Selective on-site detection and quantification of polystyrene microplastics in water using fluorescence-tagged peptides and electrochemical impedance spectroscopy.

In this study, we developed a method for the on-site selective detection and quantification of microplastics in various water matrices using fluorescence-tagged peptides combined with electrochemical impedance spectroscopy (EIS). Among the types of plastics found in seawater, polystyrene (PS) microplastics were selected. Fluorometry, scanning electron microscopy (SEM), and Raman spectroscopy were used to verify the specific interaction of these peptides with PS spherical particles of different sizes (ranging from 0.1 to 250 µm). Principal component analysis (PCA) was employed to determine the effects of temperature (25-65 °C), incubation time (5 and 10 min), and particle size on plastic-peptide bonding efficiency, based on fluorescence intensity. For each water type (pure, tap, NaCl (0.5 M), and seawater), EIS plots (Nyquist and Bode) were generated. Significant factors affecting the EIS response, including particle size, shape, and material, were analyzed by measuring electrical parameters for different microplastic concentrations (50 ppb to 20 ppm). The EIS parameters changed with increasing plastic concentration, determining a limit of detection (LOD) of 50 ppb (ng/mL) for pure and tap water and 400 ppb for saline water, as the lowest concentration producing a significant change in EIS parameters compared to the baseline. The sensor proved highly effective for detecting microplastics in low ionic strength environments such as pure and tap water. However, in high ionic strength environments like saline and seawater, the detection capability diminished, likely due to the masking effect of ions on the EIS response.

A sustainable approach towards extraction of diosgenin from fenugreek seeds using polystyrene/divinyl benzene resin.

Diosgenin, a bioactive molecule; is one of the deeply explored saponin with a wide spectrum of benefits against various ailments. The extraction and yield enhancement of diosgenin from a wide range of naturally occurring medicinal products has always been a challenging task for its commercial usage. The current research work envisages the use of a novel resin to maximize the yield of diosgenin. The extracted diosgenin was characterized using modern techniques. The current method qualifies for the extraction of diosgenin at a large scale making it a commercially viable technique.

Preferred Lung Accumulation of Polystyrene Nanoplastics with Negative Charges.

With the increasing presence of nanoplastics (NPs) in the human bloodstream, it is urgent to investigate their tissue accumulation and potential health risks. This study examines the effects of the size and surface charges of polystyrene (PS) NPs on lung accumulation. Using magnetic separation, we identified the protein corona composition on iron-core PS NPs, revealing the enrichment of vitronectin and fibrinogen. The corona promotes integrin αIIbß3 receptor-mediated uptake by lung endothelial cells, explaining that both the corona composition and protein structure determine preferred localization of negatively charged PS NPs in the lung. This study uncovers the role of protein corona in NP uptake and the way NPs enter the lung, emphasizing the need to consider interactions between nanoplastics with varying surface characteristics and biological molecules in the nanotoxicological field.

Impact of dissolved organic matter characteristics and inorganic species on the stability and removal by coagulation of nanoplastics in aqueous media.

The aggregation of rough, raspberry-type polystyrene nanoparticles (PS-NPs) was investigated in the presence of six hydrophobic and hydrophilic dissolved organic matter (DOM) isolates and biopolymers (effluent OM) in NaCl and CaCl2 solutions using time-resolved dynamic light scattering. Results showed that the stability of PS-NPs mainly depends on OM characteristics and ionic composition. Due to cation bridging, the aggregation rate of PS-NPs in Ca2+-containing solutions was significantly higher than at similar Na+-ionic strength. Biopolymers rich in protein and carbohydrate moieties showed higher affinity to the surface of PS-NPs than the other DOM isolates in the absence of both Ca2+ and Na+. Overall, the stability of PS-NPs followed the order of biopolymers > hydrophobic isolates > hydrophilic isolates in the presence of Na+ and biopolymers > hydrophilic isolates > hydrophobic isolates in Ca2+-containing solutions. In the presence of high MW structures (biopolymers), PS-NPs aggregation in both NaCl and CaCl2 solutions was attributed to steric repulsive forces. The impact of hydrophilic and hydrophobic isolates on PS-NPs aggregation highly relied on the ionic composition. Coagulation was an effective pretreatment for PS-NPs removal. Using inductively coupled plasma-mass spectrometry, higher removals were recorded with Al2(SO4)3 in the absence of DOM, while PACl more efficiently coagulated PS-NPs in the presence of DOM isolates.

