Optimization and preparation of a compound cod liver oil film former agent: an orthogonal design.

Background: Cod liver oil has anti-inflammatory properties and could help regulate recurrent aphthous stomatitis (RAS). An orthogonal experiment was used to evaluate and improve the dosage form of compound cod liver oil, which has replaced the previously used liniment preparation based on film method. Methods: An orthogonal experiment was adopted, and the appearance and film-forming time of the film coating agents were used as indicators. The optimal ratio in the preparation process for the compound cod liver oil film agent was then optimized. A method for determination of compound cod liver oil film was established using High-Performance Liquid Chromatography (HPLC). Results: The results indicate that the blank films prepared using 55 mg polyvinyl alcohol (PVA) (PVA low), 45 mg of PVA (PVA medium), and 10 mg glycerol had the optimal performance, which was defined as PVAa. The drug-carrying film prepared from 3 mL PVAa (i.e., film-forming material with the optimal proportion), 30 mg dexamethasone acetate, and 30 mg metronidazole had the optimal performance. The verified sample has a complete and smooth appearance, uniform thickness and color, and no evident bubbles, which meets the requirements for a film agent defined in the Chinese Pharmacopoeia, 2020 edition. HPLC was used to determine the major components: dexamethasone acetate, metronidazole, and dyclonine hydrochloride, and the optimal separation effect was obtained. The method has advantages of good specificity, good linear results, high recovery rate, and good repeatability. Conclusion: This study proposes an optimized compound cod liver oil film former agent and preparation method. The results indicate that the compound cod liver oil film former agent had good performance, reflecting the high feasibility of this research method. The detection method of compound cod liver oil film was established by HPLC. The method was feasible, and the validity and stability of the formulation and preparation technology were guaranteed. The role of the newly developed agent in patients with RAS should be investigated further.

The microclimate impact of treetop walk based on plant community simulation.

The treetop walk is an innovative urban greenway that harmoniously integrates with the natural topography, meandering through the tree canopy. It serves as a vital element in elevating the urban mountain landscape while also significantly impacting the recreational experiences of the public through its microclimate effects. Moreover, the distinctive plant community characteristics of the treetop walk significantly enhance the microclimate. Examining the plant community attributes that potentially influence the microclimate conditions of the treetop walk is of utmost importance. We chose the Fu Forest Trail in Fuzhou as the sample site for this research. By implementing an orthogonal experimental design and using ENVI-met software, we simulated data to explore the impacts of various plant community characteristics on the microclimate of the treetop walk in autumn. The findings revealed the following results: (1) The presence of tree height, leaf area index, crown type, and planting density significantly influenced the microclimate of the treetop walk green spaces, with some factors having primary effects while others having secondary effects. (2) No significant variations were observed in the microclimate effects of diverse plant community characteristics in the treetop walk during morning, noon, and evening hours. (3) Scheme 13 emerged as the optimal choice for cooling and humidifying ventilating, characterized by a tree height of 20 m, leaf area index of 4.4, spherical crown shape, and planting spacing of 2 m. The tree species available in the Fuzhou area include Ligustrum quihoui Carr., Buxus sinica, Laurus nobilis, Myrica rubra, and Osmanthus fragrans. (4) Compared to traditional understory trails, tree height and planting spacing notably influence the microclimate environment of the treetop walk.

Combined Astragalus, vitamin C, and vitamin E alleviate DEHP-induced oxidative stress and the decreased of insulin synthesis and secretion in INS-1 cells.

