Novel approach for characterizing clinical load application of superelastic orthodontic wires.

OBJECTIVE: Current standardized in vitro bending experiments for orthodontic archwires cannot capture friction conditions and load sequencing during multi-bracket treatment. This means that clinically relevant forces exerted by superelastic wires cannot be predicted. To address these limitations, this study explored a novel test protocol that estimates clinical load range. METHODS: The correction of a labially displaced maxillary incisor was simulated using an in vitro model with three lingual brackets. Deflection force levels derived from four different protocols were designed to explore the impact of friction and wire load history. These force levels were compared in nickel-titanium (NiTi) archwires with three commonly used diameters. The unloading path varied between protocols, with single or multiple sequences and different load orders and initial conditions. RESULTS: Deflection forces from the new protocol, employing multiple continuous load/unload cycles (CCincr), consistently exceeded those from the conventional protocol using a single continuous unloading path (CUdecr). Mean differences in plateau force ranged from 0.54 N (Ø 0.014" wire) to 1.19 N (Ø 0.016" wire). The CCinr protocol also provided average force range estimates of 0.47 N (Ø 0.012" wire), 0.89 N (Ø 0.014" wire), and 1.15 N (Ø 0.016" wire). SIGNIFICANCE: Clinical orientation towards CUdecr carries a high risk of excessive therapeutic forces because clinical loading situations caused by friction and load history are underestimated. Physiological tooth mobility using NiTi wires contributes decisively to the therapeutic load situation. Therefore, only short unloading sequences starting from the maximum deflection in the load history, as in CCincr, are clinically meaningful.

Exploring the Potential of MIM-Manufactured Porous NiTi as a Vascular Drug Delivery Material.

Porous nickel-titanium (NiTi) manufactured using metal injection molding (MIM) has emerged as an innovative generation of drug-loaded stent materials. However, an increase in NiTi porosity may compromise its mechanical properties and cytocompatibility. This study aims to explore the potential of porous NiTi as a vascular drug delivery material and evaluate the impact of porosity on its drug loading and release, mechanical properties, and cytocompatibility. MIM, combined with the powder space-holder method, was used to fabricate porous NiTi alloys with three porosity levels. The mechanical properties of porous NiTi were assessed, as well as the surface cell growth capability. Furthermore, by loading rapamycin nanoparticles onto the surface and within the pores of porous NiTi, we evaluated the in vitro drug release behavior, inhibitory effect on cell proliferation, and inhibition of neointimal hyperplasia in vivo. The results demonstrated that an increase in porosity led to a decrease in the mechanical properties of porous NiTi, including hardness, tensile strength, and elastic modulus, and a decrease in the surface cell growth capability, affecting both cell proliferation and morphology. Concurrently, the loading capacity and release duration of rapamycin were extended with increasing porosity, resulting in enhanced inhibitory effects on cell proliferation in vitro and inhibition of neointimal hyperplasia in vivo. In conclusion, porous NiTi holds promise as a desirable vascular drug delivery material, but a balanced consideration of the influence of porosity on both mechanical properties and cytocompatibility is necessary to achieve an optimal balance among drug-loading and release performance, mechanical properties, and cytocompatibility.

Fifteen years of engine-driven nickel-titanium reciprocating instruments, what do we know so far? An umbrella review.

Numerous systematic reviews (SRs) have produced conflicting findings on engine-driven nickel-titanium reciprocating instruments (reciprocating instruments) since Yared's seminal study 15 years ago. This umbrella review analysed SRs examining the clinical and laboratory evidence regarding reciprocating instruments for root canal treatment. SRs that evaluated qualitatively and/or quantitatively the outcomes postoperative pain, oral health-related quality of life (OHRQoL), shaping ability, debris extrusion, microbial load, endotoxins reduction, cyclic fatigue, file fracture, dentinal cracks and root canal filling removal were included. The AMSTAR 2 tool was used to evaluate SRs quality, while the ROBIS tool to assess risk of bias (RoB). Forty SRs were included. The SRs revealed predominantly 'high' RoB and 'critically low' quality. Most focused on technical outcomes, exhibiting significant methodological and statistical heterogeneity. Findings suggest comparable efficacy between reciprocating and rotary instruments. However, due to the scarcity of high-quality evidence, future well-designed studies and reviews considering core outcome measures are needed.

