Anatomical Variations in Mandibular Molars: Focus on Midmesial Canals.

Endodontic therapy focuses on the root canal system to treat infected or damaged pulp tissue within the tooth, ultimately preserving the tooth and restoring its function. The root canal space should be cleaned with the use of proper instruments and chemical disinfectants to eradicate infected pulpal tissue and its remnants. The failure of endodontic therapy is attributed to a lack of understanding of the differences in anatomy among teeth, as evidenced by research. Canals are identified, and endodontic treatment is facilitated by the use of dental operating microscopes. Therefore, to achieve a favorable endodontic result, it is imperative to use all available methods to identify additional aberrant root canals. Failure to detect and adequately treat the midmesial canal (MMC) can lead to persistent infection, treatment failure, and the need for retreatment. This case underscores the importance of meticulous assessment and advanced techniques in treating complex canal configurations, ultimately leading to favorable outcomes in endodontic therapy. The MMC, a challenging anatomical feature, was located through careful clinical and radiographic examination. Advanced techniques, including ultrasonic activation and meticulous instrumentation, were employed to navigate and clean the canal effectively. Sodium hypochlorite irrigation and passive ultrasonic activation were utilized for thorough disinfection. The MMC was sealed with biocompatible materials, ensuring comprehensive obturation of the root canal system.

Comparative Evaluation of Volume and Homogeneity of Obturation with Four Different Obturation Systems Using Micro-Computed Tomography: An In vitro Study.

Aim: To evaluate and compare volume and homogeneity of the three different root canal obturation systems. Materials and Methods: Single-rooted premolar (n = 24) teeth samples were selected, and crowns were removed for standardization. Four groups are divided randomly as (n = 6), namely: For group I (single-cone gutta-percha obturation), group II (Beefill 2 in 1 obturation), group III (GuttaCore obturation), group IV (GuttaFlow bioseal obturation) and the root canal were subjected to prepare till X3 (protaper next) and subjected to micro-CT imaging. After completion of obturation, the image was taken by using micro-CT imaging. This is to evaluate the volume of filled obturation material in the canal space and the voided area sections, viz. the apical, middle, coronal, and third sections. Results: Group III (GuttaCore obturation) showed the least significant mean of the difference in relation to the volume of the canal obturation (81.148). The least mean significant difference in area of voids in the canal region for apical (0.00133), middle (0.00233), and coronal thirds (0.00533). The most statistically significant difference is in the apical and middle thirds root canal space. Conclusion: All the experimental groups showed significant differences in volume and voids in the obturation at three different levels, and the GuttaCore obturation systems occupied more of the volume with less voids in the prepared root canal space.

Evaluation of Different Root Canal Sealers on Post Operative Pain in Single Visit RCT - A Comparative Study.

Aim: To evaluate and compare three different root canal sealers (Endo-Sequence BC, Bio Root RCS and Zinc Oxide Eugenol) on post operative pain in single visit root canal therapies. Material and Methodology: 60 subjects with age ranging from 18-60 years were randomly selected depending upon the inclusion criteria. The subjects were then divided into three groups with 20 patients in each. In all the patients' single visit root canal treatment was done followed by obturation using different sealers. In Group I Endo- Sequence sealer was used, in Group II Bio-Root RCS and in Group III Zinc Oxide Eugenol sealers were used respectively. Results: statistically significant results were obtained on comparing the efficacy of three groups with Group I proving to be much effect among the three. Conclusion: within the limitation of the study it can be concluded that though all the sealers were effective in reducing post-operative pain, patients with Endo Sequence BC sealers evaluated statistically significant results.

Assessment of Two Different Obturation Systems in Primary Teeth: A Comparative Study.

