Mounting agents with low toxicity and with fast curing time for digital pathology in the intraoperative frozen section laboratory.

AIMS: In intraoperative frozen tissue section laboratories (FS laboratories) conventional practice for mounting coverslips on tissue slides involves the use of xylene-based mounting agents, such as Pertex. However, toxic vapours pose a risk to biomedical laboratory scientists (BLS) and pathologists who handle the wet slides to provide fast and urgent diagnostic results to surgeons during operations. Our study aims to evaluate non-toxic mounting agents to substitute Pertex, preferably with a fast curing time suitable for the demands of the new digital era in pathology. METHODS: Five non-toxic mounting agents were purchased and tested through six different protocols and compared to xylene-based Pertex as our gold standard. With light microscopy, tissue slides were quality assessed by BLS. Mounting agents, which were evaluated comparable to Pertex, were also evaluated by a pathologist, hence scanned digitally and re-evaluated. RESULTS: The protocols for Eukitt UV, Eukitt UV R-1 and Eukitt UV R-2 had significantly more artefacts (bubbles) compared to gold standard Pertex (p<0.0001, p=0.004 and p<0.0001, respectively) and assessed inadequate as replacements. Neo-Mount and Tissue Mount were assessed applicable regarding quality, but curing times were long. Tek Select UV showed promising results in both quality and fast curing time (protocol was <2 min). CONCLUSIONS: Toxic mounting agents need replacement to health guard professionals, and also digital pathology is revolutionising laboratories. A digitalized FS laboratory requires fast dry/cured slides for digital scanning. Therefore, a substitute for the FS laboratory should have the qualities of being non-toxic to handle and having a fast curing time, and a UV-based mounting agent may solve both requirements.

Cleaning validation for blister packaging machines in hospital-supplying pharmacies.

OBJECTIVE: To ensure quality-assured care for patients, validation of a cleaning process for blister machines is essential. Due to the high operating costs of maintaining high-performance liquid chromatography (HPLC) which is mainly used for this type of analysis, a new, quick and cost-effective analysis method using UV-Vis spectroscopy has been developed. METHOD: Marker substances (metamizole (dipyrone) and paracetamol tablets) were packed in blisters. Afterwards test tablets were packaged before and after cleaning the blister machine and examined for contamination using UV-Vis spectroscopy. RESULTS: UV-Vis spectroscopy has been shown to be superior to HPLC analysis for cleaning validation of blister machines, as it is much faster and cheaper, requires less equipment and personnel effort, while maintaining the same reliability and sensitivity. CONCLUSION: Unit-dose blistering is becoming increasingly popular in the daily routine of hospital pharmacies worldwide due to a variety of advantages. Therefore, cleaning validation of blistering machines has become a mandatory duty of care. The UV-Vis spectroscopic method presented here is the first innovative method suitable for the cleaning validation of blister machines to date.

Comparing visual inspection methods for parenteral products in hospital pharmacy: between reliability, cost, and operator formation considerations.

INTRODUCTION: The COVID-19 pandemic has led to unforeseen and novel manifestations, as illustrated by the management of drug shortages through the development of hospital production of sterile pharmaceutical preparations (P2S). Visual inspection of P2S is a release control whose methods are described in monographs of the European Pharmacopoeia (2.9.20) and the United States Pharmacopeia (1790). However, these non-automated visual methods require training and proficiency testing of personnel. The main objective of this work was to compare the reliability and speed of analysis of two visual methods and an automated method for detecting visible particles by image analysis in P2S. Furthermore, these methods were used to evaluate sources of particulate contamination during pre-production processes (washing, disinfection, depyrogenation) and production (filling, capping). MATERIALS AND METHODS: Three pharmacy technicians examined 41 clear glass vials of type I, 10 and/or 50 mL through manual visual inspection (MVI), semi-automated (SAVI), and automated (AVI) inspection. The vials were distributed as follows: (i) 16 vials of water for injection containing either glass particles (224 µm or 600 µm), stopper fragments, or textile fibres; (ii) five sterile injectable specialties; (iii) 20 vials of water for injection prepared under different pre-production conditions. RESULTS AND DISCUSSION: MVI and SAVI detected 100% of visible particles compared with 28% for AVI, which showed a deficiency in detecting textile fibres. All three methods correctly analysed P2S that did not contain visible particles. The three methods detected particles in vials maintained under International Organization for Standardization (ISO) 9 pre-production conditions. However, detections by (i) MVI and SAVI, and by (ii) AVI of particles contained in vials maintained under ISO 8 pre-production conditions were deemed satisfactory and unsatisfactory, respectively. CONCLUSION: The importance of visual inspection of P2S requires rapid, sensitive, and reliable detection methods. In this context, MVI and SAVI have proven to be more effective than AVI for a more competitive financial, training, and implementation investment.

