Understanding the impact of environmentally relevant alkyl C12-16 dimethylbenzyl ammonium chloride concentrations on zebrafish health.

Alkyldimethylbenzylammonium chlorides (ADBACs), classified as second-generation quaternary ammonium compounds, are extensively employed across various sectors, encompassing veterinary medicine, food production, pharmaceuticals, cosmetics, ophthalmology, and agriculture. Consequently, significant volumes of ADBAC C12-C16 are discharged into the environment, posing a threat to aquatic organisms. Regrettably, comprehensive data regarding the toxicological characteristics of these compounds remain scarce. This research aimed to determine whether or not ADBAC C12-C16, at environmentally relevant concentrations (0.4, 0.8, and 1.6 µg/L), may instigate oxidative stress and alter the expression of apoptosis-related genes in the liver, brain, gut, and gills of Danio rerio adults (5-6 months). The findings revealed that ADBAC C12-C16 elicited an oxidative stress response across all examined organs following 96 h of exposure. Nonetheless, the magnitude of this response varied among organs, with the gills exhibiting the highest degree of susceptibility, followed by the gut, liver, and brain, in descending order. Only the gut and gills of the examined organs displayed a concentration-dependent reduction in the activity of superoxide dismutase (SOD) and catalase (CAT). Akin to the oxidative stress response, all organs exhibited a marked increase in bax, blc2, casp3, and p53 expression levels. However, the gills and gut manifested a distinctive suppression in the expression of nrf1 and nrf2. Our Principal Component Analysis (PCA) confirmed that SOD, CAT, nrf1, and nrf2 were negatively correlated to oxidative damage biomarkers and apoptosis-related genes in the gills and gut; meanwhile, in the remaining organs, all biomarkers were extensively correlated. From the above, it can be concluded that ADBAC C12-C16 in low and environmental concentrations may threaten the health of freshwater fish.

Efectividad de los desinfectantes Lysol® y Amonio Cuaternario durante la evaluación de tres áreas críticas del sillón odontológico / Antimicrobial effectiveness of Lysol® and quaternary ammonium during evaluation of three critical areas of the dental chair

Objetivo. Determinar la eficacia antimicrobiana de Lysol® y amonio cuaternario durante la evaluación de tres áreas críticas de la unidad dental (bandeja / botones de mando, respaldo del sillón odontológico y mango de la jeringa triple). Métodos. A través de un estudio experimental comparativo transversal, se analizó un universo de 8 sillones dentales: tres fueron desinfectadas con Lysol®; tres con amonio cuaternario; dos sillones se seleccionaron como controles (positivo y negativo). Todos los sillones odontológicos se muestrearon dos veces día: antes de comenzar y al finalizar su uso, durante tres días. La toma de muestras fue realizada en las Clínicas de la Universidad Hemisferios antes y después de la colocación del desinfectante; las muestras fueron transportadas en caldo de tioglicolato para ser analizadas. Se sembraron diluciones 1:2 y 1:10 de cada muestra en Agar Plate Count y se incubaron por 24 horas a 37°C. Posteriormente, se realizó un recuento de colonias por duplicado, analizándose un total de 864 muestras. Resultados. Lysol® y amonio cuaternario 5% mostraron igual efectividad antimicrobiana ante las tres áreas analizadas (p>0.05); el área en la que se halló una mayor cantidad de microorganismos fue la bandeja (incluyendo botones de mando). Conclusión. Se determinó que tanto Lysol® como amonio cuaternario 5% son altamente eficaces para eliminar los microorganismos presentes en las superficies críticas de la unidad dental; además, el área más contaminada antes del uso de los tratamientos fue la bandeja, incluyendo los botones de mando.

Objective. Determine the antimicrobial efficacy of Lysol® and quaternary ammonium during the evaluation of three critical areas of the dental unit (control tray/buttons, dental chair back, and triple syringe handle). Methods. Through a cross-sectional comparative experimental study, a total of 8 dental chairs were analyzed: three were disinfected with Lysol®, three with quaternary ammonium, and two armchairs were selected as controls (positive and negative). All dental chairs were sampled twice a day: before use and at the end of use, for three days. Sampling was carried out at the Hemisferios University Clinics before and after the application of the disinfectant. The samples were transported in thioglycollate broth for analysis. 1:2 and 1:10 dilutions of each sample were plated on Plate Count Agar and incubated for 24 hours at 37°C. Subsequently, duplicate colony counts were performed, analyzing a total of 864 samples. Results. Lysol® and 5% quaternary ammonium showed equal antimicrobial effectiveness against the three areas analyzed (p>0.05). The area with the highest number of microorganisms was the tray (including control buttons). Conclusion. It was determined that both Lysol® and 5% quaternary ammonium are highly effective in eliminating microorganisms present on the critical surfaces of the dental unit. Furthermore, the tray, including the control buttons, was found to be the most contaminated area before treatment.