Robot-Assisted Correction of a Supra-Long Tracheal Stenosis Using C-Type Nickel-Titanium Alloy Exterior Stenting and Suspension Fixation Technique: A Case Report.

T-tubes and airway stents are commonly used but have limited effectiveness and frequent complications. A 50-year-old male patient presented with severe tracheal stenosis, affecting an 8.7 cm length of the airway. We employed an innovative approach known as external suspension fixation of tracheal stent using robotic assistance. This method involves surgically attaching the stent to the exterior of the trachea to provide support and stabilize the softened or collapsed tracheal segments. We designed a C-shaped nickel-titanium alloy exterior stent and successfully fixed it using robotic assistance. This intervention effectively restored tracheal function and led to a favorable postoperative recovery. The technique does not affect tracheal membrane function or airway mucociliary clearance. It could potentially be considered as a new option for treating long-segment benign tracheal softening or collapse.

Electrochemical Properties of Nickel-Titanium Rotary Endodontic Instruments.

INTRODUCTION: Nickel-titanium rotary endodontic files have been commercially available for decades, but more recent innovations have introduced heat-treated and surface-treated files. This study investigated the corrosion properties of various nickel-titanium files in normal saline and sodium hypochlorite (NaOCl). METHODS: Ten different file brands of size 40 with a 0.04 taper were subjected to electrochemical testing in 0.9% NaCl (saline) and 5.25% NaOCl at room temperature. The Open Circuit Potential (OCP) was observed for 1 hour followed by a cyclic polarization test from -300 to 700 mV and back to -300 mV (vs OCP). Nonparametric ANOVA and a pairwise comparison (P < .05) were used for statistical analysis of the OCP at 1 hour and the corrosion current (Icorr) obtained via the cyclic polarization test. RESULTS: Significant differences (P < .05) were found between files with respect to OCP and Icorr in both solutions. Nine files exhibited significantly greater (P < .05) Icorrs in NaOCl than in saline. Conversely, pitting corrosion was observed in the saline solution but not NaOCl. Weak and/or moderate correlations existed between OCP and Icorr measures in the 2 solutions. CONCLUSION: Significant differences in electrochemical properties were observed among the 10 brands of files. Overall, there was not a clear trend between conventional, heat-treated, or surface-treated files among OCP or Icorr in either solution.

Dynamic Photoelastic Analysis of Stress Distribution in Simulated Canals Using Rotary Instruments with Varied Tip and Taper Sizes: A Quasi-3D Approach.

INTRODUCTION: To compare the stress produced on the walls of simulated canals by rotary instruments with varied tip and taper sizes. METHODS: Ninety isotropic transparent blocks, each containing a 60-degree curved canal, were distributed into 18 groups (n = 5) based on the instrument tip (sizes 10, 15, 20, 25, 30, and 35) and taper (sizes 0.02, 0.04, and 0.06). The blocks were fixed in a circular polariscope setup for dark field analysis. A digital camera was employed to capture the real-time birefringence patterns generated by each instrument. Digital image frames, corresponding to the instrument reaching the end of each canal third, were extracted and evaluated by 2 independent observers for the stress generation on canal walls. The data analysis employed a semi-quantitative scale ranging from 0 to 5. Cohen's Kappa coefficient test was used to determine the inter-observer agreement while the results were compared using Kruskal-Wallis test followed by an all-pairwise posthoc procedure (α = 5%). RESULTS: Inter-observer agreement was 0.95. A significant influence of the tip size on stress was observed across the coronal (P = .011), middle (P = .006), and apical (P = .026) thirds. In contrast, taper size did not affect the stress induced at the coronal (P = .509), middle (P = .958), or apical (P = .493) thirds. The variations in tip and taper sizes did not result in a significant stress differences among the thirds (P = .181). CONCLUSIONS: The stress significantly increased across all canal thirds with larger tip sizes of rotary instruments, whereas the taper sizes did not influence the stress when compared to the canal thirds.