Distinctive toxic repercussions of polystyrene nano plastic towards aquatic non target species Nitrobacter vulgaris, Scenedesmus sp and Daphnia magna.

The widespread application of plastics and its eventual degradation to micro-sized or nano-sized plastics has led to several environmental concerns. Moreover, nanoplastics can easily cascade through the food chain accumulating in the aquatic organisms. Thus, our study focussed on investigating the hazardous impact of nano-sized plastics on aquatic species including Nitrobacter vulgaris, Scenedesmus sp, and Daphnia magna. Various concentrations of polystyrene nanoplastics ranging from 0.01 mg/L to 100 mg/L were tested against Nitrobacter vulgaris, Scenedesmus sp, and Daphnia magna. The minimum inhibitory concentration of polystyrene nanoplastics in Nitrobacter vulgaris was found to be 25 mg/L, and in Daphnia magna, the median lethal concentration 50 was observed to be 64.02 mg/L. Exposure of Scenedesmus sp with increasing nanoplastic concentrations showed a significant decrease in total protein (p < 0.001), and chlorophyll content (p < 0.01), whereas the lipid peroxidation increased (p < 0.001) significantly. Similarly, Nitrobacter vulgaris and Daphnia magna showed a significant decrease in catalase activity (p < 0.001) and an increase in lipid peroxidation levels (p < 0.01). Concomitant with lipid peroxidation results, decreased superoxide dismutase levels (p < 0.01) and protein concentrations (p < 0.01) were observed in Daphnia magna. Besides, the increasing concentration of polystyrene nanoplastics displayed an elevated mortality rate in Scenedesmus sp (p < 0.001) and Nitrobacter vulgaris (p < 0.01). Further, scanning electron microscopy analysis substantiated the morphological alterations in Nitrobacter vulgaris and Scenedesmus sp on exposure to polystyrene nanoplastics.

Dry biofilms on polystyrene surfaces: the role of oxidative treatments for their mitigation.

Candida auris and Staphylococcus aureus are associated with a wide range of infections, as they exhibit multidrug resistance - a growing health concern. In this study, gaseous ozone, and ultraviolet-C (UVC) radiation are applied as infection control measures to inactivate dry biofilms of these organisms on polystyrene surfaces. The dosages utilised herein are 1000 and 3000 ppm.min for ozone and 2864 and 11592 mJ.cm-2 for UVC. Both organisms showed an increased sensitivity to UVC relative to ozone exposure in a bespoke decontamination chamber. While complete inactivation of both organisms (>7.5 CFU log) was realized after 60 mins of UVC application, this could not be achieved with ozonation for the same duration. However, a combined application of ozone and UVC yielded complete inactivation in only 20 mins. For both treatment methods, it was observed that dry biofilms of S. aureus were more difficult to inactivate than dry biofilms of C. auris. Compared to dry biofilms of C. auris, micrographs of wet C. auris biofilms revealed the presence of an abundance of extracellular material after treatments. Interestingly, wet biofilms were more difficult to inactivate than dry biofilms. These insights are crucial to preventing recalcitrant and recurrent infections via contact with contaminated polymeric surfaces.

Oxidative treatment can inactivate dry biofilms formed by C. auris and S. aureus.Both organisms showed an increased sensitivity to UVC compared to ozone.Dry biofilms of S. aureus were more difficult to inactivate than dry biofilms of C. auris.Wet biofilms of C. auris display a spongy appearance compared to its dry biofilms.Wet biofilms of C. auris proved more difficult to inactivate than its dry biofilms.

Histopathological lesions of the gastrointestinal tract associated with the use of polystyrene sulfonate and sevelamer: a meta-analysis.