How many mislabelled samples go unidentified? Results of a pilot study to determine the occult mislabelled sample rate.

BACKGROUND: Specimens with incorrect patient information are both a critical safety error and difficult to identify. Estimates of sample mislabelling rely on subjective identification of mislabelling, with the possibility that not all mislabelled samples are being caught. METHODS: We determined the blood type of two or more complete blood count specimens with the same patient label and assessed for discrepancies. We additionally determined the rate of identified sample mislabelling for the study period. RESULTS: We found a rate of 3.17 per 1000 discrepancies over the study period. These discrepancies most likely represent occult, or unidentified, mislabelled samples. In contrast, the rate of identified sample mislabelling was 1.15 per 1000. CONCLUSIONS: This study suggests that specimens identified as, or known to be, mislabelled represent only a fraction of those mislabelled. These findings are currently being confirmed in our laboratory and are likely generalisable to other institutions.

Medication reconciliation in hospitalized hematological patient. / Conciliación de la medicación en el paciente hematológico ingresado.

OBJECTIVE: The main objective was to analyze unjustified discrepancies during the medication reconciliation process in patients admitted to the Hematology Service of our hospital and the pharmaceutical interventions. As a secondary objective, to detect possible points of the procedure to be perfected with a view to protocolizing the medication reconciliation process in hematological patients that adapts to the conditions of our center. METHODS: Cross-sectional observational pilot study carried out in a reference hospital in hematology for a population of 800,000 inhabitants. Adult inpatients admitted to the Hematology Service between August and October 2022 whose medication had been reconciled were included. The main variables were: number and type of unjustified discrepancy, proposed pharmaceutical intervention, and acceptance rate. RESULTS: 36 conciliation processes were analyzed, 34 admissions and 2 intrahospital transfer. 58.3% of the patients presented at least one unjustified discrepancy. 38 unjustified discrepancies were detected, with an acceptance of pharmaceutical interventions of 97.4%. The most common types of discrepancy were medication omission (56.8%) and drug interaction (24.3%). The most frequent pharmaceutical interventions were reintroducing medication (48.6%) and treatment discontinuation (16.2%). Polypharmacy and chemotherapy multiplied by 4 the probability of presenting drug interactions. CONCLUSIONS: The most common unjustified discrepancies in the medication reconciliation process in hospitalized hematology patients are: Medication omission and drug interactions. The reintroduction of medication and suspension of the prescription are the most frequent accepted pharmaceutical interventions. Polypharmacy is related to an increase in unjustified discrepancies. The factors that promote the appearance of interactions are admissions to receive chemotherapy treatment and polypharmacy. The main point of improvement detected is the need to create a circuit that allows conciliation to be carried out on discharge. Medication reconciliation contribute to improving patient safety by reducing medication errors.

Experience from a regional percutaneous coronary intervention center: Aiming to assess and improve quality of care.

