Addition of nisin to high-viscosity glass-ionomer cement: a comparative in vitro study on antibacterial and physical properties.

PURPOSE: Nisin is a lantibiotic effective against Gram-positive microorganisms such as Streptococcus mutans. The study aimed to determine the effect of the addition of nisin to high-viscosity glass-ionomer cement (HVGIC) on its antibacterial activity, setting time, surface microhardness, and compressive strength. METHODS: 1 and 3% w/w nisin were added to HVGIC before mixing. Unmodified HVGIC was the control. Agar disc diffusion, direct contact test, and scanning electron microscopy (SEM) analysis were used to evaluate antibacterial activity against S. mutans. Setting time, surface microhardness, and compressive strength were measured using Gilmore needle apparatus, digital microhardness tester, and universal testing machine, respectively. Statistical analysis included Student's t test, one-way ANOVA with Tamhane's post hoc test, and repeated-measures ANOVA. RESULTS: As evidenced by the agar disc diffusion (p < 0.001), direct contact tests (p = 0.025), and SEM analysis of the S. mutans cell count and cell surface area (p = 0.049 and 0.003), 3% nisin had the strongest antibacterial activity. There was a dose-dependent increase in setting time (p = 0.005) and surface microhardness (p = 0.006), with no significant difference in compressive strength compared to control. CONCLUSION: The addition of 3% nisin to HVGIC enhances the antibacterial action against S. mutans and surface microhardness without adversely affecting setting time and compressive strength.

Assessment of enamel surface roughness and hardness with metal and ceramic orthodontic brackets using different etching and adhesive systems: An in vitro study.

Background: This study aimed to evaluate enamel surface roughness and microhardness following the use of different bracket materials (metal or ceramic), etchants (total- and self-etchants), and adhesive systems (precoated or flash-free). Method: A total of 99 extracted human premolars were selected for the analysis. The surface roughness was first assessed (roughness control). One specimen from each subgroup was examined using a scanning electron microscope to illustrate the surface topography. Eighty-eight teeth were prepared using total- or self-etchants and bonded to precoated or flash-free adhesive metal or ceramic brackets. The remaining 11 specimens were not bonded to brackets (microhardness controls). The brackets were debonded after immersion in distilled water for 24 h. The specimens were again scanned for surface roughness and topography imaging. Finally, the microhardness was assessed using a micro-Vickers hardness test at a force of 200 g for 10 s. Result: An overall statistically significant increase in surface roughness and reduced surface microhardness were observed in all experimental groups when compared with those in the control groups. The etchant type was the only variable found to contribute to the measured surface properties, with increased roughness and reduced microhardness introduced by total-etching compared to those by self-etching. Conclusion: Orthodontic brackets introduced a significant increase in enamel surface roughness and reduce microhardness compared with untreated enamel, regardless of the bracket material, etchant type, and adhesive system. The etchant type was the only variable contributing to these changes, with total etching having a more pronounced effect.

Validation and reliability of the Glittre-ADL test to evaluate functional capacity in older adults

INTRODUCTION: The decline in functional capacity (FC) interferes with the functional independence of older adults, so it is important to assess the FC and use appropriate instruments for this. OBJECTIVE: To investigate the Glittre Activities of Daily Living (ADL) test's validity and reliability for assessing functional capacity in older adults. METHODS: Cross-sectional study with a sample of 100 elderly (68 ± 5.16 years). To assess the convergent validity, the Six-Minute Walk Test (6MWT) and the Timed Up and Go Test (TUG) were performed. The intra-examiner test-retest of the Glittre-ADL test was performed on the same day with a 30-minute interval between repetitions and inter-examiner reliability with an interval of seven days. RESULTS: There was a strong correlation between the Glittre-ADL test and the 6MWT (r=-0,75; p<0.001) and the TUG (r=0.77; p<0.001). The intra-examiner and inter-examiner reliability was excellent (ICC)=0.91 and 95% CI=0.14-0.97; p<0.001 and ICC=0.91; 95% CI: 0.86-0.94; p<0.001, respectively). CONCLUSION: The Glittre-ADL test demonstrated that it is valid and that its reliability is adequate to assess functional capacity in older adults.

Comparative of flexural strength, hardness, and fluoride release of two bioactive restorative materials with RMGI and composite resin

