Nitrophenyl Thiourea-Modified Polyethylenimine Colorimetric Sensor for Sulfate, Fluorine, and Acetate.

A thiourea-based colorimetric sensor incorporating polyethyleneimine (PEI) and chromophoric nitrophenyl groups was synthesized and utilized for detecting various anions. Structural characterization of the sensor was accomplished using FTIR and 1H-NMR spectroscopy. The sensor's interactions and colorimetric recognition capabilities with different anions, including CI-, Br-, I-, F-, NO3-, PF6-, AcO-, H2PO4-, PO43-, and SO42-, were investigated via visual observation and UV/vis spectroscopy. Upon adding SO42-, F-, and AcO- anions, the sensor exhibited distinct color changes from colorless to yellow and yellowish, while other anions did not induce significant color alterations. UV/vis spectroscopic titration experiments conducted in a DMSO/H2O solution (9:1 volume ratio) demonstrated the sensor's selectivity toward SO42-, F-, and AcO-. The data revealed that the formation of the main compounds and anion complexes was mediated by hydrogen bonding, leading to signal changes in the nitrophenyl thiourea-modified PEI spectrum.

Effect of molecular weight of PEI on the strength and hydrophobic performance of fiber-based papers via PEI-KH560 surface sizing.

In recent years, researchers have put much attention on the improvements and upgrades of novel wet strength agent in the papermaking fields, especially in the usage of household paper. Herein, PEIM-KH560 by polyethyleneimine (PEI) and γ-glycidyl ether propyl trimethoxysilane (KH560) was synthesized with five molecular weights (Mw) of PEI at 600, 1800, 10,000, 70,000 and 750,000. Results showed that the molecular weight greatly influenced the physicochemical properties of PEI-KH560, such as the size and thermal stability. The intrinsic cationic charge of PEI-KH560 provided the bonding sites with the paper fibers, forming strengthened fiber-fiber joints. It was shown that the dry, wet strength and hydrophobicity of cellulosic paper sheets were obviously improved. When the m (PEI):m(KH560) is 1:2, the strength of papers after sizing by Mw of PEI at 600 and 1800 is the most obvious, with the dry strength increased by 227.9 % and 187.5 %, and the wet strength increased by 183.8 % and 207.8 %, respectively. The maximum hydrophobicity was found at the PEI1800-KH560 with the contact angle value of 130.6°. The resultant environmental-friendly agent (PEI-KH560) obtained in this work provides valuable significance for the preparation of household and food packaging paper.

Bacterial cellulose microfilament biochar-architectured chitosan/polyethyleneimine beads for enhanced tetracycline and metronidazole adsorption.

This study investigates the potential applications of incorporating 2D bacterial cellulose microfibers (BCM) biochar into chitosan/polyethyleneimine beads as a semi-natural sorbent for the efficient removal of tetracycline (TET) and metronidazole (MET) antibiotics. Batch adsorption experiments and characterization techniques evaluate removal performance and synthesized adsorbent properties. The adsorbent eliminated 99.13 % and 90 % of TET and MET at a 10 mg.L-1 concentration with optimal pH values of 8 and 6, respectively, for 90 min. Under optimum conditions and a 400 mg.L-1 concentration, MET and TET have possessed the maximum adsorption capacities of 691.325 and 960.778 mg.g-1, respectively. According to the isothermal analysis, the adsorption of TET fundamentally follows the Temkin (R2 = 0.997), Redlich-Peterson (R2 = 0.996), and Langmuir (R2 = 0.996) models. In contrast, the MET adsorption can be described by the Langmuir (R2 = 0.997), and Toth (R2 = 0.991) models. The pseudo-second-order (R2 = 0.998, 0.992) and Avrami (R2 = 0.999, 0.999) kinetic models were well-fitted with the kinetic results for MET and TET respectively. Diffusion models recommend that pore, liquid-film, and intraparticle diffusion govern the rate of the adsorption process. The developed semi-natural sorbent demonstrated exceptional adsorption capacity over eleven cycles due to its porous bead structure, making it a potential candidate for wastewater remediation.

Small-Scale Cultivation and Transfection of ExpiCHO and HEK293E Cells in Single-Use Orbitally Shaken Bioreactors.