INTRODUCTION AND OBJECTIVES: Ischemic heart disease is the single most common cause of death in Europe. Mortality in patients presenting with ST-elevation myocardial infarction (STEMI) is associated with many factors, one of which is the time delay to treatment. The purpose of this work is to analyze the coronary pathway in our region in terms of timing, taking into consideration the place of first medical contact (FMC). METHODS: Consecutive patients admitted to our center with STEMI to undergo percutaneous coronary intervention (PCI) between 2013 and 2022 were analyzed. Age, gender, and time delays were collected. Analysis was performed with IBM SPSS version 28 for a significance level of 0.05. RESULTS: We found that non-PCI centers had a significantly greater FMC to diagnosis delay and diagnosis to wire delay compared to other places of origin. Only 2.2% of patients met the 10-min FMC to diagnosis target; 44.8% met the target of 90 min from diagnosis to wire in transferred patients, while 40.6% met the 60-min target for patients admitted to a PCI center. Median patient, electrocardiogram (ECG) and logistic delays are 92.0±146.0 min, 19.0±146.0 min and 15.5±46.3 min, respectively. CONCLUSION: A significant difference between state-of-the-art targets and reality was found, depending on the place of FMC, with the worst delays in non-PCI centers. Patient delay, ECG delay, FMC to diagnosis and logistic delay are identified as key areas in which to intervene.

Liquid antimicrobials: a national analysis of critical shortages.

Medicine shortages, especially those involving antibiotics, pose a global public health dilemma that can lead to adverse health outcomes. The aim of this study was to assess the supply situation of various antimicrobials in liquid dosage forms, which represent the mainstay of therapy for paediatric infections. The availability was examined over a period of 27 weeks in Austria. During the time period investigated, 34 products (81.0%) were not available for over 50% of the time; eight of those (19.0%) experienced complete unavailability. Only four products (9.5%) demonstrated continuous availability. Regarding penicillin antibiotics, amoxicillin was not available for 77.8% of the time (21 weeks) and amoxicillin/clavulanic acid for 59.3% (16 weeks). Regular monitoring of availability status can help mitigate this issue; however, cross-national strategies are urgently needed to guarantee a constant supply in the future.

Quality assurance standards and their use in the preparation of parenteral systemic anticancer therapy products in healthcare establishments: a scoping review.

OBJECTIVES: The use of parenteral systemic anticancer therapy (SACT) has led to improved cancer survival. A quality assurance (QA) system of the aseptic compounding process is necessary to ensure safe and consistent production of parenteral SACT. This scoping review identifies international evidence and practice relating to QA standards in the preparation of parenteral SACT in healthcare establishments. METHODS: Standards relating to aseptic compounding in hospital pharmacies and literature exploring the aseptic compounding of parenteral SACT were included. Literature relating to the non-aseptic compounding of medicines and records specific to sterile manufacturing in industrial settings were excluded. A search of several electronic databases, trial registries, the grey literature and websites of key European hospital pharmacy groups and accreditation bodies was conducted on 16 March 2022. A narrative discussion was performed by country, and content analysis of articles was conducted. RESULTS: Thirty-seven records were included. Standards reviewed covered the work environment, the preparation process and the safety of the workers who are potentially exposed to hazardous chemicals. It was a common practice to include frequent audits to ensure adherence to standards. Some standards also recommended external inspections to allow for further learnings. Periodic reviews are encouraged to ensure standards maintain relevance. National standards of the countries reviewed were based on international standards, with minor adaptations for local conditions. CONCLUSIONS: The main limitation of this review is that it is limited to countries with a high human development index. The review shows that the use of an internationally recognised standard as a basis for national standards is best practice, and will allow for relevance into the future.

The Patient-Centered Dental Home: A Framework for Quality Measurement, Improvement, and Integration.

