuth telluride nanostructures fabricated by electrodeposition within flexible templates.

Bismuth telluride, a highly efficient thermoelectric material, stands out for applications around room temperature in wearable devices. By harnessing the thermal gradient established between the human body and ambient temperature, we can generate useable electricity. Notably, bismuth telluride nanostructures exhibit significantly lower thermal conductivities compared to their bulk counterparts. As a result, the thermoelectric efficiency achieved is notably higher. Our research focuses on developing efficient nanostructured materials based on bismuth telluride inside a flexible substrate made of polyester. We employ scalable methods, such as template-assisted electrochemical deposition, to fabricate these nanostructures. In this study, we present an approach to the development of flexible nanostructured thermoelectric materials. Despite using a reduced quantity of active material, our electrochemically deposited nanostructures inside a flexible template demonstrate a remarkable performance. They exhibit 24 % of the Power Factor reported for conventional electrochemically fabricated Bi2Te3 thin films, and notably, they even surpass the Power Factor reported for flexible Bi2Te3-based inks used in the creation of flexible generators. This achievement underscores the potential of our method in the advancement of efficient, flexible thermoelectric devices.

Direct electron beam writing of silver using a ß-diketonate precursor: first insights.

Direct electron beam writing is a powerful tool for fabricating complex nanostructures in a single step. The electron beam locally cleaves the molecules of an adsorbed gaseous precursor to form a deposit, similar to 3D printing but without the need for a resist or development step. Here, we employ for the first time a silver ß-diketonate precursor for focused electron beam-induced deposition (FEBID). The used compound (hfac)AgPMe3 operates at an evaporation temperature of 70-80 °C and is compatible with commercially available gas injection systems used in any standard scanning electron microscope. Growth of smooth 3D geometries could be demonstrated for tightly focused electron beams, albeit with low silver content in the deposit volume. The electron beam-induced deposition proved sensitive to the irradiation conditions, leading to varying compositions of the deposit and internal inhomogeneities such as the formation of a layered structure consisting of a pure silver layer at the interface to the substrate covered by a deposit layer with low silver content. Imaging after the deposition process revealed morphological changes such as the growth of silver particles on the surface. While these effects complicate the application for 3D printing, the unique deposit structure with a thin, compact silver film beneath the deposit body is interesting from a fundamental point of view and may offer additional opportunities for applications.

Wafer-Scale Replication of Plasmonic Nanostructures via Microbubbles for Nanophotonics.

Quasi-3D plasmonic nanostructures are in high demand for their ability to manipulate and enhance light-matter interactions at subwavelength scales, making them promising building blocks for diverse nanophotonic devices. Despite their potential, the integration of these nanostructures with optical sensors and imaging systems on a large scale poses challenges. Here, a robust technique for the rapid, scalable, and seamless replication of quasi-3D plasmonic nanostructures is presented straight from their production wafers using a microbubble process. This approach not only simplifies the integration of quasi-3D plasmonic nanostructures into a wide range of standard and custom optical imaging devices and sensors but also significantly enhances their imaging and sensing performance beyond the limits of conventional methods. This study encompasses experimental, computational, and theoretical investigations, and it fully elucidates the operational mechanism. Additionally, it explores a versatile set of options for outfitting nanophotonic devices with custom-designed plasmonic nanostructures, thereby fulfilling specific operational criteria.

Self-Driven Graphene Photodetector Arrays Enabled by Plasmon-Induced Asymmetric Electric Field.

Gap surface plasmon (GSP) modes enhance graphene photodetectors (GPDs)' performance by confining the incident light within nanogaps, giving rise to strong light absorption. Here, we propose an asymmetric plasmonic nanostructure array on planar graphene comprising stripe- and triangle-shaped sharp tip arrays. Upon light excitation, the noncentrosymmetric metallic nanostructures show strong light-matter interactions with localized field close to the surface of tips, causing an asymmetric electric field. These features can accelerate the hot electron generation in graphene, forming a directional diffusion current. Accordingly, the artificial GPDs exhibit a wavelength-dependence behavior covering the wavelength range from 0.8 to 1.6 µm, with three photoresponse maxima corresponding to the nanostructures' resonances. Additionally, the polarization-dependent GPDs can realize a responsivity of ∼25 mA/W and a noise equivalent power of ∼0.44 nW/Hz1/2 at zero bias when excited at the resonance of 1.4 µm. Overall, our study offers a new strategy for preparing compact and multifrequency infrared GPDs.