Clinical effect of chlorhexidine and sodium fluoride on corrosion behavior and surface topography of nitinol orthodontic archwires.

BACKGROUND: Alterations in the mechanical properties of the materials utilized in orthodontic appliances could affect the working properties of the appliances, thereby affecting clinical progress and outcome. Numerous studies have confirmed the correlation between alloy corrosion and raised surface roughness, which has a direct impact on the working characteristics of orthodontic archwires. METHODS: Thirty nickel-titanium (NiTi) orthodontic archwires were utilized in this study. Patients were randomly selected and allocated into three groups according to the randomization plan; (The control group): subjects practiced regular oral hygiene; (The fluoride group): subjects used fluoride for intensive prophylaxis; (The chlorhexidine group): subjects used chlorhexidine. Representative samples were evaluated by SEM, and then SEM images with high resolution were examined using Image J software to determine the surface roughness and obtain the results for further statistical analysis. RESULTS: Our findings indicated a significant difference was found between the three groups regarding the anterior and posterior parts between the control and the two other groups and a non-significant difference between NaF and CHX groups. Overall, the p-value for group comparisons was 0.000 for both parts, indicating a highly significant difference especially between the control and NaF groups. CONCLUSION: Mouthwashes containing sodium fluoride demonstrated more significant surface alterations than the control and CHX groups and should be prescribed in accordance with orthodontic materials to reduce side effects.

Root Canal Instrumentation: Current Trends and Future Perspectives.

The evolution of root canal instrumentation techniques has significantly impacted the field of endodontics, enhancing both the efficiency and outcomes of treatments. This review outlines the transition from manual to mechanical and rotary instruments, highlighting the role of nickel-titanium (NiTi) alloys and smart technologies in advancing procedural precision and reducing patient discomfort. Key historical developments and technological innovations, such as digital imaging and navigation systems, are explored for their contributions to improved clinical outcomes and patient satisfaction. Additionally, the review addresses the challenges presented by the complex anatomy of the root canal system and the advent of current instrumentation techniques. The potential of emerging trends, including artificial intelligence and advances in materials science, is discussed in the context of future endodontic practices. Despite the progress, challenges related to using advanced instrumentation methods, ethical considerations, and the cost factor of new technologies persist. The present review underscores the ongoing need for research and development to further refine root canal instrumentation techniques, ensuring that advancements in endodontic care remain patient-centered and accessible.

Effects of increasing instrument size and taper on the disinfection and shaping of mandibular incisors.

This study assessed canal preparation effects on disinfection and dentin preservation. Thirty mandibular incisors were paired into two experimental groups (n = 10). Following contamination, the initial microbial sample was collected. Instruments 30/0.03 (Group 1) and 30/0.05 (Group 2) were employed and a second sample was obtained. Canals were enlarged using instruments 40/0.03 and 40/0.05, respectively, and a third sample was collected. Final irrigation was performed, and sample S4 obtained. A final scan evaluated volume, surface area, unprepared areas, removed dentin and dentin thickness. Data were analysed using Student t-test, Mann-Whitney, Kruskal-Wallis and Dunn tests. A significant difference was observed between S1 and other time points (p < 0.05). Comparison between groups showed no differences in bacterial loads and in the percentage of microbial reduction (p > 0.05). Group 2 exhibited greater reduction in dentin thickness than group 1 in the mesial aspect of the root (p < 0.05). Instrument 30/0.03 might provide effective disinfection and safety during mandibular incisors canal preparation.