OBJECTIVE: This study completed the development of a standardized patient-centered dental home (PCDH) framework to align and integrate with the patient-centered medical home. This study identified measure concepts and specific measures and standards to complete the 4-level measurement framework to implement and evaluate a PCDH. This study built on prior model development, which identified the PCDH definition and characteristics and the components nested within those characteristics. METHODS: An environmental scan identified existing oral health care quality measure concepts, measures, and standards for rating by the project's National Advisory Committee (NAC). A modified Delphi process, adapted from the RAND appropriateness method, was used to obtain structured feedback from the NAC. NAC members rated measure concepts on importance and, subsequently, specific measures and standards on feasibility, validity, and actionability using a 1 to 9 rating scale. Criteria for model inclusion were based on median ratings and rating dispersion. Open-ended comments were elicited to inform model inclusion as well as identify additional concepts. RESULTS: We identified more than 500 existing oral health care measures and standards. A structured process was used to identify a subset that best aligned with a PCDH for rating by the NAC. Four Delphi rounds were completed, with 2 rounds to rate measure concepts and 2 rounds to rate measures and standards. NAC quantitative ratings and qualitative comments resulted in a total of 61 measure concepts and 47 measures and standards retained for inclusion in the framework. CONCLUSIONS: The NAC ratings of measure concepts, and specific measures and standards nested within those concepts, completed the 4-level PCDH measurement framework. The resulting framework allows for the development and implementation of core measure sets to identify and evaluate a PCDH, facilitating quality improvement and dental-medical integration. KNOWLEDGE TRANSFER STATEMENT: Clinicians, payers, health care systems, and policy makers can use the results of this study to guide and assess implementation of the various components of a patient-centered dental home and to support dental-medical integration.

Understanding the biases to sepsis surveillance and quality assurance caused by inaccurate coding in administrative health data.

PURPOSE: Timely and accurate data on the epidemiology of sepsis are essential to inform policy decisions and research priorities. We aimed to investigate the validity of inpatient administrative health data (IAHD) for surveillance and quality assurance of sepsis care. METHODS: We conducted a retrospective validation study in a disproportional stratified random sample of 10,334 inpatient cases of age ≥ 15 years treated in 2015-2017 in ten German hospitals. The accuracy of coding of sepsis and risk factors for mortality in IAHD was assessed compared to reference standard diagnoses obtained by a chart review. Hospital-level risk-adjusted mortality of sepsis as calculated from IAHD information was compared to mortality calculated from chart review information. RESULTS: ICD-coding of sepsis in IAHD showed high positive predictive value (76.9-85.7% depending on sepsis definition), but low sensitivity (26.8-38%), which led to an underestimation of sepsis incidence (1.4% vs. 3.3% for severe sepsis-1). Not naming sepsis in the chart was strongly associated with under-coding of sepsis. The frequency of correctly naming sepsis and ICD-coding of sepsis varied strongly between hospitals (range of sensitivity of naming: 29-71.7%, of ICD-diagnosis: 10.7-58.5%). Risk-adjusted mortality of sepsis per hospital calculated from coding in IAHD showed no substantial correlation to reference standard risk-adjusted mortality (r = 0.09). CONCLUSION: Due to the under-coding of sepsis in IAHD, previous epidemiological studies underestimated the burden of sepsis in Germany. There is a large variability between hospitals in accuracy of diagnosing and coding of sepsis. Therefore, IAHD alone is not suited to assess quality of sepsis care.

Why should Medical Societies increasingly attend to their Specialist Title exams and why should medical professionals obtain it? / Por que as Sociedades Médicas devem cada vez mais cuidar de suas provas de Título de Especialista e porque os profissionais médicos devem obtê-lo?

ABSTRACT Medical societies must maintain high standards of competence and quality when awarding specialist titles, defining the certification criteria, taking into account the needs and realities of the health system and medical practice.

RESUMO As Sociedades Médicas devem manter padrões elevados de competência e qualidade na concessão dos Títulos de Especialista, com definição dos critérios de certificação, considerando as necessidades e realidades do sistema de saúde e da prática médica.

A Systems Approach for Assessing Low Back Pain Care Quality in Veterans Health Administration Chiropractic Visits: A Cross-Sectional Analysis.