Background: Gastrointestinal severe adverse events such as ulceration and perforation have been reported for sodium or calcium polystyrene sulfonate and sevelamer. Howewer, their role in the pathogenesis is unclear. Chronic kidney disease is a well known risk factor, while the role of hypertension and/or diabetes is uncertain. Methods: A meta-analysis of the published literature was conducted to review the clinical features, risk factors and histopathological findings of patients who experienced gastrointestinal adverse events after administration of polystyrene sulfonate or sevelamer. Results: The meta-analysis indicated that patients were more likely to show necrosis and/or perforation when the resin used was polystyrene sulfonate compared to sevelamer (p < 0.001). Death was more likely in patients taking polystyrene sulfonate compared to sevelamer (p < 0.001). Discussion: The results show that sevelamer is more likely to lead to inflammation or ulceration in the gastrointestinal tract than polystyrene sulfonate, which is more likely to be associated with severe gastrointestinal adverse events such as necrosis and/or perforation. Polystyrene sulfonate is significantly associated with death compared to sevelamer.

Eco-environmental responses of Eichhornia crassipes rhizobacteria community to co-stress of per(poly)fluoroalkyl substances and microplastics.

The stabilization of rhizobacteria communities plays a crucial role in sustaining healthy macrophyte growth. In light of increasing evidence of combined pollution from microplastics (MPs) and per- and polyfluoroalkyl substances (PFASs), Selecting typical floating macrophyte as a case, this study explored their impacts using hydroponic simulations and 16S rRNA high-throughput sequencing. A total of 31 phyla, 77 classes, 172 orders, 237 families, 332 genera, and 125 rhizobacteria species were identified. Proteobacteria (16.19% to 57.70%) was the dominant phylum, followed by Bacteroidota (12.34% to 44.48%) and Firmicutes (11.31% to 36.36%). In terms of α-diversity, polystyrene (PS) MPs and PFASs significantly impacted community abundance (ACE and PD-tree) rather than evenness (Shannon and Pielou) compared to the control. ßMNTD and ßNTI analyses revealed that PS MPs enhanced deterministic assembly processes driven by F-53B and GenX, while mitigating those induced by PFOA and PFOS. Contamination treatments narrowed the ecological niche breadths at both the phylum (5% (PS) to 49.91% (PS & PFOA)) and genus levels (8% (PS) to 63.96% (PS & PFOA)). Functionally, MPs and PFASs decreased the anaerobic capacity and ammonia nitrogen utilization of rhizosphere bacteria. This study enhances our understanding of the microecological responses of macrophyte-associated bacteria to combined MP and PFAS contamination and offers insights into ecological restoration strategies and mitigating associated environmental risks.

Changes in global methylation patterns of Mytilus galloprovincialis exposed to microplastics.

Microplastics (MPs) disturb the normal activity of aquatic organisms at different levels, causing physiological stress and altering feeding, growth, and reproduction. Alterations of epigenetic patterns due to exposure to MPs have scarcely been studied in invertebrates. In this study, Mytilus galloprovincialis mussels (N = 61) were intermittently exposed to different concentrations of pure polystyrene microbeads for three weeks. The concentrations used in this research were similar to those currently found in certain polluted environments (E1), as well as higher doses to which mussels could be further exposed (E2 and E3). After exposure period, the global methylation patterns were investigated using Amplified Fragment Length Polymorphism (AFLPs). Significantly lower methylation was found in exposed groups compared to the control group. The level of hypomethylation increased with the concentration of microbeads. Similar results were found from field samples inhabiting two sites differentially MPs-polluted. The implications of this discovery were analysed and discussed, noting the already known effects of MPs on metabolism and cell division. Further studies on this and other sentinel organisms are recommended to understand the response of the aquatic species to the currently increasing MPs pollution.

An integrated approach for plastic polymer degradation by the gut bacterial resident of superworm, Zophobas morio (Coleoptera:Tenebrionidae).