Chinese hamster ovary (CHO) and human embryonic kidney 293 (HEK293) cells are the two most important mammalian hosts for the production of recombinant proteins. In this chapter, the suspension cultivation and transfection of these cells in small-scale, single-use orbitally shaken bioreactors, TubeSpin™ bioreactor 50 [orbitally shaken reactor 50 (OSR50)], and TubeSpin™ bioreactor 600 [orbitally shaken reactor 600 (OSR600)] are described. These are conical centrifuge tubes with nominal volumes of 50 mL and 600 mL, respectively, that have been redesigned with a ventilated cap for the cultivation of animal cells in suspension at working volumes up to 20 mL and 400 mL, respectively.

PEI-Mediated Transient Gene Expression in CHO Cells.

We describe a method for polyethyleneimine (PEI)-mediated transient transfection of suspension-adapted Chinese hamster ovary (CHO-DG44) cells for protein expression applicable at scales from 2 mL to 2 L. The method involves transfection at a high cell density (5 × 106 cells/mL) by direct addition of plasmid DNA (pDNA) and PEI to the culture and subsequent incubation at 31 °C with agitation by orbital shaking. This method requires 0.3 mg/L of coding pDNA, 2.7 mg/L of nonspecific (filler) DNA, and 15 mg/L of PEI. The production phase is performed at 31 °C in the presence of 0.25% N,N-dimethylacetamide (DMA). If desired, the method can be modified to avoid use of DMA by increasing the amount of coding DNA. We also provide information on culture vessel options, recommended working volumes, and recommended shaking speeds for transfections at scales from 2 mL to 2 L.

Ultrasound-targeted microbubble destruction improves the suppression and magnetic resonance imaging of pancreatic cancer with polyethyleneimine nanogels.

The chemoresistance of pancreatic cancer tumors urgently needs to be addressed. Pancreatic cancer is characterized by an abundant stroma, with significant fibrous connective tissue formation that encapsulates the tumor parenchyma and forms an interstitial microenvironment. Pancreatic stellate cells (PSCs) play a crucial role in this microenvironment and specially secrete periosteal protein (periostin), which can promote tumor growth, metastasis, and chemoresistance. Therefore, periostin has become a specific target of chemotherapy resistance intervention methods. The proposed polyethyleneimine (PEI) nanogels have multiple modification and efficient drug-loading properties. Additionally, ultrasound-targeted microbubble destruction (UTMD) supports the breakdown of the tough interstitial barrier of pancreatic cancer. A small interfering RNA (siRNA) can be used to downregulated the periostin gene, while sustained release of gemcitabine can promote killing of tumor cells. This method achieves a combination of gene silencing and chemotherapy. The imaging effect can be evaluated using magnetic resonance imaging (MRI). The ultimate goal of this work is to support individualized and effective therapeutic methods and help develop new strategies for pancreatic cancer treatment.

Recyclable chitosan adsorbent: Facile functionalization strategy, excellent removal capacity of dyes and adsorption mechanism.

The development of chitosan-based adsorbents with facile preparation, high adsorption performance and reusability for the removal of contaminant dyes remains a persistent challenge. To overcome this challenge, herein, we have developed a novel and extremely facile one-step strategy by which a new high-performance chitosan/polyethyleneimine/polyethylene glycol diglycidyl ether adsorbent (named as CC/PEI/PGDE) has been successfully fabricated via direct functionalization of CC by PEI at ambient temperature followed by subsequent freeze-drying. The Box-Behnken Design was employed to optimize the concentrations of adsorbent components. Attractively, this adsorbent exhibit outstanding adsorption performances to congo red (RED), acid blue-25 (BLUE) and amino black-10B (BLACK) with 2901 mg g-1 (90.9 %), 3434 mg g-1 (90.9 %), and 1438 mg g-1 (90.1 %) of adsorption capacities (removal efficiencies), respectively, and maintains nearly the same adsorption behaviors to original adsorbent even after 6 cycles of adsorption-desorption processes. Meanwhile, three kinetic models, three isothermal models, and the Vant Hoff model are employed to further investigate the adsorption behaviors of RED, BLUE, and BLACK dyes by CC/PEI/PGDE. The results from SEM, EDS, BET, FT-IR, pHZPC and XPS confirm that hydrogen bond interactions and electrostatic attractions play crucial roles in facilitating dyes adsorption by CC/PEI/PGDE. It is expected that this work can bring forward a new perspective for the facile design of high-performance adsorbent for removing anionic dyes from wastewater.