OBJECTIVE: The purpose of this study was to explore a systemwide process for assessing components of low back pain (LBP) care quality in Veterans Health Administration (VHA) chiropractic visits using electronic health record (EHR) data. METHODS: We performed a cross-sectional quality improvement project. We randomly sampled 1000 on-station VHA chiropractic initial visits occurring from October 1, 2017, to September 30, 2018, for patients with no such visits within the prior 12 months. Characteristics of LBP visits were extracted from VHA national EHR data via structured data queries and manual chart review. We developed quality indicators for history and/or examination and treatment procedures using previously published literature and calculated frequencies of visits meeting these indicators. Visits meeting our history and/or examination and treatment indicators were classified as "high-quality" visits. We performed a regression analysis to assess associations between demographic/clinical characteristics and visits meeting our quality criteria. RESULTS: There were 592 LBP visits identified. Medical history, physical examination, and neurologic examination were documented in 76%, 77%, and 63% of all LBP visits, respectively. Recommended treatments, such as any manipulation, disease-specific education/advice, and therapeutic exercise, occurred in 75%, 69%, and 40% of chronic visits (n = 383), respectively. In acute/subacute visits (n = 37), any manipulation (92%), manual soft tissue therapy (57%), and disease-specific advice/education (54%) occurred most frequently. Female patients and those with a neck pain comorbid diagnosis were significantly less likely to have a "high-quality" visit, while other regression associations were non-significant. CONCLUSION: This study explored a systemwide process for assessing components of care quality in VHA chiropractic visits for LBP. These results produced a potential framework for uniform assessment of care quality in VHA chiropractic visits for LBP and highlight potential areas for improvements in LBP care quality assessments.

Measuring in-hospital quality multidimensionally by integrating patients', kin's and healthcare professionals' perspectives: development and validation of the FlaQuM-Quickscan.

BACKGROUND: Measuring quality is essential to drive improvement initiatives in hospitals. An instrument that measures healthcare quality multidimensionally and integrates patients', kin's and professionals' perspectives is lacking. We aimed to develop and validate an instrument to measure healthcare quality multidimensionally from a multistakeholder perspective. METHODS: A multi-method approach started by establishing content and face validity, followed by a multi-centre study in 17 Flemish (Belgian) hospitals to assess construct validity through confirmatory factor analysis, criterion validity through determining Pearson's correlations and reliability through Cronbach's alpha measurement. The instrument FlaQuM-Quickscan measures 'Healthcare quality for patients and kin' (part 1) and 'Healthcare quality for professionals' (part 2). This bipartite instrument mirrors 15 quality items and 3 general items (the overall quality score, recommendation score and intention-to-stay score). A process evaluation was organised to identify effective strategies in instrument distribution by conducting semi-structured interviews with quality managers. RESULTS: By involving experts in the development of quality items and through pilot testing by a multi-stakeholder group, the content and face validity of instrument items was ensured. In total, 13,615 respondents (5,891 Patients/kin and 7,724 Professionals) completed the FlaQuM-Quickscan. Confirmatory factor analyses showed good to very good fit and correlations supported the associations between the quality items and general items for both instrument parts. Cronbach's alphas supported the internal consistency. The process evaluation revealed that supportive technical structures and approaching respondents individually were effective strategies to distribute the instrument. CONCLUSIONS: The FlaQuM-Quickscan is a valid instrument to measure healthcare quality experiences multidimensionally from an integrated multistakeholder perspective. This new instrument offers unique and detailed data to design sustainable quality management systems in hospitals. Based on these data, hospital management and policymakers can set quality priorities for patients', kin's and professionals' care. Future research should investigate the transferability to other healthcare systems and examine between-stakeholders and between-hospitals variation.

One-step embedding method for maintaining orientation of pathological tissue specimens using agar thin films.

Pathological histology examination involves handling a variety of specimens that are cut according to regulations and placed in cassettes. Tissue fragments in the cassettes are then diagnosed after processing, embedding, thin sectioning, staining and other procedures using a processing machine. Maintaining tissue fragment order and orientation during these processes is important for accurate diagnosis. In this study, we present a method of maintaining tissue fragment order and orientation using a thin film of ultra-high-strength agar and evaluate its usefulness during tissue sectioning.Cassettes were prepared, each containing three pieces of porcine liver, and compared embedding time with and without agar thin films (ATFs). Embedding was performed by three medical laboratory scientists with different levels of experience.To enable one-step tissue sample embedding, ATFs were integrated with samples in the cassettes. This resulted in an average reduction of 6.22 s of embedding time per cassette compared with traditional embedding methods.Through the use of ATFs, tissue fragment order and orientation is maintained, and embedding process time shortened. Additionally, ATFs are easily prepared and stored in 10% neutral buffered formalin over extended periods, allowing for immediate use during sectioning. This method is ideal to implement in busy pathology laboratories.