Biofilm formation by Listeria monocytogenes from the meat processing industry environment and the use of different combinations of detergents, sanitizers, and UV-A radiation to control this microorganism in planktonic and sessile forms.

This study aimed to evaluate the ability of biofilm formation by L. monocytogenes from the meat processing industry environment, as well as the use of different combinations of detergents, sanitizers, and UV-A radiation in the control of this microorganism in the planktonic and sessile forms. Four L. monocytogenes isolates were evaluated and showed moderate ability to form biofilm, as well as carried genes related to biofilm production (agrB, agrD, prfA, actA, cheA, cheY, flaA, sigB), and genes related to tolerance to sanitizers (lde and qacH). The biofilm-forming isolates of L. monocytogenes were susceptible to quaternary ammonium compound (QAC) and peracetic acid (PA) in planktonic form, with minimum inhibitory concentrations of 125 and 75 ppm, respectively, for contact times of 10 and 5 min. These concentrations are lower than those recommended by the manufacturers, which are at least 200 and 300 ppm for QAC and PA, respectively. Biofilms of L. monocytogenes formed from a pool of isolates on stainless steel and polyurethane coupons were subjected to 14 treatments involving acid and enzymatic detergents, QAC and PA sanitizers, and UV-A radiation at varying concentrations and contact times. All treatments reduced L. monocytogenes counts in the biofilm, indicating that the tested detergents, sanitizers, and UV-A radiation exhibited antimicrobial activity against biofilms on both surface types. Notably, the biofilm formed on polyurethane showed greater tolerance to the evaluated compounds than the biofilm on stainless steel, likely due to the material's surface facilitating faster microbial colonization and the development of a more complex structure, as observed by scanning electron microscopy. Listeria monocytogenes isolates from the meat processing industry carry genes associated with biofilm production and can form biofilms on both stainless steel and polyurethane surfaces, which may contribute to their persistence within meat processing lines. Despite carrying sanitizer tolerance genes, QAC and PA effectively controlled these microorganisms in their planktonic form. However, combinations of detergent (AC and ENZ) with sanitizers (QAC and PA) at minimum concentrations of 125 ppm and 300 ppm, respectively, were the most effective.

Cytotoxicity evaluation, antibacterial effect, and degree of conversion of QAM-containing adhesives

Abstract The aim of this study was to evaluate the influence of adding quaternary ammonium methacrylates (QAMs) to experimental adhesives by assessing the degree of conversion (DC), cytotoxicity against keratinocytes and fibroblasts, and antibacterial activity against biofilm formation. Two QAMs were added to an experimental adhesive: dimethylaminododecyl methacrylate bromododecane (DMADDM) or dimethylaminododecyl methacrylate bromohexadecane (DMAHDM) at three concentrations each: 1, 2.5, and 5 wt.%. Experimental adhesive without QAMs (control group) and commercially available Transbond XT Primer (3M Unitek, Monrovia, California, USA) were used for comparisons. The adhesives were tested for DC, cytotoxicity against keratinocytes and fibroblasts, and antibacterial activity against biofilm formation. DC, cytotoxicity against fibroblasts, and antibacterial activity were analyzed using one-way ANOVA and Tukey's multiple comparisons. Cytotoxicity against keratinocytes was evaluated using the Kruskal Wallis and Dunn's post-hoc (α = 5%) tests. Transbond showed lower DC as compared to 5% DMAHDM, 1% DMADDM, and 5% DMADDM (p < 0.05). However, all groups presented proper DC when compared to commercial adhesives in the literature. In the evaluation of cytotoxicity against keratinocytes, Transbond induced higher viability than 2.5 wt.% groups (p < 0.05). Against fibroblasts, Transbond induced higher viability as compared to 5 wt.% groups (p < 0.05). DMAHDM at 5 wt.% reduced biofilm formation when compared to all the other groups (p < 0.05). Despite their cytotoxic effect against keratinocytes, gingival fibroblasts showed higher viability. DMAHDM at 5 wt.% decreased Streptococcus mutans viability. The incorporation of DMAHDM at 5 wt.% may be a strategy for reducing the development of white spot lesions.