Effects of Side Flattening on Torsional and Cyclic Fracture Resistance of Nickel-Titanium File.

INTRODUCTION: The purpose of this study was to evaluate the effect of side flattening of cutting flutes on the cyclic resistance and torsional resistance of nickel-titanium files. METHODS: Both novel flattened Platinum V.EU (PL) and standard nonflattened CC Premium V.EU (CC) rotaries were tested. For cyclic fatigue tests, all the files were rotated in an artificial root canal with a curvature of 45° and a radius of 6.06 mm at 300 rpm (n = 15 in each group). The number of cycles to failure (NCF) was calculated. For torsional tests, the files were rotated at 2 rpm clockwise until fracture occurred. The maximum torque value at fracture was measured and the toughness and distortion angle were computed. Subsequently, 5 fragments were randomly selected in each experiment, the cross-section and longitudinal direction of the fragments were photographed using a scanning electron microscope. An unpaired t-test was performed at a significance level of 95%. RESULTS: There was a statistically significant difference in NCF between CC and PL (P < .05). CC showed higher NCF than PL. There was no statistically significant difference between CC and PL with regards to the parameters related to torsional resistance (distortion angle, ultimate strength, and toughness) (P > .05). CONCLUSION: Within the limitations of this study, side flattening of the file did not improve cyclic resistance or torsional resistance of the files. As side flattening may reduce a file's cyclic resistance, such files should be used with caution in clinical practice.

Phase transformation behavior and mechanical properties of HyFlex EDM nickel-titanium endodontic rotary instrument: Evaluation at body temperature.

Background/purpose: Temperature-dependent phase compositional changes influence the mechanical properties of heat-treated nickel-titanium (NiTi) rotary instruments. This study evaluated the phase composition, bending properties, and cyclic fatigue resistance of HyFlex EDM NiTi rotary instruments against differently heat-treated and non-heat-treated NiTi instruments at body temperature (BT). Materials and methods: HyFlex EDM OneFile (EDM) instruments, heat-treated HyFlex CM (CM) and Twisted File (TF) instruments, and non-heat-treated K3 instruments (size #25/.08) were subjected to differential scanning calorimetry, and the martensitic, R-phase, and reverse transformation starting and finishing temperatures were determined. A cantilever bending test and a cyclic fatigue test were conducted at BT (37 °C ± 1.0 °C), and the bending load and number of cycles to failure (NCF) were recorded. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney U tests (α = 0.05). Results: TF and K3 had reverse transformation finishing temperatures lower than BT, while those for EDM and CM were higher than BT. The bending loads at a 0.5 mm deflection were in the order of EDM < TF < CM < K3 (P < 0.05), and those at a 2.0 mm deflection were EDM < CM and TF < K3 (P < 0.05). EDM had the highest NCF among the four instruments (P < 0.05). Conclusion: The EDM instrument had a reverse transformation finishing temperature higher than BT indicating its martensite/R-phase composition at BT. The EDM instrument had superior flexibility and greater resistance to cyclic fatigue than the CM, TF, and K3 instruments at BT.

Comparing the Efficacy of Different Archwire Materials in Accelerating Orthodontic Tooth Movement.

Background: Orthodontic treatment is commonly used to correct misaligned teeth and improve dental aesthetics and function. Archwires play a crucial role in this treatment by exerting forces on teeth, prompting them to shift into desired positions. Materials and Methods: For this experimental study, 60 participants requiring orthodontic treatment were selected and divided into three groups: Group A, treated with stainless steel archwires; Group B, treated with nickel-titanium archwires; and Group C, treated with beta-titanium archwires. Standardized orthodontic procedures were followed for all participants. The rate of tooth movement was measured over a period of 6 months using digital models and a calibrated measurement technique. Results: The study revealed notable differences in the rate of orthodontic tooth movement among the three groups. Group B (nickel-titanium archwires) demonstrated the highest mean rate of tooth movement, with an average of 1.5 mm per month. Group A (stainless steel archwires) exhibited a mean rate of 1.2 mm per month, while Group C (beta-titanium archwires) showed the lowest mean rate at 0.9 mm per month. Conclusion: In conclusion, this study highlights the varying efficacy of different archwire materials in accelerating orthodontic tooth movement. Nickel-titanium archwires exhibited the highest rate of tooth movement compared to stainless steel and beta-titanium archwires.