Self-assembled lignin-based flame retardant hybrids carrying Cu2+ for poly(lactic acid) composites with improved fire safety and mechanical properties.

To enhance the flame retardancy and mechanical performance of PLA, a polyelectrolyte complex predicated on lignin was obtained by electrostatic mutual adsorption of ammonium polyphosphate (APP), polyethyleneimine (PEI), and copper ions as raw materials. The FT-IR spectra and EDX analysis confirmed the successful synthesis of a lignin-based flame retardant hybrid (APL-Cu2+) containing copper, phosphorus, and nitrogen elements. The combustion test results showed that the peak heat release rate and total heat release of the PLA composite containing 12 wt% APL-Cu2+ were decreased by 15.1 % and 18.2 %, respectively, as compared to those of pure PLA. The char residue morphology observation revealed that the addition of APL-Cu2+ could promote the formation of a highly dense and stable graphitized char layer, while TG-MS detected the emission of refractory gases such as ammonia gas, carbon dioxide, and water during combustion. The strong hydrogen bonding between APL-Cu2+ and the PLA matrix kept the composite maintaining good strength and toughness. The tensile strength and impact strength of PLA/6APL-Cu2+ increased by 4.73 % and 65.71 %, respectively, due to its high crystallinity and good interfacial compatibility. This work provides a feasible method to develop biobased flame retardant hybrids for PLA composites with better fire safety and improved mechanical properties.

Pervaporation Membranes Based on Polyelectrolyte Complex of Sodium Alginate/Polyethyleneimine Modified with Graphene Oxide for Ethanol Dehydration.

Pervaporation is considered the most promising technology for dehydration of bioalcohols, attracting increasing attention as a renewable energy source. In this regard, the development of stable and effective membranes is required. In this study, highly efficient membranes for the enhanced pervaporation dehydration of ethanol were developed by modification of sodium alginate (SA) with a polyethylenimine (PEI) forming polyelectrolyte complex (PEC) and graphene oxide (GO). The effect of modifications with GO or/and PEI on the structure, physicochemical, and transport characteristics of dense membranes was studied. The formation of a PEC by ionic cross-linking and its interaction with GO led to changes in membrane structure, confirmed by spectroscopic and microscopic methods. The physicochemical properties of membranes were investigated by a thermogravimetric analysis, a differential scanning calorimetry, and measurements of contact angles. The theoretical consideration using computational methods showed favorable hydrogen bonding interactions between GO, PEI, and water, which caused improved membrane performance. To increase permeability, supported membranes without treatment and cross-linked were developed by the deposition of a thin dense layer from the optimal PEC/GO (2.5%) composite onto a developed porous substrate from polyacrylonitrile. The cross-linked supported membrane demonstrated more than two times increased permeation flux, higher selectivity (above 99.7 wt.% water in the permeate) and stability for separating diluted mixtures compared to the dense pristine SA membrane.

Targeted delivery of interleukin-12 plasmid into HepG2 cells through folic acid conjugated graphene oxide nanocarrier.

Successful gene therapy relies on carriers to transfer genetic materials with high efficiency and low toxicity in a targeted manner. To enhance targeted cell binding and uptake, we developed and synthesized a new gene delivery vector based on graphene oxide (GO) modified by branched polyethyleneimine (BPEI) and folic acid (FA). The GO-PEI-FA nanocarriers exhibit lower toxicity compared to unmodified PEI, as well as having the potential to efficiently condense and protect pDNA. Interestingly, increasing the polymer content in the polyplex formulation improved plasmid transfer ability. Substituting graphene oxide for PEI at an N/P ratio of 10 in the HepG2 and THP1 cell lines improved hIL-12 expression by up to approximately eightfold compared to simple PEI, which is twice as high as GO-PEI-FA in Hek293 at the same N/P ratio. Therefore, the GO-PEI-FA described in this study may serve as a targeting nanocarrier for the delivery of the hIL-12 plasmid into cells overexpressing folic acid receptors, such as those found in hepatocellular carcinoma.

Synthesis and real-time characterization of self-healing, injectable, fast-gelling hydrogels based on alginate multi-reducing end polysaccharides (MREPs).