Aim: The purpose of this study was to evaluate the efficacy of two distinct obturation techniques in primary teeth. Materials and Methods: For this investigation, 40 primary molar teeth were taken into consideration. Every sample underwent sample preparation. All teeth were evenly split into two groups: Group 1-obturation using the lentulospiral method and Group 2-obturation using the NaviTip method. The comparison between the two procedures was established through radiographic evaluation of the obturation quality and voids in the obturated canals. Results: In the lentulospiral method, 12 (60%) were optimal filling, 6 (30%) were underfilling, and 2 (10%) were overfilling. In the lentulo spiral method, 40% voids were present, and in the NaviTip method, 15% voids were present. Conclusion: The present study concluded that the NaviTip syringe method was sufficiently effective in regulating voids and yielded the best results for the apical seal, whereas the lentulo spiral approach generated the best results in terms of length of obturation.

New Frontiers in Endodontics: Tackling the Mesiobuccal 2 (MB2) Canal Challenge in the Maxillary First Molar.

Molars have been observed to have a variety of morphological forms. The least understood and most treatable tooth in the posterior region is the upper first molar. The maxillary first molar has a complex anatomy with a wide variation in the number, size, and shape of the root canals. The case documentation highlights the endodontic treatment of the upper first molar with an anomalous position of the mesiobuccal 2 (MB2) canal. Endodontic therapy success is contingent upon the awareness of the dentist about the differences i.e. morphology and outline of the root and its canal.

Effects of Access Cavity Design and Placement Techniques on Mineral Trioxide Aggregate Obturation Quality in Simulated Immature Teeth: A Micro-Computed Tomography Study.

Background and Objectives: In teeth with open apices, performing single session apexification is a challenging treatment due to the difficulty in handling mineral trioxide aggregate (MTA). Minimally invasive approaches in dentistry have also influenced the cavity designs in endodontics. Until now, different techniques have not been investigated in addition to manual condensation during the process of placing MTA in traditional (TradACs) or conservative (ConsACs) endodontic access cavities. The aim of this in vitro study was to compare and evaluate the obturation quality of MTA apical plugs placed with different techniques in TradACs or ConsACs. Materials and Methods: Sixty upper central teeth were divided into two main groups based on cavity design, and then each main group was further divided into three subgroups according to MTA placement techniques (n = 10): TradAC-manual, TradAC-manual + indirect ultrasonic activation, TradAC-manual + XP-endo Shaper (XPS), ConsAC-manual, ConsAC-manual + indirect ultrasonic activation, and ConsAC-manual + XPS. Subsequently, the porosity percentages in the MTA apical plug were analyzed using micro-computed tomography. The statistical analysis was performed using the Kruskal-Wallis H test and Mann-Whitney U test. Statistical significance was set at p < 0.05. Results: There were differences in volume of porosity percentages (%) according to cavity designs and MTA application techniques (p < 0.05). Except for the XPS group, more porosity was observed in ConsACs compared to TradACs. In TradACs, the significantly lowest open and total porosity was observed in the manual, ultrasonic, and XPS techniques, respectively. In ConsACs, the significantly lowest porosity was observed in the manual, XPS, and ultrasonic techniques, respectively (p < 0.05). Conclusions: In MTA obturation, cavity designs and application techniques had an impact on the MTA porosity. Creating an apical plug in ConsACs may result in more porosity compared to TradACs, especially when manual or indirect ultrasonic activation is preferred. Opting for the manual technique alone may be considered sufficient for controlling porosity for both TradACs and ConsACs.

Micro-CT evaluation of the presence of voids in endodontic obturation.

Identifying the presence, size, type and location of voids in an endodontic obturation is of great clinical importance because it enables evaluation of the three-dimensionality of the sealing techniques, which can be related to the success of the endodontic treatment. AIM: To analyze by micro-CT the presence of voids in lower single-rooted premolar root canal obturations prepared using the single cone and ultrasound vibration technique. MATERIALS AND METHODS: Twenty extracted single-rooted lower premolars were selected, and the root canal prepared surgically and chemically. In GROUP 1 - Without Vibration, the canal was obturated with a single cone and bioceramic, without applying vibration. In GROUP 2 - With Vibration, the gutta-percha cone inside the root canal was held with a cotton plier to which ultrasound vibration was applied for 3 periods of 3 seconds each. A micro-CT scanner was used to acquire and reconstruct images for analysis. RESULTS: No significant difference was found between obturation techniques, though there were differences between thirds, with the cervical third having a higher percentage of voids than the middle and apical thirds. CONCLUSIONS: The results suggest that the volume of closed, open and total voids does not differ between treatments with and without ultrasound vibration. In the cervical third, the highest volume of voids was related to oval geometry in the teeth evaluated.