Di-(2-ethylhexyl)-phthalate (DEHP), a common Phthalic acid ester (PAEs), has been reported to be associated with diabetes mellitus, yet the underlying mechanisms remain unknown. Combined nutrient interventions have been shown to alleviate the diabetic toxicity of DEHP. However, the effects and mechanisms of the combined intervention of Astragalus and vitamins (C and E) are currently unknown. In this study, we investigated the potential mechanisms of DEHP-induced diabetes mellitus through transcriptome analysis and vitro experiments using rat insulinoma cells (INS-1 cells). Furthermore, we explored the protection of the combined Astragalus, vitamin C, and vitamin E on DEHP-induced diabetes mellitus through these mechanisms. INS-1 cells in the logarithmic growth period were exposed to 125 umol/L DEHP followed by high-throughput sequencing analysis. The cell proliferation inhibition rate was determined using MTT assay for each group, and the cell apoptosis rate and intracellular ROS level were measured using flow cytometer. Finally, insulin levels and markers of oxidative stress were detected using ELISA kits in different groups. A total of 372 differentially expressed genes were found between the 125 umol/L DEHP and control groups, subsequent functional enrichment analyses indicated that DEHP induced oxidative stress and disturbed insulin levels. In INS-1 cells, the rate of cell proliferation inhibition, apoptosis, and the degree of oxidative stress increased concentration-dependently with increasing DEHP concentrations, while antioxidant intervention could reverse these changes. Insulin synthesis and secretion decreased after 240 µmol/L DEHP exposure stimulated by 25 mM glucose in INS-1 cells, also could antioxidant intervention alleviate these reductions. Based on these results, the underlying mechanism of DEHP impairing the function of INS-1 cells might be through apoptosis pathways induced by oxidative stress and direct reduction of insulin levels (both synthesis and secretion), while the optimal combination of Astragalus and vitamins (C and E) could exert an alleviating effect.

Study on Proportioning Scheme of Coal System Rocky Similar Material Based on Orthogonal Test.

Similar materials play an important role in model testing. In order to meet the demand for similar materials in modeling tests, such as those on coal mining, coal system rocky similar materials were formulated using yellow sand as a coarse aggregate, heavy calcium carbonate as a fine aggregate, and cement and gypsum as binders. Based on the orthogonal experimental design method, four influencing factors, namely the aggregate-binder ratio, heavy calcium carbonate content, cement-gypsum ratio, and moisture content, were selected. Each factor was designed at five levels. Through weighing, uniaxial compression, Brazilian splitting, and variable-angle plate shear tests on 225 specimens under 25 different ratios, five physico-mechanical property indicators of the material, including density, compressive strength, tensile strength, cohesion, and internal friction angle, were obtained under different ratios. The test results indicate that the similar materials formulated with the above raw materials had a wide range of mechanical properties, which met the simulation needs of different types of coal rocks, such as main coking coal, anthracite, shale, etc., in the similar model test. Range analysis was adopted to analyze the sensitivities to each factor, which showed that the density and internal friction angle of similar materials are mainly controlled by the aggregate-binder ratio; the cement-gypsum ratio mainly controls the compressive strength, tensile strength, and cohesion of the material. Analysis of variance (ANOVA) was adopted to analyze the sensitivities to each factor, which showed that the aggregate-binder ratio had a highly significant effect on the density of the material, the cement-gypsum ratio had a highly significant effect on the compressive and tensile strength of the material, the cement-gypsum ratio had a significant effect on the cohesion and density of the material, and the moisture content had a significant effect on the compressive strength of the material. The remaining factors did not significantly affect the material parameters. The results of this study can provide some reference for the selection of coal system rocky similar materials in subsequent physical modeling tests.

Ultrahigh-acetone-sensitivity sensor based on Pt-loaded TiO2porous nanoparticles synthesized via a facile hydrothermal method.

A simple hydrothermal method based on an orthogonal experimental design was used to synthesis Pt-loaded TiO2mesoporous nanoparticles in one step. The successful synthesis of Pt-loaded TiO2nanoparticles was demonstrated by various characterization methods. The effects of the modification of Pt and its explanation are described in detail by means of the test results. Through systematic gas-sensing tests, we found that the Pt-loaded TiO2nanoparticles outperform pure TiO2nanoparticles, with a high response value (S= 42.5) to 200 ppm acetone at 260 °C and with a film thickness of 0.45 mm, far superior to that of pure TiO2. The response time (8 s) and recovery time (11 s) of the material are also relatively good with excellent selectivity and long-term stability (30 days). The frequent use of acetone as an organic solution in factories and laboratories, as well as the possibility of making a preliminary diagnosis of diabetes by detecting acetone levels in exhaled gas, make this work promising for environmental monitoring and medical diagnosis.

Finite Element Parametric Design of Hallux Valgus Orthosis Based on Orthogonal Analysis.

