Evaluating Effectiveness of Multi-Component Waste Plastic Bags on Bitumen Properties: Physical, Rheological, and Aging.

This study examines the applicability of an unknown composition waste plastic bag sample as bitumen modifier. The waste components were initially characterized to identify the type of plastics and the level of impurity. Asphalt binder performance was examined for rutting, thermal, and age resistance. The results revealed that the waste plastic bags, predominantly consisted of Low-Density Polyethylene (LDPE) and Linear Low-Density Polyethylene (LLDPE) and contained 6.1% impurities. The binder tests indicated that the waste plastic bags enhanced the rutting resistance of bitumen by one grade, with its modification more similar to LLDPE, rather than LDPE. The thermal degradation and aging properties of the modified binders demonstrated that the bitumen modified by the waste plastic bags exhibited slightly lower resistance to temperature and aging compared to virgin LDPE and LLDPE. This was attributed to the impurities contained in the waste plastic. In conclusion, the analyzed waste plastic bags proved to be suitable for use in binder modification, presenting a viable alternative to virgin LLDPE.

A green approach for the automatic quantitative analysis of additives in plastic samples using in-tube extraction dynamic headspace sampling technique coupled to GC-MS/MS.

BACKGROUND: Many of the chemicals frequently used as additives have been recognised as hazardous substances, and therefore their analysis is necessary to evaluate plastic contamination risk. Additives analysis in plastic samples is usually performed by methods involving high volumes of toxic solvents or having high detection limits. In this work, a novel, fast, solventless and reliable green method was developed for the automated analysis of plastic additives from plastic samples. The proposed method consists of in-tube extraction dynamic headspace sampling (ITEX-DHS) combined with gas chromatography (GC) and mass spectrometry (MS/MS) determination. RESULTS: Several parameters affecting the ITEX-DHS extraction of 47 additives in plastic samples (including phthalates, bisphenols, adipates, citrates, benzophenones, organophosphorus compounds, among others) were optimised. The use of matrix-matched calibration, together with labelled surrogate standards, minimises matrix effects, resulting in recoveries between 70 and 128%, with good quantitation limits (below 0.1 µg g-1 for most compounds) and precision (<20%). The method proposed can be applied to any type of polymer, but due to the existence of the matrix effect, calibrates with the adequate matrix should be performed for each polymer. SIGNIFICANCE: This method represents an effective improvement compared to previous methods because it is fast, solvent-free, fully automated, and provides reliable quantification of additives in plastic samples.

Comparative Analysis of the Effects of Incorporating Post-Industrial Recycled LLDPE and Post-Consumer PE in Films: Macrostructural and Microstructural Perspectives in the Packaging Industry.

In accordance with the Circular Economy Package of the European directive, the Spanish government compels manufacturers of plastic bags to include into their products a minimum of 70% of polyethylene (PE) waste. Following this mandate can be challenging and requires a deep knowledge of the alterations produced by the recycling in the main components of a plastic bag film: lineal low-density polyethylene (LLDPE), the LLDPE recycled post-industry, generated as waste from an industrial process (rLLDPE) and the PE recycled from post-consumer use (rPE), that has been picked up, cleaned, and reprocessed. This study provides insight in the macro and microstructural changes produced by several cycles of recycling in these materials. Specimens in the form of film for supermarket bags formed with these polymers have been subjected to several recycling sequences. The process closely mimics industrial processes. Four cycles have been applied to the samples. The evolution of mechanical properties, including tensile strength, elongation at break, and tear and impact tests, shows an obvious decrease due to degradation that is not an impediment for practical use after the four cycles of recycling according to the main specifications defined by the producer. Colorimetric measurements reveal no significant variations in the color of the films. The results of the FTIR and TGA analysis show degradation phenomena and changes in crystallinity in branching and the apparition of crosslinking that are in consonance with the mechanical data. There is also a difference between both types of recycled PE. In general, rLLDPE is more affected by the recycling than rPE. According to our findings, the limiting property would be the tearing. By comparing these values with bags available in the market, manufactured from 70-80% recycled material, we can infer that while two reprocessing cycles can lead to good results, a maximum of four cycles of recycling is advisable.