La presencia de vacíos en la obturación endodóntica, su tamaño y el tipo y localización tiene gran importancia clínica ya que permite evaluar la tridimensionalidad de las técnicas de sellado y relacionarlas con el éxito del tratamiento endodóntico. OBJETIVO: analizar mediante microtomografía la presencia de vacíos en la obturación del conducto radicular de premolares inferiores unirradiculares, utilizando la técnica de cono único y vibración con ultrasonido. MATERIALES Y MÉTODOS: se seleccionaron 20 premolares inferiores unirradiculares a los que se les realizó la preparación quirúrgica y química del conducto radicular. Se realizó la obturación con cono único y biocerámico GRUPO 1- sin vibración. En el GRUPO 2 - con vibración se aplicó vibración por ultrasonido, se tomó del cono de gutapercha colocado en el interior del conducto con pinza de algodón que fue vibrada durante 3 períodos de 3 segundos cada uno. Las mismas fueron adquiridas y reconstruidas en un microtomógrafo para posterior análisis de las imágenes obtenidas. RESULTADOS: No se evidenciaron diferencias significativas entre ambas técnicas de obturación comparadas, pero si entre los tercios analizados, siendo el cervical el que mayor porcentaje de vacíos presenta en comparación a los cortes correspondientes al tercio medio y apical. CONCLUSIONES: Los resultados sugieren que el volumen de vacíos cerrados, abiertos y total no varía en los tratamientos donde se aplica vibración por ultrasonido. En el tercio cervical, el mayor volumen de vacíos se relaciona con la geometría oval que presentaron las piezas dentarias evaluadas en este estudio.

Quality analysis of four filling techniques in ovoid root canals prepared with M® instruments

Aims: This study aimed to assess the quality of various filling techniques in ovoid root canals prepared using M® instruments. Materials and Methods: Sixty ovoid root canals underwent endodontic treatment with M® instruments and were subsequently divided randomly into four experimental groups, each employing a different obturation technique: TU - single cone; TL - active lateral condensation; TH - Tagger hybrid; TS - Schilder technique. Digital radiographs were taken in both mesiodistal and buccolingual directions to examine the filled teeth. The percentage of filling material and empty spaces was quantified using Photoshop® software. Data were subjected to statistical analysis using the one-way ANOVA test and T test (? = 0.05). Results: In the TL and TS groups, there was a significantly lower average percentage of unfilled spaces compared to the TU and TH groups (P<0.0001). When analyzing the radiographic directions, the mesiodistal view exhibited the highest mean percentage of unfilled spaces, with differences in filling quality observed only in the TU and TL groups. Conclusions: Active lateral condensation and Schilder techniques demonstrated superior performance in achieving effective filling of ovoid root canals.

Post-operative pain in non-surgical root canal treatment after sealer-based obturation versus warm vertical compaction: A randomized clinical trial.