Resistência a compostos quaternário de amônio em patógenos humanos e animais nas últimas décadas: uma revisão sistemática / Resistance to quaternary ammonium compounds in human and animal pathogens in recent decades: A systematic review / Resistencia a compuestos de amonio cuaternario en patógenos humanos y animales en las últimas décadas: una revisión sistemática

RESUMO Introdução: compostos quaternários de amônio (QACs) estão disponíveis desde 1908 e são amplamente utilizados como sanitizantes em ambientes diversos. No entanto, a utilização de concentrações subinibitórias de QACs tem sido relacionada com desenvolvimento da resistência microbiana. Material e métodos: nesse estudo, a partir de um levantamento teórico em bases de dados da literatura biomédica seguindo as orientações da Cochrane handbook, foi realizada uma análise do panorama atual de resistência aos QACs em bactérias de interesse médico e veterinário. Após a seleção dentro dos 1996 artigos encontrados na busca literária, 7 estudos que avaliaram o perfil de susceptibilidade ao cloreto de benzalcônio em bactérias patogênicas foram incluídos. Resultados: a análise dos estudos revelou que dentre os potenciais patógenos humanos e animais, a resistência aos QACs é mais investigada em bactérias Gram-negativas tais como Pseudomonas aeruginosa e Acinetobacter baumannii. Nessas espécies, em alguns isolados foi detectada resistência concomitante aos QACs e antimicrobianos de relevância clínica. Um único estudo mostrou resistência em bactérias Gram-positivas, revelando que o Enterococcus faecium apresenta alto potencial de se tornar resistente aos QACs. Dentre os mecanismos de resistência aos QACs, destaca-se a presença do gene qacE o qual foi reportado em três dos estudos incluídos. Conclusão: apesar da relevância da resistência aos QACs entre bactérias patogênicas, poucos estudos têm sido conduzidos para monitorar esse evento. Assim, a negligência na vigilância epidemiológica de resistência a esses sanitizantes certamente impactará sua eficácia em um futuro próximo.

SUMMARY Introduction: Quaternary ammonium compounds (QACs) have been available since 1908 and are widely used as sanitizers in diverse environments. However, the use of subinhibitory concentrations of QACs has been related to the development of microbial resistance. Material and methods: In this study, based on a theoretical survey in biomedical literature databases following the guidelines of the Cochrane handbook, an analysis of the current situation of resistance to QACs in bacteria of medical and veterinary interest was carried out. After selection within the 1996 articles found in the literature search, 7 studies that evaluated the profile of susceptibility to benzalkonium chloride in pathogenic bacteria were included. Results: The analysis of the studies revealed that among potential human and animal pathogens, resistance to QACs is most investigated in Gram-negative bacteria such as Pseudomonas aeruginosa and Acinetobacter baumannii. In these species, in some isolates, concomitant resistance to QACs and clinically relevant antimicrobials was detected. A single study showed resistance in Gram-positive bacteria, revealing that Enterococcus faecium has a high potential to become resistant to QACs. Among the mechanisms of resistance to QACs, the presence of the qacE gene stands out, which was reported in three of the included studies. Conclusion: Despite the relevance of resistance to QACs among pathogenic bacteria, few studies have been conducted to monitor this event. Thus, negligence in the epidemiological surveillance of resistance to these sanitizers will certainly impact their effectiveness in the near future.

RESUMEN Introducción: los compuestos de amonio cuaternario (QAC) están disponibles desde 1908 y se utilizan ampliamente como desinfectantes en diversos entornos. Sin embargo, el uso de concentraciones subinhibitorias de QAC se ha relacionado con el desarrollo de resistencia microbiana. Material y métodos: en este estudio, a partir de un relevamiento teórico en bases de datos de literatura biomédica siguiendo los lineamientos del Manual Cochrane, se realizó un análisis de la situación actual de la resistencia a los QAC en bacterias de interés médico y veterinario. Se encontraron 1996 artículos en la búsqueda bibliográfica y en esta revisión se incluyeron 7 estudios que evaluaron el perfil de susceptibilidad al cloruro de benzalconio en bacterias patógenas. Resultados: se observó que entre los posibles patógenos humanos y animales, la resistencia a los QAC se investiga más en bacterias Gram negativas como Pseudomonas aeruginosa y Acinetobacter baumannii. En estas especies, en algunos aislados, se detectó resistencia concomitante a los QAC y a los antimicrobianos clínicamente relevantes. Un solo estudio mostró resistencia en bacterias Gram-positivas, revelando que Enterococcus faecium tiene un alto potencial para volverse resistente a los QAC. Entre los mecanismos de resistencia a los QAC, se destaca la presencia del gen qacE, reportado aquí en tres estudios incluidos. Conclusión: a pesar de la relevancia de la resistencia a los QAC entre las bacterias patógenas, se han realizado pocos estudios para monitorear este evento. Por lo tanto, la negligencia en la vigilancia epidemiológica de la resistencia a estos desinfectantes ciertamente afectará su efectividad en el futuro.

Influence of Quaternary Ammonium Salt Functionalized Chitosan Additive as Sustainable Filler for High-Density Polyethylene Composites.