Spallation and particles infusion into the extracorporeal circuit during CRRT: a preventable phenomenon.

Patients in intensive care are exposed to the risk of microparticle infusion via extracorporeal lines and the resulting complications. A possible source of microparticle release could be the extracorporeal circuit used in blood purification techniques, such as continuous renal replacement therapy (CRRT). Disposable components of CRRT circuits, such as replacement bags and circuit tubing, might release microparticles such as salt crystals produced by precipitation in replacement bags and plastic microparticles produced by spallation. In-line filtration has proven effective in retaining microparticles both in in-vitro and in-vivo studies. In our study, we performed an in-vitro model of CRRT-treatment with the aim of detecting the microparticles produced and released into the circuit by means of a qualitative and quantitative analysis, after sampling the replacement and patient lines straddling a series of in-line filters. Working pressures and flows were monitored during the experiment. This study showed that microparticles are indeed produced and released into the CRRT circuit. The inclusion of in-line filters in the replacement lines allows to reduce the burden of microparticles infused into the bloodstream during extracorporeal treatments, reducing the concentration of microparticles from 14 mg/mL pre in-line filter to 11 mg/mL post in-line filter. Particle infusion and related damage must be counted among the pathophysiological mechanisms supporting iatrogenic damage due to artificial cross-talk between organs during CRRT applied to critically ill patients. This damage can be reduced by using in-line filters in the extracorporeal circuit.

DNA recovery after sequential processing of latent fingerprints on black polyethylene plastic.

Latent fingerprints on plastic substrates can be visualized by using sequential treatments to enhance the contrast between the fingerprint residues and underlying substrate; however, the extent to which these processes affect subsequent DNA analysis is mostly unknown. Latent fingerprints deposited on black plastic by one donor were visualized with single-process fingerprint powders (i.e., white powder, bichromatic powder, or bichromatic magnetic powder) or sequential treatments (i.e., laser → reflected ultraviolet imaging system (RUVIS) → CA fuming → RUVIS → Rhodamine 6G, Ardrox, and MBD (RAM) or CA fuming → RAM/laser → bichromatic magnetic powder). Samples were examined after the addition of each treatment. DNA was collected using cotton swabs, extracted, quantified, and amplified. DNA yields, peak heights, number of alleles obtained, and percentage of DNA profiles eligible for CODIS upload were examined. Latent fingerprints processed with the laser and up to three sequential treatments generated DNA profiles with significantly higher peaks heights than those of the untreated samples. Fingerprints processed with the laser and up to two sequential treatments generated DNA profiles with significantly more alleles. All methods beginning with laser enhancement generated more CODIS-eligible profiles. Additional research is needed to determine the extent to which initial laser enhancement impacts the success of downstream DNA profiling results. Although DNA profile development is not guaranteed due to the variable quantities of DNA contained within latent fingerprints, the selection of an appropriate latent fingerprint visualization method could maximize both fingerprint detection and the generation of CODIS-eligible DNA profiles.

Review of the global evolution of regulations on single-use plastics and lessons drawn for Canada.

Plastic pollution is a global problem and many countries are strengthening their regulations to mitigate the related environmental degradation and health risks and to support the development and deployment of circular economy for various types of plastics. As Canada also develops its strategy for regulating single-use plastic as one element of the plastic pollution, aligned federal and provincial policies are essential. This study presents an analysis of existing and emerging policies to provide guidance on Canada's future regulations. Qualitative and quantitative data regarding plastic regulations were gathered from similar countries including Australia, the United Kingdom, the European Union, the United States and relevant scientific articles. Analysis was also conducted of current Canadian regulations that both impact and guide the path for plastic regulation, international examples provided guidance for future Canadian regulations. The analysis found that there is a need for public education on the gravity of plastic pollution to gain their support; for establishing pioneering provinces or cities in plastic regulations to learn from and provide other cities with support; and to start with banning items with available alternatives, to be followed by phasing out other items that are more difficult to replace. The study also showed potential areas of improvement in impact data. The need for reliable regulatory performance data against a baseline scenario; consistency in methodology; and proper scoping to reduce the risk of displacement or exclusivity in policy were identified.