AIM: Post-operative pain may occur after non-surgical root canal treatment (NSRCT). The root filling technique and choice of sealer may be contributing factors. This randomized controlled clinical trial compared post-operative pain and analgesics intake after NSRCT using a sealer-based obturation technique (SBO) with single-cone gutta-percha and calcium silicate sealer (CSS) versus a warm-vertical compaction (WVC) technique with gutta-percha and a resin-based sealer (RBS). METHODOLOGY: This study was designed as a parallel-two arm, double-blind, randomized superiority clinical trial registered at www. CLINICALTRIALS: gov (NCT04753138). Patients referred for NSRCT fulfilling the inclusion criteria participated in this study. Pre-operative periapical radiographs and CBCT scans were taken and numerical rating scale (NRS) pain scores were recorded. Upon completion of canal instrumentation, participants were randomly allocated to either Group SBO: SBO with CSS or Group WVC: Warm-vertical compaction with RBS. Post-operative pain and analgesics intake were recorded at 1, 3 and 7 days after endodontic treatment completion. Non-parametric Mann-Whitney U and Friedman tests and a generalized estimating equation were used to assess differences in pain scores between the groups, within each treatment group at different time points and for correlations, respectively. RESULTS: The study included 195 participants (212 teeth). One participant declined to submit the NRS form. Therefore, 194 participants (211 teeth) were included in the final analysis (99.5% response rate). No statistically significant differences in post-operative pain or analgesic intake existed between the two groups at any time point (p > .05). Age, pre-operative pain, apical diagnosis and post-operative analgesic intake were significantly related to post-operative pain (p < .05). CONCLUSIONS: Sealer-based obturation technique with CSS was associated with similar post-operative pain levels and analgesics intake as WVC with RBS. Regarding post-operative pain, SBO with CSSs may be a suitable clinical alternative.

Comparación de la microfiltración apical de cuatro tipos de cementos endodónticos: Endofill, mtaFillapex, Adseal y Roeko Seal / Comparison of the Apical Microleakage of Four Types Of Endodontic Cements: Endofill, mta Fillapex, Adseal and Roeko Seal / Comparação da microinfiltração apical de quatro tipos de cimentos endodônticos: Endofill, mta Fillapex, Adseal e Roeko seal

Introducción: La microfiltración apical es uno de los principales causantes de fracasos endodónticos donde hay invasión de bacterias y líquidos periapicales a la parte interna del conducto radicular y material de relleno. Materiales y Métodos: La muestra estuvo conformada por 60 dientes premolares unirradiculares que fueron seccionados en la unión amelocementaria, la instrumentación biomecánica se realizó con técnica rotatoria e irrigación con hipoclorito de sodio al 5.25% y EDTA 17%, se dividió aleatoriamente en 4 grupos (n=15) para cada tipo de cemento, la obturación se realizó con la técnica de condensación lateral, a nivel coronal se obturó con Ionómero vidrio base y resina, se colocaron en una incubadora a 37° sumergidos en NaCL 0.9% por 5 días hasta el fraguado de los cementos, para observar la microfiltración se utilizó el método filtración de tinta china y la diafanización con la técnica de Robertson. Las medidas de microfiltración apical se observaron utilizando el Estereomicroscopio. Resultados: El valor promedio fue menor para el cemento Adseal 0,33mm, seguido por los cementos Fillapex 0,87mm, Roeko seal 1,00mm y Endofill 1,30mm respectivamente. Hubo diferencias estadísticamente significativas en la microfiltración apical de los cuatro cementos endodónticos (p=0.00) Conclusiones: El cemento Adseal presentó menor microfiltración en comparación a los cementos Fillapex, Roeko seal y Endofill.

Introduction: Apical microleakage is one of the main causes of endodontic failure, either due to invasion of microorganisms or periapical fluids into the canal, and only the composition of the type of obturator cement favors its reduction. The objective of this research was to compare the apical microleakage of four types of endodontic cements Endofill, MTA Fillapex, Adseal and Roeko Seal. Materials and methods: The sample consisted of 60 single root premolar teeth that were sectioned at the cement- enamel junction, the biomechanical instrumentation was performed with a rotary technique and irrigation with sodium hypochlorite and edta, randomly divided into 4 groups (n = 15) for each type of cement, the obturation was performed with the lateral condensation technique, at the coronal level it was obturated with base glass ionomer and resin, they were placed in an incubator at 37° submerged in NaCL 0.9% for 5 days until setting. of the cements, to observe the microleakage the India ink filtration method was used and diaph-anization with the Robertson technique. Apical microleakage measurements were observed using the Stereomicroscope. Results: The average value was lower for the Adseal 0.33 mm cement, followed by the Fillapex 0.87 mm, Roeko Seal 1.00 mm and Endofill 1.30 mm cements respectively. There were sta-tistically significant differences in the apical microleakage of the four endodontic cements (p = 0.00) Conclusions: Adseal cement presented less microfiltration compared to Fillapex, Roeko Seal and Endofill cements