OBJECTIVE: To design appropriate orthosis for hallux valgus, a difficult foot condition that affects a quarter of the body's bones, we need to clarify the numerical biomechanical features, which have not been established in previous biomechanical studies. Therefore, we constructed a finite element model of the bunion foot to investigate the orthopaedic force compensation mechanism. METHODS: A patient with moderate hallux valgus was recruited. CT imaging data in DICOM format were extracted for three-dimensional foot model reconstruction. In conjunction with the need for rapid design of bunion orthosis, a metatarsal force application sizing method based on an orthogonal test design was investigated. The orthogonal test design was used to obtain the hallux valgus angle (HVA) and the inter metatarsal angle (IMA) data for different force combinations. Based on the extreme difference analysis and analysis of variance of the test results, the influence of different force combinations on the bunion angle was quickly determined. RESULTS: The results showed that the stress concentration occurred mainly in the first metatarsal bone. The distribution trend was in the medial and lateral middle of the bone and gradually decreased to the dorsal base of the bone body. The greatest stress occurs in the cartilage between the phalanges and metatarsals. In 25 groups of simulation experiments, HVA was reduced from 27.7° to 13°, and IMA was reduced from 12.5° to 7.3°. CONCLUSION: Applying detailed orthopaedic force collocation to the first metatarsal column can effectively restore the mechanics and kinematics of hallux valgus, and provide a reference for the treatment of bunion valgus and the design of orthopaedic devices.

Monte Carlo-based optimization of glioma capsule design for enhanced brachytherapy.

The use of radiotherapy in tumor treatment has become increasingly prominent and has emerged as one of the main tools for treating malignant tumors. Current radiation therapy for glioma employs 125I seeds for brachytherapy, which cannot be combined with radiotherapy and chemotherapy. To address this limitation, this paper proposes a dual-microcavity capsule structure that integrates radiotherapy and chemotherapy. The Monte Carlo simulation method is used to simulate the structure of the dual-microcavity capsule with a 125I liquid radioactive source. Based on the simulation results, two kinds of dual-microcavity capsule structures are optimized, and the optimized dual-microcavity capsule structure is obtained. Finally, the dosimetric parameters of the two optimized dual-microcavity capsule structures are analyzed and compared with those of other 125I seeds. The optimization tests show that the improved dual-capsule dual-microcavity structure is more effective than the single-capsule dual-microcavity structure. At an activity of 5 mCi, the average absorbed dose rate is 71.2 cGy/h in the center of the optimized dual-capsule dual-microcavity structure and 45.8 cGy/h in the center of the optimized single-capsule dual-microcavity structure. Although the radial dose function and anisotropy function exhibite variations from the data of other 125I seeds, they are generally similar. The absorbed dose rate decreases exponentially with increasing distance from the center of the capsule, which can reduce the damage to the surrounding tissues and organs while increasing the dose. The capsule structure has a better irradiation effect than conventional 125I seeds and can accomplish long-term, stable, low-dose continuous irradiation to form local high-dose radiation therapy for glioma.

Optimization of Cu/Sn Alloy Sputtering Process Based on Orthogonal Experimental Design Method.

The performance of supercapacitors is directly influenced by the conductivity of polypyrrole, which serves as the electrode material. In order to balance considerations of cost-effectiveness and conductivity, this study employs magnetron sputtering to fabricate a copper-tin alloy layer as the conductive layer for polypyrrole. The deposition of a copper-tin alloy film through magnetron sputtering has a significant impact on the polymerization effect of pyrrole as well as being a crucial factor influencing the performance of supercapacitors. Various parameters, including working pressure, sputtering time, and sputtering power, affect the conductivity of the copper-tin alloy film. Furthermore, the degree of influence of each parameter on the conductivity of the copper-tin alloy film varies. This study utilizes an orthogonal experimental design to investigate the impact of various factors and levels on the conductivity and uniformity of a metal film. The objective is to optimize the process parameters for the creation of a copper-tin alloy film with desirable characteristics. Experimental results indicate that the working voltage, sputtering time, and sputtering power significantly influence the coefficient of variation, deposition rate, target current, and operating voltage of the film. Furthermore, FT-IR, XRD, and SEM tests are conducted on samples prepared using the identified optimal process parameters. In addition, we demonstrate various approaches to enhance the experiment's reliability. The findings indicate that the most favorable process parameters for achieving optimal results are a working pressure of 0.065 Pa, a sputtering time of 20 min, and a sputtering power of 70 W. It was observed that the sputtering time significantly influences the uniformity of the copper-tin alloy film, whereas the sputtering power has a minimal impact on its uniformity. The deposition rate is primarily influenced by the working pressure, with the greatest effect observed. Conversely, the sputtering time has the least impact on the deposition rate. Similarly, the target current is predominantly affected by the sputtering power, exhibiting the greatest influence, while the sputtering time has the least effect. Furthermore, the working voltage is most significantly influenced by the working pressure, whereas the sputtering time has the least impact on the working voltage.