Regulating the Electrochemical Nitrate Reduction Performance with Controllable Distribution of Unconventional Phase Copper on Alloy Nanostructures.

Electrochemical nitrate reduction reaction (NO3RR) is emerging as a promising strategy for nitrate removal and ammonia (NH3) production using renewable electricity. Although great progresses have been achieved, the crystal phase effect of electrocatalysts on NO3RR remains rarely explored. Here, the epitaxial growth of unconventional 2H Cu on hexagonal close-packed (hcp) IrNi template, resulting in the formation of three IrNiCu@Cu nanostructures, is reported. IrNiCu@Cu-20 shows superior catalytic performance, with NH3 Faradaic efficiency (FE) of 86% at -0.1 (vs reversible hydrogen electrode [RHE]) and NH3 yield rate of 687.3 mmol gCu -1 h-1, far better than common face-centered cubic Cu. In sharp contrast, IrNiCu@Cu-30 and IrNiCu@Cu-50 covered by hcp Cu shell display high selectivity toward nitrite (NO2 -), with NO2 - FE above 60% at 0.1 (vs RHE). Theoretical calculations have demonstrated that the IrNiCu@Cu-20 has the optimal electronic structures for NO3RR due to the highest d-band center and strongest reaction trend with the lowest energy barriers. The high electroactivity of IrNiCu@Cu-20 originates from the abundant low coordination of Cu sites on the surface, which guarantees the fast electron transfer to accelerate the intermediate conversions. This work provides a feasible tactic to regulate the product distribution of NO3RR by crystal phase engineering of electrocatalysts.

Robust Chiral Metal-Organic Framework Coatings for Self-Activating and Sustainable Biofouling Mitigation.

Surface coatings are designed to mitigate pervasive biofouling herald, a new era of surface protection in complex biological environments. However, existing strategies are plagued by persistent and recurrent biofilm attachment, despite the use of bactericidal agents. Herein, a chiral metal-organic framework (MOF)-based coating with conformal microstructures to enable a new anti-biofouling mode that involves spontaneous biofilm disassembly followed by bacterial eradication is developed. A facile and universal metal-polyphenol network (MPN) is designed to robustly anchor the MOF nanoarmor of biocidal Cu2+ ions and anti-biofilm d-amino acid ligands to a variety of substrates across different material categories and surface topologies. Incorporating a diverse array of chiral amino acids endows the resultant coatings with widespread signals for biofilm dispersal, facilitating copper-catalyzed chemodynamic reactions and inherent mechano-bactericidal activities. This synergistic mechanism yields unprecedented anti-biofouling efficacy elucidated by RNA-sequencing transcriptomics analysis, enhancing broad-spectrum antibacterial activities, preventing biofilm formation, and destroying mature biofilms. Additionally, the chelation-directed amorphous/crystalline coatings can activate photoluminescent properties to inhibit the settlement of microalgae biofilms. This study provides a distinctive perspective on chirality-enhanced antimicrobial behaviors and pioneers a rational pathway toward developing next-generation anti-biofouling coatings for diverse applications.

Recent Progress of 2D Materials-Based Photodetectors from UV to THz Waves: Principles, Materials, and Applications.

Photodetectors are one of the most critical components for future optoelectronic systems and it undergoes significant advancements to meet the growing demands of diverse applications spanning the spectrum from ultraviolet (UV) to terahertz (THz). 2D materials are very attractive for photodetector applications because of their distinct optical and electrical properties. The atomic-thin structure, high carrier mobility, low van der Waals (vdWs) interaction between layers, relatively narrower bandgap engineered through engineering, and significant absorption coefficient significantly benefit the chip-scale production and integration of 2D materials-based photodetectors. The extremely sensitive detection at ambient temperature with ultra-fast capabilities is made possible with the adaptability of 2D materials. Here, the recent progress of photodetectors based on 2D materials, covering the spectrum from UV to THz is reported. In this report, the interaction of light with 2D materials is first deliberated on in terms of optical physics. Then, various mechanisms on which detectors work, important performance parameters, important and fruitful fabrication methods, fundamental optical properties of 2D materials, various types of 2D materials-based detectors, different strategies to improve performance, and important applications of photodetectors are discussed.