Introdução: a microinfiltração apical é uma das principais causas de falhas endodônticas onde há inva-são de microrganismos e líquidos periapicais ao interior do conducto e só a composição do tipo de cimento obturador favorece sua disminuição. O objetivo desta pesquisa foi comparar a microinfiltração apical de quatro tipos de cimentos endodônticos Endofill, MTA Fillapex, Adseal e Roeko Seal. Materiais e métodos: a amostra foi composta por 60 dentes pré-molares uniradiculares que foram seccionados na junção amelocementária. A instrumentação biomecânica foi realizada com técnica rotatória e irrigação com hipoclorito e edta, sendo dividida aleatoriamente em 4 grupos (n = 15) para cada tipo de cimento. A obturação foi realizada pela técnica de condensação lateral, no nível coronal foi obturado com base de ionômero de vidro e resina, foram colocados em incubadora a 37° submersos em NaCl 0,9% por 5 dias até a pega dos cimentos. Para observar a microfiltração utilizou-se o método de filtração em tinta nan-quim e diafanização pela técnica de Robertson. As medidas de microinfiltração apical foram observadas utilizando o estereomicroscópio. Resultados: o valor médio foi menor para o cimento Adseal (0,33 mm), seguido pelos cimentos Fillapex (0,87 mm), Roeko Seal (1,00 mm) e Endofill (1,30 mm), respectivamente. Houve diferenças estatisticamente significativas na microinfiltração apical dos quatro cimentos endo-dônticos (p = 0,00). Conclusões: o cimento Adseal apresentou menor microinfiltração comparado aos cimentos Fillapex, Roeko seal e Endofill.

Assessment of dental students' knowledge and performance of master gutta-percha cone selection and fitting during root canal treatment: a pilot study.

BACKGROUND: Misconceptions should be detected early in dental students' training to improve their clinical performance. Accordingly, this study aimed to assess undergraduate dental students' knowledge and performance of master gutta-percha (GP) cone selection and fitting during clinical endodontic courses at the College of Dentistry, King Saud University. METHODS: Ninety-nine undergraduate dental students completed an online survey about their knowledge of master GP cone selection. Forty-five of these students were observed by faculty members in clinical endodontic courses while they fitted master GP cones during root canal treatments. The observers recorded the details of each student's cone-fitting techniques. The data were analysed using t-tests, one-way analysis of variance, and chi-square tests (p < 0.05). Inter- and intra-observer reliability were tested using Fliess' Kappa. RESULTS SURVEY: All participants had good knowledge of over-extended cone management, while 80.8% knew how to properly manage a short cone. The proper flaring assessment method was selected by 86.9% of the female and 34.2% of the male students, and this difference was statistically significant (p = 0.0001). OBSERVATION: The students labelled the working length on the master GP cone with an indentation in 64.4% of the cases and by bending the cone 35.6% of the time. Of all students, 84.4% encountered an apical stop, and this rate correlated significantly with the length of the cone on the master apical cone radiograph (p = 0.001). Improper shaping of the canal was the most common cause of ill-fitting cones (83.3%), while 16.7% of the students chose the wrong cone size. The final obturation length was adequate in 80% of the cases; 57.8% of the students were helped by instructors. CONCLUSIONS: Most students had the basic knowledge required to solve problems related to the selection of master GP cones. However, in the clinical setting, more than half of the students required the assistance of an instructor to adjust their cone's fit. The presence of an apical stop had the most significant effect on the length of the fitted master GP cone on radiography. The most common cause of ill-fitting master cones was improper shaping of the canal.

Periapical Healing Outcome of Endodontic Re-Treatment Using Calcium Silicates Versus Resin-Based Sealers: A Systematic Review.