The potential of superworm to remove certain plastic polymers has recently been noted. In this study, aerobic bacterial strains were isolated from the gut of Zophobas morio larvae which were fed with polyethylene (PE), polyethylene terephthalate (PET), polypropylene (PP), and polystyrene (PS) polymers. Strains P2 (Leminorella), P6 (Bacillus), P9 (Bacillus), and P5 (Citrobacter) were associated with the highest PS (2.7%), PP (1.3%), PET (1.1%), and PE (0.42%) weight loss after 28 days, respectively. Pretreatments including thermal treatment (80 °C for 10 days), weathering (4 months in the free environment), and nitric and sulfuric acids (1 N, 10 days) improved the degradation of PE (1.3%), PET (1.9%), PP (5.2%), and PS (8.3%) by the same strains, respectively. Further analyses on the PS degradation by Leminorella sp. P2 revealed acid pretreatment promoted the formation of the C = C, C = O, and O-H functional groups. Surface irregularities, as well as a 3.6-fold increase in surface roughness, were observed in the PS film subjected to biodegradation. The contact angle dropped from 98.4° to 42.2° following the biodegradation. Bacterial depolymerization was confirmed by the 8.7% and 3.4% reduction of Mn and Mw and the change in polydispersity from 1.65 to 1.75. The results suggest that Zophobas morio microbiota in combination with abiotic pretreatment can be considered for plastic waste management.

Detection of Tn-antigen in breast and prostate cancer models by VVL-labeled red dye-doped nanoparticles.

Aim: Fluorescence detection of breast and prostate cancer cells expressing Tn-antigen, a tumor marker, with Vicia villosa lectin (VVL)-labeled nanoparticles.Materials & methods: Breast and prostate cancer cells engineered to express high levels of Tn-antigen and non-engineered controls were incubated with VVL-labeled or unlabeled red dye-doped silica-coated polystyrene nanoparticles. The binding to cells was studied with flow cytometry, confocal microscopy, and electron microscopy.Results: Flow cytometry showed that the binding of VVL-labeled nanoparticles was significantly higher to Tn-antigen-expressing cancer cells than controls. Confocal microscopy demonstrated that particles bound to the cell surface. According to the correlative light and electron microscopy the particles bound mostly as aggregates.Conclusion: VVL-labeled nanoparticles could provide a new tool for the detection of Tn-antigen-expressing breast and prostate cancer cells.

[Box: see text].

The combined toxicity of polystyrene microplastic and arsenate: From the view of biochemical process in wheat seedlings (Triticum aestivum L.).

Microplastics (MPs) are important carriers of various toxic metals and can alter their toxicity pattern in agricultural soil, leading to combined pollution, therefore posing new challenges to soil pollution management and environmental risk assessment. In this study, we observed the internalization of MPs in plants and conducted incubation experiments to evaluated the effects of arsenate (As(V)) alone and in combination with polystyrene (PS) MPs on wheat seedlings (Triticum aestivum L.). Under As(V) alone and combined with PS-MP exposure, dose-dependent toxicity in terms of root and stem elongation and biomass accumulation was observed. Compared with As(V) alone, the presence of PS-MPs reduced the accumulation of As in wheat roots by 11.43-58.91%, but PS-MPs intensified the transport of As to the aboveground parts of wheat, increasing As accumulation in wheat stems by 27.77-1011.54%. This causes more serious mechanical damage and oxidative stress to plant cells, increasing the accumulation of reactive oxygen species and lipid peroxidation in wheat roots and upregulating the activities of antioxidant enzymes such as superoxide dismutase (SOD) and peroxidase (POD). In addition, the co-exposure of As(V) and PS-MPs disrupts the photosynthetic system of wheat leaves and the secretion activities of roots. Therefore, the combination of As(V) and PS-MPs caused greater damage to wheat growth. Our findings contribute to a more comprehensive assessment of the combined toxicity of MPs and heavy metal to crops.

Addressing the relevance of polystyrene nano- and microplastic particles used to support exposure, toxicity and risk assessment: implications and recommendations.