Caracterización epidemiológica y hallazgos en homicidios por sofocación con bolsas de plástico en la ciudad de Medellín, Colombia 2008-2021 / Epidemiological characterization and findings in homicides due to suffocation with plastic bags in the city of Medellín, Colombia 2008-2021

Introducción el presente estudio describe las características de las víctimas de muertes por sofocación homicida con bolsas de plástico en el período comprendido entre 2008 y 2021, en necropsias practicadas en el Instituto Nacional de Medicina Legal y Ciencias Forenses de la ciudad de Medellín. Materiales y métodos se realizó un estudio descriptivo, retrospectivo, cuya información se obtuvo a partir de los informes de necropsia realizados por médicos forenses de la institución. Resultados de las 38.772 necropsias realizadas, 17.703 fueron homicidios de las cuales 96 (0,54%) fueron debidas a la utilización de bolsas de plástico para producir la muerte. De los 96 casos analizados el 92,7% (89) correspondieron a hombres y el 7,3% (7) a mujeres. La población masculina joven de los 15 a 27 años fue la más afectada; el 74,4% (71) ingresaron como cadáveres no identificados y en el 17,1% (14) fue considerado el diagnóstico de tortura dentro del análisis de la necropsia médico legal. Los hallazgos de sofocación en el examen externo fueron congestión facial 67,1% (55), petequias en las conjuntivas 63,4% (52), petequias en la cara 28,0% (23), lesiones en la mucosa oral interna 61,0% (50) y excoriaciones en las comisuras labiales 25,6% (21) por el uso de elementos extraños en la cavidad oral o la aplicación de maniobras asfícticas. El 58,5% (56) presentaban signos de trauma en otros sitios del cuerpo que no explicaban en sí la causa de la muerte. El 36,4% (35) presentaban bolsas de plástico cubriendo la cabeza y ajustadas al cuello con algún elemento, el 32,3% (31) cinta trasparente adherida a la bolsa plástica que cubría la cabeza y el 31,3% (30) presentaban una película plástica de nombre comercial Vinipel MR. El 76,8% (73) tenían las manos y los pies atados al momento del hallazgo del cuerpo en la escena. Conclusión ... (AU)

Introduction This study describes the characteristics of the victims of deaths by homicidal suffocation with plastic bags in the period between 2008 and 2021, in autopsies performed at the National Institute of Legal Medicine and Forensic Sciences of the city of Medellín. Materials and methods A descriptive, retrospective study was carried out, whose information was obtained from the autopsy reports made by forensic doctors of the institution. Results Of the 38,772 autopsies performed, 17,703 were homicides, of which 96 (0.54%) were due to the use of plastic bags to produce death. Of the 96 cases analyzed, 92.7% (89) corresponded to men and 7.3% (7) to women. The young male population between the ages of 15 and 27 was the most affected; 74.4% (71) entered as unidentified corpses and in 17.1% (14) the diagnosis of torture was considered within the analysis of the legal medical necropsy. The findings of suffocation in the external examination were facial congestion 67.1% (55), petechiae in the conjunctivae 63.4% (52), petechiae on the face 28.0% (23), lesions in the internal oral mucosa 61.0% (50), and abrasions in the labial commissures 25.6% (21) due to the use of foreign elements in the oral cavity or application of asphyctic maneuvers. 58.5% (56) presented signs of trauma in other parts of the body that did not explain the cause of death. 36.4% (35) had plastic bags covering the head and adjusted to the neck with some element, 32.3% (31) transparent tape attached to the plastic bag that covered the head and 31.3% (30) presented a plastic film with the trade name Vinipel MR. 76.8% (73) had their hands and feet tied when the body was found at the scene. Conclusion This is the first step to obtain information on the characterization of individuals and their macroscopic findings related to homicide deaths due to suffocation with plastic bags, to warn about the actions of organized criminal groups and their practices in the transnational ... (AU)

Indigestible foreign bodies in the forestomach of slaughtered goats in Mogadishu, Somalia.