Aim: This systematic review was conducted with the purpose of analyzing the effects of root-end sealers in endodontic re-treatment cases and comparing calcium-based sealers with sealers, which were resin-based. Methodology: We conducted this review based on the principles of Cochrane systematic type of studies and also based on guidelines of Preferred Reporting Items for Systematic Review and Meta-Analyses (PRISMA). An exhaustive search was conducted across PubMed, Medline, and Embase databases for the studies, which were based on root end sealers in cases of endodontic re-treatments. The data were then analyzed statistically with the help of SPSS 25.0. Results: It was seen that when comparing pain levels in post-obturation cases with these sealers after 24 hours and 48 hours, not much of statistically noteworthy differences were evident. Mean difference (MD) values at 24 hours were -0.20 with confidence intervals between -0.44 and 0.07 and P value of 0.15, whereas in case of 48 hours, MD was -0.36, CI- 0.65, and P value was 0.03. However, the results were slightly better with calcium-based sealers. Conclusion: Calcium silicate-based root end obturation sealers had similar performance when compared to resin-based sealers when we compared variables like pain intensity, etc.

A Comparative Evaluation of Fracture Resistance of Endodontically Treated Teeth Using Different Post-Obturation Restorative Materials: An In Vitro Study.

This in vitro study was conducted to evaluate and compare the fracture resistance of endodontically treated teeth using different post-obturation restorative materials. Seventy-five non-carious extracted human teeth were collected. Access opening, chemicomechanical preparation, and obturation were done. Teeth were randomly divided into various groups depending on the type of post-endodontic restoration: group I-control group, group II-Tetric-N-Flow Bulk Fill, group III-Tetric-N-Flow Bulk Fill + everX Posterior, group IV-P60, and group V-P60 + everX Posterior. The fracture resistance of each sample was measured using the universal testing machine. Results: The results obtained were subjected to statistical analysis. This demonstrated that group III (Tetric-N-Flow Bulk Fill + everX Posterior) was shown to be the most effective group followed by group V (Filtek P60 + everX Posterior) out of all of the other restorative experimental groups. Conclusion: Tetric-N-Flow Bulk Fill + everX Posterior showed maximum fracture resistance among the experimental groups.

Effect of Obturation Techniques on the Quality of Root Canal Fillings: A Systematic Review and Meta-analysis of in Vitro Studies.

Introduction: The current study aimed to compare the quality of root canal obturation performed with cold lateral condensation with other obturation techniques. Materials and Methods: Diverse Search was conducted using six electronic/academic databases following PICOS (i.e. population, intervention, control, outcomes, and study design) strategy: (P) Extracted mature permanent teeth; (I) Obturation techniques except for cold lateral condensation; (C) Cold lateral condensation tyechnique; (O) Quality of root canal obturation; and (S) In vitro studies assessing parameters using micro-computed tomography. The statistical method used for the meta-analyses was the "inverse variance DerSimonian-Laird test". The heterogeneity data was calculated using the T2, Cochran Q test, and I2 statistics. Results: Fifteen studies were included for the final analysis; one had a low risk of bias, eight a moderate risk, and six a high risk of bias. Ten studies were selected for meta-analyses; three studies comparing cold lateral condensation with carrier-based gutta-percha techniques [P=0.96; mean difference (MD)=-0.02; confidence interval (CI): (-0.77, 0.73); I2=21%]; three comparing cold lateral condensation with single-cone techniques [P=0.75; MD=-0.39; CI: (-2.77, 1.99); I2=92%]; two comparing cold lateral condensation and thermo-plasticized injectable techniques [P=0.37; MD=5.91; CI: (-7.13,18.94); I2=99%]; and five comparing cold lateral condensation with warm vertical condensation techniques [P<0.0001; MD=5.29; CI=(2.84, 7.74); I2=92%]. The overall effect reported significant results [P=0.0003; MD=2.69; CI=(1.23, 4.16); I2=96%]; favoring fewer voids and gaps for the other used obturation techniques. Conclusions: Cold lateral condensation and single-cone techniques presented no statistical differences. Nonetheless, Warm vertical condensation technique had better results compared to cold lateral condensation.