Polysaccharide-based hydrogels are promising for many biomedical applications including drug delivery, wound healing, and tissue engineering. We illustrate herein self-healing, injectable, fast-gelling hydrogels prepared from multi-reducing end polysaccharides, recently introduced by the Edgar group. Simple condensation of reducing ends from multi-reducing end alginate (M-Alg) with amines from polyethylene imine (PEI) in water affords a dynamic, hydrophilic polysaccharide network. Trace amounts of acetic acid can accelerate the gelation time from hours to seconds. The fast-gelation behavior is driven by rapid Schiff base formation and strong ionic interactions induced by acetic acid. A cantilever rheometer enables real-time monitoring of changes in viscoelastic properties during hydrogel formation. The reversible nature of these crosslinks (imine bonds, ionic interactions) provides a hydrogel with low toxicity in cell studies as well as self-healing and injectable properties. Therefore, the self-healing, injectable, and fast-gelling M-Alg/PEI hydrogel holds substantial promise for biomedical, agricultural, controlled release, and other applications.

The Luminescence of Laser-Produced Carbon Nanodots: The Effect of Aggregation in PEI Solution.

Carbon nanodots (CNDs) produced in pure water by the ablation of graphite with a nanosecond laser pulse exhibit weak photoluminescence. A small addition of polyethyleneimine (PEI) to the aqueous suspension of CNDs causes a significant increase in emissions. This paper presents experimental and theoretical studies of the emission properties of CND/PEI systems. The obtained CNDs responded to even trace amounts of PEI in solution (~0.014% v/v), resulting in a significant increase in the initial weak blue emission of CNDs and PEI taken separately. Morphology and size measurements showed that particle aggregation occurred in the presence of the polymer. A decrease in the calculated Stokes shift values was observed with increasing PEI content in the solution. This indicates a reduction in the number of non-radiative transitions, which explains the increase in the emission intensity of the CND/PEI systems. These results therefore confirmed that the increase in the emission of CND/PEI systems is caused by particle aggregation. Kinetic studies proved that the process is controlled mainly by diffusion, the initial stage of which has a dominant influence on determining the optical properties of the system.

One-Step Synthesis of Polyethyleneimine-Grafted Styrene-Maleic Anhydride Copolymer Adsorbents for Effective Adsorption of Anionic Dyes.

Wastewater containing organic dyes has become one of the important challenges in water treatment due to its high salt content and resistance to natural degradation. In this work, a novelty adsorbent, PEI-SMA, was prepared by grafting polyethyleneimine (PEI) onto styrene-maleic anhydride copolymer (SMA) through an amidation reaction. The various factors, such as pH, adsorbent dosage, contact time, dye concentration, and temperature, which may affect the adsorption of PEI-SMA for Reactive Black 5 (RB5), were systematically investigated by static adsorption experiments. The adsorption process of PEI-SMA for RB5 was more consistent with the Langmuir isotherm model and the pseudo-second-order model, suggesting a single-layer chemisorption. PEI-SMA exhibits excellent adsorption performance for RB5 dye, with a maximum adsorption capacity of 1749.19 mg g-1 at pH = 2. Additionally, PEI-SMA exhibited highly efficient RB5 competitive adsorption against coexisting Cl- and SO42- ions and cationic dyes. The adsorption mechanism was explored, and it can be explained as the synergistic effect of electrostatic interaction, hydrogen bonding and π-π interaction. This study demonstrates that PEI-SMA could act as a high performance and promising candidate for the effective adsorption of anionic dyes from aqueous solutions.

Dialdehyde cellulose (DAC) and polyethyleneimine (PEI) coated polyvinylidene fluoride (PVDF) membrane for simultaneously removing emulsified oils and anionic dyes.

Developing high-efficiency membrane for oil and dye removal is very urgent, because wastewater containing them can cause great damage to human and environment. In this study, a coated membrane was fabricated by applying DAC and PEI onto the commercial PVDF microfiltration membrane for supplying the demand. The coated membrane presents superhydrophlic and superoleophobic properties with a water contact angle of 0o and underwater oil contact angle exceed 150°, as well as excellent low underwater oil adhesion performance. The coated membrane shows high separation efficiency exceeded 99.0% and flux 350.0 L·m-2·h-1 when used for separating for six kinds of oil including pump oil, sunflower oil, n-hexadecane, soybean oil, diesel and kerosene in water emulsions. Additionally, the coated membrane can effectively remove anionic dyes, achieving rejection rates of 94.7%, 93.4%, 92.3%, 90.7% for the CR, MB, RB5, AR66, respectively. More importantly, the membrane was able to simultaneously remove emulsified oil and soluble anionic dyes in wastewater containing both of them. Therefore, this novel coated membrane can be a promising candidate for treating complex wastewater.