In this study, an antimicrobial packaging material was successfully developed with blends of high-density polyethylene (HDPE) and chitosan (CS) made by melt processing. In the different HDPE/CS composites, the CS content effect (up to 40%), and the addition of quaternary ammonium salt functionalized chitosan (CS-CTAB) as an additive were evaluated by X-ray diffraction (XRD), differential scanning calorimetry (DSC), thermogravimetric analyses (TG), tensile strength, scanning electron microscopy (SEM) and antimicrobial activity. When analyzing the effect of the additive in the different HDPE/CS composites, it was observed that the compositions with 10 and 20 %wt of chitosan showed better elongation values (~13% and 10%) as well as a higher decomposition temperature at 20% mass loss (T20) varying from (321-332 °C and 302-312 °C), respectively, in relation to the other compositions, regardless of the type of additive used, it acted as an antimicrobial agent, promoting inhibition of microbial growth against the strains gram-positive and gram-negative used in this work, making the different HDPE/CS composites suitable candidates for use in food packaging.

Alkyl trimethyl ammonium bromide for the formulation of antibacterial orthodontic resins.

OBJECTIVES: This study aimed at formulating antibacterial orthodontic resins containing alkyl trimethyl ammonium bromide (ATAB) and evaluating their physicochemical and biological properties. MATERIALS AND METHODS: The chemical composition and microstructure of ATAB was characterized through FTIR and SEM, respectively. Experimental orthodontic BisGMA/TEGDMA-based resins were formulated, and the ATAB filler was incorporated at 1wt%, 5wt%, and 10wt%, along with colloidal silica (5wt%). The degree of conversion, softening in solvent, and flexural strength of the experimental resins were analyzed. Biological properties were also assessed through cytotoxicity and antibacterial analyses. RESULTS: The incorporation of ATAB, due to the presence of ⎯N+(CH3)3 alkyl groups, had no adverse effect on the degree of conversion of the resins (p > 0.05). The %ΔKHN values at 5wt% and 10wt% were comparable to those of the control group, while the flexural strength was reduced at all concentrations of ATAB. The viability of the gingival fibroblast was reduced with the addition of ATAB (p < 0.05). The viability of biofilm and planktonic bacteria was reduced when ATAB was incorporated at 5wt% and 10wt%. CONCLUSIONS: The addition of ATAB at 5wt% resulted suitable for the formulation of orthodontic resins with the ability to control the biofilm formation and planktonic activity of S.mutans, without jeopardizing some specific physicochemical properties. CLINICAL RELEVANCE: White spot lesions in orthodontic patients may be controlled by preventive treatments. Non-patient-dependent strategies, such as the use of orthodontic resins containing ATAB, may avoid accumulation of bacteria, especially in those areas surrounding orthodontic appliances.

Evaluation of the Persistence and Characterization of Listeria monocytogenes in Foodservice Operations.

Listeria monocytogenes is a major foodborne pathogen that can contaminate food products and colonize food-producing facilities. Foodservice operations (FSOp) are frequently responsible for foodborne outbreaks due to food safety practices failures. We investigated the presence of and characterized L. monocytogenes from two FSOp (cafeterias) distributing ready-to-eat meals and verified FSOp's compliance with good manufacturing practices (GMP). Two facilities (FSOp-A and FSOp-B) were visited three times each over 5 months. We sampled foods, ingredients, and surfaces for microbiological analysis, and L. monocytogenes isolates were characterized by phylogenetic analyses and phenotypic characteristics. GMP audits were performed in the first and third visits. A ready-to-eat salad (FSOp-A) and a frozen ingredient (FSOp-B) were contaminated with L. monocytogenes, which was also detected on Zone 3 surfaces (floor, drains, and a boot cover). The phylogenetic analysis demonstrated that FSOp-B had persistent L. monocytogenes strains, but environmental isolates were not closely related to food or ingredient isolates. GMP audits showed that both operations worked under "fair" conditions, and "facilities and equipment" was the section with the least compliances. The presence of L. monocytogenes in the environment and GMP failures could promote food contamination with this pathogen, presenting a risk to consumers.