Background and Aim: The primary domestic animal in Somali communities is the goat. Their main economic importance is as a food source and a main form of agriculture in the country. There has been a recent decline in the goat population in Somalia, which may be due to the shortage of feed and an increasingly contaminated environment that is affecting the population's food supply and nutritional status. This study aimed to estimate the prevalence and the factors associated with indigestible foreign bodies (IFBs) ingestion in goats in Mogadishu, Somalia. Materials and Methods: A cross-sectional study was conducted at the Somalia Meat Company in Mogadishu, Somalia, in February 2022. A total of 250 goats were included in this study, and records were kept on age, sex, body condition, and location. Following the slaughter, goats were inspected for IFBs, and their stomach compartments were incised and examined. Indigestible foreign body classifications was noted and subjected to analysis using the Statistical Package for the Social Sciences version 26.0. Results: A total of 90/250 (36%; 95% confidence interval [CI]: 30.1-42.3) goats presented IFBs, being 71/90 (79%; 95% CI: 69-87) in the rumen, 12/90 (13%; 95% CI: 7-22) in the reticulum, and seven/90 (8%; 95% CI: 3-15) on both. The most observed IFBs were plastic in 71/90 (79%; 95% CI: 69-87), followed by ropes in eight/90 (10%; 95% CI: 5-18). A high IFB prevalence was observed in goats aged >2-≤3 years (44%), followed by >3 years (36%). The lowest frequency was observed in goats aged <2 years (30%). Overall, there was an association between IFBs in goats and poor body conditions (χ2 = 47%, p < 0.04). Conclusion: The absence of a plastic waste disposal system in the area, and communal free-grazing of livestock in highly contaminated sites, appeared to be significant contributors to the high occurrence of IFBs in goats. Therefore, appropriate policies for solid waste management should be implemented.

Optimistic narrative future visions: a communication tool for promoting sustainable (plastic) behavior.

Plastic pollution is a pressing global issue, necessitating a focus on consumer behavior to curb this problem at its source. To effectively promote sustainable practices, communication strategies that employ future visions have gained attention. This study examines the effects of a narrative video intervention depicting an optimistic future vision concerning single-use plastic bag consumption in South Africa, compared to a representation of the prevailing status quo. Using a preregistered within-subject design, we assess the psychological and emotional responses to two scenarios of which one is illustrating adaptive behaviors toward reduced plastic bag usage, and the other showcasing current consumption patterns. Parametric analyses revealed a shift in emotional states, characterized by a greater experience of positive emotions and a reduced experience of negative emotions following the exposure to the optimistic future scenario video, as compared to the status quo video. Moreover, engagement with the optimistic future scenario was associated with higher levels of perceived behavioral control and behavioral intentions. No significant changes were found regarding sense of responsibility. These findings point to the potential of optimistic future visions to influence individuals at psychological and emotional levels. This renders optimistic future vision communication as an effective tool for sustainable behavior change, particularly in relation to the sustainable use of plastic shopping bags.

Assessment of plastic pollution in coastal areas of Karachi: Case study of West Warf, Kemari Jetty, and Manora.

This study focused on marine pollution in coastal areas of Karachi, particularly West Warf, Kemari Jetty, and Manora. The research examined the sources and quantities of waste, from boat manufacturing, export units, and local commercial activities. Stakeholder interviews were conducted to understand waste management practices and identify the key contributors to ocean litter. The results indicated that restaurants, export units, boat construction, and tourist and commuter activities were the primary sources of marine pollution. Plastic was found to be the most prevalent litter category, with LDPE (e.g., single-use bags) and polystyrene (e.g., material in floating docks) being the most common types. Additionally, multi-layer packaging, such as chip wrappers, was frequently observed in the surveyed areas. Overall, this research highlights the urgent need for improved waste management and compliance measures in coastal regions to mitigate marine pollution.