BACKGROUND: There has been an exponential increase in the number of studies reporting on the toxicological effects associated with exposure to nano and microplastic particles (NMPs). The majority of these studies, however, have used monodispersed polystyrene microspheres (PSMs) as 'model' particles. Here we review the differences between the manufacture and resulting physicochemical properties of polystyrene used in commerce and the PSMs most commonly used in toxicity studies. MAIN BODY: In general, we demonstrate that significant complexity exists as to the properties of polystyrene particles. Differences in chemical composition, size, shape, surface functionalities and other aspects raise doubt as to whether PSMs are fit-for-purpose for the study of potential adverse effects of naturally occurring NMPs. A realistic assessment of potential health implications of the exposure to environmental NMPs requires better characterisation of the particles, a robust mechanistic understanding of their interactions and effects in biological systems as well as standardised protocols to generate relevant model particles. It is proposed that multidisciplinary engagement is necessary for the development of a timely and effective strategy towards this end. We suggest a holistic framework, which must be supported by a multidisciplinary group of experts to work towards either providing access to a suite of environmentally relevant NMPs and/or developing guidance with respect to best practices that can be adopted by research groups to generate and reliably use NMPs. It is emphasized that there is a need for this group to agree to a consensus regarding what might best represent a model NMP that is consistent with environmental exposure for human health, and which can be used to support a variety of ongoing research needs, including those associated with exposure and hazard assessment, mechanistic toxicity studies, toxicokinetics and guidance regarding the prioritization of plastic and NMPs that likely represent the greatest risk to human health. It is important to acknowledge, however, that establishing a multidisciplinary group, or an expert community of practice, represents a non-trivial recommendation, and will require significant resources in terms of expertise and funding. CONCLUSION: There is currently an opportunity to bring together a multidisciplinary group of experts, including polymer chemists, material scientists, mechanical engineers, exposure and life-cycle assessment scientists, toxicologists, microbiologists and analytical chemists, to provide leadership and guidance regarding a consensus on defining what best represents environmentally relevant NMPs. We suggest that given the various complex issues surrounding the environmental and human health implications that exposure to NMPs represents, that a multidisciplinary group of experts are thus critical towards helping to progress the harmonization and standardization of methods.

Impact of Microplastic Exposure on Blood Glucose Levels and Gut Microbiota: Differential Effects under Normal or High-Fat Diet Conditions.

Microplastics are emerging pollutants that have garnered significant attention, with evidence suggesting their association with the pathogenesis of type 2 diabetes mellitus. In order to assess the impact of polystyrene microplastic exposure on alterations in the gut microbiota and the subsequent implications for glucose dysregulation under different dietary conditions in mice, we investigated the effects and disparities in the blood glucose levels induced by polystyrene microplastic exposure in mice fed a high-fat diet versus those fed a normal diet. Using 16S rRNA sequencing and bioinformatics analyses, we explored the dynamic changes and discrepancies in the gut microbiota stability induced by polystyrene microplastic exposure under varied dietary conditions, and we screened for gut genera associated with the potential of polystyrene microplastics to disrupt glucose homeostasis. Our findings indicate that a high-fat diet resulted in abnormal mouse body weight, energy intake, blood glucose levels and related metabolic parameters. Additionally, polystyrene microplastic exposure exacerbated the glucose metabolism disorders induced by a high-fat diet. Furthermore, the composition and diversity of the mouse gut microbiota were significantly altered following microplastic exposure, with 11 gut genera exhibiting a differential presence between mice fed a high-fat diet combined with microplastic exposure compared to those fed a normal diet with microplastic exposure. Moreover, Ucg-009 played an intermediary role in the association between a high-fat diet and the fasting blood glucose. Hence, our study demonstrates that polystyrene microplastic exposure exacerbates high-fat diet-induced glucose metabolism disorders, whereas its impact on the blood glucose under normal dietary conditions is not significant, highlighting the differential influence attributable to distinct alterations in characteristic gut genera.

The use of chitosan as an antioxidant in the feed of cultivated P. vannamei shrimp against oxidative stress induced by exposure to microplastics.