Comparative evaluation of resin-based sealers and bioceramic sealers for postoperative pain after endodontic treatment: A systematic review.

The systematic review aimed to compare and evaluate the effect of resin-based sealers and bioceramic sealers on postoperative pain after endodontic treatment. Two reviewers independently conducted electronic search in PubMed, the Web of Science, ScienceDirect, the Wiley Online Library, SpringerLink, Google Scholar, and the Cochrane Library, employing a complete dual-review process to ensure the inclusion of all relevant studies in the review. The search was carried out until November 2021. After selecting eligible studies, the risk of bias assessment was carried out using the revised Cochrane risk-ofbias tool for randomized trials (RoB 2). A total of 1,931 studies were identified from the electronic search, and finally 10 studies were included after full-text assessment. In all our included studies, the visual analog scale (VAS) was used for recording pain scores. Most of the studies recorded pain intensity starting from 6 h to 7 days. The results showed that there was no significant difference between resin-based sealers and bioceramic sealers in terms of incidence or intensity of postoperative pain at any point in time.

Micro-computed tomographic evaluation on the quality of single-cone obturation using a modified passive-deflation sealer injection needle: an in vitro study.

OBJECTIVES: This study aimed to design a modified passive-deflation sealer injection needle and investigate its ability to improve obturation quality of single-cone technique through assessing the distribution of voids in root canals using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty-eight mandibular incisors were divided into eight groups (n = 6), according to the taper of root canal preparation (0.06 or 0.04), the needle used for sealer injection (modified or commercial iRoot SP injection needle), and the obturation method (iRoot SP sealer-only or single-cone obturation). After obturation, each specimen was scanned by micro-CT. The volumetric percentage and distribution of all voids were first analyzed and compared among groups, then the open and closed voids were separately analyzed and compared among single-cone obturation groups. RESULTS: Compared to commercial needle groups, modified needle groups showed much less voids, especially in the apical root canal part (P < 0.05). Besides, the modified needle groups produced much less open voids than commercial needle groups despite the root canal taper (P < 0.05). CONCLUSIONS: The modified passive deflation sealer injection needle could effectively improve the quality of single-cone obturation through reducing intra-canal voids, especially open voids throughout the root canal, thus might possibly be developed as an effective intra-canal sealer delivering instrument.

Epoxy vs. Calcium Silicate-Based Root Canal Sealers for Different Clinical Scenarios: A Narrative Review.

This study aimed to review the considerations for choosing a suitable sealer according to various endodontic scenarios. An electronic search of PubMed, Scopus, and the Web of Science was undertaken for the keywords of 'sealer choosing', 'appropriate sealer', 'suitable sealer', 'sealer for clinical scenario', and 'sealer for clinical situations'. However, the literature review revealed a lack of studies with practical clinical recommendations regarding the choice of appropriate endodontic root canal sealers for particular clinical situations of root canal treatment. Therefore, a narrative review was undertaken under the basis of the characteristics of an epoxy resin-based sealer (ERS) versus a calcium silicate-based sealer (CSS). Based on the evidence found through the review, the choice of an appropriate sealer in a variety of clinical scenarios was proposed. An ERS is recommended for one-visit non-vital cases, teeth with periodontal involvement, cracked teeth, and internal root resorption without root perforation. A CSS is recommended for vital or non-vital cases in multiple visits, teeth with internal root resorption with perforation or internal approach for external cervical resorption, teeth with open apices, and teeth with iatrogenic aberrations.

40-Year Outcome of Old-School, Non-Surgical Endodontic Treatment: Practice-Based Retrospective Evaluation.