Optimization of a tri-drug treatment against lung cancer using orthogonal design in preclinical studies.

A growing body of evidence suggests that anesthetics impact the outcome of patients with cancer after surgical intervention. However, the optimal dose and underlying mechanisms of co-administered anesthetics in lung tumor therapy have been poorly studied. Here, we aimed to investigate the role of combined anesthetics propofol, sufentanil, and rocuronium in treating lung cancer using an orthogonal experimental design and to explore the optimal combination of anesthetics. First, we evaluated the effects of the three anesthetics on the proliferation and invasion of A-549 cells using Cell Counting Kit 8 and Transwell migration and invasion assays. Subsequently, we applied the orthogonal experimental design (OED) method to screen the appropriate concentrations of the combined anesthetics with the most effective antitumor activity. We found that all three agents inhibited the proliferation of A-549 cells in a dose- and time-dependent manner when applied individually or in combination, with the highest differences in the magnitude of inhibition occurring 24 h after combined drug exposure. The optimal combination of the three anesthetics that achieved the strongest reduction in cell viability was 1.4 µmol/L propofol, 2 nmol/L sufentanil, and 7.83 µmol/L rocuronium. This optimal 3-drug combination produced a more beneficial result at 24 h than either single drug. Our results provide a theoretical basis for improving the efficacy of lung tumor treatment and optimizing anesthetic strategies.

Effect of different waste plastic modifiers on conventional asphalt performance: optimal preparation parameters determination and mechanism analysis.

The typical treatment of waste plastics has become a global environmental problem. In light of recent developments, waste plastics used as asphalt modifiers offer an efficient approach to solve this problem. This paper studied the effects of three kinds of waste plastic-modified asphalts (WPMA), with polypropylene (PP), polyethylene (PE) and ethylene-vinyl acetate copolymer (EVA) as their respective modifiers, on the conventional asphalt performance. Furthermore, an orthogonal experimental design (OED) was used to determine the preparation parameters of WPMA. Thereafter, thermogravimetric-differential scanning calorimetry (TG-DSC) and Fourier transform infrared spectroscopy (FTIR) were employed to expound the mechanism of WPMA. It was then subsequently ascertained that the optimum preparation parameters of PP-modified asphalt (PPMA) and PE-modified asphalt (PEMA) were 170 °C, 3000 rpm, and 30 min, while the optimum preparation parameters of EVA-modified asphalt (EVAMA) were 180 °C, 3000 rpm, and 30 min. In addition, WPMA displayed better high-temperature performance and are inherently more suitable for pavement in high-temperature regions. Ultimately, this study will effectively solve the disposal of waste plastic and promote the research and application of WPMA in the future.

Transcriptional and Physiological Analysis Reveal New Insights into the Regulation of Fertilization (N, P, K) on the Growth and Synthesis of Medicinal Components of Dendrobium denneanum.

Dendrobium denneanum is an important medicinal and ornamental plant. Its ornamental and medicinal values are affected by its vegetative growth conditions and chemical composition accumulation. This study adopted an orthogonal experimental design to treat D. denneanum with nine different levels of nitrogen (N), potassium (K), and phosphorus (P). The morphological indicators of the plant were positively correlated with the nitrogen concentration. The polysaccharide content was the highest at 1500 mg·L-1 nitrogen and 3000 mg·L-1 phosphorous and was 26.84% greater than the control. The flavonoid content increased by 36.2% at 500 mg·L-1 nitrogen, 2000 mg·L-1 phosphorous, and 300 mg·L-1 potassium. Principal component score analysis showed that nitrogen had the most significant impact on the various indicators of D. denneanum, followed by phosphorus and potassium. The comprehensive score showed that the T9 treatment (N: 1500 mg·L-1, P: 3000 mg·L-1, K: 500 mg·L-1) had the strongest effect on D. denneanum. Transcriptional analysis showed that compared with the control, the T9 treatment led to 2277 differentially expressed genes (1230 upregulated and 1047 downregulated). This includes fifteen genes enriched in the MAPK signaling pathway, five genes in phenylpropanoid biosynthesis, and two genes in flavonoid biosynthesis. These genes may be involved in regulating plant growth and the biosynthesis of polysaccharides and flavonoids. This study provides guidance for the optimal use of N, P, and K in the cultivation of D. denneanum.