Microplastics (MP) are omnipresent in aquaculture and can induce several toxic effects, mainly oxidative stress. Therefore, alternatives to minimize these effects are welcome. In this study, chitosan (1 and 3 g/kg) was supplemented through the feed of farmed shrimp P. vannamei for 30 days. After this period, the shrimp were exposed to MP (0.5 mg/L) for 7 days. The results showed the presence of MP in hepatopancreas, gills and muscle. Hepatopancreas morphological alterations, as well as lipid peroxidation, a decrease in GSH level, and an increase in SOD activity indicated an oxidative stress that was reversed by chitosan. The muscle was also affected by MP, showing decreased CAT activity and increased SOD activity, though no lipid peroxidation was observed. In muscle, chitosan reversed the SOD increase to basal activity. The results obtained showed that chitosan was more effective against oxidative stress than in preventing accumulation and histological damage.

Plastic pollution in a rapidly developing nation: A comprehensive assessment of litter and marine debris surrounding coastal Cambodia.

Cambodia is a rapidly developing country in south-east Asia, a region forecast as an outsized source of plastic pollution into the world's oceans. However, to date there has been no large-scale assessment of plastic pollution in the environment within the country. We conducted a comprehensive assessment of plastic items and hotspots across 243 coastal, river and inland sites along the entire coastline of Cambodia, recording 46,927 items in transects throughout the study area. Plastic densities along coastlines were more than ten times those on riverbanks and more than twenty times that of inland areas. Averaging 70 plastic items per metre of coastline, Cambodia has among the highest average loads of whole plastic items recorded on coastlines globally. Single-use plastic bottles were the most abundant whole item recorded, overrepresented by drinking water bottles. Polystyrene foam was the most common fragmented item. We provide specific recommendations to reduce plastic in Cambodia's environment.

Depuration kinetics and accumulation of microplastics in tissues of mussel Mytilus galloprovincialis.

Microplastics (MPs) constitute the predominant plastic type in marine environments. Since they occupy the same size fraction of sediment particles and planktonic organisms they are potentially bioavailable to a broad scope of organisms, such as filter feeders, which are particularly vulnerable to MP ingestion. To understand the potential impact of MPs in filter feeders it is essential to clarify the uptake, accumulation patterns and elimination rates with time of MPs. The aim of this study was to determine the depuration dynamics and accumulation in tissues of mussels Mytilus galloprovincialis exposed during 24 h to different size polystyrene MPs (1 µm and 10 µm), and depurated for a maximum of 7 days (T = 24 h, T = 48 h and T = 7 d). Mussels were chemically digested with KOH 10% and filtered to quantify the number of MP ingested, and they were cryostat sliced for MP localization in tissues. Both MP sizes were quantified in all depuration times, but mussels accumulated significantly higher quantities of 10 µm MP throughout depuration compared to 1 µm MP. A significant decrease was observed after 7 d depuration in mussels exposed to 10 µm. Mussels removed the same amount of 1 and 10 µm MP after 7 days depuration. However, the depuration dynamics differed for each size-MPs and showed to be size-dependent. Most of both size MPs were eliminated in the first 24 h, but 1 µm MP showed to pass faster through the digestive tract than 10 µm MP. MPs of 1 µm and 10 µm were localized mainly in the lumen and a few in the epithelium of the digestive tract (stomach, intestine and digestive gland) during the depuration and in the gills after the exposure; as confirmed by Raman spectroscopy. The usage of chemical digestion and histological analysis as complementary techniques show to be suitable to infer the depuration dynamics of MPs in mussels.

Deciphering the links: Fragmented polystyrene as a driver of skin inflammation.