A multi-jurisdictional study on the quantification of COVID-19 household plastic waste in six Latin American countries.

This study examines urban plastic waste generation using a citizen science approach in six Latin American countries during a global pandemic. The objectives are to quantify generation rates of masks, gloves, face shields, and plastic bags in urban households using online survey and perform a systematic cross-jurisdiction comparisons in these Latin American countries. The per capita total mask generation rates ranged from 0.179 to 0.915 mask cap-1 day-1. A negative correlation between the use of gloves and masks is observed. Using the average values, the approximate proportion of masks, gloves, shields, and single-use plastic bags was 34:5:1:84. We found that most studies overestimated face mask disposal rate in Latin America due to the simplifying assumptions on the number of masks discarded per person, masking prevalence rate, and average mask weight. Unlike other studies, end-of-life PPE quantities were directly counted and reported by the survey participants. Both of the conventional weight-based estimates and the proposed participatory survey are recommended in quantifying COVID waste. Participant' perception based on the Likert scale is generally consistent with the waste amount generated. Waste policy and regulation appear to be important in daily waste generation rate. The results highlight the importance of using measured data in waste estimates.

What not to do with dog poop.

This short communication paper comments on the controversial but highly unpleasant topic of littered plastic dog waste bags in the environment. Littered plastic dog waste bags are a source of plastic and microplastic pollution and dog faeces contained in these littered bags also pose human and ecological health risks. This short communication suggests that this littering may be occurring due to confusion by pet owners, who may believe that these so called 'biodegradable' bags are compositable, which in the absence of industrial composting facilities, are not. Thus, plastic dog waste bags continue to be a source of plastic and microplastic pollution in the environment long after they have been littered. All pet owners should deposit plastic dog poop bags in appropriate waste bins, not in the environment.

The effects of environmental information provision on plastic bag use and marine environment status in the context of the environmental levy in Greece.

The focus of this study is to examine the level of awareness, as well as the impacts of environmental information provision, regarding plastic bag consumption in Greece, taking into consideration the effects of plastic pollution in the marine environment within the framework of the environmental levy. This study was conducted through the use of two structured questionnaires as web-based surveys. The aim of both questionnaires was to explore citizen attitudes towards the marine environment in addition to their preferences with regard to the implementation of a program aimed at marine conservation and the reduction of plastic bag use. Data on plastic bag consumption at a national level were also incorporated. This research was carried out according to the contingent valuation method aimed at estimating citizen willingness-to-pay (WTP) on both structured questionnaires. The first questionnaire utilized the minimal legal WTP (ML-WTP) model resulting in 834 responses in total, while the second questionnaire applied a double-bounded dichotomous choice method and amassed 713 responses in aggregate. Based on the results of the first questionnaire, pre-existing environmentally friendly behaviour was further enhanced by the introduction of the environmental levy on plastic bags. The second questionnaire revealed that marine conservation is based both on collective as well as individual responsibility. This study provides evidence that the utilization of both economic and non-economic measures may be very effective in considerably reducing plastic bag consumption and its detrimental impact on the marine environment.

Rapid photo aging of commercial conventional and biodegradable plastic bags.