High-efficiency and economical uranium extraction from seawater with easily prepared supramolecular complexes.

Developing effective adsorbents for uranium extraction from natural seawater is strategically significant for the sustainable fuel supply of nuclear energy. Herein, stable and low-cost supramolecular complexes (PA-bPEI complexes) were facilely constructed through the assembly of phytic acid and hyperbranched polyethyleneimine based on the multiple modes of electrostatic interaction and hydrogen bonding. The PA-bPEI complexes exhibited not only high uptake (841.7 mg g-1) and selectivity (uranium/vanadium selectivity = 84.1) toward uranium but also good antibacterial ability against biofouling. Mechanism analysis revealed that phosphate chelating groups and amine assistant groups coordinated the uranyl ions together with a high affinity. To be more suitable for practical applications, powdery PA-bPEI complexes were compounded with sodium alginate to fabricate various macroscopic adsorbents with engineered forms, which achieved an extraction capacity of 9.0 mg g-1 in natural seawater after 50 days of testing. Impressively, the estimated economic cost of the macroscopic adsorbent for uranium extraction from seawater ($96.5 âˆ¼ 138.1 kg-1 uranium) was lower than that of all currently available uranium adsorbents. Due to their good uranium extraction performance and low economic cost, supramolecular complex-based adsorbents show great potential for industrial uranium extraction from seawater.

Investigation of Ionic Polymers' Stabilizing and Flocculating Properties in Dispersed Activated Carbons Systems.

Activated carbons obtained via the thermochemical treatment of lemon balm and mint herbs were applied for ionic polymers adsorption, which directly affects the stability of these types of aqueous suspensions. The examined carbonaceous materials were characterized by well-developed specific surface area (approximately 1000 m2/g) and mesoporous structure. The adsorbed amounts of anionic poly(acrylic acid) and cationic polyethyleneimine from one-component solutions reached significant levels, but the efficiency of adsorption of these compounds from binary solutions slightly decreased. Moreover, the ionic polymers showed stabilizing properties towards the activated carbons suspensions. For both adsorbents, the most stable suspensions were systems containing both types of polymeric macromolecules with different ionic characters. This was due to the occurrence of electrosteric and depletion stabilization mechanisms. Furthermore, the zeta potential and size of particle aggregates were also influenced by the presence of polymers in the aqueous suspensions of activated carbons.

[Opening experiments: synthesis, purification, and characterization of polyethyleneimine-modified carbon dots].

Open experiments are an effective means of cultivating top-notch innovative talents. Based on student interests, research hotspots and our laboratory conditions, an experimental scheme was designed. In this experiment, polyethyleneimine modified carbon dots (PEI-CDs) were prepared via a one-step hydrothermal method using citric acid (CA) as the carbon source and PEI as the surface passivator. First, CA and PEI were completely dissolved in 0.1 mol/L HCl and transferred into an autoclave. The autoclave was heated to 130 ℃ for 2 h. PEI-CDs solution was obtained. After cooling to room temperature, the solution was concentrated to 2 mL by rotary evaporation. Finally, the PEI-CDs were precipitated, washed with ethanol, and dried under vacuum at 70 ℃ for 12 h. The obtained PEI-CDs were characterized by fluorescence spectrophotometry, absorption spectrophotometry, infrared spectrometry, and transmission electron microscopy. The results indicated that anhydrous-ethanol precipitation is a simple, rapid, economical, and green purification method. The as-prepared PEI-CDs had unique properties, such as good water solubility, high luminescence, uniform particle sizes, and good stability. Through this open experiment, students can not only master the operation of large-scale instruments but also enhance their interest in scientific research.

Construction of GPC3-modified Lipopolymer SiRNA Delivery System.