Surface Chemistry of a Halogenated Borazine: From Supramolecular Assemblies to a Random Covalent BN-Substituted Carbon Network.

The on-surface synthesis strategy has emerged as a promising route for fabricating well-defined two-dimensional (2D) BN-substituted carbon nanomaterials with tunable electronic properties. This approach relies on specially designed precursors and requires a thorough understanding of the on-surface reaction pathways. It promises precise structural control at the atomic scale, thus complementing chemical vapor deposition (CVD). In this study, we investigated a novel heteroatomic precursor, tetrabromoborazine, which incorporates a BN core and an OH group, on Ag(111) using low temperature scanning tunnelling microscopy/spectroscopy (LT-STM/STS) and X-ray photoelectron spectroscopy (XPS). Through sequential temperature-induced reactions involving dehalogenation and dehydrogenation, distinct tetrabromoborazine derivatives were produced as reaction intermediates, leading to the formation of specific self-assemblies. Notably, the resulting intricate supramolecular structures include a chiral kagomé lattice composed of molecular dimers exhibiting a unique electronic signature. The final product obtained was a random covalent carbon network with BN-substitution and embedded oxygen heteroatoms. Our study offers valuable insights into the significance of the structure and functionalization of BN precursors in temperature-induced on-surface reactions, which can help future rational precursor design. Additionally, it introduces complex surface architectures that offer a high areal density of borazine cores.

Recent Developments in the Fabrication and Application of Superhydrophobic Suraces.

A superhydrophobic surface is defined as having a contact angle exceeding 150 °C, indicating a remarkable ability to repel water. Generally, superhydrophobicity originates from the utilization of low-surface-energy materials with unique micro- and nanostructures. Superhydrophobic surfaces have gained considerable recognition and are widely employed in diverse areas for anti-icing, oil-water separation, anticorrosion, self-cleaning, blood-repellent, and antibacterial applications. These surfaces can greatly enhance industrial processes by yielding significant performance improvements. In this review, we introduce the basic theories that provide a foundation for understanding the hydrophobic properties of superhydrophobic surfaces. We then discuss current techniques for fabricating superhydrophobic coatings, critically analyzing their strengths and limitations. Furthermore, we provide an overview of recent progress in the application of superhydrophobic materials. Finally, we summarize the challenges in developing superhydrophobic materials and future trends in this field. The insights provided by this review can help researchers understand the basic knowledge of superhydrophobic surfaces and obtain the latest progress and challenges in the application of superhydrophobic surfaces. It provides help for further research and practical application of superhydrophobic surfaces.

Bubble-Guidance Breaking Gas Shield for Highly Efficient Overall Water Splitting.

Overall water splitting is a promising technology for sustainable hydrogen production, but the primary challenge is removing bubbles from the electrode surface quickly to increase hydrogen production. Inspired by the directional fluid transport properties of natural biological surfaces like Nepenthes peristome and Morpho butterfly's wings, here a strategy is demonstrated to achieve highly efficient overall water splitting by a bubble-guidance electrode, that is, an anisotropic groove-micro/nanostructured porous electrode (GMPE). Gradient groove micro/nanostructures on the GMPE serve as high-speed bubble transmission channels and exhibit superior bubble-guidance capabilities. The synergistic effect of the asymmetric Laplace pressure generated between microscale porous structure and groove patterns and the buoyancy along the groove patterns pushes the produced bubbles directionally to spread, transport, and detach from the electrode surface in time. Moreover, the low adhesive nanosheet arrays are beneficial to reduce bubble size and increase bubble release frequency, which cooperatively improve mass transfer with the microscale structure. Notably, GMPE outperforms planar-micro/nanostructured porous electrode (PMPE) in hydrogen/oxygen evolution reactions, with GMPE||GMPE showing better water splitting performance than commercially available RuO2||20 wt.% Pt/C. This work improves electrodes for better mass transfer and kinetics in electrochemical reactions at solid-liquid-gas interfaces, offering insight for designing and preparing gas-involved photoelectrochemical electrodes.