Biodegradable plastic (BPs) bags are introduced and widely used as alternatives to conventional commercial plastic bags in an effort to mitigate the adverse impacts of nondegradable (conventional) plastics. However, being used as packaging, the stability and safeness of the BPs and even the conventional plastics with photo irradiation in short duration remain unknown. In this study, we systematically explored the photo aging of commercial BPs bags and conventional plastic bags in film forms in both outdoor and laboratory experiments in short duration (~ one month) under the scenario of ordinary daily use. Conventional plastic bags (polyethylene (PE)) and BPs bags (hybrids of polylatic acid (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) with additives (Magadiite or Starch)) were investigated. In contrast with the visually negligible surface change of PE films in both outdoor and laboratory environments, obvious surface alteration as surface deterioration with cracks and holes was obtained for BPs from SEM images in direct irradiation by both natural and simulated sunlight. Consistently, AFM results also indicated that the surface of BPs had the tendency to be rougher after photo aging process. Further FTIR and XPS results demonstrated that though the visual surface alteration of conventional and biodegradable plastics are distinct, the mechanisms dominating the change of C-H/C-C bonds to carbon­oxygen functional groups (i.e., C-O/C=O/O-C=O) for both conventional plastics and BPs during the photo aging process are similar. Moreover, tensile strength tests demonstrated that BPs bags being easily broken compared with the conventional PE bags might attribute to the difference in their mechanical properties. The findings of this study suggest that the potential risk of MPs and NPs released from the BPs bags via photo aging process are great new threats to natural environment and even human health.

The road to sustainable use and waste management of plastics in Portugal.

As a European Union (EU) member, Portugal must comply with reductions in plastic waste. In Portugal, the 330 items/100 m of beach litter, comprising up to 3.9 million pieces and of which 88% is plastic, is higher than the EU median (149 items/100 m) and must be reduced to 20 items/100 m (94%). Integrative measures are needed to reduce littering and improve plastics' use and disposal under the circular economy. Of this 414 kt of plastic packaging waste, 163 kt were declared plastic packaging, 140 kt subjected to recycling, and 94 kt to energy recovery. The current recycling rate of plastic packaging (34%) should be improved to reach EU recycling averages (42%) and goals and to provide widespread benefits, considering revenues of 167 €/t. As a net importer of waste, Portugal could benefit from the valorization of imported waste. Besides increased recycling, pyrolysis and gasification could provide short-term alternatives for producing value-added substances from plastic waste, such as hydrogen, consistent with the National Plan of Hydrogen and improving ongoing regulations on single-use plastics. This manuscript provides an integrative view of plastics in Portugal, from use to disposal, providing specific recommendations under the circular economy. ELECTRONIC SUPPLEMENTARY MATERIAL: Supplementary material is available in the online version of this article at 10.1007/s11783-021-1439-x and is accessible for authorized users.

Anthropogenic litter in freshwater bodies and their estuaries: an empirical analysis in Lesvos, Greece.

The last decade increasing attention to litter accumulation in the marine environment revealed the issue of the terrestrial fluxes of plastic pollution into the oceans. However, limited studies investigate the macro-litter abundance and composition particularly in freshwater ecosystems and the adjusted coastal environment. In this study, we conducted an empirical analysis of anthropogenic litter (AL) in two freshwater streams and their estuaries of Lesvos island (Greece), strongly affected by the waste mismanagement in the Moria refugee camp. A total of 1,622 litter items were collected from five sites during the field campaign between the 3rd and 6th of June 2019. Among these, artificial polymer items (mainly drink bottles, single-use plastic bags, cutlery, and trays) irrespective of the site location constituted the major part ranging from 46 to 91% of total AL by mass. Drink bottles and plastic cutlery are found in higher percentage at Moria camp river and its estuary, while packaging and bag litter are more abundant at upstream sites. The operation of the camp has increased the AL abundance 13 times more than the reference site, causing severe threat to human health and to freshwater and marine environment. It is therefore important to improve the waste management system at (inter)national (change in production and packaging policy) and local scale (introducing sustainable solutions to refugee camp design) by promoting recycling and circular economy projects to diminish AL pollution.

Dog poop bags: A non-negligible source of plastic pollution.