Microscopic Evaluation of Dentinal Defects after Root Canal Preparation with Different Hand and Nickel-Titanium Files; An In Vitro Study.

Background: Effective endodontic instrumentation aims to remove microorganisms, debris, and tissue from the root canal while maintaining dentinal integrity. This study compares dentinal defect incidence following canal preparation with different hand files, nickel-titanium rotary files, and reciprocating files. Materials and Methods: Eighty single-rooted mandibular premolars with mature apices were collected. Four groups (n = 20) were established based on canal patency establishment, canal preparation technique, irrigation solution, and final irrigation. After root sectioning at 3 mm, 6 mm, and 9 mm from the apex, slices were examined under a stereomicroscope, and dentinal defects were recorded. A second examiner reviewed the images. Results: The results showed significant difference of P = 0.031 among Hand files vs. Rotary ProTaper files: In Hand files vs. Reciprocating WaveOne files significant difference was P = 0.048, and for rotary ProTaper files vs. Reciprocating WaveOne files: No significant difference (P = 0.643). Dentinal defect counts were similar at 3 mm, 6 mm, and 9 mm. Statistically significant variation was observed between hand files and rotary files, as well as hand files and reciprocating files. Conclusion: Both rotary and reciprocating files showed a statistically significant increase in dentinal defect incidence compared to hand files. However, clinical implications should be considered cautiously. Instrumentation technique selection should be based on clinical context, operator experience, and patient factors. Further clinical studies are needed for validation.

Uprighting a mesially impacted mandibular second molar with scissor bite using simple tubes.

Orthodontic uprighting or traction of an impacted mandibular second molar often necessitates invasive interventions. This report aims to illustrate the utilization of nickel-titanium wire segments inserted into small, simple tubes for uprighting mesially impacted mandibular second molars and also for scissor bite correction. The term "simple tube" refers to a tube without a bonding base attached to a tooth surface by covering it with flowable composite resin. Due to the absence of a bonding base, the simple tube is characterized by its diminutive size and minimal profile height, facilitating placement on partially exposed second molars and unconventional positioning to adjust the force geometry. In this case study, mesially-impacted mandibular second molars with scissor bite were uprighted in a 21-year-old male utilizing simple tubes. Simple tubes can be used for molar uprighting and scissor bite correction buccally and lingually.

Factors influencing NiTi endodontic file separation: A thematic review.

Nickel-titanium (NiTi) file separation during endodontic treatment is an undesirable event. This phenomenon needs to be understood by knowing the factors influencing fracture in endodontic files. There is a large amount of literature where these factors and their influence have been studied, increasing the knowledge about the mechanisms involved, mainly related to wire technology, file shapes and geometry, operator manipulation, the anatomy of the root canal, and the irrigation and sterilization processes. As many factors are involved, the complexity of the fracture phenomena increases and the isolated correlation of one factor with the file fracture becomes a small part of comprehending the separation phenomena. This thematic review aims to compile important reports from 2014 to 2022 on the factors influencing NiTi file separation. The information obtained was classified into wire technology, file geometry, operational aspects, irrigation and sterilization, and anatomy. For this purpose, the Scopus, Web of Science and ScienceDirect databases were consulted using a search string. Filters were applied to consolidate the final set of relevant papers covering the subject of factors influencing endodontic file separation. It was found that the fracture of NiTi files incorporates different mechanisms that operate simultaneously during the endodontic procedure and strongly affect the instrument performance. The collected information promotes good practices to prevent file separation.