The effects of conjugating anti-MUC1 aptamers on gold nanobipyramids and nanostars for photothermal cancer ablation.

Aim: To ascertain the impact of shape and surface modification of anisotropic nanoparticles on the toxicity and photothermal efficiency toward cancerous cell lines. Methods: Gold nanobipyramids and nanostars surface modified with MUC1 aptamer were used in the current study to explore the toxicity and photothermal efficiency on MCF7 breast cancer cell lines via MTT assay. Results: Surface functionalization with MUC1 aptamer showed significant reduction in % cytotoxicity and increase in % specific internalization of nanostructures into MCF7 cell lines. Further, the photothermal studies accomplished at IC50 concentration for 6 h of treatment and laser exposure for 15 min reported that aptamer-conjugated nanobipyramids were more effective and specific toward MCF7 cell lines than aptamer-conjugated nanostars. Conclusion: This work establishes a platform for the development of tailored photoablation based gold nanostructures for in vivo studies.

[Box: see text].

Recent Advances in Antimony Selenide Photodetectors.

Photodetectors (PDs) rapidly capture optical signals and convert them into electrical signals, making them indispensable in a variety of applications including imaging, optical communication, remote sensing, and biological detection. Recently, antimony selenide (Sb2Se3) has achieved remarkable progress due to its earth-abundant, low toxicity, low price, suitable bandgap width, high absorption coefficient, and unique structural characteristics. Sb2Se3 has been extensively studied in solar cells, but there's a lack of timely updates in the field of PDs. A literature review based on Sb2Se3 PDs is urgently warranted. This review aims to provide a concise understanding of the latest progress in Sb2Se3 PDs, with a focus on the basic characteristics and the performance optimization for Sb2Se3 photoconductive-type and photodiode-type detectors, including nanostructure regulation, process optimization, and stability improvement of flexible devices. Furthermore, the application progresses of Sb2Se3 PDs in heart rate monitoring, and monolithic-integrated matrix images are introduced. Finally, this review presents various strategies with potential and feasibility to address challenges for the rapid development and commercial application of Sb2Se3 PDs.

Bovine serum albumin as a nanocarrier for efficient encapsulation of hydrophobic garcinol-A strategy for modifying the in vitro drug release kinetics.

Garcinia indica, known as kokum, has been extensively researched for its therapeutic potential. Among the wide variety of phytoconstituents, garcinol is the most efficacious, holding anti-inflammatory, anti-cancer, and anti-diabetic properties. Hydrophobicity and a certain level of toxicity have constrained the drug's application and necessitated a modified dosage form design. The drug has been well explored in the form of extracts but bears very limited application in dosage forms. These prompted in implementation of protein polymers, due to non-toxicity, biocompatibility, and biodegradability. BSA encapsulates the drug, by the desolvation method. The unavailability of past exploration of garcinol with protein polymer accelerated the novelty of this study, to improve the solubility and bioavailability of the drug, modify the drug release kinetics, and ascertain the effectiveness of the NPs to combat inflammation in-vitro. NPs were characterized and satisfactory outcomes were retrieved in terms of all characterizations. The drug release studies depicted a sustained release of up to 85 % over 16 h, ensuring that garcinol can be modulated to give a desired scale of modified release. In vitro cellular uptake studies suggested a substantial uptake of NPs in cell lines and its effectiveness to mitigate inflammation was affirmed by in-vitro anti-inflammatory studies, using ELISA.

Nanoporous, Ultrastiff, and Transparent Plastic-like Polymer Hydrogels Enabled by Hydrogen Bonding-Induced Self-Assembly.