Effects of Rare Earth Oxides on the Mechanical and Tribological Properties of Phenolic-Based Hybrid Nanocomposites.

The incorporation of rare earth oxides and nano-silica has been found to significantly enhance the mechanical and tribological characteristics of phenolic-based hybrid nanocomposites. In this work, the impact of these additives was investigated through single-factor experiments. The study revealed that cerium oxide and yttrium oxide were the primary factors influencing changes in the impact strength, shear strength, coefficient of friction, and wear rate. Additionally, the content of nano-silica exerted the most substantial influence on the hardness and compressive strength of the specimens. Furthermore, the material ratios of the phenolic-based hybrid nanocomposites were optimized using an orthogonal experimental design and a fuzzy comprehensive evaluation method. The optimal material ratio for these nanocomposites was determined to be 2% cerium oxide, 2.5% yttrium oxide, and 3% nano-silica, based on their mechanical, frictional, and wear properties. This research provides valuable insights for the development of new brake friction materials with low friction and high wear resistance and contributes to meeting the demand for polymer composites with superior mechanical performance in diverse applications.

A Quantitative Study of Micro and Macro Mechanical Parameters Based on the PFC3D Flat-Joint Model.

The flat-joint model, which constructs round particles as polygons, can suppress rotation after breakage between particles and simulate more larger compression and tension ratios than the linear parallel-bond model. The flat-joint contact model was chosen for this study to calibrate the rock for 3D experiments. In the unit experiments, the triaxial unit was loaded with flexible boundaries, and the influence of each microscopic parameter on the significance magnitude of the macroscopic parameters (modulus of elasticity E, Poisson's ratio ν, uniaxial compressive strength UCS, crack initiation strength σci, internal friction angle φ and uniaxial tensile strength TS) was analysed by ANOVA (Analysis of Variance) in an orthogonal experimental design. Among them, Eƒ, kƒ has a significant effect on E; Cƒ and kƒ have a significant effect on ν; Cƒ, σƒ and kƒ have a significant effect on UCS; Cƒ; σƒ and Eƒ have a significant effect on TS; Rsd has a significant effect on σci; and φf, Eƒ, kƒ, µƒ, and σƒ have a significant effect on φ. Regressions were then carried out to establish the equations for calculating the macroscopic parameters of the rock material so that the three-dimensional microscopic parameters of the PFC can be quantitatively analysed and calculated. The correctness of the establishment of the macroscopic equations was verified by comparing the numerical and damage patterns of uniaxial compression, Brazilian splitting, and triaxial experiments with those of numerical simulation units in the chamber.

Effects of multiple indoor environmental factors on anaerobic exercise performance.

Indoor stadium is an important place for physical exercise and sports practice, but few studies have considered the impact of indoor environment on exercise performance. Anaerobic exercise refers to exercise with high load intensity and instantaneous intensity. Many kinds of exercise performance are closely related to anaerobic exercise. Therefore, the purpose of this study was to examine the influence of temperature, relative humidity and CO2 concentration on anaerobic exercise performance. Sixteen healthy participants (21.5 ± 3.5 years) performed Wingate anaerobic test in 9 cases under the orthogonal experimental design. Temperature is a significant factor affecting peak power (p < 0.05) and average power (p < 0.05). The peak power at 22 °C and 25 °C is 5.4% and 5.1% higher than that at 28 °C, and the average power at 22 °C and 25 °C is 4.2% and 4.3% higher than that at 28 °C. Besides, temperature affected overall environmental satisfaction before and after exercise (p < 0.005, p < 0.005) as well as ear temperature in sedentary state and after warm-up exercise (p < 0.005, p < 0.005). The range of 22 °C-25 °C is closer to the neutral temperature, and it is suitable for anaerobic exercise. However, we did not find that changes in relative humidity and carbon dioxide concentration had an effect on anaerobic exercise performance.