Resistencia antimicrobiana y daño al medio ambiente, en el contexto COVID-19: Una revisión sistemática / Antimicrobial resistance and damage to the environment, in the context of COVID-19: A systematic review

Las pautas de abordaje de los pacientes con COVID-19, al inicio de la pandemia, se realizó por ensayo, ya que se desconocía la fisiopatología de esta nueva enfermedad, entre las acciones médicas se describió el uso de antiboticoterapias de manera indiscriminada, también se instó a realizar desinfección profundas, muchas veces, con sustancias químicas con impacto negativo en la salud ambiental, tanto a nivel de la microbiota encargada del equilibrio ecológico, como en la contaminación ambiental, principalmente del agua. Aunado a esto, debido a la emergencia sanitaria, se requirió usar en mayor cantidad equipos de protección personal de un solo uso y, como consecuencias el aumento de desechos sólidos peligrosos, cuya composición son de degradación tardía. Por tanto, la respuesta sanitaria ante la pandemia, probablemente fue escenario para acentuar la resistencia antimicrobiana y el riesgo de daño ambiental. En este, artículo se realizó una revisión sistemática de la literatura científicas en torno a estos tópicos, las evidencias demostraron el aumento de mecanismos de resistencias de bacterias, principalmente, patógenas del tracto respiratorio. De igual manera, el impacto negativo por uso irracional de desinfectantes químicos, traducido en bacterias resistentes especialmente a compuestos de amonio cuaternario. La bioacumulación y biomagnificación de estas sustancias ha provocado toxicidad, mutaciones, propagación de genes de resistencia. Por lo tanto, se sugiere que se priorice las estrategias que mitiguen el rastro que ha venido extendiéndose al paso de la pandemia por el SAR- CoV-2(AU)

The guidelines for the approach of patients with COVID-19, at the beginning of the pandemic, were carried out by trial, since the pathophysiology of this new disease was unknown, among the medical actions the use of antibiotic therapies indiscriminately was described, also the urged to carry out deep disinfection, many times, with chemical substances with a negative impact on environmental health, both at the level of the microbiota responsible for the ecological balance, and in environmental pollution, mainly of water. In addition to this, due to the health emergency, it was required to use more single-use personal protective equipment and, as a consequence, the increase in hazardous solid waste, whose composition is delayed degradation. Therefore, the health response to the pandemic was probably the setting to accentuate antimicrobial resistance and the risk of environmental damage. In this article, a systematic review of the scientific literature on these topics was carried out, the evidence demostrated the increase in resistance mechanisms of bacteria, mainly pathogens of the respiratory tract. Anyways, the negative impact due to the irrational use of chemical disinfectants, translated into resistant bacteria, especially to quaternary ammonium compounds. The bioaccumulation and biomagnification of these substances has caused toxicity, mutations, propagation of resistance genes. Therefore, it is suggested that strategies be prioritized that mitigate the trail that has been spreading as the pandemic passed by SAR-CoV-2(AU)

A comprehensive review of the antibacterial activity of dimethylaminohexadecyl methacrylate (DMAHDM) and its influence on mechanical properties of resin-based dental materials.

The repetitive restorative cycle should be avoided, aiming at the smallest number of restorations' replacements to ensure greater tooth longevity. Antibacterial materials associated with the control of caries etiological factors can help improve restoration's durability. This review aimed to analyze the results of in vitro studies that added Dimethylaminohexadecyl methacrylate (DMAHDM), an antibacterial monomer, to restorative materials. The PubMed, SCOPUS, Web of Science, and Biblioteca Virtual em Saúde databases were screened for studies published between 2015 and 2020. After full-text reading, 24 articles were included in the final sample. DMAHDM has demonstrated antibacterial efficacy against several bacteria related to dental caries and periodontal diseases, causing a transition in the biofilm balance without inducing resistance. When DMAHDM was included in acrylic resin, the material cytotoxicity increased, and changes in mechanical properties were observed. In contrast, resin composites had their mechanical properties maintained in most studies; however, toxicity was not examined. The association between DMAHDM and 2-methacryloyloxyethyl phosphorylcholine or silver nanoparticles improved the antibacterial effect. Besides, the association with nanoparticles of amorphous calcium phosphate or nanoparticles of calcium fluoride can provide remineralization capacity. There is a lack of information on the cytotoxicity and bacteria resistance induction, and further studies are needed to address this.

Efficacy of Disinfectants against Fusarium oxysporum f. sp. cubense Tropical Race 4 Isolated from La Guajira, Colombia.

Banana, the main export fruit for Colombia, is threatened by Fusarium wilt (FWB), caused by Fusarium oxysporum f. sp. cubense (Foc), tropical race 4 (TR4). Pathogen containment through disinfecting tools, machinery, shoes, and any means that may carry contaminated soil particles with proper disinfectants is at the forefront of disease management. In this study, the biocide efficacy of 10 commercial quaternary ammonium compounds (QACs) products and one based on glutaraldehyde (GA) were evaluated on both reproductive structures (microconidia and macroconidia) and survival spores (chlamydospores) of Foc TR4 (strain 140038) isolated from La Guajira, Colombia. QACs were evaluated at 1200 ppm and two exposure times: <1 and 15 min in the absence or presence of soil. For GA disinfectant, four different concentrations (500, 800, 1200, and 2000 ppm) were evaluated at both contact times in the presence of soil. In the absence of soil, all QACs showed 100% biocidal efficiency against microconidia, macroconidia, and chlamydospores at both <1 and 15 min. The presence of soil decreased the efficacy of disinfectants, but some of them, such as QAC3_1st, QAC7_4th, and QAC5_4th, showed 98%, 98%, and 100% efficacy against Foc TR4 chlamydospores, respectively, after <1 min of contact time. For instance, the GA-based disinfectant was able to eliminate all Foc TR4 propagules after 15 min for all concentrations tested.