Most natural supporting tissues possess both exceptional mechanical strength, a significant amount of water, and the anisotropic structure, as well as nanoscale assembly. These properties are essential for biological processes, but have been challenging to emulate in synthetic materials. In an effort to achieve simultaneous improvement of these trade-off features, a hydrogen bonding-induced self-assembly strategy was introduced to create nanoporous plastic-like polymer hydrogels. Multiple hydrogen bonding-mediated networks and nanoporous orientation structures endow transparent hydrogels with remarkable mechanical robustness. They exhibit Young's modulus of up to 223.7 MPa and a breaking strength of up to 10.3 MPa, which are superior to those of most common polymer hydrogels. The uniform porous nanostructures of hydrogen-bonded hydrogels contribute to a significantly larger specific surface area compared to conventional hydrogels. This allows for the retention of high mechanical properties in environments with a high water content of 70 wt %. A rubbery stage is observed during the heating process, which can reverse and reshape the manufacture of objects with various desired 2D or 3D shapes using techniques such as origami and kirigami. Finally, as a proof-of-concept, the outstanding mechanical properties of poly(MAA-co-AA-co-NVCL) hydrogel, combined with its high water content, make it suitable for applications such as smart temperature monitors, multilevel information anticounterfeiting, and artificial muscles.

Blade-Coated Porous 3D Carbon Composite Electrodes Coupled with Multiscale Interfaces for Highly Sensitive All-Paper Pressure Sensors.

Flexible and wearable pressure sensors hold immense promise for health monitoring, covering disease detection and postoperative rehabilitation. Developing pressure sensors with high sensitivity, wide detection range, and cost-effectiveness is paramount. By leveraging paper for its sustainability, biocompatibility, and inherent porous structure, herein, a solution-processed all-paper resistive pressure sensor is designed with outstanding performance. A ternary composite paste, comprising a compressible 3D carbon skeleton, conductive polymer poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate), and cohesive carbon nanotubes, is blade-coated on paper and naturally dried to form the porous composite electrode with hierachical micro- and nano-structured surface. Combined with screen-printed Cu electrodes in submillimeter finger widths on rough paper, this creates a multiscale hierarchical contact interface between electrodes, significantly enhancing sensitivity (1014 kPa-1) and expanding the detection range (up to 300 kPa) of as-resulted all-paper pressure sensor with low detection limit and power consumption. Its versatility ranges from subtle wrist pulses, robust finger taps, to large-area spatial force detection, highlighting its intricate submillimeter-micrometer-nanometer hierarchical interface and nanometer porosity in the composite electrode. Ultimately, this all-paper resistive pressure sensor, with its superior sensing capabilities, large-scale fabrication potential, and cost-effectiveness, paves the way for next-generation wearable electronics, ushering in an era of advanced, sustainable technological solutions.

Investigations of adsorption and photoluminescence properties of encapsulated Al-ZnO nanostructures: Synthesis, morphology and dye degradation studies.

This study focuses on the solution combustion approach to examine the nanostructures of undoped and doped ZnO with different concentrations of Al (0.1 % and 0.2 %). Various physical techniques were utilized to characterize the synthesized nanoparticles. X-ray diffraction (XRD) revealed the crystalline materials, while scanning electron microscopy (SEM) with energy-dispersive X-ray (EDX) findings confirmed the products with particle size and the insertion of Al into the ZnO lattice. Fourier-transform infrared spectra (FTIR) confirmed the presence of different functional groups in the obtained material. The results indicate that Al-doped ZnO (Al-ZnO) nanoparticles show promising properties for optoelectronics and photoluminescence. Photoluminescence analysis indicated that an increase in Al3+ (0.2 %) concentration resulted in a decrease in peak intensity and an increase in the full width at half maximum. The band gap was calculated using the Taucs plot. The study also highlights the effectiveness of Zn1-xAlxO nanostructures in degrading organic pollutants, particularly in adsorbing Malachite Green (MG) dye. Among the samples, the 0.2 % Al-doped ZnO exhibited superior dye degradation efficiency due to its enhanced adsorption capacity and smaller particle size, as evidenced by multilayer adsorption capacity and chemisorption during the degradation process. This study provides valuable insights into the potential applications of Al-doped ZnO nanoparticles in various environmental and technological fields, emphasizing their significance in the degradation of organic pollutants.