Optimal NPK Fertilizer Combination Increases Panax ginseng Yield and Quality and Affects Diversity and Structure of Rhizosphere Fungal Communities.

Soil microorganisms affect crop rhizospheres via the transformation and transport of nutrients, which has important influences on soil fertility, carbon sequestration, and plant yield and health in agroecosystems. There are few reports on the effects of fertilizer application on the growth of Panax ginseng (C. A. Mey.) or the structure of its rhizosphere microbial communities. In this study, an orthogonal experimental design was used to explore the effects of nine different combinations of nitrogen (N), phosphorus (P), and potassium (K) fertilizers with different amounts and proportions on ginseng growth and accumulation of ginsenosides and the structure of rhizosphere soil fungal communities. Soil without fertilization was the control. With the combined application of NPK, ginseng growth and development increased. The fertilization scheme N3P1K3, with N fertilizer at 50 g·m-2, P fertilizer at 15 g·m-2, and K fertilizer at 60 g·m-2, had the most comprehensive benefit and significantly increased ginseng rhizome biomass and ginsenoside contents (Rg1, Re, Rf, Rg2, Rb1, Ro, Rc, Rb2, Rb3, and Rd). Amplicon sequencing showed that NPK application increased the diversity of fungal communities in ginseng rhizospheres, whereas richness was bidirectionally regulated by proportions and amounts of NPK. Ascomycota was the dominant fungal phylum in ginseng rhizosphere soil, and relative abundances decreased with combined NPK application. Combined NPK application increased the relative abundance of potential beneficial fungi, such as Mortierella, but decreased that of potentially pathogenic fungi, such as Fusarium. Correlation analysis showed that potential beneficial fungi were significantly positively correlated with ginseng rhizome yield and ginsenoside contents, whereas the opposite relation was observed with potential pathogenic fungi. Thus, in addition to directly increasing crop growth, precise NPK application can also increase crop adaptability to the environment by shaping specific microbial communities. The results of this study suggest that the combined effects of biotic and abiotic processes on agricultural production determine crop yield and quality.

Optimization of decellularized liver matrix-modified chitosan fibrous scaffold for C3A hepatocyte culture.

Hepatocyte scaffold is an essential part in bioartificial liver device. We have designed a novel hepatocyte scaffold based on porcine liver extracellular matrix (ECM) and chitosan (CTS) fabrics. This CTS-ECM scaffold can improve cell adhesion and proliferation. In the present study, an orthogonal test was designed to optimize the CTS/ECM composite scaffold, in which ECM concentration, EDC concentration and EDC to NHS ratio were taken as factors, proportion of nitrogen element and hydroxyproline content as indicators. The cytocompatibility of the novel scaffold for C3A hepatocytes was analyzed in vitro. The orthogonal test demonstrated that the optimal scaffold should be based on ECM concentration of 5 mg/mL, EDC concentration of 5 mg/mL, and EDC to NHS ratio 1:1. C3A hepatocytes cultured on the optimized CTS-ECM scaffolds showed stronger proliferation and functionality than those on Cytodex3 microcarriers (p < 0.05). The CTS/ECM composite scaffold may be widely used as a promising hepatocyte culture carrier, especially in bioartificial liver support systems.

Investigation of Adhesion Properties of Tire-Asphalt Pavement Interface Considering Hydrodynamic Lubrication Action of Water Film on Road Surface.

To obtain the tire−pavement peak adhesion coefficient under different road states, a field measurement and FE simulation were combined to analyze the tire−pavement adhesion characteristics in this study. According to the identified texture information, the power spectral distribution of the road surface was obtained using the MATLAB Program, and a novel tire hydroplaning FE model coupled with a textured pavement model was established in ABAQUS. Experimental results show that here exists an "anti-skid noncontribution area" for the insulation and lubrication of the water film. Driving at the limit speed of 120 km/h, the critical water film thickness for the three typical asphalt pavements during hydroplaning was as follows: AC pavement, 0.56 mm; SMA pavement, 0.76 mm; OGFC pavement, 1.5 mm. The road state could be divided into four parts dry state, wet sate, lubricated state, and ponding state. Under the dry road state, when the slip rate was around 15%, the adhesion coefficient reached the peak value, i.e., around 11.5% for the wet road state. The peak adhesion coefficient for the different asphalt pavements was in the order OGFC > SMA > AC. This study can provide a theoretical reference for explaining the tire−pavement interactions and improving vehicle brake system performance.