A pilot study of half-value layer measurements using a semiconductor dosimeter for intraoral radiography.

Purpose: This pilot study was conducted to evaluate half-value layer (HVL) measurements obtained using a semiconductor dosimeter for intraoral radiography. Materials and Methods: This study included 8 aluminum plates, 4 of which were low-purity (less than 99.9%) and 4 high-purity (greater than 99.9%). Intraoral radiography was performed using an intraoral X-ray unit in accordance with the dental protocol at the authors' affiliated hospital: tube voltage, 60 kVp and 70 kVp; tube current, 7 mA; and exposure time, 0.10 s. The accuracy of HVL measurements for intraoral radiography was assessed using a semiconductor dosimeter. A simple regression analysis was performed to compare the aluminum plate thickness and HVL in relation to the tube voltage (60 kVp and 70 kVp) and aluminum purity (low and high). Results: For the low-purity aluminum plates, the HVL at 60 kVp (Y) and 70 kVp (Y) was significantly correlated with the thickness of the aluminum plate (X), with Y = 1.708 + 0.415X (r=0.999, P<0.05) and Y = 1.980 + 0.484X (r=0.999, P<0.05), respectively. Similarly, for the high-purity aluminum plates, the HVL at 60 kVp (Y) and 70 kVp (Y) was significantly correlated with the plate thickness (X), with Y = 1.696 + 0.454X (r=0.999, P<0.05) and Y = 1.968 + 0.515X (r=0.998, P<0.05), respectively. Conclusion: This pilot study examined the relationship between aluminum plate thickness and HVL measurements using a semiconductor dosimeter for intraoral radiography. Semiconductor dosimeters may prove useful in HVL measurement for purposes such as quality assurance in dental X-ray imaging.

Activating pharmacists to reduce the frequency of medication-related problems (ACTMed): a stepped wedge cluster randomised trial.

BACKGROUND: Medicines are the most frequent health care intervention type; their safe use provides significant benefits, but inappropriate use can cause harm. Systemic primary care approaches can manage serious medication-related problems in a timely manner. OBJECTIVES: ACTMed (ACTivating primary care for MEDicine safety) uses information technology and financial incentives to encourage pharmacists to work more closely with general practitioners to reduce the risk of harm, improve patients' experience of care, streamline workflows, and increase the efficiency of medical care. METHODS AND ANALYSIS: The stepped wedge cluster randomised trial in 42 Queensland primary care practices will assess the effectiveness of the ACTMed intervention. The primary outcome will be the proportion of people at risk of serious medication-related problems - patients with atrial fibrillation, heart failure, cardiovascular disease, type 2 diabetes, or asthma or chronic obstructive pulmonary disease - who experience such problems. We will also estimate the cost per averted serious medication-related problem and the cost per averted potentially preventable medication-related hospitalisation. ETHICS APPROVAL: The University of Queensland Human Research Ethics Committee approved the pilot (2021/HE002189) and trial phases of the ACTMed study (2022/HE002136). Access to Patron data was granted by the Patron Data Governance Committee (PAT052ACTMed). Access to linked hospitalisations and deaths data are subject to Public Health Act approval (pending). DISSEMINATION OF FINDINGS: A comprehensive dissemination plan will be co-developed by the researchers, the ACTMed steering committee and consumer advisory group, project partners, and trial site representatives. Aboriginal and Torres Strait Islander communities will be supported in leading community-level dissemination. TRIAL REGISTRATION: Australian New Zealand Clinical Trials Registry (pilot: ACTRN12622000595718; 21 April 2022; full trial: ACTRN12622000574741; 14 April 2022).

Stability assessment and content determination test of oral liquid forms of beclomethasone dipropionate prepared in hospital pharmacy.