Antimicrobial resistance of Staphylococcus spp. isolated from organic and conventional Minas Frescal cheese producers in São Paulo, Brazil.

The genus Staphylococcus is recognized worldwide as a cause of bacterial infections in humans and animals. Antibiotics used in dairy cattle combined with ineffective control can increase antimicrobial resistance. The objective of this study was to characterize 95 Staphylococcus strains isolated from organic and conventional Minas Frescal cheese production regarding antibiotic resistance (phenotype and genotype), presence of sanitizer-resistant genes and biofilm-formation genes, and SCCmec typing. Most strains (25.3%) showed higher resistance to penicillin, followed by oxacillin (21.1%) and clindamycin (11.6%). Among antibiotic resistance genes, the most prevalent were blaZ (25.3%), mecA (13.7%), lsaB (6.3%), msrA (4.2%), ant4 (3.2%), and tetM (2.1%); among sanitizer-resistance genes they were qacA/B (5.3%) and qacC (6.3%); and among biofilm, bap (4.2%), icaA (29.5%), icaD (41.1%). However, there was no statistically significant difference between organic and conventional dairy products, possibly due to the lack of synthetic antibiotic use on conventional farms during the sample collection period. Methicillin-resistant Staphylococcus aureus (MRSA) had their SCCmec identified as types I and IVc, and the methicillin-resistant coagulase-negative staphylococci had nontypeable SCCmec. These results suggest that there are antibiotic-resistant strains in both organic and conventional Minas Frescal cheese production in the state of São Paulo, Brazil. This supports the idea that improved quality control is needed from the milking stage up to the final product.

Action of benzalkonium chloride in different pH

Ammonium quaternary compounds are widely used in poultry and swine production as disinfectants in the control of pathogens. They act on gram-positive bacteria, gram-negative bacteria, enveloped fungi and viruses. However, in some conditions of pH and presence of organic matter can be inactivated. This study evaluated the action of ammonium quaternary compounds at 1:1,000 and 1:2,000 dilutions against Salmonella enterica serovarTyphimurium and Salmonella enterica serovar Enteritidis in the presence of three different organic matter simulators, fetal bovine serum, skim milk and whole milk concentration of 1, 3, 5, and 7% and at pH 6 and 9, with 15 min of contact. It was possible to verify that the organic matter simulators adjusted in the same conditions of contact time and percentage, in the in vitro tests, presented different results and the fetal bovine serum did not inactivate the disinfectant. However, the best result against S. Typhimurium and S. Enteritidis was obtained at pH 6 at the dilution of 1:1,000 in all organic matter simulators.

Action of benzalkonium chloride in different pH

ABSTRACT Ammonium quaternary compounds are widely used in poultry and swine production as disinfectants in the control of pathogens. They act on gram-positive bacteria, gram-negative bacteria, enveloped fungi and viruses. However, in some conditions of pH and presence of organic matter can be inactivated. This study evaluated the action of ammonium quaternary compounds at 1:1,000 and 1:2,000 dilutions against Salmonella enterica serovarTyphimurium and Salmonella enterica serovar Enteritidis in the presence of three different organic matter simulators, fetal bovine serum, skim milk and whole milk concentration of 1, 3, 5, and 7% and at pH 6 and 9, with 15 min of contact. It was possible to verify that the organic matter simulators adjusted in the same conditions of contact time and percentage, in the in vitro tests, presented different results and the fetal bovine serum did not inactivate the disinfectant. However, the best result against S. Typhimurium and S. Enteritidis was obtained at pH 6 at the dilution of 1:1,000 in all organic matter simulators.