Aim: This study was fulfilled to evaluate the flexural strength, micro-hardness, and release of two fluoride ions of bioactive restorative materials (Cention N and Activa Bioactive), a resin modified glass ionomer (Fuji II LC), and a resin composite (Filtek z250). Methods: Forty samples from four restorative materials (Activa Bioactive, Fuji II LC, Cention N, and Filtek Z250) were provided according to the current standards of ISO 4049/2000 guide lines. Subsequently, the samples were stored for 24 hours and 6 months in artificial saliva, and successively, flexural strength and micro-hardness of the samples were measured. For each studied groups the pH was decreased from 6.8 to 4 in storage solution. The rate of changes in fluoride ion release was measured after three different storage periods of 24 hours, 48 hours, and 6 months in distilled water, according to the previous studies' method. Two-way ANOVA, One-way ANOVA, Tukey HSD Pair wise comparisons, and independent t-tests were used to analyze data (α= 0.05). Results: The highest flexural strength and surface micro-hardness after 24 hours and also after 6 month were observed for Cention N(p<0.001).Flexural strength of all samples stored for 6 months was significantly lower than the samples stored for 24 hours(p<0.001). The accumulative amount of the released fluoride ion in RMGI, after six-month storage period in distilled water was considerably higher (p<0.001) than 24 hours and 48 hours storage. The amount of fluoride ion release with increasing acidity of the environment (from pH 6.8 to 4) in Fuji II LC glass ionomer was higher than the bioactive materials (p<0.05). Conclusion: The flexural strength of RMGI was increased after storage against the Activa Bioactive,Cention N and Z250 composite. Storage of restorative materials in artificial saliva leads to a significant reduction in micro hardness. The behavior and amount of released fluoride ions in these restorative materials, which are stored in an acidic environment, were dependent on the type of restorative material

Olanzapine-induced acute necrotising pancreatitis leading to recurrent multiple organ dysfunction syndrome.

A married mother in her 50s acutely developed vomiting, diarrhoea and severe epigastric pain 2 weeks following discharge from an acute psychiatric inpatient unit. She presented to the emergency department complaining of a 2-day history of the above symptoms. Blood tests revealed neutrophilia, grossly raised inflammatory markers and amylase levels triple the normal range. Based on radiological investigations, she was treated for necrotising pancreatitis that quickly escalated to multi-system organ failure and a lengthy intensive care unit admission. Common causes of pancreatitis, including cholelithiasis, alcohol and other drugs, were ruled out. Despite this, she suffered recurrent episodes of pancreatitis with significant morbidity. Olanzapine, started during her psychiatric admission, was determined to be the offending agent. Two years following the discontinuation of olanzapine, the patient has had no further episodes of acute pancreatitis.

Effect of diphenyliodonium hexafluorphosphate in the yellowing and properties of experimental resin cements

Aim: The yellowing effect is undesirable and can occur in the dental restoration margins when light-cured resin cements containing camphorquinone as photoinitiator is used. This study aimed to evaluate the effect of diphenyliodonium hexafluorphosphate (DPI) in photoinitiator systems that contained different concentrations of camphorquinone (CQ) and dimethylamino ethyl benzoate (EDAB) on resin cements. Methods: A base (1:1) of bisphenol A diglycidyl methacrylate (BisGMA) and triethylene glycol dimethacrylate (TEGDMA) was obtained, and 60wt% of glass fillers was added. Eight formulations were obtained: RC1 (0.5mol% CQ / 1mol% EDAB), RC2 (0.5mol% CQ / 2mol% EDAB), RC3 (1mol% CQ / 1mol% EDAB), RC4 (1mol% CQ / 2mol% EDAB), and RC5 to RC8, which contained the same bases plus 0.5mol% DPI. Experimental resin cements were evaluated by the degree of conversion (DC), L*a*b* color analysis, water sorption (WS) and solubility (S), flexural strength, and Elastic Modulus. The data were analyzed by three-way ANOVA, Tukey's and Mann-Whitney tests (α = 0.05). Results: The combination of DPI and 0.5mol% CQ increased DC in RC6 and L* in RC5 without increasing the WS and a* b* values. CQ at 1mol% showed higher values of b* and lower values of a*, except for RC3. Groups with 2mol% EDAB showed higher DC. Conclusion: The addition of DPI reduces CQ, generating a decreased yellowing effect, while maintaining adequate properties in the resin cements, especially with 2mol% EDAB

Effects of Sleep on Balance Control and Reaction Time to Visual Stimuli / 수면정신생리

OBJECTIVES: To find evidence that sleep is necessary for normal brain function, thus indicating that declines in both sleep quality and quantity are related to worse performance of many daily tasks and deteriorated physical functions. The present study investigates the relationships of balance control and reaction time with sleep quality. METHODS: 58 healthy (male 20, female 38) volunteers with informed consent participated in this study. The Self-reported Pittsburgh Sleep Quality Index (PSQI) was used to evaluate sleep quality and relevant factors, and the subjects were divided into groups A (PSQI < 5) and B (PSQI ≥ 5) based on this index. Static balance control and reaction time to visual stimuli were conducted to assess their relationship with sleep quality. RESULTS: Group B exhibited excessive daytime sleepiness significantly more often compared to group A. Static balance control did not markedly change relative to sleep quality, but reaction time and error to visual stimuli were significantly increased in group B compared to group A. CONCLUSION: These findings indicate that a decline in sleep quality can result in delayed reactions, as well as decreased accuracy of these reactions. They also suggest that low sleep quality may be associated with changes in physical functions, including balance control through reduced selective attention.