Micro-computed tomography analysis of shaping ability of nickel-titanium instruments activated by continuous rotation or adaptive motion.

This study assessed the ability of Twisted File Adaptive (TFA), TruNatomy (TRN) and VDW.Rotate (VR) instruments activated by continuous rotation (CR) and adaptive motion (AM) to shape curved root canals. Thirty mandibular molars with two separate mesial canals 20°-40° curved were collected and scanned using micro-computed tomography (µCT). The canals were then randomly assigned into six groups (n = 10): TRN, VR or TFA instruments activated by CR or AM. TRN groups 17.02, 20.04 and 26.04; VR groups 15.04, 20.05 and 25.06; TFA groups were shaped consecutively using 15K-file, 20.04 and 25.06. After they were shaped, the canals were scanned again. The volume of removed dentin, canal transportation and centring ratio were calculated µCT images. All data were analysed using the Kruskal-Wallis test or one-way analysis of variance (p < 0.05). With both kinematics, the TRN instrument removed the least amount of dentin, the VR-CR and the TFA-AM removed the most (p < 0.05). The transportation and centring ratios among all groups were similar (p > 0.05). The volume of dentin removed, the diameter or design features of the instruments and different kinematics did not affect the centring ratio and the amount of transportation and remained within safe limits. All three instruments activated by either kinematics were found to have similar effectiveness in shaping curved root canals.

Micro-computed tomographic evaluation of the shaping ability of three nickel-titanium rotary systems in the middle mesial canal of mandibular first molars: an ex vivo study based on 3D printed tooth replicas.

BACKGROUND: The preparation of the middle mesial (MM) canal of mandibular molars represents a challenge because it is often curved, narrow, and close to the root concave. The purpose of this study was to evaluate the ex vivo shaping ability of 3 nickel-titanium (NiTi) rotary systems in the MM canal using 3D printed resin tooth replicas. METHODS: A permanent mandibular first molar with a MM canal was acquired from a pool of extracted teeth and reproduced by a 3D printer. The resin tooth replicas (n = 18) were equally assigned to 3 groups for the evaluation of the shaping abilities of 3 NiTi rotary systems (OneShape [OS], Twisted Files [TF], and ProTaper Gold [PTG]) according to the manufacturer's recommendations. The tooth replicas were scanned by micro-computed tomography (micro-CT) twice before and after instrumentation of the mesiobuccal (MB), mesiolingual (ML), and MM root canals. After 3D reconstruction, the canal straightening, change of root canal volume and surface area, the mesial and distal canal wall thickness and canal transportation at the levels of 1, 2, and 3 mm below furcation were assessed. One-way variance analysis and Turkey's post hoc test were used for comparisons of the means among different groups, and paired-t test was used to compare the mesial and distal sides of the mesial roots. RESULTS: As compared with OS and TF, the use of PTG in preparation of MM canals resulted in significantly more straightening of canal curvature (p < 0.05), greater post-instrumentation canal volume and surface area, and thinner mesial and distal remaining canal wall thickness at 1, 2 and 3 mm below furcation (all p < 0.05). Regarding the root canal transportation in the mesiodistal direction, there was no significant difference among the 3 instruments (all p > 0.05) after the preparation of the MB and ML canals. However, in the MM canal, more pronounced transportation was detected in the PTG group at 2 mm below furcation, and in the TF group at 3 mm below furcation as compared with the other 2 systems (both p < 0.05). CONCLUSIONS: 3D printed tooth replicas have the advantages of consistency and can be an ideal model to evaluate the shaping ability of different instruments in the MM canal. OS and TF files performed similarly and both are appropriate for shaping the MM canal, while PTG may cause excessive and uneven resin removal, especially near the furcation, and may lead to root fragility and procedural errors.