Orthogonal Experimental Study on Concrete Properties of Machine-Made Tuff Sand.

Machine-made sand instead of natural sand has become an inevitable choice for the sustainable development of the concrete industry. Orthogonal experiment and grey correlation analysis were used to investigate the performance of machine-made tuff sand concrete. The optimal concrete mix ratio of machine-made sand was obtained by orthogonal test and its working performance was verified. Grey correlation analysis was applied to compare the factors affecting the mechanical properties of the machine-made sand concrete. The test results show that the sand rate has the greatest degree of influence on slump and slump expansion. The mineral admixture has the greatest effect on the 7-day compressive strength of the concrete. Additionally, the water-cement ratio has the greatest influence on the 28-day compressive strength. The mechanical and working properties of the machine-made sand concrete reach the optimum condition when the mineral admixture is 20%, the sand rate is 46%, the stone powder content is 10% and the water-cement ratio is 0.30. Comparing different fine aggregate concretes of similar quality, we conclude that the mechanical and working properties of tuff sand concrete and limestone sand concrete and river sand concrete are similar. The compressive strengths of the mechanism concrete show the greatest correlation with roughness and the least correlation with stone powder content. The stone powder content has almost no effect on the compressive strength of concrete when the stone powder content does not exceed a certain range. The results of the study point out the direction for the quality control of concrete with machine-made sand.

An Investigation of the Properties of Expanded Polystyrene Concrete with Fibers Based on an Orthogonal Experimental Design.

Expanded polystyrene (EPS) concrete is commonly used as the core material of commercial sandwich panels (CSPs). It is environmentally friendly and lightweight but has poor strength. Adding fibers can improve the microstructure of EPS concrete and reduce the weakening effect of EPS beads on the mechanical properties of concrete. An orthogonal experimental design (OED) was used in this paper to analyze the influence of length and content of polypropylene fiber (PF), glass fiber (GF), and carbon fiber (CF) on the physical and mechanical properties and micromorphology of EPS concrete. Among them, CFs have the most apparent impact on concrete and produce the most significant improvements in all properties. According to the requirements of the flexural performance of CSPs, the splitting tensile strength was taken as the optimization index, and the predicted optimal combination (OC) of EPS concrete with fibers was selected. The variations in the material properties, mechanical properties, and microstructure with age were analyzed. The results show that with increasing age, the dry density, compressive strength, and splitting tensile strength of concrete are markedly improved relative to those of the CSP core material and the control case (CC), and even the degree of hydration is improved.

A composite System Combining Self-Targeted Carbon Dots and Thermosensitive Hydrogels for Challenging Ocular Drug Delivery.

We developed a composite system combining self-targeted carbon dots and thermosensitive in situ hydrogels for ocular drug delivery of diclofenac sodium (DS). DS-CDC-HP nanoparticles were prepared by loading DS on the surface of CDC-HP via electrostatic interactions. An orthogonal experimental design was selected to screen the optimal thermosensitive hydrogel matrices and then DS-CDC-HP nanoparticles were embedded to form the composite system. The physicochemical properties and release behavior of this system were characterized, and in vivo fluorescence imaging was carried out. Corneal penetrability and in vitro cellular studies (cytotoxicity, cell imaging and cell uptake) were performed to test the feasibility and potential of this ocular delivery system. Finally, the optimal gel matrix consisting of Poloxamer 407: Poloxamer 188: HPMC E50 was 21:1:1 (w/v %), and the gelation temperature before adding artificial tear fluid was 26.67°C and 34.29°C, respectively. This system has the characteristics of biphasic drug release. In addition, the corneal penetrability and in vivo fluorescence study indicated that corneal transmittance was enhanced and drug retention time was extended. Cellular studies revealed that the DS-CDC-HP-Gel has good cytocompatibility and CD44 targeting. In summary, this composite system combines carbon dots with hydrogels, offering new potential for ocular drug delivery.