What Are the Key Factors for the Detection of Peptides Using Mass Spectrometry on Boron-Doped Diamond Surfaces?

We investigated the use of boron-doped diamond (BDD) with different surface morphologies for the enhanced detection of nine different peptides by matrix-assisted laser desorption/ionisation mass spectrometry (MALDI-MS). For the first time, we compared three different nanostructured BDD film morphologies (Continuous, Nanograss, and Nanotips) with differently terminated surfaces (-H, -O, and -F) to commercially available Ground Steel plates. All these surfaces were evaluated for their effectiveness in detecting the nine different peptides by MALDI-MS. Our results demonstrated that certain nanostructured BDD surfaces exhibited superior performance for the detection of especially hydrophobic peptides (e.g., bradykinin 1-7, substance P, and the renin substrate), with a limit of detection of down to 2.3 pM. Further investigation showed that hydrophobic peptides (e.g., bradykinin 1-7, substance P, and the renin substrate) were effectively detected on hydrogen-terminated BDD surfaces. On the other hand, the highly acidic negatively charged peptide adrenocorticotropic hormone fragment 18-39 was effectively identified on oxygen-/fluorine-terminated BDD surfaces. Furthermore, BDD surfaces reduced sodium adduct contamination significantly.

Hot Embossing to Fabricate Parylene-Based Microstructures and Its Impact on the Material Properties.

This study aims to establish and optimize a process for the fabrication of 3D microstructures of the biocompatible polymer Parylene C using hot embossing techniques. The different process parameters such as embossing temperature, embossing force, demolding temperature and speed, and the usage of a release agent were optimized, utilizing adhesive micropillars as a use case. To enhance compatibility with conventional semiconductor fabrication techniques, hot embossing of Parylene C was adapted from conventional stainless steel substrates to silicon chip platforms. Furthermore, this adaptation included an investigation of the effects of the hot embossing process on metal layers embedded in the Parylene C, ensuring compatibility with the ultra-thin Parylene printed circuit board (PCB) demonstrated previously. To evaluate the produced microstructures, a combination of characterization methods was employed, including light microscopy (LM) and scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FTIR). These methods provided comprehensive insights into the morphological, chemical, and structural properties of the embossed Parylene C. Considering the improved results compared to existing patterning techniques for Parylene C like plasma etching or laser ablation, the developed hot embossing approach yields a superior structural integrity, characterized by increased feature resolution and enhanced sidewall smoothness. These advancements render the method particularly suitable for diverse applications, including but not limited to, sensor optical components, adhesive interfaces for medical wearables, and microfluidic systems.

Chitosan-based promising scaffolds for the construction of tailored nanosystems against osteoporosis: Current status and future prospects.

Despite advancements in therapeutic techniques, restoring bone tissue after damage remains a challenging task. Tissue engineering or targeted drug delivery solutions aim to meet the pressing clinical demand for treatment alternatives by creating substitute materials that imitate the structural and biological characteristics of healthy tissue. Polymers derived from natural sources typically exhibit enhanced biological compatibility and bioactivity when compared to manufactured polymers. Chitosan is a unique polysaccharide derived from chitin through deacetylation, offering biodegradability, biocompatibility, and antibacterial activity. Its cationic charge sets it apart from other polymers, making it a valuable resource for various applications. Modifications such as thiolation, alkylation, acetylation, or hydrophilic group incorporation can enhance chitosan's swelling behavior, cross-linking, adhesion, permeation, controllable drug release, enzyme inhibition, and antioxidative properties. Chitosan scaffolds possess considerable potential for utilization in several biological applications. An intriguing application is its use in the areas of drug distribution and bone tissue engineering. Due to their excellent biocompatibility and lack of toxicity, they are an optimal material for this particular usage. This article provides a comprehensive analysis of osteoporosis, including its pathophysiology, current treatment options, the utilization of natural polymers in disease management, and the potential use of chitosan scaffolds for drug delivery systems aimed at treating the condition.