Plastic pollution derived from the disposal of plastic bags in the environment is clearly evidenced. However, little attention has been directed towards plastic waste derived from plastic dog poop bags (DPBs), which are widely used and can never be recycled. Herein, we raise concerns about the contribution of DPBs to plastic pollution in the environment. Combining the weight of each DPB, the number of bags daily used for a dog, and the number of pet dogs around the world, we estimated the number of annual consumed and disposed DPBs at more than 415 billion, or equivalently 0.76-1.23 million tons of plastics based on various weights of different DPBs. Although plastic waste produced by DPBs only accounts for a small fraction (0.6%) of the total plastic waste generation, the extremely short life cycle of DPBs has made them a non-negligible source of plastic pollution in the environment.

Effect of biofilm formation on different types of plastic shopping bags: Structural and physicochemical properties.

Plastics and biofilms have a complicated relationship that has great interest. Bacterial cell attachment and biofilm formation is considered to cause health and environmental risks from plastic waste accumulation. In water, plastic waste could serve as a new substrate for bacteria. In our study, the attachment of Escherichia coli K12, to four types of plastic shopping bags (biodegradable polylactic acid and the non-biodegradable polypropylene, polyethylene and polyvinyl chloride) was investigated. The change in physicochemical phenomena of each plastic, such as reduced hydrophobicity and higher exopolysaccharide concentrations (total extractable protein and carbohydrate) resulted in increased biofilm content on the plastic surfaces. The bacterial colonization of different plastic surfaces controls the ionic strength of the nutrition sources. The adhesion of Escherichia coli K12 cells on the surfaces were revealed by SEM images. The finding shows that increases surface roughness, besides favor for adhesion of bacterial cells due to hydrophobicity leading to a rapid attachment of Escherichia coli K12 on the surfaces. In addition, we used Derjaguin-Landau-Verwey-Overbeek theory to predict the attachment of Escherichia coli K12, which gave result of adhesion due to the high energy barrier. This present study added to our knowledge of the possible consequences of plastics acting as a new habitat for microbes in different aquatic condition.

Go Green and Recycle: Analyzing the Usage of Plastic Bags for Shopping in China.

The extensive usage of plastic bags has caused detrimental environmental damage, and an influx of research efforts have been undertaken to reduce people's usage of plastic bags. However, studies regarding people's reuse of plastic bags are still scarce. Therefore, this study is motivated to bridge this research gap by examining the determinants of old plastic bag usage and consumers' maximum willingness to pay price for plastic carrier bags via a semi-structured online survey on a random sample of 777 Chinese consumers. Descriptive summary, KW test, and logistic regression were used to identify potential determinants and their influence on consumers' usage of old plastic bags. The findings indicate that consumers' age, altruistic values, and their perceived plastic ban effectiveness are positively associated with the usage of old plastic bags. Specifically, the elder and altruistic consumers who are positive for plastic ban effectiveness are more likely to reuse old plastic bags. Furthermore, when plastic carrier bags are priced at RMB 2.0, 81.2% of the surveyed consumers say they will stop buying them. Based on the pricing setting experience from the Irish plastic bag policy, we suggest that the optimal price of plastic carrier bags is RMB 12.0, which is also six times of the consumer's maximum willingness to pay price.

How Do Tougher Plastics Ban Policies Modify People's Usage of Plastic Bags? A Case Study in China.

This study analyzes people's bag usage before and after the introduction of the tougher 2021 plastics ban policies by counting the number of charged carrier bags, inner bags, old plastic bags, and reusable bags used by consumers at the exits of the investigated supermarkets in Shanghai, China. The results indicate positive effects of the tougher 2021 measures by observing significantly decreased usage of charged carrier bags by 46%, and significantly increased usage of old plastic bags and reusable bags by 117% and 36%, respectively. Policy execution loopholes are found in some supermarkets which do not follow the tougher plastics ban measures. Fortunately, the spill-over effects from tougher-measure-executing supermarkets fix this issue to some extent. Additionally, the tougher 2021 measures fail to be the most powerful impacting factor on people's usage of each type of bag. To produce better plastics reducing results, other bag-targeted measures are necessary.