Physicochemical properties and biological effects of quaternary ammonium methacrylates in an experimental adhesive resin for bonding orthodontic brackets

Abstract Fixed orthodontic appliances may lead to biofilm accumulation around them that may increase caries risk. This study aimed to evaluate the influence of quaternary ammonium methacrylates (QAMs) on the physicochemical properties, cytotoxicity, and antibacterial activity of adhesive resins for orthodontic purposes. Methodology: A base resin was prepared with a comonomer blend and photoinitiator/co-initiator system. Two different QAMs were added to the base adhesive: dimethylaminododecyl methacrylate at 5 wt.% (DMADDM) or dimethylaminohexadecyl methacrylate (DMAHDM) at 10 wt.%. The base adhesive, without QAMs, (GC) and the commercial Transbond™ XT Primer 3M (GT) were used as control. The resins were tested immediately and after six months of aging in the water regarding the antibacterial activity and shear bond strength (SBS). The antibacterial activity was tested against Streptococcus mutans via metabolic activity assay (MTT test). The groups were also tested for the degree of conversion (DC) and cytotoxicity against keratinocytes. Results: The resins containing QAM showed antibacterial activity compared to the commercial material by immediately reducing the metabolic activity by about 60%. However, the antibacterial activity decreased after aging (p<0.05). None of the groups presented any differences for SBS (p>0.05) and DC (p>0.05). The incorporation of DMADDM and DMAHDM significantly reduced the keratinocyte viability compared to the GT and GC groups (p<0.05). Conclusion: Both adhesives with QAMs showed a significant reduction in bacterial metabolic activity, but this effect decreased after water aging. Lower cell viability was observed for the group with the longer alkyl chain-QAM, without significant differences for the bonding ability and degree of conversion. The addition of QAMs in adhesives may affect the keratinocytes viability, and the aging effects maybe decrease the bacterial activity of QAM-doped materials.

Myristyltrimethylammonium Bromide (MYTAB) as a Cationic Surface Agent to Inhibit Streptococcus mutans Grown over Dental Resins: An In Vitro Study.

This in vitro study evaluated the effect of myristyltrimethylammonium bromide (MYTAB) on the physical, chemical, and biological properties of an experimental dental resin. The resin was formulated with dental dimetacrylate monomers and a photoinitiator/co-initiator system. MYTAB was added at 0.5 (G0.5%), 1 (G1%), and 2 (G2%) wt %, and one group remained without MYTAB and was used as the control (GCtrl). The resins were analyzed for the polymerization kinetics, degree of conversion, ultimate tensile strength (UTS), antibacterial activity against Streptococcus mutans, and cytotoxicity against human keratinocytes. Changes in the polymerization kinetics profiling were observed, and the degree of conversion ranged from 57.36% (±2.50%) for G2% to 61.88% (±1.91%) for G0.5%, without a statistically significant difference among groups (p > 0.05). The UTS values ranged from 32.85 (±6.08) MPa for G0.5% to 35.12 (±5.74) MPa for GCtrl (p > 0.05). MYTAB groups showed antibacterial activity against biofilm formation from 0.5 wt % (p < 0.05) and against planktonic bacteria from 1 wt % (p < 0.05). The higher the MYTAB concentration, the higher the cytotoxic effect, without differences between GCtrl e G0.5% (p > 0.05). In conclusion, the addition of 0.5 wt % of MYTAB did not alter the physical and chemical properties of the dental resin and provided antibacterial activity without cytotoxic effect.

Quaternary ammonium compound as antimicrobial agent in resin-based sealants.

OBJECTIVES: The aim of this study was to evaluate the influence of [2-(methacryloyloxy)ethyl] trimethylammonium chloride (METAC) in the physico-chemical properties, antibacterial activity and cytotoxicity of an experimental resin-based sealant. MATERIALS AND METHODS: An experimental resin-based sealant was formulated with dimethacrylates and a photoinitiator system. METAC was added at 2.5 wt.% (G2.5%) and 5 wt.% (G5%) into the experimental resin-based sealant, and one group remained without METAC as control (GCTRL). The resin-based sealants were analysed for polymerization behaviour and degree of conversion (DC), Knoop hardness (KHN) and softening in solvent (ΔKHN), ultimate tensile strength (UTS), contact angle, surface free energy (SFE), immediate and long-term micro-shear bond strength (µ-SBS) and antibacterial activity and cytotoxicity against human keratinocytes. RESULTS: The experimental resin-based sealants presented different polymerization behaviours without significant differences in the DC (p > 0.05). There was no significant difference for initial KHN (p > 0.05). The ΔKHN ranged from 51.62 (±3.70)% to 62.40 (±4.14)%, with higher values for G5% (p < 0.05). G2.5% and G5% had decreased µ-SBS between immediate and long-term tests (p < 0.05) without significant differences among groups in the immediate and long-term analyses (p > 0.05). There were no significant differences for UTS, contact angle and SFE among groups (p > 0.05). G2.5% and G5% presented immediate and long-term antibacterial activity (p < 0.05) without cytotoxicity compared to GCTRL (p > 0.05). CONCLUSION: The addition of METAC provided antibacterial activity to the experimental resin-based sealant. CLINICAL RELEVANCE: METAC is an effective quaternary ammonium compound as an antibacterial agent for resin-based sealants without cytotoxic effects against human keratinocytes.