Nano- and microplastics (NMPs), ubiquitous in the environment, pose significant health risks. We report for the first time a comprehensive study using in-vitro, in-vivo, and ex-vivo models to investigate the penetration and inflammatory effects of fragmented polystyrene (fPS) on human skin, including the analysis of both penetration depth and fPS amounts that penetrate the skin. Human keratinocyte (HaCaT) and human dermal fibroblast (HDF) cells exposed to fPS exhibited notable internalization and cytotoxicity. In a 3D human skin model, fPS particles penetrated the dermal layer within one hour, with an average maximum penetration of 4.7 µg for particles smaller than 2 µm. Similarly, mouse dorsal skin and human abdominal skin models confirmed fPS penetration. RNA sequencing revealed substantial upregulation of inflammatory genes, including IL-1α, IL-1ß, IL-18, IL-6, IL-8, ICAM-1, FOS, and JUN, following fPS exposure. These findings were validated at both the mRNA and protein levels, indicating a robust inflammatory response. Notably, the inflammatory response in both the 3D human skin and mouse models increased in a dose-dependent manner, underscoring the toxicological impact of fPS on skin health. This study provides crucial insights into the mechanisms through which NMPs affect human health and underscores the need for further research to develop effective mitigation strategies.

Cockroach Blaptica dubia biodegrades polystyrene plastics: Insights for superior ability, microbiome and host genes.

The report demonstrated that a member of cockroach family, Blaptica dubia (Blattodea: Blaberidae) biodegraded commercial polystyrene (PS) plastics with Mn of 20.3 kDa and Mw of 284.9 kDa. The cockroaches digested up to 46.6 % of ingested PS within 24 h. The biodegradation was confirmed by the 13C isotopic shift of the residual PS in feces versus pristine PS (Δ Î´13C of 2.28 ‰), reduction of molecular weight and formation of oxidative functional groups in the residual PS. Further tests found that B.dubia cockroaches degraded all eight high purity PS microplastics with low to ultra-high molecular weights (MW) at 0.88, 1.20, 3.92, 9.55, 62.5, 90.9, 524.0, and 1040 kDa, respectively, with superior biodegradation ability. PS depolymerization/biodegradation pattern was MW-dependent. Ingestion of PS shifted gut microbial communities and elevated abundances of plastic-degrading bacterial genes. Genomic, transcriptomic and metabolite analyses indicated that both gut microbes and cockroach host contributed to digestive enzymatic degradation. PS plastic diet promoted a highly cooperative model of gut digestive system. Weighted gene co-expression network analysis revealed different PS degradation patterns with distinct MW profiles in B. dubia. These results have provided strong evidences of plastic-degrading ability of cockroaches or Blaberidae family and new understanding of insect and their microbe mediated biodegradation of plastics.

The toxic effects of polystyrene microplastic/nanoplastic particles on retinal pigment epithelial cells and retinal tissue.

The increasing use of contact lenses, artificial tears, and anti-vascular endothelial growth factor (anti-VEGF) drug injections for age-related macular degeneration has heightened the likelihood of eye exposure to microplastic particles. Extensive research has established that microplastic particles can induce oxidative stress on the ocular surface, resulting in damage. However, the impact of these particles on the retina remains unclear. Therefore, this study investigated whether microplastics/nanoplastics (MPs/NPs) cause retinal damage. In vitro human retinal pigment epithelial (RPE) cells were exposed to polystyrene MPs and NPs for 48 h. Assessment of cell viability using WST-8; evaluation of TNF-α and IL-1ß expression; observation of cell morphology and particle invasion via TEM; measurement of ROS levels using the DCFDA reagent; and western blot analysis of SOD2, FIS1, Drp1, and LC3B expression were conducted. In vivo experiments involved intravitreal injection of MPs/NPs in rats, followed by retinal H&E staining 24 h later and evaluation of TNF-α and IL-1ß expression. Results indicated that exposure to MPs did not significantly alter RPE cell viability, whereas exposure to NPs led to a noticeable decrease. TEM images revealed NPs' penetration into cells, causing increased oxidative stress (SOD2), mitochondrial fission (FIS1, Drp1), and mitochondrial autophagy (LC3B). In vivo experiments demonstrated an increase in inflammatory cells in retinal tissues exposed to NPs, along with elevated levels of TNF-α and IL-1ß. Conclusively, both MPs and NPs impact the retina, with NPs displaying greater toxicity. NPs significantly elevate ROS levels in the retina and induce mitochondrial fission and mitophagy in RPE cells compared to MPs.