BACKGROUND: Gene therapy has been widely concerned because of its unique therapeutic mechanism. However, due to the lack of safe and effective carries, it has not been widely used in clinical practice. Glypican 3 (GPC3) is a highly specific proteoglycan for hepatocellular carcinoma and is a potential diagnostic and therapeutic target for hepatocellular carcinoma. Herein, to monitor the effect of gene therapy and enhance the transfection efficiency of gene carriers, GPC3-modified lipid polyethyleneimine-modified superparamagnetic nanoparticle (GLPS), a type of visualized carrier for siRNA (small-interfering RNA) targeting the liver, was prepared. METHODS: We performed in vitro gene silencing, cytotoxicity, and agarose gel electrophoresis to identify the optimal GLPS formulation. In vitro MRI and Prussian blue staining verified the liver-targeting function of GLPS. We also analyzed the biocompatibility of GLPS by co-culturing with rabbit red blood cells. Morphological changes were evaluated using HE staining. RESULTS: The GLPS optimal formulation consisted of LPS and siRNA at a mass ratio of 25:1 and LPS and DSPE-PEG-GPC3 at a molar ratio of 2:3. GLPS exhibited evident liver-targeting function. In vitro, we did not observe morphological changes in red blood cells or hemolysis after co-culture. In vivo, routine blood analysis revealed no abnormalities after GLPS injection. Moreover, the tissue morphology of the kidney, spleen, and liver was normal without injury or inflammation. CONCLUSION: GLPS could potentially serve as an effective carrier for liver-targeted MRI monitoring and siRNA delivery.

Construction of a dual-signal readout platform for effective glutathione S-transferase sensing based on polyethyleneimine-capped silver nanoclusters and cobalt-manganese oxide nanosheets with oxidase-mimicking activity.

A novel dual-mode fluorometric and colorimetric sensing platform is reported for determining glutathione S-transferase (GST) by utilizing polyethyleneimine-capped silver nanoclusters (PEI-AgNCs) and cobalt-manganese oxide nanosheets (CoMn-ONSs) with oxidase-like activity. Abundant active oxygen species (O2•-) can be produced through the CoMn-ONSs interacting with dissolved oxygen. Afterward, the pink oxDPD was generated through the oxidation of colorless N,N-diethyl-p-phenylenediamine (DPD) by O2•-, and two absorption peaks at 510 and 551 nm could be observed. Simultaneously, oxDPD could quench the fluorescence of PEI-AgNCs at 504 nm via the inner filter effect (IFE). However, in the presence of glutathione (GSH), GSH prevents the oxidation of DPD due to the reducibility of GSH, leading to the absorbance decrease at 510 and 551 nm. Furthermore, the fluorescence at 504 nm was restored due to the quenching effect of oxDPD on decreased PEI-AgNCs. Under the catalysis of GST, GSH and1-chloro-2,4-dinitrobenzo (CDNB) conjugate to generate an adduct, initiating the occurrence of the oxidation of the chromogenic substrate DPD, thereby inducing a distinct colorimetric response again and the significant quenching of PEI-AgNCs. The detection limits for GST determination were 0.04 and 0.21 U/L for fluorometric and colorimetric modes, respectively. The sensing platform illustrated reliable applicability in detecting GST in real samples.

Thickness Dependent CO2 Adsorption of Poly(ethyleneimine) Thin Films for Direct Air Capture.

Mesoporous silica impregnated with polyethyleneimine (PEI) has been shown to be a suitable material for the direct air capture (DAC) of CO2. Factors such as CO2 concentration, temperature, and amine loading impact overall capture capacity and amine efficiency by altering diffusional resistance and reaction kinetics. When studied in the impregnated 3-dimensional sorbent material, internal diffusion impacts the evaluation of the reaction kinetics at the air/amine interface. In this work, we designed a novel tandem quartz crystal microbalance with dissipation (QCM-D) and polarization modulation infrared reflective absorption spectroscopy (PM-IRRAS) instrument. CO2 adsorption kinetics of the PEI-based amine layer in a 2-dimensional geometry were studied at a variety of film thicknesses (10 nm to 100 nm), temperatures (25 °C to 80 °C), and CO2 concentrations (5 % and 0.04 % by mole fraction). Total CO2 capture capacity increased with film thickness but decreased amine efficiency, as additional diffusional resistance for thicker films limits access to available amine sites. The capture capacity of thick films (>50 nm) is shown to be limited by amine availability, while capture of thin films (<50 nm) is limited by CO2 availability. A 50 nm PEI film was shown to be optimal for capture of 0.04 % (400 ppm) CO2. The adsorption profiles for these conditions were fitted to pseudo-first order and Avrami fractional order models. The reaction process switches between a diffusion limited reaction to a kinetic limited reaction at 80 °C when using 5 % CO2 and 55 °C when using 0.04 % CO2. These results offer accurate analysis of adsorption of CO2 at the air/amine interface of PEI films which can be used for the design of future sorbent materials.