Cellulose in Ionic Liquids and Alkaline Solutions: Advances in the Mechanisms of Biopolymer Dissolution and Regeneration.

This review is focused on assessment of solvents for cellulose dissolution and the mechanism of regeneration of the dissolved biopolymer. The solvents of interest are imidazole-based ionic liquids, quaternary ammonium electrolytes, salts of super-bases, and their binary mixtures with molecular solvents. We briefly discuss the mechanism of cellulose dissolution and address the strategies for assessing solvent efficiency, as inferred from its physico-chemical properties. In addition to the favorable effect of lower cellulose solution rheology, microscopic solvent/solution properties, including empirical polarity, Lewis acidity, Lewis basicity, and dipolarity/polarizability are determinants of cellulose dissolution. We discuss how these microscopic properties are calculated from the UV-Vis spectra of solvatochromic probes, and their use to explain the observed solvent efficiency order. We dwell briefly on use of other techniques, in particular NMR and theoretical calculations for the same purpose. Once dissolved, cellulose is either regenerated in different physical shapes, or derivatized under homogeneous conditions. We discuss the mechanism of, and the steps involved in cellulose regeneration, via formation of mini-sheets, association into "mini-crystals", and convergence into larger crystalline and amorphous regions. We discuss the use of different techniques, including FTIR, X-ray diffraction, and theoretical calculations to probe the forces involved in cellulose regeneration.

Experimental composites containing quaternary ammonium methacrylates reduce demineralization at enamel-restoration margins after cariogenic challenge.

OBJECTIVE: This study evaluated the influence of experimental composites containing quaternary ammonium monomers (QAM) at different concentrations and alkyl chains on demineralization at enamel-composite margins after cariogenic challenge. METHODS: Standardized 4×4mm cavities were cut into 35 bovine enamel blocks, which were randomly divided into seven groups (n=5) and restored with the following experimental composites and commercial materials: (G12.5) - 5% dimethylaminododecyl methacrylate (DMADDM) with a 12-carbon alkyl chain (G12.10) - 10% DMADDM, (G16.5) - 5% dimethylaminohexadecyl methacrylate (DMAHDM) with a 16-carbon alkyl chain (G16.10) - 10% DMAHDM, (CG) - control group (without QAM), (GZ250) - commercial composite (Filtek Z250®), and (GIC) - glass ionomer cement (Maxxion R®). After restorative procedures, initial microhardness was measured and experimental composites were subjected to Streptococcus mutans biofilm formation for 48h. After cariogenic challenge, the samples were washed and microhardness was reassessed. A 3D non-contact profilometer was used to determine surface roughness and enamel demineralization was assessed by micro-CT. Microhardness results were analyzed by the Kruskal-Wallis and Mann-Whitney tests and micro-CT results were analyzed by Tukey's HSD test (95% confidence interval). RESULTS: None of the materials could prevent mineral loss at the enamel-restoration margins. The addition of 10% DMAHDM yielded the lowest, albeit statistically significant, mineral loss (p<0.05). 3D non-contact profilometry showed enamel surface roughness modification after biofilm exposure. The CG had the highest roughness values. Micro-CT analysis revealed mineral loss, except for GIC. SIGNIFICANCE: The addition of 10% QAM with a 16-carbon chain in experimental composites reduced mineral loss at the enamel-restoration margins after cariogenic challenge.

Antifungal activity of commercial sanitizers against strains of Penicillium roqueforti, Penicillium paneum, Hyphopichia burtonii, and Aspergillus pseudoglaucus: Bakery spoilage fungi.

Information on the sensitivity of spoilage fungi of bakery products to sanitizing agents is scarce in the literature. Thus, the aim of this study was to evaluate the antifungal activity of different classes of commercial sanitizers, which have permitted use in the food industry, on the main fungi involved in spoiling bakery products. The tests were carried out according to the protocol for testing the antifungal effect of chemical sanitizers of the European Committee for Standardization (CEN), with adaptations. Different strains of six isolated fungal species responsible for spoiling bakery products (Penicillium roqueforti, Penicillium paneum, Hyphopichia burtonii, and Aspergillus pseudoglaucus) were tested against five sanitizers at three concentrations: benzalkonium chloride (0.3%, 2.5%, 5%), biguanide (2%, 3.5%, 5%), peracetic acid (0.15%, 1.5%, 3%), quaternary ammonium (0.3%, 2.5%, 5%), and sodium hypochlorite (0.01%, 0.1%, 0.2%). Peracetic acid was the most effective sanitizes considering the genera, species, and concentrations evaluated, generally being capable of reductions between 2 and 4 logs of initial control tested. Biguanide should not be the compound of choice when the main goal of the bakery industry is fungal control.