(1) Background: Non-surgical endodontic treatment has been shown to be clinically successful; however, clinical long-term data are scarce. This practice-based retrospective clinical investigation evaluated endodontic outcomes over 40 years and identified relevant clinical co-factors. (2) Methods: Two experienced dental practitioners in two different private dental practices treated 174 patients with 245 teeth from 1969 to 1993. After root canal obturation, either a new direct restoration (amalgam, resin composite, or glass-ionomer cement) or the re-cementation of a pre-existing prosthetic restoration or renewal of prosthetic restoration followed. Metal posts (operator A) or metal screws (operator B) were inserted when coronal substance loss was significant. The primary outcome (i.e., tooth survival) was achieved when the endodontically treated tooth was, in situ, painless and had full function at the end of the observation period. A secondary outcome, the impact of different prognostic factors on survival rate, was evaluated. (3) Results: The overall mean survival was 56.1% of all treated teeth after 40 years of clinical service, resulting in an annual failure rate of 1.1%. Most investigated clinical co-factors (jaw, tooth position, intracanal dressings, post/screw placement, and gender) showed no significant influence on survival. (4) Conclusions: Even with materials and techniques from the 1970s and 1980s, successful root canal treatment was achievable. Except for post-endodontic restorations, most of the evaluated factors had no significant influence on the clinical long-term survival of root canal-treated teeth.

Physicochemical Changes in Root-Canal Sealers under Thermal Challenge: A Comparative Analysis of Calcium Silicate- and Epoxy-Resin-Based Sealers.

INTRODUCTION: We compared the effects of heat on the physicochemical properties of recently developed calcium silicate-based sealers (CSBSs), including BioRoot Flow, BioRoot RCS, and AH Plus Bioceramic sealer, with those of the epoxy-resin-based sealer (ERBS) AH Plus. METHODS: The flow, film thickness, setting time, and solubility of sealers were evaluated at 37 °C and 100 °C using ISO 6876/2012. Furthermore, pH and calcium ion release were evaluated at these temperatures. In addition, the mass change in sealers at a high temperature was assessed via thermogravimetric analysis. Then, the chemical composition and components of the sealers were analyzed using a scanning electron microscope and Fourier-transform infrared spectroscopy (FTIR). RESULTS: BioRoot Flow, AH Plus Bioceramic, and AH Plus complied with ISO standards in terms of flow and film thickness, both before and after heat application. However, BioRoot RCS exhibited significantly increased film thickness at 100 °C. The setting times of all sealers were significantly reduced at 100 °C. The solubility of CSBS was >3%, exceeding the ISO 6876/2012 standard, both before and after heat exposure. Conversely, the solubility of AH Plus complied with the standard, regardless of the thermal condition. For 4 weeks, CSBS showed a significantly higher pH than AH Plus at both 37 °C and 100 °C. After heat treatment, calcium release decreased in Bioroot RCS and BioRoot Flow, while AH Plus showed no significant differences before and after treatment. However, CSBS consistently exhibited significantly higher calcium release than AH Plus at both temperatures. An FTIR analysis revealed that the chemical composition of the sealers did not change at the high temperature, whereas a thermogravimetric analysis demonstrated a >5% weight reduction in CSBS and a 0.005% weight reduction in AH Plus at 100 °C. CONCLUSIONS: BioRoot Flow, AH Plus Bioceramic, and AH Plus possess favorable physicochemical properties, which make them suitable for application under thermal conditions. At a high temperature, BioRoot RCS did not exhibit changes in its chemical composition. However, its film thickness was increased, and pH and solubility were reduced. Therefore, caution is needed when it is applied at high temperatures, such as during the warm obturation technique.

Maxillary interim obturator prosthesis fabrication for a patient with limited mouth opening with a digital approach: A clinical report.

Squamous cell carcinoma is a common malignant condition affecting the oral cavity and may involve the surrounding maxillofacial regions. Treatment commonly involves resection of the tumor, followed by prosthetic rehabilitation of the resection defect. This clinical report presents a 62-year-old Asian male patient who had previously undergone surgical resection, resulting in a post-surgical Aramany Class II maxillary defect. The patient's medical history included severe trismus, characterized by restricted mouth opening, as well as a diagnosis of maxillary sinus verrucous squamous cell carcinoma. This report provides a comprehensive account of the rapid fabrication of an interim obturator using digitally assisted dentistry techniques.