Multifunctional coatings of nickel-titanium implant toward promote osseointegration after operation of bone tumor and clinical application: a review.

Metal implants, especially Ni-Ti shape memory alloy (Ni-Ti SMA) implants, have increasingly become the first choice for fracture and massive bone defects after orthopedic bone tumor surgery. In this paper, the internal composition and shape memory properties of Ni-Ti shape memory alloy were studied. In addition, the effects of porous Ni-Ti SMA on osseointegration, and the effects of surface hydrophobicity and hydrophilicity on the osseointegration of Ni-Ti implants were also investigated. In addition, the effect of surface coating modification technology of Ni-Ti shape memory alloy on bone bonding was also studied. Several kinds of Ni-Ti alloy implants commonly used in orthopedic clinic and their advantages and disadvantages were introduced. The surface changes of Ni-Ti alloy implants promote bone fusion, enhance the adhesion of red blood cells and platelets, promote local tissue regeneration and fracture healing. In the field of orthopaedics, the use of Ni-Ti shape memory alloy implants significantly promoted clinical development. Due to the introduction of the coating, the osseointegration and biocompatibility of the implant surface have been enhanced, and the success rate of the implant has been greatly improved.

Development and characterization of smart composites reinforced with fibrillated cellulose and nickel-titanium alloy.

The current study presents the synergistic effects of fibrillated cellulose (FC) and nickel-titanium (NiTi) alloy on the performance properties of smart composites. Epoxy resin was reinforced with loadings of 1 %, 3 %, and 5 % FC and 3 % NiTi. The composites were produced using the casting method. The morphological properties have been analyzed using scanning electron microscopy (SEM). For mechanical properties, yield strength, modulus of elasticity, hardness, and impact energy were determined. The corrosion rate was determined via electrochemical corrosion testing. The recovery test was used to measure the shape-memory of the composites. The self-healing of the artificial defect in the composites was observed using a thermal camera. The yield strength, modulus of elasticity, hardness, and impact energy of composites reinforced with 5 % FC and 3 % NiTi increased by 168.2 %, 290 %, 33.3 %, and 114.3 %, respectively, compared to pure epoxy resin. There has been a 56.3 % decrease in the corrosion rate. The percentage of composites that returned from the final state to the original state after a deformation was 4 %. Self-healing analysis revealed that the scratch defect in composites was healed after 24 h. It is concluded that smart composites can be used in the aviation and automotive industries.

Revolutionizing endodontics: Advancements in nickel-titanium instrument surfaces.

Nickel-titanium (NiTi) instruments have become the backbone of endodontics due to their exceptional properties, superelasticity, and shape memory. However, challenges such as unexpected breakage, poor cutting efficiency, and corrosion have prompted researchers to explore innovative surface modifications to enhance their performance. This comprehensive review discusses the latest advancements in NiTi metallurgy and their impact on rotary NiTi file systems. Various surface treatment techniques, including ion implantation, cryogenic treatment (CT), thermal nitridation, electropolishing, and physical or chemical vapor deposition, have been investigated to minimize defects, boost surface hardness, and improve cyclic fatigue resistance. Ion implantation has shown promise by increasing wear resistance and cutting efficiency through nitrogen ion incorporation. Thermal nitridation has successfully formed titanium nitride (TiN) coatings, resulting in improved corrosion resistance and cutting efficiency. CT has demonstrated increased cutting efficiency and overall strength by creating a martensite transformation and finer carbide particles. Electropolishing has yielded mixed results, providing smoother surfaces but varying impacts on fatigue resistance. Physical or chemical vapor deposition has proven effective in forming TiN coatings, enhancing hardness and wear resistance. Furthermore, the concept of surface functionalization with silver ions for antibacterial properties has been explored. These advancements present an exciting future for endodontic procedures, offering the potential for enhanced NiTi instruments with improved performance, durability, and patient outcomes.