OBJECTIVES: Oral beclomethasone dipropionate (BDP) is known for its use as a therapeutic medicine for gastrointestinal graft-versus-host disease (GI-GVHD). Despite growing demand for oral BDP formulation, no commercial forms have yet been marketed. Therefore, at the Tokyo Metropolitan Cancer and Infectious Disease Centre Komagome Hospital, pharmacists prepare oral liquid forms of BDP for patients with upper GI-GVHD. This study aims to develop a new high performance liquid chromatography (HPLC) method for measuring BDP in the prepared formulations and assessing its quality. METHODS: We developed a new HPLC method for measuring BDP in prepared formulations validated according to international guidelines. Three types of formulations were prepared and analysed using the validated HPLC method. One contains 1 mg of BDP per 30 mL aqueous solution, and the others using ethanol for preparation contain 1 mg of BDP per 15 mL aqueous solution. For stability assessment, the BDP contents were assayed while formulations were stored in plastic bottles for 8 weeks under two different conditions of 25°C in bright light and 4°C in darkness. A content determination test was also conducted to assess the individual contents of BDP and lot-to-lot variation in dosage units. RESULTS: A stability test demonstrated that the remaining BDP content after the storage period was greater than 90% of the initial content in almost all samples regardless of storage conditions. A content determination test showed thattwo new ethanol-containing formulations contained about 0.1 mg more BDP than the original ethanol-free formulation and it was close to the target BDP content of 1 mg. Furthermore, new formulations had less lot-to-lot BDP variation in dosage units than the original formulation. CONCLUSIONS: A new HPLC method for measuring BDP in prepared formulations was developed and validated. The results of the stability test and content determination test indicated that the newly designed formulations were superior to the conventional formulation.

Patterns of care for people with small cell lung cancer in Victoria, 2011-19: a retrospective, population-based registry data study.

OBJECTIVES: To report stage-specific patterns of treatment and the influence of management and treatment type on survival rates for people newly diagnosed with small cell lung cancer (SCLC). DESIGN: Cross-sectional patterns of care study; analysis of data prospectively collected for the Victorian Lung Cancer Registry (VLCR). SETTING, PARTICIPANTS: All people diagnosed with SCLC in Victoria during 1 April 2011 - 18 December 2019. MAIN OUTCOME MEASURES: Stage-specific management and treatment of people with SCLC; median survival time. RESULTS: During 2011-19, 1006 people were diagnosed with SCLC (10.5% of all lung cancer diagnoses in Victoria); their median age was 69 years (interquartile range [IQR], 62-77 years), 429 were women (43%), and 921 were current or former smokers (92%). Clinical stage was defined for 896 people (89%; TNM stages I-III, 268 [30%]; TNM stage IV, 628 [70%]) and ECOG performance status at diagnosis for 663 (66%; 0 or 1, 489 [49%]; 2-4, 174 [17%]). The cases of 552 patients had been discussed at multidisciplinary meetings (55%), 377 people had received supportive care screening (37%), and 388 had been referred for palliative care (39%). Active treatment was received by 891 people (89%): chemotherapy, 843 (84%); radiotherapy, 460 (46%); chemotherapy and radiotherapy, 419 (42%); surgery, 23 (2%). Treatment had commenced within fourteen days of diagnosis for 632 of 875 patients (72%). Overall median survival time from diagnosis was 8.9 months (IQR, 4.2-16 months; stage I-III: 16.3 [IQR, 9.3-30] months; stage IV: 7.2 [IQR, 3.3-12] months). Multidisciplinary meeting presentation (hazard ratio [HR], 0.66; 95% CI, 0.58-0.77), multimodality treatment (HR, 0.42; 95% CI, 0.36-0.49), and chemotherapy within fourteen days of diagnosis (HR, 0.68; 95% CI, 0.48-0.94) were each associated with lower mortality during follow-up. CONCLUSION: Rates of supportive care screening, multidisciplinary meeting evaluation, and palliative care referral for people with SCLC could be improved. A national registry of SCLC-specific management and outcomes data could improve the quality and safety of care.